Used Arol Used Arol 8 Head Capping Machine - 16000 Bph for sale (106,764)

Condition: used, machine/vehicle number: M348, Used Automatic filling triblock + cap elevatorTechnical Specifications & Performance DataThis Automatic Triblock Rinser-Filler-Capper with Cap Elevator is a compact 3-in-1 monoblock engineered for high-quality glass bottle packaging in industrial environments. Designed around gravity filling, it preserves alcohol content and aromatic profiles for premium spirits and still wines. The triblock integrates a rotary rinser with 9 grippers, a 10-valve gravity filler, and a single-head AROL capping turret, delivering reliable performance within a small footprint—ideal for industrial packaging, beverage production, and integration into a used bottling line or second hand bottling equipment upgrade.Production speed: up to 1,600 bph (at 0.75L)Container type: glass bottlesBottle formats: currently set up for 0.25L; speed reference at 0.75L, 100ML ( Mignon), 187ML (Single-serve size), 1,5L (Low-profile).Bottle diameter range: 55–110 mmBottle height range: 160–320 mmClosure currently: GPI 28/400 (wooden/plastic screw style)Monoblock configuration: 9-gripper single-treatment rinser; 10-valve gravity filler; 1-head AROL capping turretRotation direction: clockwise (left to right)Electrical supply: 380 V, 50 Hz, 3Ph + N + T; auxiliary 24 V DC; IP55Installed power: 7.0 kWPneumatics: 6 bar operating pressure; 200 Nl/min; 1/4" fittingsRinser water pressure: max 3 barProduct connection: DN25 TriclampFilling valve OD: 14 mm; minimum bottle mouth: 18.5 mmConveyor: acetalic (POM) chain, pitch 38.1 mm, width 82.5 mm; support 100x100 mm closed sectionWorking height: 1,000 mm ± 50 mmMachine dimensions (L x W x H): approx. 4000 x 1500 x 2100 mmMachine weight: approx. 3500 kgMaterial construction: AISI 304 stainless steelEquipped with pivoting timing screws, which allow precise centering on the conveyor even for small-diameter bottles (e.g. 100 ml / miniature)Filler: Height adjustment via an adjustable central column (raising and lowering by means of an internal screw). Filling valves can be adapted or replaced according to the required height range.Rinser: Prjdpfx Aozrgqqjnysb Standard height handling up to approximately 150–180 mm. Capability to process shorter formats using grippers with inverted/reversed jaws.Advanced Automation & Control SystemsThe monoblock features a stainless steel electrical cabinet assembled to EN60439-1, CEI17-13/1, and EN60204-1 standards with fully sealed connectors and flame-retardant cabling. Machine speed is finely adjustable via a front-panel potentiometer. The rinser motor is inverter-controlled (400 V) for smooth operation. Level probes govern an electropneumatic product inlet valve with adjustable opening/closing to prevent hydraulic shock. A PLC-read...

Condition: used, Year of construction: 2004, functionality: fully functional, machine/vehicle number: A79N517901, input voltage: 230 V, travel distance X-axis: 450 mm, travel distance Y-axis: 360 mm, overall weight: 720 kg, total length: 3,040 mm, total width: 1,360 mm, total height: 1,750 mm, nominal power (apparent): 1 kVA, rotational speed (max.): 1,000 rpm, rotational speed (min.): 100 rpm, Brother BE-1206B-BC-PC Industrial 6-Head Embroidery Machine Professional 6-Head Commercial Embroidery System for High-Volume Production The Brother BE-1206B-BC-PC is a professional multi-head industrial embroidery machine designed for continuous commercial production of logos, workwear, uniforms, caps, promotional textiles, and fashion garments. Featuring six embroidery heads with twelve needles per head, the machine enables simultaneous embroidery of multiple garments while maintaining excellent productivity and consistent stitch quality. The machine has been used in professional garment manufacturing and is offered as part of the MASI JEANS factory liquidation. Technical Specifications • Manufacturer: Brother Industries, Ltd. • Model: BE-1206B-BC-PC • Machine Type: Multi-Head Industrial Embroidery Machine • Configuration: 6 Embroidery Heads • Needles: 12 Needles per Head • Total Needles: 72 • Maximum Embroidery Speed: Up to 1,000 stitches per minute • Embroidery Area: Approximately 360 × 450 mm per head • Stitch Length: Adjustable • Control System: Digital PC-Controlled Programming Interface • Automatic Thread Change: 12 Colors per Head • Automatic Thread Trimming • Heavy-Duty Industrial Frame • Integrated Production Table Key Features • Six-head simultaneous embroidery system • High-volume commercial production • Automatic 12-color thread change on each head • Automatic thread trimming • Digital pattern programming • Accurate stitch positioning • Suitable for flat garments and various embroidery applications • Heavy-duty industrial construction • Designed for continuous production environments • High productivity with consistent embroidery quality Includes • Brother BE-1206B-BC-PC embroidery machine • Integrated industrial table • Thread stand • Embroidery hoops as shown • Digital control interface • Industrial frame Applications • Corporate logo embroidery • Workwear and uniform production • Promotional textiles • Sportswear • Fashion apparel • Caps, jackets and bags • Contract embroidery production • High-volume embroidery workshops Condition • Used industrial condition • Previously used in professional garment production • 5 embroidery heads fully operational • 1 embroidery head requires repair and is currently not operational • Good overall mechanical condition • Normal cosmetic wear consistent with industrial use • Available for inspection before dismantling Location Valga, Estonia Dismantling & Transport Buyer is responsible for dismantling, loading, transportation, and all related costs. Professional dismantling is recommended due to the size, weight, and precision alignment of the machine. Prodpozib Apefx Anyeb Sales Terms Sold as-is, where-is, without warranty. Part of the MASI JEANS factory liquidation.

Condition: used, Year of construction: 2008, Automatic machine for closing bottles with ROPP metal caps. The machine features smooth speed and output adjustment. Prodpfx Anjzl Ichoysb Manufacturer: Z.M. ROBAK (POLAND) Model: AZR 08 Number of capping heads: 8 pcs Output: 2000 - 12000 bottles per hour (bph) Total power: 2.7 kW Year of manufacture: 2008 Weight: 2000 kg Used machine, in working condition.

