Used Boge Gate Valve Screw Compressor for sale (14,033)

Year of construction: 2018, condition: used, Screw compressor Manufacturer: Renner Type: RS132D Year of manufacture: 2018 Technical data - Main drive motor: direct drive of the compressor stages via a shaft coupling - Oil filter / thermostat unit: regulates the cooling of the compressor oil and filters it - Oil-injected compressor stage: compressed air generation - Suction regulator: regulates the amount of air drawn in by the compressor - Control cabinet: controls and regulates the compressor system - Suction air filter: filters the air drawn in - Radial fans: generate cooling air for the oil and compressed air coolers - Compressed air outlet: connection point for an external compressed air network - Minimum pressure retaining valve: maintains a minimum system pressure for oil supply, separates network / system pressure - Fine oil separator with oil suction line, sight glasses, and check valve: oil separation via air-oil filter cartridges, return of separated oil from the compressed air - Safety valve: relieves pressure in case of overpressure - Oil filler plug with oil level monitoring: electronic oil level monitoring - Oil drain: drains the oil reservoir - Compressed air / oil combined cooler: cools the compressed air and the compressor oil - Control system: RENNERtronic - Integrated standby heater Compressor - Counterclockwise rotation (without gearbox) / Clockwise rotation (with gearbox) Suction regulator The suction regulator is mounted directly on the screw compressor. It regulates the volume flow of air drawn in by the screw compressor through the suction filter. Operating principle of the suction regulator: The suction regulator has only one main valve. This valve operates as a stepless control valve as well as a tightly closing shut-off valve. In full-load operation, the suction cross-section is fully open with minimal pressure drop. In part-load operation, the suction cross-section is automatically regulated by limiting the stroke and adjusted to the actual air requirement. When the system is stopped, this valve quickly and automatically closes the entire suction cross-section completely. The multiple functions of the regulator are initiated by only one control unit. Hnodpozu Aibsfx Akrsu Minimum pressure retaining valve The minimum pressure valve is located at the compressed air inlet of the air aftercooler. It performs two functions: 1) As a pressure retaining valve, it prevents the pressure from dropping below a minimum overpressure of 4.5 bar when there is no back pressure. This pressure is necessary to ensure the oil supply to the compressor. At the same time, this minimum overpressure is required for good oil separation. 2) As a check valve, it prevents the backflow of compressed air from the compressed air network or the pressure vessel into the compressor system. This allows the separator vessel to be completely relieved when the system is shut down. The valve operates automatically. Adjustment of the minimum pressure valve may only be carried out by personnel authorized by the manufacturer! Suction air filter The suction air filter is installed in the housing and connected to the suction regulator via a ventilation hose. The micro-dry filter with a fineness of 10 μm is used to filter the suction air. The filter can be cleaned several times before it needs to be replaced. Use only original replacement filters! Pressure transmitter The pressure transmitter, used in all systems with electronic control (RENNERtronic / -Plus), is connected to the compressed air outlet (network press

Year of construction: 2018, condition: used, Compressor with refrigerant dryer Manufacturer: Boge Type: S 111-4 Year of manufacture: 2018 Hnjdpozu Alvsfx Akrou Technical data - Volume flow: 17.10 m³/min - Final compression pressure: 10 bar - Motor speed: 1490 min-1 - Motor power: 110 + 3 kW Refrigerant dryer Manufacturer: Boge Type: DS220 Year of manufacture: 2017 Note: The technical data and descriptions are copies of the original order confirmation. The information is provided for informational purposes only and is not binding.

