Used Bobst Ketten Greiferstange 142 Cer Bobst for sale (1,173)

Condition: ready for operation (used), Year of construction: 2006, functionality: fully functional, Bobst Mistral 110 HHS 4 glue nossels Prefold 1/3 Codpfxsym A Hxj Adrsrh Straight line Crash lock 4 points glue 6 points glue Max speed 400 meter per minute Till 800 gsm carton , N, F and E Max format 1100 x 800 mm Min format 126 x 60 mm

Condition: excellent (used), Year of construction: 2014, • Substrate width : max 430mm • 8 Flexo Printing Unit • (Fully servo driven: double servo motors on print cylinder and impression roller) • 8 UV dryer • Temperature Control • Driven Chilled Drums • Chilling unit • Front load unwinder with motorized roll lifting • Unwinder with magnetic particle clutch (max. reel diameter 1.000 mm.) • Automatic Web Guide • Video inspection with manual camera movement • Servo Infeed group • 2 Die-cutting stations (male-female die-cutting possible) - servo • 1 Gap Master • Waste matrix rewinder diameter : Snowball 605mm • Servo Outfeed • Organizer (includes crane to remove and store die-cutting tools) • 3 Web break detectors • 3 antistatic bars • Motorized rewinder (max. reel diameter 1.000 mm.) • Local touch screen panel on each printing and die-cutting station • Main touch screen panel (PC MHI) • Direct Internet Connection for remote SW and HW service and upgrades Crodev Tzhqepfx Adreh • Automatic pre-register, register and tension control • Vario™ - Servo driven infeed and outfeed (includes 2 active load cells) • GIDUE mark-to-cylinder ARC register control • Servo driven die-cutting units (1 servo motor per unit) • Second pass register control • Print Tutor™ An "intelligent" camera automatically detects print register and pressure marks and performs completely automatic register adjustment, during the set-up and during production. It includes additional servo motor for lateral register adjustment (lenght register adjustment is built in servo driving motor of the print cylinder. • Delame/Relam 2K • Turn bar • Lamination and cold foil • Corona treater • Web Cleaner •

Year of construction: 1999, condition: good (used), Bobst SP 102E II, ref. 3041 – Year of manufacture: 1999 – Max. format: 1020 × 720 mm – Min. format: 400 × 350 mm Crsdszxa Shepfx Adroh – Max. speed: 7,500 sheets/hour – Caliper range: 80–2,000 gsm – Raised machine height: 46 cm, maximum stack height 174 cm – Counter: 191 million sheets – Retrofitted central lubrication system for the chain and drive cams. – Centerline

Condition: ready for operation (used), Year of construction: 2006, Bobst SP102-BMA Foilmaster Equipped with: Fully Automatic Feeder Double Sheet Control Centre Line Hot Foil Unit 2 x honeycomb chase 2 x die cutting chase 16 Independent Heating Zones Foil Advance Shafts Automatic Delivery Cedpfewgz Rkox Adrsrh Elevated (High Pile) Specification: Sheet Format Max: 720mm x 1020mm Sheet Format Min: 350mm x 400 mm Working Material Paper/Solid Board: 80-2000gr Corrugated Board: "E" and "B" - max. 4mm Gripper margin: 9-15mm Stamping Format: Max 680mm x 1010mm Max speed: 7,500 p/h

Condition: excellent (used), Year of construction: 2007, functionality: fully functional, machine/vehicle number: 1420099235, Ideal machine for high-volume series production when cutting at 90° and 45° Equipped with E 111 digital display and handwheel adjustment. Vertical pneumatic material clamping unit Cutting length variant 3,000 mm Tilting range pneumatically from 90° to 45° Saw blade diameter 500 mm Saw blade speed 2,800 rpm Cedpezx Eqcofx Adrerh Power supply 230/400 V, 3~, 50 Hz Power output 4 kW Compressed air supply 7 bar

