Used Auerbach Ax5 Tlf for sale (210)

Condition: used, mileage: 26,397 km, power: 167 kW (227.06 HP), first registration: 06/1994, overall weight: 13,000 kg, fuel type: diesel, color: red, axle configuration: 2 axles, gearing type: mechanical, Year of construction: 1994, total length: 6,520 mm, total width: 2,500 mm, total height: 3,250 mm, Equipment: all wheel drive, Very clean fire engine, TLF 16/46 model, on an Iveco Eurocargo 135E23 chassis. Water tank: 4600 liters, with rear-mounted pump 16/8 and roof-mounted monitor, 2000 liters/min. Body: Magirus, 1x quick-attack hose reel on the right side. Podpfx Anjzq I Uzsyerb All-wheel drive 4x4 with 3x differential locks (front/center/rear) and AP axles on the front. 3 seats in the cab. Tire size (front): 10Rx22.5 140/137 K, DOT 2026 Tire size (rear): 10Rx22.5 144 K, DOT 2021 Well-maintained condition and immediately ready for use. Last repairs: Brake diaphragm cylinder replaced in 2024 Engine oil change in 2023 Steering linkage rod replaced in 2022 Clutch slave cylinder replaced in 2021 +++ Errors, changes, and prior sale reserved.

Condition: used, mileage: 32,908 km, power: 169 kW (229.78 HP), first registration: 05/1992, overall weight: 13,500 kg, fuel type: diesel, color: red, axle configuration: 2 axles, next inspection (TÜV): 10/2026, gearing type: mechanical, total width: 2,500 mm, total height: 7,300 mm, Equipment: ABS, all wheel drive, M.A.N 12.232 FA 4x4 Tank Firefighting Vehicle TLF 16 / 24 Double Cab First registration: 25.05.1992 32,908 kilometers Wheelbase: 3,600 mm ABS Power steering All-wheel drive Double H - 8-speed gearbox Creeper gear Differential lock Fog lights Radio Heated exterior mirrors Air-suspended driver and passenger seats Double cab with 9 seats (roof walkable) Margin taxed according to § 25a UStG Prodpfx Anjyawdreyjb Tyres: 10 R 22.5 M&S Spare wheel Rockinger towing hitch 12/24 volt socket Bodywork by METZ 2,360 liter water tank Light mast Rapid intervention reel at rear right (hose reel) Metz pump 16/8 Valid TÜV inspection until 10/26 Firefighting vehicle

Condition: used, mileage: 51,550 km, power: 220 kW (299.12 HP), first registration: 09/2016, fuel type: diesel, empty load weight: 11,154 kg, maximum load weight: 4,846 kg, overall weight: 16,000 kg, tire size: 11R22.5, axle configuration: 4x4, wheelbase: 3,860 mm, brakes: engine braking, color: red, driver cabin: day cab, gearing type: automatic, emission class: euro6, suspension: steel, number of seats: 7, Equipment: ABS, additional headlights, air conditioning, all wheel drive, cabin, cable winch, cruise control, differential lock, fog lights, immobilizer system, low noise, onboard computer, power assisted steering, seat heater, Vehicle location: Bovenden, ClassicSpace, license plate Haus, swing seat, electric mirrors, heated mirrors, left electric window, right electric window, air conditioning, cruise control, ABS (anti-lock braking system), retarder, power take-off, automatic, differential lock, fog lights, work lights, revolving beacon, storage box, leaf suspension, underride protection, roof hatch, winch, green environmental badge Wheelbase: 3860 mm Body: Rosenbauer tank fire engine TLF with 3000l water tank, foam tank, built-in pump & winch, 6t front axle, rear axle hypoid 11t ring gear 390, differential lock front and rear axle, ABS, switchable ABS, drum brakes on front and rear axle, brake system rupture protection, condensate monitoring for compressed air system, rear axle stabilizer, programmable special module (PSM), classic cockpit, pollen filter, reversing warning device, automatic transmission 5/3.49-0.75 Allison 3000PR with retarder, daytime running lights, high performance engine brake, power take-off operation with range selection lock, power take-off NA CS40-b/1.7, high position, flange. ACCESSORY INFORMATION WITHOUT WARRANTY, subject to changes, prior sale and errors! Prjdpjvhi R Asfx Anyob - .

