Used Ajk Palletbak + Aluminium Zijborden for sale (1,845)

Condition: excellent (used), functionality: fully functional, Year of construction: 2025, overall weight: 233 kg, total height: 6,149 mm, total length: 3,920 mm, total width: 2,733 mm, load capacity: 500 kg, working height: 5,819 mm, chain length: 10,000 mm, height adjustment type: mechanical, REID Lifting PORTA-GANTRY TC1 mobile aluminium gantry crane in very good condition and fully functional. The gantry crane has only been used for approximately 14 days on a single project. After completion of the project, it was dismantled. Technical specifications: - Manufacturer: REID Lifting - Model: PORTA-GANTRY TC1 - Type: Mobile aluminium gantry crane - Load capacity / WLL: 500 kg - Beam length: 3,920 mm - Adjustable working span: approx. 2,200–3,000 mm - Adjustable lifting point height: approx. 4,019–5,819 mm Bwsdpez Hxyksfx Ahmsu - Maximum overall height: approx. 6,149 mm - Overall width: approx. 2,733 mm - Gantry weight: approx. 233 kg, excluding trolleys and accessories - Aluminium construction - Mobile design with swivel castors - Manual operation – no electrical power supply required Included in the sale: - 2 x REID PORTA-GANTRY A-frames - 1 x 3,920 mm aluminium beam - 3 x gated trolleys, WLL 500 kg - 1 x single sheave carrier - 1 x REID PlusWinch manual winch, WLL 500 kg - 10 m galvanised wire rope - Winch bracket kit The crane is supplied with technical documentation and operating manuals. Due to the very limited period of use, the equipment is in very good condition. Inspection can be arranged by appointment. Location: Ringsted, Denmark. Transport can be arranged by agreement. Please contact us for further information, photos or technical documentation.

Year of construction: 2022, operating hours: 2,000 h, condition: like new (used), functionality: fully functional, We offer this like-new Ulmatec filter unit, model FES 20-35-4, for dry dust extraction of aluminum/plastic, manufactured in 2022. Bwsdpfx Aezlr Dcjhmeu Manufacturer: Ulmatec Model: Filter unit FES 20-35-4 Year of manufacture: 2022 Condition: like new Type: Dry dust extraction for aluminum/plastic Category No.: 376 If you have any questions or require further information, please send us a message or call us.

Condition: used, saw blade diameter 420 mm capacity 90 degrees: round 130 mm Bwodpfxsrub S Ue Ahmsu capacity 90 degrees: flat 160 x 100 mm capacity 45 degrees: round 110 mm capacity 45 degrees: square 130 x 80 mm turning speeds 3000 U/min engine output 2,0 kW total power requirement 2,0 kW weight of the machine ca. 190 Kg dimensions 3,0 x 1,0 x 1,3 m Underfloor aluminum circular saw - Hydropneumatic semi-automatic - pneum. Workpiece clamping device - Roller conveyor with material stop - Machine feet

Condition: used, saw blade diameter 450 mm capacity 90 degrees: round 130 mm capacity 45 degrees: round 100 mm capacity 90 degrees: flat 210 x 170 mm capacity 45 degrees: square 145 x 170 mm turning speeds 2900 U/min total power requirement 2,3 kW weight of the machine ca. 600 Kg dimensions 4,0 x 1,5 x 1,5 m Bwedpfxjyfwxao Ahmju Underfloor aluminum circular saw - Hydropneumatic semi-automatic machine - Pneumatic workpiece clamping device - Roller conveyor with material stop, length 3m - Feed roller conveyor, length 3m Machine color is blue!!

