Used Arburg 270 S-250 -60 for sale (84,524)

Condition: ready for operation (used), Year of construction: 2015, clamping force: 1,600 kN, This 6-axis Arburg Allrounder 520 S 1600-290 / 290 was manufactured in 2015. It features a highly wear-resistant thermoplastic cylinder with a 30 mm diameter and a drive unit powered by a 30 kW motor. The machine is equipped with advanced control systems for both injection units and supports multi-component processing. If you are looking to get high-quality injection moulding capabilities, consider the Arburg Allrounder 520 S 1600-290 / 290 hydraulic injection moulding machine we have for sale. Contact us for further details. • Injection units and plasticizing • 1st injection unit: • Complete thermoplastic cylinder, 30 mm, highly wear-resistant • Nozzle contact force controlled, programmable • aXw Control ScrewPilot • 2nd injection unit: • 2nd injection unit 290, vertical • Complete thermoplastic cylinder, 30 mm, highly wear-resistant • Open nozzle 30 mm with nozzle tip; extended nozzle tip +20 mm; radius 15 • Heating band for open nozzle • Nozzle contact force controlled, programmable • aXw Control ScrewPilot • Standard worm gear coupling; coupling geometry: double-sided • Multi-component processing; parting line setup on short runners for 2nd injection unit • Injection closing with mold (“flying injection”) • Drive, hydraulics, and cooling • 65 l/min charging flow rate • Pressure accumulator module, 64 l storage volume (max. 230 bar); accumulator drive • Continuous oil cooling and filtration; increased cooling capacity • Machine cooling circuits controlled • Clamping system, ejector, and core pulls • Clamping plate set; central Ø 125 mm • Minimum installation height 450 mm (extended) • Ejector pressure P/Q controlled (requires T2); ejector cross • Core pulls: • Core pull 1 simultaneous movement (P/Q controlled, programmable) • Core pull 2 simultaneous movement (P/Q controlled, programmable) • Core pull 3 simultaneous movement (P/Q controlled, programmable) • Pneumatic core pull control 4 incl. pressure reducer • Electric core pull control 1 (requires VE 436/00) • Tool pneumatics/hydraulics connections • Electrical connection pneumatic NVD 1 (in tool) • Electrical connection pneumatic NVD 2 (in tool) • Electrical and hydraulic connection NVD 3 (in tool) • Electrical and hydraulic connection NVD 4 (in tool) • Blow-out device 1 with pressure reducer; connection for blow-out device 2 • Cooling water and mold circuits • Shut-off valve for cooling water (inlet); shut-off valve for cooling water (inlet 2) • Cooling water filter 100 µm (inlet) • 3 cooling water circuits to fixed mold plate; 3 cooling water circuits to moving mold plate • Basic equipment for 2nd cooling water distributor (manual) with 7 free cooling circuits • Control and electrics • Selogica direct control; technology level • Fuse protection for heating circuits (1–6 with 16 A) • 15 electrical heating circuits for mold heating • Boost function for heating circuits (hot runner) • Upper guard open, raised to safety clearance • Fault indicator with flashing light • Operator authorization with chip card (EUROMAP 65) • Interfaces and connectivity • Interface for conveyor belt (machine base) • Prepared for six-axis robot with SELOGICA interface • Robot interface (EUROMAP 67), 50-pin • Emergency stop interface (24-pin, 2-channel) • Basic equipment for electric axis control • Host computer interface OPC-UA Lsdpfx Ajyxdwdomtsrp • Temperature control unit interface (20 mA); temperature control cable HB-THERM • Serial printer interface USB; external USB keyboard interface