Condition: ready for operation (used), Year of construction: 2008, functionality: fully functional, 1 Panel Sizing Saw with Storage System Manufacturer: HOLZMA Model: PROFILINE HPL 530/56/22 – right-hand machine Year: 2008 Including integrated storage system PROFI TLF610/10/05/L Manufacturer: BARGSTEDT Year: 2013 Woodstore inventory management software, offcut management, etc. Storage area approx. 37 x 11.5 m Max. stack height in storage: 2,500 mm Speed Concept: sets completely new standards that revolutionize panel dividing technology. + Significantly higher speed and dynamic acceleration of the saw carriage. + Extreme acceleration of the program pusher. + Central angle alignment device. + Electronic height control of the pressure beam. + Optimized motion sequences via integrated gripper measuring system. Cutting length: 5,600 mm Cutting width (program pusher travel): 5,600 mm Panel rotation device for head cuts Laser guide light: marks the cutting line on the workpiece for visible or scribed cuts. Lift table feeding Lift table size: 5,600 x 2,200 mm PROFILINE VAC infeed carriage 5,600 mm Psdpfsyw Ivhox Anyerb Separate infeed carriage for gentle loading of sensitive single panels via vacuum, as well as efficient infeed of panel packs. Saw blade projection: 130 mm Saw carriage feed: Forward 1-150 m/min Reverse constant 150 m/min Program pusher speed: Forward/reverse 90 m/min (in EU countries forward = 25 m/min) Automatic pressure beam height control: yes Automatic cutting height: yes Adjustable pressure beam contact pressure: yes Adjustable gripper contact pressure: yes Gripper release: yes Fully air-cushioned machine table (saw body): yes Angle alignment device: Min. alignment width: 0 mm Max. alignment width: full cutting length Main saw motor (at 50 Hz): 18.0 kW Frequency control: 1,700 – 4,200 rpm Scoring saw motor: 2.2 kW Operating voltage: 400 V / 50 Hz Working height: 1,020 mm SPZ UNIT W. LIFT ELEMENT 2-FINGER 11/510/530 AUTOMATIC EJECTOR FENCE Program-controlled ejection of panel packs to the area of the air cushion tables. FULLY AUTOMATIC SCORING SAW ADJUSTMENT TYPE 530 Camera-controlled GROOVE PROGRAM (AUTOMATIC) Groove program with graphical input and sequence display. Positioning accuracy: Groove depth is steplessly variable via control (hydraulic stop). CUT-OUT/STRESS RELIEF CUTTING PROGRAM LABELLING WITH PART GRAPHICS LABEL PRINTER TYPE PICA 108 Thermal / thermotransfer label printing station OPTIMIZATION PROGRAM 'CAD-PLAN' -JUST-IN-TIME- Additional 'Just-in-time' function (possible operating modes): 1. Optimization at the saw ----- - Possible import of part lists from industry packages, Excel, etc. - Incorporates available offcuts in optimization - In case of production interruption, unproduced parts can be re-optimized - Flexible selection of which parts with which material are optimized and produced at which time 2. Transfer of optimized data to the saw - Modification of optimized cutting plans at the saw: - Delete/add parts - Add available offcuts - Change panel sizes - Combine runs, etc. New optimization is performed directly at the saw. ONLINE DATA TRANSFER + USB PORT CAMERA MONITORING OF THE FEED AREA Material specifications for lift table feed: Max. waviness: 40 mm/m Panel thickness min. 6 mm Thickness tolerance per panel max. +/- 0.2 mm Stacking accuracy +/- 50 mm

Condition: used, mileage: 62,200 km, power: 350 kW (475.87 HP), first registration: 07/2000, overall weight: 18,000 kg, fuel type: diesel, color: red, axle configuration: 2 axles, gearing type: mechanical, emission class: euro2, Year of construction: 2000, total width: 2,500 mm, total height: 3,900 mm, Equipment: ABS, air conditioning, all wheel drive, parking heater, * MB Actros 1848 All-Wheel Drive 4x4 with leaf suspension * Superstructure by Ziegler * Water tank 2,480 L * Foam tank 510 L * Powder tank 250 kg * CO2 extinguishing system 480 kg * Foam extinguishing system * Rescue platform and fire-fighting platform at the front, max. height 3.8 m, load capacity 300 kg * External planetary axles * Speed limiter up to 140 km/h * Axle ratio i=4.833 (HL7) * Wheelbase 3,900 mm * V8 engine LA 350 kW (476 hp) at 1,800 rpm * Transmission oil cooling * Auxiliary drive NF1 MB 125-10b, flange, medium speed * Auxiliary drive NZ 1, single * Auxiliary drive NZ 4 with shafts * Drum brakes * Telligent 16-speed gearbox with clutch pedal (automated shifting, clutch pedal foldable) * Reinforced clutch * Transmission G240-16/11.7-0.69 * Transfer case VG2400-3W, 1-speed * Reinforced springs, front and rear axles * Front axle rated at 9 t * Rear axle rated at 13 t * Front axle springs 10.5 t * Rear axle springs 13 t * Weight variant 21.5 t approval (10.0/13.0), e.g. for winter service * Circuit breakers * Reinforced cab suspension * Tires 395/85 R 20, 80-90% Michelin * Technical and operational total weight 20,500 kg * Transfer case with reduction * Differential locks front and rear axle * Reinforced frame * Reinforced stabilizers for extreme heavy-duty applications * Reinforced steering * Medium-length cab * Electric window on passenger side * Air conditioning * Stationary hot air heater Eberspächer D1 LP * Various additional spotlights Psdpfjy Tq Npox Anysrb * Trailer brake system * NATO trailer hitch * and much more * Subject to errors, changes, and prior sale

