Used Auto Strong N-212 for sale (55,710)

Condition: like new (used), Year of construction: 2022, functionality: fully functional, Equipment: documentation/manual, refrigerant dryer, type plate available, Container includes the following contents: - 10ft storage container, new / Color: Anthracite grey - SSC-Strong 37 Vario • Speed-controlled screw compressor • Free air delivery at 8 bar: 6.3 m³/min • Dimensions (LxWxH): 1432 x 1000 x 1480 mm • Weight: 705 kg - 2 compressed air tanks, 500 l each o With AD2000 certification Ndedjxc T Evspfx Aa Rja o Horizontal design - 2 Ecomat 31 condensate drains - 2 sets of fittings - SCC refrigerant dryer DRA480 o ISO 8573-1 Class 4 o Refrigerant: R407C o Capacity: 480 m³ - Pre-filter FIL934-P - Fine filter FIL934-M The compressor has seen very little use and therefore has low operating hours. Upon request, we can read the operating hours and run the compressor for demonstration.

Condition: good (used), Renz Autobind AB 500 HS + KAS-300 Semi-Automatic Spiral Binding Machine Machine in very good condition, ready to operate. Made in Germany. Efficient semi-automatic machine for the production of calendars, notebooks, and other metal spiral-bound products. Fast operation Spiral diameters range from 3/16″ to 1 1/8″ Ndjdpfx Aaszur Efo Rea Working width up to 500 mm Crimping thickness approx. 23 mm Cycle capacity up to 2000 cycles/hour The semi-automatic machine unwinds the spiral from the spool, counts the stitches, cuts the spiral to the pre-set stitch count, and transfers the spiral section to the crimping area. The operator places the pre-perforated calendar on the table. The calendar is automatically transferred to the crimping area by pressing the pedal. The machine then automatically deposits the entire binding onto the outfeed conveyor. The machine includes a Renz KAS-300 hanger feeder, a CB-120HS outfeed conveyor, tools, and documentation. Power supply: 230V + compressed air. Weight: 250kg.

Condition: excellent (used), Year of construction: 2021, We offer the ETL Prüftechnik ATS 400 X8 automatic test system, designed for electrical and safety testing of products in industrial and laboratory environments. The device is used for, among others: • Quality control (QC) • End-of-line production testing • OEM laboratories and testing stations ⸻ Basic data • Model: ATS 400 X8 • Power supply: 230 V / 50–60 Hz / max. 10 A • Year of manufacture: 03/2021 • Manufacturer: ETL Prüftechnik GmbH (Germany) • Condition: very good, well-maintained equipment • Last factory calibration by ETL: 05/2023 • Weight: 38 kg ⸻ Nedpfxeyc H N Ns Aa Roda Equipment / Included in delivery • Main ATS 400 X8 unit with integrated touchscreen display • Windows 10 Pro operating system (OEM) • Complete set of test leads and accessories (as shown in the photos) • Manufacturer’s documentation • Original markings, nameplates, CE certification ⸻ Technical notes • This is a professional test and measurement instrument, not consumer electronics • The equipment is ready for use in a production environment • No signs of tampering; all connectors and interfaces are complete

Condition: good (used), Autobond Mini 105 TPH-RU-SAB-VS Automatic Laminating Machine The most efficient machine on the market from a legendary manufacturer. This advanced machine boasts high performance thanks to an external heating thermostat. Made in Great Britain. Technical specifications: Max sheet size: 1060mm x 1060mm Nedpfozlac Tjx Aa Rsda Min sheet size: 320mm x 285mm Min grammage: 115 gsm Max grammage: 650 gsm Operating temperature: 80-135°C Max operating speed: 120m/min Weight: approx. 4500 kg 380V power supply Additional 8 bar air supply Large-diameter, chrome-plated steel cylinder, filled with water for greater stability. Double-sided laminating Pneumatic clamping, separation, and automatic feeding. Adjustable pressure. High-stack feeding, Heidelberg Speedmaster feed head. Expansion roller for film fixing. Sheet straightening module. Stacker for sheet removal. The machine can operate in pallet-to-pallet or pallet-to-roll configurations. Two independent heating systems for two rollers, and a water-based sheet cooling system via rollers.