Condition: good (used), Year of construction: 2000, operating hours: 118,400 h, functionality: fully functional, machine/vehicle number: 182854, clamping force: 2,500 kN, overall weight: 14,000 kg, heating capacity: 23.1 kW (31.41 HP), type of input current: three-phase, For sale is an Arburg 630 S 2500-130 injection moulding machine. The machine is in good condition and ready for immediate operation. Technical data: Year of manufacture: 11/2000 Place of production: Made in Germany Clamping force: 2500 kN Operating hours: 118,400 h Injection unit: 1300 (shot volume/capacity) Total machine weight: 14,000 kg Operating voltage: 400 V (3 ~ AC) Frequency: 50 Hz Heating capacity: 23.1 kW Pump motor: 45.0 kW Total connected load: 68.1 kW Transport and loading can be organised throughout Europe for an additional charge, upon request. Prices are subject to VAT. Inspection possible by appointment. Please contact us—our team will be happy to assist you. Trade-in or exchange possible! Machinery purchase & sale PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES AND MORE. Are you looking for a high-quality yet affordable metalworking machine for your production? Or do you want to sell yours? For more information or contact options, please visit our website. Ljdpeyx Daxjfx Amterp

Condition: good (used), Year of construction: 2008, operating hours: 60,902 h, functionality: fully functional, machine/vehicle number: 206087, clamping force: 400 kN, screw diameter: 22 mm, displacement volume: 34 cm³, For sale is an Arburg injection moulding machine, type 270 U 400-70. The machine is fully functional and ready for immediate operation. Technical data: Year of manufacture: 08 / 2007 Auto operating hours: 60,902 h Serial number: 206087 Operating voltage: 400 V Control voltage: 230 V (~ 50 Hz) / 24 V Rated current: 82 A / 39 A Clamping force: 400 kN Ljdpfoyk Tlasx Amtjrp Tie-bar distance: 270 mm x 270 mm Injection unit: size 70 Screw diameter: 22 mm Control system: Selogica Included accessories: Core pull, pneumatic needle shut-off, Selector chute

Condition: good (used), Year of construction: 2000, operating hours: 83,000 h, clamping force: 350 kN, screw diameter: 25 mm, For sale is an injection molding machine from Märker Arburg, model 320S 350-60. Year of manufacture: 2000 Operating hours (automatic): 83,000 Lodshhuq Aspfx Amterp Screw diameter: 25 mm Clamping force: 350 kN Cylinder length: 60 Upon request, transport can be arranged throughout Europe for an additional fee. Price includes VAT. Machine sales and purchases BUYING / SELLING PRODUCTION AND METALWORKING MACHINES, AMONG OTHERS. Do you need a high-quality but affordable metalworking machine for your production? Or do you want to sell yours? For more information or contact options, please visit our website.

Condition: used, Year of construction: 2005, operating hours: 63,000 h, functionality: fully functional, clamping force: 400 kN, screw diameter: 25 mm, For sale is an injection molding machine of the brand Arburg and the type 270S 400-60 The machine is fully functional and ready for immediate use Technical data Year of construction: 2005 Ljdpfx Aou Hqh Remtorp Operating hours: 63,000 h Cylinder: Ø 25 Clamping force: 400 kN Core pull: 1*Hydraulic Internal pressure transducer On request, transportation and loading can be organized at an extra charge. can be organized throughout Europe. Prices plus VAT Viewing possible by appointment. Contact us, our team will be happy to help you. Trade-in or exchange possible! Machines purchase / sale PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES AND MUCH MORE. Do you need a high-quality but inexpensive metalworking machine for your production? Or do you want to sell yours? For further information or contact options, please visit our website

Condition: used, Year of construction: 2004, operating hours: 55,000 h, functionality: fully functional, clamping force: 350 kN, screw diameter: 18 mm, For sale is an injection molding machine of the brand Arburg and the type 320S 350-60 with original Arburg handling The machine is fully functional and ready for immediate use Technical Data: Year of construction: 2004 Operating hours: 55,000 h Screw Ø 18 mm Clamping force: 350 kN Core pull: 1*Hydraulic Valve gate: Pneumatic Selector switch Handling: Arburg Multilift H-side removal incl. deposit conveyor belt On request, transportation and loading can be organized for an extra charge. can be organized throughout Europe. Prices plus VAT Viewing possible by appointment. Please contact us, our team will be happy to help you. Lrodpfsu Hqinsx Amtep Trade-in or exchange possible! Machines purchase / sale PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES AND MUCH MORE. Do you need a high-quality but inexpensive metalworking machine for your production? Or do you want to sell yours? For further information or contact options, please visit our website