Condition: used, Year of construction: 2016, machine/vehicle number: CD10024721001, Article description Version: V2 Compressor unit serial number: FK0767480 Order number: 3821761 Hodpfsz Szq Rsx Akrenu Volumetric flow rate: 1.87 m³/min Pressure: 7.5 bar Motor power: 11 kW Speed: 3000 rpm Power supply: 400 V / 3-phase / 50 Hz Full load current: 24 A

Condition: used, Year of construction: 1998, operating hours: 120,000 h, functionality: fully functional, machine/vehicle number: S97125902, power: 200 kW (271.92 HP), volume flow: 34.1 m³/h, pressure (max.): 7.5 bar, type of cooling: air, Atlas Copco ZT 200 – oil-free rotary tooth compressor including MD 600 dryer For sale is a well-maintained and fully functional compressed air system consisting of an Atlas Copco ZT 200 compressor and an Atlas Copco MD 600 dryer. The system comes from a professional industrial application and was maintained, inspected, and repaired there using exclusively original Atlas Copco maintenance parts, as specified by the manufacturer. The condition is good for its age, the system is operational and fully functional. Technical data – Compressor: Atlas Copco ZT 200 Type: oil-free rotary tooth compressor Model: ZT 200 Power: 200 kW Max. operating pressure: 7.5 bar Operating hours: approx. 120,000 h Hodpjz E U T Rofx Akrenu Speed: 1,495 rpm Year of manufacture: 1998 Serial number: S97125902 Manufacturer: Atlas Copco Airpower, Belgium Control: Atlas Copco Elektronikon Drum dryer – Atlas Copco MD 600 Type: MD 600 Atlas Copco control with SMARTLINK Year of manufacture: 2023 Operating hours: approx. 4,300 h Serial number: APF268209 Manufacturer: Atlas Copco Airpower, Belgium The compressor and the dryer are part of the offer and will be sold only together. Condition: used, good for its age, technically well-maintained, regularly serviced and inspected, fully functional. Inspection possible by arrangement. Further technical documents or information available upon request.

Condition: good (used), Year of construction: 1997, For sale are 2 identical Atlas Copco screw compressors. Manufacturer: Atlas Copco Type: ZR 75 / 10 Serial Number: AIF 042705 = Compressor 1 Serial Number: AIF 053082 = Compressor 2 Operating Hours: 94620 h = Compressor 1 Operating Hours: 96461 h = Compressor 2 Voltage: 400 V Power (kW): 76 Air flow rate in m³/min: 10.4 Max. air pressure in bar: 10 Both compressors have been maintained by the manufacturer according to the maintenance schedule (reports available). After approximately 60,000 operating hours, a stage replacement was carried out on both units. The motor was also replaced on both compressors. Hsdpfoz Rntiox Akrenu The units are in good condition. Price: €6,900 per compressor Inspection is possible and encouraged (93499 Zandt).

Condition: good (used), Year of construction: 2014, power: 14.8 kW (20.12 HP), volume flow: 1.63 m³/h, pressure (max.): 7.75 bar, Atlas Copco SF 15 FF Air Compressor Manufacturer: Atlas Copco Model: SF 15 FF Year of manufacture: 2014 Maximum pressure: 7.75 bar Free air delivery: 4.95 m³/min Air flow: 27.1 l/s, 1.63 m³/min Motor power: 14.8 kW = 20 HP Motor speed: 2,885 rpm Weight: 595 kg Hjdpfx Aoxk U Dcekrsnu Power supply: 400 V, 50 Hz, 3 phase Design: Oil-free ISO class: 8573-1 Class 0 Features: Integrated Workplace Air System™, equipped with SMARTLINK Control: Elektronikon Origin: Made in Belgium No guarantee is given for the accuracy, completeness, or currency of the information provided.

Condition: used, Year of construction: 2001, operating hours: 90,000 h, overall weight: 7,000 kg, power: 355 kW (482.67 HP), operating pressure: 10 bar, pressure (max.): 10 bar, type of cooling: water, Good working oil-free compressor, also suitable for spare parts (motor, airend, coolers) Hedpexbdppjfx Akrjnu

Condition: repair required (used), Year of construction: 2004, Schneider compressed air screw compressor defective Hnodpovmivcsfx Akrju System needs to be repaired. Machine is being sold cheaply because it needs to be repaired. Engine power: 11 KW Volume flow: 1500 liters/min Compressor pressure: 10 bar Location: from warehouse 54634 Bitburg Machine is being sold as defective Without guarantee - without warranty -

