Used Bhk-Tech Mw 50 for sale (38,063)

Condition: used, Year of construction: 2003, CLAMPING UNIT Clamping force: 500 kN Locking force: 500 kN Distance between tie bars: 370 x 370 mm Max. opening stroke: 400 mm Min. mould height: 210 mm (160 / 135 mm with ZE 214) Max. distance between platens: 610 mm (660 / 710 mm with WA 211) Platen size (H x V): 540 x 530 mm Dedpsz D U Ixofx Akmjku Max. mould weight: 580 kg Max. mould weight on moving platen: 380 kg HYDRAULIC EJECTOR Ejector stroke: 125 mm Ejector force: 41.2 kN Ejector retraction force: 14.8 kN INJECTION UNIT (200) Screw diameter: 30 mm L/D ratio: 20 Injection pressure: 1900 bar Stroke volume: 106.0 cm³ Shot weight (PS): 94 g Max. dosing stroke: 150 mm Barrel heating power: 8.3 kW Hopper capacity: 20 l INJECTION UNIT – HORIZONTAL Max. nozzle stroke: 361 mm Nozzle penetration depth: 40 mm Nozzle contact force: 60 kN INJECTION UNIT – VERTICAL (parting line injection) A min / A max: 100 / 300 mm B min / B max: 100 / 468.5 mm Max. nozzle stroke: 368.5 mm Nozzle contact force: 15 kN GENERAL Oil tank capacity: 180 l Pump motor: 18.5 kW Total installed power: 26.8 kW Dry cycle time (EUROMAP 6a): 1.80 s – 224 mm / 1.80 s – 259 mm Net weight (without oil): 3400 kg Dimensions horizontal (L x W x H): 3.9 x 1.2 x 2.0 m Dimensions vertical (L x W x H): 3.9 x 1.2 x 3.4 m Noise level (idle / full load): 56 / 71 dB(A)

Condition: good (used), Year of construction: 2009, clamping force: 1,500 kN, Equipment: documentation/manual, ENGEL VC 1050/150Tech Screw: Ø 50 mm CLAMPING UNIT Clamping force: 1500 kN Opening stroke: 607 mm Ejector stroke: 150 mm Ejector force: 61 kN DRIVE Dkjdsy Rn E Aepfx Akmou Pump drive power: 30 kW INJECTION UNIT 1 Screw diameter: 50 mm Max swept volume: 422 cm³ Screw speed max: 250 r/min Screw speed current: 250 r/min Injection rate: 210 cm³/s Injection rate incr.: 165 cm³/s Spec. inj. pressure: 1955 bar Spec. inj. pressure+: 2332 bar Nozzle stroke: 350 mm Nozzle cont. pressure: 67.2 kN

Condition: good (used), Year of construction: 2008, Manufacturer: EBG-TECH Type: BMW N-63 Year: 2008 Dkedpfjf Ecwzox Akmju Max. disk diameter: 300 mm Overall size: 1900 x 1200 x 2900 mm Weight: 1750 kg

Condition: excellent (used), Year of construction: 2009, functionality: fully functional, machine/vehicle number: 70000121, number of ink cartridges: 6, color channels: 6, number of print heads: 8, resolution (max.): 360 dpi, paper width (min.): 400 mm, paper width (max.): 2,800 mm, paper height (min.): 400 mm, paper height (max.): 3,700 mm, type of input current: three-phase, input voltage: 400 V, Equipment: documentation/manual, raster image processor, DIP-TECH GlassJet PRO 16PH – Industrial Digital Glass Printer A professional solution for digital ceramic ink printing, designed for medium to large-scale glass processing facilities. Digital Ceramic In-Glass Printing: Technology that makes the print as permanent and durable as the glass itself. Design Flexibility: Capable of printing photorealistic images, vectors, textures, and imitations (e.g., sandblasted glass effect). Robust Construction: The roller conveyor system (flatbed gantry) ensures maximum precision even with heavy glass loads. General Specifications: Manufacturer: Dip-Tech Model/Type: GlassJet PRO 16PH Serial Number: 70000121 Year of Manufacture: 2009 Number of Print Heads: 8 installed (expandable up to 16) Ink Type: Digital ceramic ink (requires tempering/firing after printing) Control Language: English Dedpfey Ia E Ajx Akmeku Maximum Glass Size: 2800 x 3700 mm Minimum Glass Size: 400 x 400 mm Glass Thickness: 2–19 mm Performance & System: Print Resolution: Up to 360 dpi Number of Color Channels: 6 channels (BGWORK: Blue, Green, White, Orange, Red, Black) Control Software: GlassJet Operating System / Durasst RIP Print Head Type: Spectra Nova Transport System: Automatic roller conveyor Condition: The machine is in very good visual and technical condition, regularly maintained through its control system. It is sold with all accompanying documentation and technical drawings. A set of spare parts is also available upon request.

