Used Cfs K&G Cutmaster Vsm750 for sale (57,592)

Condition: used, Year of construction: 2014, Main spindle power: 13.2 kW Drilling unit motor power: 7 kW Hjdpfx Acezuwxdehenr 3-axis machine Drilling unit: Technical data - Nut saw - 2 horizontal drilling spindles in the X-axis (left/right) - 1 horizontal drilling spindle in the Y-axis (left/right) - 10 vertical drilling spindles

Condition: used, Year of construction: 1986, year of last overhaul: 2004, CLEARANCE SALE Hodpfxey A S The Achsnr WILL BE SOLD TO HIGHEST BIDDER ON 'FIRST COME - FIRST SERVE BASIS' ; IMMEDIATE SHIPPING POSSIBLE LIST OF OTHER MACHINES FROM SAME MILL AVAILBLE UPON REQUEST TEXTILE FABRIC STENTER – MONTFORTS MONTEX 12 G/K For sale: Montforts Montex 12 G/K textile fabric stenter line, well-equipped and suitable for drying, finishing, coating, and fabric straightening applications. Machine details Make: Montforts Model: Montex 12 G/K Year of manufacture: 1986 Major overhaul: 2004, including replacement with economical type burners. After few years was preserved and stored. Refurbished: 2008, then preserved Working width: 220 cm Drying chambers: 6 Heating: Liquid gas and natural gas Fabric conveying system: Horizontal chain, pin and clip Accessories and additional equipment Küsters foulard Isotex coating unit, model SR Mahlo straightener, model RFMC-74 AN Selvage cutting units 2 cooling cylinders Chemical station with tanks: 1300 L, 1100 L, 2 x 500 L All tanks fitted with mixers Heat recovery system installed above the drying compartments MACHINE IS REFURBISHED , PROFESSIONALLY MARKED, DISMANTLED, STORED IN MILL-FLOOR - VIDEO AVAILABLE For more information, technical details, photos, or video , please get in touch. Shipping possible immediately.

Condition: used, machine/vehicle number: 008441, Max. panel width: 1100 mm Hnedpfxoyz Slbj Achjr Max. panel length: 5700 mm Max forward speed: 30 mt/min Number of shafts: 1 Motor Power: 90 KW

Condition: used, maximum load weight: 1,115 kg, overall weight: 1,500 kg, axle configuration: 1 axle, first registration: 03/2026, loading space length: 3,010 mm, loading space width: 1,670 mm, loading space height: 161 mm, total width: 2,200 mm, total height: 1,185 mm, * Universal transporter by Pongratz, type L-PAT 300/16 G-K, vehicle transporter, gross weight: 1,500 kg, with loading ramp, low loader, overrun brake, and much more. Errors and prior sale excepted. Hnjdpfxjyn Ugge Achsr

Condition: used, maximum load weight: 13,440 kg, overall weight: 18,000 kg, axle configuration: 2 axles, first registration: 03/2013, loading space length: 7,350 mm, loading space width: 2,440 mm, loading space height: 2,440 mm, Equipment: ABS, tail-lift, