Used Automatica Tenon Spray for sale (2,172)

Year of construction: 2020, condition: new, Use of one photocell Using one photocell in the space of workpiece allows you to measure the length of the workpiece and, consequently, gives you the opportunity to turn on the guns when the item is in range, and to switch off the gun immediately after the workpiece is finished. The photocell is included in the standard equipment.Identification of details using special tags. A plate with identification holes is placed over the suspension. Based on this, the PLC controller in conjunction with the photocell recognizes the painted detail, turns on and off the guns in a timely manner - thus braking the energy and powder coating. Vertical detection of the detail of the workpiece. The use of light gates with detectors horizontally allows the PLC to analyze the vertical shape of the workpiece. Application of light gates with multiple sensors horizontally and vertically. This solution allows precise measurement of the dimensions of the workpiece, which makes it possible also to manipulate the manipulators. Benefits of using gates and photocells The benefits of using photocells or light gates are primarily energy and powder savings. Eliminate painting of a zone in which there is no detail. With the use of light gates, precise control of the guns. Our lines can be optionally equipped with photocells, or light gates Nlodpfxjfy T Arj Akueb Using one photocell in the workpiece space allows you to measure the length of the workpiece and, consequently, gives you the ability to turn on guns when the item appears in their range, and turn off the gun immediately after the workpiece is finished.Identification of details using special tags. A plate with identification holes is placed over the suspension. Based on this, the PLC controller in conjunction with the photocell recognizes the painted detail, turns on and off the guns in a timely manner - thus saving the energy and powder.The use of light gates with detectors horizontally allows the PLC to analyze the vertical shape of the workpiece. The PLC counts the time in which the detail will appear in the gun space - allowing guns to be selectively switched on or off.Using of light gates with multiple sensors horizontally and vertically This solution allows precise measurement of the dimensions of the workpiece, which makes it possible also to adjusting the manipulators.The benefits of using photocells or light gates are primarily powder and energy savings Eliminate painting of a zone in which there is no detail With the use of light gates, precise control of the guns The PLC counts the time at which the detail should appear in the gun space - allowing guns to be selectively switched on or off.

Condition: good (used), KÖHLER Corrosion Test System HK-400 Manufacturer: KÖHLER Type: presumed HK-400 Control System: ADWEST KÖHLER PC102 Marking: SSK_Köhler_0400-01 PN: 1356 For sale is a KÖHLER corrosion test system suitable for salt spray, condensation, and corrosion tests in industry, research, development, and quality assurance. The unit is designed for testing components, coatings, metal parts, and technical assemblies under corrosive environmental conditions. Visually, the system corresponds to a KÖHLER HK-400 model for salt spray and condensation testing. Technical specifications: Test chamber volume: approx. 400 liters Internal dimensions: approx. 1020 × 750 × 500 mm External dimensions: approx. 1970 × 1050 × 600 mm Temperature range: ambient +10 °C to approx. +55 °C Voltage: 220 V / 50 Hz Equipment/features: ADWEST KÖHLER PC102 control system Digital display unit Stainless steel test chamber Viewing window in the door Multiple test grids / shelves Integrated pressure gauges Connections for test media supply Industrial-grade construction Possible test procedures: Salt spray testing Nledey N R Tajpfx Akusb Condensation water testing Kesternich corrosion testing Corrosion testing on coatings and metal parts Automotive and industrial test applications Condition: Used equipment with signs of age and use. Visual condition as shown in the pictures. Important note: The original manufacturer's nameplate was not present on the unit. The technical data was compiled based on existing markings, pictures, and comparable KÖHLER HK-400 manufacturer information. Scope of delivery: System as shown All included items according to the pictures. Other notes: Inspection by appointment is possible. Loading can be arranged. Commercial sale – Sale without warranty. (Specifications subject to change and errors excepted.)