Condition: used, Year of construction: 1991, machine/vehicle number: R58, Used isobaric filler Machine Bertolaso 11000 bph year of the remark of isobaric filler 2021 suitable for bottling sparkling and semi-sparkling wines entrance on the left completely overhauled isobaric filler in all its parts with original Bertolaso spare parts (documentable) bottle sizes 85, 88, 90, 112 6 sets of channels with isobaric filler to make the levels Predpfovguv Ujx Anysb the electrical panel of the Used Isobaric Filling Machine according to CE standards use and maintenance manual, spare parts manual available for this isobaric filler the production speed of isobaric filler is 9000 BPH with the sparkling wine the production speed is 7000 BPH with spumante. This isobaric filler is immediately available and delivered in case of purchase. We can assist the buyer in each step of the commissioning and testing operation of the Used Isobaric Filling Machine. How to build one isobaric triblock: The isobaric filler can be connected either to an automatic rinsing machine or to one or more cappers. We have 40 Bertolaso SBR grippers and two series of Bertolaso mushroom and satin cappers. One has 6 heads and reaches 9.000b / h, and one has 10 heads and reaches 14.000 BPH We can introduce all the machines in a sterile clean room with a filtration system. You can have the performance of an isobaric triblock with a Used Isobaric Filling Machine for natural cork and mushroom. Productivity can be from 11,000 to 14,000 BPH. It is possible to foresee a periodic maintenance program for isobaric filler to always have excellent efficiency. This involves both having spare parts in stock and foreseeing machine stops for a week/10 days. In case of purchase of the isobaric filler triblock, at least 9.00 meters by 2.50 meters, H 4.00 meters are required. The creation of a clean room guarantees the absence of contamination in the bottling phase.

Condition: used, Year of construction: 2004, machine/vehicle number: SO137, Used Sidel Combiblock for PET 18000 BPHTechnical Specifications & Performance DataThe Sidel Combiblock is a synchronized blow-fill-cap monoblock engineered for high-efficiency, reliable, and high-quality container production within used bottling lines and industrial packaging environments. Built in 2002, this integrated system combines a rotary PET blow molder, a high-precision gravity filler, and a robust capping turret into a single space-saving frame. The blowing section features 16 cavities for continuous operation and is equipped with an air recovery system to improve energy efficiency. The filling zone includes a pressurized clean cabin with filters, while the capping system handles advanced tethered closure profiles. Please note that molds are not included and a chiller is not supplied with the machine.Manufacturer: Sidel / Arol CombiModel: SBO 16 Series 2 (Blower) + Sidel ALSIM (Filler) + Arol (Capper)Year: 2004Machine type: Synchronized Combiblock (Blow-Fill-Cap)Container material: PET BlowerCavities: 16 (molds not included)Blower Type: RotaryNeck finish set: AlaskaAir Recovery System: IncludedChiller: Not includedFiller Valves: 63 mechanical valvesFilling Type: Gravity fillingRotation Direction: Counter-clockwiseHygienic Enclosure: Pressurized cabin with air filtersCapper Heads: 12 headsCap Distribution System: Pick & Place SupportedCaps: Plastic pre-threaded caps (GRAVITY and HEXALITE TETHERED GME30.28 NCB PT 1.00g - drawing available)Machine Condition: Fully overhauled at the end of 2024Advanced Automation & Control SystemsThis rotary platform supports steady, continuous motion for stable heating, blowing, and filling cycles. The isobaric gravity filling system utilizes 63 mechanical valves to ensure low-turbulence filling, while the integrated pressurized cabin with air filters guarantees a clean environment for sensitive beverage production. Integrated machine controls streamline changeovers and monitoring, while the air recovery system enhances sustainability and lowers compressed air consumption. Quick adjustments for the Alaska neck finish and the specialized Arol pick-and-place cap distribution system reduce downtime across multi-format industrial packaging operations.Production Line Integration CapabilitiesThe Combi system is designed for seamless integration into a complete beverage production line. By combining the Sidel SBO 16 blower, the ALSIM 63-valve gravity filler, and the Arol 12-head capper into a single monoblock, it eliminates intermediate air conveyors, reducing footprint and container scuffing. It pairs effectively with downstream packaging machinery and can operate inline with main conveyors, inspection systems, and labeling equipment. The machine is well suited for PET bottle handling and can be configured for a range of bottle sizes depending on installed molds and process parameters.Machine Condition & Maintenance HistoryThe complete Combi configuration was fully overhauled and refurbished at the end of 2024, supporting reliable, ready-for-operation performance for used bottling line projects. As a second h... Prodezccgdspfx Anyob

Condition: used, Year of construction: 2009, machine/vehicle number: SO128, Used Blow Molding Machine Contiform This used Krones Contiform S14 blow molding machine is engineered for high-output PET bottle production in modern beverage manufacturing. With a maximum speed of up to 25,000 bottles per hour, it is an excellent choice for businesses looking to expand capacity or upgrade a used bottling line with reliable second hand industrial packaging equipment. The machine is equipped with a Siemens PLC and a Krones HMI for robust automation and operator-friendly control. Neck-handling transfer ensures stable bottle handling across formats, while the rotary architecture delivers consistent performance for beverage production. Manufactured by Krones, a global leader in beverage production technology, this model supports PET containers and is suitable for a wide range of products including still and sparkling water, soft drinks, milk, oil, beer, wine, and spirits. The current setup is optimized for 1.5L format and a maximum container height of 320 mm, making it a versatile asset for PET bottle processing in integrated bottling equipment lines. Technical Specifications & Performance Data Manufacturer: Krones Model series: Contiform Model code: S14 Year of manufacture: 2009 Maximum speed: 25,000 bottles/hour Container material: PET Current format: 1.5L Prsdpfjx H Tgdsx Anyjb Maximum container height: 320 mm Worktable height: 1470 mm Type: Rotary Transfer type: Neck-handling Neck finish: Alaska Number of cavities (molds): 14 Number of spindles: 7 Number of grippers (inlet/outlet): 7 Work direction: Counterclockwise Electrical supply: 400 V, 3 PH + N, 50 Hz Rated current: 313 A Advanced Automation & Control Systems The machine features a Siemens PLC for reliable process control and a Krones HMI for intuitive operation, recipe management, and diagnostics. The electrical configuration at 400 V and 50 Hz with 3 PH + N supports stable, industrial-grade performance. Safety guarding and interlocked access points facilitate secure operation during production and changeovers. Neck-handling design contributes to smoother format adjustments and reduced container scuffing. Production Line Integration Capabilities This Krones Contiform S14 can operate as a standalone blow molder or be integrated into a complete beverage production line. It interfaces smoothly with preform handling systems, high- and low-pressure air utilities, and downstream conveyors leading to filling, labeling, and packaging machinery. The rotary platform and neck-handling transfer provide compatibility across typical PET bottle sizes, including 1.5L and other common formats used in water and soft drink applications. Machine Condition & Maintenance History The unit is available in multiple supply options: as-is (seen and liked), refurbished and guaranteed, or ready for operation with compatible spare parts. A 6-month warranty is available when supplied refurbished. These options provide flexibility to match project timelines ...