Condition: excellent (used), For sale: Professional industrial extraction unit by TEKA, model STRONGMASTER BIA, designed for welding fume extraction and air pollution control. ‼️ VERY LOW HOURS – ONLY 1,550 OPERATING HOURS (this is rare for this type of equipment) ⚙️ Technical specifications: Manufacturer: TEKA (Germany) Model: STRONGMASTER BIA Capacity: 3,000 m³/h Max. negative pressure: 2,500 Pa Motor power: 1.1 kW Power supply: 400V (3PH + N + PE) Frequency: 50 Hz Rated current: 2.5 A Protection class: IP54 Control voltage: 24V Weight: approx. 130 kg 🔧 Equipment: Flexible extraction arm Industrial filter Control panel Operating hours counter Mobile chassis with wheels 🔍 Condition: Used equipment, in good technical condition. Normal signs of use visible. Nodsyz Dilopfx Aa Reda ✅ Low hours – only 1,550h ➡️ Equipment is only lightly used ➡️ Significant potential for further operation

Condition: new, Year of construction: 2024, Hydraulic press brake PBO-3212-N Estun E21 Specifications - Nominal pressure: 1250 kN - Max working length 3200 mm - Throat depth: 320 mm - Max stroke: 120 mm - Daylight: 390 mm - Distance between side frames: 2600 mm - Max backgauge distance: 600 mm - Nominal motor power: 7.5 kW - Length: 3870 mm - Width: 1550 mm - Height: 2400 mm - Weight: 6700.0 kg Tools - Front supports: 2 pcs - Backgauge distance regulation (X-axis): electric motor - Ram control (Y-axis): electric motor - Type of punch holder: AMADA quick-action clamping Njdpfx Asgi Dldea Rsda E21 controller (Mounted on a swivel arm) - Controls X (backgauge) and Y (ram) axes - Allows the creation of up to 40 programmes - Each programme may consist of 25 steps - Intuitive operation through the use of English abbreviations, which are explained during training It is a sophisticated but easy-to-use controller that allows operation in three modes: - Manual - Single automatic - Serial automatic Optional extra - Manual crowning So that you are always sure that the workpiece will have the same angle along its entire length. OCS - Oil Cooling System Oil Cooling System guarantees the stability of the machine's operating parameters even after long, continuous operation. Assistance by a specialist We make sure to stay in constant touch with our Clients. This is why we add a time package of tech support hours for Otinus Professional Assistance to each machine purchased. See and test the machine Join us for a one-of-a-kind demonstration where a qualified Otinus technician will show you the full functionality of the machine. In addition, you will be able to try out how the device will perform against your needs as you can provide technical drawings and sample material. Included in the machine price 2-day training including installation of the machine - 1st day (up to 8 hours) - installation of the machine and learning to use the controller. - 2nd day (up to 8 hours) - independent work on the machine under the supervision of our technician with the possibility of programming specific parts manufactured by the Client. Telephone consultation with a specialist - 7.30 a.m. to 9 p.m. (Mon-Sat) - package of 8 hours to be used within 12 months - Free lending of transport rolls and two lifting jacks for easier positioning of the machine at Clients' facilities. The rollers and jack will be delivered after prior notification (no less than 7 days before delivery of the machine). Terms of cooperation - 24 month warranty - The machine is brand new - Warranty and post-warranty service provided by the seller - The Client is responsible for the machine during unloading and transporting on-site

Condition: like new (used), Morgana Autocreaser 33 automatic creaser The device is in very good condition. A modern device that allows you to create a crease (groove), thanks to which we can bend paper or other materials more easily. Sheet size 330x900mm Ndjdszph Nvopfx Aa Roa Weight: 400gsm programmer Weight: 150kg Manufacturer: Morgana, UK Image Creasing: Yes Creased materials: paper, cardboard, cardboard

Condition: excellent (used), MOSCA RO-M-P2 – automatic PP strapping machine For sale: a high-quality, automatic polypropylene (PP) strapping machine from the renowned German manufacturer, MOSCA. This device is designed for the quick and efficient strapping of cartons, packages, and other products prepared for transport and storage. The machine is ideally suited for use in warehouses, logistics centers, manufacturing companies, online stores, and packaging facilities. Technical specifications: Manufacturer: MOSCA Maschinenfabrik Gerd Mosca GmbH Model: RO-M-P2 Year of manufacture: 2000 Nedpfx Aszkmp Dja Rjda Serial number: 58664 Country of manufacture: Germany Power supply: 230 V Frequency: 50 Hz Power: 0.5 kW Rated current: 2.4 A Control voltage: 24 V DC Equipment: Automatic PP strapping Strap tension adjustment Automatic strap sealing Control panel with indicators Main switch Large stainless steel worktable Mobile design with wheels Robust industrial construction Condition: Used machine. Technically functional. Good visual condition, with normal signs of wear and tear from use. Sold in the exact condition as shown in the photos.