Condition: excellent (used), Year of construction: 2023, operating hours: 450 h, functionality: fully functional, machine/vehicle number: 1589 / 1590, saw blade diameter: 500 mm, Fully automatic sawing and punching machine for aluminium and plastic profiles The Profilma 502 ST-V combines precise sawing and punching in a continuous, automated workflow. Based on the proven Profilma 502 model, this machine is ideally suited for high-volume production, complex processing tasks, and the machining of bundle materials. Control is provided via a Siemens S7 system with touch display, piece counter, cycle time display, and integrated error diagnostics. An IXON router enables secure remote access via VPN. Up to 10 punching dimensions can be programmed per job. Sawing range & feed: - 500–550 mm saw blades - Saw drive: 7.5 kW, S6, 400 V, 50 Hz, 2,850 rpm - Infinitely variable speed adjustment - Saw cut from below, powered feed - Material feed: 3–800 mm, reverse feeding up to 4,000 mm - Ball screw spindle with servo drive and round guide rails - Residual piece: from 75 mm (sawing mode), from 80 mm (punching/sawing mode)* Punching unit: - Vertical hydraulic punch (output side) with automatic oil cooling - Punching force: 300 kN - Stroke: 20 mm - Double stroke cycle time: 2 - 3 seconds - Punch slug ejection into the machine frame - Conveyor belt 250 × 800 mm for parts removal Equipment: - 2 pneumatic clamping cylinders (vertical, pressure-reduced) - 3 chip extraction ports Ø 100 mm, potential-free contact for extraction control system - Minimum quantity spray unit with two 3-litre tanks and fill level display - Noise protection package: enclosure and saw guard internally insulated - Roller conveyor (740 mm) with reach-in protection on the infeed side - Sturdy stationary machine frame, working height: 960 mm - Manually operated safety cover - Saw blade housing located below the table surface Max. cutting range: Bwjdpsyyz Ebofx Ahmsu - Profile height: up to 65 mm - Profile width: up to 170 mm Technical data: - Dimensions (W × D × H): approx. 311 × 153 × 197 cm - 2 machines available ----- Attractive offer – flexible & worry-free We not only provide you with a high-quality product, but also offer customised financing solutions tailored to your needs. Whether down payment, instalment payment, or individual financing models – together, we will find the right option for you. If desired, we can also take care of the entire transport logistics. From planning through to reliable delivery, we ensure a smooth and punctual process so you do not need to worry about anything. 📞 Please feel free to contact us for more information or a non-binding quotation. We will provide you with professional and personal advice. Subject to prior sale, modifications, and errors!

Condition: used, axle configuration: 3 axles, first registration: 01/2000, color: other, Year of construction: 2000, Empty weight: 6.960 kg Bodpfx Ahewu Spgemowu Axle 1: left 10 mm right 10 mm Axle 2: left 10 mm right 10 mm Axle 3: left 8 mm right 8 mm

Condition: good (used), functionality: fully functional, saw blade diameter: 350 mm, Saw motor: 1.5 / 1.8 kW Bwedpfx Ahezzvwromeu Saw blade size: 350 mm 2 saw blade speeds: 1400 / 2800 rpm Miter angle stepless: ±45°

Condition: used, empty load weight: 6,300 kg, overall weight: 33,500 kg, axle configuration: 3 axles, first registration: 06/2001, loading space volume: 53 m³, suspension: air, tire size: 385/65 R22.5, tire condition: 80 %, trailer brake: trailer braked, Year of construction: 2001, Equipment: ABS, SCHWARZMÜLLER – approx. 53 m³ – Full Aluminum - Volume: approx. 53 m³ - Portal doors and grain discharge gates - Aluminum chassis - Aluminum body - ABS - SAF axles - Lift axle - Drum brakes - Air suspension - Roller cover - Standing platform at the front wall - Aluminum rims - Toolbox - Spare wheel holder - Spare wheel - Tire size: 385/65 R22.5 Tire tread: approx. 70-90% - etc. ….. For more information: Mobile phone: +43 664 4477030 Bodpfx Ahoztl Spsmswu ..:: Please contact us before your visit; the office is not always staffed ::.. Would you like to visit us? We offer a free pick-up service from the train station in 4020 Linz. We will handle all customs matters for you. What to do with the used vehicle? ...If we reach an agreement, we will gladly take it in part exchange. This offer is non-binding and subject to change. Errors and prior sale excepted.