Condition: used, Year of construction: 2005, operating hours: 70,000 h, functionality: fully functional, clamping force: 350 kN, screw diameter: 25 mm, For sale is an injection molding machine of the brand Arburg and the type 320S 350-60 The machine is fully functional and ready for immediate use Technical data Year of manufacture: 2005 Operating hours: 70,000 Screw Ø 25 mm Clamping force: 350 kN Valve gate: Pneumatic Core pull: 1*Hydraulic Internal pressure transducer Selector switch On request, transportation and loading can be organized for an extra charge. can be organized throughout Europe. Prices plus VAT Viewing possible by appointment. Contact us, our team will be happy to help you. Trade-in or exchange possible! Machines purchase / sale PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES AND MUCH MORE. Lredpfx Aju Hqiuemtjp Do you need a high-quality but inexpensive metalworking machine for your production? Or do you want to sell yours? For further information or contact options, please visit our website

Year of construction: 2022, condition: new, functionality: fully functional, The machine is NEW. Price €240,000 gross. Lredpfjwdtd Djx Amtop

Condition: excellent (used), Year of construction: 2008, operating hours: 74,753 h, clamping force: 600 kN, screw diameter: 35 mm, clearance between the columns: 320 mm, displacement volume: 144 cm³, injection pressure: 1,820 bar, injection weight: 132 g, mold height (min.): 200 mm, Arburg 320C-600-250 injection molding machine (241) possibility of working vertically Number: 241 Availability: in stock Year of production: 2008 Screw diameter [mm]: 35 Ljdpjw R Tixofx Amtjrp Injection weight [g]: 132 Injection pressure [bar]: 1820 Closing force [kN]: 600 Column spacing [mm]: 320×320 Plate size [mm]: 446 x 446 Min. mold height [mm]: 200 Control type: Selogica Tongue: german Installed power [kW]: 23.9 Working hours [h]: 74753 Weight [kg]: 2330 Dimensions [mm]: 3500×1500 Feed hopper: NO Robot socket: Yes Core string: 1x

Condition: like new (used), Year of construction: 2018, Clamping force: 25 ton Version: Shuttle table Opening force/stroke min.- max. Lrjdpfx Aeyfg D Sjmtep : 100/225 mm Mould height variable min.- max. : 122-222 mm Shuttle table stroke: 500 mm Wight on shuttle table. max. :120 kg Ejector force/stroke max. : 16/40 kN/mm Screw: 22 mm Effective screw length L/D : 20 Screw stroke max. : 90 mm Stroke volume: 34 cm3 Shot weight: 31 g Injection pressure: 2.000 bar Working hours: 15.571 h

Condition: like new (used), Year of construction: 2020, Clamping force: 25 ton Version: Shuttle table Opening force/stroke min.- max. : 100/225 mm Mould height variable min.- max. : 122-222 mm Shuttle table stroke: 500 mm Wight on shuttle table. max. :120 kg Ejector force/stroke max. : 16/40 kN/mm Screw: 22 mm Effective screw length L/D : 20 Screw stroke max. : 90 mm Stroke volume: 34 cm3 Shot weight: 31 g Injection pressure: 2000 bar Lredpfx Amovl Skastep Working hours: 7397 h

Condition: good (used), Manufacturer: MBT Lodpfehzr U Iox Amtsrp Type: MV-250 S Motor: 5.5 kW Hopper size: 780 x 600 mm Housing size: 3500 x 1000 x 2200 mm

