Used Ave Tappatore 6T for sale (1,200)

Condition: good (used), Year of construction: 2014, functionality: fully functional, machine/vehicle number: LP-S08-142F, overall weight: 2,500 kg, nominal power: 5 kW (6.80 HP), Equipment: documentation/manual, Speed: 10 - 30 bags/min, depending on bag volume the speed may vary from these figures. Bag types: Pre-made stand-up pouches, flat pouches Bag size: Width 180 - 400 mm, bag length 120 - 500 mm Sealing: Sealing with constant heat (special sealing bar) Bag magazine: Stacking magazine Change of bag width: Gripper sets can each be adjusted via a motor The machine is offered without dosing system A labelling system with thermal transfer printer can be integrated. However, it is not included in the offer. See separate offer (€ 7,400) Njdpfx Aksyg Hmcsuelb Video available on request.

Condition: good (used), Low and Duff Chocolate kettle 6000Kgs chocolate kettle, hot water jacket, top mounted motor with agitation and scrape surface, viewing hatch on top, side bottom discharge, with pump for discharging chocolate, 3Ph Nedpfomqm Dzjx Akuelb

Condition: new, Year of construction: 2024, Equipment: all wheel drive, soot filter, Magni RTH6.26 Rotating Telehandler 6t 25.8m The 6.26 is extremely versatile, as it can be used as a telehandler with forks, an all-terrain crane with a winch, or an aerial work platform with a basket, simply by changing the attachment. In addition, the machine automatically recognizes the attachment thanks to the RFID system and automatically sets the corresponding safety features and load chart. With the ROPS/FOPS Level 2 certification, the cab guarantees the highest level of safety during all operating phases. Stabilizers: Telescopic scissors-type outriggers Lifting capacity: 6,000 kg Maximum capacity at height: 3,500 kg Lifting height: 25.8 m Maximum outreach: 22.2 m Engine: Deutz TCD 3.6 L4 HT Stage V Rated power: 100 kW / 136 hp @ 2,200 rpm Hydraulic flow: 130 l/min Nodpfjxmqyrsx Akujlb Number of gears: 2 Hydraulic system: 350 bar Load sensing Length: 7.7 m Width: 2.5 m Ground clearance: 33 cm Unladen weight: 19,600 kg Travel speed: 20 km/h Rotation: 360° continuous Standard air conditioning: Yes Automatic attachment recognition: Yes Errors and prior sale excepted. Internal vehicle number: R66 WhatsApp support available! If you have questions about the vehicle or need more information, feel free to contact us conveniently via WhatsApp. WhatsApp WhatsApp

Condition: new, Year of construction: 2022, Magni H6U 6t load hook with Manitou quick coupler Errors and interim sale excepted. Internal vehicle number: R70 WhatsApp support available! Nodexmqxbopfx Akujlb If you have questions about the unit or need more information, feel free to contact us conveniently via WhatsApp WhatsApp WhatsApp

Condition: new, Year of construction: 2024, Magni 6t winch W6U with Manitou quick-change mount, 3 units available Subject to errors and prior sale. Internal vehicle number: R68 WhatsApp support available! Nsdpfx Aexmqtxekuelb If you have any questions about the vehicle or need further information, feel free to contact us conveniently via WhatsApp WhatsApp WhatsApp

Condition: used, Beam claw, sheet metal clamp, sheet metal claw, beam clamp, sheet metal gripper, material gripper, material gripper, profile steel tongs, plate gripper, lifting claw, lifting clamp Nledpfx Aekm Rn Iskuob -Manufacturer: ip, safety lifting clamp type IPSUNZ 6t with swiveling support ring -Clamp range: 32-64 mm -Load capacity: 6 t -Number: 4x clamps available -Price per piece -Dimensions: 310/100/H420 mm -Weight: 24 kg/pc.

Condition: used, Pressure monitor, pressure switch, pressure limiter, gas pressure switch -Manufacturer: Kromschroder, gas pressure switch unused OVP Njdpfx Akegh Dw Souelb -Type: DG10U-6T -Control range: 1-10 mbar -Pmax.: 600 mbar -Dimensions box: 75/75/70 mm -Weight: 0.4 kg

Condition: good (used), Sheet metal clamp, sheet metal claw, beam clamp, beam claw, sheet metal gripper, material gripper, material gripper -Sheet metal claws -Span: 50 to 100 mm Nedpfx Aedg Snnokuelb -Load capacity: 6000 kg -Quantity: 1 piece available -Price: per piece -Weight: 29 kg/piece

Condition: good (used), Beam claw, sheet metal clamp, sheet metal claw, beam clamp, sheet metal gripper, material gripper, material gripper, profile steel tongs, plate gripper, lifting claw, lifting clamp -Manufacturer: IP, Safety lifting clamp type IPUNZ with swiveling support ring -Clamping range: 0-32 mm -Load capacity: 6 t Nlsdpfx Akokm Rnvjuob -Number: 23 terminals available -Price: per piece -Dimensions: 280/100/H455 mm -Weight: 23 kg/pc.

Condition: good (used), Beam claw, sheet metal clamp, sheet metal claw, beam clamp, sheet metal gripper, material gripper, material gripper, profile steel tongs, plate gripper, lifting claw, lifting clamp -Manufacturer: IP, Safety lifting clamp type IP 10 with swiveling support ring -Clamping range: 0 - 50 mm -Load capacity: 6 t Nodskm Rm Uspfx Akuolb -Number: 8 terminals available -Price: per piece -Dimensions: 300/100/H430 mm -Weight: 25 kg

Condition: ready for operation (used), Heidenhain LS 603 length measuring rod ML 470 mm Id.336 972-6T SN:12359072E + AE LS 603 reading head Id. 326 799-01, the article has been refurbished, used, normal signs of wear, 100% functional, scope of delivery as per photos Nledsrcvkbjpfx Akuob

Condition: new, Year of construction: 2025, load capacity: 230 kg, lifting height: 8,400 mm, empty load weight: 2,700 kg, transport width: 1,540 mm, All-terrain crawler articulated boom lift, off-road platform, tracked platform Drivable while elevated. Ideally suited for tree and hedge trimming, orchard management, hop field cultivation, and assembly work both indoors and outdoors. Its low weight allows the machine to be transported with a car trailer. FRONTEQ Nodpexycxasfx Akuelb Model: FBZ-6T Payload capacity: 230 kg Platform dimensions: 1.15 x 0.75 m Rotating platform: 80° / 80° Transport dimensions: 5.04 m x 1.54 m Height: 2.10 m Weight approx.: 2,700 kg Working height: 8.4 m Platform height: 6.4 m Maximum outreach approx.: 4.3 m Gradeability up to: 45% Maximum working inclination: 3° / 3° Overload shutoff Proportional hydraulic drive Battery powered: 2 x 4 pcs. 6 V / 230 Ah Integrated charger 24 V / 60 A German operating manual included 2-year manufacturer's warranty Other sizes as well as scissor lifts with crawler or wheel chassis available. For further technical data or offers, availability and delivery time, please inquire. Due to EU regulations, this offer is intended exclusively for commercial customers. Private customers please inquire. Subject to prior sale. All information provided without guarantee. Machines can be collected by the buyer or shipped by freight carrier at the buyer’s expense. Loading and packaging can be organized by us. Shipping costs are indicative and may vary depending on distance and unloading options—please inquire. The displayed sales price is the net final price plus VAT. An invoice showing VAT will be provided. Manufacturer’s warranty 2 years: some spare parts available from our stock. If the offered item is a used product, warranty is 12 months if the purchaser is a consumer as defined by §13 BGB. If the purchaser is a business as defined by §14 BGB, any warranty is excluded. If the offered item is a new product, warranty is 24 months if the purchaser is a consumer as defined by §13 BGB. If the purchaser is a business as defined by §14 BGB, warranty is 12 months.

Condition: used, Year of construction: 1999, Optimize Your Bottling Operations with a Used Arol Capping Machine 6 Heads Aluminum Screw 9000 bph When it comes to efficient bottling operations, the importance of a reliable capping machine cannot be overemphasized. For experts in the bottling industry seeking dependable and high-performing equipment. Consider a used Arol Capping Machine with 6 heads aluminum screw and a capacity of 9000 bottles per hour (bph). Nodpfxevgugyj Akuelb Arol is a renowned brand in the industry, recognized for its quality and durability. This particular model was manufactured in 1999, yet it still retains its high performance and reliability, a testament to Arol’s commitment to building long-lasting machinery. Its stainless steel casing ensures it withstands harsh conditions of the bottling environment, thus guaranteeing long-term use. Arol Capping Machine: Quality and Durability for the Bottling Industry The machine features a 6-head capping system, each equipped with 4 rollers, capable of tightly securing aluminum screw caps of sizes 31.5 x h.60 and 31.5 x h.18. The efficiency of this machine is enhanced by two centrifugal cap distributors that ensure a continuous supply of caps to the capping heads. Furthermore, the presence of cap descent channels with photocell presence sensors prevents the capping operation from proceeding without a cap, thereby avoiding unnecessary downtime and increasing overall productivity. Another key feature of this used Arol Capping Machine is the variable height of the capping head. This feature allows for flexibility and adaptability to different bottle formats, thus making the machine suitable for a variety of bottling operations. Furthermore, the machine supports two bottle formats, enhancing its versatility within your production line. Smooth Production Flow and Adjustable Speed Controller For those concerned about safety, this Arol Capping Machine doesn’t disappoint. It is equipped with safety protections to prevent workplace accidents, ensuring the well-being of your employees while they operate the machine. The machine’s design allows for bottle entry from the left, providing a smooth flow within your production line. Also, with a variable speed controller. You can adjust the production speed according to your needs. At peak performance, this machine can produce approximately 9000 bph. This enhancing your production capabilities significantly. Conclusion: A Long-Term Solution for Bottling Optimization In summary, this used Arol Capping Machine with 6 heads aluminum screw and a capacity of 9000 bph offers a blend of efficiency, versatility, and safety. It’s a perfect choice for bottling machines experts seeking to optimize their bottling operations. Despite its age, it still guarantees top performance, reflecting the quality and durability that Arol is known for in the industry. With this machine, you’re not just investing in a piece of equipment. You’re investing in a solution that will bring value and efficiency to your bottling process for years to come.

Year of construction: 2025, condition: new, functionality: fully functional, Available in different sizes and capacities. Domino is a professional floor stove designed to meet the needs of simple and versatile use. It is ideal for baking bread, desserts and pizzas in the tray. The Domino series is especially suitable for bakeries, pastry shops, pizzerias and hotels. Basic characteristics: Baking temperature up to 350°C Height of the working floor: 18 cm (optional: 25 cm) 3 power levels available: STANDARD, MAXIMUM and TRAY PIZZA (on some models at an additional cost) New design suitable for blending into the interior Number of stackable floors: from 1 to 4 Fydrofire® Fireclay Plates Fydrofire® floor slabs provide greater reliability and even heat distribution Standard on all models. Control Panel & Software TOUCH electronic control "READY TO BAKE" function – the stove is ready for the set temperature with lower energy consumption "RECOVERY TIME" function – you always know how much time is left until the furnace is ready Access password management – guarantees consistency in baking by restricting access to recipes USB 2.0 port for fast and secure data transfer Energy Efficiency POWER MANAGEMENT: energy-saving mode for floors and steam generators, with 3 different modes according to the type of baking OPT display – shows the efficiency of the furnace use, enables conscious use and savings SLEEP function – to save during periods of inactivity Temperature control using two probes per floor Minimum insulation thickness: 100 mm Glass that reflects heat Steam generator (optional) with optimized performance and tuning from the panel Steam generator on/off button Automatic switching on and off by days and weeks Automatic shutdown in case of prolonged inactivity Display of time for conscious use of the stove Ready to connect to a power limiter device Construction Stainless steel front and hood Side panels made of prepainted sheet metal From the Squirrels, Squirrels, Squirrels Independent heater at each end of the floor Concrete and fireclay baking plate Lightweight aluminum frame for easy transport and installation Automatic control of the steam ejection damper Doors with upward opening – saves space Double Spring Doors Easy and quick cleaning of the glass without removing it Large stainless steel handle, insulated plastic handles for safe and ergonomic handling Nlsdpfx Akjwhdpxsuob The internal dimensions of the floor correspond to the actual width of the opening Double lights per floor, with on/off switch Control panel on the right. Technical characteristics: Floor: 3 Floor entrance height: 18 cm Number of trays 60x40: 6 pieces per floor Floor dimensions width x depth: 124 x 122 cm Oven dimensions WxDxH: 163 x 161 x 241 cm Power: 13.6 kW per floor Weight: 185 kg one floor

