Used Bison Planschiebe 4 Backen for sale (58,332)

Condition: new, Year of construction: 2022, functionality: fully functional, type of input current: three-phase, power: 50 kW (67.98 HP), input voltage: 400 V, fuel: domestic gas H, overall weight: 2,200 kg, nominal power: 50 kW (67.98 HP), input frequency: 50 Hz, continuous power: 50 kW (67.98 HP), input current: 72 A, Equipment: documentation/manual, For sale: new and unused 2G g box 50plus combined heat and power (CHP) unit from 2022. Bdjdpfx Ahez Hngmomsh This is a 2G Energietechnik g box 50plus, configuration as70 4, suitable for simultaneous generation of electricity and heat using natural gas. The unit has never been put into operation and is in new condition. At full load, the CHP unit delivers 50 kW of electrical power and approximately 104 kW of thermal power. The unit is designed for 400 V and 50 Hz and is equipped with a Liebherr G924 natural gas engine and a Leroy Somer LSAH 44.3 generator. Technical specifications: • Manufacturer: 2G Energietechnik GmbH • Type: g box 50plus • Configuration: as70 4 • ID number: H1214 • Year of manufacture: 2022 • Electrical power: 50 kW • Thermal power: approximately 104 kW • Rated voltage: 400 V • Rated frequency: 50 Hz • Rated current: 72 A • Weight of CHP module: approximately 2,200 kg • Fuel: natural gas • Electrical efficiency: approximately 34.5 percent • Thermal efficiency: approximately 71.8 percent • NOx emissions: less than 125 mg per Nm³ • Sound pressure level of CHP: approximately 55 dB(A) at 1 meter The offered package consists not only of the CHP module. The installation also includes two Viessmann boiler bodies, one Viessmann Proflame VM IV 3 gas burner, a separate control cabinet, and various flue gas components, fittings, and related documentation. The original new price of the complete installation was approximately €189,000. The installation comes from a project for which it was ultimately not used. The various main components are from 2022 and have been stored without being put into operation. Due to the size and composition of the installation, we advise interested parties to contact us in advance for further technical information, photos, documentation, and an overview of the components available. An inspection is, of course, possible (location: Winterswijk, Netherlands). Loading onto the buyer's transport vehicle is possible on site.

Condition: used, Year of construction: 2008, machine/vehicle number: 0007-2008, 4 chambers with dry steam, glass doors, Bodpsz Ibq Isfx Ahmodh suitable for this Number available (price per tank): 1 electrical power supply kW: 5 Sleevetunnel chambers: 4 Strom / Volt: 400

Condition: used, functionality: fully functional, Year of construction: 2017, operating hours: 5,218 h, load capacity: 3,000 kg, lifting height: 5,600 mm, fuel type: electric, mast type: triplex, construction height: 2,930 mm, fork length: 1,350 mm, drive type: Elektro, Four-way sideloader Mast type: Triplex Condition: Ready for use and fully functional Bjdpfx Aswcubnjhmodh Technical condition: Good Reach fork, fork positioner,

Condition: used, Year of construction: 1978, x-travel 1000 mm y-travel 900 mm z-axis 800 mm W-axis (spindle longitudinal) 500 mm Bdedpfezmir Tjx Ahmsh spindle diameter 90 mm table surface area 1.000 x 1.000 mm table load 2,5 t spindle turning speed range 8- 1600 U/min power capacity - milling spindle 11 kW tool taper SK 40 | control Heidenhain TNC 407 dimensions 4,5 x 3,25 x 3,0 m weight of the machine ca. 8 t used table borer. retrofitted to CNC Heidenhain TNC 407 - some tool holders - turntable with motor - coolant system

Condition: good (used), functionality: fully functional, Description: Screw compressor ZR 4-51 1992 Characteristics: Capacity 8.60 bar Power 250 kW Voltage 500 V Running hours at last maintenance: 57957 Bdedpfx Aevyrnzohmjh