Condition: used, Year of construction: 2008, machine/vehicle number: SO145, Used PLASTIBLOW PB1H-D blow molding machine - Year 2008Technical Specifications & Performance DataThe Plastiblow PB1H/D is a used industrial blow molding machine designed for producing plastic bottles through extrusion blow molding. Built in 2008, this double-carriage machine is configured with a single extrusion head and is suitable for manufacturing two 1.0L bottles simultaneously. It is a practical solution for manufacturers seeking second hand industrial packaging equipment for bottle production.Manufacturer: PlastiblowModel: PB1H/DYear: 2008Speed: 1L format 600/700 bottles/hour ( 2 cavity mold) Configuration: Double carriage, single headProduction configuration: 2 bottles of 1.0L produced simultaneouslyElectrical supply: 400V, 50HzExtruder configuration marking: E50/26Conformity marking: CEAdvanced Automation & Control SystemsThe machine is equipped for operation on a 400V, 50Hz electrical supply. Its double-carriage arrangement supports alternating mold movements during the blow molding cycle, helping organize bottle production around the molding process. The single-head layout is intended for a two-bottle 1.0L production configuration.For a used bottling line or dedicated plastic packaging installation, the machine should be integrated with suitable electrical protection, process controls and operator-access safeguards appropriate to the final production environment.Production Line Integration CapabilitiesThis Plastiblow blow molding machine can serve as the bottle-production stage of a PET or plastic container packaging system, depending on the material and tooling installed. It can be positioned upstream of downstream bottling equipment such as rinsing, filling, capping, labeling and secondary packaging machinery.The double-carriage configuration is suited to installations requiring a compact bottle manufacturing process before beverage production or other industrial packaging operations. Mold selection, neck finish, bottle geometry and resin compatibility should be matched to the required container specification and the downstream filling line.Machine Condition & Maintenance HistoryThis 2008 Plastiblow PB1H/D blow molding machine is presented as ready for operation. The available identification data confirms the machine model, electrical supply and CE marking. Before commissioning, routine inspection of the extrusion system, molds, cooling circuits, pneumatic equipment, safety devices and electrical components is recommended as part of normal installation and startup procedures for second hand machinery.Operational Performance & VersatilityThe PB1H/D is configured to make two 1.0L bottles at the same time using a single extrusion head and double carriage. This arrangement supports repeatable production of matched bottle formats where a two-cavity mold configuration is required.Blow molding equipment of this type forms hollow plastic containers for use across industrial packaging applications. Final production capability depends on the installed mold set, extrusion tooling, resin, process settings and au... Pjdpez E Dfpsfx Anyerb

Condition: used, The automatic liquid filling machine is plastic (PET) or glass bottles (bottles) for filling with liquid. Podpfxshcxcmo Anyerb 9 charging heads, Siemens PLC control. The previous owner detergent used to charge. Requires electrical installation. Purchase of industrial equipment and machinery. Wide Range of Used Machinery, Industrial Equipment

Condition: used, Set of machines for the production of beverages in 5-liter PET bottles. 1) RIVI 24 carousel filling machine - machine modernized in 2013 - previously used for 1.5 L bottles (24 fillers) - number of filling heads: 12 pcs (for 5 L bottles) - capacity: approx. 1800 bph 5 L 2) ZALKIN 4 PET bottle capper - number of closing heads: 4 pcs - capacity: approx. 2000 bph Used machines, functional at the time of dismantling. Complete original technical documentation. Other offers also include semi-automatic blow molding machines for 5 L PET bottles, compressors and bottle labelers. . Pedpfxeu I N Npj Anyerb

Condition: used, Year of construction: 2017, machine/vehicle number: O3pl, functionality: fully functional, power: 0.75 kW (1.02 HP), input voltage: 230 V, input frequency: 60 Hz, type of input current: AC, rip fence adjustment: manual, actuation type: pneumatic, rotational speed (max.): 12,000 rpm, rotational speed (min.): 12,000 rpm, table width: 330 mm, table length: 2,400 mm, total length: 2,600 mm, total width: 800 mm, total height: 1,800 mm, overall weight: 540 kg, PEMAC 03PL 3-head copy milling machine – Year of manufacture 2017 – Ready for immediate use Very well-maintained PEMAC 03PL copy milling machine for aluminum profiles, manufactured in 2017. The machine has always been used in a commercial setting, has been well-maintained, and is in fully working condition. Inspection and test runs are possible. Specifications Prodszlar Uepfx Anyob Year of manufacture: 2017 230V (1-phase) 3 milling heads Spindle speed: 12,000 rpm Working pressure: 6–7 bar Weight: approx. 540 kg Included 35 used and new milling cutters Video of the machine in operation available Optionally available: Tekna TK280 punching machine (2012) Compressor Asking price: €6,500. Serious offers will be considered.