Condition: used, all stainless steel dimensions: ± 5.000 x 2.200 x 2.700 mm drum diameter: 1.300 mm net drum length 4.200 mm adjustable inclination angle easy to clean inlet height: ± 1.700 mm (adjustable if necessary) discharge height: ± 1.000 mm Nsdpfxoy Nax Ee Akujlb power 3kW 400V, 50Hz 4 spray pipes Provided for extraction

Condition: excellent (used), CATALOG NUMBER: 6607 TECHNICAL DATA Circular saw: - Maximum blade diameter: 350mm - Spindle: 30mm - Lockable spindle - Blade adjustable front/back, up/down - Blade guard - Motor: 1.1kW - Extraction port diameter: 80mm Spindle moulder: Tenoning spindle: - Spindle diameter: 40mm - Spindle working height: 140mm - Lockable spindle - Maximum cutter head diameter: 350mm - 2 spindle speeds: 3000 / 4500 rpm Nlsdpjy R Dl Eefx Akusb - Motor: 5.5kW - Brake - Side sliding table – manual feed - Table dimensions (L/W): 1180x600mm - Mitre fence - 2 pneumatic clamps - Extraction port diameter: 120mm - Overall dimensions (L/W/H): 2600 (for shipment 2000) /1600/1450mm - Weight: 735kg – Very good condition – Used tenoning machine Net price: 13,900 PLN Net price: 3,300 euros depending on exchange rate 4.2 euro (Prices may vary in case of significant fluctuations)

Condition: excellent (used), Catalogue number: 7759 TECHNICAL DATA Circular saw: - Max blade diameter: 350mm - Spindle: 30mm - Blade adjustable front/back, up/down, angle - Pneumatic movement of the saw unit front/back - Blade guard - Motor: 2.2kW I and II milling spindles: - Tenoning spindle: - Spindle diameter: 40mm - Spindle working height: 150mm - Spindle lock Nlodpsy Ry H Ssfx Akueb - Pneumatic movement of units front/back - Manual up/down adjustment - Max cutter diameter: 300mm - Motor approx. 7.5kW - Side sliding table – manual traverse - Table dimensions (L/W): 1000x380mm - Angle fence - Pneumatic workpiece clamp - Dimensions (L/W/H): 2600/3200 (for shipping 2200)/1540mm - Weight: 1450kg ADVANTAGES – German manufacture – 3-spindle machine – Not repainted – Very good condition – Used tenoner Net price: 13,900 PLN Net price: 3,300 EUR Net price calculated at 4.2 PLN/EUR (In the case of significant exchange rate fluctuations, the price may change)

Condition: excellent (used), Year of construction: 2008, For sale is a salt spray chamber designed for straightforward testing of the corrosion resistance of metal parts and coated surfaces. Within the enclosed chamber, components are exposed to a fine salt mist to reveal corrosion under realistic conditions. The system is clearly arranged and suitable even for users without specialized knowledge. The salt spray chamber is fully functional (still in operation) and in well-maintained condition. Key specifications can be found in the attached images. Nlsdpfxsx Uz Hhj Akueb

Condition: excellent (used), CATALOG NUMBER 6024 TECHNICAL DATA - Main motor: 2.9kW - Spindle motor: 0.75kW - Carriage feed motor: 0.75kW - Power supply: 380V - Dimensions (L/W/H): 1600x1100x1200mm - Weight: 891kg Machine equipped with: – 2 tables measuring 300x340mm – Pneumatic clamps – Tables adjustable in two angular planes – Capability for producing longitudinal and round tenons on the tables – Mechanically adjustable table speed and spindle rotation speed – Tables adjustable up/down Nledpfx Aksy Rr Dijujb – Tenon width adjustment Net price: 16,900 PLN Net price: 4,020 EUR Net price calculated at an exchange rate of 4.2 PLN/EUR (In case of major exchange rate fluctuations, the price may change)

Condition: excellent (used), CATALOG NUMBER: 6969 TECHNICAL DATA Circular saw: Nlsdpfx Asy Rrxmskueb - Max saw blade diameter: 300mm - Spindle: 30mm - Max cutting height: 60mm - Saw blade adjustable front/back - Motor: 2.4kW Milling machine: Tenoning spindle: - Spindle diameter: 40mm - Spindle working height: 190mm - Lockable spindle - Max cutter diameter: 360mm - Motor: 7.5kW - 2 spindle speed options - Material hold-down - Adjustable side carriage (up/down, front/back) - Angle stop - Pull-out table support - Manual carriage feed - Extraction port diameters: 80mm, 160mm - Dimensions (L/W/H): 1910x1960x1800mm, Weight: 830kg – Polish production – DTR (Technical Documentation) included – Upper control panel – Used tenoning machine, in very good condition Net price: 13,900 PLN Net price: 3,300 EUR Net price calculated according to 4.2 PLN/EUR conversion rate (In the event of substantial exchange rate fluctuations, the price may be subject to change)

