Used Bomag Bw177D-4 for sale (58,227)

Condition: used, functionality: fully functional, power: 3.1 kW (4.21 HP), fuel type: diesel, color: yellow, overall weight: 205 kg, Year of construction: 2022, machine/vehicle number: 2476268, Bomag BPR 35/60 D Technical specifications: Year of manufacture: 2022 Dimensions (L x W x H): 1.51 m x 0.60 m x 0.69 m Weight: 205 kg Ground clearance: 0.68 m Max. working speed: 27 m/min Max. climbing ability (depending on ground conditions): 32% Engine manufacturer, type: Hatz 1B20 Bjdpfx Ahsy Uhpijmsln Cooling: Air-cooled Power: 3.1 kW Speed: 3000 rpm Drive type: Mechanical Fuel: Diesel Fuel tank capacity: 3.0 l Centrifugal force: 35 kN Vibration frequency: 80 Hz Output (m³/h) at recommended layer thicknesses for earthworks: Gravel/sand: 21-30 Mixed soil: 17-24 Cohesive soil: 10-12 Engine protection bar, single-lever control, height-adjustable guide handle, oscillating arm guide handle, automatic shut-off in case of low oil level, reversing safety device Guide handle can be locked in transport and working position.

Condition: used, Year of construction: 2022, operating hours: 260 h, Overall rating (1: poor, 5: like new): Very Good Bledjzkzznspfx Ahmen ---- UVV certified – ready for immediate use Approx. 260 operating hours – operating weight 2,400 kg – working width 1,000 mm – Kubota diesel engine Stage V / TIER4f – Four rubber wheels with smooth tread at the rear – Hydrostatic drive and vibration system – 2 scrapers per roller, spring-loaded and foldable – Pressure lubrication with intermittent operation – Multifunction joystick – Multifunction display including operating hour counter – Water level indicator – EMERGENCY STOP – Intelligent Vibration Control – Integrated storage compartment – Adjustable driver's seat – Seat contact switch – Vandalism protection – 12 V socket – Work lights front/rear – Reversing warning device – Lockable engine cover made of composite material – Tie-down eyes, galvanized – Single-point suspension

Condition: new, Year of construction: 2022, functionality: fully functional, type of input current: three-phase, power: 50 kW (67.98 HP), input voltage: 400 V, fuel: domestic gas H, overall weight: 2,200 kg, nominal power: 50 kW (67.98 HP), input frequency: 50 Hz, continuous power: 50 kW (67.98 HP), input current: 72 A, Equipment: documentation/manual, For sale: new and unused 2G g box 50plus combined heat and power (CHP) unit from 2022. Bjdpfx Ahsz Hngmemjln This is a 2G Energietechnik g box 50plus, configuration as70 4, suitable for simultaneous generation of electricity and heat using natural gas. The unit has never been put into operation and is in new condition. At full load, the CHP unit delivers 50 kW of electrical power and approximately 104 kW of thermal power. The unit is designed for 400 V and 50 Hz and is equipped with a Liebherr G924 natural gas engine and a Leroy Somer LSAH 44.3 generator. Technical specifications: • Manufacturer: 2G Energietechnik GmbH • Type: g box 50plus • Configuration: as70 4 • ID number: H1214 • Year of manufacture: 2022 • Electrical power: 50 kW • Thermal power: approximately 104 kW • Rated voltage: 400 V • Rated frequency: 50 Hz • Rated current: 72 A • Weight of CHP module: approximately 2,200 kg • Fuel: natural gas • Electrical efficiency: approximately 34.5 percent • Thermal efficiency: approximately 71.8 percent • NOx emissions: less than 125 mg per Nm³ • Sound pressure level of CHP: approximately 55 dB(A) at 1 meter The offered package consists not only of the CHP module. The installation also includes two Viessmann boiler bodies, one Viessmann Proflame VM IV 3 gas burner, a separate control cabinet, and various flue gas components, fittings, and related documentation. The original new price of the complete installation was approximately €189,000. The installation comes from a project for which it was ultimately not used. The various main components are from 2022 and have been stored without being put into operation. Due to the size and composition of the installation, we advise interested parties to contact us in advance for further technical information, photos, documentation, and an overview of the components available. An inspection is, of course, possible (location: Winterswijk, Netherlands). Loading onto the buyer's transport vehicle is possible on site.