Year of construction: 2015, operating hours: 2,000 h, condition: excellent (used), functionality: fully functional, Machine for the production of aluminum roller shutters. Functional length: 400 cm. Bwsdpfx Aozk Tqhjhmou

Condition: excellent (used), Year of construction: 2022, functionality: fully functional, power: 15 kW (20.39 HP), input voltage: 400 V, input frequency: 50 Hz, type of input current: three-phase, pressing force: 175 t, stroke length: 275 mm, operating speed: 12 mm/s, reverse speed: 190 mm/s, table length: 3,100 mm, table height: 900 mm, throat depth: 410 mm, distance table to ram: 550 mm, clearance between the columns: 2,600 mm, oil tank capacity: 300 l, total length: 5,025 mm, total width: 2,150 mm, total height: 2,680 mm, overall weight: 9,086 kg, Equipment: CE marking, documentation/manual, safety light barrier, 2022 Ermaksan Speed-Bend PRO 3100x175 CNC Press Brake 2022 Ermaksan Speed-Bend PRO 3100x175 CNC press brake in very good condition. 175T x 3100mm, 6 axis, Delem DA66TX, CNC crowning, laser guards, generous tooling package included. Machine Manufacturer: Ermaksan Model: Speed Bend Pro 3100 x 175T Machine Type: 6 Axis CNC Pressbrake Capacity: 3100 x 175T Year: 2022 Control: Delem DA66TX Condition: Very Good Description Ermaksan Speed-Bend Pro 6 Axis CNC Hydraulic Press Brake with Delem DA66TX Control. Available now, this 2022 Ermaksan Speed-Bend PRO 3100x175 CNC Press Brake is a high-quality, modern hydraulic press brake in very good condition. This is a 6 axis machine with Y1, Y2, X, R, Z1 and Z2 axes, fitted with a Delem DA66TX CNC control, pneumatic top tool clamping, CNC crowning, laser guards, wanderer type foot pedal, and supplied with generous selection of top and bottom tooling. Ideal for sheet metal fabrication, precision bending, stainless steel work, mild steel fabrication, aluminium bending, agricultural fabrication, general engineering and production workshops. Key Features 2022 Ermaksan Speed-Bend PRO 3100x175 Bwedpsz Dn Huofx Ahmsu 175 tonne bending capacity 3100mm bending length 6 axis CNC press brake Y1, Y2, X, R, Z1 & Z2 axes Delem DA66TX CNC control Pneumatic top tool clamping Package of Top and bottom tooling included CNC / motorised crowning Laser safety guards Wanderer type foot pedal Very good condition Excellent machine for fabrication and production bending work Capacity & Main Machine Data Manufacturer: Ermaksan Model: Speed-Bend PRO 3100x175 Year: 2022 Machine Type: CNC hydraulic press brake Bending Length: 3100mm Bending Force: 175 tonnes Distance Between Columns: 2600mm Axes: Y1, Y2, X, R, Z1, Z2 Crowning: Motorised / CNC crowning Backgauge Finger Blocks: 2 Speeds & Axis Travel Y Rapid Speed: 180mm/s Y Working Speed: 12mm/s Y Return Speed: 190mm/s X Axis Travel: 800mm X Axis Speed: 500mm/s R Axis Travel: 250mm R Axis Speed: 350mm/s Z1 / Z2 Axis Travel Speed: 1000mm/s Stroke, Daylight & Frame Stroke: 275mm Daylight: 550mm Throat Depth: 410mm Table Height: 900mm Table Width: 90mm Power, Size & Weight Oil Capacity: 300 litres Motor Power: 15kW Approx. Length: 5025mm Approx. Height: 2680mm Approx. Width: 2150mm Approx. Weight: 9086kg Delem DA66TX CNC Control Control Features Include 2D graphical touch-screen programming High-resolution colour TFT display Automatic bend sequence calculation Collision detection 3D machine setup with multiple tool stations USB / peripheral interfacing Product and tool memory Profile-TL offline software support User-friendly Delem touch navigation Delem’s DA-66T platform is listed by Delem as a 2D graphical press brake control with automatic bend sequence calculation, collision detection, full 3D machine setup, USB interfacing, 17" high-resolution colour TFT display and Profile-TL offline software support. Included Equipment Pneumatic top tool clamping Lots of Top tooling Lots of Bottom tooling CNC crowning Laser guards Wanderer type foot pedal 6 axis CNC backgauge system Delem DA66TX control Typical Applications Sheet metal fabrication CNC press brake bending Mild steel bending Stainless steel bending Aluminium bending Box and pan type components Architectural metalwork Agricultural fabrication General engineering workshops Production bending work