Condition: used, maximum load weight: 22,725 kg, overall weight: 31,000 kg, axle configuration: 2 axles, first registration: 04/2023, next inspection (TÜV): 04/2027, total width: 2,600 mm, total height: 4,000 mm, Year of construction: 2023, SOR 2-AS CHILLED/FREEZER SEMI-TRAILER, GALVANIZED CHASSIS, STEERING AXLE, 270 HIGH, 250 WIDE Body: Chilled/freezer transport Date of first registration: Valid until (MOT): - Make and model: SOR Iberica SOR-S2E, built by Burgers Dimensions (L x W x H): 1350 x 250 x 270 cm (internal) Unladen weight: 8,275 kg Payload: 22,725 kg GVW: 43,000 kg Refrigeration unit: Carrier Vector 1550, diesel and electric Operating hours: 26 hours Tail lift: None Suspension: Air suspension Axle configuration: Number of axles: 2 Lift axle: Yes, axle 1 Steering axle: Yes, axle 2, mechanically steered (Tridec) Axle make: BPW, with disc brakes Tire size: 385-55-22.5 Rear axle 1: Tread depth left: 80%, tread depth right: 80%, Michelin Rear axle 2: Tread depth left: 80%, tread depth right: 80%, Michelin Extras: Fully galvanized chassis, fully insulated cargo box, Carrier Vector 1550 refrigeration unit (diesel and electric), temperature range from -30 to +30 degrees, suitable for transporting flowers, 270 cm internal height, 4 x rails against the ceiling, 1 x horizontal securing rail, 1 x lift axle, mechanically steered 2nd axle (Tridec), Dynamic Ramp Protection, various additional lights. VERY WELL-MAINTAINED CHILLED/FREEZER SEMI-TRAILER WITH STEERING AXLE AND GOOD DIMENSIONS. HAS ONLY DRIVEN 45,000 KM, AND THE REFRIGERATION UNIT HAS ONLY RUN FOR 26 HOURS. IMMEDIATELY AVAILABLE AND READY FOR USE. Further information: * Tire size | First axle: 385/55 R22.5 * Tire tread depth inside left | First axle: 80% * Tire tread depth inside right | First axle: 80% * Maximum axle load | First axle: 9000 kg * Tire size | Second axle: 385/55 R22.5 * Tire tread depth inside left | Second axle: 80% * Tire tread depth inside right | Second axle: 80% Lredpfx Ameziudyjtep * Maximum axle load | Second axle: 9000 kg * Position | First axle: Rear * Lift axle | First axle: Yes * Position | Second axle: Rear Further equipment: * Rear doors * Homepage * Steering axle * Lift axle * SemCollection * SemStars Semtrade B.V. Contact: Martin Klaaijsen | Tel: | Whatsapp: | Email: Export costs: Please inquire in advance about the costs and procedures for your country. Location: Maasdijk (NL) | 140 km from the border | 20 km from Rotterdam The Hague Airport Disclaimer: Subject to changes, prior sale, and errors.

Condition: used, fuel type: electric, Heavy duty castors, heavy duty wheel, tire, wheel, swivel castor, Lrjdjcgqc Espfx Amtjp -Payload: 1,000 kg -directable -Brake -Ball bearings -Tire size: 250 x 60 mm -Mounting plate: 140 x 175 mm -Total height: 305 mm -Number: 6x bikes available -Price: per piece -Weight: 10 kg/piece

Condition: used, fuel type: electric, Heavy duty castors, heavy duty wheels, tires -Payload: 1,000 kg -Ball bearings -Tire size: 250 x 60 mm -Mounting plate: 140 x 175 mm -Total height: 305 mm -Number: 9x wheels available -Price: per piece -Weight: 7 kg/piece Lredpfecgqc Hjx Amtsp

Condition: new, GMN / Schaudt TSE 70c - 25000/8 spindle SN 386347 8 - 8 - 6.5kW S 6-60% 350-350-350V, unused in opened original packaging, 100% functional, scope of delivery as per photos Lredpfx Amjqfub Aotsp

Condition: ready for operation (used), Litronic PR 250-60/1A/Lit1102/PB/V4 pulse controller, serial number as shown in the photo, used, in good condition, 100% functional, scope of delivery as shown in the photos. Lsdoi Eby Iepfx Amtsrp