Year of construction: 2006, condition: ready for operation (used), Specification Detail Die cutting and stripping unit Max. Sheet Size 1050 x 750 mm Min. Sheet Size 450 x 370 mm Max. Die Cutting Area 1040 x 730 mm Dedpfxeyha N He Akmeku Max. Speed 7,500 sheets per hour Max. Pressure 250 tons Stock Range 100 gsm paper to 2000 gsm cardboard; up to 3 mm corrugated board Min. Gripper Margin 4 mm Machine Weight 18,000 kg

Condition: new, capacity 90 degrees: round 350 mm capacity 90 degrees: square 330 mm 500 x 310 band speed 15 - 100 m/min table height 844 mm dimensions of saw-band 4250 x 34 x 1,1 mm Dkjdpsfg E Hlsfx Akmou total power requirement 2,2 kW weight of the machine ca. 1,2 t dimensions of the machine ca. 1,4 x 2,4 x 1,935 m ACTION PRICE!!! 2-column double miter band saw K-tech DG 50/33 HA-I • 2-column miter saw • Solid, yet easy to use • Material height sensor (automatic cut start detection) • Smooth running thanks to bevel cut, feed controller + cutting pressure controller • Massive material infeed roller • Removable chip tray (disinfection) • Energy-saving and low-vibration thanks to bevel cut • Ergonomic, safe and free-standing control panel • Frequency-controlled saw drive 15 -100 m/min. • Hydraulic cutting pressure control valve • Hydraulic control of saw frame and vice • LEDs for monitoring all safety functions • Large dimensioned wheels (520 mm) a. • Clear miter setting up to 60° Semi-automatic function: 1. Clamp material 2. Saw starts 3. Rapid lowering to the start of the material or the same for series cutting cut 4. Saw band off 5. Raise the frame to just above the material 6. Open the vise

Condition: new, Year of construction: 2025, turning diameter: 410 mm, – Centre distance: 1500 mm – Swing diameter over bed: 410 mm Dkedpfxeytadns Akmsu – Swing diameter over gap: 580 mm – Swing diameter over cross slide: 255 mm – Spindle bore: 52 mm – 45–1800 rpm – Longitudinal and cross feed – Digital readout – Brake – Coolant system – Lighting – Safety guard – Fixed steady rest – Travelling steady rest – Three-jaw chuck – Four-jaw chuck – Multifix toolpost with 4 holders – Emergency stop – Documentation – 400V

Condition: ready for operation (used), Year of construction: 2012, operating hours: 73,164 h, General Data Machine weight 19400 kg Measurements height 2300 mm Dimensions Machine Length 5861 mm Dedpfx Aex Nr Rtekmeku Injection Unit Screw diameter 60 mm Clamping Unit Clamping force 2600 kN This Engel VICTORY 1350/260 tech was manufactured in 2012. It features a clamping force of 260 tons, a maximum injection volume of 735 cm³, and a screw diameter of 60 mm. The machine dimensions are 5,861 × 1,923 × 2,300 mm, and it weighs 19,400 kg. Currently in production with excellent condition and 73,164 operating hours. Contact us for more information about this machine. Application Types Injection Moulding

Condition: as good as new (ex-display), Year of construction: 2025, functionality: fully functional, turning length: 1,337 mm, turning diameter: 420 mm, General Control: Siemens 828 D Turning diameter: 420 mm Turning length: 1,337 mm Swing diameter: 700 mm Bar capacity: 89 mm Rapid traverse speed: 20 / 10 / 24 m/min Main spindle Dedpfxox Ag Hmj Akmjku Bar capacity: 89 mm Chuck size: 305 mm Speed: 2,500 rpm Spindle power: 22 kW Spindle torque: 1,050 Nm Sub spindle Speed: 4,000 rpm Spindle power: 12 kW Spindle torque: 122 Nm Tool turret Technology: 12 stations Tool drive: 5,000 rpm Power: 9.4 kW Torque: 90 Nm Tool holder: BMT-65 / BH Travel X: 280 mm Travel Y: 120 mm Travel Z: 1,390 mm Equipment Chip disposal: chip conveyor Coolant capacity: 240 liters Tool measurement: measuring arm in the working area Part discharge: parts catcher Bar feeder: prepared