Condition: used, Year of construction: 2010, number of aggregates 2 St. working width 2000-3500 mm work height max. 2450-3200 mm Wintech M9Cb Sealing Machine Automatic sealing system for wooden windows and doors with 2 processing units. For a detailed description, see the PDF document. ----- Manufacturer’s technical description: M9Cb robotic sealing system The machine comprises a robust structure made from aluminium profiles, fitted with motorised conveyor belts on which the window units are transported. The silicone is distributed evenly into the joint by means of two automatically controlled nozzles. The electronic control system, which is in constant communication with the sensor, determines the movement of the guns and the operating parameters. Technical data: Standard Optional Max. window width 2000 mm 3500 mm Max. window height 2450 mm 3200 mm Max. window thickness 160 mm 190 or 250 mm* Max. window weight 150 kg 200 or 400 kg* Loading station 2000 mm 3500 mm Unloading station 2000 mm 3500 mm Choice of silicone: Standard 1 colour 2 or 3 colours Master head 1 2 Sealing of timber panels no yes Formulation adapted to the type of elements no yes Synchronised conveyor belt no yes for heavy loads and/or conveying in both directions Double movable crossbar for flush-mounted hinged window sashes no yes *Please contact us for greater thicknesses or weights Optimisation of the sealing process: The M9Cb robotic sealing system revolutionises the sealing process by injecting exactly the right amount of silicone, thereby preventing unwanted streaks. It enables the glazing beads to be ‘nailed’ invisibly and saves the time required to cover the nail heads. The precision ensures high-quality, uniform sealing, which guarantees optimal watertightness whilst maximising the clarity of the units. With a feed speed of approx. 2 metres per minute, it offers fast and efficient processing on both sides simultaneously (on average 4 minutes per unit). More space available: No more lack of space in the workshop! The M9Cb operates vertically and therefore takes up very little floor space. Leaning against a wall or partition, it frees up the space previously occupied by horizontal sealing tables. In addition, a strategically positioned conveyor belt can also serve as a vertical glazing table, thereby optimising the layout of the work area Automation of sealing: To ensure a seamless seal, it is no longer necessary to juggle the window unit or struggle with fitting seals. Ndjdpfx Aajzmy Ifs Rea The M9Cb automates this laborious process on both sides Time savings: Thanks to the M9Cb, the workflow is no longer one-dimensional. Whilst the machine takes care of sealing the windows and doors, the operator can work on other tasks, e.g. glazing, blocking, packaging... This versatility enables the operator to diversify their activities and thus offers them a more rewarding experience. ----- ----- Price of the above machine on request! -----...

Condition: used, Technical details: drill diameter: 5,,,,40 mm drilling length: 600 mm lip angle: 90-150 ° total power requirement: 4,5 kW weight of the machine ca.: 0,8 t dimensions of the machine ca.: 2-2-2 m CNC programmable according to ISO Point angle 90-140 degrees, disc stroke x 80mm y 80mm grinding wheel 6mm to 150mm ceramic or CBN speed 2500 to 6000 rpm Grinding options - 3 facets 6 surface grinding (Renault patent) - conical surface grinding with cross-section correction / point thinning / cross point. / Type 2/1 Avyac grind / 4 faces gr. Cross for deep drill .... Ndedpfx Aoy Nk H Toa Rea *

Condition: used, mileage: 520,000 km, power: 256 kW (348.06 HP), first registration: 06/1977, fuel type: diesel, number of seats: 32, gearing type: mechanical, color: beige, Year of construction: 1977, Equipment: parking heater, * Setra 212 HM with 32 seats - 6-speed manual transmission - Toilet - Kitchen - Round seating area * Diesel - 12,675 cm³ - 256 kW - 350 hp - Euro 0 - No emissions sticker required - 8 cylinders - Air suspension * 32 seats + 1 driver - Auxiliary heater - Radio - Simple door at the front and rear * Vehicle dimensions: Length: 10,370 mm x Width: 2,500 mm x Height: 3,090 mm * German vehicle - German vehicle registration document - Sold on behalf of a customer * Errors/printing errors and prior sale reserved - immediately available * Please schedule an appointment for viewing and test drive Nsdsyy T N Sspfx Aa Rsda * Contact: Andreas Vogel * ATTENTION - Vehicles are stored off-site - Please inquire about the exact location - ATTENTION

