Used Bar Peeling Machine for sale (71,350)

Condition: ready for operation (used), * Brand: Mogensen Bdjdpeywm Amsfx Afwog * Model: bar sizer * Type: SV 1526 * with: 2 decks * Driving: 2 pieces vibration motors of each 2,7 kW.

Condition: ready for operation (used), * Brand: Mogensen * Model: Bar Sizer Bodpfjywl R Aex Afwjdg * Type: VX 2058 * Dim.: 6000 x 1900 mm * Execution: 5 steps * Bars: length 1000 mm, diameter 40 mm Ø, distance C.C: 100 mm * On stock: 2 pieces

Condition: ready for operation (used), * Brand: Mogensen * Model: Bar Sizer * Type: VX 2558 * Dim.: 6000 x 2400 mm * Execution: 5 steps Bsdpfxoywl Rve Afwsdg * Bars: length 950 mm, diameter 30 mm Ø, distance C.C: 36 mm

Year of construction: 2014, condition: excellent (used), functionality: fully functional, machine/vehicle number: 1400040685, Special Features: Retrofit to WIN10 – NEW – with 6 months warranty on computer and UPS Water-cooled spindle, 9.5 kW S1 3-layer machining possible Carefully cleaned and overhauled – excellent condition Description: Graphical operator guidance and graphical service support A-axis for stepless machining from above – swivel angle 180° HSC milling spindle for speeds up to 24,000 rpm Large machining width Standard with clamping detection and automatic clamp positioning 8 tool stations Complete profile machining with stationary profile bar Rapid basic positioning of the machining unit (up to 64 m/min) on the X axis Robust, low-wear direct drive Protective hood Digital axis controllers for all 4 axes with high-resolution measuring system 4-axis industrial PC control 2 1/2 D interpolation 15" TFT color screen Network connection RJ45 10/100 MBit Hard disk Full PC keyboard Remote maintenance via TCP/IP (requirement: internet access) Technical Specifications: Max. machining length without frontal machining: 7,600 mm Bedpfx Afoy Ah Tkswedg Max. machining length with frontal machining: 7,500 mm (tool-dependent) Travel X-axis: 7,700 mm Travel speed X-axis: 65 m/min Travel Y-axis: 850 mm Travel speed Y-axis: 60 m/min Travel Z-axis: 650 mm Travel speed Z-axis: 60 m/min Swivel angle A-axis, freely programmable in 0.1° increments: 0 - 180° Positioning accuracy: X-axis: +/- 0.1 mm / 1 m Y-axis: +/- 0.1 mm Z-axis: +/- 0.1 mm A-axis: +/- 0.1° Max. spindle speed: 24,000 rpm Max. spindle power: 9.5 kW S1 Tool holder: HSK F 63 Max. cutter diameter: 80 mm Max. milling cutter diameter: 200 mm Compressed air connection: > 7 bar Voltage: 400 V, 3 PH, 50 Hz Fuse: 35 A 8 tool stations Included Accessories: Tool setting gauge 8 pneumatic material clamps Automatic clamp detection Dosing spray device Protective hood Front light barrier Side safety fences (left and right) Central chip extraction 2 pneumatic material stops 3-circuit clamping system Length measurement for profile bar Barcode scanner with wireless transmission Special version with light barrier Additional options available on request: Programming software (office) eluCad, incl. hotline contract for 6 months 3D import license for one machine of category "L" Data import license package for one machine of category "L" CSV import license for one machine of category "L" Macro hashing license for one machine of category "L" Other information: The machine is delivered ready for transport, including transport locks, loaded onto truck Additionally, we optionally offer the following services on request: Installation and commissioning Machine training 4/5-axis training package for machine and eluCad

Condition: used, Year of construction: 1974, round bar steel 63 mm square edge steel 55 mm flat steel 100 x 25 mm Bdodpfx Afshxzmcjwjg engine 380 V, 6,3 kW weight ca. 2.450 kg +++++ Please note: The machine is dismantled and ready for loading. It is not possible to show it under power or make a video. Our offer includes already the best pictures. So we don’t have and won’t send additional pictures. +++++

Condition: excellent (used), Year of construction: 2017, spindle bore: 8 mm, spindle speed (max.): 16,000 rpm, turning length: 125 mm, bar diameter (max.): 7 mm, Hanwha XD07 CNC Swiss-type lathe – condition: very good Iemca Elite 112 bar feeder High-pressure unit with 4 switchable valves Kraft und Bauer fire extinguishing system Max. machining diameter: 7 mm Main spindle speed: up to 16,000 rpm Sub spindle speed: up to 16,000 rpm Bedpfx Asxw Nxujfwodg C-axis: main and sub spindle Tool stations Turning holders: 4 Face drilling stations: 3 Cross drilling stations: 3 Dimensions: 1520x910x1520 mm Weight: 1000 kg