Condition: excellent (used), Year of construction: 2024, Mfd. 2024 Chip Blaster High Pressure pump 8 Port Programmable High Pressure Manifold Nlsdpfxsyzkbhe Akujb 1000 PSI 12 Port Coolant Manifold with Shut Off Valves Parts Catcher Sub Spindle & Back Working Attachment Spindle Drive Motor: 5.00 Nm (Nominal Torque) Max. Speed: 5000 RPM Feed Motors (X & Z): 2.1 Nm3000 RPM (X Has Break) Travel Z: 7.874″ Stroke Rapid Feed Rate: (Z) : 1000 IPM Travel X: 4.375″ Stroke Rapid Feed Rate (X): 200 IPM Cross Slides Motors: 2.1 Nm, 3000 RPM ( 4th X Motor Has Break) 1st Travel: 2.625″ Stroke 2nd Travel: 2.000″ Stroke 3rd Travel: 7.400″ Stroke 4th Travel X: 1.750″ Stroke 4th Travel Z: 4.062″ Stroke Rapid Speed: 200 IPM Specs to be verified by purchaser

Condition: good (used), Year of construction: 1980, Davenport Model B 3/4" Mfd. in 1980s Nodpsh I Euaofx Akujlb Pickoff / Back Finish Threading Stock Reel and Stand Chip Conveyor Noise Tamer Sound Enclosure Refurbished and Ready to Run Several similar machines available

Condition: used, Craven 2000mm x 8000mm Heavy Duty Lathe 2000mm swing over bed 1500mm swing over saddle 8,000mm between centres Main drive 60kW, 40 ton load capacity Spindle speeds 2 – 152 rpm Steadies Nedpfx Aex Hp Iwjkuelb 2000mm Bed extension

Condition: used, total height: 2,500 mm, total length: 3,500 mm, total width: 2,500 mm, Colour: Green Empty weight: 10.000 kg Price: On request - Documentation available: Yes - CE certificate present: No - Drive system: Conventional - Power [kW]: 11.5 Nlodpfx Akoyx Tvieuob - Centre height [mm]: 700 - Swing over bed [mm]: 1400 - Carriage turning diameter [mm]: 640 - Distance between centres [mm]: 800 - Bed width [mm]: 700 - Spindle bore [mm]: 80 - Min. spindle speed [rpm]: 240 - Max. spindle speed [rpm]: 110 - Options: Digital readout, Facing lathe, Quick-change tool post - Transport dimensions: 3500mm x 2500mm x 2500mm (l x w x h) - Transport weight [kg]: 10000kg - Transport packages [pcs.]: 3 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: ready for operation (used), functionality: fully functional, total length: 2,700 mm, total height: 120 mm, total width: 50 mm, load capacity: 3,000 kg, Meta Multipal Beams – approx. 270 cm | Inspected & Used The Meta Multipal beams with an approximate length of 270 cm are from inspected used stocks and are available for immediate delivery from our warehouse. They are ideal for expanding existing Meta pallet racking and heavy-duty shelves. Additionally, they are compatible with the Jungheinrich system Type S – making them flexible for various warehousing requirements. Thanks to their robust construction and original design, they are reliable for daily warehouse operations. Specifications: - Length: 270 cm - Height: 12 cm - Width: 5 cm - Racking system: Meta - Type: Multipal - Load capacity: up to 3000 kg - Includes safety pins - Original part no.: 402 6212 441291 - Used items, available from stock, immediate delivery possible. -- MULTIPLE UNITS IMMEDIATELY AVAILABLE -- Price: Nsdpfoy Ug Tmsx Akuolb €25.00 net €29.75 gross You will receive an invoice with VAT shown separately. HAVEN’T FOUND THE RIGHT SOLUTION YET? Visit our website for a quick overview of many offers and product variations! Transport: Delivery is available upon request by our partner freight forwarder, with costs depending on your postal code. Assembly: Our trained personnel are available to assist you professionally with the assembly and disassembly of your equipment as needed. Our recommendation: Let us know your requirements... We are happy to assist you in realizing your projects, from planning and ordering to assembly. INTERESTED OR HAVE QUESTIONS? Feel free to contact us by message or phone call. You can find our phone number on our company page. ☎️ We are available by phone Monday to Friday, 08:00 - 15:00. Alternatively, send us a message with your name and number, and we will get back to you as soon as possible.