Year of construction: 1998, condition: excellent (used), Kap Saw Reinchardt NC 700 automatic Manufacturer Reinchardt Model / machine type NC 700 Year of production 1998 Machine category Kapła Kapowa Location Gorzów Wlkp. Conditions of delivery OWN RECEIPT Cost of delivery Ndodjd H Hmhspfx Aa Rsa Customer cover Start type to be agreed Description Comments CUTTING SAW FOR CUSTOMIZED DIMENSIONS, ACCURACY UP TO 1MM, NEW CONTROLLER, SAW BLADDER BY HYDRAULIC AGREEMENT

Condition: used, Year of construction: 2012, operating hours: 27,315 h, gearing type: automatic, color: other, Year of manufacture: Apr 2012 Axle 1: left 10 mm right 10 mm Ndodszvax Aspfx Aa Rsa Axle 2: left 12 12 mm right 12 12 mm Axle 3: left mm right mm

Year of construction: 2026, operating hours: 1 h, condition: as good as new (ex-display), functionality: fully functional, machine/vehicle number: S23NEOS06, Exhibition facility Stretch winder ATLANTA NEOS ARYA system for automatic foil blowing and cutting. 99 programs can be saved individually With 1 remote control - optionally more possible Winding height 2150mm Mast height 2050 mm (fits through almost every door) Foil power stretch 120-400% Motorized pre-stretching system with stepless adjustment Adjustable pre-stretching ratio from 120 to 400% via control panel Foil application tension electronically controlled via control unit Fast loading system IEF for easy changing of foil rolls Foil specification Max. outer diameter Ø300mm - height = 500mm - core Ø76mm Automatic foil cutting unit Tension of the film can be saved in 4 steps TECHNICAL DETAILS: two maintenance-free AGM batteries 12 V - 100 Ah connected in series At least 160 pallets per load - loading time: 8 -10 hours High frequency battery charger with LED indicator Wrapping height “machine with MAST (pallet included) 2,150 mm Height query via light button or by entering dimensions on the display Protective bar for emergency stop of the travel drive Emergency stop switch according to CE regulations Acoustic warning signal and warning light when the machine starts Fall protection for the film slide Push button for start & stop Function of the machine according to CE standards Ø 22 mm ADJUSTABLE PARAMETERS ON THE CONTROL PANEL: All function parameters can be set via the display Ndjdpfxeyktv Se Aa Rja - Screen lock program change - Adjustable machine speed around the pallet up to 80 m/min Lifting carriage speed can be adjusted up and down independently of each other - Lifting carriage speed from 1.3 up to 5.4 m/min - Lifting carriage speed down from 1.3 to 5.4 m/min - Number of wraps on the pallet foot (1 - 10 wraps) - Number of wraps on the pallet head (1 - 10 wraps) - Adjustment of pallet wrapping height - Foil application tension foot & head winding / ascent & descent independently adjustable - Foil pre-stretching foot & head wrapping / ascent & descent independently adjustable - Ergonomic height for foil change ADJUSTABLE WRAPPING PROGRAMS ON THE CONTROL PANEL: 99 storable winding programs for SFERA EASY - Cross winding (up/down) - Simple winding (only up or only down) - Wrap cycle with preset start and stop height - Winding to a stored height (switching off the light button for the height) - Wrapping cycle for large pallets - Winding cycle for cover sheet film - Soft start cycle for application of edge protection - Wrap cycle with gain and adjustable number of wraps Soft start to reduce film tears on sharp pallet edges Winding cycle with manual or motorized line formation (optional) Other systems available immediately from the Ludwigsburg warehouse

Condition: new, Year of construction: 2025, Dura fence metal automatic roll forming machine MPF-1 auto Nsdpfxstp H Ers Aa Reda Dura fence metal automatic roll forming machine MPF-1 auto can be efficient solution for companies who decide to increase or start production of metal picket durafence planks. A metal picket fence is a type of profile that you can get by rolling flat metal through the rolling rollers of a machine with further use in the process of metal fences manufacturing and installation. A dura fence (euro picket fence) has an attractive look and can be perfect part of any design without cluttering it up or loading it with unnecessary elements. A dura fence will be an excellent solution for the construction of houses, cottages or any other buildings. Dura fence metal roll forming line MPF-1 is fully automatic and can proceed metal fence planks production process in fully automatic mode. The line consists of following parts Automatic metal decoiler can work with rolls weight up to 1.5 tons and coil width up to 350 mm. Decoiler helps to feed metal into a roll forming machine, so you need to install roll to unwinder shaft, to adjust inner diameter of the roll and put the metal under the compensation mechanism of the machine. After you have to take it to roll forming machine. As an option, we can also make a line and equip it with a manual metal unwinder or install a line without it at all. The rollformer part of the machine, consisting of rolling rollers of various diameters and configurations to roll metal and form the required profile. Guillotine shear for cutting final products of the machine. The guillotine works in automatic mode, giving the opportunity to cut fences with necessary length and quantity. Line automation system consist of a manual control panel, an automatic control panel and a stand with a display. The manual control panel allows you to set up the machine in manual mode and check it before automatic operation. The automatic control panel is used when the line is operating in automatic mode, allowing you to set the quantity and length of forming products and program their cutting with the line. Thus, using dura fence metal line MPF-1 auto, you can get a full automatic solution for the production of a metal fence profile, applying minimum efforts to production and receiving high-quality products with sizes and numbers you need. Specification: The material thickness maximum (mm) 0.55 Engine power (kW) 1.5+1.1+2.2 Rolling speed (m/min) 10-15