Year of construction: 2013, condition: good (used), • Max Sheet Size: 1,060 x 760 mm • Min Sheet Size: 400 x 350 mm • Max Cutting Size: 1,060 x 745 mm • Gripper Margin: 10 mm • Max Mechanical Speed: 7,700 sheets/hour • Paper Range: o Paperboard: 90–2,000 g/m² o Corrugated board: up to 4 mm (depending on flute) • Cutting Force: 260 tons • Pile Height (Feeder/Delivery): o Feeder: up to 1,350 mm o Delivery: up to 1,150 mm • Feeder Type: Non-stop Crsdpfx Adow E Iumoreh • Delivery Type: Non-stop • Register System: Optical and mechanical sheet alignment • Die-Cutting Plate Size: 1,080 x 760 mm

Condition: excellent (used), Year of construction: 2009, functionality: fully functional, cutting length (max.): 4,500 mm, saw blade diameter: 550 mm, Double mitre saw Elumatec DG 142/01 Cutting length min 300, max 4500 mm Codpszi Uxdofx Adrerh Max. saw blade diameter 500 mm Pneumatic angle adjustment 45-90 degrees Digital angle display Automatic length positioning Moving roller conveyor Pneumatically foldable support arms Label printer

Condition: good (used), Year of construction: 2016, overall weight: 10,000 kg, Equipment: documentation/manual, For Sale: - Manufacturer: ABB / Stelram - Brand: ABB / Stelram - Type: 2 robot cells, each with 4 pick and place robots. Total: 8 robots - Vacuum: Becker pumps - Camera system / Vision system Included: - Power cabinet - Manuals, software, spare parts lists, introduction lists, pneumatic and electrical diagrams - Infeed conveyor - 2 robot cells - 2 camera boxes - Conveyor belts Dimensions, complete with infeed: Length x width x height: 19.50 meters x 2.70 meters x 2.95 meters Transport and dismantling can be provided by us. This large robot cell is suitable for high speeds and larger products. Csdpfx Aeznd Skedrjrh If you have any questions or comments, please feel free to contact us. Sincerely, Leo Holland

Year of construction: 2007, condition: good (used), • Model: BOBST Autoplatine® SPanthera 106 LER • Machine Type: Automatic flatbed die-cutting machine with stripping and blanking Crsdpfexzr Hpex Adreh • Manufacturer: BOBST • Category: High-performance die-cutter for folding carton & packaging • Year of Manufacture: 2007 • Production Status: "Machine under power" _____ Format & Substrate Capabilities • Max. Sheet Size: 760 × 1,060 mm • Min. Sheet Size: approx. 350 × 400 mm • Max. Cutting Size: 745 × 1,055 mm • Gripper Margin: approx. 8–10 mm • Paperboard Thickness: 0.1 – 2,000 g/m² (from paper to heavy board) • Corrugated Board: up to N-flute / F-flute (depending on tooling) • Max. Cutting Pressure: up to 260 t (BOBST Autoplatine standard) _____ Production & Performance • Maximum Mechanical Speed: up to 9,000 sheets/hour • Automatic Register System: Included • Blanking Capability: Yes (LER = Logistics, Extraction, Removal = full blanking section) • Stripping Section: Fully automatic 3-frame stripping • Non-Stop Functionality: o Non-stop feeder (continuous pile logistics) o Non-stop delivery (automatic pile change)