Condition: used, Year of construction: 2017, operating hours: 1,800 h, No. 3131 CNC machining center FORMAT-4 profit H10 22.43 Used, year of construction 2017 Operating hours approx. 1800 h Package consisting of CNC machining center FORMAT-4 profit H10 22.43, feeding unit FORMAT-4 L-Motion and extraction unit FELDER RL 300 Technical data CNC machining center FORMAT-4 profit H10 22.43: Matrix table system made of phenolic resin Raster table with two stop rows Automatic central lubrication HARDWARE control computer Mobile control panel Handheld terminal for remote control of the axes Two vacuum pumps, rated output 2 x 250 m3/h Tool changer with 10 tools Tool changer on the left in the machine stand: 8 tool positions for HSK Milling spindle 12 kW (S6) HSK F63, 24000 rpm Central extraction via merged connections (D=250mm) Woodflash German software (H20/H08/H10/H50) Travel of axes H10 22.43: X= 5230 mm / Y= 2560 mm / Z= 280 mm Working field: X= 4300 mm / Y= 2160 mm / Z= 105 mm Axis positioning speed: X= 100 m/min / Y= 100 m/min / Z= 30 m/min Technical data feeding unit FORMAT-4 L-Motion: Year of construction 2017 In 2-axis version with 4 storage locations for feeding an H10 with lifting table Feeding the CNC Gentle transport Fully automatic panel handling Workpiece sizes: Length 2000-4200mm / width 600-2100mm / thickness from 8mm / panel weight 200kg Density: chipboard 650kg/m3 / MDF raw 750kg/m3 Stacking height 1800mm Bdsdporrh T Asfx Ahmsh Technical data extraction unit FELDER RL 300: Year of construction 2023 Nominal volume flow 6000 m3/h, H3 GS dust-tested, JET cleaning Compressed air connection 3/4 inch Connection pressure 7 - 12 bar with 40NL/min Operating pressure in the device 6 bar Chip container capacity 500 l Extinguishing device with powder extinguisher Dry fire extinguisher 12 kg Sale On behalf of customer, ex location Leipzig, without dismantling, without transportation and assembly Subject to errors in description and price Dismantling and loading by us optionally possible To avoid possible misunderstandings, an on-site inspection is possible and recommended by appointment Sold as is Technical details, condition description, year of construction and scope of delivery according to manufacturer's brochure or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded, the following applies: "purchased as inspected" Images and videos serve as examples and do not represent the actual scope of delivery Terms of payment: Prices plus VAT, payment before collection or dispatch Terms of delivery: ex location

Condition: excellent (used), Year of construction: 1999, functionality: fully functional, working width: 1,250 mm, pass-through height: 80 mm, UV System Venjakob - IST LIGNOCURE HL 140-4-N-DL POLYMERIZATION SYSTEM consisting of 2 UV dryers: Dryer 1 Overall length 2100 mm Overall width 2339 mm Workpiece dimensions min. 250 x 20 mm, max. 2500 x 1000 mm Bdodpfx Ajyalc Njhmoh Workpiece height max. 60 mm 1 module with 2 elliptical reflectors (2 UV lamps) Electrode spacing of the IST lamps 140 mm Rotating reflectors Lamp rating per lamp 80 W/cm2 Beam length 1400 mm Lamp power 2 x 11.2 kW Air-cooled housing, capacity 1600 m³/h (motor 1.2 kW) Compressed air consumption 6 NL/h Belt conveyor Vanjakob, year of manufacture 1999, type Novo 40 Length 2100 mm Working width 1300 mm Working height 880 - 920 mm Feed drive 0.75 kW Feed speed 4 – 20 m/min (Line 2 - 4 m/min) Dryer 2 Overall length 3340 mm Overall width 2339 mm Workpiece dimensions min. 250 x 20 mm, max. 2500 x 1000 mm Workpiece height max. 60 mm 1 module with 2 elliptical reflectors (2 UV lamps) Electrode spacing of the IST lamps 140 mm Rotating reflectors Lamp rating per lamp 80 W/cm2 Beam length 1400 mm Lamp power 2 x 11.2 kW Air-cooled housing, capacity 1600 m³/h (motor 1.2 kW) Compressed air consumption 6 NL/h Belt conveyor Vanjakob, year of manufacture 1999, type Novo 40 Length 3340 mm Working width 1300 mm Working height 880 - 920 mm Feed drive 0.75 kW Feed speed 4 – 20 m/min (Line 2 - 4 m/min) Common control cabinet for two drying tunnels 2000 x 1600 x 600 mm Operating voltage 400 V, AC, 50 Hz, 3 phases Total power of the complete UV system approx. 50 kW Operating side of the system is on the left Weight of the complete system approx. 2500 kg (Subject to changes and errors in technical data, as well as prior sale)