Condition: used, mileage: 62,200 km, power: 350 kW (475.87 HP), first registration: 07/2000, overall weight: 18,000 kg, fuel type: diesel, color: red, axle configuration: 2 axles, gearing type: mechanical, emission class: euro2, Year of construction: 2000, total width: 2,500 mm, total height: 3,900 mm, Equipment: ABS, air conditioning, all wheel drive, parking heater, * MB Actros 1848 All-Wheel Drive 4x4 with leaf suspension * Superstructure by Ziegler * Water tank 2,480 L * Foam tank 510 L * Powder tank 250 kg * CO2 extinguishing system 480 kg * Foam extinguishing system * Rescue platform and fire-fighting platform at the front, max. height 3.8 m, load capacity 300 kg * External planetary axles * Speed limiter up to 140 km/h * Axle ratio i=4.833 (HL7) * Wheelbase 3,900 mm * V8 engine LA 350 kW (476 hp) at 1,800 rpm * Transmission oil cooling * Auxiliary drive NF1 MB 125-10b, flange, medium speed * Auxiliary drive NZ 1, single * Auxiliary drive NZ 4 with shafts * Drum brakes * Telligent 16-speed gearbox with clutch pedal (automated shifting, clutch pedal foldable) * Reinforced clutch * Transmission G240-16/11.7-0.69 * Transfer case VG2400-3W, 1-speed * Reinforced springs, front and rear axles * Front axle rated at 9 t * Rear axle rated at 13 t * Front axle springs 10.5 t * Rear axle springs 13 t * Weight variant 21.5 t approval (10.0/13.0), e.g. for winter service * Circuit breakers * Reinforced cab suspension * Tires 395/85 R 20, 80-90% Michelin * Technical and operational total weight 20,500 kg * Transfer case with reduction * Differential locks front and rear axle * Reinforced frame * Reinforced stabilizers for extreme heavy-duty applications * Reinforced steering * Medium-length cab * Electric window on passenger side * Air conditioning * Stationary hot air heater Eberspächer D1 LP Pedpfx Aey Tq Rmenysrb * Various additional spotlights * Trailer brake system * NATO trailer hitch * and much more * Subject to errors, changes, and prior sale

Condition: used, mileage: 20,498 km, power: 177 kW (240.65 HP), first registration: 05/1998, overall weight: 12,000 kg, fuel type: diesel, color: red, axle configuration: 2 axles, gearing type: automatic, loading space width: 2,480 mm, loading space length: 3,700 mm, loading space height: 1,750 mm, Year of construction: 1998, total length: 7,250 mm, total width: 2,500 mm, total height: 3,050 mm, Equipment: ABS, all wheel drive, parking heater, Water tank, GRP, 2340 liters +++ Quick-release coupling at the rear right with spray nozzle 6-cylinder in-line diesel engine with turbocharger and intercooler, 5-speed manual transmission 4x4 all-wheel drive, switchable with off-road reduction 2x differential locks: center + rear (rear axle + transfer case) 1x auxiliary drive for mounting a pump at the rear FP16/8 Tire chains on the rear axle Very well-maintained tank fire engine TLF 16/25, superstructure by Ziegler Pump Ziegler 16/8 Automatic transmission (shifts smoothly and without jerks), ABS 6 seats registered, 2 prepared for self-contained breathing apparatus (SCBA) wearers Podpfxszy Td Ts Anyerb Maximum permissible total weight: 12,000 kg according to documents Superstructure dimensions, external: 3700x2480x1750 (LxWxH in mm) Internal dimensions of the cab at the rear (from the driver's seat): 1700x2000x1540 (LxWxH in mm) Wheelbase: 3640 mm Tires 10 Rx22.5 Maximum speed: 93 km/h (according to documents) The vehicle runs well and is immediately ready for use. Technical inspection carried out, including lubrication, replacement of the air dryer cartridge, and cleaning of the diesel tank. All fuel lines have been renewed, and the V-belt has been tightened. +++ Errors, changes, and prior sale reserved +++ €125

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2003, operating hours: 5,000 h, machine/vehicle number: 90201097-0010/2003, screw conveyor diameter: 44 mm, screw conveyor length: 2,420 mm, For sale is a twin-screw extruder from the renowned company Berstorff, manufactured in 2003, for the production and processing of demanding rubber and TPE compounds. The system was operated in a pilot plant of a research institute and was used exclusively for research and development purposes. Unlike systems used in industrial production, the extruder was therefore not used in continuous production. Accordingly, the machine has only a few operating hours. The extruder is particularly suitable for research and development departments, compounders, and companies in the rubber and plastics industry that are looking for a high-performance system for trials, recipe development, material testing, and small-batch production. The detailed technical data and the available screw elements can be found in the attached documentation. The existing equipment allows for flexible configuration of the screw for different compounding tasks. Prodpfxjz Eqwre Anyjb

Condition: used, mileage: 30,788 km, power: 177 kW (240.65 HP), first registration: 10/1997, overall weight: 12,000 kg, fuel type: diesel, color: red, axle configuration: 2 axles, gearing type: mechanical, Year of construction: 1997, total length: 7,400 mm, total width: 2,500 mm, total height: 3,200 mm, Equipment: ABS, all wheel drive, Well-maintained Iveco Eurocargo as a TLF16/25 fire engine with a 2400-liter water tank. Superstructure by Magirus All-wheel drive 4x4 with off-road gearing 3x differential locks: front-center-rear Rear-mounted pump FP16/8 Water tank 2400L 2x quick-attack hose reels (left and right) Rotating beacon Single tires 385/55 R 22.5 M+S Pjdpfx Aezy Tfdsnysrb Snow chains on the rear axle Immediately ready for operation +++ Errors, changes, and prior sale reserved.

