Used Biele Pressing Lines for sale (20,661)

Condition: used, 72”x 0.5” x 60,000Lb Braner Turret Type Loop Slitting Line Braner Turret Type Loop Slitting Line is used for coil metal cross cutting with maximum width 72”, maximum 0,5” metal thcikness and 60,000Lb coil capacity Make: Braner Year New: 1996 Material Thickness: .060″ – .500″ Material Width: 12″ – 72″ Coil Weight: 60,000Lb Line Speed: 120 – 250 feet per minute Coil ID: 20″ – 24″ Coil OD: 75″ Slitting Cap: .500″ / 4 cuts – .125″ / 40 cuts Bedjrn Sqhepfx Afwsdg Entry L-Type Coil Car Hydraulic Lift & Traverse Self Contained Hydraulics Control Panel Mandrel Uncoiler Powered Hold – Down Roll Outboard Bearing Support Hydraulic Feed-Up Drive Water Cooled Brake Hydraulic Peeling Table Driven Entry Pinch Rolls Adjustable Edge Guides Entry Mechanical Crop Shear Two Turret Type Slitting Heads Arbor Diameter: 12″ Powered Arbor Adjustment Powered Head Rotation Motor: 100HP DC Drive Lots of Knives & Tooling Two (2) Scrap Winders Powered Open / Close Heavy Duty Design Looping Pit Cross Over Table Drag Board Tension Stand Material Feeding Table Recoiler Hydraulic Drum Powered Push Off Hydraulic Over-Arm Separator Outboard Bearing Support 300HP DC Motor Drive Exit L-Type Coil Car Hydraulic Lift & Traverse Self Contained Hydraulics Upgraded Siemens Digital Drives, Electrics, Controls, Knives & Tooling

Condition: excellent (used), Installed new in 2022, this conveyor was taking product from a low level multihead weigher up to a vertical form fill seal machine in a room where the height was restricted. As new condition. Bsdpjrq Eawefx Afwjdg

Condition: used, Cut-to-length line Bronx 2050x8mm x35t (A3781) for coil metal cross cutting into sheets of required sizes with different length and width. Thickness Range: 2 – 8 mm Coil Capacity: 35t Coil OD: 2100mm Coil ID: 508mm , 610mm , 762mm Strip Width: 2000mm – 600mm Sheet Length: 8000mm – 600mm Pack Weight: 10 t Max Line Speed: 60 meters/min Cuts Per Minute: 35 Complete Line With 4 Coil Storage Storage Ramp Coil Loading Car Double Stub Mandrel Uncoiler Sliding Base Hydraulic Expansion Drag Brake Tension Control Peeler / Hold Down Roll 3 Roll Coil Breaker Feed Up Table 7 Roll Backed Up Leveler with Pinch Roll Breaker (9 Rolls Total) Entry Power Pinch Rolls 3 Flights Top & Bottom Back-Up Rolls Entry & Exit Pinch Rolls Bdedpjq Ulh Hjfx Afwsg Marking Unit Measuring Roll Pinch Rolls Bronx Flying Shear AC Die Accelerator Flywheel & Air Clutch and Brake Rack & Pinion Accelerator 35 Cuts per Minute Reject Conveyor Twin Belt Gauging Table Stacker Side Squaring Lift Stacking Tables Photo Cells Drop Type Motorized End Stop Motorized Run Out Conveyor Upgraded AC Motors Upgraded Control Techniques Digital Drives Complete Line

Condition: ready for operation (used), functionality: fully functional, stroke length: 450 mm, workpiece length (max.): 3,000 mm, workpiece width (max.): 1,300 mm, workpiece height (max.): 450 mm, TECHNICAL DETAILS Press drive: Hydraulic Max. workpiece length: 3,000 mm Max. workpiece width: 1,300 mm Max. workpiece height: 450 mm Total stroke: 450 mm Number of cylinders: 6 Cylinder diameter: 70 mm Heating type: Oil-heated Max. temperature: 120 °C Separate heating for top/bottom: Yes MACHINE DETAILS Number of work stations: 1 Number of levels: 1 Plate material: Steel Main motor power: 2.2 kW Connected power: 10.0 kW Voltage: 400 V Fuse rating: 32 A Dimensions & Weight Dimensions (L x W x H): 3,800 x 1,650 x 2,400 mm Weight: 3,500 kg Transport packages: 1 Bdjdpfxjzxcmue Afwjg EQUIPMENT Heating boiler Note: The plates require repair.