Year of construction: 2008, operating hours: 2,893 h, condition: excellent (used), functionality: fully functional, machine/vehicle number: 0390062, Equipment: CE marking, YAWA MW1050 YA – High-Quality Machine in Very Good Condition YAWA MW1050 YA in very good condition, available for sale. This YAWA MW1050 YA has been well maintained and carefully operated throughout its service life. The machine has only been used for a few hours per day on average, making it an attractive opportunity for a buyer looking for a well-preserved and reliable machine. The machine is in very good overall condition and is ready for continued production. It has been operated in a professional production environment and has received regular maintenance and care. Machine highlights: Manufacturer: YAWA Model: MW1050 YA Very good overall condition Well maintained Only used a few hours per day on average Carefully operated Ready for immediate continued production Inspection possible by appointment This is an excellent opportunity to acquire a well-maintained YAWA MW1050 YA with relatively low usage and in very good working condition. Dsdez Hkm Njpfx Akmjku Further technical specifications, photographs and additional information are available upon request.

Condition: excellent (used), Year of construction: 2005, functionality: fully functional, clamping force: 6,500 kN, screw diameter: 80 mm, clearance between the columns: 1,000 mm, displacement volume: 1,779 cm³, injection pressure: 1,855 bar, injection weight: 1,600 g, mold height (min.): 450 mm, ejector force: 96,000 N, ejector stroke: 300 mm, plate length: 1,450 mm, plate width: 1,350 mm, Clamping force: 650t Year of manufacture: 2005 Injection weight: 1600g Injection unit 3300 Screw diameter: 80 mm Screw L/D ratio: 20 Specific injection pressure: 1855 bar Injection volume: 1779 ccm Injection weight: 1600 g Djdoz E Iq Aopfx Akmeku Mold closing system Clamping force: 650 t Mold plate dimensions: 1450 x 1350 mm Distance between columns: 1000 x 900 mm Mold height: 450 - 950 mm Opening stroke: 930 mm Maximum plate distance: 1880 mm Ejector force: 96 kN Ejector stroke: 300 mm Control system: NC4 Equipment: - Hydraulic core pulls: 4 - Hydraulic cascades: 8 - Hot runner adjustment points (zones): 16 - Wittmann W 843 Pro robot, year 2021 (Z 3000 / Y 2000 / X 1200 mm, C-axis servo 180°, B-axis servo 270°) included

Condition: used, Year of construction: 2013, operating hours: 14 h, functionality: limited functionality, machine/vehicle number: TJ-350-20/40 KPSI //TJ-160-20/40 KPSI, total width: 1,500 mm, total length: 3,000 mm, total height: 2,500 mm, pressure: 2,800 bar, operating pressure: 2,800 bar, fuel: diesel, overall weight: 3,000 kg, rotational speed (min.): 700 rpm, rotational speed (max.): 1,500 rpm, high-pressure hose length: 60,000 mm, year of last overhaul: 2025, Equipment: rotational speed infinitely variable, A Bundle of 5 ea. UHP waterblast machines, c/w a vast variety of spares and accessories, as follows: 1 x High-Pressure Water Jet Unit with Deutz-MWM V-8 Diesel Engine adjustable pressure 0–1400 bar and 0–2800 bar, dump system, with plunger changeout kit as follows: 1400 bar at 99 liters/minute, and 2800 bar at 46 liters/minute. The fluid head of this pump, including stuffing boxes and valves will be used for both 1400 bar and 2800 bar. Changing pressure range between 1400 and 2800 Bar is carried out by a simple and easy plunger changeout. The unit was built in 2013 and kept operational as a backup machine, but was only used once for 14 hours at 2800 bar for a bundle heat exchanger cleaning project. This UHP machine is mounted on a zinc coated steel skid. Dsdpfx Ajxc E Trokmoku The Deutz-MWM engine was purchased as a used engine, with approx. 3,000 operating hours , and was fitted in 2013 with a new Jetech UHDW high-pressure water jet pump. In addition, a large amount of accessories and spare parts are included, such as dump guns & foot valves, swivel joints, surface cleaners, rotary nozzles, high-pressure lances, nozzle inserts, seals, special tools, etc. An identical UHP waterblast unit is also available, but with a Scania V-8 engine and counting 850 operating hours at max. 1400 bar / 99 liters/minute. That unit is housed in a 20ft. container, with an 800 l Diesel Tank, a work bench /vise, Furthermore, there are 3 additional high-pressure water jet units with 110 kW power each, 2 of which have Volvo TD71A Diesel Motors, plunger changeout kits for 1400 and 2800 bar. A third unit is a Kamat K11000 with 2800 Bar OP. and a JCB Dieselmax engine. Also available is a hydraulic heat exchanger cleaning device with a rotating lance mounted on a scissor lift table, suitable for very large heat exchangers. All equipment comes from the closure of my company due to retirement. A buyer is sought for all machines and accessories as a complete package.