Condition: new, saw blade diameter: 400 mm, input voltage: 400 V, Equipment: documentation/manual, - Saw blade, Ø 400 mm Bodpez D Niqjfx Ahmowu - Double miter - Compound miter - 4 pneumatic clamping devices - Minimum quantity lubrication system - Compressed air gun - Protective cover - Documentation - 400V

Condition: used, axle configuration: 3 axles, first registration: 10/2007, color: other, Year of construction: 2007, Empty weight: 6.740 kg Axle 1: left 10 mm right 10 mm Axle 2: left 12 mm right 12 mm Bjdpfx Aheyvf Dfemewu Axle 3: left 10mm right 10 mm

Condition: used, saw blade diameter 350 mm capacity 90 degrees: round 120 mm capacity 90 degrees: square 110 mm capacity 90 degrees: flat 200 x 88 mm capacity 45 degrees: round 115 mm Bwodpfezyva Rjx Ahmou capacity 45 degrees: square 110 mm capacity 45 degrees: square 150x80 mm total power requirement 1,5/1,8 kW weight of the machine ca. 0,4 t dimensions 1,2 x 0,9 x 1,5 m Display machine - Never used - 45° left/right miter - Head tilts up to 45° for bevel cuts (compound cuts) - Pneumatic dual quick-clamping system - Includes micro-spray system - Includes carbide saw blades

Condition: excellent (used), Catalog number 8051 TECHNICAL DATA - max. blade diameter 300mm - spindle diameter 30mm - 2 blade guards - pneumatic cutting (blade movement up/down) - sawing units adjustable at a 45° angle - manual adjustment of sawing unit spacing - min. cutting length at 90° 280mm - max. cutting length at 90° 3020mm - cutting height at 90 degrees 90mm - 2 pneumatic clamps - control pedal - material support - main motor 2x2kW - dust extraction nozzle diameter 2x60mm - dimensions (L/W/H) 3520x900x1450mm - weight approx. 500kg Bjdpezrwrfsfx Ahmjwu ADVANTAGES - unpainted - tilting sawing units - DTR documentation Net price: 15900 PLN Net price: 3698 EUR, depending on the exchange rate of 4.30 EUR (Prices are subject to change due to significant fluctuations) - used saw, very good condition

Year of construction: 2019, condition: good (used), Aluminum Telescopic Conveyor Belt, Gawronski – used: Price ex works: only €14,950.00 (net), including loading! Manufacturer: Gawronski GmbH Type: 686001 Year of manufacture: 2019 Model series: Universal conveyor belt for packages with counting mechanism Supply voltage: 380/50 V/Hz Power: 1.8 kW, max. 2.2 kW Working platform height, continuously adjustable from 140 mm to 965 mm Max. load on working platform: max. 1 person, 150 kg Length in transport position: 8,700 mm Weight: 1,160 kg Maximum weight per piece: 50 kg/linear meter Condition: good Available: immediately Bwsdpfx Aez Dtlcjhmeu Location: 57223 Kreuztal