Condition: used, machine/vehicle number: 008701, Max working length: 2740 mm Max working width: 1240 mm Membrane: yes No of positions for the rolls: 2 Bedpfx Afjzq Urtjwjdg No of work tables: 1

Condition: used, machine/vehicle number: 008256, Max width workable: 800 mm Max length workable: 2500 mm Max height workable: 1340 mm Max feed speed: 40 m/min Bjdpfx Aex A Hfvsfwodg

Condition: used, machine/vehicle number: 008341, Max working length: 2480 mm Max working width: 880 mm No of Pressing cylinders: 4 No of Daylights: 1 Bdsdpfx Afjx A Tf Aswjg

Condition: used, machine/vehicle number: 007665, Position 1: Automatic Drilling Machine WEEKE-BST 503 + BST 507 Bodpfx Aswuz Dgjfwjdg Position 2: Automatic Drilling Machine WEEKE-BST 503 + BST 507

Condition: used, machine/vehicle number: 007676, Position 1: Brushing Machines BARBERAN-ECO-1700-H-SI Bdodpfx Aowuzzrjfwog Position 2: Gluing Machine BARBERAN-ECO-1700-H-SI Position 3: Continuous Cycle Presses BARBERAN-ECO-1700-H-SI Position 4: Continuous Cycle Presses BARBERAN-ECO-1700-H-SI

Condition: used, machine/vehicle number: 008276, Position 1: Planers/Moulding Machines KENTWOOD-FEEDMAC31+M200+FEEDMAC33 Position 2: Panel Feeding and Loading KENTWOOD-FEEDMAC31+M200+FEEDMAC33 Position 3: Panel Stacking and Offloading KENTWOOD-FEEDMAC31+M200+FEEDMAC33 Bdjdpfx Aox A Tbwefweg

Condition: used, machine/vehicle number: 007466, Position 1: Roller Conveyors SUPERFICI-BRAVOROBOT P1 Position 2: Brushing Machines SUPERFICI-BRAVOROBOT P1 Position 3: Spray Robots SUPERFICI-BRAVOROBOT P1 Position 4: Ovens SUPERFICI-BRAVOROBOT P1 Position 5: Roller Conveyors SUPERFICI-BRAVOROBOT P1 Position 6: Roller Conveyors SUPERFICI-BRAVOROBOT P1 Bjdpfx Aewu Aa Njfwodg