Year of construction: 1996, condition: ready for operation (used), A CNC punching and laser machine from Trumpf requiring repair, including laser source and high-frequency generator, is available. Cutting force: 220kN, laser power: 1500W, clamping power: 11kW, weight: approx. 18000kg. Error message: NCK deleted and buffer battery empty. An on-site inspection is possible. Pjdpozfaalefx Anyorb

Condition: new, functionality: fully functional, power: 235.36 kW (320.00 HP), fuel type: diesel, fuel: diesel, Equipment: additional headlights, airbag, differential lock, electric window regulation, trailer coupling, TLF 3000 All-Wheel Drive on Off-Road MAN TGM 13.320 All-Wheel Chassis Now with increased engine power! Ideally suited for small and medium-sized fire brigades in rural areas that require a compact and robust vehicle capable of handling a wide range of tasks while also needing a large water supply. Chassis: MAN TGM 13.320 4x4 EURO 6 with 320 HP (235 kW), automated transmission Single tires with same track width for superior off-road capability Cab: Psdpfxjy Hqlkj Anyorb Standard crew cab (1:5) in RAL 3000 (fire red) Air conditioning and auxiliary heater Standard 4 SCBA mounts in the crew compartment Body: High-quality frame construction using rust and corrosion-free materials Folding steps at each side equipment compartment Individually customized stainless steel equipment storage Walkable, non-slip vehicle roof Pump/Extinguishing Media Tank: Maintenance-free combined normal/high pressure pump FPN 2000-10 PUMP&ROLL capable Output: 2,000 l/min at 10 bar and 400 l/min at 40 bar Integrated, stepless foam proportioning system 4,000 l water tank with integrated 400 l foam agent tank Additional heating in pump compartment Firefighting Features: High-pressure rapid attack system with 50 m rigid hose Foam/water monitor (2,000 l/min) on the roof Self-protection system with 4 spray nozzles in front of the wheels Safety and Lighting: LED lightbar on the roof / 2 LED front flashers Pneumatic Martin-horn special signaling system 100 W loudspeaker system with PA unit Rear-view camera Comprehensive LED lighting in crew and all equipment compartments LED area lighting and auxiliary white lights on the body Pneumatic LED light mast with remote control Optional hygiene board We would be pleased to provide you with a detailed offer and comprehensive demonstration of the vehicle at our Berlin location. All information provided to the best of our knowledge, without guarantee for completeness or accuracy. This advertisement does not constitute an offer, but serves as information only. Subject to prior sale!

Condition: used, mileage: 21,815 km, power: 324 kW (440.52 HP), first registration: 03/2018, fuel type: diesel, overall weight: 18,000 kg, axle configuration: 2 axles, color: red, gearing type: automatic, emission class: euro5, Year of construction: 2018, Equipment: ABS, all wheel drive, electronic stability program (ESP), navigation system, MAN TGS 18.440 Fire Department 4x4 Magirus TLF 4000 * EZ: 01.03.2018 * 21,815 km * EURO 5 * Automatic * Wheel arrangement 4x4 * TLF 4000 * 10518 cc * 324 kW * Ringfeder trailer coupling * Rettbox charging connection * Empty weight: 11,230 kg * Permissible total weight: 18,000 kg * Technically possible total weight: 21,000 kg * PROTEK monitor on the front of the bumper: Working pressure 200 PSI at 14 bar * Alco APF 2.5 -C -HH on the roof: 2,000 l/min, 16 bar * Magirus fire department body * Magirus fire extinguishing centrifugal pump * Teklite Floodlight mast TF440XB/4 * Tires: Conti Scandinavia HS3 front 385/65 R 22.5 14 mm & 14 mm * rear 315/80 R 22.5 12/14 mm & 13/13mm * Leader Mix 200-1000 v2 * TLF 4000 standard * Water tank: 4500 l * Foam tank 300 l * Second foam tank 200 l * 3 seats * Wheelbase 3.95 meters * ABS * ASR * German truck * 1 car owner * All information without guarantee * Further information and criteria on additional services * Repainting, retrofitting possible * Temporary license plate Customs license plate / License plate * Transfer and shipment possible / Transfer and shipment possible * Help with customs and export documents / Help with customs and export documents * Procurement of COC and EUR documents / Procurement of COC and EUR documents * On the market since 1991 / Since 1991 on the market * Leasing and financing possible. We have been working with various leasing companies for many years and can therefore find the optimal financing for every customer. We can also often support customers with poor credit ratings and put them in touch with good leasing partners. Predpfxem Ti Axe Anyeb * Own workshop / own workshop * Mówimy po polsku. * We speak English. * Goworim po russki * The repainting in your desired color is possible in our house at a reasonable price and in good quality. * Are you further away and have no opportunity or time to view and inspect a truck with us? You are further away and have no possibility or time to visit and check a truck with us? No problem, you are welcome to order an independent expert of your confidence and have the truck checked technically and visually. If, contrary to expectations, a deficiency should occur, we can fix it quickly and effectively in our workshop. Furthermore, we can deliver your new used cars for a surcharge Europe-wide.

