Used Beam Clamp 350 Mm for sale (92,040)

Condition: good (used), total length: 3,500 mm, total width: 1,100 mm, plate height: 250 mm, Manufacturer: ASQUITH Year of manufacture: 1990 Specifications Metric US Standard Length 3500 mm Width 1100 mm Height 250 mm Number of T-slots 6 + 3 T-slot spacing / jump 365 mm T-slot size 48 mm Weight per plate approx. 2900 kg Number of matching pieces 1 Dimensions (Estimate) Length 3500 mm Width 1100 mm Height 250 mm Weight 2900 kg Lodpfx Ahjwp Haceaoah Please note: The information on this page has been provided to the best of our knowledge and, where possible, obtained from the manufacturer. The information is given in good faith, but accuracy cannot be guaranteed. Accordingly, no representation or contract terms are made. We recommend checking all important details.

Condition: new, Puller set K-2030, 11-piece - Spanning width: 120 mm - Spanning depth: 100-350 mm KUKKO - Two- or three-arm design - With extra-slim puller hooks - For tight spaces Application: for removing gears, bearings, sprockets and synchronizer sleeves - Can be used as an external and internal puller by rotating the puller hooks - Also suitable for removing asymmetrical workpieces - Other technical features: Weight: 8.92 kg Spanning depth: max. 100 / 200 / 250 mm Spanning width: max. 120 mm Lsdpfx Ae Ab A Hkjhaoah

Year of construction: 2002, condition: good (used), beam claw, sheet metal clamp, sheet metal claw, beam clamp, sheet metal gripper, material gripper, material gripper, profile steel tongs, plate gripper, lifting claw, lifting clamp, support clamp, crane clamp Ljdpfx Ahjvgu Nbeaeah -Manufacturer: Greifzug, Corso beam clamp type LT-3B -Flange width: 80 - 320 mm -Load capacity: 3 t -Dimensions: 380/115/H375 mm -Weight: 11 kg

Condition: new, Puller 20-3, Spanning width 200 mm, Spanning length 250 mm, 8.5 t, KUKKO · Two-arm design · With sliding puller hooks that remain parallel at all times · Made of special steel · With a robust spindle for high pulling force and a crossbeam with high bending strength · Puller hooks with large contact surfaces for gentle removal · Optimal adaptation of the spindle to the shaft thanks to a two-sided spindle tip (ball and point); by repositioning the arms, the puller can also be used as an internal puller. Application: universally applicable for removing ball bearings, bearings, gears, etc. · Can be used as both an external and internal puller by rotating the puller hooks · Also suitable for removing asymmetrical workpieces · Other technical features: weight: 7.12 kg · Material: special steel Material: special steel Ledpfe Ab A Afjx Ahaoah Spanning width: max. 250 mm Spanning depth: max. 200 mm

Condition: used, Manufacturer unknown Shaker Fixture Cube / Clamping Cube Aluminum Shaker Fixture Cube, approx. 240 × 240 × 240 mm Professional clamping cube for vibration testing systems, environmental testing technology, vibration tests, and testing laboratories. For sale is a used Shaker Fixture Cube made of aluminum. The clamping cube is suitable for the flexible attachment of test specimens, measurement setups, and fixtures on vibration testing systems. The solid aluminum construction offers high rigidity and is ideal for vibration tests, environmental testing technology, mechanical engineering, as well as research and development laboratories. Technical data: Manufacturer: Unknown Material: Aluminum Type: Shaker Fixture Cube / Clamping Cube / Fixture Block External dimensions: approx. 240 × 240 × 240 mm 4 precision mounting holes, Ø approx. 85 mm Central through-hole Threaded holes on all side surfaces Precision-machined clamping surfaces Robust industrial design Weight: 30 kg Features: Solid aluminum construction Precision-machined clamping surfaces Threaded holes on all side surfaces Four large mounting holes Central through-hole Suitable for individual test setups High rigidity with a compact design Accessories as shown in the pictures Application areas: Vibration testing systems Vibration testing Environmental testing technology Test stands Metrology Mechanical engineering Special machine construction Automotive Aerospace Research and development Testing laboratories Industry Scope of supply: Aluminum Shaker Fixture Cube Laodpfozp E Dkjx Ahaoh Accessories as shown in the pictures Condition: Used Optical condition as shown in the pictures. Normal signs of wear and tear due to age. The table shown in the photos and any other items not explicitly mentioned are not part of the sale. Shipping via parcel service or freight forwarder is possible. Subject to changes, errors and prior sale. We will be happy to answer any further questions by phone.

Condition: used, Your contacts at our company: Mr. Andre Evering Mr. Marcel Brahms Mr. Simon Blank Technical data for the wide-span racking crossbeam: Manufacturer: Nimar Type: MI 50 The scope of delivery includes: 1x Wide-span racking crossbeam, used Material color: gray Crossbeam type: MI 50 Box profile: 80 x 40 mm Clear span: 2,600 mm 2x Locking pins, used Design: fully galvanized For securing the longitudinal beams against unintentional lifting Our services at a glance: (Prices upon request) - Assembly, installation Our general assembly conditions apply. - Racking inspection Racking inspection according to DIN EN 15635, carried out in accordance with the requirements of BGR 234, visual inspection for all racking systems. Lajdpsdh Ub Aofx Ahash - Delivery with our own fleet of vehicles (without unloading)

Condition: good (used), The scope of delivery includes: 1x shelf connector, used Mounting type: on the side of the shelf upright Surface: hot-dip galvanized Overall length: 450 mm For shelf spacing: approx. 350 mm Profile dimensions: U 62 x 30 mm Weight: 0.84 kg | per piece Lsdei Euzdspfx Ahaoah

Condition: used, BAT Shaker Fixture Cube / Clamping Cube Magnesium Shaker Fixture Cube Professional clamping cube for vibration testing rigs / shakers with an M8 thread grid for flexible test specimen mounting For sale is a used clamping cube for vibration and shock testing rigs. The adapter cube is used to securely hold test specimens on vibration testing rigs (shaker systems). Thanks to the numerous threaded holes on several sides, a wide variety of devices and test specimens can be flexibly mounted. The lightweight magnesium construction offers high rigidity with a comparatively low weight and is ideal for development, endurance, and environmental testing. Technical data: Manufacturer: BAT Type: Shaker Fixture Cube / Clamping Cube Lsdpfjzkgqnsx Ahajah Material: Magnesium Threaded holes: M8 grid on several sides Dimensions (approx.): 300 × 300 × 300 mm Weight: approx. 28–32 kg (estimated) Features: Solid magnesium design M8 thread grid on several sides Two stop eyes Precision-machined clamping surfaces High rigidity with low weight Ideal for individual test setups Accessories as shown in the pictures Areas of application: Vibration testing rigs Shock testing Environmental simulation Automotive testing technology Aerospace Development and testing laboratories Quality assurance Industry Scope of delivery: Magnesium Shaker Fixture Cube Accessories as shown in the pictures Condition: Used Optical condition as shown in the pictures. Normal signs of wear and tear, scratches and marks are present. The table shown in the photos and other items not explicitly mentioned are not part of the sale. Shipping via parcel service is possible. Subject to changes, errors and prior sale. We will be happy to answer any further questions by telephone.

Condition: new, Puller 30-20, Spanning range 150 mm, Spanning width 200 mm, 7 tons, KUKKO · Three-arm design · Made of special steel · Robust construction Lodpfx Aho Ab Iwuoajah · Three-arm pullers guarantee a particularly secure grip on the parts to be removed due to the uniform load distribution and ensure centric pulling · The puller can also be used as an internal puller by repositioning the puller hooks. Application: for removing ball bearings, bearings, gears, etc. · Can be used as an internal or external puller by rotating the puller hooks · Also suitable for removing asymmetrical workpieces · Other technical features: weight: 4.14 kg · Material: Special steel Spanning range: 200 mm Material: Special steel Spanning depth: max. 150 mm

Condition: used, Good day, We are offering used clamping beams from Erowa, System 3R and Becker Erodiertechnik. These clamping beams are suitable for wire erosion. The following parts are available: ER-017646 ER-017647 ER-017648 ER-021128 ER-021127 System 3R 3R-239-545-9911-V01 Becker erosion technology SB430-SB680 Laodpotk N E Aofx Ahaeh The clamping devices have signs of wear and are in very good technical condition. Individual acceptance also possible. Spare parts and accessories are available. Do you have any questions? Then we are at your disposal.