Condition: ready for operation (used), Year of construction: 2014, saw blade diameter 350 x Ø 32.0 mm capacity degrees: flat 175 x 75 mm capacity degrees: square 110 x 110 mm capacity degrees: flat 100 x 80 mm capacity degrees: square 85 x 85 mm turning speeds 3000 U/min total power requirement 1.5 kW weight of the machine ca. 180 kg dimensions of the machine ca. 870 x 710 x 1435 mm Equipment : - semi-automatic circular saw for cutting PVC and aluminum profiles - two-hand safety operation - Miter adjustment : * left * right 0 / / - Large protective hood, covers entire working area - Saw blade - 2x vertical pneumatic clamping cylinders - Adjustable blade and cutting feed - Air dust gun Work sequence 1) Setting the cutting angle 2) Inserting the material 3) Adjusting the stroke speed Bwsdsyu U Dfopfx Ahmsu 4) Bring the clamping cylinder up to 20 mm of material 5) Clamp the material 6) The machine is ready for operation by pressing the start button. 7) Press and hold the two SAW buttons, the material is sawn. 8) At the end of the cycle, release both SAW buttons and press the STOP button 9) Open the vice and remove or push the material forward * Special accessories included : - ALU chip extractor

Condition: excellent (used), Year of construction: 2023, operating hours: 67 h, functionality: fully functional, machine/vehicle number: 1591 / 1592, saw blade diameter: 500 mm, Fully Automatic Sawing and Punching Machine for Aluminum and Plastic Profiles The Profilma 502 ST - HV combines precise sawing and flexible punching in a fully automatic process. Based on the Profilma 502 model, it is specifically optimized for high-volume applications and combined processing operations – including the handling of entire profile layers. Control is provided via a Siemens S7 system with touch display, piece counter, cycle time display, and integrated fault diagnosis. An IXON router allows for secure remote access via VPN. Up to 10 punching dimensions can be programmed per order. The horizontal punching unit can be deactivated if required. Sawing Area & Feed: - 500–550 mm saw blades - Saw drive: 7.5 kW, S6, 400 V, 50 Hz, 2,850 rpm - Infinitely variable speed control - Saw cuts from below, with motorized feed - Material feed: 3–800 mm, reversible up to 4,000 mm - Ball screw spindle with servo drive and round guide shafts - Remnant length: from 75 mm (saw mode), from 80 mm (punch/saw mode)* Punching Unit: - Vertical and horizontal hydraulic punching (on discharge side) with automatic oil cooler - Punching force: 2 × 150 kN - Stroke: ≤ 20 mm - Vertical stroke infinitely adjustable (also suitable for embossing) - Horizontal punching cylinder can be switched off separately - Double stroke cycle time: 2x 2–3 seconds - Punch scrap is discharged sideways from the machine frame - 250 × 800 mm conveyor belt for part discharge Equipment: - 2 pneumatic clamping cylinders (vertical, pressure-reduced) - 3 chip extraction nozzles Ø 100 mm, volt-free contact for extraction control - Minimum quantity lubrication unit with 2x 3-liter tanks and level indicator - Noise protection package: sound-insulated hood and internal saw blade guard - Roller conveyor (740 mm) with reach protection on infeed side - Sturdy stationary frame, working height: 960 mm - Manually opening safety hood - Saw blade housing located under the table Max. Cutting Area: - Profile height: up to 65 mm - Profile width: up to 135 mm Technical Data: Bwsdpfxsyyzxhs Ahmju - Dimensions (W × D × H): approx. 311 × 153 × 197 cm - Total of 2 units available ----- Attractive Offer – Flexible & Worry-Free We not only offer you a high-quality product but also tailored financing options that suit your needs. Whether down payment, installment plans, or individual financing models – together we will find the right solution. If desired, we can also handle the complete transport organization. From planning to reliable delivery, we ensure a smooth and timely process so you don’t have to worry about a thing. 📞 Contact us for more information or a non-binding quote. We provide you with personal and competent advice. Subject to prior sale, changes, and errors!