Condition: used, Year of construction: 2020, operating hours: 3,120 h, Empty weight: 16.000 kg Dimensions (LxBxH): 622 x 230 x 299 cm Engine type: Deutz DEUTZ TCD4.1 L-4 Roller width: 2130 mm Bljdjygu Rvjpfx Ahmon = Additional options and accessories = - Seat heater

Condition: used, color: yellow, Year of construction: 2021, operating hours: 3,930 h, Year of manufacture: 2021 Empty weight: 16.000 kg Blsdpfsx Sqhiex Ahmsn Dimensions (LxBxH): 622 x 230 x 299 cm Engine type: Deutz DEUTZ TCD4.1 L-4

Condition: used, Year of construction: 2022, operating hours: 4,180 h, Empty weight: 16.000 kg Dimensions (LxBxH): 622 x 230 x 299 cm Blodjzi Eb Nopfx Ahmon Roller width: 2133 mm

Condition: used, Empty weight: 762 kg Bedpsz Dwq Ajfx Ahmsln Dimensions (LxBxH): 232 x 76 x 121 cm

Condition: used, Year of construction: 2011, operating hours: 3,725 h, 2011 | Bomag BW 332 DEEP Impact | Used Single Drum Roller | 3725 hours Bedpfx Ahsyux Eysmjln 📍Location: Germany 🚛 Delivery available to your destination – Use our shipping calculator to estimate transport costs! 💰 Buy Now for EUR 138500 or Make an Offer. Payment at delivery available for an affordable fee (subject to approval)* 👷‍♂️ Inspected by an independent expert 43 inspection points 30 approved ✅ 13 imperfect ℹ️ 0 issues ⚠️ 📌 Inspector's Comment: Fully functional, some service backlog. 📄 Want to see the full inspection, extra photos, or a video? Tip: The reference "38821 Equippo" is commonly used when looking up more details online. 💡 Why this machine and our service stands out: ✔ Thorough inspection by professionals ✔ Jobsite delivery available ✔ Money-Back Guaranteed ✔ Secure and flexible payment options 🔄 Considering other equipment options? We offer helpful tools and resources for all equipment owners and operators – easily accessible on our platform.

Condition: used, fuel tank capacity: 35 l, Year of construction: 2021, operating hours: 820 h, Empty weight: 2.700 kg Bedpfey Iz A Ajx Ahmjln Dimensions (LxBxH): 253 x 127 x 257 cm Roller width: 1200 mm

Condition: used, Year of construction: 2001, operating hours: 1,782 h, 2001 | Bomag BW 100 AC-3 | Used Combi Roller | 1782 hours 📍Location: France 🚛 Delivery available to your destination – Use our shipping calculator to estimate transport costs! 💰 Buy Now for EUR 6500 or Make an Offer. Payment at delivery available for an affordable fee (subject to approval)* 👷‍♂️ Inspected by an independent expert 41 inspection points 36 approved ✅ 5 imperfect ℹ️ 0 issues ⚠️ 📌 Inspector's Comment: The machine is mechanically sound and operational, but requires some minor repairs before being deployed in the field. The main functional issues are a broken water drain pump (irrigation system), a fuel hose leak, and leaks at hydraulic fittings. On the exterior, the scraping bars (drum scrapers) are missing, and some headlights are broken or removed. Overall, the main structure and transmission are in good condition, but the unit requires basic maintenance (plumbing, electrical, and scrapers) to be fully operational. 📄 Want to see the full inspection, extra photos, or a video? Bedpfx Ahezcp Sgomjln Tip: The reference "40723 Equippo" is commonly used when looking up more details online. 💡 Why this machine and our service stands out: ✔ Thorough inspection by professionals ✔ Jobsite delivery available ✔ Money-Back Guaranteed ✔ Secure and flexible payment options 🔄 Considering other equipment options? We offer helpful tools and resources for all equipment owners and operators – easily accessible on our platform.