Condition: used, Clamping plate, unit carrier, milled surface, welding table, welding table Lodpfx Aob Uhpljhasah -Clamping surface width: 460 mm -Length of clamping surface: 9090 mm -Table height: 206 mm -Working height: 350 mm -Transport dimensions: 9090/490/H350 mm -Weight: 2300 kg

Condition: good (used), Your contacts at our company: Mr. Andre Evering Lsdpjhkrwisfx Ahaeah Mr. Mario Klöver Mr. Falk Deutsch Mr. Simon Blank Technical data for the pallet racking crossbeam: Racking system: SSI Schäfer Type: PR 350 Included in the scope of supply: 01x Pallet racking crossbeam, used Material color: gray Box profile: 110 x 50 mm Clip: 5 hooks Clear width: 1,400 mm Maximum load per pair of crossbeams: 3,000 kg with evenly distributed load 02x Locking pins, used Design: fully galvanized For securing the longitudinal beams To prevent unintentional lifting General information about the item: This item is offered for collection only. Any additional transport or shipping of this item will incur additional costs, which can be requested separately depending on the delivery location or scope of delivery. Our services at a glance: (Prices on request) Assembly, installation Please note our general assembly conditions Racking inspection Racking inspection according to DIN EN 15635, performed according to the requirements of BGR 234, visual inspection for all racking systems Delivery with our own fleet (without unloading)

Year of construction: 1986, condition: used, Beam claw, sheet metal clamp, sheet metal claw, girder clamp, sheet metal gripper, material gripper, material gripper, section steel gripper, panel gripper, lifting claw, lifting clamp, support clamp, crane clamp Ledpjhgkgzsfx Ahajah -Beam clamp: lifting claw type 1160 -Clamping area: see photos -Load capacity: kg -Dimensions: 160/140 / H410 mm -Weight: 13 kg

Condition: new, Puller set KS-2030, 8-piece - Two-/three-arm design with quick adjustment, featuring slim puller hooks - For use in tight spaces - Optimal spindle adjustment to the shaft via a double-sided spindle tip (ball and point) Clamping depth: max. 100 / 200 mm Lasdpfx Ao Ab Azbjhajh Clamping width: max. 90 mm

Condition: used, Your contacts at our company: Mr. Andre Evering Mr. Marcel Brahms Mr. Simon Blank Technical data for the wide-span shelving crossbeam: Manufacturer: Nimar Type: MI 50 The scope of supply includes: Laedpfx Aodh Ublohash 1x Wide-span shelving crossbeam, used Material color: gray Crossbeam type: MI 50 Box profile: 60 x 40 mm Clear width: 2,000 mm 2x Locking pins, used Design: fully galvanized For securing the longitudinal beams against unintentional lifting out Our services at a glance: (Prices upon request) - Assembly Our general assembly conditions apply - Shelf inspection Shelf inspection according to DIN EN 15635, carried out according to the requirements of BGR 234, visual inspection for all shelving systems - Delivery with our own fleet (without unloading)

Condition: new, Puller 20-30, Spanning width 200mm, Spanning distance 350mm, 8.5 t, KUKKO · Two-arm design · With sliding puller hooks that remain parallel · Made of special steel · With a robust spindle for high pulling force and a crossbeam with high bending strength · Puller hooks with large contact surfaces for gentle pulling · Optimal adaptation of the spindle to the shaft through a two-sided spindle tip (ball and point); by repositioning the arms, the puller can also be used as an internal puller. Application: Universally applicable for removing ball bearings, bearings, gears, etc. · Can be used as an internal and external puller by reversing the puller hooks · Also suitable for removing asymmetrical workpieces · Other technical features: Weight: 7.53 kg · Material: Special steel Spanning width: max. 350 mm Material: Special steel Ljdpj Ab A Alsfx Ahasah Spanning depth: max. 200 mm

Condition: good (used), Hello, we offer used Erowa clamping beams in the following dimensions: 220mm 300mm 380mm 460mm Lsdpfjih Smaox Ahajah Other dimensions would also be available. Delivery possible for an extra charge. If you have any further inquiries, we will be happy to address them.