Condition: excellent (used), Airless spraying unit Brand: GRAO Nledey I T Hajpfx Akujb Model: H 32 Hose length: 15 meters

Condition: new, Year of construction: 2026, functionality: fully functional, total length: 5,000 mm, total width: 3,500 mm, total height: 2,950 mm, inner dimension height: 2,650 mm, inner dimension length: 4,900 mm, inner dimension width: 3,400 mm, Equipment: cabin, Automotive Spray Booth The automotive spray booth is a fundamental device in paint repair technology. It enables painting operations to be carried out in safe and comfortable conditions while minimizing the negative impact on the surrounding environment and the workspace. Specifications: - External dimensions: 5000 (+ air handling unit 1350 × 2900 mm) × 3500 × 2950 mm - Entrance door: 3000 × 2600 mm (three-wing design) - Service door: 700 × 2000 mm - Structure: made of steel sheets - Heat exchanger: standard steel - Panels: steel panels with mineral wool insulation in the walls Cabin Wall Structure: - Thickness: 50 mm - Insulation: EPS polystyrene - Color: white Cabin Base: - Cabin mounted directly on floor/concrete surface Double Ceiling: Nodpfx Ajxnpczekuolb - External ceiling paneling - Full-surface plenum chamber for air supply Air Exchange System: - Supply system: - Jet turbine 4 kW – 2 units - Airflow capacity: 26,000 m³/h - Airflow system: - Jet turbine 5.5 kW – 1 unit - Airflow capacity: 18,000 m³/h Lighting: - 8 side-mounted lamps - Ceiling lighting: 24 LED tubes Air Heating System: - Single-stage oil burner Riello model 40 G20 - Burner control: manual - Heating time: 8–15 minutes Filtration System: - Double-layer filtration structure - High-capacity air purification system with filtration efficiency up to 99%

Condition: new, Year of construction: 2026, The illustrative photos show the realizations for the customer of the 4x7 cabin The offer applies only to the painting booth without the preparation area (possibility to purchase a preparation zone at the customer's request) Nljdpsr Ha Ehefx Akujb - External dimensions: 7000x4000x3500 mm - Internal dimensions: 6900x3900x2650 mm - Entrance gate: 3000x2600 mm (three wings) - Service door: 640x1800 mm - Construction: high-grade steel - Heat exchanger: high-grade steel - Panels: filled with mineral wool - Total power: 16 kW - Floor fully grated - Air supply system: Jet turbine 4.0kW - 2 pieces - Exhaust system: Stream turbine 5.5kW - 1 piece - Ceiling lights: Coffers with LED fluorescent lamps 32pcs. - Side lights: LED panel 120x30cm - 8 pcs. Power: 48W - one piece 1000 lumens - Burner Riello 40 G20 95-213 KW - The cabin is available in different colors

Condition: new, Year of construction: 2026, A two-zone container divided into a paint shop and a preparation zone -External dimensions: 6058x2438x2591 mm -Internal dimensions: 5538x2170x2485 mm - Sea container: 20DV - Door: integrated into the cabin door - Windows: with metal protective mesh - Lighting: 4 led lamps -No assembly required - ready to go - Paint booth wall - fully barred Steering - Automatic from the central block located outside; Power - 380V Supply: Eo3il2moj -Fan - 3 Kw - Flow velocity - 0.7 m/s Nljdpfx Aksnbd Rrsusb -Air flow: 9500 m3/h -Recirculation - closed circuit Heating: -Riello 40G20 oil burner -Heating time 10 -15 min dkm3db -Max temperature 800°C Filters - preliminary, paint-stop, cardboard, carbon Security: -Emergency stop -Pressure lock on the door -Temperature monitoring system -Error indication Equipment: -16A socket -Air preparation team - Pneumatic retractor

Condition: new, Year of construction: 2026, A two-zone container divided into a paint shop and a preparation zone -External dimensions: 6058x2438x2591 mm -Internal dimensions: 5538x2170x2485 mm - Sea container: 20DV - Door: integrated into the cabin door - Windows: with metal protective mesh - Lighting: 4 led lamps -No assembly required - ready to go Steering - Automatic from the central block located outside; Power - 380V Supply: Eo3il2moj -Fan - 3 Kw - Flow velocity - 0.7 m/s -Air flow: 9500 m3/h -Recirculation - closed circuit Heating: -Riello 40G20 oil burner -Heating time 10 -15 min -Max temperature 800°C Filters - preliminary, paint-stop, cardboard, carbon Security: -Emergency stop -Pressure lock on the door -Temperature monitoring system -Error indication Nodpfx Aonbd Nbokuolb Equipment: -16A socket -Air preparation team - Pneumatic retractor