Condition: used, Year of construction: 2021, functionality: fully functional, intake vacuum (max.): 32 mbar, suction capacity: 3,500 m³/h, actuation type: electric, Dust extraction unit, dust collector, wet separator for aluminum and explosive dusts, manufactured by the renowned brand TEKA. Model: WNA AL 3500 Designed for cleaning dust with special properties, particularly explosive dusts. High-performance wet dust collector, operates on the principle of centrifugal separation. The advantage of this unit is its simple and reliable operating principle. The unit does not have pumps or nozzles that could interfere with its operation. Air is cleaned by swirling the dust with water. Dust particles in the air stream are captured and bound by water molecules. The separated dust settles as sludge in the bottom tank and can be removed from there. The fan is designed for continuous operation and is standard equipment on the unit. Unit parameters: Capacity - 3500 m3/h Bwsdpfx Ahozq A Ezjmsu Vacuum - 3200 Pa Fan with a power of 4 kW Year of manufacture: 2021

Year of construction: 2025, condition: used, M.S.K. / Tryma OMRM 133 Sawing Machine + TM-127 Copying Router (Set of 2 machines, 2025) We offer this complete set of two virtually new machines for processing aluminum and PVC profiles (Year of manufacture: 2025). The machines can be purchased together as a set or individually. 1. M.S.K. / Tryma OMRM 133 (TM-133) Automatic 2-Head Sawing Machine - Asking price for individual sale: €31,500 excl. VAT (New value: €37,420 excl. VAT) - Specifications: Year of manufacture: 2025 | Serial number: 25DCM330004 | Power: 6.5 kW | 400 V (50 Hz) | 1220 kg - Suitable for quickly and accurately sawing PVC and aluminum profiles - Equipped with 2 saw blades, diameter 550 mm - Console with industrial PC and integrated label printer - Automatic opening and closing of the safety guards - Horizontal and vertical pneumatic profile clamping - Fixed left head and automatically adjustable right head with roller conveyor - Servo motor guarantees fast movement and precision via linear guides Bodpfey Encwjx Ahmswu - Pneumatic tilting of heads (90° / 45° inward) + mechanical adjustment for intermediate angles - Sawing length max. 5,000 mm (overlengths up to 7,500 mm possible, min. length 290 mm) - Including central support for support and dust extraction option 2. Tryma TM-127 Manual Copying Router Machine (3 spindles) - Asking price for individual sale: €9,500 excl. VAT (New value: €11,330 excl. VAT) - For quickly and easily routing PVC and aluminum profiles - 3-sided processing without reclamping (1 vertical and 2 horizontal copying heads) - Horizontal and vertical templates with standard operations - Automatic locking of cutting depth via pneumatic clamps - Horizontal and vertical pneumatic pins (4, 6 and 8 mm) - Smooth movement via recirculating ball bearings, shock absorbers and ergonomic handle - Including roller conveyors of 1,500 mm (left and right) and pneumatic cooling spray - Profile height: min. 40 mm / max. 110 mm | Profile width: max. 150 mm If you have any questions, are interested in the complete set or an individual machine, please feel free to send us a message or call us.

Condition: used, Year of construction: 2017, For processing aluminum and PVC profiles: * Miter cuts possible in 3 planes, also usable as a crosscut saw. * Manual adjustment of the horizontal saw blade, allowing it to be positioned up to 20 mm in front of the vertical blade. * Notching options: right-angled, single-sided bevel, double-sided bevel, triple-sided bevel. * Processing of profiles up to 300 mm wide at 90°, sharp miter cuts up to 30°, profile height 280 mm. * Notching depth: horizontal up to 185 mm, vertical up to 210 mm at 90°. * Notching width at 90°: 300 mm. * Max. profile height 280 mm. * Swivel range of the saw blade vertically from 30° - 90° - 30° (front/center/rear) manually, positioning via a mechanical digital display. * Swivel range of the saw blade horizontally with the vertical saw blade 30° - 90° - 30°, manually, positioning via a mechanical digital display. Bwjdozrk Rbepfx Ahmsu * Material stop (tabletop) can be swivelled manually to the left and right from 30° - 90° - 30°, positioning via a scale. * Material depth stop is manually adjustable with a sliding carriage and hand clamp, positioning via a mechanical digital display.