Condition: used, Year of construction: 2010, machine/vehicle number: SO146, Used SIDEL PET Blow molding machine - Year 2010Technical Specifications & Performance DataThis Sidel PET blow molding machine, model SBO10, is designed for the rotary stretch-blow molding of PET bottles from preforms. Manufactured in 2010, the machine is configured with 10 cavities and has a stated production capacity of 14,000 bph. The Ø28 1881 neck finish is specified for the installed mold and preform configuration.Manufacturer: SidelModel: SBO10Year: 2010Production capacity: 14,000 bphNumber of cavities: 10Preform neck finish: Ø28 1881Blower footprint: 8,900 mm length x 3,200 mm widthInstalled power: 306 kWMain electrical supply: 3 x 400 V, 50/60 HzMaximum current: 452 AAdvanced Automation & Control SystemsThe machine operates from a 3 x 400 V electrical supply and is specified for 50/60 Hz operation. A 24 V remote-control circuit is indicated. Its electrical installation includes a short-circuit rating of 25 kA RMS symmetrical, supporting integration into an appropriately designed industrial electrical system.The rotary PET blow molding process is suited to automated preform handling, bottle formation and discharge to downstream bottling equipment. The supplied preform handling equipment includes an elevator column, mini-hopper assembly and main hopper/feeder.Production Line Integration CapabilitiesThis PET bottle blower can serve as the bottle-forming stage of a used bottling line for beverage production and industrial packaging. It can be integrated with preform supply equipment upstream and with air conveyors, filling monoblocks, labeling machines, shrink wrappers and palletizing systems downstream.The supplied equipment list includes a Sidel EBH 2050 PET preform press manufactured in 2010 and a Sidel-Alsim air conveyor manufactured in 1999. The air conveyor supports transfer of newly formed PET bottles toward subsequent packaging machinery.Preform elevator column: 5,200 mm length x 1,300 mm width x 1,200 mm height; 250 kgMini-hopper assembly: 2,900 mm length x 1,630 mm width x 1,160 mm height; 367 kgMain hopper/feeder: 2,590 mm length x 1,850 mm widthMachine Condition & Maintenance HistoryThe machine is presented as a second hand Sidel PET blow molding machine with identified year, model, output and electrical data. Buyers can use the stated configuration and associated handling equipment details when planning inspection, recommissioning and integration into a PET bottling or industrial packaging production line.Operational Performance & VersatilityThe SBO10 is designed to convert PET preforms into finished PET bottles through a rotary stretch-blow molding process. Its 10-cavity arrangement supports continuous bottle production at the stated output. The specified Ø28 1881 neck finish identifies the available preform and bottle-neck configuration.As part of beverage production equipment, a PET blow molding machine typically supplies e... Pjdpfx Aez E Dfijnyorb

Condition: like new (used), HEMA Automatic Monoblock – Filler + Capper – ZALKIN – Stainless Steel HEMA / ZALKIN automatic filling and capping monoblock, designed to integrate the dispensing of the product and the subsequent placement and closing of caps into a single machine for industrial packaging lines. The unit combines a HEMA filler with a ZALKIN capping system, synchronizing both operations through a compact rotary configuration. The containers are automatically transported between the different stations, reducing transfers and providing a continuous filling and closing process. Its construction, primarily in stainless steel, complete enclosure, and integrated control panel make it particularly suitable for professional applications in the food and beverage industries. Prsdsynkdzspfx Anyjb MAIN FEATURES -Filler manufacturer: HEMA -Capper manufacturer: ZALKIN -Type: Automatic monoblock filler + capper -Integrated operations: filling and closing -Industrial rotary configuration -Automatic container feed -Synchronized positioning and transfer -Multiple filling stations/heads -Automatic product dispensing -Automatic cap feed system -Rotary ZALKIN capper -Multiple closing heads -Automatic infeed and outfeed -Control panel with HMI -Construction primarily in stainless steel -Complete enclosure with transparent safety doors -Hygienic design for the food industry -Prepared for continuous industrial operation -Integrable into complete packaging lines PROCESS The containers automatically enter the monoblock and are positioned in the HEMA filling section, where the different stations perform the product dispensing. Once filled, the containers are synchronously transferred to the ZALKIN capper. The caps, previously fed and oriented, are placed on the containers and then closed by the corresponding heads. The finished containers exit continuously to the next stage of the line. It can be integrated with: -Container depalletizers -Rinsers/washers -Product feeding systems -Cap feeders and orienters -Conveyors -Weight checkers -Inspection systems -Labelers -Coders -Cartoners -Palletizers APPLICATIONS Particularly suitable for food industries, manufacturers of sauces and condiments, preserves, beverages, and other liquid or semi-liquid products that need to automate filling and closing simultaneously. Compatibility with products, filling volumes, container formats, and cap types will depend on the configuration and tooling currently installed. The combination of HEMA filling technology and ZALKIN capping in a single monoblock provides a compact and automated solution for industrial packaging lines. Machine available for inspection. Additional technical information, formats, capacities, dimensions, additional photographs, or videos can be provided upon request.

Condition: used, Year of construction: 2009, machine/vehicle number: SO144, Technical Specifications & Performance DataThe SIPA SFR 8 is a rotary PET stretch blow molding machine designed to form PET bottles from preforms for beverage production and industrial packaging applications. Manufactured in 2009, this machine provides a stated production capacity of 12,400 bottles per hour. Its rotary architecture supports continuous bottle production and is suitable for integration into a used bottling line where consistent container supply is required ahead of filling, capping, labeling and secondary packaging equipment.Manufacturer: SIPAModel: SFR 8Year of manufacture: 2009Production capacity: 12,400 bottles per hourBlow mold configuration: 4 mold sets with 8 cavities eachPreform neck finish: 28mm / 1881 short neckSupported bottle formats: 0.5L, 0.75L and 1.5LContainer material: PETAdvanced Automation & Control SystemsThis rotary stretch blow molder is intended for automated PET bottle manufacturing, transforming heated preforms into finished containers through the stretch-blow molding cycle. The supplied preform feeding system supports controlled preform handling into the machine. Rotary blow molding equipment is typically operated through coordinated process controls that synchronize preform transfer, heating, stretching and blowing stages.The machine is supplied with its preform feeding system and chiller. These components support a more complete blowing package by providing preform infeed capability and process cooling. The high-pressure compressor is excluded, so compressed-air infrastructure must be planned as part of installation and commissioning.Production Line Integration CapabilitiesThe SIPA SFR 8 can operate as the bottle production stage of a PET used bottling line. It is positioned upstream of filling monoblocks, labeling machines, shrink wrappers, handle applicators and palletizing systems, producing PET containers for onward handling in a beverage production line. The available mold sets provide flexibility for 0.5L, 0.75L and 1.5L bottle formats, subject to the installed mold and associated line setup.The supplied preform feeding system supports integration with preform handling equipment. A preform hopper is not included, allowing the buyer to configure a hopper solution according to site layout, autonomy requirements and preform logistics. The 28mm / 1881 short-neck finish should be matched with compatible preforms, closures and downstream filling equipment.Machine Condition & Maintenance HistoryThe machine is described as being in very good condition and regularly maintained by the manufacturer. It remains operational until September 30, 2026, indicating that it is currently in production rather than stored or decommissioned. This operating status gives prospective buyers the opportunity to evaluate the machine as part of an active production environment before dismantling.Planned dismantling and loading will follow the end of operation. Buyers should arrange site assessment, technical verification and transport planning in coordination with the removal schedule.Operational Performance & VersatilityDesigned specifically for PET bottle manufacture, the S... Psdpfjztwmfox Anysrb