Condition: excellent (used), Year of construction: 2012, clamping force: 160 kN, ENGEL VC 1050/160 Tech – Clamping unit Clamping force: 1600 kN Opening stroke: 608 mm Ejector stroke: 150 mm Ejector force: 61 kN Screw diameter: 45 mm Max. swept volume: 342 cm³ Screw speed max: 290 r/min Screw speed max (current): 290 r/min Injection rate: 170 cm³/s Injection rate (increased): 134 cm³/s Specific injection pressure: 2403 bar Dkjdpjx Up T Njfx Akmou Specific injection pressure (increased): 2404 bar Nozzle stroke: 350 mm Nozzle contact force: 67.2 kN Type: Horizontal Drive: Hydraulic hours: 53.000h

Year of construction: 2022, condition: new, 1 x Niro-Tech dual-system twin-shaft paddle mixer. Model - RX-850. Dedpfx Ajhr Rp Iokmsku Capacity - 850 litres. Max product input - 425kg-700kg depending on product. Installed power - 10kW. Electrics - 400v, 50hz, 3 phase. Manual loading valve with magnetic sensor. Pneumatically emptying valve. Manufactured in AISI 304 stainless steel. Brand new, made to order. Supplied with 12-month warranty. Please allow a lead time of up to 8 weeks for the manufacture of this machine. Located in Poland. UK Food Machinery Ltd can organise transport of this equipment to your premises at a supplementary cost.

Condition: ready for operation (used), Year of construction: 2008, operating hours: 65,300 h, functionality: fully functional, clamping force: 2,942 kN, screw diameter: 70 mm, No reserve price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Clamping force max.: 300 tonnes Dkedpfxey Ewf Io Akmeu Screw diameter: 70 mm MACHINE DETAILS Operating hours: 65,300 h Note: When purchasing multiple items from the same location (see offers below), you will be exempt from or receive the most favorable rates for dismantling and loading costs.

Condition: new, saw blade diameter: 550 mm, compressed air connection: 7 bar, Equipment: documentation/manual, - Saw blade 550 mm - Double miter cut - 4 pneumatic clamps - Hydrocheck system - Mist lubrication system Djdpforh Dkyex Akmeku - 1 roller conveyor 300 cm - 1 roller conveyor 300 cm with length stop - Air blow gun - Protective cover - Documentation - 400V

Condition: ready for operation (used), Year of construction: 1998, operating hours: 29,598 h, clamping force: 5,500 kN, screw diameter: 80 mm, total height: 2,230 mm, overall weight: 20,000 kg, product length (max.): 8,840 mm, This Engel Duo 3550/550 Tech was manufactured in 1998. It features a clamping force of 5500 kN, a maximum injection volume of 1960 cm³, and a screw diameter of 80 mm. The machine dimensions are 8840 x 2520 x 2230 mm, and it weighs 20,000 kg. If you are looking to get high-quality injection moulding capabilities, consider the Engel Duo 3550/550 Tech machine we have for sale. Contact us for more information. • Maximum injection volume: 1,960 cm³ • Minimum mould height: 310 mm • Maximum mould height: 800 mm • Platen opening stroke: 850 mm • Platen dimensions (W x L): 1,345 x 1,280 mm • Tie-bar distance (H x V): 915 x 860 mm • Motor power: 55 kW • Heater power: 47.5 kW • Injection nozzle radius (at tip): R35 • Centering ring diameter: 200 mm Dkjdpox Nr H Iofx Akmeu • Number of cores: 0 • Number of heating zones: 0 • Operating hours: 29,598 h • Condition: Excellent Additional equipment • Robot: Not equipped • Robot interface: None • Other accessories: None reported