Condition: excellent (used), Year of construction: 2016, spindle bore: 8 mm, spindle speed (max.): 16,000 rpm, turning length: 125 mm, bar diameter (max.): 7 mm, Hanwha XD07 CNC Swiss-type lathe – condition: very good Iemca Elite 112 bar feeder High-pressure unit with 4 switchable valves Kraft und Bauer fire extinguishing system Max. machining diameter: 7 mm Main spindle speed: up to 16,000 rpm Sub spindle speed: up to 16,000 rpm C-axis: main and sub spindle Bdjdexw Nx Ijpfx Afweg Tool stations Turning holders: 4 Face drilling stations: 3 Cross drilling stations: 3 Dimensions: 1520x910x1520 mm Weight: 1000 kg

Year of construction: 2010, condition: new, functionality: fully functional, Technical specifications: • Manufacturer: JMC Recycling Systems Ltd. (England) • Model: Dolphin 5005-Lite • Year of manufacture: 2010 Bsdpfx Afoxm Uf Sjwjdg • Connection: 380–415 V, 3-phase • Recommended hydraulic oil: ISO 46 • Robust construction, mobile on wheels • Includes control unit and hydraulic drive Condition: • NEW, unused • Only storage marks present (see pictures) • No operating hours

Condition: good (used), Year of construction: 2006, Working height: 890 mm Bodpexlrilofx Afwjdg The machine was last used to process Helima's 26 and 45 rungs. It can be converted to process other types of rungs. Width: 900 mm Depth: 1200 mm Total height: 1100 mm Weight: approx. 120 kg

Condition: good (used), Year of construction: 2006, Working height: 880 mm Bdodpfx Asxlradofwjg The machine was last used to process Helima's 26 and 45 rungs. It can be converted to process other types of rungs. Width: 700 mm Depth: 1200 mm Total height: 880 mm Weight: approx. 120 kg

Condition: good (used), Year of construction: 2006, Working height: 900 mm The machine was last used to process Helima's 26 and 45 rungs. It can be converted to process other types of rungs. External dimensions: Width: 800 mm Total height: 1170 mm Depth: 900 mm Weight: approx. 120 kg Bedpsxmgurofx Afwedg

Condition: used, functionality: fully functional, Year of construction: 2005, Tone Hose Stripping Machine RI 180 Bjdpfxexwvf Io Afwsdg - tested - includes accessories DN 6, 8, 10, 13, 16, 25, 32, 40 - shipping possible for an additional charge

Year of construction: 2026, condition: new, Hopper capacity: 40 [kg] Performance: Up to 140 [onions/min] Raw material size: 45 – 120 [mm] Overall width of the machine: 1700 [mm] Overall height of the machine: 2200 [mm] Overall length of the machine: 8500 [mm] Number of working lanes: 2 Onion loading height: 1000 [mm] Bjdpfxed Nh Suo Afwjdg Onion discharge height: 850 [mm] Waste discharge height: 400 [mm] Power supply: 3 x 400 [V] / 50 [Hz] Installed power: 3 [kW] Compressed air connection: 8-10 [bar] Air consumption: 1.9 [m3/min] Noise level: Above 80 [dB] Material of construction: Stainless steel and food-grade plastics CE certificate: Yes Topping cutter: Yes

Condition: good (used), functionality: fully functional, machine/vehicle number: Nr.72.092.010, spindle bore: 12 mm, Iemca CS112 No.72.092.010 Iemca Bar Feeder and Motor Round bars Ø 1 - 12.7 mm (3/64" - 1/2") Supplied with guide sets for 4 mm and 12 mm and with 2 motors for Tornos M4 For 3 m bar lengths Bjdpjrn I Dfsfx Afwsdg ON CLEARANCE SALE REDUCED PRICE! Hexagonal bars Ø 1.3 - 11 mm (3/64" - 7/16") Capacity: 28 bars Ø 7.5 mm - 16 bars Ø 12.7 mm Min. bar change time: 26 sec. (with 3200 mm bars) (mod. 32) Feed speed: 1000 mm/sec. Return speed: 1600 mm/sec. Supply voltage: 230/400 volts Installed power: 1.8 kW

Condition: new, Year of construction: 2026, functionality: fully functional, VKM - Peeling Machine PS2000 Wood diameter: 40 – 200 mm Peeling disc diameter: 458 mm Number of peeling knives: 8 Feed speed: 5 – 15 m/min Air consumption approx. 60 NL/min Peeling disc speed: 1500 rpm Peeling disc drive power: 15 kW Lower feed wheel drive power: 0.37 kW Bsdpfx Aov Uxm Tofwodg Upper feed wheel drive power: 0.37 kW Electrically adjustable raw wood diameter setting via foot switch, also possible during operation.