Year of construction: 2006, condition: excellent (used), Bobst Autoplatine Speria 106 E STANDARD EQUIPMENT MACHINE - Centerline system for quick job changeover. - Electronic sheet travel monitoring system. - Adjustable centering at the stripping station. - Control cabinet air conditioning unit. - Bobst electronic control system C.U.B.E. (Control Unit Bobst Electronic). This microprocessor-based Bobst system allows the operator to easily manage, visualize, and monitor the machine’s various functions and components. - Main motor with frequency inverter control. FEEDER - Pile tray with handle for easy manual lateral alignment during production. - Synchronization device ensuring proper sheet arrival to the front lays when the machine is stopped. - Automatic pile lifting controlled by pressing foot. - Rear pile guides (operator side and opposite operator side). - Adjustable side blowers with Centerline markings. - Suction unit. FEED TABLE - Feed table with anti-static stainless steel covering. - Feed table entrance equipped with lateral ramps. - Four front lays, pairwise adjustable, with front register control. - "Pull" guide (operator side), adjustable with Centerline markings and side register control. - Double sheet detector. - Support plates at platen station entry. - Sheet hold-down mechanism (guides sheets to front lays). - Upper frame with manual lifting device. - Upper transport system for paper, paperboard, and corrugated board. - Transport belts with lateral guides and automatic tensioning system. PLATEN - Gripper reopening device. - Centering and locking for equipment. - Locking the chase to the upper beam. - Cutting force measurement with strain gauge. 1 synthetic supporting plate. 1 upper chase: fixed bottom plate. 1 cutting plate. WASTE STRIPPING STATION - Air-cylinder-driven upper frame lifting. 1 upper pull-out frame (with crossbars and clamps). 1 lower pull-out frame. DELIVERY - Pile tray. - Front jogger. - Adjustable rear and side joggers with Centerline markings. - Braking brush. - Manual non-stop rack. AVAILABLE EXTRAS B MACHINE 1 B-1 Raised machine base C FEEDER 1 C-4 Manual non-stop device E PLATEN 1 E-5 Compensating plate 1 E-55 Micro-adjustable supporting plate centering F WASTE STRIPPING STATION Codpfx Aoxl Talodrerh 1 F-31 Quick-lock device for the upper pull-out frame

Condition: excellent (used), Year of construction: 2001, Ref: 10900 . 2001 Bobst SP102-BMA Foilmaster Excellent condition! Only 33,000 hours worked! Equipped with: Fully Automatic Feeder Double Sheet Control Centre Line Hot Foil Unit 2 x honeycomb chase 2 x die cutting chase 16 Independent Heating Zones Foil Advance Shafts Automatic Delivery Elevated (High Pile) Specification: Sheet Format Max: 720mm x 1020mm Sheet Format Min: 350mm x 400 mm Working Material Paper/Solid Board: 80-2000gr Corrugated Board: "E" and "B" - max. 4mm Gripper margin: 9-15mm Stamping Format: Max 680mm x 1010mm Max speed: 7,500 p/h Codpfx Adsu Snwmerorh

Year of construction: 2000, condition: good (used), BOBST SP 104 E Type: Autoplaten Die Cutter Year: 2000 Technical Specifications: Maximum sheet size: 740 x 1040 mm Minimum sheet size: 350 x 400 mm Maximum speed: 8,000 sheets/hour Maximum cutting force: 250 tons Operating hours: approx. 35,000 Configuration and Equipment: Manual non-stop feeder Synchronization device Pull side lay guide 2 cutting chases 1 cutting plate (4 mm) Centerline system Micrometric adjustment device (for 1 mm plates) C.U.B.E. system Stripping section 1 set of stripping frames (quick locking) including tools Non-stop delivery Condition: Machine is in good working condition Inspection under production possible upon request _____ Key Advantages: Reliable and proven BOBST technology High cutting force of 250 tons – suitable for a wide range of applications Equipped with stripping section and non-stop delivery for efficient production Centerline system for quick job changeovers Well-maintained machine with relatively low operating hours _____ Crsdpfxeyz Adno Adroh

Year of construction: 1968, condition: ready for operation (used), AUTOPLATEN BOBST SP 1260 E / AUTOMATIC FLATBED DIE-CUTTER STRIPPING / Year Of Production: 1968 / Max. Sheet Size: 1.260 x 920 mm / Min. Sheet Size: 500 x 350 mm / Maximum Speed: 5.000 Sheets Per Hour / Max. Solid Board Thickness: 1,5 mm / Max. Corrugated Board Thickness: 3 mm / Maximum Cutting Pressure: 500 Tons / Weight: 19 Tons / Main Dimensions: 6.075 x 2.840 x 2.200 mm Credpfex R R R Uex Adroh