Condition: excellent (used), Year of construction: 2004, operating hours: 98,108 h, clamping force: 1,500 kN, screw diameter: 50 mm, injection weight: 354 g, Engel Victory 750/150 Tech injection molding machine (146) Number: 146 Availability: in stock Year of production: 2004 Producer: Engel Injection molding machine condition: used Screw diameter [mm]: 50 Injection weight [g]: 354 Injection pressure [bar]: 1427, 2500 Closing force [kN]: 1500 Column spacing [mm]: without columns Plate size [mm]: 750 x 850 Control type: CC 200 Tongue: german Installed power [kW]: 61 Working hours [h]: 98108 Dkedpfx Ajy Ec D Nokmou Weight [kg]: 9500 Dimensions [mm]: 5700 x 2000 Feed hopper: NO Core string: Yes Robot socket: Yes

Condition: new, turning diameter over bed 400 mm turning diameter over slide rest 260 mm turning length 1500 mm turning diameter in the gap 570 mm turning speeds 45 - 1800 U/min centre height 210 mm spindle bore 52 mm tailstock quill taper MT 4 MK connected load frequency 400 V total power requirement 3,5 kW weight of the machine ca. 1,5 t dimensions of the machine ca. 2,6 x 1,1 x 1,7 m Professional industrial machine digital display 3-jaw chuck 200 mm. 4-jaw chuck 200 mm. Faceplate 280mm Bezel fixed Bezel rotating Multifix steel holder. Machine light Foot brake removable chip tray, chip protection wall Hardened and ground bed rails Complete coolant system Dkodpfx Aey Ehxxskmsu Feed protection Machine feet Machine tool

Year of construction: 2022, condition: new, Niro-tech RX-150 single shaft paddle mixer Dedpfx Akshqnppjmeku This RX-150 is made of stainless steel. The machine allows mixing in both directions. It is equipped with a single mixing shaft and moisture proof button control panel. Motor power 1.5 kW provides 5-48 rot. /min. The tank capacity is 150 liters, which allows filling it with 110 kg of meat. Unloading provided by tilting the drum to about 96 degrees. The mixer adapted to unloading directly to the standard buggies of 200 liters capacity. The dimensions of the machine: 1300 x 700 x 1600 (all in mm) More photos and full specifications: /

Condition: ready for operation (used), Year of construction: 2007, functionality: fully functional, clamping force: 3,922 kN, screw diameter: 90 mm, injection weight: 2,228 g, No reserve price – guaranteed sale to the highest bidder! ENGEL injection moulding machine + ERC/1-F robot! TECHNICAL DETAILS Clamping force: 400 tonnes Screw diameter: 90 mm Shot weight: 2,228 g Enlarged platen: 1,200 x 1,100 mm MACHINE DETAILS Dedpfx Akjy Ewuismjku Weight (first unit): 20 tonnes Weight (second unit): 7.5 tonnes EQUIPMENT Engel ERC/1-F robot (year of manufacture: 2009) Note: If you purchase multiple items from the same location (see offers below), the most favourable disassembly and loading costs will apply.

Condition: new, saw blade diameter: 450 mm, – Saw blade 450 mm – Double mitre – 4 pneumatic clamps – Hydrocheck system – Automatic safety cover – Misting lubrication system – 1 roller conveyor 300 cm with length stop – Blow gun – Protective cap – Documentation – 400V Djdercb Tzopfx Akmeku

Condition: new, number of rollers: 3, roller (bottom) diameter: 140 mm, roller (top) diameter: 140 mm, side roll diameter: 140 mm, roller diameter: 140 mm, sheet thickness steel (max.): 4 mm, - Capacity 2050 x 4 mm - Electrically adjustable rear roll - Conical rolling - Swiveling top roll - Braking motor - Emergency stop - Documentation - 400V Dksdopwgcuepfx Akmsu

Condition: new, roller diameter: 140 mm, - Capacity 1050 x 6 mm - Electrically adjustable rear roller - Conical roller - Swiveling top roller - Brake motor - Emergency stop - Documentation Dksdpfxjpwgdyj Akmsu - 400V

Condition: good (used), MIG/MAG hose package extension, intermediate hose package -Welding cable: extension / connection cable water-cooled -Length: 4.35 m -Version: Dinse plug, gas hose, control cable -Connector: 4-pin Djdsucmncopfx Akmoku -Transport dimensions: 470/460/H100 mm -Weight: 6.0 kg