Used Bezel Bottom for sale (3,103)

Condition: ready for operation (used), Year of construction: 2007, functionality: fully functional, machine/vehicle number: 17405, travel distance X-axis: 550 mm, travel distance Y-axis: 410 mm, travel distance Z-axis: 450 mm, workpiece weight (max.): 10,000 kg, spindle speed (max.): 15,000 rpm, number of slots in tool magazine: 240, No minimum price – guaranteed sale to the highest bidder! Bidding obligates the winner to pick up the machine between September 21st and October 1st! TECHNICAL DETAILS Travel range, X-axis: 550 mm Travel range, Y-axis: 410 mm Travel range, Z-axis: 450 mm Travel range, B-axis: -110 to +110° Travel range, C-axis: 360° Distance from pallet surface to spindle center: -20 to 430 mm Distance from B-axis center to spindle center: -40 to 410 mm Distance from B-axis center to spindle center: -20 mm Distance from pallet center to Z zero point: 265 mm Distance from pallet center to Y zero point: 180 mm Pallet Work area on the pallet: Ø 130 mm Pallet load capacity: 40 kg Max. workpiece size: Ø 250 × 250 mm Pallet mounting surface: 4 × M12 × 1.75 Distance from pallet bottom to pallet surface: 970 mm Pallet indexing, B/C-axis: 0.001° / 0.001° Pallet change time, B-axis: 1.2 s/90° Pallet change time, C-axis: 0.9 s/90° Pallet change time, C-axis: 1.2 s/180° Pallet change time, C-axis: 1.4 s/270° Pallet torque, B-axis: 1,070 Nm Pallet torque, C-axis: 192 Nm Pallet braking torque, B-axis: 1,112 Nm Pallet braking torque, C-axis: 500 Nm Spindle Spindle speed: 50 to 15,000 rpm Spindle speed change: 5-digit direct S-command Tool interface: SK 40 Spindle taper: 7/24, Taper No. 40 Spindle bearing inner diameter: 70 mm Max. spindle torque: 65.1 Nm at 1,100 min⁻¹ Spindle air blow: Standard Spindle orientation: Standard Tool clamping force: 7.0 kN Tool Changer Tool magazine capacity: 240 positions Tool shank: JIS B 6339, tool shank 40T Pull stud type: JIS B 6339, pull stud 40P Max. tool diameter: 80 mm Max. tool diameter with free auxiliary stations: 150 mm Max. tool length: 300 mm Max. tool weight: 10 kg Tool selection: Fixed address system Tool change arm: W-gripper type Feed Rates Rapid traverse rate, X/Y/Z-axis: 50 m/min Rapid traverse rate, B-axis: 30 min⁻¹ Rapid traverse rate, C-axis: 50 min⁻¹ Feed rate, X/Y/Z-axis: 1 to 50 m/min Feed rate, B-axis: 30 min⁻¹ Feed rate, C-axis: 50 min⁻¹ Rapid traverse acceleration, X/Y/Z-axis: 0.6 G Rapid traverse acceleration, B/C-axis: 2,500 / 2,000 °/s² Max. acceleration during cutting feed, X/Y/Z-axis: 0.4 G Max. acceleration during cutting feed, B/C-axis: 2,000 / 4,000 °/s² Tipping feed rate, X/Y/Z-axis: 0 to 4000 mm/min Tipping feed rate, B/C-axis: 0 to 11.11 min⁻¹ Min. movement increment, X/Y/Z-axis: 0.001 mm Min. movement increment, B/C-axis: 0.001° Nwjdpfszqunhsx Aqujk MACHINE DETAILS Control: MATSUURA G-TECH 840 DI Serial number: 350536 Electrical Connection Values Rated apparent power: 36 kVA Input voltage: 415 V Input frequency: 50 Hz Input current: 50 A Dimensions and Weight Overall length: 6,000 mm Overall width: 5,000 mm Overall height: 3,500 mm Overall weight: 15,000 kg EQUIPMENT - Chip conveyor - Coolant system - Tool holders on the tool changer External Reference: Hanon - Lot 1