Condition: used, mileage: 37,500 km, power: 177 kW (240.65 HP), first registration: 08/1997, fuel type: diesel, empty load weight: 7,860 kg, maximum load weight: 5,640 kg, overall weight: 13,500 kg, axle configuration: 4x4, color: red, gearing type: mechanical, Equipment: all wheel drive, differential lock, hydraulics, trailer coupling, All-wheel drive, 2 differential locks, Power take-off, 6 gears, Suitable as a fire engine (TLF16), Fire water tank with a capacity of 1600 liters, Hose reel, Metz fire pump, Quick-attack hose, Pedpex Ec N Nofx Anyjrb Metz aluminum superstructure, Total weight 13.5 t, Payload 5.64 t, Trailer hitch, Good condition, Vehicle runs smoothly, Firefighting equipment has not been checked for functionality, German registration There may be markings on the vehicles. Mileage according to odometer Vehicle is preferably sold to businesses or for export, Private sale subject to approval Sale without warranty The above information is non-binding, errors/changes and prior sale reserved!!! Telephone: 08026/2188

Condition: used, mileage: 37,500 km, power: 177 kW (240.65 HP), first registration: 08/1997, fuel type: diesel, empty load weight: 7,860 kg, maximum load weight: 5,640 kg, overall weight: 13,500 kg, axle configuration: 4x4, color: red, gearing type: mechanical, Equipment: all wheel drive, differential lock, hydraulics, trailer coupling, All-wheel drive, 2 differential locks, Power take-off, 6 gears, Suitable as a fire engine (TLF16), Fire water tank with a capacity of 1600 liters, Hose reel, Metz fire pump, Quick-attack hose, Metz aluminum superstructure, Total weight 13.5 t, Payload 5.64 t, Trailer hitch, Good condition, Vehicle runs smoothly, Firefighting equipment has not been checked for functionality, German registration There may be markings on the vehicles. Mileage according to odometer Vehicle is preferably sold to businesses or for export, Pedpfex Ec Sksx Anyjrb Private sale subject to approval Sale without warranty The above information is non-binding, errors/changes and prior sale reserved!!! Telephone: 08026/2188

Condition: excellent (used), Cnc rotary table, Nikken 5AX-230 4 and 5 axis for Mazak etc. was mounted on a VTC 300, due to new machine 5 axis now for sale, Pedsp U Umkepfx Anyorb

Year of construction: 2001, condition: excellent (used), I sell the 2-head 4-lamp UV-drying tunnel Cefla Ecolight TLF/BB/4+TTE 4000 Year 2001 Working width 1400mm. Total length 4,00m Total power 74,3 kW Psdpfxei Eup Ej Anyerb Very good condition, available immediately.

Condition: ready for operation (used), Year of construction: 2006, functionality: fully functional, operating hours: 12,666 h, power: 12 kW (16.32 HP), MACHINING CAPACITIES: - X-axis (U) vertical milling travel: 3875 mm, 3170 mm between stops - Y-axis (V) milling travel: 1390 mm between stops, for drilling: 1201 mm - Z-axis (W) milling travel: 290 mm Maximum workpiece height (thickness), effective travel: 110 mm Psdjy Nb Tkspfx Anyorb For further details, see aggregate travel schematic - Maximum traverse speeds: X-axis (U): 60 m/min Y-axis (V): 50 m/min Z-axis (W): 20 m/min MACHINE CONFIGURATION: - Worktable with 6 mobile support beams, equipped with several vacuum pods and pneumatic clamps 2 pneumatic connections per beam for clamps, usable capacity ranging from 44 to 78 mm 6 rear stops 6 intermediate stops 3 right lateral stops 3 left lateral stops 4 lifting blades (for loading/unloading assistance) Table divided into 2 working zones - Becker VTLF vacuum pump 250 m3/h, 5.5 kW with air filter - Pfannenberg cooling unit 1.7 kW - Chip conveyor belt - X-axis movement by rack and pinion, Y & Z axes by ball screw and bearing block (high-precision linear guides with automatic lubrication) - Aggregates on swan-neck, composed as follows: • 12 kW HSD milling/routing unit - Toolholder type: HSK 63 F - Variable spindle speed 6000 - 24000 rpm - Inverter-controlled - Surround extraction hood - Onboard tool magazine with 10 stations + additional 12-station magazine • 11-spindle drilling unit, 1.7 kW - Center distance between spindles: 32 mm - Spindle speed: 4000 rpm - 11 vertical spindles (8 along X, 3 along Y) - 2+2 horizontal spindles on X - 1+1 horizontal spindles on Y • Control panel - Windows PC - Network card and Ethernet connection - Software: Masterworks and user manual - DXF conversion and direct execution of ISO, TLF, DXF - Pre-programmable zones - Remote control OTHER FEATURES: - Overall electrical supply: 400V, 3Phases+N+E, 50Hz Nominal current: 58.6A, 46.6 KVA - Pneumatic supply: 7/8 Bar - Average consumption: 100Nl/min - Extraction Lower port Ø120 mm, upper port Ø250 mm Recommended flow rate: 6500 m3/h at 20 m/s - CE certified, safety zones and protective grille Lockable isolator, emergency stops Operating footprint: see schematic Transport dimensions: to be specified during equipment preparation Estimated total weight: 2400+350+350 kg Please contact us for supply of consumables, accessories and/or extraction systems. Original documentation, manual, spare parts list, electrical and pneumatic diagrams, service keys, software and license keys included.