Condition: like new (used), Year of construction: 2022, functionality: fully functional, Equipment: documentation/manual, refrigerant dryer, type plate available, Container includes the following contents: - 10ft storage container, new / Color: Anthracite grey - SSC-Strong 37 Vario • Speed-controlled screw compressor • Free air delivery at 8 bar: 6.3 m³/min • Dimensions (LxWxH): 1432 x 1000 x 1480 mm • Weight: 705 kg - 2 compressed air tanks, 500 l each o With AD2000 certification o Horizontal design - 2 Ecomat 31 condensate drains - 2 sets of fittings - SCC refrigerant dryer DRA480 o ISO 8573-1 Class 4 o Refrigerant: R407C Hnsdpfx Akoxc T Evsrsu o Capacity: 480 m³ - Pre-filter FIL934-P - Fine filter FIL934-M The compressor has seen very little use and therefore has low operating hours. Upon request, we can read the operating hours and run the compressor for demonstration.

Condition: excellent (used), Year of construction: 2010, machine/vehicle number: API429763, overall weight: 490 kg, fuel type: electric, volume flow: 216 m³/h, pressure (max.): 13 bar, Atlas Copco GA18VSD screw compressor with variable speed drive for compressed air supply in workshops and industry. Hnedjz Hck Hspfx Akrou TECHNICAL DATA – AS PER NAMEPLATE Manufacturer: Atlas Copco Model: GA18VSD Year of manufacture: 2010 Motor power: 18.5 kW / 25 hp Maximum permissible operating pressure: 13 bar Volumetric flow rate Qv as per nameplate: 60 l/s / 3.6 m³/min Power connection: 400 V, 50 Hz, 3 phases Weight: 490 kg Serial number: API429763 EQUIPMENT AND CONDITION Frequency-controlled drive (VSD) and sound-dampening enclosure. Technical and visual condition according to available information: very good. Maintenance and service history available; last reported service: 24.01.2025. Current operating hours are not available. An integrated refrigeration dryer is not confirmed and is not offered as a guaranteed component. LOCATION AND INSPECTION 65618 Selters, Germany. Inspection and collection by arrangement. Coordinate the scope and procedure of loading before collection. Price: EUR 5,750 net, negotiable, plus statutory VAT. Reference: RQ449789FA

Condition: used, Year of construction: 2013, operating hours: 33,213 h, functionality: fully functional, power: 25 kW (33.99 HP), pressure (max.): 8.5 bar, ambient temperature (min.): 3 °C, ambient temperature (max.): 45 °C, We are offering this used Kaeser ASD 47 SFC screw compressor, manufactured in 2013, for sale. Model: ASD 47 SFC Material Number: ASD.2 Serial Number: 3248 Year of Manufacture: 2013 Rated Power: 25.0 kW Motor Speed: 2945 1/min Max. Operating Pressure: 8.5 bar Ambient Temperature: 3 °C / 45 °C Hnodpfez Dgatsx Akrsu Additionally, you can purchase 2 Kaeser compressed air filters in like-new condition, 1 Kaeser Aquamat CF 6 oil-water separator, and an OKS 900L air receiver. If you have any questions or require further information, please do not hesitate to send us a message or call us.

Condition: new, For sale: GEFA butterfly valve, DN200, with Proval actuator. - NEW. Hnjdpfoz Sk Nwex Akrsu - PRICE INDICATED IS PER UNIT.