Condition: good (used), Year of construction: 2019, functionality: fully functional, workpiece height (max.): 60 mm, workpiece width (max.): 60 mm, workpiece length (max.): 150 mm, edge thickness (max.): 3 mm, height adjustment type: mechanical, feed rate X-axis: 18 m/min, actuation type: electric, total height: 1,468 mm, total length: 4,412 mm, total width: 1,511 mm, Very well-maintained and regularly serviced. TECHNICAL DETAILS Workpiece height: max. 60 mm Workpiece width: max. 60 mm Workpiece length: max. 150 mm Edge thickness: max. 3 mm Processable edge materials: ABS, PVC, veneer strip, solid edge strips Feed and Operation Feed rate X-axis: 18 m/min Height adjustment: mechanical Type of operation: electric MACHINE DETAILS Data recorded as of March 20, 2026 Main switch – total operating time: 9,720 h 57 min 06 s Chain drive – total operating time: 1,216 h 19 min 51 s Njdpfxjzv Rcre Aquswk Total number of workpieces: 91,356 pieces Total workpiece length: 63,904.7 m Overall height: 1,468 mm Overall length: 4,412 mm Overall width: 1,511 mm EQUIPMENT - Smartouch touchscreen control - Program settings with memory function - Release agent - Pre-milling unit - Radius cutter, top and bottom - Corner rounding unit - Radius trimming unit - Flat trimming unit - Adhesive remover - Polishing unit - Automatic feed

Condition: excellent (used), Catalogue number 7340 TECHNICAL DATA - spindle diameter: 25mm - spindle working height: 120mm - exchangeable spindle - spindle locking - height adjustable up/down - original cast iron fence with full adjustment - 4 spindle speeds + right/left rotation - table dimensions: 1030x900mm - motor: 3.8kW - overall dimensions (L/W/H): 1030x1000x1080mm Nodpsztznaefx Aquewk - weight: 614kg ADVANTAGES – manufactured in Poland – very good condition – used milling machine Net price: 6,900 PLN Net price: 1,640 EUR depending on the exchange rate of 4.2 EUR (Prices may fluctuate due to exchange rate changes)

Condition: good (used), Year of construction: 1999, functionality: fully functional, machine/vehicle number: 034108905, BOBST 100 II - A2 folding and gluing machine, manufactured in 1999. This efficient machine is designed for the production of straight-line packaging and packaging with a crash-lock bottom, handling cardboard and corrugated board. It features 6 cold glue applicators and one hot glue applicator. It also has a wheel-fed glue system with a container. It glues at 6 points – with various glue application methods. It includes a cassette for gluing envelopes. The HHS system in this version is very good – it can be used to produce envelopes, Advent calendars, and boxes. The machine can be inspected at our printing facility in Szczecin. Nsdezwmvqspfx Aquewk

Condition: excellent (used), Year of construction: 2017, operating hours: 627 h, functionality: fully functional, total length: 6,900 mm, total height: 1,800 mm, total width: 1,600 mm, type of input current: three-phase, input voltage: 400 V, input current: 62 A, passage height: 300 mm, overall weight: 1,200 kg, passage width: 800 mm, input frequency: 50 Hz, nominal power (apparent): 43 kVA, throughput speed: 20 mm/s, temperature: 250 °C, Equipment: documentation/manual, BVM SC 8530 D3 Shrink Tunnel – Year of manufacture 2017 – approx. 627 operating hours For sale is a BVM shrink tunnel SC 8530 D3, manufactured in 2017, in technically perfect and visually very good, well-maintained condition. The system has only approximately 627 operating hours and is suitable for shrinking packaging films using hot air circulation. The adjustable tunnel transport, as well as the adjustable side and bottom air flow, allow the shrinking result to be adapted to different products and films. Technical data Manufacturer: BVM Brunner GmbH & Co. KG Type: SC 8530 D3 Year of manufacture: 2017 Machine no.: 20170962241 Consignment no.: 6224 Operating hours: approx. 627 h Mains voltage: 3N 400 V Mains frequency: 50 Hz Current consumption: 62 A Power: 43 kVA Fuse rating: 63 A Max. passage width: 800 mm Max. passage height: 300 mm Transport speed: approx. 1.2 m/min at 50 Hz Working temperature: 110–250 °C Suitable for film types up to 100 µm External dimensions L × W × H: approx. 6,900 × 1,600 × 1,800 mm Total weight in operating condition: approx. 1,200 kg Sound emission: ≤ 75 dB(A) Equipment / Functions Hot air circulation Adjustable tunnel transport Temperature control Adjustable side air flaps Adjustable bottom air flow Heating fan Cooling fan Electronic preset counter Emergency stop device Cooling automatic Clean and clearly structured control cabinet Original operating manual available Condition The system is in perfect technical condition and is also in very good and well-maintained visual condition. Nwjdpfxezwk T Ts Aqujk With only approximately 627 operating hours, the machine has very low mileage. Price €22,000 (negotiable) Inspection possible by arrangement. Further information and pictures available on request. Subject to prior sale and errors.

Condition: used, Year of construction: 1999, functionality: fully functional, machine/vehicle number: 990616/RC2, working width: 1,350 mm, Equipment: CE marking, documentation/manual, SECOND-HAND TOP AND BOTTOM CALIBRATING AND SANDING LINE COSTA Line set up: - Bottom 3-group calibrating and sanding machine Costa mod. KB / CCT1350 Nwedjzcmm Iopfx Aquok Matr. 990616 / RC2 * Roller diam. 400 mm - 22 kw * Roller diam. 400 mm - 15 kw * Sectioned cnc sanding pad - 11 kw - Top 3 groups calibrating and sanding machine Costa 3 groups Costa mod. K2 / TRCCT1350 Matr. 990616 / RC3 * Roller diam. 400 mm - 22 kw * Roller diam. 400 mm - 15 kw * Sectioned cnc sanding pad - 11 kw - Device for short pieces - Vacuum device - Working width 1350 mm - Connection conveyor - CE rules (year 1999) - With CE declaration and manuals

Condition: used, Bezel, stick, lynette -Bottom parts: different sizes Njdpfxjdl U Nfo Aqujwk -Price: on request -Number: 4x bezel lower parts available -Price: per piece -Dimensions: -Weight: kg

Condition: ready for operation (used), Year of construction: 2009, functionality: fully functional, height adjustment type: mechanical, RM Group Spindle Moulder (Under Spindle) Specification: • Condition - used, fully serviced • Manufacturer - RM Group • Model - SM 110 • Spindle diameter 30 mm • Motor power 4 kW • Star-delta motor starter • 3 belt-regulated spindle speeds: 6,000 / 8,000 / 10,000 rpm Nsdpfx Aqsw Avxbjujwk • Manual up/down adjustment • Original paintwork • Extraction port - 120 mm • Year of manufacture - 2009 • Weight - 360 kg • Dimensions: 112 x 75 x 115 cm (L x W x H) Additional information: • Very good, factory technical and visual condition • The presented photos show the actual condition of the item for sale • Possibility to connect and test the machine on site

Condition: used, Type Combi 12110 TF continuous grilling line all stainless steel bottom contact grilling + hot air suitable for steam injection belt width 1.100 mm net length 11.000 mm underplate max. 260°C air temperature max. 280°C dimensions (l x w x h) : ± 13.500 x 1.700 x 2.400 mm Nwodpfezw D Nzsx Aquok independent platen – air temperature and steam control adjustable speed PLC control Siemens frequency (new hard- and software, frequency inverters) With new Teflon belt suitable for thermic oil heating (± 600 kW) with belt wash system