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 3120x1100x1600 mm Weight 2000 kg Ndodpfx Aasvz Hano Rea Total power requirement 6,4 kw

Condition: used, For inquiries regarding the attachment, please contact Mr. Herden (at tel. number). Greentec HS 212 Branch Cutter / incl. MS08 adapter plate / NEW unit / in stock & immediately available Price: €6,290.00 net / €7,485.10 gross - Working width: 2,100 mm - Cuts per minute: 250 - 450 - Max. branch diameter: 60 mm - Oil flow: 50 l/min - Pressure: 190 bar - Working speed: 5 km/h - Weight: 132 kg Optional: Flow divider with pressure relief valve - freely adjustable (50-90 l/min at 190 bar) = €660.00 net Description: - Clean and smooth cut of small branches and larger limbs up to max. 60 mm diameter - Sturdy frame beam made of high-strength steel - Lightweight construction - Low weight and flat housing for optimal visibility - HIGH-POWER blade drive via planetary gearbox with constant torque during direction changes - 100% linear blade movement thanks to a cast iron constant power motor - Max. 450 cuts per minute - PRO CUT blade (Made in Germany) - Fine-toothed double-cut blades (ground on both sides) increase both the surface quality and the working capacity - Special blade guide made of wear-resistant plastic ensures smooth operation and long service life - Blade fingers with branch-saving function = remaining branches are not damaged - Long service life thanks to hardened and galvanized material - Easy and quick blade change - Sliding skid prevents damage from ground contact - Minimal wear and low maintenance - High working speed up to 5 km/h - Variable mounting position of the blade bar - Required hydraulic connections: 1x DW (1x supply + 1x return) Many other adapter plates (MS01 / MS03 / MS08 / CW05 / CW10 / CW20 / OQ65 / OQ70/55 / etc...) in stock and immediately available. In our warehouse, we have a very large selection of various Greentec products that are immediately available! Mr. Herden (tel. number) will be happy to assist you. On request, we will also be happy to provide you with a financing offer. We are an official Westtech sales and service partner. We are an official OilQuick sales and service partner. We are an official Holp sales and service partner. We are an official Magni telehandler sales and service partner. We are an official DMS sales and service partner. We are an official Gierking GMT sales and service partner. Njdpfx Aozk S Tbsa Rjda We are an official Weber MT sales and service partner. We are an official Seppi M. sales and service partner. We are an official JCB construction machinery sales and service partner. We are an official Mercedes-Benz sales and service partner. We are an official Iveco sales and service partner. In addition, with 800 used vehicles, we are one of the largest commercial vehicle dealers in Germany. We will supply you with the complete Seppi M. range! Errors and prior sale excepted! = Further information = New: Yes Part suitable for: Application forestry Please contact Marius Herden for more information.

Condition: excellent (used), Karmetal OSA 300 x 370 PLC Controlled Fully Automatic Bandsaw Ndjdpfx Aezuxugoa Rea Balde Speeds Variable 25 – 90m/min (Invereter) Round Section 300mm Rectangle Section 280 x 370mm Sqaure Section 280mm For sale with *Jet Machinery Ltd* Jet Machinery Stock No: #270341 Machine Serial Number: 21482 Cost: £14,950.00 + VAT Whilst every effort has been made to ensure that the above information is accurate it is not guaranteed. We advise prospective purchasers to check any vital details. Health and Safety At Work Act 1974: It is not reasonably practical for ourselves as suppliers to ensure that for your application the goods comply with requirements of the Act with respect to guarding etc. Prospective purchasers should ensure that a guarding specialist inspect the goods prior to use.

Condition: new, Year of construction: 2025, Sewing module to be added behind "large FILLINGmachines". To close large paper bags with an additional strip of paper for a stronger seam. Inclusive 2.300mm roller belt. Nsdpfxov Nm Ems Aa Rsda Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from stock. In addition, we have very short delivery times from approx. 3 weeks for customized machines. Deviations from the sample photo are possible. - All machines are available with full warranty.