Condition: new, Year of construction: 2026, - External dimensions: 7200x5200x3800 mm - Internal dimensions: 7100x5100x3100 mm - Entrance gate: 4000x3100 mm (four wings) Njdpfem Tv I Ajx Akuolb - Service door: 640x1800 mm - Construction: high-grade steel - Heat exchanger: high-grade steel - Panels: filled with mineral wool - Total power: 21kW - Seating: inside/outside (after prior roofing of the cabin by the customer on his own) - Floor fully grated - Air supply system: Jet turbine 5.5kW - 2 pieces - Exhaust system: Jet turbine 7.5kW - 1 piece - Ceiling lights: Coffers with LED fluorescent lamps 32pcs. - Side lights: LED panel 120x30cm - 12 pcs. Power: 48W - one piece 1000 lumens - Burner Riello RG5S 160-310 kW - The cabin is available in different colors

Condition: new, Year of construction: 2026, functionality: fully functional, total height: 5,850 mm, total length: 12,125 mm, total width: 5,150 mm, overall weight: 8,000 kg, warranty duration: 12 months, inner dimension height: 5,000 mm, inner dimension length: 12,000 mm, inner dimension width: 5,000 mm, Equipment: cabin, lighting, PAINT BOOTH 12x5x5M EZ Series Model: - LED ceiling lighting - LED side lighting - RIELLO oil burner - Four fans, including: ‎ ㅤ- 2x supply fans ‎ ㅤ- 2x exhaust fans TECHNICAL PARAMETERS: - External dimensions: 12125x5150x5850 mm - Internal dimensions: 12000x5000x5000 mm - Entrance doors: 4000x4800 mm (2 units, four leaves, reinforced hinges) - An additional BOX 1650 mm x 8000 mm should be included in dimensions – can be placed on either the right or left side. - Structure: galvanized steel frame - Heat exchanger: high-grade stainless steel - Panels: filled with mineral wool insulation - Drive-on ramps – 2 units - Fully grated floor The reinforced frame construction prevents vibration and the air surge effect from the main supply duct. Double Roof Design: - Upper outer layer - Inner truss structure with V600 ceiling filter Air Circulation System: - Supply system: Jet turbine 7.5 kW – 2 units - Exhaust system: Jet turbine 7.5 kW – 2 units Air Filtration System: - Pre-filter collects particles larger than 10 μm - Ceiling filter collects particles larger than 5 μm - Floor filter: Paint Stop - Carbon filter Lighting: - Ceiling lights: 52 LED tubes (14 angled fixtures with 4 tubes each) Nledsxm U Exepfx Akueb - Side lighting: 26 LED panels integrated into the right, left, and rear walls Burner: Riello – 2 units, oil model 40 G20, approx. 200,000 Kcal/h - Heat exchanger: high-quality stainless steel - Heating time: 8–15 min (max. 80°C) Optional Features: - Roof-mounted boxes - Insulated roof - Pass-through doors - Water curtain - Color according to RAL palette - Explosion-proof (EX) version available

Condition: new, Year of construction: 2026, -External dimensions: 6058x2438x2591 mm -Internal dimensions: 5538x2170x2485 mm - Sea container: 20DV - Door: integrated into the cabin door - Windows: with metal protective mesh - Lighting: 2 LED panels -No assembly required - ready to go Steering - Automatic from the central block located outside; Power - 400V Supply: -Fan - 3 Kw - Flow velocity - 0.7 m/s Nsdpfjnbd Ilsx Akuolb -Air flow: 9500 m3/h -Recirculation - closed circuit Heating - heating supply 12kW Filters - preliminary, cardboard, carbon Security: -Emergency stop -Pressure lock on the door Equipment: -16A socket -Air preparation team - Pneumatic retractor