Condition: new, Year of construction: 2024, operating hours: 10 h, functionality: fully functional, machine/vehicle number: 36AMG, compressed air connection: 6 bar, working width: 360 mm, warranty duration: 12 months, operating speed: 250 mm/s, Komfi Laminator Amiga 36B (Bottom Suction Feeder) New, Manufactured 2024 Specifications: Max. speed of lamination 15 m/min Min. sheet dimensions 20 × 20 cm Max. sheet dimensions 36 × 70 cm Paper weight/Paper thickness 115-350 g/m² / max 0.5 mm (with overlap > 0) / max 1 mm (with overlap < 0) Max. paper pile 6 cm (depending on sheetlenght) Thickness of laminating film 24-50 μm Kind of laminating film OPP, PET, Nylon, PVC Time of laminating roll warm up Approx 3.5 min Sheet overlap accuracy ±1 mm Machine dimensions incl. table 230 × 79 × 152 cm Air supply requirements Min. 6 bar Consumption of compressed air 20 l/min Max. consumption of compressed air 30 l/min Nwedszh N Dlepfx Aquek Max. pressing force 12.8 kN = 1.3 ton-force Max. linear nip pressure 35,5 N/mm Max. consumption of electricity 6 kW Power supply 6 kVA Machine weight 332 kg Recommended machine capacity 100 000 sheets/month Feeder: Bottom Suction Vacuum Feeder Laminating Unit: ”On-the-fly” side-adjustable unwinding shaft with adjustable brake force. Height-adjustable and removable spread roller perfectly removes wrinkles from laminate. IR heating for laminating cylinder. Temperature sensor inside the cylinder for precise regulation. Rubber coated pressure roller. Adjustable distance stoppers for lamination unit to enable processing thick substrates and windows lamination. The powerful pneumatic pressure system guarantees even nip pressure and perfect lamination results. Separator & Delivery: Decurling unit consisting of bar and roller elements to reach flat result also for difficult thin or duplex sheets. Built-in film perforator to enable sheet separation. Cam-driven separation roller with adjustable tearing action, delivery roller and sheet skewing wheel. Fixed delivery desk.

Condition: excellent (used), functionality: fully functional, Year of construction: 2000, 1x Thyssen container, folding-bottom container, bottom discharge container, box, tipping container 20 units available! External dimensions: 135x115x87cm Internal dimensions: 120x100x70cm (0.85 m³) Hot-dip galvanized Stackable Very good condition, see pictures Nwjdpfx Ajzckfhjquok Collection only by appointment in 75053 Gondelsheim Forklift available for loading Shipping via freight forwarder possible, please inquire with your postal code.

Condition: used, Year of construction: 2007, total length: 5,810 mm, total width: 1,980 mm, total height: 1,540 mm, Colour: Blue Empty weight: 11.500 kg Price: On request - Year: 2007 - Documentation available: No - CE marking present: Yes - CE certificate present: No - Serial number: 600007090 - Drive system: Conventional - Drive: Hydraulic - Number of rolls [pcs.]: 4 - Number of driven rolls [pcs]: 2 - Power [kW]: 15.0 - Max. sheet thickness [mm]: 13 - Max. prebending thickness [mm]: 10 - Max. working width [mm]: 3100 Nedpfxjzw A Suo Aqujwk - Top roll diameter [mm]: 280 - Bottom roll diameter [mm]: 280 - Bending speed [mm/min]: 5000 - Options: Cone rolling, Digital readout - Transport dimensions: 5815mm x 1985mm x 1540mm (l x w x h) - Transport weight [kg]: 11500kg - Transport packages [pcs.]: 2 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: excellent (used), Year of construction: 2021, operating hours: 3,500 h, functionality: fully functional, machine/vehicle number: 2021-1504-QN, High-end metal separator for inspecting bulk materials in free fall Material: stainless steel 304 Surface: sandblasted Sensing tube material: PE, anti-static, food grade Rejector: single flap type RH Protection rating: IP66 Electronics assembly: detached Control electronics cable length: 3 m Nominal width: 150 mm Orientation: vertical, top to bottom Power supply: 100-240VAC 50-60Hz LNPE - Without power cable Pressurized air supply: 6-10 bar Expected sensitivity: FE: 0.4 mm NE / Al: approx. 0.4 to 0.56 mm Stainless steel: approx. 0.4 to 0.72 mm Electronics outside ATEX Zone Inside: Zone 20 within metal separator (pipe) = II 1 D Ex h IIIC T135°C Da Outside: Zone 22 surrounding metal separator Nwodpfxezvwlme Aqusk = II 3 D Ex tc IIIC T135°C Dc IP65 QUICKTRON 07 RH metal separators are used for inspecting powders and granules in free-fall lines. They are available in nominal widths up to 300 mm and can therefore cover all application areas, from the laboratory to truck loading. Their hygienic design and easy cleaning prevent cross-contamination between product batches. Depending on the requirements, they can increase process safety or fulfill the task of outgoing goods inspection. Mesutronic metal detectors use state-of-the-art technology to protect your production, your reputation, and your customers from damage caused by metallic foreign objects. Digital signal processing, combined with innovative evaluation methods, comprehensive self-monitoring, and ease of operation, ensure the optimal function of the system and the successful completion of all types of audits. The devices are complemented by an extensive range of accessories and variants, from multi-frequency technologies to test bodies and material certificates. The machine was in operation at an R&D center in Israel. As the company now operates a production facility in Europe, the R&D center will be closed. The machines will be transported to Europe at the owner's expense and can be delivered EXW at a port or in the production plant in Europe. The details for optimal transport need to be clarified. The machine price does not include packaging.