Condition: used, Year of construction: 2008, machine/vehicle number: 0007-2008, 4 chambers with dry steam, glass doors, suitable for this Number available (price per tank): 1 Blodpfx Ahez Ibq Iemon electrical power supply kW: 5 Sleevetunnel chambers: 4 Strom / Volt: 400

Condition: used, Year of construction: 2017, operating hours: 1,800 h, No. 3131 CNC machining center FORMAT-4 profit H10 22.43 Used, year of construction 2017 Operating hours approx. 1800 h Package consisting of CNC machining center FORMAT-4 profit H10 22.43, feeding unit FORMAT-4 L-Motion and extraction unit FELDER RL 300 Technical data CNC machining center FORMAT-4 profit H10 22.43: Matrix table system made of phenolic resin Raster table with two stop rows Automatic central lubrication HARDWARE control computer Mobile control panel Handheld terminal for remote control of the axes Two vacuum pumps, rated output 2 x 250 m3/h Tool changer with 10 tools Tool changer on the left in the machine stand: 8 tool positions for HSK Milling spindle 12 kW (S6) HSK F63, 24000 rpm Central extraction via merged connections (D=250mm) Woodflash German software (H20/H08/H10/H50) Travel of axes H10 22.43: X= 5230 mm / Y= 2560 mm / Z= 280 mm Working field: X= 4300 mm / Y= 2160 mm / Z= 105 mm Axis positioning speed: X= 100 m/min / Y= 100 m/min / Z= 30 m/min Technical data feeding unit FORMAT-4 L-Motion: Year of construction 2017 In 2-axis version with 4 storage locations for feeding an H10 with lifting table Feeding the CNC Gentle transport Fully automatic panel handling Workpiece sizes: Length 2000-4200mm / width 600-2100mm / thickness from 8mm / panel weight 200kg Density: chipboard 650kg/m3 / MDF raw 750kg/m3 Stacking height 1800mm Technical data extraction unit FELDER RL 300: Year of construction 2023 Nominal volume flow 6000 m3/h, H3 GS dust-tested, JET cleaning Compressed air connection 3/4 inch Connection pressure 7 - 12 bar with 40NL/min Blodpfx Ajrrh T Aehmjn Operating pressure in the device 6 bar Chip container capacity 500 l Extinguishing device with powder extinguisher Dry fire extinguisher 12 kg Sale On behalf of customer, ex location Leipzig, without dismantling, without transportation and assembly Subject to errors in description and price Dismantling and loading by us optionally possible To avoid possible misunderstandings, an on-site inspection is possible and recommended by appointment Sold as is Technical details, condition description, year of construction and scope of delivery according to manufacturer's brochure or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded, the following applies: "purchased as inspected" Images and videos serve as examples and do not represent the actual scope of delivery Terms of payment: Prices plus VAT, payment before collection or dispatch Terms of delivery: ex location

Condition: used, Year of construction: 2020, operating hours: 3,410 h, Year of manufacture: 2020 Empty weight: 16.000 kg Dimensions (LxBxH): 622 x 230 x 299 cm Bljdpexqfdtofx Ahmjn Engine type: Deutz DEUTZ TCD4.1 L-4

Condition: good (used), functionality: fully functional, Description: Screw compressor ZR 4-51 1992 Characteristics: Capacity 8.60 bar Power 250 kW Voltage 500 V Blodpfx Ahjvyrnzomsn Running hours at last maintenance: 57957