Condition: excellent (used), functionality: fully functional, Year of construction: 2019, operating hours: 3,817 h, load capacity: 1,200 kg, lifting height: 4,200 mm, free lift: 1,600 mm, load center: 600 mm, fuel type: electric, mast type: triplex, construction height: 1,850 mm, power: 1.6 kW (2.18 HP), gearing type: automatic, battery manufacturer: Jungheinrich, battery model: 24v 3PzS375, battery capacity: 375 Ah, remaining battery capacity: 71 %, battery voltage: 24 V, battery weight: 300 kg, fork carriage width: 560 mm, fork length: 1,150 mm, fork width: 180 mm, fork thickness: 50 mm, overall weight: 1,133 kg, empty load weight: 860 kg, total height: 1,850 mm, color: yellow, Equipment: pallet forks, Jungheinrich EJC 212 Electric High-Lift Pallet Truck. Load capacity: 1,200 kg Fork length: 1,150 mm (standard) Lifting height: 4,200 mm The machine is in good condition, no pending repairs, hydraulics leak-free. Battery serviced and capacity-tested by professional service. Technical specifications: Manufacturer: Jungheinrich Model: EJC 212 Operating hours: 3,817 Year of manufacture: 2019 Load capacity: 1,200 kg Overall height: 1,850 mm Free lift: yes Fork length: 1,150 mm Lifting height: 4,200 mm Triplex mast Battery: 71% remaining capacity, wet cell battery C5 discharge test: 269 Ah at full load for 3:36 h Approx. 7h operating time Includes document holder and integrated charger A higher-performance battery can be installed at extra cost. Nsdpfx Ajxztbuja Rsda Net export possible.

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 1500x700x1600 mm Weight 900 kg Ndjdpfxovz Hgbs Aa Rsa Total power requirement 0 kw

Condition: like new (used), Year of construction: 2024, functionality: fully functional, machine/vehicle number: M134377I2WA, turning diameter: 300 mm, spindle speed (max.): 5,000 rpm, rotational speed (max.): 2,500 rpm, workpiece weight (max.): 30 kg, total height: 3,300 mm, total length: 2,200 mm, total width: 3,400 mm, overall weight: 9,600 kg, Equipment: documentation/manual, rotational speed infinitely variable, Fully automated Hwacheon Hi-TECH CNC lathe with WEKAL portal system including robot Base: Hwacheon Hi-TECH 450BL YSMC (Siemens) Year of manufacture 2024 | Like new | Manufacturer's warranty until 03/26/2027 | Immediately available Highlights ✓ Year of manufacture 2024 ✓ Automatic door drive ✓ Like new condition ✓ Robot interface ✓ Fully functional ✓ Travel monitoring ✓ Manufacturer's warranty until 03/26/2027 ✓ High-pressure coolant system ✓ Siemens SINUMERIK with ShopTurn ✓ Oil/emulsion mist filter ✓ DXF reader integrated ✓ Fully automatic WEKAL portal system ✓ Y-axis ±60 mm ✓ WEKAL WRB roller conveyor ✓ Counter spindle 4,000 rpm ✓ Robot gripper module ✓ Driven tools up to 5,000 rpm ✓ Complete documentation ✓ Torque upgrade ✓ Ongoing maintenance with records Complete automated production cell The system is designed for the automated machining of round stock. Workpiece range: • Diameter 50–300 mm • Workpiece weight up to 30 kg The WEKAL automation system handles the loading and unloading of workpieces and enables economical operation with minimal manual intervention. WEKAL WPA portal system • 2-axis portal system • X-beam 7,000 mm • X-travel approx. 5,500 mm • Z-travel approx. 1,800 mm • Conveyor length WRB roller conveyor 10,000 mm • 20 workpiece carriers • Robot gripper module with quick-change system Machine equipment • Siemens ShopTurn • ProfiNet • Touchscreen • DXF reader • Network drive management • Geared spindle 22/18.5 kW • 2,500 rpm • Y-axis ±60 mm • Counter spindle • Driven tools 5,000 rpm • Torque upgrade • High-pressure cooling • Oil mist extraction • Chuck flushing • Chuck blow-out • Travel monitoring • Automatic door drive • Robot interface Documentation and condition The system is in like-new and fully functional condition. • Complete documentation available • Ongoing maintenance including records • Manufacturer's warranty until 03/26/2027 • Available in the short term Nsdpfx Aajzhltcj Rsda The system can be inspected while powered on. Training and instruction are possible. Programming and setup of your components are possible. Sale ex works. Buyer organizes disassembly, loading, and transport.