Condition: new, Year of construction: 2026, - External dimensions: 8125x4650x4600 mm - Internal dimensions: 8000x4500x3800 mm - Entrance gate: 4000x3800 mm (four wings) - Service door: 640x1800 mm - Construction: high-grade steel - Heat exchanger: high-grade steel - Panels: filled with mineral wool - Total power: 22kW - Seating: inside/outside (after prior roofing of the cabin by the customer on his own) - Floor fully grated - Air supply system: Jet turbine 5.5kW - 2 pieces - Exhaust system: Jet turbine 7.5kW - 1 piece - Ceiling lights: Coffers with LED fluorescent lamps 36pcs. Nodpfxonbdlbe Akuelb - Side lights: LED panel 120x30cm - 12 pcs. Power: 48W - one piece 1000 lumens - Burner Riello RG5S 160-310 kW - The cabin is available in different colors

Year of construction: 2026, operating hours: 1 h, condition: as good as new (ex-display), Parts Cleaning System / Spray Cleaning System Type CM13 2-Tank (Washing + Rinsing) including air knife blow-off Basket Diameter: 1,300 mm (octagonal) Max. load capacity: 1,000 kg Nedpfx Akjv Tm Ayouelb Basket is loaded and unloaded by the operator using a transfer cart (detachable/mobile) positioned in front of the machine. Useful height: 800 mm Wash tank: Volume: 430 liters, Spray pressure: 6.0 bar Rinse tank: Volume: 280 liters, Spray pressure: 4.0 bar Total connected load: approx. 52 kW Control: Siemens S7-1200 with KTP700 touch panel Including the following features: + automatic water refill for both tanks + automatic chemical dosing 1-10% (Dosatron) + special spray system (can be optionally activated) for small components (= E-spray system) + side channel blower with height-adjustable air knife system (blow-off drying) + steam extraction including condensate return + weekly timer for electric heating + pre-configured for retrofitting an oil separator + media filtration via bag filter (manufacturer Eaton, Topline) in both circuits (washing and rinsing) + external cladding with stainless steel sheet + complete system fully insulated + tanks separated into two modules; fully insulated (different temperatures possible) + removable filter baskets in the return flow + stainless steel circulation pumps incl. mechanical seal and soft starter The system is exhibited at the Glogar Technology Center and is used exclusively for washing trials.

Condition: new, Year of construction: 2023, aking only minutes to set up, the Sedgwick TESH is easy to use and accurate in operation. Work is positioned on the rolling table against a depth stop and a fence, and is secured by a cam action clamp. Its end is then passed between two horizontally mounted cutterheads which machine the top and bottom cheeks of the tenon. The tenon width is set by raising or lowering the top motor, and its position on the timber by raising/lowering the two motors in tandem. Variations in shoulder length are set using a multi-position depth stop, and staggered tenons are achieved by simple handwheel adjustment of the top motor. Stepped tenons, splayed tenons, scribed tenons, double tenons, and multiple bridles are all possible on this versatile machine. Combinations of 90 degree and bevelled cutting discs with appropriate spacers can also be fitted to produce interleaved joints as used in sash window construction. The Sedgwick TE/TESH is designed and built to withstand continuous production use. Its cast iron base, column and slideways provide a rigid and durable mainframe assembly, and the 2.2Kw motors supply ample power. The generously proportioned cast iron sliding table is mounted on bearing equipped hardened steel rollers for minimum wear, and cutterhead slide movements are easily adjusted on dovetail slides for ease of maintenance. The TE/TESH offers all of these safety features as standard: Automatic braking Starters with thermal overload, no volt release protection and lock off emergency stop switch. High performance lightweight cutter blocks with chip limiting devices Large diameter dust extraction outlets One piece front cutter guard Front & rear table guards Nsdpoy Efzqefx Akujlb Machine Specification : Ex College A1 Condition - Unused TIMBER CAPACITY 150 x 300mm MAXIMUM TENON LENGTH 150mm TABLE SIZE mm 765 x 340 (765×300 useful) TABLE WORKING HEIGHT 890mm TABLE QUADRANT ADJUSTMENT +/- 0-60 degrees HORIZONTAL TENONING HEADS CUTTERBLOCKS 150 x 150 x 30mm MAX TOOLING DIAMETER 155mm (BOTTOM) 200mm (TOP) VERTICAL ADJUSTMENT OF BOTTOM CUTTERBLOCK -2mm / + 77mm VERTICAL ADJUSTMENT OF TOP CUTTERBLOCK +4mm / + 150mm HORIZONTAL ADJUSTMENT OF TOP CUTTERBLOCK -50mm /+ 20mm DUST EXTRACTION OUTLETS 2 x 150mm MOTOR RATING 2 x 2.2 Kw (S6 40%) FULL LOAD CURRENT 4.75 AMPS STARTING CURRENT 35 AMPS VERTICAL SPINDLE SHAFT DIAMETER 40mm EFFECTIVE LENGTH OF SHAFT 205mm VERTICAL MOVEMENT 112mm HORIZONTAL MOVEMENT 150mm MAXIMUM TOOLING DIAMETER 350mm SPINDLE SPEED 4000 RPM MOTOR RATING 5.5Kw (S1) FULL LOAD CURRENT 11.5 AMPS STARTING CURRENT 69 AMPS ELECTRICAL VOLTAGE / FREQUENCY 3 PHASE + EARTH; 400/230 V – 50/60 Hz REQUIRED FUSE SIZE 25A/ph REQUIRED CABLE SIZE 4mm2