Condition: good (used), functionality: fully functional, For sale is a cylinder head resurfacing machine/cylinder block milling machine in good condition. This machine has never been used for grinding, only for milling. The machine can be inspected at any time. An invoice with 19% VAT shown separately will be issued. Predpfx Aney Spmdjysb

Condition: used, Year of construction: 2006, machine/vehicle number: ET236, Used SACMI OPERA labeller machine 200 RFTechnical Specifications & Performance DataThis rotary labeling machine is engineered for high-speed wrap-around labeling with hot-melt technology. Manufactured by Sacmi, the Opera 200 RF delivers robust performance for beverage production and industrial packaging applications, supporting second hand and used bottling line upgrades with reliable throughput.Model: Opera 200 RFMachine type: Rotary Labeling MachineProduction speed (max): up to 30,000 containers/hourCurrent bottle format: 1.0LContainer material: PETLabel type: OPP (oriented polypropylene), roll-fedApplication method: Hot glueReels: 2 with automatic reel changeMaximum reel diameter: 350 mmNumber of label magazines: 2Plate rotation: Cam-drivenWorktable height: 1200 mmElectrical supply: 400 V, 3 Ph + TInstalled power: 25 kWYear of manufacture: 2006Advanced Automation & Control SystemsEquipped with a Pro Face HMI, the Sacmi Opera 200 RF provides intuitive operator control, recipe management, and production monitoring. Mechanical cam-driven bottle plates ensure precise and repeatable label application at high speed. Automatic reel change allows uninterrupted operation during reel depletion, reducing downtime and maintaining production efficiency on a used bottling line.Pro Face operator interface (HMI) for clear diagnostics and settingsMechanical cam control for accurate bottle rotation and label alignmentAutomatic roll changeover to sustain continuous labelingClockwise carousel rotation for standard line layoutsIntegrated safeguards and interlocks for operator protectionProduction Line Integration CapabilitiesThis machine integrates seamlessly into beverage production environments as a standalone unit or inline with rinsing, filling, and capping machines. Designed for PET bottle handling, it interfaces with upstream and downstream conveyors and can be adapted to additional bottle sizes with appropriate format parts.Inline or standalone operation within packaging machinery layoutsDesigned for PET bottle handling in industrial packaging linesCurrent format 1.0L; adaptable to other formats via change partsOptimized for wrap-around OPP labels with hot-melt applicationMachine Condition & Maintenance HistoryThe unit is second hand, overhauled, and guaranteed. It is ready for operation with compatible spare parts available, providing confidence for rapid deployment into production.Ready for immediate useOverhauled and guaranteedWarranty: 6 monthsSupplied with compatible spare partsOperational Performance & VersatilityThe Sacmi Opera 200 RF is built for consistent, high-quality wrap-around label applica... Pjdpfx Anjz E Dlieyjrb

Condition: excellent (used), Twist-Off Automatic Capping Machine EMERITO 2.8 – Jar Sealer The EMERITO 2.8 automatic Twist-Off capping machine is designed for the automatic placement and sealing of Twist-Off metal caps onto glass jars in industrial food packaging lines. Manufactured by EMERITO, the machine automates the process of feeding, positioning, and sealing the caps, providing a uniform and continuous seal for the containers before subsequent processing, labeling, or packaging stages. Its construction, primarily in stainless steel, integrated conveyor, and automatic sealing system make it particularly suitable for canning and professional jar packaging lines. MAIN FEATURES -Manufacturer: EMERITO -Model: 2.8 -Type: Automatic Twist-Off capping/sealing machine -Application: jars and glass containers -Sealing with Twist-Off metal caps -Automatic container feeding -Automatic cap positioning and sealing -Integrated container conveyor -Continuous industrial operation -Motorized sealing system -Construction primarily in stainless steel -Integrated control panel Prjdszw Hngepfx Anysb -Adjustments for adaptation to the installed format -Hygienic design for the food industry -Integrable into automatic filling and packaging lines APPLICATION The EMERITO 2.8 is designed to automate the sealing of jars using Twist-Off caps. The pre-filled containers are transported to the sealing area, where the cap is positioned on the jar and subsequently adjusted using the capping system. Once sealed, the containers automatically continue to the next stage of production. It can be integrated with: Filling and dispensing machines Cap feeders Jar conveyors Inspection systems Container washers and dryers Pasteurizers Autoclaves Labeling and coding machines Case packers and end-of-line equipment APPLICATIONS Especially suitable for canning industries, manufacturers of sauces, jams, pickles, vegetables, prepared dishes, and other foods packaged in glass jars. The EMERITO 2.8 provides an automatic solution for lines that require continuous, uniform, and reliable Twist-Off sealing, and can be integrated into both existing facilities and complete packaging lines. Machine available for inspection. Additional technical information, dimensions, additional photographs, or videos can be provided upon request.

