Used Beck Serienpacker S1732 for sale (390)

Condition: used, Year of construction: 2007, Foil wrapping machine Nedpoulixqofx Ab Rjlh Hugo Beck CWS 500 Year: 2007 Description: - L-sealer Shrink tunnel

Condition: ready for operation (used), Year of construction: 2008, functionality: unexamined, Beck chain conveyor - as a feeding system for packaging machine SX 1750 - adjustable side guides, height 50 mm - pitch: approx. 575 mm Nljdpfx Abjy H D Tbj Rsh - length: approx. 2,400 mm - working height: approx. 920–1000 mm - overall width: 680 mm - transport rollers and adjustable spindle feet

Condition: ready for operation (used), Year of construction: 1995, functionality: unexamined, total length: 1,860 mm, total height: 1,500 mm, total width: 800 mm, type of input current: three-phase, input voltage: 400 V, input current: 27 A, power: 12 kW (16.32 HP), input frequency: 50 Hz, nominal power: 13 kW (17.68 HP), Thermal Shrink Tunnel HV 400 - Used machine, built in 1995 - Inspected, tested, and fully operational This high-performance shrink tunnel is designed for energy efficiency. The heating system and adjustable settings are highly variable, allowing for precise shrinking of film-wrapped products with various shapes and contours. Operating principle The thermal shrink tunnel operates with separate blowers for independently adjustable upper and lower heating. The machine is equipped with an electronic temperature controller and is designed for a maximum internal temperature of up to 250 °C. The conveyor speed is infinitely variable. Technical data Passage width: 400 mm Passage height: 130 mm Hood length: 1,000 mm Conveyor length: 1,860 mm Rod conveyor: Rotating rods with silicone coating, every second rivet fitted Power supply: 380 V three-phase, 50 Hz Heating capacity: Selectable from 2 - 10 kW Connected load: 12 kW Color: Hammertone light grey Nedpoy H Dxkjfx Ab Rolh Additional equipment: Temperature control with electronic regulator and contactless relay for precise temperature consistency Pressure rollers at the discharge end

Condition: ready for operation (used), Year of construction: 2005, Two Beck MPX 240T are available, control panel: Siemens SIMATIC OP7, with documentation, on machine 1 the Teflon coating of the welding knife is partially damaged and must be replaced, on machine 2 the welding knife may have to be replaced, as well as the cover of the fan of the control cabinet. An on-site inspection is possible. Nlsdpfxewal Igs Ab Roh

Condition: used, No. 3245 Commissioning trolley / paint drying trolley Reinhold Beck Maschinenbau Trapez Used, good condition A total of 9 units available Nljdpfxoxpilxe Ab Rsh For space-saving storage until further processing For lacquered panels, strips or profiles Shelf width 500 - 2000 mm Shelf depth 510 mm 15 shelves, lined with rubber or foam Distance between shelves approx. 78 mm Load capacity per shelf 40 kg (600 kg in total) Mobile, some with brakes Castors in various designs Transport dimensions approx. 800 x 700 x 1850 mm LWH Weight approx. 90 kg Sale on behalf of customer, ex location near 73430 Aalen, without dismantling, transport and assembly Dismantling, loading and transport by us optionally possible Subject to errors in the description and price To avoid possible misunderstandings, an on-site inspection is possible and recommended by appointment Sold as is Technical information, description of condition, year of construction and scope of delivery according to manufacturer's brochure or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded, the following applies: “sold as seen” Pictures and videos serve as examples and do not represent the actual scope of delivery Terms of payment: Prices excl. VAT, payment before collection or dispatch Terms of delivery: ex location