Condition: new, saw blade diameter: 400 mm, – Saw blade 400 mm – Double miter cut – Compound miter cut – 4 manually operated clamping devices – Protective cover – Documentation – 400V Bwedjz Ehy Rjpfx Ahmju

Condition: used, Year of construction: 2004, machine/vehicle number: M275603, functionality: fully functional, travel distance X-axis: 6,200 mm, Emmegi, Twin Electra Sun TU/6 CNC twin head mitre saw. Bedpfxexrg R Re Ahmewu Cutting lenght: 6200mm Blade 500mm

Condition: excellent (used), Year of construction: 2023, operating hours: 499 h, functionality: fully functional, machine/vehicle number: 1587 / 1588, saw blade diameter: 500 mm, This model combines precise cutting to length with integrated punching operations, making it ideal for complex manufacturing processes: Saw unit: Equipped with a saw blade diameter of 500 mm. Drive is provided by a 7.5 kW motor (400 V) with stepless speed control. Punching unit: Features a hydraulic punching unit on the cut-off side with a punching force of 250 kN. The punching direction is vertical from above, with punching tool cassettes that can accommodate up to 8 profiles simultaneously. Material feed: The feed is controlled via a ball screw spindle and a servomotor, with a maximum feed length of 400 mm per individual stroke. Control system: Modern variants often use a Siemens S7 control with touch display for intuitive operation and precise programming. The machine is designed for continuous industrial operation and has the following physical characteristics: Weight: approx. 1,000 kg to 1,500 kg (depending on configuration). Dimensions (saw): approx. 2,100 x 2,000 x 1,600 mm (LxWxH). Hydraulic unit: approx. 900 x 600 x 800 mm. 2 machines in stock. ----- Attractive offer – flexible & worry-free Bwodpfx Asyyz Txehmju We not only offer you a high-quality product, but also tailor-made financing options to suit your needs. Whether down payment, installment plan or individual financing models – together we will find the right solution. Upon request, we will also handle the complete transport logistics. From planning to reliable delivery, we ensure a smooth and punctual process so you don't have to worry about a thing. 📞 Please contact us for more information or a non-binding quote. We provide you with personal and knowledgeable advice. Subject to prior sale, changes and errors excepted!