Condition: ready for operation (used), Year of construction: 2016, functionality: fully functional, workpiece height (max.): 60 mm, roll diameter: 830 mm, On-site inspections while the machines are running are possible in Lithuania! Fully automatic edge banding line with the following machines: HOMAG PROFI KAL330/9/A3/WZ (year of manufacture 2013) HOMAG PROFI KAL370/8/A3/WZ (year of manufacture 2016) HOMAG PROFI TBL100/20/30/F infeed table (year of manufacture 2013) HOMAG POWER TWL410/25/LQ transfer system cross conveyor (year of manufacture 2016) TECHNICAL DETAILS HOMAG PROFI KAL330/9/A3/WZ & PROFI KAL370/8/A3/WZ edge banding machines Workpiece width without edge at a workpiece thickness of 12–22 mm: min. 60 mm (depending on the workpiece length) Workpiece width without edge at a workpiece thickness of 23–60 mm: min. 100 mm (depending on the workpiece length) Workpiece overhang: 30 mm Workpiece thickness: 12–60 mm Edge height: max. workpiece thickness + 4 mm Edge material on a roll: 0.3–3 mm Edge material height PVC: max. 135 mm Edge material height veneer: max. 100 mm Roll diameter: max. 830 mm HOMAG PROFI TBL100/20/30/F infeed table Roller diameter: 54 mm Roller spacing: approx. 60 mm Panel length: 240–2,500 mm Panel width: 120–3,000 mm HOMAG POWER TWL410/25/LQ transfer system cross conveyor Roller diameter: 64 mm Roller spacing: 110 mm Panel length: 240–2,500 mm Panel width: min. 240 mm Panel thickness: 8–60 mm Panel weight: max. 80 kg EQUIPMENT Clearance-type joining-cutting unit on both edge banding machines A3 basic gluing unit on both edge banding machines Clearance-type processing units on both edge banding machines FA11 finishing unit on the HOMAG PROFI KAL330 FA21 finishing unit on the HOMAG PROFI KAL370 Fixed stop on the left side of the infeed table Transport rollers on the infeed table Side conveyor belt on the infeed table Electropneumatically controlled cross guard on the infeed table Manually adjustable infeed guard Set of small parts Integrated air cushion table Fixed stop on the left side in the infeed and outfeed of the transfer system cross conveyor Bledpfxjz A Tx Ts Ahmon Infeed roller track with conveyor belt and cross transport Controlled cross conveyor in the infeed Outfeed roller track Controlled cross conveyor in the outfeed Electropneumatically controlled stop guard Side transport belt Manually adjustable panel overhang

Condition: excellent (used), Year of construction: 1999, functionality: fully functional, working width: 1,250 mm, pass-through height: 80 mm, UV System Venjakob - IST LIGNOCURE HL 140-4-N-DL POLYMERIZATION SYSTEM consisting of 2 UV dryers: Dryer 1 Overall length 2100 mm Overall width 2339 mm Workpiece dimensions min. 250 x 20 mm, max. 2500 x 1000 mm Workpiece height max. 60 mm 1 module with 2 elliptical reflectors (2 UV lamps) Electrode spacing of the IST lamps 140 mm Rotating reflectors Lamp rating per lamp 80 W/cm2 Beam length 1400 mm Lamp power 2 x 11.2 kW Air-cooled housing, capacity 1600 m³/h (motor 1.2 kW) Compressed air consumption 6 NL/h Belt conveyor Vanjakob, year of manufacture 1999, type Novo 40 Length 2100 mm Working width 1300 mm Working height 880 - 920 mm Feed drive 0.75 kW Feed speed 4 – 20 m/min (Line 2 - 4 m/min) Dryer 2 Overall length 3340 mm Overall width 2339 mm Workpiece dimensions min. 250 x 20 mm, max. 2500 x 1000 mm Workpiece height max. 60 mm 1 module with 2 elliptical reflectors (2 UV lamps) Electrode spacing of the IST lamps 140 mm Rotating reflectors Lamp rating per lamp 80 W/cm2 Beam length 1400 mm Lamp power 2 x 11.2 kW Air-cooled housing, capacity 1600 m³/h (motor 1.2 kW) Compressed air consumption 6 NL/h Belt conveyor Vanjakob, year of manufacture 1999, type Novo 40 Length 3340 mm Blsdpfx Ahjyalc Nomjn Working width 1300 mm Working height 880 - 920 mm Feed drive 0.75 kW Feed speed 4 – 20 m/min (Line 2 - 4 m/min) Common control cabinet for two drying tunnels 2000 x 1600 x 600 mm Operating voltage 400 V, AC, 50 Hz, 3 phases Total power of the complete UV system approx. 50 kW Operating side of the system is on the left Weight of the complete system approx. 2500 kg (Subject to changes and errors in technical data, as well as prior sale)