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2011, overall weight: 1,500 kg, Professional grinding table, scissor type with built-in fume and dust extraction. Used in grinding, polishing, soldering, welding and cleaning processes with hand tools. Built-in metal pre-filter, which separates coarse dust particles, metal filings and is designed to capture sparks so that they do not get into the filter (spark catcher). Electrically lifted table. Table equipped with rollers and pneumatic connections for connecting tools. New filter inserts have been installed in the extractor. Built-in table lighting. Device in very good condition. Parameters: Nledpfx Aev Tbaaob Rjh Extraction capacity - 3000 m3/h Negative pressure - 2400 Pa Year of manufacture - 2011 Work table width - 1.90m Work table depth - 0.80m Overall dimensions: Work table: Length - 2.10m Depth - 1.40m Height - 2.30m Extraction: Length - 1.20m Width -1.00m Height - 2.35m Total weight - 1500 kg

Year of construction: 2024, condition: new, Mobile panel transport cart New demo unit, year of manufacture: 2024 - Stacking of panel heights up to 1,600 mm, electrically operated - Tilt angle forward/backward 100°, electrically operated - Head joint rotation angle CW/CCW 180° - Head joint rotation angle: 360° - Load capacity 120 kg - Panel sizes up to 2,100 x 3,200 mm - Total height 2,090 mm - With 6 high-performance suction pads, width adjustable The Mobilifter ML-120 consists of: Nsdew I Upnepfx Ab Rjlh - A mobile chassis - An electric lifting and tilting system - An automatic vacuum unit - A wireless electric control - Weight 170 kg Availability: short notice Location: Flörsheim

Condition: excellent (used), Year of construction: 2008, Description to follow! Nledpeyrhmbofx Ab Rsh

Condition: used, Multi-level gluing press used, good condition Nlodpfx Aevwgggeb Rsh Brand Beck Multi-level press with 7 levels Counter bearing 2 pendulum bearings for diagonal gluing Pressure beam length 1200 mm height 60 mm Working length approx. 1200 mm Clamping depth 780 mm Max. material thickness approx. 60 mm Storage location 97447 Gerolzhofen, free loading, unpacked Handed over in the current condition, as viewed, without guarantee or warranty

Condition: like new (used), Year of construction: 2021, Beck lifting table HS 300 G, electric lift and lower PIVOTING, ADJUSTING EFFORTLESSLY EASY: Sheets can be brought from vertical to horizontal position by a single person without effort using the Schwenkmax. Platform pivot frame with 2-position locking, easily detachable with just a few steps. Ideal for panel handling applications in the woodworking and metalworking sectors. Height adjustment: electric Load capacity: 300 kg Usable lifting stroke: 610 mm Table lift height: 400 mm Nlsdpfxewt Uxzj Ab Rjh Weight: approx. 153 kg 4 swivel castors (wheel Ø 125 mm), 2 with brake Platform pivot frame: 1,800×1,480 mm Maximum overall height: 1,010 mm

Condition: good (used), functionality: fully functional, Price starting from EUR 3,200 The press is ideal for gluing up to 4200 x 500 x 70 mm very practical and very space-saving 15 press cylinders (membrane cylinders) Press stroke per cylinder 70 mm, pressing force per cylinder 6800 N Nljdpfxog Uk Eie Ab Rsh 16 pressure plates Transport dimensions: L 4.5 x W 1.1 x H 0.5 m Weight: approx. 600 kg

Condition: ready for operation (used), Year of construction: 2005, Control system: Siemens SIMATIC OP7. The machine needs to be cleaned and serviced, is otherwise in working order and was in operation until the shutdown. An on-site inspection is possible. Nljdpfx Abswal Imj Rjh

Year of construction: 1991, condition: excellent (used), Manufacturer: Beck Njdpfsmv E Icox Ab Relh Max. throughput: 650x300mm Max. temperature: 350 °C Stepless speed adjustment, forward/reverse. 400V, 50Hz, 28A Enclosure dimensions: 2500 x 1100 x 1500 mm (LxWxH)