Condition: used, Material: 1095 High Carbon Steel Tensile Strength: 120,000 PSI Shear Strength: 96,000 PSI Thickness Range: .0045" - .025" Line Direction: Left to Right Cut Width & Thickness .0045" = 1/4" , 3/8" , 1/2" , 3/4" , 1" Bdsdpfx Asztc Tdofwsg .0051" = 3/8" , 1/2" , 5/8" , 7/8" .0062" = 3/8" Line Speed: 1500 FPM Entry Strip Width: 18' Traverse Wider Coil Width: 8" Entry Coil ID: 15" - 22" Traverse Winder Coil ID: 11" Exit Coil ID: 16" Entry Coil OD: 54" Ribbon Wound Coil OD: 39" Exit Coil OD: 54" Entry & Exit Coil Weight: 10,000# Traverse Winder Coil Weight: 2250#` Complete Line With: Mandrel Uncoiler Hold Down Roll 3 Leaf Hydraulic Expansion 15 HP Drive Disc Drake Edge Control Unit Peeler Table / Deflector Roll Newcor Strip Welder with Planishing 2 Roll Material: 1095 High Carbon Steel Tensile Strength: 120,000 PSI Shear Strength: 96,000 PSI Thickness Range: .0045" - .025" Line Direction: Left to Right Cut Width & Thickness .0045" = 1/4" , 3/8" , 1/2" , 3/4" , 1" .0051" = 3/8" , 1/2" , 5/8" , 7/8" .0062" = 3/8" Line Speed: 1500 FPM Entry Strip Width: 18' Traverse Wider Coil Width: 8" Entry Coil ID: 15" - 22" Traverse Winder Coil ID: 11" Exit Coil ID: 16" Entry Coil OD: 54" Ribbon Wound Coil OD: 39" Exit Coil OD: 54" Entry & Exit Coil Weight: 10,000# Traverse Winder Coil Weight: 2250#` Complete Line With: Mandrel Uncoiler Hold Down Roll 3 Leaf Hydraulic Expansion Sliding Base 15 HP Motor 15 HP Motor Disc Brake Edge Control Peeler Table / Deflector Roll Newcor Strip Welder with Planishing 2 Roll Bridal Unit for Tension Control Double Roll Tracking Roll for Strip Alignment 2 Sets of Rubber Coated Deflector Rolls Edge Guides Andritz Slitter Head New in 2016 5" Diameter Arbors 12 Sets of Quick Change Tooling Arbors Pre-Packed Arbors Shimless Tooling Anti Friction Bearings 25 HP DC Drive, 1750/2000 RPM Scrap Baller Recoiler 16" Diameter Drum 10,000# Coil Capacity 30 HP DC Drive Hydraulic Push-Off Hold Down Roll 21" Drum Face 1 Arm Exit Turnstile Vertical Strand Separator Aligns Strips after Exiting the Slitter Deflector Rolls 12 Oscillating Recoilers 11" Diameter Drums Hydraulic Push-Off Vertical Edge Conditioners S Bridal Strip Tension Rolls (2) Hydraulic Traversing Oscillating Wheel 7.5 HP Drive 1 Arm Exit Turnstiles Powerflex Digital Drives 755 Allen Bradley PLC Digital Drives Digital Readouts Central Hydraulic Units Operator Push Button Stations Slitter Tooling Hydraulics & Electrics

Condition: used, machine/vehicle number: 008706, Max width workable: 600 mm Max length workable: 2500 mm Max height workable: 1220 mm Max feed speed: 16 m/min Bsdpozrl Hksfx Afwedg

Condition: excellent (used), Year of construction: 2019, functionality: fully functional, machine/vehicle number: mse mail inserter, Bluecrest epic mail inserter / folder processing speeds of 22,000 mailpieces per hour hi input accumulator / folder 4 station chassis current windows barcode 2D reading Bjdpfx Afszkli Njwjdg cameras for mail matching

Condition: used, Slitting line McKay 60''x0.625''x100,000Lb Make: McKay Material Thickness: .065″ – .625″ Maximum Material Width: 66″ Weight Capacity: 100,000Lb Coil ID: 24″ – 30″ Exit ID: 30″ Coil OD: 90″ Maximum Speed: 450 fpm Direction: L-R Pit Type Entry Coil Car Double Mandrel Uncoiler with Hold-Down Roll Hydraulic Peeler Driven Pinch Rolls Coil Flattener with 200HP Drive Slitting Head with 16″ Arbor Diameter 250HP Drive Bdedslwtzyspfx Afweg Knives & Tooling Two (2) Scrap Choppers Recoiler with Over-Arm Separator 250HP DC Drive Exit Pit Type Coil Car Electrics, Hydraulics Controls, Tooling

Condition: used, 72″ x .187″ x 50,000Lb Paxson Loop Slitting Line Make: Paxson Material Width: 12″ – 72″ (Uncoiler 60″) Bodjihf Ufepfx Afwsdg Material Width: .010″ – .187″ Coil Weight: 50,000Lb Coil ID: 20″ – 24″ Coil OD: 72″ Speed: 500 /1000 fpm Direction: Right to Left Material Strength: 40,000 yield / 50,000 psi shear Material: CR, HR, Galvanized Entry Transfer Cart Entry Coil Car Mandrel Uncoiler Powered Hold-Down Roll Powered Expansion Sliding Base Hydraulic Peeling Table Driven Pinch Rolls