Condition: excellent (used), functionality: fully functional, Year of construction: 2023, operating hours: 480 h, control type: CNC control, degree of automation: semi-automatic, laser type: fiber laser, laser source manufacturer: MAX Photonics, laser source model: MFMC-6000W_ Pro-BKW1.0, laser hours: 480 h, laser power: 6,000 W, laser wavelength: 1,000 nm, sheet thickness (max.): 20 mm, sheet thickness steel (max.): 20 mm, sheet thickness stainless steel (max.): 20 mm, sheet thickness aluminum (max.): 20 mm, sheet thickness brass (max.): 10 mm, sheet thickness copper (max.): 10 mm, table length: 3,106 mm, table width: 1,582 mm, working length: 3,000 mm, working width: 1,500 mm, working height: 100 mm, travel distance X-axis: 3,000 mm, travel distance Y-axis: 1,500 mm, travel distance Z-axis: 100 mm, feed rate X-axis: 100 m/min, feed rate Y-axis: 100 m/min, workpiece weight (max.): 900 kg, input voltage: 400 V, input current: 33 A, input frequency: 50 Hz, type of input current: three-phase, overall weight: 11,800 kg, total length: 1,560 mm, total width: 5,900 mm, total height: 2,745 mm, Equipment: CE marking, documentation/manual, emergency stop, safety light barrier, 2023 DNE LC3 3015 6kW Fibre Laser Cutting Machine - FAST SALE WANTED Used 2023 DNE LC3 3015 6kW CNC Fibre Laser Cutting Machine for Sale – 3000 x 1500mm – MAX Photonics 6000W Laser Source – Pallet Change Table Machine Manufacturer: DNE Model: LC 3 6000 Machine Type: Fiber Laser Cutting Machine Capacity: 3000 x 1500mm Bwedjz D D N Eepfx Ahmeu Year: 2023 Control: CNC Condition: Excellent Condition Price: Includes Decommissioning & Loading Built as part of the DNE/Bystronic fibre laser range, the LC3 combines high cutting speeds, straightforward operation and relatively low running costs compared with traditional CO2 laser cutting systems. Main Specifications Manufacturer: DNE Model: LC3 3015 Year: 2023 Machine Type: CNC Fibre Laser Cutting Machine Laser Power: 6kW / 6,000W Laser Source: MAX Photonics Fibre Laser Nominal Sheet Size: 3,000 x 1,500mm Approx. Cutting Area: 3,106 x 1,582mm Z-Axis Travel: Approx. 100mm Maximum Sheet Weight: Approx. 900kg Laser Source The machine is fitted with a: MAX Photonics 6kW / 6000W Fibre Laser Source MAX Photonics fibre laser technology is widely used in industrial sheet-metal cutting applications and offers efficient cutting with relatively low maintenance requirements. The 6kW power level provides a good balance between high-speed thin-sheet cutting and the ability to process heavier plate. Approximate Cutting Capacities Depending on material grade, assist gas, nozzle arrangement and cutting parameters, published capacities for the 6kW LC3 include approximately: Mild Steel: Up to 20mm Stainless Steel: Up to 20mm Aluminium: Up to 20mm Brass: Up to 10mm Copper: Up to 10mm Actual production cutting capacity, speed and edge quality will depend on the material specification and cutting parameters being used. Machine Performance Maximum X/Y Positioning Speed: Approx. 100m/min Maximum Simultaneous Positioning Speed: Approx. 140m/min Position Repeatability: Approx. 0.05mm Average Bilateral Position Deviation: Approx. 0.10mm Edge Detection Accuracy: Approx. ±0.5mm These characteristics make the LC3 suitable for both high-speed thin-sheet work and general production fabrication. Shuttle / Pallet Table System The DNE LC3 is designed with a sheet handling arrangement intended to minimise non-cutting time between jobs. Approximate Table Change Time: 24 seconds The rapid table exchange system allows the next sheet to be prepared while the machine is cutting, improving overall machine utilisation. Approximate Machine Dimensions Overall Length: Approx. 10,561mm Overall Width: Approx. 5,903mm Overall Height: Approx. 2,744mm Approximate Machine Weight: 11,800kg Transport dimensions and lifting requirements should be confirmed prior to collection. Please Note All specifications, cutting capacities, dimensions, weights and machine details quoted above are approximate and are provided for guidance only. Actual cutting performance will depend on material grade, assist gas, nozzle configuration, machine condition and cutting parameters. Prospective purchasers should verify all important specifications and operating requirements prior to purchase.

Condition: refurbished (used), Year of construction: 2018, ALUMINIUM PRECISION HIGH-SPEED CUT-TO-LENGTH LINE 1500.3.12, made AUXMET Bedpfx Ahovtpdgomswu Revamped and upgraded 2018 for aluminium. Thickness: 0,4 – 2 mm Coil width: 500 – 1.510 mm Exit sheet length: 500 – 4.000 mm Outer coil diameter: 800 - 1.800 mm Coil weight: 12 Tn N° of straightening rolls: 19 rolls Diameter of leveling rolls: 45 mm