Condition: used, mileage: 18,362 km, power: 177 kW (240.65 HP), first registration: 01/1994, fuel type: diesel, overall weight: 12,000 kg, axle configuration: 2 axles, color: red, gearing type: mechanical, total length: 7,230 mm, total width: 2,500 mm, total height: 3,090 mm, Equipment: ABS, all wheel drive, +++ Clean fire engine tanker with only 18,362 original kilometers +++ immediately ready for use Water tank: 2350 liters, rear-mounted pump FP 16/8 All-wheel drive 4x4 with 2x differential locks in the center and rear, ABS, special signaling system Fresh inspection including lubrication and a new fuel filter, as well as a new air dryer cartridge, will be carried out (as of 09/2026) Pedpfoz Amnwsx Anysrb +++ Errors, changes, and prior sale reserved.

Condition: used, mileage: 21,815 km, power: 324 kW (440.52 HP), first registration: 03/2018, fuel type: diesel, overall weight: 18,000 kg, axle configuration: 2 axles, color: red, gearing type: automatic, emission class: euro5, Year of construction: 2018, Equipment: ABS, all wheel drive, electronic stability program (ESP), navigation system, MAN TGS 18.440 Fire Brigade 4x4 Magirus * Registered: 03/01/2018 * 21,815 km * EURO 5 * Automatic transmission * Wheel arrangement 4x4 * TLF 4000 Prodpfsk Uub Uex Anyeb * 10518 ccm * 324 kW * Trailer coupling Ringfeder * Tires: Conti Scandinavia HS3, front 385/65 R 22.5, 14 mm & 14 mm * rear 315/80 R 22.5, 12/14 mm & 13/13 mm * Wheelbase 3.95 meters * ABS * ASR * German vehicle * Trailer coupling Ringfeder * Equipment box with charging connection * PROTEK monitor at the front on the bumper: Working pressure 200 PSI at 14 bar * Alco APF 2.5 -C -HH on the roof: 2,000 l/min, 16 bar * Magirus fire brigade superstructure * Magirus fire pump * Teklite floodlight mast TF440XB/4 * Tires: Conti Scandinavia HS3, front 385/65 R 22.5, 14 mm & 14 mm * rear 315/80 R 22.5, 12/14 mm & 13/13 mm * Leader Mix 200-1000 v2 * TLF 4000 Standard * Water tank: 4500 l * Foam tank: 300 l * Second foam tank: 200 l * 3 seats * Wheelbase 3.95 meters * ABS * ASR * German vehicle * 1 vehicle owner * All information without guarantee * Further information and criteria on additional services * Repainting, retrofitting possible * Short-term registration / customs license plate * Transfer and shipment possible * Assistance with customs and export documents * Procurement of COC and EUR documents * On the market since 1991 * Leasing and financing possible. We have been working with various leasing companies for many years and can therefore find the optimal financing for every customer. We can often also support customers with poor credit and provide contact to good leasing partners. * Own workshop * Mówimy po polsku. * We speak English. * Goworim po russki * Repainting in your desired color is possible in our workshop at a reasonable price and in good quality. * Are you located further away and do not have the possibility or time to visit and inspect a truck with us? No problem, you are welcome to order an independent expert of your choice and have the truck checked technically and visually. If, contrary to expectations, a defect should occur, we can fix it quickly and effectively in our workshop. Furthermore, we can deliver your new used vehicle throughout Europe for an additional charge.

Condition: used, mileage: 30,940 km, power: 141 kW (191.71 HP), first registration: 06/1984, overall weight: 12,000 kg, fuel type: diesel, color: red, axle configuration: 2 axles, gearing type: mechanical, Equipment: all wheel drive, * Anfragen gerne per WhatsApp * Feuerwehrfahrzeug * Mercedes NG 1019 AF * Selbstfahrende Arbeitsmaschine * Wassertank 2600 Liter * PUmpe FP 28/8 * Wasserkreiselpumpe FP 16 * Staubox * 3- Sitzer vorne * 6 Sitzer hinten * Allrad * Geländegang * Differenzialsperren * Radstand ca. 3,60 m * 5 Gang * Reifen Psdsqlw Dropfx Anyjrb * 10R22,5 ca. 70-80% * Aufbau Länge ca 3,70 m * Behördenfahreug * · Netto-Verkauf innerhalb der EU wird nur noch mit MWST Kaution und dem Nachweis der Zulassung im Bestimmungsland (Gelangensbestätigung) durchgeführt, · Verkauf nur an Gewerbe, Transport zum Hafen möglich, Dieses Angebot ist unverbindlich und freibleibend. Irrtum und Zwischenverkauf vorbehalten. · Keine Gewähr auf Eingabefehler. Transport zum Hafen möglich Besichtigungen nur nach Vereinbarung, WhatsApp