Condition: used, Year of construction: 2020, Sled length: 3200 mm Cutting width at the rip fence: 1250 mm Cutting width at the crosscut fence: 3200 mm Cutting depth: 120 mm Scoring saw: yes Saw blade height adjustment: handwheel Saw blade swivel adjustment: handwheel Rip fence adjustment: manual Crosscut fence adjustment: manual Saw blade angle indicator: scale Cutting height indicator: - Rip fence indicator: scale Crosscut fence indicator: scale Saw blade diameter: 400 mm Speeds: 3 Motor power: 5.5 kW Dust extraction port: 80 and 120 mm Machine length: 3200 mm Machine width: 2200 mm Blodpfx Ahszq Dcuemon Weight: 800 kg

Condition: new, functionality: fully functional, power: 2.8 kW (3.81 HP), fuel type: gasoline, color: yellow, operation weight: 58 kg, Year of construction: 2026, Equipment: UVV, Bomag BT 60 Tamper – NEW Bomag BT 60 Tamper – NEW | 15 kN impact force | 23 cm footplate | Honda GXR 120 gasoline engine | Operating hour and RPM counter Item number: 54100071 Technical data: Manufacturer: Bomag Model: BT 60 Condition: NEW Operating weight: 58 kg Impact force: 15 kN Footplate width: 23 cm Engine: Honda GXR 120 gasoline engine Engine power: 2.8 kW Fuel: Gasoline Starting system: Reversible start Highlights & Features: - Compact tamper for precise compaction work - Robust design – ideal for daily use on construction sites - 23 cm footplate – optimal for narrow trenches & edge areas - Honda gasoline engine – reliable & easy to maintain - Integrated operating hour and RPM counter - Made by Bomag – proven quality & immediately available Application areas: ✓ Pipeline & sewer construction Bledpfxszrdbye Ahmon ✓ Fiber optic & cable laying ✓ Garden & landscaping ✓ Municipal applications & construction companies ✓ Compaction work in confined areas & trenches Location: Warehouse D-46514 Schermbeck (North Rhine-Westphalia) – Inspection & collection possible Delivery throughout Germany & internationally on request Pricing ex warehouse Maassenstraße 91, D-46514 Schermbeck (Wesel district) All information without guarantee. Errors and prior sale excepted. Prices plus VAT Other models available! Also available with 16 cm, 20 cm & 28 cm footplates ➡️ New & used machines, accessories & spare parts Buy Bomag tamper | BT 60 NEW | Gasoline tamper 15 kN | Compaction equipment with Honda engine | 23 cm footplate | Bomag compaction technology | Tamper for sewer construction & trench compaction Your reliable partner for compaction technology & construction machinery: Claudio Macagnino Baumaschinen & Nutzfahrzeughandel GmbH ➡️ Request now & secure immediately available new goods! If required, we will gladly arrange a virtual inspection of the machine via video call.

Condition: used, Year of construction: 2022, operating hours: 466 h, 2022 | Bomag BMP 8500 Trench Compactor - Grabenwalze | Used Other Roller | 466 hours 📍Location: Germany 🚛 Delivery available to your destination – Use our shipping calculator to estimate transport costs! 💰 Buy Now for EUR 13900 or Make an Offer. Payment at delivery available for an affordable fee (subject to approval)* 👷‍♂️ Inspected by an independent expert 27 inspection points 27 approved ✅ 0 imperfect ℹ️ 0 issues ⚠️ 📌 Inspector's Comment: No flaws detected 📄 Want to see the full inspection, extra photos, or a video? Tip: The reference "40835 Equippo" is commonly used when looking up more details online. 💡 Why this machine and our service stands out: ✔ Thorough inspection by professionals ✔ Jobsite delivery available Blsdpfxey Sa Hns Ahmon ✔ Money-Back Guaranteed ✔ Secure and flexible payment options 🔄 Considering other equipment options? We offer helpful tools and resources for all equipment owners and operators – easily accessible on our platform.