Condition: new, power: 110 kW (149.56 HP), Year of construction: 2025, Bauxite Crusher: Bauxite is an aluminum ore, and crushers or mills are used to break down the bauxite into smaller pieces for further processing. Jaw crushers, impact crushers, or cone crushers may be used for this purpose. Granite Crusher: Granite is a hard and durable natural stone. Crushers used for granite crushing typically include jaw crushers, impact crushers, and cone crushers. These crushers can handle the varying hardness of granite and produce different sizes of crushed products. Bentonite Crusher: Bentonite is a type of clay with excellent water-absorbing and plasticity properties. Crushers such as jaw crushers or cone crushers are used to break down the bentonite into a manageable size for further processing. Barite Crusher: Barite, also known as baryte, is a mineral consisting of barium sulfate. Crushers like jaw crushers and cone crushers are commonly used in the crushing process of barite. Impact crushers may also be used for shaping and processing finer particles. For each of these minerals, the selection of the appropriate crusher depends on factors such as the hardness of the material, the required final product size, and the specific characteristics of the deposit. It's also important to consider whether a primary crusher, secondary crusher, or even tertiary crusher is needed in the processing flow. Additionally, for certain applications, grinding mills may be employed after the initial crushing stage to further reduce the size of the particles. Grinding mills suitable for these minerals might include ball mills, Raymond mills, or vertical roller mills, depending on the specific requirements of the process. Remember that the choice of crushers and mills is often part of a larger mineral processing plant design, and the selection process should take into account the overall production requirements, mineral characteristics, and economic considerations. Bdsdsq Nx Apepfx Afwog

Condition: used, Manufacturer: Hobart Type: Washing machine Model: UPT 10 Capacity: 130 liters Universal dishwasher: 120 sec 240 sec 280 sec Bjdpst Up Spefx Afwodg Height: 2417 mm Width: 945 mm Length: 1435 mm Voltage: 400V 50Hz 3N Power: 24.5 kW 39.4 A Sertifikat: IP X4 Main material: Stainlees Steel

Condition: new, input voltage: 400 V, Operates on electricity. Fully constructed from AISI 304 18/8 Cr-Ni stainless steel sheet. Features a body reinforced with 25*25*1.2 mm stainless steel box section tubing. Ceramic heating elements are arranged in horizontal rows and can be controlled individually. The unit comprises 5 rows, each with 3 heaters, allowing each element to be replaced independently if necessary. Each machine is supplied with a large AISI 304-grade tray designed to collect fat and prevent drippings from sliced meat. Every tray includes an AISI 304-grade perforated plate to conceal fat drippings. Standard delivery includes 1 skewer, 1 shovel, 1 fat collecting tray, and 2 securing pins. A switch is fitted to reverse the skewer's rotation direction for left- or right-handed operation. Equipped with a special, high temperature-resistant (ld/d) motor mounted at the base of the unit. The device features a fused socket outlet for connection of an electric knife. The skewer's inclined design ensures a constant gap between meat and the heaters. Uniform and rapid cooking is achieved through surround ceramic heaters and a highly conductive ROBAX glass panel mounted in front of the heating elements. The heat-resistant, hygienic ROBAX glass prevents fat from reaching the heaters, ensuring safe operation. Specifications: Heat capacity 9 kW, electrical supply 380-400V 3N AC 50-60Hz, cable cross-section 5*2.5 mm², doner meat capacity 75–90 kg, skewer length 750 mm, dimensions 632*772*1132 mm, net weight 51 kg. Bdjdpfx Afjx Aix Sjwjg