Condition: new, Year of construction: 2026, operating hours: 1 h, functionality: fully functional, machine/vehicle number: 02-2026, total width: 2,100 mm, total length: 2,100 mm, total height: 900 mm, overall weight: 800 kg, operating pressure: 60 bar, table height: 770 mm, Work table with pivoting mechanism AWT-250 S – easily bring components to the desired working height with head pressure, without any force, and tilt and rotate them using the integrated pivoting mechanism. Design: electro-hydraulic, Schuko plug 230V, controlled via hand buttons for up/down, lifting – lowering – pivoting. Mounting and pivoting of large and bulky panels, frame parts, and large workpieces can be handled by one person. Max. component size 4000x3000mm, load capacity 250 kg. Working height can be continuously adjusted from approximately 770-1000mm, and the useful stroke is 230mm vertically. Njdpfx Aezwhaqsb Rjlh The center support is 160mm wide and has 2 movable infeed/outfeed rollers on each side, which are automatically retracted at the top and extended at the bottom. The 2 tiltable work surfaces are WxD: 950x2000mm, plus 3 pull-out extensions of +500mm on each side. The total horizontal working area is 2100 x 2000mm; the support surfaces are equipped with brush strips for gentle workpiece processing. In the folded position, the open angle is approximately 32° vertically.

Condition: good (used), Year of construction: 2000, Grinding booth, soundproof booth for grinding operations, suitable for noisy environments. Dimensions: depth 4000 mm, length 9000 mm, height 4 meters, with 2 sliding gates. Nedjzh Nrcepfx Ab Rjlh

Condition: new, Countersink set, DIN 335C, 90 degrees, EUC, 6.3-25mm, HSS special – BECK box · HSS · Special coating · DIN 335 C · 3 cutting edges · Countersink angle 90° · Cylindrical shank · Right-hand cutting · Precision design · Radially ground back · For machining steel, cast iron and non-ferrous metals · Advantages: · Reduction of axial force by 50% (= less feed force) · Reduction of radial force by 25% (= less chatter) · Optimized countersinking through new geometry, prepared cutting edges and the extremely unequal pitch (EUC) · Further technical features: Contents: 5-piece set Nlsdpfj Abziqjx Ab Rsh · Packaging: Plastic box · Ø: 6.3 / 10.4 / 16.5 / 20.5 / 25mm DIN: 335 C Coating: special coating Cutting material: HSS Countersink angle °: 90 Number of cutting edges: 3

Condition: like new (used), Year of construction: 2024, Technical specifications: - Motor power 2.2 kW S1 - Max. Saw blade diameter: 350 mm - Saw blade holder: 30 mm - Cutting time per stroke: 1.5 sec. - Speed ​​on the saw shaft: 3800 rpm - Air consumption per cycle: 5 L - Working table height: 900 mm - Extraction nozzle: 2x100 mm - Operating pressure: 7-8 bar - Net weight: approx. 200 kg - Required air flow 1000 m³ / h Nsdpfx Abofhbuyj Rslh - Voltage: 400 V / 50 Hz 3-phase - Cutting capacity in mm: 45 x 230 60 x 210 90 x 180 100 x 125 Standard basic equipment: - Saw blade feed pneumatic drive - Automatic engine brake - Set of operating keys - Emergency stop push button - Speed ​​control for saw blade feed - Fixed vertical protection device - Upper safety pressure device (pneumatic protective hood) - Suction speed at least 28m / sec. - Colors: basic stand light gray RAL 7035, doors telegrey RAL 7046, protective shield and protective hood zinc yellow RAL 1018

Condition: ready for operation (used), Year of construction: 1998, functionality: unexamined, total length: 1,860 mm, total height: 1,400 mm, total width: 950 mm, Thermal Shrink Tunnel HV 401 LD - Used unit, year of manufacture approx. 1998 - Tested and operational The high-performance shrink tunnel is built in an energy-saving design. Thanks to its flexible heating system and adjustable settings, the machine can reliably shrink-wrap products of various contours with film. Operating principle The thermal shrink tunnel operates with separate blowers for independently adjustable top and bottom heat. It is equipped with an electronic temperature control system and is designed for a maximum internal temperature of up to 250°C. The conveyor speed is infinitely adjustable. Technical data Passage width: 400 mm Passage height: 150 mm Hood length: 1,700 mm Conveyor length: 2,100 mm Rod conveyor: covered with Teflon mesh (as shown in the photos) Njdpfx Aey H Dtujb Rslh Power supply: 380 V three-phase, 50 Hz Heating capacity: adjustable from 2 – 10 kW Rated connected load: 12 kW Color: light grey hammer finish Additional equipment: Temperature control with electronic controller and contactless relay for precise temperature stability