Condition: used, Spray enclosures, Paint fume, Used equipment Manufacturer: Kematechnik Type: IM-SZ-1,5-4000 Nodow Tt Tvopfx Akuelb Overall dimensions: Width: 1500 mm Depth: 2550 mm Height: 2230 mm Year of manufacture: 2017 Airflow capacity: 4000 m³/h Motor power: 2.2 kW

Condition: ready for operation (used), Year of construction: 1985, Double-sided tenoning machine for parquet FOD Njdpfxoilc Ncs Akuolb DOUBLE-SIDED for parquet production, it has a face leveling saw and a vertical cutter for the production of a groove

Condition: used, Painting system consisting of: Pos.1 Venjakob belt conveyor - Manufacturer: Venjakob - Working width: 1,300 mm - Length: 3,000 mm - Feed adjustable via handwheel ~ 2.5 – 7.5 m/min - Volt, Hz: 400 / 50 - Colour RAL 7035 Pos.2 Cefla dust extraction machine - Manufacturer: Sorbini - Type: VS/32-E - Year of manufacture: 1998 - Working width: 1,300 mm - Working height: 900 mm + - 20 mm - Operating side: right - Roller conveyor - Air blowing channel, above 2 pcs. - Air blowing channel, below 1 pc. - Dust remover brush - With ionisation bar from above - With ionisation bar from below - With own drive - With own control - Length ~ 910 mm - Width ~ 2,600 mm - Weight 1,260 kg - Extraction nozzle D 180 + 120 mm - Total connection 7.6 kW - Volt, Hz 400/ 50 Pos.3 Venjakob VEN SRAY Perfect automatic spraying machine - Manufacturer Venjakob - Type. VEN SPRAY PERFECT - Year of construction 2013 - Working width 1,300 mm - Working height 940 + - 20 mm - Operating side left - IR preheating, number of radiators 2 pcs. - Duo-design spray gun drive - Dry suction - Diameter of suction nozzle 600 mm - Exhaust air capacity 10,000 m³/h - Belt transport system - feed speed infinitely variable ~ 4-10 m/min - conveyor belt cleaning system - paint recovery via V-belt system - gun control, EPS-CNC CNC 7000 - colour management system for number of pumps 3+1 pcs. - number of installed airless spray guns 4 pcs. - Quick-change system for spray guns - Remote maintenance system - Dust cover on the outlet side of the machine - Exhaust air recirculation system - Exhaust air control of the suction ventilator - Machine suitable for water-based paints - Machine suitable for solvent-based paints - Length 5,509 mm - Width 4,500 mm + 2,400 mm - Height 3,380 mm + 510 mm - Total connection ~ 20 - 26 kW - Volt, Hz 400/50 - Colour RAL 7035 - Kremlin AVX AirMix spray guns - Small parts container - gun support arm system for quick removal of 4 AirMix spray guns from the spray booth, including quick couplings for pneumatics and material hoses. Pos.4 Venjakob belt conveyor - manufactured by Venjakob - working width 1,300 mm - length 2,000 mm - feed adjustable via handwheel ~ 2.5 – 7.5 m/min - Volt, Hz 400 / 50 - Colour RAL 7035 Pos.5 Cefla pallet dryer - Manufacturer Cefla - Type VN 2000/5500/190.5/30 - Year of construction 2003 - Working width 1,300 mm - Number of pallets 30 pcs. - Pallet length 5,600 mm - Usable pallet length 5,300 mm - Load capacity per pallet 300 kg - Max. part height ~ 110 mm - Clearance between pallets 120 mm - Dimension: centre of pallet to centre of pallet 3,658 mm - Max. part length ~ 5,200 mm - Number of controllable temperature zones 2 pcs. - Supply air flow rate 6,000 m³/h - Exhaust air flow rate 6,000 m³/h - Heat output max. 175 kW - Max. drying temperature ~ 55 - 60 degrees - With heat exchanger, hot water - Without hot water control valves - U-shaped flow direction - Inlet side on the right - Feed speed via frequency converter control ~ 2-20 m/min - Suitable for water-based paints - Suitable for solvent-based paints - Length 7,820 mm mm - Width 6,130 mm - Height 3,905 mm - Total connection ~ 23 kW - Volt, Hz 400 / 50 - Voltage fluctuations max. +/- 5 % - Without control valves and water pumps Nsdpfx Aov I Akvokuolb Pos.6 Cefla belt conveyor - Manufacturer Cefla - working width 1.300 mm - length 2.000 mm - feed adjustable via handwheel ~ 2.5 – 7.5 m/min - volts, Hz 400 / 50 - colour RAL 7035