Condition: good (used), Pipe grab, round grab, laying clamp, round material grab, scissor grab -Pipe grabber: unfortunately without type designation -Pipe diameter: approx. 350 to 800 mm -Grip diameter: 2 adjustable ranges, see photos -Dimensions: 750/500/H1120 mm Laedpolyvc Aefx Ahash -Weight: 126 kg

Condition: good (used), Bezel, setting stick, lynette -Manufacturer: Meuser, steady rest with coolant connection from lathe type MV SKV/2-1 -Max. passage: Ø 350 mm -Peak height: 460 mm Laedpfx Ash Uhkzohaeh -Technical drawing: see photos -Dimensions: 820/270/H895 mm -Weight: 160 kg

Condition: good (used), The scope of delivery includes: 1x U-shaped corner guard, used Material color: orange Overall height: approx. 350 mm Overall width: approx. 200 mm Ledpfxjk T Au Ej Ahajah Internal width: approx. 160 mm Overall depth: approx. 360 mm Internal depth: approx. 240 mm Leg dimension: approx. 140 x 140 mm Base plate dimension: approx. 340 x 200 x 8 mm Material thickness: approx. 6.00 mm Bore hole diameter: approx. 16 mm Number of bore holes: 04 pcs. Weight / piece: approx. 14.850 kg General information about the item: This item is offered for pick-up only. Any additional transport or shipping of this item will incur additional costs, which can be requested separately depending on the delivery location or scope of delivery.

Condition: new, functionality: fully functional, jaw width: 20 mm, jaw height: 19 mm, Flat EDM vice Ledpfx Ajymdamjhaoah Brand: Matchling Type: V2075 Length: 125 mm, Width: 100 mm, Height: 20 mm (without spindle) Material: stainless steel Jaw width: 20 mm Clamping range: up to 75 mm Jaw height: 19 mm Down-thrust feature Corrosion-resistant In wooden box

Condition: good (used), Clamping bracket, T-slot plate, clamping table, clamping cube, clamping plate, clamping tower, clamping box Laedpoxugraofx Ahajh -Clamping cube: heavy version -Length: 350 mm -Material: Steel -Dimensions: see photo -Dimensions: 350/250/H200 mm -Weight: 62.3 kg/pc.

Condition: new, 3D Probe, collet-type, D.20mm, analog, IP67, HAIMER · Universal · IP67 · Dust and water resistant · With adjustable runout accuracy · For locating and setting the workpiece zero point · The universal 3D probe can be approached from any direction · In all axes x, y, z, vertically and horizontally · No sign problems: reading the dimensions is direction-independent · For all CNC and erosion machines (insulation between probe insert and collet) · The differential display makes it possible to approach the zero position immediately Laode Ab Ey Hepfx Ahajh · When the display shows zero, the spindle axis is at the probing edge · This allows machine zero points to be reliably set and fixture points to be easily determined · A ceramic breakaway point in the probe insert prevents damage to the workpiece and 3D probe · Display accuracy 0.01 mm · Probe ball diameter 4 mm · Dial indicator diameter 57 mm · Other technical characteristics: Probe ball diameter: 4 mm Collet diameter: 20 mm Overall length: 113 mm (without collet) Degree of protection: IP67 Probe ball diameter: 4 mm Accuracy: 0.01 mm Dial indicator diameter: 57 mm

Condition: excellent (used), Horizontal/vertical rotary table Laedpfx Ajz I A I Ushaoh Chuck: Ø 350 mm Shelf diameter: Ø 400 mm Height without mandrel: 140 mm Total height: 250 mm Base dimensions: Length 430 mm x Depth 370 mm Weight: approx 150 kg Possibility to work horizontally or vertically The increment is done by the front handle

Condition: new, Puller 11-0-A, Clamping range 200mm, Spacing 375mm, 15 t, KUKKO · Three-arm design · With sliding, always parallel puller arms · Made of special steel Lajdpfx Ahs Ab Iw Ieajh · Extra robust design for particularly high loads · Due to the parallel adjustment, the parts always rest on the large bearing surfaces of the puller hooks and are gently removed · The puller can also be used as an internal puller by repositioning the puller hooks. Application: for removing heavy pulleys, gears and similar parts · Can be used as an internal and external puller by reversing the puller hooks · Also suitable for removing asymmetrical workpieces · Further technical characteristics: Weight: 17.99 kg · Material: Special steel Clamping range mm: 375 Clamping depth mm: max. 200 Material: Special steel