Condition: as good as new (ex-display), Year of construction: 2025, functionality: fully functional, New machine, immediately available, 12 months warranty -Internal dimensions (w x d x h): 1250 x 4000 x 1450 mm -External dimensions (w x d x h): 1900 x 4900 x 2500 mm -Power consumption: 240 kW -Current consumption: 350 Amperes -Maximum temperature: 1300 °C -Oven weight (approx.): 6000 kg -Control system: JUMO IMAGO 500 -Software packages: (OPCA & PCC) -Display unit: JUMO Logoscreen 601 -Includes: feedthrough hole and 6 additional slots for recording type K customer thermocouples -Multi-zone design (3 zones) -Switchgear with solid-state relays -Climate control for the switchgear -Automatic inlet and outlet dampers -Controlled cooling system (including frequency converter, controlled via the control system) -Electrically driven furnace car Nodoy Avmlopfx Aqujwk -Maximum load: 3.5 tons -Swinging door -Documentation, CE declaration We would be happy to offer installation, commissioning, and training for your employees. Please contact us! We stock new and used industrial furnaces. Inspections in our warehouse are possible upon request. Furnace car oven, car hearth oven, furnaces, annealing furnace, firing furnace, hardening furnace, heat treatment furnace, oven, stress-relieving furnace, enamelling furnace, drying oven, industrial furnace, bogie hearth furnace, car hearth furnace, shuttle kiln, bogie hearth kiln

Year of construction: 2019, condition: used, We are offering this used German Kiln Technology HERDWAGENOFEN car kiln, year of manufacture 2019. Reference number: 118004 Year of manufacture: 2019 Operating voltage: 3 × 400 V Current: 64 A Frequency: 50 Hz Fuel: natural gas Calorific value: 10.3 kWh/Nm³ Thermal output: 1650 kW Nwodpfx Asycvxmjquok Gas operating pressure: 8 kPa Air operating pressure: 10 kPa Air preheating: 550 °C Kiln temperature: 1500 °C TNV temperature: 930 °C Usable volume: 4.3 m³ If you have any questions or require further information, please feel free to send us a message or call us.

Condition: used, Technical specifications: Saw blade diameter: 450 mm Automatic saw feed Nwodpfx Aqjzh Hd Ajujk Max. cutting height: 150 mm Table length: 2890 + 3350 mm Table width: 540 mm Table with rollers Roller diameter: 60 mm Ability to cut at a 90-degree angle Power supply: 400 V Motor power: 4 kW Overall dimensions: Length: 7000 mm Width: 950 mm Height: 1250 mm

Condition: used, Year of construction: 2001, functionality: fully functional, machine/vehicle number: AA0985, input voltage: 400 V, SECOND-HAND TOP AND BOTTOM WIDE BELT SANDER SAC MOD. 4R 300 - CE RULES - Working width mm. 300 - Max. working height mm. 150 Nwsdpfxex Riccj Aqujk - Min. height mm. 5 - Min. piece lenght mm. 240 mm. - N. 2 top rollers -. diam. 254 mm. - N. 1 top brush - N. 2 bottom rollers - diam. 254 mm. - N. 1 bottom brush - Feeding speed 4-16 m/min. - N. 4 motors kw 4 each - Volt 400/50 - S/N AA0985 - Year 2001