Condition: used, functionality: fully functional, Used pallet racking from SSI Schäfer is among the most popular solutions for efficient and safe warehouse storage. This heavy-duty racking system is ideal for warehouses, industrial companies, and logistics operations that require robust and durable racking for storing Euro pallets. The proven PR600 design offers high load-bearing capacity, maximum flexibility, and is perfectly suited for storing heavy goods. Buying used here means: certified brand quality at a particularly attractive price – immediately available for new installations, retrofitting, or expanding your existing racking system. Customizable: The racking frames (Type P120) can be rebuilt to your desired height – professionally and precisely in our workshop. We provide made-to-measure racking solutions for every warehouse requirement. PRODUCT DETAILS - Height: approx. 9.85 m - Depth: approx. 105 cm - Length: approx. 10,100 cm - Shelf load: 3,000 / 3,500 kg (depending on version) - Bay width: 270 cm (3 × EPAL) - Beams: 270 cm, Type INP100 or CE110 (box profile) - Beam colour: Blue - Frame type: P120, galvanized, pre-assembled - Levels: Floor + 4 Bledpfjz H I Scsx Ahmjn - Pallet spaces: 540 incl. floor spaces - Version: Used SSI Schäfer PR600 - Availability: Immediately available from stock, multiple sets in stock SCOPE OF DELIVERY: - 037 × frames approx. 9.85 × 1.05 m, galvanized, pre-assembled - 288 × beams approx. 270 cm (INP100 or CE110) - 576 × safety pins Price: €11,844.00 net €14,094.36 gross You will receive an invoice with VAT shown separately. DELIVERY, INSTALLATION & INSPECTION: - Nationwide delivery across Germany via our partner shipping company – freight costs depend on postal code - Professional installation and dismantling by trained teams is optionally available - Racking inspections according to DIN EN 15635 by certified inspectors - Inspection of existing heavy-duty racks from other manufacturers also possible PLANNING & CONSULTATION: Our planning department will gladly prepare a non-binding quote tailored to your requirements. Whether new build, modification, or extension – we provide competent advice for your racking configuration. SHOWROOM: Visit us in our showroom! On site, you can get a comprehensive impression of our pallet racking, shelving, and other solutions. Many systems are assembled and ready to view. Our specialist advisors are available for questions and individual advice – we look forward to your visit! Haven’t found the right solution yet? Visit our website for a quick overview of many offers and product variations! INTERESTED OR HAVE QUESTIONS? Simply contact us by message or phone. You’ll find our phone number on our company page. ☎️ We are available by phone Monday to Friday, 08:00 - 16:00. Alternatively, send us a message with your name and number and we will get back to you as soon as possible.

Condition: used, Year of construction: 1978, x-travel 1000 mm Blsdpezmir Tefx Ahmjn y-travel 900 mm z-axis 800 mm W-axis (spindle longitudinal) 500 mm spindle diameter 90 mm table surface area 1.000 x 1.000 mm table load 2,5 t spindle turning speed range 8- 1600 U/min power capacity - milling spindle 11 kW tool taper SK 40 | control Heidenhain TNC 407 dimensions 4,5 x 3,25 x 3,0 m weight of the machine ca. 8 t used table borer. retrofitted to CNC Heidenhain TNC 407 - some tool holders - turntable with motor - coolant system

Condition: used, Year of construction: 2020, Used machine Year of manufacture: 2020 Circular saw unit, 0° - 46° swivel, maintenance-free, Saw blade diameter: 250-550 mm Maximum cutting height: 200 mm Saw blade spindle: 30 mm Undertable extraction: 120 mm Parallel fence with fine adjustment Blodpfjz Dyfcex Ahmjn Fence ruler length: 1200 mm, can be swiveled Extension table: 1250 x 650 mm Cutting length: 2800/3200 mm Crosscut fence: 3200 mm, can be swiveled 90-45°, 2 fence jaws Kappa 550 control with programmable angle and height positioning, automatic cutting height correction during swiveling. 3-line LED display for height, angle and speed SD Circular saw table extension up to 1620 mm behind the saw axis, aluminum anodized On/off switch on the sliding table Panel saw sliding table: 3200 mm, anodized Swiveling mechanism for extension table Cutting width: 1250 mm Upper guard cutting width: 1250 mm Extraction connection: 100 mm Electrical system: Kappa 550, 3x400V 50Hz CE, 10 kW S6 with star-delta starter 3 speeds: 3000/4000/5000 rpm Quick overview Location: Flörsheim Availability: short notice