Year of construction: 2004, operating hours: 37,800 h, condition: like new (used), functionality: fully functional, Top maintained high premium die cutter for fast setup and TOP quality jobs Technical data: Paper up to 70 gsm Cardboard up to 1000 gsm Corrugated board up to 2 mm Max. format: 1060 x 760 mm Min. format: 400 x 350 mm Press force: 260 t Speed up to 9,000 sheets/hour Equipment: Credsyaq S Aepfx Adroh Stripping station Optical register control Automatic pile alignment Ultrasonic double sheet control Centerline Microplate Plate 4 mm 2 closed frames Non-stop delivery Alignment table Height raised by 220 mm

Condition: used, Year of construction: 1988, BOBST Printing Machine with 4 bottom colors anilox cilinders 120l/cm and 80l/cm Crsdev Ifpuspfx Adrjh TRANSFER BOBST FLATBED DIE CUTTER BOBST AUTOPLATINE SPO 1600, max format 1100 mm x 1600 mm / 43.3" x 63" with 4 Bottom Printing unit and transfer Bobst * Vacuum feeder * Die cutting section * Waste elimination section * Centerline II * High pile delivery with two lifting tables * Max sheet format: 1100 mm x 1600 mm / 43.3" x 63" * Min sheet format: 520mm x 600mm / 20.5" x 23.6" * Cutting force: 400 t * Materials: E, B, C, CB, BE flutes * Max speed: 6,000 sheets/hour Possibility to sell them separately

Condition: ready for operation (used), Fully Automatic Flatbed Die-Cutter, Crodewly D Hjpfx Adrjh Non-Stop Feeder, Automatic Vacuum Plate, Double Sheet Cleaning Station, Turn Die Cutting Frame, (Batch Delivery) Non-Stop Delivery With Belt, Cutting Force 300 TON, Up to 4.500 Speed/H, Working With Corrugated Cardboard Of Thickness Max. 9mm, Min. 0,9mm, Format: Max. 1055x1575mm, Min. 400x600mm, Standard Accessories Bobst SPO 1575 EG 1980, fully rebuilted 2015, chain changed 2024.

Condition: good (used), Year of construction: 1997, functionality: fully functional, saw blade diameter: 500 mm, For Sale – Elumatec SA 142/25 Aluminum Saw (1997) Machine: Elumatec SA 142/25 Crodpfx Adexz R Ixersh Type: Automatic aluminum cutting saw (suitable for aluminum and light-metal profiles) Year: 1997 🔧 Technical Specifications Saw blade diameter: 500 mm Blade rotation speed: 2800 rpm Feed length per cycle: 5–600 mm Cutting angle: 90°, with possible bevel/mitre capability depending on machine configuration Power supply: 230/400 V, 3-phase, 50 Hz Air supply required: 7 bar Suitable materials: Aluminum profiles, thin-wall light-metal profiles, window/door profiles and general industrial aluminum cutting ✅ Features & Benefits Reliable industrial saw designed for high-volume aluminum profile cutting Strong and stable construction with a 500 mm blade for fast, clean cuts Step-feed system (5–600 mm) enables efficient serial production and flexible cutting lengths Ideal for window & door manufacturers, metal workshops, façade builders, and any company working with aluminum extrusions Simple, durable design – easy to maintain, spare parts widely available 📌 Notes Requires 3-phase electrical connection and compressed air (7 bar) Angle-cutting functionality should be verified depending on the machine’s configuration Machine condition and accessories can be confirmed upon inspection. Chip vacuum is included in this sale! Please verify the accuracy of the machine specifications with the seller.