Condition: new, Year of construction: 2023, feed pressure 10.0 bar Effective free air delivery 700 L/min motor 400 V 0 250 Liter weight of the machine ca. 397 kg. total power requirement 5.5 kW range L-W-H 1915 x 650 x 1640 mm Exhibition machine / not yet in use new BOGE SOLID model series ~ List price: 8.848 euros / special price on request Made in Germany Furnishing: - with container and dryer / can be used immediately Hnsdpsxaahxjfx Akrsu - Microprocessor control SOLID base control - Network pressure sensor - Belt driven drive system - low compressed air temperature due to effective aftercooler - lying underneath compressed air tank - including cold compressed air dryer * automatically working with pre- and post-filter ( mounted ) (also available with 7.5 bar)

Condition: like new (used), Year of construction: 2014, operating hours: 2 h, functionality: fully functional, machine/vehicle number: 1058, overall weight: 7,000 kg, total length: 3,706 mm, total width: 2,276 mm, total height: 2,360 mm, power: 315 kW (428.28 HP), volume flow: 2,382 m³/h, operating pressure: 15 bar, pressure (min.): 4 bar, pressure (max.): 15 bar, noise level: 79 dB, type of cooling: air, Equipment: compressor, documentation/manual, type plate available, Kaeser FSD571SFC, 315kW Variable speed drive screw compressor, purchased and installed in 2014, the machines were never commissioned or used, so have only 2 hours manufacturers hours use. Can be viewed running in our facility in York UK prior to purchase Hodpezww H Tofx Akronu

Condition: used, Year of construction: 1998, operating hours: 120,000 h, functionality: fully functional, machine/vehicle number: S97125901, power: 200 kW (271.92 HP), volume flow: 34.1 m³/h, pressure (max.): 7.5 bar, type of cooling: air, Atlas Copco ZT 200 – oil-free rotary tooth compressor including MD 600 dryer For sale is a well-maintained and fully functional compressed air system consisting of an Atlas Copco ZT 200 compressor and an Atlas Copco MD 600 dryer. The system comes from a professional industrial application and was maintained, inspected, and serviced there exclusively with original Atlas Copco maintenance parts, as specified by the manufacturer. The condition is good for its age; the system is operational and fully functional. Technical data – Compressor – Atlas Copco ZT 200 Design: oil-free rotary tooth compressor Type: ZT 200 Power: 200 kW Max. operating pressure: 7.5 bar Operating hours: approx. 120,000 h Speed: 1,495 rpm Year of manufacture: 1998 Serial number: S97125901 Manufacturer: Atlas Copco Airpower, Belgium Control: Atlas Copco Elektronikon Hedpfx Akez E U Smorsnu Drum dryer – Atlas Copco MD 600 Type: MD 600 Atlas Copco control with SMARTLINK Year of manufacture: 2023 Operating hours: approx. 4,300 h Serial number: 605608 Art.-No.: 170-016733 Manufacturer: Atlas Copco Airpower, Belgium The compressor and the dryer are part of the offer and will only be sold together. Condition: used, in good condition for its age, technically well-maintained, regularly serviced and inspected, fully functional. Inspection possible by arrangement. Further technical documents or information available upon request.

Condition: excellent (used), Year of construction: 2019, operating hours: 2,092 h, functionality: fully functional, machine/vehicle number: IT J320209, overall weight: 447 kg, total length: 1,935 mm, total width: 655 mm, total height: 1,680 mm, volume flow: 270.122 m³/h, operating pressure: 13 bar, pressure (min.): 5 bar, pressure (max.): 13 bar, noise level: 64 dB, type of cooling: air, Equipment: documentation/manual, refrigerant dryer, type plate available, The compressor is in excellent condition!!! The electronics have been completely replaced!!! Only 2029 operating hours. Hnjdpfxoz Ah Uxs Akreu For sale due to downsizing of the machine park!!!!...Completely overhauled, including filter replacement.

Condition: used, Year of construction: 2019, power: 30 kW (40.79 HP), volume flow: 4.95 m³/h, pressure (max.): 12.75 bar, Atlas Copco AQ30VSD FF Air Compressor Manufacturer: Atlas Copco Model: AQ30VSD FF Year of manufacture: 2019 Country of origin: Belgium Maximum pressure: 12.75 bar Power: 30 kW Free air delivery: 4.95 m³/min Air flow rate: 82.5 l/s, 174.8 cfm, 4.95 m³/min Hodpfjxk U Arsx Akrsnu Motor power: 40 HP Motor speed: 8,600 rpm Weight: 702 kg Power supply: 400 V, 50 Hz, 3 phase Design: Oil-free ISO class: 8573-1 Class 0 Control system: Elektronikon Graphic Equipment: SMARTLINK Origin: Made in Belgium No liability is accepted for the accuracy, completeness, or timeliness of the information provided.