Condition: used, For self Adhesive  Labels and Wet Glue Format Parts for Bottle Size 0.375l , 0,75l , 2.0l Technical data: working direction: left-right, rotative, clockwise capacity bph max.: 10000 labels: self adhesive labels, cold glue paper labels number of labelling stations: 4 number of bottle plates: 10 bottle diamater max (mm): 120 bottle diamater min (mm): 50 Bdjdpfxoz Ichbs Ahmoh bottle height max (mm): 350 bottle height min (mm): 160 motor height adjustment: yes speed adjusment: frequence converter

Condition: used, functionality: fully functional, Used pallet racking from SSI Schäfer is among the most popular solutions for efficient and safe warehouse storage. This heavy-duty racking system is ideal for warehouses, industrial companies, and logistics operations that require robust and durable racking for storing Euro pallets. The proven PR600 design offers high load-bearing capacity, maximum flexibility, and is perfectly suited for storing heavy goods. Buying used here means: certified brand quality at a particularly attractive price – immediately available for new installations, retrofitting, or expanding your existing racking system. Customizable: The racking frames (Type P120) can be rebuilt to your desired height – professionally and precisely in our workshop. We provide made-to-measure racking solutions for every warehouse requirement. PRODUCT DETAILS - Height: approx. 9.85 m - Depth: approx. 105 cm - Length: approx. 10,100 cm - Shelf load: 3,000 / 3,500 kg (depending on version) - Bay width: 270 cm (3 × EPAL) - Beams: 270 cm, Type INP100 or CE110 (box profile) Bjdpfx Ahoz H I Scomjdh - Beam colour: Blue - Frame type: P120, galvanized, pre-assembled - Levels: Floor + 4 - Pallet spaces: 540 incl. floor spaces - Version: Used SSI Schäfer PR600 - Availability: Immediately available from stock, multiple sets in stock SCOPE OF DELIVERY: - 037 × frames approx. 9.85 × 1.05 m, galvanized, pre-assembled - 288 × beams approx. 270 cm (INP100 or CE110) - 576 × safety pins Price: €11,844.00 net €14,094.36 gross You will receive an invoice with VAT shown separately. DELIVERY, INSTALLATION & INSPECTION: - Nationwide delivery across Germany via our partner shipping company – freight costs depend on postal code - Professional installation and dismantling by trained teams is optionally available - Racking inspections according to DIN EN 15635 by certified inspectors - Inspection of existing heavy-duty racks from other manufacturers also possible PLANNING & CONSULTATION: Our planning department will gladly prepare a non-binding quote tailored to your requirements. Whether new build, modification, or extension – we provide competent advice for your racking configuration. SHOWROOM: Visit us in our showroom! On site, you can get a comprehensive impression of our pallet racking, shelving, and other solutions. Many systems are assembled and ready to view. Our specialist advisors are available for questions and individual advice – we look forward to your visit! Haven’t found the right solution yet? Visit our website for a quick overview of many offers and product variations! INTERESTED OR HAVE QUESTIONS? Simply contact us by message or phone. You’ll find our phone number on our company page. ☎️ We are available by phone Monday to Friday, 08:00 - 16:00. Alternatively, send us a message with your name and number and we will get back to you as soon as possible.

Condition: used, mileage: 50,000 km, first registration: 09/2021, overall weight: 1,800 kg, fuel type: gasoline, color: white, next inspection (TÜV): 11/2027, gearing type: mechanical, emission class: euro6, number of seats: 2, Equipment: all wheel drive, Piaggio Porter 1.3 flatbed tipper, winter service version including snowplow. German vehicle, one previous owner. ??EXCELLENT CONDITION?? Bdjdpfxoz Igano Ahmsh -Snowplow HILLTIP + salt spreader- -Aluminum storage box- -Tow hitch- Valid TÜV/MOT and emissions test until 11-2027? Sales consultant information: * + * An appointment is required for a test drive or inspection. * + * Trade-in and financing options available. * Errors in the description cannot be ruled out. * Please verify the equipment on the vehicle. Subject to errors, omissions, and prior sale.