Condition: used, Cut-to-length line Delta-Alcos 72”x0.5”x60,000Lb (A3770) Bsdpfx Aoixqg Nsfwsdg Make: Delta / Alcos Material Width: 36" - 72" Thickness Capacity: .048" - .530" Weight Capacity: 60,000Lbs Coil ID: 16" - 24" Coil OD: 72" Yield Strength: 50,000PSI Direction: Right to Left Coil Storage Conveyor Entry Coil Car Hydraulic Lift and Traverse Cone Uncoiler DC Motorized Brake Sliding Base Wichita Cooled Brake Powered Hold-Down Roll Hydraulic Peeling Table Powered In & Out Set of Driven Pinch Rolls Delta Corrective Plate 4-Hi Leveler Number of Work Rolls: 9 Work Roll Diameter: 8" Work Roll Width: 82" Powered Up & Down Back-Up Flights DC Motor & Drive Delta Corrective 4-Hi Leveler Number of Work Rolls: 19 Work Roll Diameter: 4" Work Roll Width: 82" Motorized Back-Up Flights Powered Work Roll Adjustment DC Motor & Drive Alcos Mechanical Shear Down Cut Shear Driven Entry Pinch Rolls Pneumatic Clutch & Brake AC Motor Drive Alcos Drop Type Stacker 40' Sheet Length Driven Exit & End Conveyrors Touch Screen Digital Panel Operator Push Botton Station Digital Read Outs Hydraulics, Electrics, Controls, Presently Installed

Condition: used, Slitting line SECO 60″ x 0.375″ x 50,000Lb (A3791) is perfect solution for longitudinal coil metal cutting into strips with maximum metal thickness 0.375” and maximum coil width 60” Cold Rolled and Hot Rolled Steel 18-60” Strip Width 2 Speed Gear Box 200-500 FPM Thickness: .032″-.375” Complete Line with the Following Components: L-Type Entry Coil Car 40,000# Max Coil Weight Uncoiler: Bjdpjtiy Ntefx Afwjdg Coil ID: 23-30.50” Coil OD: 72” Maximum Coil Weight: 40,000# Maximum Sliding Base Hydraulic Expansion Peeler and Hold Down Roll 5 Roll Coil Breaker Entry Adjustable Edge Guides Entry Crop Shear Slitting Head: 10” Arbors 40 HP Motor Drive 2 Scrap Winders Recoiler: Coil OD: 72” Max Coil ID: 24” 150HP DC Motor 3 Arm Exit Turnstile 40,000# per Arm Motorized Turn Complete Line with Knives, Rubbers, and Spacers Controls, Hydraulics, and Electrics

Condition: used, Coil Width: 12″ – 60″ Material Thickness: .015″-.135″ Coil ID: 20″-24″ Bsdpfxoihf Tpe Afwedg Speed: 180 fpm Direction: Left to Right Entry Floor Standing Coil Car Mandrel Uncoiler with Powered Expansion Motorized Hold-Down Roll Feed-Up Drive Hydraulic Peeler 9-Roll Coil Straightener with 4″ Work Rolls Driven Entry Pinch Rolls 40HP Motor Adjustable Hump Table Mechanical Shear Belt Conveyor with Positive Stop Device Air Gate Sheet Stacker, with Two Section of Gravity Rolls

Condition: used, 72″ x .187″ x 20,000Lb Universal Slitting Line Bdedpfeihf Twjx Afwsg Material Width: 12″ – 72″ Material Thickness: .015″ – .187″ Coil Weight: 20,000Lb Coil ID: 20″ Coil OD: 72″ Direction: Left to Right Entry Floor Standing Coil Car L-Type Design Hydraulic Lift & Traverse Mandrel Uncoiler Powered Hold-Down Roll Hydraulic Expansion Air Cooling Brake Sliding Base Hydraulic Peeling Table Slitting Head Arbor Diameter: 7″ Powered Arbor Adjustment 100HP DC Motor Knives & Tooling Recoiler Powered Push-Off Hydraulic Over-Arm Separator Hydraulic Expansion 100HP DC Motor Exit 2-Arm Turnstile Arm Width: 72″ Powered Rotation Complete Slitter with Electrics, Hydraulics, Controls, Tooling

Condition: used, Year of construction: 1999, color channels: 8, We offer this used Heidelberg Speedmaster 74 8 Color Plus Coater 4/4 offset printing press, year of construction 1999. Manufacturer: Heidelberg Bdsdsynvurepfx Afwjg Model: Speedmaster 74 8 Color Plus Coater Perfecting 4/4 or Straight Year of manufacture: 1999 Console CPC 1.0.4 Technotrans Cooling Unit Condition: used Category ID: 839 Type ID: 520 Type: offset printing press If you have any questions or need more information, feel free to send us a message or give us a call.