Condition: used, functionality: fully functional, machine/vehicle number: 41052, Helium leak detector, type Alcatel ASM 142, for highly precise leak testing of vacuum systems, pipelines, containers, valves, and other technical components. The device is suitable for maintenance, troubleshooting, and quality control in industry, research, and plant engineering. Crodpfsz Hxwcsx Adrjh Helium is used as the test gas because it occurs in the atmosphere in only very low concentrations, which means that even the smallest leaks can be reliably detected.

Condition: ready for operation (used), Year of construction: 1983, BOBST SPO 1600 Crjdpfjxcayyex Adrjh Max Speed 5000 per hour Year 1983 Max lenght 1075mm Max width 1580mm Fully reconditioned by Bobst 2015 Central line

Year of construction: 1984, condition: good (used), BOBST I 130 ER Automatic Die-Cutting Machine Year of manufacture: 1984 2. Sheet Formats Maximum sheet size: Cedpfxeycv Dvj Adrorh 920 x 1,300 mm Minimum sheet size: 450 x 580 mm Working format: – Max. 890 x 1,270 mm (open chase) – Max. 900 x 1,300 mm (closed chase) 3. Material Specifications Maximum board thickness: 1.5 mm (cardboard) Minimum grammage: 90 g/m² Gripper margin: 10 mm 4. Chase Sizes – 915 x 1,300 mm chase without bar – 840 x 1,300 mm chase with bar 5. Pile Heights (Non-Stop Operation) Feeder pile height: Max. 1,500 mm with pallet Delivery pile height: Max. 1,400 mm with pallet Maximum pallet size: 900 x 1,300 mm 6. Equipment and Features – Suitable for carton and paper processing – Not suitable for corrugated board – Stripping possible using stripping frame and separation grid – EMS side lay system for alignment according to printed marks

Condition: excellent (used), Year of construction: 1987, Universal non stop Feeder In line pile preparation 4 fron lays Pull guide OS 16 INDEPENDENT HEATING ZONES Crjdpevyn Ttsfx Adreh Honeycomb Leteral guiding device for foil Motorized foil tension, air cooling Size 102x72 cm Min size 40x35 cm Speed with hot stamping 5000 per hour max Speed for die cutting 7500 per hour max

Condition: excellent (used), Year of construction: 2017, It has only worked for 445 hours. Very good technical condition. Ready for operation. The machine is designed for cutting aluminum and PVC. Cedpfozgu Efsx Adrjrh E 580 control system. Blade diameter: 500 mm. Cutting according to the outer dimension, without correction. Blades guards are automatically lowered and raised. Pneumatic adjustment of the cutting angle from 45 to 90 degrees. Printer included.

Condition: used, Year of construction: 2009, Saw blade diameter 500 mm. Manual angle adjustment from 90° to 45°. Lower blade feed into the cut. 4 kW motor (400 V). Pneumatic upper profile clamping. Blade cooling and lubrication system. Extraction unit with chip collection container. Seldom used. Crjdpfoy Rhy Tex Adrsh

Condition: good (used), Year of construction: 2011, machine/vehicle number: 1423530534, Offer 26120 Technical specifications: - Saw blade diameter approx. 500 mm - Saw blade speed: 2800 rpm - Cutting area e.g. up to approx. 180 x 150 mm 150 x 200 mm - Feed length for 90° cuts: 5 - 600 mm - Mitre cuts possible up to 45° - Compressed air connection: 7 bar - Air consumption per work cycle without / with spraying: 50 / 64 l - Drive: 400 V / 4.0 kW Cedpfx Adey Efl Nororh - Space requirement approx.: W 2750 x H 1600 x D 1350 mm - Weight approx. 800 kg - Incl.: - Digital display - Pneumatic vice - Automatic shut-off at profile end

Condition: used, Year of construction: 1992, functionality: fully functional, BOBST Domino 72 Folder Gluer for sale! Year 1992 Cold glue system ERO with 2 glue guns Max width 720mm Min width 126mm Max speed 400m/min Compact cardboard up to 600g/m². Automatic bottom system Cedpfexlki Rsx Adrerh Counter ejector