Condition: new, functionality: fully functional, power: 375.1 kW (509.99 HP), axle configuration: 4x4, fuel: diesel, emission class: euro6, Year of construction: 2025, Equipment: additional headlights, airbag, parking heater, trailer coupling, From our range of new vehicles, we offer you: TLF 3000 All-Wheel Drive on a rugged MAN TGM 13.290 4x4 Off-road Chassis This vehicle is ideal for small and medium-sized fire departments in rural areas looking for a compact and robust truck capable of handling a wide variety of tasks while providing a large water supply. Chassis: • MAN TGM 13.290 4x4 EURO 6 with 290 HP (213 kW) and automated transmission • Single tires with matching track for excellent off-road capability Cab: • Standard crew cab (1:5) in RAL 3000 (fire red) • Air conditioning and auxiliary heater • Standard 4 SCBA holders in the crew compartment Bodywork: • High-quality frame construction using stainless and corrosion-free materials • Folding steps for each side equipment compartment • Customizable stainless steel equipment mountings to your specifications • Walkable, non-slip roof Predpfx Anjxyunasyob Vehicle Pump/Extinguishing Agent Tank: • Maintenance-free combined normal/high pressure pump FPN 2000-10 • PUMP&ROLL capable • Output 2,000 l/min at 10 bar and 400 l/min at 40 bar • Integrated, infinitely adjustable foam proportioning system • 4,000 l water tank with integrated 400 l foam agent tank • Additional heating in the pump compartment Firefighting Equipment: • High-pressure rapid intervention line with 50 m of rigid hose • Foam/water monitor (2,000 l/min) mounted on the roof • Self-protection system with 4 nozzles in front of the wheels Safety and Lighting: • LED lightbar on the roof / 2 LED front flashers • Pneumatic special signal system (Martin horn) • 100 W public address system with microphone • Reversing camera • Comprehensive LED lighting in crew and all equipment compartments • LED perimeter lighting on the superstructure plus additional work lights • Pneumatic LED light mast with remote control • Optional hygiene board available We would be pleased to provide you with a detailed offer and present the vehicle to you at our location in Berlin. All information provided to the best of our knowledge and belief, no guarantee for completeness or accuracy. This advertisement constitutes information only and does not represent a binding offer. Subject to prior sale!

Condition: new, functionality: fully functional, power: 235.36 kW (320.00 HP), axle configuration: 4x4, fuel: diesel, color: red, gearing type: semi-automatic, emission class: euro6, Year of construction: 2025, Equipment: air conditioning, airbag, all wheel drive, central locking, differential lock, trailer coupling, From our portfolio of new vehicles, we offer: TLF 4000 All-wheel drive on an off-road MAN TGM 18.320 all-wheel chassis Our Water Buffalo on MAN Hardly any terrain is too difficult for it. Calm and powerful, it reliably delivers its load to the destination. At the incident site, it demonstrates its full capabilities—transporting crew, equipment, and sufficient extinguishing agents to the scene, supported by a high-performance pump. Chassis: • MAN TGM 18.320 4x4 EURO 6 with 320 HP (235 kW) • Automated transmission • Off-road tires • Single wide tires matched to track width for maximum off-road capability Cab: • Standard crew cab (1+5) in RAL 3000 (fire red) • Air conditioning and auxiliary heater • Standard 4 SCBA mounts in the crew compartment Superstructure: • High-quality frame-style superstructure made from stainless and corrosion-resistant materials • Folding steps for each side-mounted equipment compartment • Individually customised stainless steel equipment storage solutions • Walkable, non-slip vehicle roof Vehicle pump / Extinguishing agent tank: • Maintenance-free combined normal/high-pressure pump TITAN S40HP FPN 4000-10 • PUMP & ROLL capable • Output: 4,000 l/min at 10 bar and 400 l/min at 40 bar • Integrated, infinitely variable foam proportioning system • Water tank 5,000 l with integrated 500 l foam agent tank • Auxiliary heater in the pump compartment Podoxzu Ehjpfx Anyerb Firefighting equipment: • High-pressure rapid intervention reel with 50 m rigid hose • Roof-mounted foam/water monitor, 2,000 l/min • Self-protection system with 4 spray nozzles in front of the wheels Safety and lighting: • LED lightbar on the roof / 2 LED front flashers • Pneumatic special signal system Martin-Horn • 100 W PA system with announcement unit • Rear-view camera • Comprehensive LED lighting in crew and all equipment compartments • LED scene lighting on the superstructure and additional spotlight • Pneumatic LED light mast with remote control • Hygiene board available on request We would be happy to provide you with a detailed offer and present the vehicle to you at our site in Berlin. All details provided to the best of our knowledge and belief, without guarantee for completeness or accuracy. This advertisement constitutes information and is not a binding offer. Subject to prior sale!

Condition: good (used), Year of construction: 2005, operating hours: 63,102 h, machine/vehicle number: A0230A1162, control type: CNC control, controller manufacturer: Siemens, controller model: Sinumerik 840D, laser type: CO₂ laser, laser source manufacturer: Trumpf, laser hours: 28,387 h, laser power: 6,000 W, sheet thickness steel (max.): 25 mm, sheet thickness stainless steel (max.): 20 mm, sheet thickness aluminum (max.): 15 mm, working length: 3,000 mm, working width: 1,500 mm, working height: 115 mm, TRUMPF Trumatic L3050 Laser Cutting Machine Year of manufacture: 2005 Control system: Sinumerik 840D Laser type: TLF 6000 Laser power: 6000 W Working area X: 3000 mm Working area Y: 1500 mm Working area Z: 115 mm Max. speed X: 60 m/min Max. speed Y: 60 m/min Laser on hours: 63,102 h, Beam on hours: 28,387 h Max. sheet thickness (mild steel): 25 mm Max. sheet thickness (stainless steel): 20 mm Max. sheet thickness (aluminum): 15 mm Equipment: HI-LAS high-pressure cutting Cutting head with 5" lens Cutting head with 7.5" lens Quick-change cutting heads Sheet position detection system Laser positioning diode Programmable selection of cutting gases with stepless pressure adjustment Micro welds PMS plasma monitoring system Sprint-Las Head distance regulation (DIAS III) ContourLas AutoLas Plus Oil spray system Hydraulic pallet changer Work area lighting Longitudinal conveyor Prodpox Ap A Rjfx Anysb Sectional extraction system Filtration system Automatic shut-off Light barriers Tele-service RJ 45 3.5'' floppy disk drive User manual Used machine in good condition, inspected by qualified personnel. Machine available in March 2026.