Year of construction: 2018, condition: good (used), functionality: fully functional, in total 7 FMTM250-7HS-32P FUSEI mold presses, year of manufacture 2011-2018, and also some Fujiwa mold presses, vintage 2002-2005 available Bdedpfx Afoxniklewjg

Condition: excellent (used), Rademaker block processor with Rondo make up line. Has been producing 'Salmon en croute' for major UK supermarkets. Whole line is in lovely condition and can obviously be easily adapted to run other products like pasties, sausage rolls etc. Bsdpfx Aeiabu Usfwedg Mainly used seasonally so only 11,800 running hours.

Condition: used, Year of construction: 2006, functionality: fully functional, Modular and scalable design Probable working width 600 mm Electrical supply 400 V Rated current 16 A Frequency 50 Hz – to be confirmed Output up to 7,500 pieces/hour Programmable control with touchscreen 50 memorizable programs Rex head according to configuration Weight range 35 to 85 g with Basic Rex Weight range 50 to 110 g with Basic Rex Pre-lamination before fermentation Resting pre-fermenter Optional pre-fermenter air conditioning Interchangeable stamping station Optional longitudinal cutting station RR forming station according to configuration WK-RR forming station according to configuration Seeding unit according to configuration Automatic depositing onto trays or belts Drive power 3.5 to 5.3 kW Bsdpfxjzp H Epe Afwodg Fermenter air conditioning 4.4 kW Fermenter water 15 l/h maximum at 2 bar Seeding water 40 l/h at 2 bar Maximum height approximately 2,640 mm Used industrial line for rolls – König Combi Line The used König Combi Line is a modular line designed to automate the dividing, rounding, resting, shaping, and depositing of rolls. Its scalable design allows different modules to be combined according to the desired products, required output, and organization of the bakery. The nameplate identifies this equipment as a Combi Line manufactured by König Maschinen Kft. The visible machine number is 06.6.0070. The beginning of the configuration code appears to correspond to a 600 mm width version, but the complete composition of the line must be confirmed by an inventory of the modules present. Why this line stands out The Combi Line is based on a modular architecture, allowing the production of numerous formats from a single installation. Depending on its configuration, it can integrate a Rex dividing-rounding head, pre-lamination, a pre-fermenter, a stamping station, a forming station, a seeding unit, and an automatic depositing unit. This modularity facilitates the adaptation of the line to changes in production. Additional equipment can be added later without replacing the entire installation. Key advantages Modular and scalable design Automated production of many types of rolls Output of up to 9,000 pieces per hour Gentle dough handling with Rex heads Memorizable settings for different productions Quick tool changes for stamping Automatic depositing onto trays, belts, or boards Wide choice of shaping and finishing modules Seed recovery, limiting waste Easy access for cleaning and maintenance Products achievable depending on the configuration The Combi Line range allows the production of round, oval, flattened, laminated, stamped, cut, rolled, or seeded dough pieces. It is particularly suitable for hamburger buns, hot dog buns, milk bread rolls, Kaiser rolls, Kornspitz, decorated rolls, donuts, bocadillos, and long products such as half-baguettes. It can process wheat doughs, mixed doughs, cereal doughs, and various leavened doughs, provided they are compatible with the dividing head and installed tools.

Condition: used, Year of construction: 1994, operating hours: 392 h, functionality: limited functionality, machine/vehicle number: 1115, type of input current: three-phase, total height: 150 mm, total length: 2,200 mm, total width: 900 mm, overall weight: 1,800 kg, power: 11 kW (14.96 HP), input voltage: 380 V, Equipment: documentation/manual, Brand: Pawert Type: I-40/85 Year of construction: 1994 Capacity: 150 kg/hour Briquette dimensions: Ø 40 mm Motor: 11 kW Bdsdpfx Afezyau Ejweg Weight: 1800 Including feed screw and discharge chute.