Year of construction: 1988, condition: excellent (used), Manufacturer: Beck Max. throughput: 660x180mm Max. temperature: ca 300 °C Stepless speed adjustment, forward/reverse. 400V, 50Hz, 28A Nsdpfx Asmv Hy Heb Rjlh Enclosure dimensions: 2500 x 1100 x 1500 mm (LxWxH)

Condition: used, functionality: fully functional, 1 unit conveyor belt Overall length: 1,600 mm Overall width: 800 mm Belt widths: 280 mm and 230 mm Working height: approx. 750–950 mm Connected load: 0.37 kW Njdpfx Aey H I I Neb Rjlh Speed regulated: approx. 19 m/min Mobile on castors with brake

Condition: used, 4000 + 5000 mm Working width 250 mm Wheel width 250 mm Nljdpszughhjfx Ab Rjh roll diameter 60 mm work height max. 880 ± 60 mm Feed and Discharge Roller Conveyor Feed Roller Conveyor, Length 4000 mm: * Roller conveyor without scale or stop, with side guides * Conveyor width 300 mm, usable roller width 250 mm Outfeed roller conveyor, length 5000 mm: * Length measuring device with mm scale and reading magnifier on the stop carriage * Measuring track with manual measuring system and a sturdy precision flat steel guide * Conveyor width 300 mm, usable roller width 250 mm

Condition: new, Year of construction: 2017, Exhibition machine Year of manufacture: 2017 Nljdpfjkwg Szsx Ab Rsh (has not yet been used in production) The Compact Star is a pneumatic gluing press with 5 gluing levels. The rotary motion is provided by a pneumatic drive with safety interlocking. Each level has 4 adjustable vertical clamps with an adjustable counter bearing. Each vertical clamp is equipped with a hold-down rail. Furthermore, each level has 2 adjustable horizontal pressure bars with counter bearings. Maximum clamping dimensions: Vertical: 960 mm Horizontal: 1335 mm Material thickness: 50 mm Dimensions: Length: 2700 mm Width: 3117 mm Height: 3096 mm Availability: short notice Location: Röllbach

Condition: ready for operation (used), HUGO BECK horizontal flow wrapper type FLEXO 400 S, pass-through width: 55-400mm, pass-through height: 2-150mm, product length: from 80mm to unlimited, film roll width: 550mm half tube, roll diameter: 350mm, working height: 850mm +/- 50mm adjustable. Machine dimensions: approx. X/Y 2000mm/1450mm. Inspection possible by appointment. Nlsdpfx Abjxt Rk Rs Reh

Condition: as good as new (ex-display), Year of construction: 2008, *SALE WITHOUT ROLLER CONVEYOR Technical description with the following main data: Load capacity 1000 kg static line load effective stroke 830 mm Overall height 180 mm Total height 1010 mm Platform length 1300 mm Platform width 800 mm Nlodpfxsupzwas Ab Roh Material smooth sheet metal Lifting time approx. 18 sec. for the full effective stroke Lowering time load-dependent Electrical connection 3 x 400 V/ 50 Hz + protective earthing, with 16 A CEE plug and 3 meter cable Motor 0.75 kW, 1,400 rpm. Valve voltage 24 V DC Sealing degree IP 54 general, solenoid valve and switch IP65 Power unit position integrated in the lift table Control box dead man's control incl. 2 m cable Total weight approx. 175 kg* incl. limit switch and thermal fuse up to 2.2 kW motor - Switch for up/down and manual operation is integrated in the control box

Year of construction: 2004, condition: ready for operation (used), Operational hours counter: ca. 14,000h. Nsdpeh Dw Tvofx Ab Rslh