Condition: excellent (used), Year of construction: 1990, functionality: fully functional, machine/vehicle number: 9443, total height: 3,160 mm, ram adjustment: 64 mm, total width: 1,300 mm, total length: 2,470 mm, conveyor belt width: 160 mm, pressing force: 50 t, control cabinet height: 1,100 mm, control cabinet length: 1,250 mm, control cabinet width: 400 mm, type of input current: AC, stroke adjustment: 1,651 mm, clearance between the columns: 250 mm, working width: 950 mm, input voltage: 380 V, overall weight: 8,600 kg, control voltage: 24 V, conveyor belt thickness: 4 mm, pressure: 5 bar, compressed air connection: 10 bar, input frequency: 50 Hz, punching force: 50 t, BRUDERER BSTA 50HL (500 kN, year of manufacture 1990, order no. 9443) HIGH-PERFORMANCE STAMPING PRESS 100-1000 SPM Technical data Press manufacturer: BRUDERER AG, Frasnacht, Switzerland Machine model: BSTA 50 HL Serial/order number: Order no. 9443 Year of manufacture: 1990 Total weight approx.: 8,700 kg Soundproof cabin: W 3,460 × L 2,331 × H 3,910 mm (optional extra) Stroke range (adjustable): 16 / 19 / 25 / 32 / 38 / 44 / 51 mm Ram adjustment range: 64 mm Tool opening width (max.): 950 mm Support plate – width × depth: 940 × 650 mm Base plate opening W × D: 900 × 200 mm Strip feed height (adjustable): 60 – 140 mm Max. strip feed width: 250 mm Feeder: BBV 195 - 85 Feed angle: 90 degrees Max. strip thickness: 4 mm, strip width: 160 mm Feed length: 0 – 85 mm Psdpjzq Sdyjfx Anyorb Supply voltage: 3 × 380 V / 50 Hz Main motor power: 28 kW Control voltage (DC): 24 V DC Pneumatic supply: 6 – 10 bar (R ½" connection) Press width (with feeder): approx. 2,471 mm Press depth: approx. 1,302 mm Press height: approx. 3,165 mm Price including transport in Europe Original technical documentation and circuit diagrams Optional: Sound-insulating safety cabin/enclosure

Condition: excellent (used), Year of construction: 2015, operating hours: 1,463 h, functionality: fully functional, travel distance X-axis: 500 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 400 mm, rapid traverse X-axis: 20 m/min, rapid traverse Y-axis: 20 m/min, rapid traverse Z-axis: 20 m/min, controller manufacturer: HEIDENHAIN, controller model: TNC 620, workpiece weight (max.): 250 kg, total length: 908 mm, total width: 480 mm, overall weight: 3,250 kg, spindle speed (max.): 12,000 rpm, spindle nose: ISO 30, number of spindles: 1, number of slots in tool magazine: 20, tool length: 240 mm, tool diameter: 130 mm, tool weight: 3,000 g, input voltage: 400 V, type of input current: three-phase, Equipment: documentation/manual, CNC Machining centre FEHLMANN Picomax 56 TOP TECHNICAL CHARACTERISTICS: Year of manufacturing: 2015 CNC control: HEIDENHAIN TNC 620 Stroke X axis: 500 [mm] Stroke Y axis: 400 [mm] Stroke Z axis: 400 [mm] Feed rate on X, Y and Z axes: 20000 [mm/min] Min. distance spindle nose / table: 120 [mm] Max. distance spindle nose / table: 520 [mm] Table dimensions: 908 x 480 [mm] Max. load on table: 250 [Kg] Spindle type: ISO 30 Max. spindle speed: 12000 [rpm] Tool changer magazin number of stations: 20 Max. tool lenght: 240 [mm] Max. weight of single tool: 3 [Kg] Max. tool diameter: 130 [mm] Tool change time: 3 [sec] Chip to chip time: 8 [sec] Number of cutting hours: 1463 [h] Rated current: 25 [A] Supply voltage: 400 [V] Psdpfozzmmwex Anysrb Machine weight: 3250 [Kg] INCLUDED EQUIPMENT: HEIDENHAIN linear glass scales on the X, Y, and Z axes x1 FRIBOSA Switzerland precision vise x1 RENISHAW TS 440 part probe x1 RENISHAW TT 140 tool probe x3 ISO30 tool holders x1 FEHLMANN GPRPLUS50 toolsetter x1 coolant tank with pumps x1 spindle chiller Various tightening wrenches Axis locking brackets for machine transport Technical and operating manuals Machine visible under power in our premises by appointment. Price on request, loading on truck included. Possibility of shipping Worldwide. The information on this page has been obtained by the best of our ability. Therefore, its accuracy can not be guaranteed. Machine similar to Mikron, Hermle, DMG Mori, Mazak, Hedelius, AXA, Chiron, Matec, Reiden, Lagun, Haas, and Alzmetall machines, as well as milling, drilling and tapping machines, and CNC grinding machines.