Condition: used, Automatic rebar mesh welding machine MCC001 The machine is designed for welding steel reinforcement mesh from previously shortened reinforcements for rods that comply with the EN 10080 standard. Technical data: Diameter of reinforcing bars: 4mm, 5mm, 6mm Number of longitudinal bars: 2 – 12 Length of longitudinal bars: 200mm – 3000mm Minimum step between longitudinal bars: 100mm Pitch of crossbars: 10mm – 999mm Length of crossbars: 100mm – 1250mm Bdjdsymcpyjpfx Afwog Screen moving speed: 0.1m/s – 1m/s Compression force: 60kg – 190kg Productivity: 1 cycle/minute Electricity: Supply voltage: 400V Voltage frequency: 50Hz Connection type: TN-C Power: 100kVA Higher engine power: 0.8 kW Power of one welding transformer: 35 kVa Pneumatic indicators: Working medium: Compressed air Working pressure: 6 bar Air consumption: 250 l/min Cooling: Cooling type: water cooling Circulation type: forced circulation Maximum incoming heat carrier temperature: 35 °C Heat carrier consumption: 60 l/min Diameter of reinforcing bars: 4 mm, 5 mm, 6 mm Number of longitudinal bars: 2 – 12 Length of longitudinal bars: 200 mm – 3.000 mm Minimum step between longitudinal bars: 100 mm Pitch of crossbars: 10 mm – 999 mm Length of crossbars: 100 mm – 1250 mm Screen moving speed: 0.1 m/s – 1 m/s Compression force: 60 kg – 190 kg Productivity: 1 cycle/minute Supply voltage: 400 V Voltage frequency: 50 Hz Connection type: TN-C Power: 100 kVA Higher engine power: 0.8 kW Working medium: Compressed air Working pressure: 6 bar Air consumption: 250 l/min Cooling type: water cooling Circulation type: forced circulation Heat carrier consumption: 60 l/min

Condition: excellent (used), Catalog number: 8058 TECHNICAL DATA - max. log diameter approx. 750mm - main engine 55kW ADVANTAGES – German-made – for debarking logs – used debarker, very good condition – machine equipped with a feeder and an outfeed – video showing the machine in operation *This is a courtesy listing – the machine is located at a sawmill 15 km from the company's headquarters. Bdjdpfx Aezpwryofwjg Net price: 105,000 PLN Net price: 25,000 EUR, depending on the exchange rate of 4.20 EUR (Prices may vary due to fluctuations in the exchange rate)

Condition: new, Wiedemann Entrindungsanlagen is a family-run company with decades of experience in wood debarking for both stationary and mobile applications. We are manufacturers of debarking machines with rotor openings of up to 120 cm. Bjdpfx Afetzftcewsdg We also offer butt end reducers and complete log yards. For further information please contact us by e-mail or telephone.

Condition: used, Legi-Air 4040Z with Zebra110pax4 label printer and pneumatic stamp. RA1933 Printer manufacturer: Zebra Printer type 110pax4 Control panel: LCD display with status indicator and buttons Print type: thermal transfer printing or direct thermal printing selectable Bjdpjk Ablljfx Afwjdg Interfaces: RS 232 Seriel, IEEE 1284 Print media: standard media, tags and RFID media (reading and coding of RFIF labels) label length min: 12,7mm width print media: 16-114mm ribbon width: 25,4-107mm Ribbon length max: 900m Roll size diameter core: 25,4mm Roll size maximum diameter: 101.6mm Resolution: 203 dots/inch (8 dots/mm) dot size 0,125mm x 0,125mm Print speed: 12 inch/second

Year of construction: 1993, condition: used, Two identical Dreher centrifugal drum machines are offered. Number of drums: 4, total volume: 20l, drive power: 1.5kW, direction of rotation: clockwise/counterclockwise, speed control: continuously variable. Machine dimensions: approx. 1200mm/1000mm/1600mm, weight: 280kg. An on-site inspection is possible. Bedpfx Afszv T I Dswsdg

Condition: as good as new (ex-display), Year of construction: 2026, functionality: fully functional, Rebar bending machine / Bending machine B 50 – exhibition model COMPLETE TECHNICAL SPECIFICATIONS – SEE PHOTO Bsdpfxjzvy S No Afwjdg - CE marking - Incl. bending pins / stop / bending sleeves - Bending capacity max. 50 mm / diameter (single bar) - Foot switch - Complete documentation - Bending via program or individual bends Dimensions: L x W x H 1.3 x 0.9 x 1 meter / Weight 500 kg Errors and omissions excepted.

Year of construction: 1997, condition: ready for operation (used), Machine is fully refurbished & ready to work with dedicated inspection table ( size 2500 mm long x 850 mm width ), we have more if you need in your factory, price for two or more machine could be under negotiate. Bjdpfx Afoxcal Aewsdg The large onion peeler from M&P engineering tops, tails and peels onions of 45mm to 115mm diameter using self adjusting floating knife assemblies over a range of up to 25mm on any one setting. It then slits the onion horizontally from top to tail, the depth of slit is determined by onion quality and grade. The machine finally removes the skin using compressed air providing an end product of optimum appearance.