Condition: used, axle configuration: > 3 axles, first registration: 11/2006, loading space length: 13,500 mm, loading space width: 2,500 mm, loading space height: 2,240 mm, total length: 13,600 mm, total width: 2,550 mm, total height: 4,000 mm, suspension: air, Year of construction: 2006, Meusburger MPG-4 4-axle sliding tarp semi-trailer Year of manufacture: 2006 First registration: 11-12-2006 Chassis number: W09PG400760M49844 Equipment: 4 axles 1st axle liftable Last 2 axles steered Sliding tarpaulin Sliding roof Support legs Lashing eyes in the loading area Ramp at the rear 2 spare wheels German registration Dimensions: Bdsdez H Tkwjpfx Ahmjh Fifth wheel height: 1.17 m Loading area height: 0.76 m Loading area length: 9.50 m Kingpin length: 4.00 m Internal width: 2.50 m Internal height: 3.24 m Weights: Technical total weight: 47,600 kg Axle loads: 4 x 7,400 kg Permissible fifth wheel load: 18,000 kg The semi-trailer was used in combination with a MAN TGX 26.480 6x2 tractor unit from 2015 with approximately 511,000 km. This tractor unit is also available. Sale as a complete combination is possible. Contact: Haverhoek Trucks B.V. Zweedsestraat 6 7418 BG Deventer Netherlands Tel. E-mail: Website: = Further information = Suspension: Air suspension Front axle: Lift axle; Axle brand: BPW; Tire tread left: 80%; Tire tread right: 80% Middle axle 1: Tire tread left: 75%; Tire tread right: 75% Middle axle 2: Steered; Tire tread left: 75%; Tire tread right: 75% Rear axle: Steered; Tire tread left: 75%; Tire tread right: 75% Unladen weight: 9,800 kg Payload: 37,800 kg GVWR: 47,600 kg

Condition: used, mileage: 50,000 km, first registration: 09/2021, overall weight: 1,800 kg, fuel type: gasoline, next inspection (TÜV): 11/2027, gearing type: mechanical, emission class: euro6, Piaggio Porter 1.3, all-wheel drive, flatbed tipper, winter service equipment including snowplow. German vehicle, one previous owner. ??EXCELLENT CONDITION?? -Snowplow HILLTIP + salt spreader- -Aluminum storage box- -Trailer hitch- Valid TÜV and emissions test until 11-2027? Sales consultant information: * + * AN APPOINTMENT IS REQUIRED FOR A TEST DRIVE OR INSPECTION * + * Trade-in and financing options available. * Errors in the description cannot be ruled out. * Please verify the equipment on the vehicle. Subject to errors, omissions, and prior sale. Bsdpfx Ahsz Igahsmjdh

Condition: used, Year of construction: 2020, Sled length: 3200 mm Cutting width at the rip fence: 1250 mm Cutting width at the crosscut fence: 3200 mm Cutting depth: 120 mm Scoring saw: yes Saw blade height adjustment: handwheel Bjdpfx Aszq Dcushmedh Saw blade swivel adjustment: handwheel Rip fence adjustment: manual Crosscut fence adjustment: manual Saw blade angle indicator: scale Cutting height indicator: - Rip fence indicator: scale Crosscut fence indicator: scale Saw blade diameter: 400 mm Speeds: 3 Motor power: 5.5 kW Dust extraction port: 80 and 120 mm Machine length: 3200 mm Machine width: 2200 mm Weight: 800 kg