Condition: used, Year of construction: 2009, machine/vehicle number: CA82, Used ROBINO & GALANDRINO capsuling machine - Year 2009Technical Specifications & Performance DataThis automatic capsuling monoblock is engineered for precision capsule application on bottles within a professional bottling environment. Manufactured by Robino & Galandrino, the SUPERBLOC series is renowned for robust construction, reliable operation, and high-quality finishes on glass bottles used in beverage production. The model identified is SUPERBLOC M 4 T, built in 2009 and CE marked for compliance with European safety and machinery directives. This second hand machine is suitable for integration in a used bottling line, supporting industrial packaging requirements for beverage producers.Manufacturer: Robino & GalandrinoModel designation: SUPERBLOC M 4 TYear of manufacture: 2009Machine type: Automatic capsuling monoblock (rotary platform)Container compatibility: Glass bottles (cylindrical and common wine-style profiles)Marking: CEApplication: Industrial beverage packaging and bottlingAdvanced Automation & Control SystemsDesigned for consistent capsule application with minimal operator intervention, this monoblock typically features synchronized drives and an integrated control panel for recipe management and format changes. Safety interlocks and guarding protect operators, while emergency stop circuits meet CE standards. The automation concept supports precise capsule positioning and repeatable performance across production runs.Integrated control panel with machine diagnosticsAutomatic magazine feed and capsule distribution (depending on configuration)Quick adjustment for bottle height and capsule lengthCE-compliant safety circuits and guardsProduction Line Integration CapabilitiesThe SUPERBLOC M 4 T is designed to operate inline with upstream and downstream bottling equipment. It couples efficiently with fillers, corkers, wirehooders, and labelers via standard conveyors. Format changeovers accommodate common glass bottle sizes used in beverage production, enabling flexible operation within mixed-format lines.Inline or standalone operation with synchronized conveyorsCompatible with upstream corking/capping and downstream labelingFormat change components for multiple bottle diameters and heightsMachine Condition & Maintenance HistoryManufactured in 2009 and CE marked, this second hand capsuling monoblock reflects the durable engineering of Robino & Galandrino equipment. The SUPERBLOC platform is known for accessible maintenance points, rugged mechanical assemblies, and availability of wear parts, supporting long-term reliability in beverage production environments.Operational Performance & VersatilityThis capsuling monoblock is suitable for a variety of capsule materials commonly used in beverage packaging. Depending on the installed heads and accessories, it can process PVC shrink capsules, polylaminate aluminum capsules, and specialized capsules for sparkling programs. The rotary layout ensures consistent application and alignment, del... Prodpfoz E Di Ijx Anysb

Condition: used, Year of construction: 2006, operating hours: 67,130 h, machine/vehicle number: R77, Used Filling Machine A3 Flex 100V 1000 Edge 7000 bph Upgrade in 2024, excellent condition and warranty on the replaced spare part Overview of the Used Filling Machine A3 Flex The Used Filling Machine A3 Flex 100V 1000 Edge 7000 bph delivers advanced aseptic filling performance for dairy-based beverages and fruit juices. Originally, Tetra Pak manufactured this A3 FLEX 100V model in 2006. However, in 2024, the company upgraded it to the 100V version. As a result, the machine now complies with modern standards for process control, performance, and operational safety. Therefore, it remains a highly relevant and reliable option for current production needs. Packaging Format and Technical Configuration The Used Filling Machine A3 Flex supports the 1000 ml Edge format, a version of the Tetra Brik package that features an inclined top edge. Consequently, the design improves ergonomic handling and simplifies the application of screw caps. Furthermore, the system uses a single filling valve, which aligns with the standard architecture of A3 Flex machines. These machines perform the filling process vertically under aseptic conditions. In addition, the setup preserves a sterile environment throughout all stages: forming, filling, and sealing. Output Capacity and Operational Hours The Used Filling Machine A3 Flex 100V 1000 Edge 7000 bph delivers a nominal output of 7000 packs per hour. Hence, it ranks among mid-to-high performance solutions in the aseptic filling sector for non-carbonated beverages. Over time, the machine has logged 67,130 working hours, which technicians can use as a key metric for technical assessment. Despite the machine’s age, its solid maintenance history and the 2024 upgrade ensure that it can continue operating effectively in demanding production environments. Prodpfowbhdaex Anyeb Product Applications and Hygienic Design The Used Filling Machine A3 Flex handles dairy and juice products with ease. Moreover, it meets all aseptic packaging requirements, including sterilization and hermetic sealing. The manufacturer built the internal circuits and filling chamber with stainless steel. As a result, the design enables efficient sanitation and ensures compatibility with clean-in-place (CIP) procedures. Additionally, the hygienic design aligns with current food safety standards for the beverage industry, thus making it suitable for sensitive applications. Integration and Control System of the Used Filling Machine A3 Flex The Used Filling Machine A3 Flex offers a compact footprint and a modular structure. Therefore, technicians can integrate it seamlessly into existing bottling lines. Alongside its structure, the machine includes a centralized HMI control panel. Operators use this interface to manage daily activities. Not only does it simplify the workflow, but it also allows for quick adjustments to production parameters or packaging formats. Conse...

Condition: used, Year of construction: 2002, machine/vehicle number: LV46, Used R. BARDI nilo 2-20R bottle washer 20000 BPHTechnical Specifications & Performance DataThe R. Bardi Nilo 2-20R is a linear bottle washer designed for returnable glass bottle handling in bottling and industrial packaging operations. Manufactured in 2002, this machine is engineered to support high-throughput washing processes within a used bottling line, combining bottle cleaning performance with format flexibility.Manufacturer: R. BardiModel: Nilo 2-20RYear of manufacture: 2002Maximum output: up to 20,000 bottles/hourConfiguration: LinearOperating pressure: 6 barCompatible formats: 0.25L, 0.33L, 0.5L and 0.75L bottles, plus other formatsContainer material: GlassAdvanced Automation & Control SystemsThis bottle washing machine is intended for continuous industrial operation, with a linear layout that supports controlled bottle transport through the washing process. Its design is suitable for integration into automated beverage production environments where reliable handling of returnable bottles is required. The stated 6 bar operating pressure should be considered when assessing the compressed-air infrastructure of the installation.Format-specific adjustments are important for maintaining stable bottle movement and effective cleaning performance. Before commissioning, operators should verify the compatibility of guides, carriers, infeed and discharge interfaces with the glass bottle formats to be processed.Production Line Integration CapabilitiesThe Nilo 2-20R is suited to the washing stage of a returnable glass bottle production line. In a typical used bottling line, it is positioned after bottle unloading, decrating and decapping operations, and before empty-bottle inspection, filling, capping, labeling and secondary packaging.The machine processes returnable glass bottles with paper labels, paper and aluminum labels, as well as unlabeled bottles. This capability makes it relevant for industrial packaging lines handling recovered containers that require preparation before refilling. The supported 0.25L, 0.33L, 0.5L and 0.75L formats provide flexibility for beverage production applications using multiple bottle sizes.Machine Condition & Maintenance HistoryThe machine is currently in operation and can be inspected while running in production until April 2027. Its operating condition can be verified directly before purchase. The stated commercial condition is as inspected and accepted, and a 6-month warranty is included.For a second hand bottle washer, an on-site operational inspection provides an opportunity to assess bottle flow, washing-cycle performance, format handling and integration requirements against the intended production line configuration.Operational Performance & VersatilityDesigned for returnable glass bottle applications, this R. Bardi bottle washer supports the preparation of labeled and unlabeled containers for reuse. Washing equipment of this type is a central element in returnable bottling operations, helping remove labels and prepare bottles for downstream inspection and filling.The linear machine arr... Predpoz E Dgyjfx Anyjb