Condition: new, * IMMEDIATE AVAILABILITY * Latest BJT model, upgradeable with numerous options: including hydraulic tilting function, additional ramps, and more. Technical Data: • Brand: Brian James • Model: Race Sport MY2025 • Vehicle type: Car transporter • Vehicle condition: New vehicle Nsdsx Tcfcjpfx Aa Rjda • First registration: Not yet registered • TÜV/Inspection: 2 years from first registration • Internal dimensions (LxWxH): 550 x 210 x 199 cm • External dimensions (LxWxH): 715 x 250 x 253 cm • Loading height (floor): 48 cm • Permissible total weight: 3,500 kg • Unladen weight: 1,445 kg • Payload: 2,055 kg • Chassis: Low loader (wheels positioned beside body) • Tyres: 155/70R12 • Suspension: ALKO rubber torsion axle • Jockey wheel: Yes • 100 km/h approval: Optional, retrofit possible DESCRIPTION • Black superstructure made from high-quality, glass fibre-reinforced plastic. Lightweight yet extremely robust • Full-length daylight roof • Manoeuvring handles front and rear • Dual front hatch doors facilitate lashing of the front wheels • Large, lockable side flaps on both left and right for easy access • Full-height, full-width locking rear loading ramp with internal rotary-bar lock • Rollers at the rear for easy loading • Internal height: 1990 mm; rear entry height: 1880 mm • Perforated steel lashing floor offers superior slip resistance and is extremely wear-resistant, even under the toughest working conditions • Numerous lashing points and a highly durable floor allow for flexible securing options and optimal grip • Closed multiplex floor panel • Electric winch, 12V with cabled remote control. 2,250 kg pulling force, with roller fairlead, winch cable, and snap hook. Powered by on-board battery • Very robust welded steel frame • Frame completely hot-dip galvanized • Spare wheel with bracket mounted • Reinforced, heavy-duty V-drawbar • AL-KO overrunning device and parking brake • Automatic reversing mechanism • Cast steel coupling head with integrated high-security AL-KO lock • Plastic mudguards • 13-pin plug • Reversing lights • Large-format safety lighting • Integrated rear fog lamp • Multiple marker lights, front, side, and rear • Heavy-duty jockey wheel • 5-year chassis warranty Accessories retrofit available—please inquire! New vehicle with warranty and TÜV. - Financing or leasing available - Nationwide delivery possible - All prices include VAT - Vehicle registration document can be sent in advance, or export/temporary registration plates (Germany) can be provided - Export plates including customs declaration available Descriptions and images are copyright protected!! Trailer Center BAUMANN GmbH Dekkers Waide 17 46419 Isselburg Over 1,200 trailers available for immediate delivery! We have been an authorized dealer and service workshop for over 30 years for Brian James / Blyss / Debon / Humbaur / Hapert / Unsinn / Cheval Liberte / Koch / Lorries / Martz / Stedele / TPV / Tohaco / Vezeko / Variant / Vlemmix - Errors, omissions, and prior sale excepted -