Condition: used, mileage: 666,666 km, power: 206 kW (280.08 HP), first registration: 05/1999, fuel type: diesel, tire size: 315/70R22.5, tire condition: 40 %, axle configuration: 4x2, wheelbase: 3,100 mm, fuel: diesel, fuel tank capacity: 300 l, color: white, gearing type: automatic, number of gears: 3, emission class: euro4, suspension: parabolic leaf (spring), total length: 5,900 mm, total width: 2,500 mm, total height: 3,100 mm, Year of construction: 1999, General Information Cab: Day Cab Technical Information Bjdpoz Iaq Hefx Ahmsdh Number of cylinders: 6 Axle Configuration Tire size: 315/70R22.5 Suspension: Parabolic suspension Front axle: Tire tread: 40%; Reduction: single reduction Rear axle: Tire tread: 30%; Reduction: single reduction Weights Unladen weight: 11,000 kg Payload: 24,000 kg GVW: 35,000 kg Condition Damage: none = Company Information = Heisterkamp Used Trucks BV doesn't just sell used trucks – we are a reliable part of Heisterkamp Transportation Solutions. We focus on used trucks and trailers that are ready for immediate use. From our location in Oldenzaal, we carefully select vehicles that are reliable, meet today's requirements, and comply with the high standards of our industry. Details - Address: Hanzepoort 25E, 7575 DB Oldenzaal, Netherlands - Phone: - Email: - Website:

Condition: used, Year of construction: 2020, Used machine Year of manufacture: 2020 Circular saw unit, 0° - 46° swivel, maintenance-free, Saw blade diameter: 250-550 mm Maximum cutting height: 200 mm Saw blade spindle: 30 mm Undertable extraction: 120 mm Parallel fence with fine adjustment Fence ruler length: 1200 mm, can be swiveled Extension table: 1250 x 650 mm Cutting length: 2800/3200 mm Crosscut fence: 3200 mm, can be swiveled 90-45°, 2 fence jaws Kappa 550 control with programmable angle and height positioning, automatic cutting height correction during swiveling. 3-line LED display for height, angle and speed SD Circular saw table extension up to 1620 mm behind the saw axis, aluminum anodized On/off switch on the sliding table Panel saw sliding table: 3200 mm, anodized Swiveling mechanism for extension table Bdodpfxjz Dyfcj Ahmjh Cutting width: 1250 mm Upper guard cutting width: 1250 mm Extraction connection: 100 mm Electrical system: Kappa 550, 3x400V 50Hz CE, 10 kW S6 with star-delta starter 3 speeds: 3000/4000/5000 rpm Quick overview Location: Flörsheim Availability: short notice

Condition: used, Year of construction: 2024, bore capacity in steel (diameter) 32 mm throat 265 mm Bjdsxtfy Hspfx Ahmedh bore stroke 150 mm taper MK 3 MK table-size 390 x 390 mm turning speeds 100 - 3300 U/min total power requirement 1,5 KW weight of the machine ca. 0,35 t dimensions 0,8 x 0,6 x 1,95 m Unused display machine with: - Thread cutting attachment - Variable spindle speed - Coolant system

Condition: excellent (used), mileage: 288,339 km, power: 353 kW (479.95 HP), first registration: 05/2023, fuel type: diesel, tire size: 385/55R22.5, axle configuration: 4x2, wheelbase: 4,000 mm, fuel: diesel, color: white, driver cabin: sleeper cab, gearing type: automatic, number of gears: 12, emission class: euro6, suspension: air, permissible axle load (axle 1): 8,000 kg, permissible axle load (axle 2): 13,000 kg, Year of construction: 2023, Technical Information Number of cylinders: 6 Engine displacement: 12,900 cc Bjdpfx Ajz H Sawshmjdh Transmission Transmission: ZF TraXon, 12 gears, automatic Axle Configuration Brakes: Disc brakes Suspension: Air suspension Front axle: Tire size: 385/55R22.5; Max. axle load: 8000 kg; Tire tread depth left: 70%; Tire tread depth right: 70% Rear axle: Tire size: 315/70R22.5; Max. axle load: 13000 kg; Tire tread depth left: 80%; Tire tread depth right: 80% Condition Technical condition: very good Optical condition: very good Damage: none Warranty Warranty: None

Condition: as good as new (ex-display), overall weight: 7,700 kg, United Austrian Iron and Steel Works press brake Type: AG BAHM 100 4 Capacity: 4000 x 100 tons Bedpfsz Hbu Rsx Ahmodh Weight: 7700 kg The machine can be placed in a museum and is sold as is, where it is.