Condition: like new (used), Set of 3 Industrial Vacuum Cookers – Stainless Steel Set of 3 industrial vacuum cookers made of stainless steel, designed for cooking, heating, and processing food products under controlled vacuum conditions. The set consists of three process vessels installed on a common frame with an elevated work platform, providing a robust solution for industrial batch production. Vacuum processing allows for cooking and concentration operations at reduced pressure, enabling operation at temperatures lower than those used in conventional atmospheric processes, depending on the product and recipe. MAIN FEATURES -Quantity: 3 vacuum cookers -Type: Industrial vacuum cooking/processing system -Application: Cooking, heating, and processing of food -Robust construction in stainless steel -3 independent process vessels -Configuration for batch production Nwedpfx Aezwv Ipoqusk -Integrated piping and valve system -Vacuum processing -Bottom product discharge -Individual drive systems -Inspection/access hatches -Stainless steel work platform -Guardrails and access system -Designed for professional food processing environments -Integrable into complete production lines APPLICATION The system is designed to process food products in closed vessels under vacuum conditions. Working at reduced pressure allows the cooking and heat treatment conditions to be adapted to the characteristics of each product. The configuration of three vessels also provides high flexibility for managing different batches or production stages within the same facility. Depending on the product, it can be used for: Vacuum cooking Heating and heat treatment Concentration Mixing and homogenization Reduction of liquid products Sauce production Processing of fruits and vegetables Preparation of fillings and formulated products APPLICATIONS Especially suitable for food manufacturers, sauce and condiment producers, fruit and vegetable processors, prepared meal manufacturers, and industrial kitchens. Depending on its configuration, it can be used to produce sauces, jams, preserves, fruit preparations, vegetable products, fillings, concentrates, and prepared meals. The configuration of 3 industrial vacuum cookers offers a particularly interesting solution for facilities that require production flexibility and simultaneous processing of different batches. Machine available for inspection. Additional technical information, dimensions, additional photographs, or videos can be provided upon request.

Condition: used, Year of construction: 2005, functionality: fully functional, machine/vehicle number: 8481-05-K951, Edge finishing with fine grinding We used this machine to process stair treads. 6 processing units: 1 x coarse grinding of the surface 2 x fine grinding of the surface Nwjdpfxszv Eaxe Aquek 3 x profile milling on the top 4 x profile milling on the bottom 5 x profile grinding on the top 6 x profile grinding on the bottom Automatic feed – speed can be adjusted continuously Material thickness sensor The machine is equipped for processing stair treads with an edge rounding of r=8mm on the top and bottom (individually controllable). After cutting the treads to size on the circular saw or CNC machine, we completed the processing of the treads in a single pass from the top and bottom. The machine can also be adapted for other profiles, radii, or milling operations.

Condition: used, Technical specifications: Max. grinding width: 300 mm Grinding unit with shoe Pneumatic belt tensioning Working pressure: 6 bar Nodpoziagyofx Aquewk Work table length: 1250 mm Built-in fan Fan motor power: 0.7 kW Motor power: 5 kW Overall dimensions: Length: 1300 mm Width: 850 mm Height: 1300 mm

Condition: as good as new (ex-display), Year of construction: 2025, functionality: fully functional, New unit, in stock, immediately available -Volume 18,000 liters -Maximum temperature 350°C -Internal dimensions (L x W x H) 4100 x 2100 x 2100 mm -External dimensions (with rails) 9970 x W 3060 x H (with lifting door) 6110 mm -Control system Eurotherm Nanodac -Temperature stability (at nominal temperature, without load) ±5 °C -Automatic inlet and outlet dampers -Electric lifting door -Electrically driven furnace car -Power 247 ± 9% kW -400 V, 50 Hz -Documentation, CE declaration Nwsdeu Hma Nspfx Aqujk We would be happy to offer installation and commissioning, as well as training for your employees. Please contact us! We offer new and used industrial furnaces. Inspections in our warehouse are available upon request! Furnace, kilns, annealing furnace, firing furnace, hardening furnace, heating furnace, furnace, tempering furnace, sintering furnace, drying oven, industrial furnace, heating chamber, warming oven, temperature furnace, drying cabinet, chamber furnace, large-capacity furnace, bogie hearth furnace, car hearth furnace, shuttle kiln, bogie hearth kiln.