Year of construction: 2026, condition: new, Parts cleaning system, spray cleaning system type L90 automatic hot water parts washer with automatic basket drive by means of gear motor, stainless steel washing pump (Lowara), rotating 3-sided spraying system (from below, from the side and from above) with stainless steel nozzles. - basket diameter: 790 mm - useful height: 500 mm - max. loading weight: 150 kg - spraying pressure: 3 bar - tank volume: 105 litres - heating: electrically adjustable (RT - 90°C) plant dimensions (LxWxH): 1.150 x 1.250 x 1.900h mm Empty weight: approx. 220 kg Washing time clock freely adjustable via Omron timer (minutes and hours) complete cleaning machine (interior and exterior) made of stainless steel 1.4301 water circulation and loading basket made of stainless steel 1.4301 Insulation of the complete system (tank and cabin) made of stainless steel 1.4301 Mechanical lid lock Bath cover with fine filter (2.000 micron) Suction filter as pump protection Operating hours counter Steam vapour extraction incl. condensate recirculation Preparation for later installation of an oil separator Nlodpfx Akohgh I Soueb Parts washer is as good as new, never used. OTHER BASKET DIMENSIONS AVAILABLE ON REQUEST !!!

Year of construction: 2025, condition: new, Parts cleaning machine, spray cleaning system type L122 automatically working hot water chamber washing machine with basket drive by gear motor, housing of the unit made of stainless steel 1.4301, - 2 pieces 3-sided arranged nozzle systems made of stainless steel with stainless steel flat spray nozzles, - 2 pieces washing pumps made of stainless steel (Fab. Xylem/Lowara), - level control as protection against dry running - 2 pcs. suction filter as pump protection - Oil skimmer for bath maintenance - basket diameter: 1.150 mm - useful height: 700 mm - max. loading weight: 300 kg - spray pressure: 2x 3 bar - tank capacity: 270 liters - heating: electrically adjustable (RT - 60°C) - connected load (electric): approx. 11,5 kW Nsdpfx Aehl Ic Rokuolb - plant dimensions (WxDxH): 1.480 x 1.540 x 2.195(h) mm

Year of construction: 2026, condition: as good as new (ex-display), Parts cleaning machine / spray cleaning system type L102 automatically working hot water parts washing machine with basket drive by means of gear motor, 2 stainless steel washing pumps (Fab. Lowara), 2 pieces circulating 3-sided spraying systems. Insulation of the complete plant included. Nedpedz Dy Hofx Akuelb - Basket diameter: 910 mm - useful height: 520 mm - max. loading weight: 250 kg - spraying pressure: 2x 3 bar - tank volume: 175 litres - heating: electrically adjustable (RT - 90°C) plant dimensions (LxWxH): 1.300 x 1.250 x 1.990h mm Empty weight: approx. 300 kg washing time clock freely adjustable (minutes and hours) complete cleaning machine (interior and exterior) made of stainless steel 1.4301 water circulation and loading basket made of stainless steel 1.4301 Insulation of the complete system (tank and cabin) made of stainless steel 1.4301 Mechanical lid lock Bath cover with fine filter (2.000 micron) 2 pcs. Suction filter as pump protection Operating hour meter Steam vapour extraction incl. condensate recirculation Parts washer is as good as new (test plant/technical centre) OTHER BASKET DIMENSIONS AVAILABLE ON REQUEST !!! This offer is subject to change and non-binding. Changes, errors and prior sale expressly reserved.