Condition: used, Year of construction: 2009, operating hours: 5,000 h, machine/vehicle number: LC631, Used revised Tetra Pak TBA19 330 Prisma line 9000 bph - 2008Technical Specifications & Performance DataThis used bottling line is a revised Tetra Pak A3 Flex V300 configuration designed specifically for 0.33 L Tetra Prisma cartons, ideal for second hand industrial packaging and beverage production environments. Engineered for aseptic operation, it supports reliable high-speed packaging for dairy and juice applications with consistent quality and uptime.Manufacturer: Tetra PakMain filler: TBA 19, Version 300VProduction speed: Up to approx. 9,000 packs/hourFormat compatibility: 0.33 L Prisma (330 ml)Container type: Carton (Tetra Brik/Tetra Prisma)Filler year: 2008Capper: CAP 30 for Dream Cap (YOM 2019)Packer: TCBP 32 cardboard packer (YOM 2012)Ancillary equipment: Conveyor line, line controller, Domino printer, paper trolleyAseptic packaging: Yes (for long shelf-life products)Reported hours: Filler approx. 5.000 h; Packer approx. 30,000 h; Capper approx. 25,000 hAdditional component: Bonino mechanical feeder (2014) — 460 V, 0.70 A, 60 Hz, approx. 0.8 kWAdvanced Automation & Control SystemsThe line features integrated automation for synchronized operation across filling, capping, packing, and conveying. The line controller coordinates start/stop, speed matching, and fault handling, while the Domino printer integrates for inline coding without impacting throughput. Safety interlocks and guarding protect operators and maintain hygienic integrity during beverage production.Centralized line controller with coordinated speed controlPrinter integration for date, lot, and traceability codingOperator safety protections and interlocked guardsFormat-dedicated setup for 0.33 L Prisma to ensure fast, repeatable changeoversProduction Line Integration CapabilitiesDesigned as a complete packaging line, it integrates seamlessly from aseptic filling to secondary packaging. Conveyors are configured to maintain gentle carton handling and stable flow to the packer. The platform is optimized for dairy and juice, supporting consistent sealing, Dream Cap application, and case packing for distribution.Inline operation across filler, capper, printer, conveyors, and packerCarton handling tailored to 0.33 L Prisma geometrySuitable for milk and juice production workflowsDownstream-ready case packs from the TCBP 32Machine Condition & Maintenance HistoryThe line was previously used for milk and juice and is reported in post-maintenance condition. Operating hours indicate regular industrial use typical of second hand bottling equipment. The published figures support informed planning for preventive maintenance and remaining useful life.Status: After maintenance, ready for operationFiller hours: approx. 24,800Packer hours: approx. 30,000Capper hours: approx. 25,000 Pjdpfsz E Dkxsx Anysrb

Condition: like new (used), VMK Automatic Heading Machine for Pelagic Fish VMK industrial heading machine for pelagic fish, designed to automate the cutting and removal of fish heads within industrial processing lines for seafood products. The equipment allows for the continuous performance of feeding, positioning, and heading operations, reducing manual handling and facilitating a uniform flow towards subsequent processing stages. Its industrial construction, primarily in stainless steel, is specifically designed for operation in humid and demanding environments typical of fish processing plants. MAIN FEATURES -Manufacturer: VMK -Type: Automatic fish heading machine -Application: Pelagic fish -Function: Cutting and removal of the head -Controlled feeding and positioning of the fish -Automatic and continuous processing -Integrated transport system -Multiple feeding channels -Construction primarily in stainless steel -Hygienic design for the food industry -Robust construction for industrial use -Accessibility for cleaning and maintenance -Integrable into existing fish processing lines -Suitable for continuous operation in seafood processing plants APPLICATION The VMK heading machine is designed to be integrated into the preparation area of an industrial processing line for pelagic fish. The fish is fed and guided in a controlled manner towards the cutting area, where the heading operation is performed automatically. Subsequently, the product can continue to the next preparation or processing stages. It can be integrated with: Fish feeding systems Conveyors Sorting and grading machines Cutting and evisceration equipment Filleting machines Fish washers Inspection tables and belts Freezing systems Packaging equipment Complete fish processing lines APPLICATIONS Particularly suitable for canning industries, fish processing plants, and companies specializing in seafood products that need to automate the preparation of pelagic species. It can be used as part of lines designed for the processing of sardines, mackerel, and other species of pelagic fish, depending on the format, product dimensions, and installed configuration. Machine available for inspection. Psdpfxjyuffys Anysrb Additional technical information, dimensions, additional photographs, or videos can be provided upon request.