Condition: used, cooking length 4.000 mm belt width 800 mm all stainless steel suitable for steam heating temperature measurement 4 zones Nwsdezw D Rlepfx Aquek steam injection per zone (4 zones) air circulation per zone from bottom to top through the belt dimensions (l x w x h) : ± 6.200 x 1.700 x 2.200 mm adjustable speed

Condition: excellent (used), Catalogue No. 6747 TECHNICAL DATA - Maximum planing width: 170 mm - Maximum planing height: 130 mm 7 spindles: 1) Bottom horizontal spindle: 170 mm, 4 kW 2) Right vertical spindle: 130 mm, 5.5 kW 3) Left vertical spindle: 130 mm, 5.5 kW 4) Additional right vertical spindle: 130 mm, 5.5 kW 5) Top horizontal spindle: 170 mm, 4 kW - 5th spindle with electric height adjustment Nwodpfx Aqozwwmaeuek 6) Additional bottom horizontal spindle: 170 mm, 5.5 kW 7) Universal spindle: 170 mm, adjustable up to 180°, 7.5 kW - Spindle diameter: 35 mm (all spindles) - All spindles adjustable vertically and horizontally - Top: 6 powered feed rollers (toothed), including 2 double rollers - Top: 4 outfeed rubber rollers - Pneumatically pressed rollers - Side pressure roller included - 2 guide rails in the table - Electrically adjustable planing thickness: 0.37 kW - Infeed table length: 2,480 mm - Stepless feed speed adjustment - Feed motor: 2.2 kW - Extraction port diameters: 1 x 135 mm, 5 x 120 mm - Dimensions (LxWxH): 5,550 x 1,900 x 1,660 mm - Weight: approx. 3,500 kg FEATURES – Made in Germany – Equipped with 7 cutterheads – Universal spindle – Used planer, in very good condition Net price: 27,900 PLN Net price: 6,640 EUR Net price calculated at exchange rate 4.2 PLN/EUR (price may change with significant exchange rate fluctuations)

Condition: excellent (used), Catalog number 7308 TECHNICAL DATA - Track width: 250 mm - Roller width: 350 mm - Roller diameter: 80 mm Nsdjzww A Ijpfx Aquswk - Max. saw blade diameter: 400 mm - Saw blade bore diameter: 80 mm - Max. cutting height: 150 mm - Table width with clearance: 700 mm - Table length: 1790 mm Top, in order: - Pawls - Pressure roller, slip type - Pawls - Pressure roller, smooth type - Roller with saws - Smooth pressure roller, 2 pcs Bottom: - Guide strip - Smooth slip roller - Pawls - Track Infeed table: - Roller width: 500 mm - Number of rollers: 3 pcs - Total dimension of infeed table (L/W/H): 580x530x900 mm Outfeed table: - Roller width: 500 mm - Number of rollers: 6 pcs - Total dimension of outfeed table (L/W/H): 1210x535x900 mm - Centralized lubrication - Stepless feed speed adjustment - Main motor: 37 kW - Extraction nozzle diameter: 140 mm - Overall dimension of the multi-blade saw (L/W/H): 2000x1450x2000 mm - Total weight approx. 3000 kg ADVANTAGES – German manufacturing – High cutting height – Infeed and outfeed tables – Used multi-blade saw, in very good condition Net price: 46,900 PLN Net price: 11,160 EUR Net price calculated at an exchange rate of 4.2 PLN/EUR (The price may change in case of significant exchange rate fluctuations)

Condition: excellent (used), Year of construction: 2000, functionality: fully functional, working width: 1,350 mm, TOP AND BOTTOM CALIBRATING LINE DMC MOD. UNISAND 2000–1350 – CE RULES Bottom machine: - Vacuum lifting device for conveyor belt - N. 2 bottom sanding belts - Steel roller - Rubber roller - Brush - On/off devices - Blowers Njdpfsywgqkjx Aquowk - Shoe pressers - Working width 1350 mm - Year 2000 - Complete with manual and CE declaration Top machine: - N. 3 top sanding belts - Steel roller - Rubber roller - Pad - Brush - On/off devices - Blowers - Shoe pressers - Vacuum device - Year 2000