Condition: new, Heidenhain LS 487 : 572 250-59 linear scale ML 270, serial number: 43630711K with Heidenhain AE LS 487 : 594875-02 reading head SN: 43587982 D / 5.0ML/2.. B 09A 4ZS14~1Vss 2F01.., unused in opened original packaging, 100% fully functional, delivery scope as per photos. Ljdpfx Ajx Er Hajmtsrp

Condition: new, GMN / Schaudt TSE 70c - 25000/8 spindle SN 371461 8 - 8 - 6.5kW S 6-60% 350-350V, unused in opened original packaging, 100% functional, scope of delivery as per photos Lsdpfxoqfubxj Amtorp

Condition: used, maximum load weight: 32,750 kg, overall weight: 42,000 kg, axle configuration: 3 axles, first registration: 05/2026, next inspection (TÜV): 05/2027, Year of construction: 2026, KRONE SDR COOLLINER, 2,500 KG LIFT, 270 HIGH, 250 WIDE, BRAND NEW Body: Reefer First registration: APK: - FRC: Dimensions (L x W x H): 1331 x 250 x 270 cm Tare weight: 9,250 kg Payload: 32,750 kg GVW: 42,000 kg Refrigeration: Carrier Vector 1550, diesel and electric Lift: 2,500 kg Dhollandia tail lift with own batteries Platform length: 200 cm (extra long) Suspension: Air suspension Lift axles: Yes, axle 1 and 3 Axle configuration: Number of axles: 3 Axle manufacturer: SAF Brake system: Wabco Tire size: 385-55-22.5 Rear axle 1: tread depth left outer: 100%, tread depth right outer: 100%, Pirelli Rear axle 2: tread depth left outer: 100%, tread depth right outer: 100%, Pirelli Rear axle 3: tread depth left outer: 100%, tread depth right outer: 100%, Pirelli Extras: Carrier Vector 1550 refrigerator, diesel and electric, temperature range from -30 to +30 degrees, flower width, 270 cm high, 2x horizontal load securing rails, 5x rails in the roof, aluminum floor, 2x lift axles, 2,500 kg tail lift with own batteries, long lift platform (200 cm), dynamic ramp protection, pallet box, 9-ton SAF axles with disc brakes, 15-ton gooseneck, Krone telematics BRAND NEW KRONE TRAILERS WITH 2,500 KG LIFT READY FOR IMMEDIATE DELIVERY Further information: * Tare weight: 9,250 kg * Tire size | First axle: 385/55 R22.5 * Tread depth inner left | First axle: 100% * Tread depth inner right | First axle: 100% * Maximum axle load | First axle: 9,000 kg * Tire size | Second axle: 385/55 R22.5 * Tire size | Third axle: 385/55 R22.5 * Tread depth inner left | Second axle: 100% * Tread depth inner left | Third axle: 100% * Tread depth inner right | Second axle: 100% * Tread depth inner right | Third axle: 100% Ledpfx Ajzbf Tdomtorp * Maximum axle load | Second axle: 9,000 kg * Maximum axle load | Third axle: 9,000 kg * Price on request: Yes * Position | First axle: Rear * Lift axle | First axle: Yes * Position | Second axle: Rear * Position | Third axle: Rear * Lift axle | Third axle: Yes Further equipment: * Rear doors * Website * Tail lift * Lift axle * SemCollection * SemStars Semtrade B.V. Contact: Martin Klaaijsen | Tel: | Whatsapp: | Email: Export costs: We kindly ask you to inform yourself in advance about the costs and procedures for your respective country. Location: Maasdijk (NL) | 140 km from the border | 20 km from Rotterdam The Hague Airport Disclaimer: Subject to changes, intermediate sale and errors.