Condition: used, mileage: 413,308 km, power: 80 kW (108.77 HP), first registration: 01/2010, fuel type: diesel, next inspection (TÜV): 06/2028, color: white, gearing type: mechanical, emission class: euro4, number of seats: 9, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), immobilizer system, soot filter, * €4,900 * Volkswagen Crafter 2.5 Tdi L2H2, 9 seats, wheelchair lift, air conditioning, Euro 4 * Seats (1+8) * 6-speed transmission * Radio/CD player * Driver airbag * USB port * Electric windows * Electric mirrors * Central locking * Air conditioning * ABS * ESP * 4 wheelchair spaces * Wheelchair lift, 400 kg capacity * Wheelbase 367 cm * Unladen weight 2443 kg * Payload 1057 kg * Permissible total weight 3500 kg * Passenger car registration * Vehicle no. 34 ???? NEW TIMING BELT FITTED AT 405,000 KM, VALID UNTIL 11-2025 ???? OPENING HOURS Monday - Friday, 09:00 - 17:00 (by appointment...) CONTACT DETAILS Telephone: WhatsApp E-mail: Transit and customs license plates (export number) available. Errors, typos and prior sale are subject to change. Technical specifications and equipment features must be checked separately. The condition of the vehicle is as agreed upon in the contract and is only valid if inspected and confirmed in writing at the time of purchase. Please arrange an appointment... Bodezci N Ejpfx Ahmjln

Condition: used, axle configuration: > 3 axles, first registration: 11/2006, loading space length: 13,500 mm, loading space width: 2,500 mm, loading space height: 2,240 mm, total length: 13,600 mm, total width: 2,550 mm, total height: 4,000 mm, suspension: air, Year of construction: 2006, Meusburger MPG-4 4-axle sliding tarp semi-trailer Year of manufacture: 2006 First registration: 11-12-2006 Chassis number: W09PG400760M49844 Equipment: 4 axles 1st axle liftable Last 2 axles steered Sliding tarpaulin Sliding roof Support legs Lashing eyes in the loading area Ramp at the rear 2 spare wheels German registration Dimensions: Fifth wheel height: 1.17 m Loading area height: 0.76 m Loading area length: 9.50 m Kingpin length: 4.00 m Internal width: 2.50 m Internal height: 3.24 m Weights: Technical total weight: 47,600 kg Axle loads: 4 x 7,400 kg Permissible fifth wheel load: 18,000 kg The semi-trailer was used in combination with a MAN TGX 26.480 6x2 tractor unit from 2015 with approximately 511,000 km. This tractor unit is also available. Sale as a complete combination is possible. Contact: Haverhoek Trucks B.V. Zweedsestraat 6 7418 BG Deventer Netherlands Tel. E-mail: Website: = Further information = Suspension: Air suspension Front axle: Lift axle; Axle brand: BPW; Tire tread left: 80%; Tire tread right: 80% Middle axle 1: Tire tread left: 75%; Tire tread right: 75% Bodpfx Aoz H Tkwjhmsln Middle axle 2: Steered; Tire tread left: 75%; Tire tread right: 75% Rear axle: Steered; Tire tread left: 75%; Tire tread right: 75% Unladen weight: 9,800 kg Payload: 37,800 kg GVWR: 47,600 kg

Condition: new, power: 140 kW (190.35 HP), fuel type: diesel, color: black, gearing type: automatic, number of seats: 23, Year of construction: 2026, Equipment: ABS, air conditioning, electronic stability program (ESP), parking heater, New vehicle, in stock. Sunset S 3 Ferqui built on a Sprinter 519 chassis plastic/fiberglass body Length: 7923 mm Bodpfxjz Ii Dpj Ahmsln Width: 2226 mm (21 cm wider than the van) Height: 2900 mm - 22 reclining seats + driver - Overhead ventilation ducts on the left and right / reading lamps, USB ports - Webasto/Diavia Madrid 14.5 kW air conditioning - Extra-large double glazing - Large panoramic windshield - Convector heaters on the left and right - Large rear luggage compartment - Side luggage compartments - Bus-style rear Price: 149,990.00 EUR net. We ship worldwide. Net export possible.