Condition: excellent (used), Year of construction: 1993, functionality: fully functional, Specifications Manufacturer MONFORTS Model RNC4 Year 1993 Description WE OFFER AN VERY NICE CONDITION MONFORTS CNC LATHE INCLUDING COMPLETE TOOLINGS DRAWERS FOR TOOLS MACHINE HAS LIVE TOOLS , DRIVEN TOOLS MACHINE IS CONECTED ON POWER Bdsdpfx Ahjvk E A Tomeh TECHNICAL INFO: Diameter 420 mm Distance between centers 600 mm CNC system Control System F Tools 12 positions Cross travel 250 mm Longitudinal travel 620 mm Hole through spindle 65 mm Spindle speed 70 - 4000 RPM Motor power 18,5 HP Weight 7500 Kg

Condition: excellent (used), Year of construction: 2009, functionality: fully functional, planing width: 500 mm, tool diameter: 120 mm, number of blades: 4, actuation type: electric, rotational speed (max.): 4,700 rpm, total length of planing tables: 800 mm, total width: 920 mm, total height: 1,140 mm, overall weight: 450 kg, VEBA S500 PLANER | 500 MM | 4 KNIVES | 4.3 kW | 2009 | ITALY | Professional VEBA S500 planer/thicknesser from the renowned Italian company VEBA Meccanica S.r.l. This machine is designed for the precise planing of wooden components to a specific thickness. Its robust, compact design and 4-knife cutterblock make it ideal for use in both carpentry workshops and for the production of solid wood components. Made in Italy, this machine is used and ready for operation. KEY FEATURES: - Renowned Italian brand VEBA - Model S500 - Planing width of 500 mm - 4-knife cutterblock - Traditional knives - Robust construction - 2 feed speeds - Material height range up to approx. 240 mm - Maximum planing depth of 8 mm - Table height adjustment - 2 rollers in the table to facilitate material feed - Machine equipped with CE marking - Year of manufacture 2009 TECHNICAL DATA: - Planing width: 500 mm - Work table dimensions: approx. 500 × 800 mm - Material height range: approx. 4–240 mm - Maximum planing depth: 8 mm - Planing cutterblock: Ø 110 mm - Number of knives: 4 pcs - Type of knives: traditional - Cutterblock rotational speed: approx. 4700 rpm Bdsdoz A A Iwepfx Ahmsh - Feed speed: 6.5 / 13 m/min - Table rollers: 2 pcs - Height adjustment: electric and mechanical MOTOR / POWER SUPPLY: Motor power: 4.3 kW Voltage: 400 V Power supply: 3 phases DIMENSIONS AND WEIGHT: Machine dimensions: approx. 1000 × 920 × 1140 mm Weight: 450 kg – according to the nameplate We invite you to test the machine on-site. Financing options available through leasing or installment plans. WE ORGANIZE TRANSPORT.

Condition: used, axle configuration: 3 axles, permissible axle load (axle 1): 10,000 kg, permissible axle load (axle 2): 10,000 kg, permissible axle load (axle 3): 10,000 kg, first registration: 03/2003, total length: 12,310 mm, total width: 2,540 mm, suspension: air, tire size: 425/65, wheelbase: 9,610 mm, color: other, Year of construction: 2003, Equipment: ABS, = Additional options and accessories = - ADR - Air Suspension - Drum brakes - Steering Axle = Remarks = Superstructure Volume: 48.5 m3 Tank capacity: 48500 liters = More information = Axle configuration Tyre size: 425/65 Make axles: BPW Brakes: drum brakes Suspension: air suspension Rear axle 1: Max. axle load: 10000 kg Rear axle 2: Max. axle load: 10000 kg Rear axle 3: Max. axle load: 10000 kg; Steering Weights Empty weight: 7.760 kg Carrying capacity: 35.240 kg GVW: 43.000 kg Identification Registration number: OH-97-FG Bdjdpfx Ajz Ib Rnjhmjh