Condition: used, Year of construction: 1987, used, top condition, low hours Manufacturer Bürkle / Joos HP 60 Completely overhauled by Joos in 1987, safety interlock Model S60/250/130 Year of manufacture 1987 Machine no. 63/310777 1 deck Lsdpfx Amoythdpstorp Plate size: 2500 x 1300 mm Opening height: 290 mm Tip control Safety cable underneath Electric heating Max. specific pressing pressure 2.5 kg/cm² Bonded aluminium plates Piston diameter: 60 mm Bottom piston & piece Space requirement approx. 3000 x 1500 x 1800 mm Weight approx. 3000 kg Location: 97447 Gerolzhofen, loaded free on truck, unpacked Delivery as inspected, in current condition, without warranty or guarantee

Condition: reconditioned (used), Year of construction: 2001, machine/vehicle number: 186931, clamping force: 600 kN, screw diameter: 35 mm, injection pressure: 1,820 bar, injection weight: 132 g, total length: 3,665 mm, total width: 1,485 mm, total height: 1,990 mm, overall weight: 2,330 kg, pressure: 1,820 bar, warranty duration: 6 months, Awaiting refurbishment at our headquarters in Northamptonshire is this Arburg 320C 600-250U injection moulding machine. Any machines awaiting refurbishment (or undergoing refurbishment) with us can be reserved with a 10% deposit and we then prioritise the refurbishment and aim to have the machine available for inspection within 8 weeks from order. Refurbished machines from STV Machinery undergo a comprehensive test procedure during which every function of the machine is tested and if necessary repaired. A production run of at least 5000 fault free cycles prior to sign off ensures trouble free operation once delivered. Machines are ultra clean and cosmetically as good as we can get them. We guarantee our refurbs are delivered fault free and leak free. Lredozk D Dxopfx Amtjp Prices shown are ex-works, but we can quickly provide DAP (Delivered at Place) Incoterm pricing on request. We can take out the hassle and additional costs of purchasing machinery within the UK and EU. Contact us with a potential delivery address and we’ll do the rest.

Condition: excellent (used), Year of construction: 2010, clamping force: 600 kN, Equipment: documentation/manual, Clamping force: 60 t Screw diameter: 20 mm Distance between tie bars V: 370 mm Distance between tie bars H: 370 mm Ljdjzn I H Eepfx Amtorp Type: Horizontal Drive: Hydraulic Engine hours : 60,700 h Hydraulic circuits : 1 x Hot runners : 6 x Robot interface : NO

Condition: good (used), Year of construction: 1994, Arburg Thermonic Temperature controller (model SI FF 10 G250/300) Lodpfezl Sbnjx Amtsrp The device features an analog rotary knob for setting the target temperature in Celsius and Fahrenheit (range 50°C to 450°C), as well as three LED displays for monitoring the temperature deviation.

Condition: excellent (used), Year of construction: 2011, Arburg 520S 1600-290/100 / Production line with Wittmann W823 robot / Operating hours: 20,181 h in automatic mode Year of construction: 09.2011 Injection unit: Screw diameter: 35 mm Injection weight: 132 g Injection pressure: 2000 bar Metering volume: 144 ccm Clamping unit: Clamping force: 160 t Distance between tie bars: 520x520 mm Lredpfx Aszc N Tkemtop Size of the clamping plates: 695x695 mm Ejector: hydraulic Clamping unit: hydraulic Control system: SELOGICA touchscreen Additional equipment: 2K injection molding machine with rotary table and robot Very good technical condition Operating hours: 20,181 h in automatic mode Total number of operating hours: 28,473 h Euromap 67 Robot interface Air valve x 3 Hydraulic, needle core pull, controlled by a proportional valve x 2 Reinforced injection units - bimetal Proportional valves on injection units - precise spraying Machine with two cylinders / batteries with compressed nitrogen (additional charge for fast work) Parallel movements Screw diameter in the vertical spraying unit: ⌀25 mm - 45 g/hp Original turntable Purchase of the turntable for an additional charge Robot Wittmann W823 Year of construction: 2015 5-axis robot: 3 axes are driven by servo motors (electric); axis C and movement A Travel in axes: X-550, Y-1400 (telescopic), Z-3500 Touch control panel The safety package for robots Robot with adapter, protective housing Purchase of the robot for an additional charge Dimensions Weight: 6720 kg Length/width/height: 4.41x1.84x3.20 m All offered machines are started by our service technicians before sale. It is possible to obtain a video of the technical tests of the selected machine or participate in live technical tests at our company in Łódź. Price: On request