Condition: excellent (used), Year of construction: 2011, operating hours: 53,400 h, functionality: fully functional, power: 22 kW (29.91 HP), volume flow: 2.94 m³/h, pressure (max.): 11 bar, ambient temperature (min.): 3 °C, ambient temperature (max.): 45 °C, Serial nr. 1170 Hnedpfoym Axzox Akrsu Maintenance carried out by Kaeser

Condition: used, Year of construction: 2002, operating hours: 31,326 h, functionality: fully functional, machine/vehicle number: AII265384, overall weight: 460 kg, power: 15 kW (20.39 HP), fuel type: electric, pressure (max.): 8.5 bar, Equipment: type plate available, We are offering this used Atlas Copco GA15 FF reciprocating compressor, manufactured in 2002. Manufacturer: Atlas Copco Model: GA15 FF Hjdpfxsz Ilfcj Akrenu Year of manufacture: 2002 Condition: used Serial number: AII 265384 Type: screw compressor Maximum operating pressure: 8.5 bar Shaft speed: 3000 rpm Rated shaft power: 15 kW Effective delivery rate: 40.8 l/s If you have any questions or require further information, please send us a message or call us.

Condition: used, Year of construction: 2002, functionality: limited functionality, machine/vehicle number: AII 265383, overall weight: 460 kg, power: 15 kW (20.39 HP), fuel type: electric, pressure (max.): 8.5 bar, Equipment: type plate available, We are offering this used Atlas Copco GA15 FF reciprocating compressor, manufactured in 2002. Manufacturer: Atlas Copco Model: GA15 FF Year of manufacture: 2002 Hodpez Ilf Ajfx Akronu Condition: used Operating hours cannot be read; the display has a minor defect (see image). Serial number: AII 265383 Type: screw compressor Max. operating pressure: 8.5 bar Shaft speed: 3000 rpm Rated shaft power: 15 kW Effective delivery rate: 40.8 l/s If you have any questions or require further information, please send us a message or call us.

Condition: new, Year of construction: 2022, feed pressure 10.0 bar Effective free air delivery 1.950 L/min motor 400 V 0 250 Liter weight of the machine ca. 467 kg. total power requirement 15.0 kW range L-W-H 1915 x 650 x 1640 mm Exhibition machine / not yet in use new BOGE SOLID model series ~ List price : 13.576 euros / special price on request Made in Germany Furnishing: - with container and dryer / can be used immediately - Microprocessor control SOLID base control - Network pressure sensor - Belt driven drive system - low compressed air temperature due to effective aftercooler - lying underneath compressed air tank - including cold compressed air dryer Hedow U U Scjpfx Akrsnu * automatically working with pre- and post-filter ( mounted ) (also available with 7.5 bar)

Condition: excellent (used), Year of construction: 2008, volume flow: 2.61 m³/h, pressure (min.): 11 bar, KAESER ASD 32 screw compressor Motor: 18.5 kW Capacity: 2.61 m³/min Pressure: 11 bar COMPRESSOR IN FULLY OPERATIONAL CONDITION. Hodjz Nz Taspfx Akronu