Condition: new, Year of construction: 2022, Cantilever rack NEW PRODUCT Data: - H: approx. 400 cm - D: approx. 137 cm - L: approx. 402 cm - Cantilever arms: approx. 120 cm - Axle dimension: 131 cm - NEW PRODUCT immediately from stock. - 500 kg load per arm - 2250 kg load per stand - Stand in hot-dip galvanized. - Cantilever arms in hot-dip galvanized. - Arms are screwed. - Arms adjustable in 200 mm increments. - Levels: base + 3 storage levels (4 storage levels) Shelf consists of: - 04 x stands, including base approx. 400 cm made of IPE160. - 12 x cantilever arms approx. 120 cm made of IPE 80 - including all necessary connecting elements and screws. Why BLT cantilever racks? - Certified German manufacturer DIN EN 1090 - Made in Germany - All specified load-bearing capacities of the shelf uprights and cantilevers are statically verifiable, at 100% load. - All shelving systems are supplied in hot-dip galvanized versions. They can therefore be set up inside and outside and do not rust like painted systems. Consistent appearance for many years. - We use the legally required hot-dip galvanized screw sets in accordance with DIN EN 15048-1 - Long availability guarantee - The stand base and stand back are welded together, which provides additional safety and short assembly times because the feet do not have to be screwed to the stand back. Bedpfoz H N Irex Ahmedh - Angle steel braces, so no adjustment using turnbuckles is necessary. This shortens the assembly time. - No slotted hole system, so no weakening of the stand profile. Price: €2462.00 net + legally applicable VAT. You will receive an invoice with VAT shown. Transport: Delivery is carried out by our partner shipping company on request, the costs for this depend on the postcode. Assembly: If required, our trained staff will be happy to assist you with the professional assembly and disassembly of your business equipment. Our recommendation: Let us know what you need... We will be happy to help you with the realization of your projects, from planning to ordering to assembly.

Condition: used, Immediately available. Bodpfxoz Hb Iks Ahmodh

Condition: used, Year of construction: 1999, color channels: 8, We offer this used Heidelberg Speedmaster 74 8 Color Plus Coater 4/4 offset printing press, year of construction 1999. Manufacturer: Heidelberg Model: Speedmaster 74 8 Color Plus Coater Perfecting 4/4 or Straight Year of manufacture: 1999 Console CPC 1.0.4 Technotrans Cooling Unit Condition: used Category ID: 839 Bsdpsynvurefx Ahmsdh Type ID: 520 Type: offset printing press If you have any questions or need more information, feel free to send us a message or give us a call.

Condition: new, Year of construction: 2022, Cantilever rack NEW PRODUCT Data: - H: approx. 350 cm - D: approx. 137 cm - L: approx. 402 cm - Cantilever arms: approx. 120 cm - Axle dimension: 131 cm - NEW PRODUCT immediately from stock. - 500 kg load per arm - 2250 kg load per stand - Stand in hot-dip galvanized. Bdedpfxez H N D Te Ahmjh - Cantilever arms in hot-dip galvanized. - Arms are screwed. - Arms adjustable in 100 mm increments. - Levels: base + 3 storage levels (4 storage levels) Shelf consists of: - 04 x stands, including base approx. 350 cm made of IPE160. - 12 x cantilever arms approx. 120 cm made of IPE 80 - including all necessary connecting elements and screws. Why BLT cantilever racks? - Certified German manufacturer DIN EN 1090 - Made in Germany - All specified load-bearing capacities of the shelf uprights and cantilevers are statically verifiable, at 100% load. - All shelving systems are supplied in hot-dip galvanized versions. They can therefore be set up inside and outside and do not rust like painted systems. Consistent appearance for many years. - We use the legally required hot-dip galvanized screw sets in accordance with DIN EN 15048-1 - Long availability guarantee - The stand base and stand back are welded together, which provides additional safety and short assembly times because the feet do not have to be screwed to the stand back. - Angle steel braces, so no adjustment using turnbuckles is necessary. This shortens the assembly time. - No slotted hole system, so no weakening of the stand profile. Price: €2356.00 net + legally applicable VAT. You will receive an invoice with VAT shown. Transport: Delivery is carried out by our partner shipping company on request, the costs for this depend on the postcode. Assembly: If required, our trained staff will be happy to assist you with the professional assembly and disassembly of your business equipment. Our recommendation: Let us know what you need... We will be happy to help you with the realization of your projects, from planning to ordering to assembly.