Condition: excellent (used), Year of construction: 2015, machine/vehicle number: 03814V2200, functionality: fully functional, operating hours: 2,416 h, input voltage: 380 V, type of input current: three-phase, travel distance X-axis: 2,200 mm, travel distance Y-axis: 1,200 mm, travel distance Z-axis: 280 mm, number of slots in tool magazine: 1, total height: 2,400 mm, total length: 3,000 mm, total width: 1,200 mm, overall weight: 1,100 kg, table length: 2,200 mm, table width: 280 mm, coolant supply: 3 bar, feed length X-axis: 2,200 mm, feed length Y-axis: 1,200 mm, feed length Z-axis: 280 mm, feed rate X-axis: 7 m/min, feed rate Y-axis: 7 m/min, feed rate Z-axis: 6 m/min, spindle motor power: 4,500 W, number of spindles: 1, rapid traverse Z-axis: 6 m/min, rapid traverse X-axis: 7 m/min, rapid traverse Y-axis: 7 m/min, rotational speed (max.): 18,000 rpm, rotational speed (min.): 1,000 rpm, spindle speed (max.): 18,000 rpm, spindle speed (min.): 1,000 rpm, table height: 1,200 mm, Equipment: rotational speed infinitely variable, NUMERICALLY CONTROLLED PANTOGRAPH WITH VERTICAL PLANE MODEL "VERTICAL 2200 OPEN" WITH 3 INTERPOLATED AXES FOR WORKING MARBLE AND GRANITE basic assembly: - range: x-axis=2200 mm. y-axis=1200 mm. z-axis=300 mm; - work surface L. 2500 x H. 1250 mm; - heavy carpentry-made structure in processed and painted steel; - Side openings with loops, both on the left and on the right, for processing oversized blocks with support rolls; - slabs and carter support in inox steel; - highly deep workbench made with extruded aluminium profile ; Ndjdpfx Aaoygxc Aj Rsa - slab locking with n°2 clamps with mechanical blocking device; - three-phase electro spindle hp 5 1/2 gas connection with perforated shaft and rotating joint for water passage for internal and external tool refrigeration, and inverter for variation to maximum 18000 r.p.m .; - openable polycarbonate protection for electro-mandrel, with safety micro; - axes movement by means of runners and sliding blocks of balls recircle; - dust tents for total protection of all moving parts; - water cooling tool system with centralized drain, including pump, decanting tanks and locking electrovalve; - electronic panel with console comprising numeric control, pc and monitor. Windows software included ARTCAM INSIGNA: - carrying out of reliefed and engraved writing, using all "true Type" fonts; - cad for carrying out drillings, cuts, engravings, millings and inlays; - import of most common types of files as dxf and dwg to create writings, drawings and stamps, reliefed and engraved logos, showr trays, sinks, arcs and portals; - automatic drilling for inserting bronze letters; - carrying out single and multiple sculptures in high and bas-relief; automatic switch off; 3D PLAN LASER laser copyng system to import manufactured products and tree-dimansional figures (bas and hight - relief) with interface and software for required dimensions

Condition: used, first registration: 02/1990, Year of construction: 1990, SPIERINGS Lattice Boom Tower Crane Motor vehicle: • Engine power: 222 kW / 305 HP / Displacement: 8,250 cm³ • Vehicle dimensions: 12,395 x 2,600 x 4,000 mm • Operating weight: 35,000 kg • GVW: 36,000 kg including 7,080 ballast weight • Tires: 445/65 R22.5 • 3 axles • 1st and 3rd axles steered • Rotating beacons Crane: • Max. reach: 30.4 m • Max. load capacity: 5,000 kg at 9.3 m reach • Drive type: hydraulic, hydraulic pumps electrically driven by external power or generator operation • Control type: electric Actuated proportional and control valves • Max. corner load: 204 kN • Max. speed: 85 km/h • Can only be moved from the undercarriage! Lifting gear: • Motor: Hydraulic variable displacement motor • Drive group: 1Am • Displacement: 20..55 cm³ • Max. feed pressure: 260 bar • Gearbox: Planetary gear, i=27 • Drum diameter: 375 mm • Max. rope pulling force: 25 kN • Corresponding rope speed: 30 m/min • Holding brake: Spring-loaded multi-disk brake Travel trolley: • Motor: Hydraulic Fixed displacement motor • Drive group: 1Am • Displacement: 16 cm³ • Max. feed pressure: 265 bar • Gearbox: Planetary gear, i=10.4 • Drum diameter: 200 mm • Max. rope pulling force: 6 kN • Max. speed: 50 m/min • With limit switch • Holding brake: Spring-loaded multi-disk brake Slewing gear: • Motor: Hydraulic fixed displacement motor • Displacement: 16 cm³ • Max. feed pressure: 300 bar • Gearbox: Planetary gear, i=160 • Max. uppercarriage speed: 1.3 rpm • Slewing brake: Hydraulic brake valve • Holding brake: Spring-loaded multi-disk brake Boom folding winch: • Drive group: 1Em • Motor: Hydraulic Fixed displacement motor • Displacement: 16 cm³ • Max. feed pressure: 220 bar • Gearbox: Planetary gear, i=92 • Drum diameter: 200 mm • Max. rope pulling force: 38 kN • Max. speed: 18 m/min • Holding brake: Spring-loaded multi-disk brake • With limit switch Load/load moment limiter: • Pressure switch on the hoist motor • Mechanical switch activated by bending the tower bogie Tower: • Working height: 20.8 m • Outer tower: Length 9.9 m, inner tower: 11 m Boom: • Crane boom in lattice construction; can be positioned horizontally or at a 30° incline • 1st boom section: Length 11 m / 2nd boom section: 11.1 m / 3rd boom section: 7.8 m - German machine! - Ready for use! Subject to errors and prior sale! Nodpowmpczjfx Aa Roda = Further information = Purpose: Construction Upper arm length: 30.4 m