Condition: used, Year of construction: 2001, machine/vehicle number: LC651, Used KRONES filling line for Vodka - glass 6000 BPH - Year 2001Technical Specifications & Performance DataThis complete glass bottling line, engineered around Krones equipment, is optimized for still strong spirits in non-returnable glass bottles. Configured with a dedicated rinser, a vacuum filling monoblock, a dual-carousel cold-glue labeling and tax-stamp system, and tray-plus-film secondary packaging, it delivers consistent performance for premium spirits presentation.Year: 2001Nominal speed: 6,000 bph on 0.7L formatContainers: Non-returnable Glass bottles; shapes handled: round, flask, shtoffFormats supported: 0.2L, 0.25L, 0.37L, 0.375L, 0.5L, 0.7L, 0.75LRinser: Krones Varioject 1440-24-188; rotary, 24 nozzles; single-channel; fixed nozzles; pre-treated water; gravity draining; no air blowFiller-Capper: Krones Vacufill 960-024-124-V; vacuum filling for still spirits; 24 filling valves; capper with 4 headsClosures: ROPP aluminum and Guala non-refillableLabeler: Krones Prontomatic / Taxomat 720-9-3-180 TA; cold glue; pre-cut paper labels; U-shape tax stamp 160 x 20 mmPacker: MEYPACK VP410; tray + filmConveyors: Krones Synco S bottle conveyors; Krones pack conveyorsControls: Siemens S7 PLC; electrical cabinets includedAdvanced Automation & Control SystemsThe line integrates centralized automation using a Siemens S7 PLC for reliable sequencing of rinsing, vacuum filling, labeling, and packaging. Electrical cabinets are included, supporting line interlocks, safety circuits, and device control. The rotary platforms and mechanical cam systems in the labeling/tax-stamping station ensure repeatable precision at rated speeds, while format-specific change parts support quick, accurate format transitions.PLC/HMI: Siemens S7 PLCControl architecture: Centralized line control with machine-to-machine interlocksSafety: Emergency-stop circuits and guarding typical of Krones rotary equipmentChangeover: Format parts for multiple glass shapes and volumesProduction Line Integration CapabilitiesDesigned for cohesive in-line operation, this used bottling line connects rinsing, vacuum filling, cold-glue labeling with tax stamping, and tray-plus-film packaging via Krones conveyor systems. It is ideal for second hand industrial packaging upgrades in beverage production focused on spirits in glass bottles. The broad format coverage supports brand portfolios requiring flask and shtoff bottles across multiple sizes.Machine typeManufacturer / ModelYearVarious EquipmentKrones Synco S (Conveyors) Prodpfx Ansz E Di Usysb

Condition: like new (used), Year of construction: 2011, machine/vehicle number: MA10110002, functionality: fully functional, SPECIFICATION Drilling capacity in mild steel 18mm Motor 0.45kW 415 volt Spindle 2MT Drive Belt, stepped pulleys Spindle speeds rpm 50Hz 400-700-1200-2100-3600 Spindle travel 75mm Throat depth 185mm Column diameter 70mm Table -working surface 250 x 164mm Table – slots width & centres 13 x 125mm Base – overall 240 x 360mm Max. distance chuck to table 330mm Overall height 865mm Overall width 280mm Overall depth 600mm Pjdpjzmuntefx Anyerb Approx. Nett weight 77Kg Machine equipped with Chuck guard Table adjustment by rack Drill chuck

Condition: excellent (used), Year of construction: 2020, Cardboard box sealing machine Manufacturer: Modumaq Type: TC1-2019 Two-head cardboard box sealing machine Pjdozxgqkopfx Anyerb 0203 Gripper unit – exploded view 0204 Gripper unit – assembled state 0205 Sliding unit and guide rails 0206 Sliding unit for the cardboard magazine 0207 Cardboard fixing cylinder 0208 Lifting cylinder for the glue guns 0209 Sealing cylinder 0210 Methacrylate elements The system was used for a total of 2.5 years.

Condition: used, Year of construction: 2007, operating hours: 14,700 h, machine/vehicle number: ET194, Labeling machine for sale with optical centering 6000 bphTechnical Specifications & Performance DataThis P.E. Labellers rotary adhesive labeler with optical centering is engineered for precision bottle decoration within a used bottling line or new installations. Built for consistent, high-quality labeling across beverage production environments, it balances speed with accuracy and repeatability.Manufacturer / Model: P.E. Labellers – 8T 4S 4E adhesive SL GlueYear of manufacture: 2007Production speed: up to 6,500 bottles per hour (bph)Stations / Plates: 4 adhesive stations; 8 motorized plates with dedicated photocellsOptical centering: Advanced system for precise label alignment on decorated, embossed, or irregular bottlesLabeling applications: Body, back, neck and optional L-/U-seal for caps (via dedicated adhesive unit on trolley)Container types: PET and glass bottles; adaptable for other rigid containers (e.g., aluminum) with appropriate format partsProducts: Suitable for water, juice, beer, wine, spirits, soft drinks, and moreDimensions (WxLxH): 2000 x 2900 x 2500 mmWeight: 2100 kgElectrical requirements: 380 V, 50 Hz, 5 kWConfiguration codes (OEM): No. of plates: 8; Rotation direction: 1; Plate movement: 2; Number of stations: 4; Labeling method: 0,4; Label placement: 0,1,2,4; Optical centering system: 2; Head adjustment: 1Advanced Automation & Control SystemsAutomation is designed for reliable, repeatable labeling within industrial packaging lines. A touchscreen HMI and integrated PLC control all machine functions, offering recipe-based changeovers and real-time diagnostics. Servo-driven or motorized plates work in concert with photocells for synchronous optical centering, supporting premium presentation at full speed.Touchscreen HMI with programmable recipes (memory for multiple label formats)Integrated PLC and modern electronics; inverter-driven speed modulationElectric lift for quick height adjustment of the carousel and heads4-axis head adjustment on trolley for precise head positioningPhotocell-controlled label application synchronized with optical centeringManuals available for operation, maintenance, and programmingProduction Line Integration CapabilitiesEngineered to integrate seamlessly upstream and downstream with rinsing, filling, and capping machines, as well as inspection systems, coders/inkjets, and secondary packaging (shrink, wrap-around, or case packing). This second hand labeler is ideal for upgrading or completing a used bottling line without compromising performance.Compatible with standard conveyors, accumulation tables, and line controlsFast format changes supported by stored recipes and mechanical referencesMulti-format flexibility for different bottle heights and diameters with the right format setsInterfaces available for line start/stop and speed cascade with fillin... Prodpfsvlnvrjx Anyob