Condition: used, Year of construction: 2005, operating hours: 43,152 h, functionality: fully functional, machine/vehicle number: API570324, overall weight: 1,076 kg, total length: 1,700 mm, total width: 900 mm, total height: 1,600 mm, space requirement length: 2,700 mm, space requirement width: 1,900 mm, space requirement height: 2,100 mm, power: 37 kW (50.31 HP), fuel type: electric, volume flow: 406.8 m³/h, operating pressure: 13 bar, pressure (max.): 13 bar, Equipment: documentation/manual, refrigerant dryer, type plate available, Complete industrial compressed-air package comprising an Atlas Copco GA37 VSD 37kW variable-speed rotary screw compressor together with a 2018 Hi-Line Tundra 300 refrigerated air dryer. The variable-speed drive automatically adjusts compressor output according to air demand, making this an efficient solution for industrial applications with varying compressed-air requirements. The equipment is surplus to requirements and is available for inspection in Caerphilly, South Wales. The system includes a HI-LINE TUNDRA 300 REFRIGERATED AIR DRYER - Model: Tundra 300 - Year: 2018 - Maximum working pressure: 16 bar - 230V single-phase - Power: 1.73kW - Refrigerant: R407C - Serial No: 18M-014875 - Original operating manual included Hsdpfozzpttsx Akrenu The dryer has been installed alongside the Atlas Copco to provide a complete compressed-air solution. The equipment is surplus to requirements and is available for inspection in Caerphilly, South Wales. Available for inspection by appointment. Location: Caerphilly, South Wales Buyer to arrange collection/disconnection and transport. Further photographs and operating information available on request.

Condition: like new (used), Year of construction: 2021, operating hours: 57 h, functionality: fully functional, machine/vehicle number: V002117/16, overall weight: 450 kg, power: 7.5 kW (10.20 HP), fuel type: electric, volume flow: 66 m³/h, operating pressure: 10 bar, pressure (min.): 0.5 bar, pressure (max.): 10 bar, type of cooling: air, Equipment: documentation/manual, refrigerant dryer, Hertz HBD 7 screw compressor, 7.5 kW – 10 bar – 57 operating hours – including refrigerated dryer Description: Hertz HBD 7 screw compressor – in like-new condition – only 57 operating hours. For sale is a Hertz HBD 7 screw compressor system from 12/2021 with only 57 operating hours. The system has been operated very little and is in very good, like-new condition, both visually and technically. Technical data of the compressor: * Manufacturer: Hertz Kompressoren * Model: HBD 7 * Year of manufacture: 12/2021 * Operating hours: only 57 hours * Power: 7.5 kW * Max. pressure: 10 bar * Volume flow: 1.1 m³/min * Voltage: 400 V / 3 phases * Frequency: 50 Hz * Screw compressor, oil-cooled * Serial number: see nameplate Refrigerated dryer: Hjdjzt Srijpfx Akronu * Model: Dryair DK 40 * Year of manufacture: 12/2021 * Max. pressure: 16 bar * Power: 0.37 kW * 230 V / 50 Hz * Refrigerant: R134a The system is mounted on a compressed air tank and is ready for immediate use as a complete unit. The photos show the actual system being offered. Price: €6,900 net, negotiable plus statutory VAT. Inspection and test run possible by arrangement. Collection preferred. Loading can be arranged by agreement.

Condition: excellent (used), Year of construction: 2000, operating hours: 47,000 h, functionality: fully functional, machine/vehicle number: 1068, overall weight: 270 kg, power: 5.5 kW (7.48 HP), fuel type: electric, volume flow: 42 m³/h, pressure (max.): 10 bar, type of cooling: air, Equipment: type plate available, Kaeser Airtower 8 Screw Compressor (5.5 kW, 700 l/min) with Refrigeration Dryer /ct2499a/ Kaeser Airtower 8 screw compressor with refrigeration dryer for sale; serviced from new and in excellent condition. Manufacturer: Kaeser Airtower 8 + TU11 refrigeration dryer Serial number: 1068 Year of manufacture: 2000 Operating hours: 47,000 h Power: 5.5 kW Air delivery: 700 l/min (42 m³/h) Pressure: 10 bar Motor speed: 3000 rpm Rated voltage: 400 V, 3-phase, 50 Hz Rated current: 12 A Pipe connection: 3/4 inch Includes Kaeser automatic condensate drain and filter Overall dimensions: Length: 675 mm Width: 625 mm Height: 1285 mm Hodsz Er A Aopfx Akrenu Weight: 270 kg