Condition: used, Technical details: faceplate diameter: 1500 mm center height: über Fundament: 1250 mm revolution per minute: 2,1 ... 96 / 12 step U/min feed min/max: 0,3 ... 2,5 / 18 step mm/min. spindle bore: Ø 82 mm tailstock adjustment - manual: quer: 55 mm tailstock quill stroke: 400 mm tailstock taper MT: 6 weight of the machine ca.: 15 t dimensions L x W x H: Spindelkasten: ca. 2,0 x 1,6 x 2,1 m dimensions L x W x H: Support: ca. 6,0 x 2,1 x 1,6 m Stand support with bed slide: -bed slide travel 4,300mm motorized -cross slide 1500mm -Cross slide 600mm -Top slide 250mm Nodpfxsu Ix Sgs Akuolb -Tool holder with clamping claw Bed guide dimensions LxW: 6000 x 1500mm 4 base plates each 6000x2050x200mm *

Condition: excellent (used), Year of construction: 2013, Year of manufacture: 2013 Nsdpoy Tu Dkjfx Akuelb Series 2200

Condition: excellent (used), For sale: professional cutter and drill bit sharpener, model PP U3. Condition: very good, complete unit ready for operation. Included in the set: • Set of grinding wheels • Adjustable angular tool holder • Workshop lamp with flexible arm • Keys and clamping elements Nlodpjxdh Hqjfx Akueb Specifications: • For sharpening cylindrical and spiral end mills • For sharpening step and cylindrical drills • Wheel linear speed up to 35 meters per second • Maximum noise level: 66 dB • Machine weight: 41 kg Solid, stable construction—ideal for precise tool machining. A reliable solution for tool rooms, CNC workshops, and machine shops.

Condition: excellent (used), For sale: Professional lifting set: DEMAG chain hoist + VETTER travelling beam – complete kit High-quality German-made equipment, designed for industrial use. TECHNICAL DATA: Lifting capacity: 2000 kg (2 tons) Beam length: approx. 242 cm Hoist manufacturer: DEMAG Beam manufacturer: VETTER Fördertechnik Power supply: 400V, 3 phases, 50 Hz Year of manufacture: 1997 Lifting speeds: 2-speed (slow + fast) Control: pendant remote (up/down + STOP) Chain: original, in good condition Trolley: manual (moves along the beam) DEMAG hoists are known for their industrial durability and reliability. Nsdpfx Aksy A Tgcjuolb SET INCLUDES: ✔ DEMAG chain hoist ✔ VETTER travelling beam (approx. 2.4 m) ✔ Manual trolley ✔ Control pendant (remote) ✔ Wiring ✔ Safety hook TECHNICAL CONDITION: unit in working order normal signs of use ready for operation without additional investment APPLICATIONS: workshops warehouses production halls service stations assembly work

Condition: good (used), Year of construction: 2012, functionality: fully functional, machine/vehicle number: G2512-01, total width: 1,600 mm, total height: 2,150 mm, total length: 2,550 mm, working width: 450 mm, overall weight: 2,600 kg, power: 46.4 kW (63.09 HP), grinding belt speed: 14,000 mm/s, type of input current: three-phase, grinding belt length: 1,900 mm, compressed air connection: 6 bar, grinding belt width: 470 mm, air demand: 6 m³/h, input voltage: 400 V, operating pressure: 6 bar, workpiece width (max.): 450 mm, Grindingmaster wide belt sander (wet-type) equipped with 2 top-mounted sanding units and a brush unit (Scotch-Brite). The machine is used for surface processing of metal parts up to 450 mm wide. The dust collection container with filter fleece is located underneath. Nsdsyn E H Ropfx Akuelb The machine is in good, partially overhauled condition. Further technical information can be found in the documentation.

Condition: new, Year of construction: 2026, functionality: fully functional, machine/vehicle number: EAN0729389556525, load capacity per storage section: 2,050 kg, total length: 158,200 mm, total height: 4,000 mm, clearance between the columns: 2,700 mm, shelf height: 4,000 mm, number of shelf rows: 7, clear span: 2,700 mm, load capacity: 4,100 kg, frame height: 4,000 mm, load per truss pair (max.): 2,050 kg, Pallet racking system: 7 double rows each with 4 bays 4 m high, each with 2 beam levels (clear width 2700 mm) Scope: - 70 frames, 4 m high (RM4011) - 280 floor anchors - 70 spacers for double rows - 224 beams, 2.7 m long, 0.09 m high (TR27114) - 14 load capacity signs Delivery free to construction site Frames bolted, not pre-assembled Nljdjy T Engjpfx Akujb Freight / Delivery: - Maximum 20 working days after receipt of payment - Free to construction site / assembly location - Unloading from the truck must be carried out by the buyer using their own lifting equipment - Deliveries are made throughout the territory of the Federal Republic of Germany (excluding islands). Deliveries to EU countries only by individual arrangement.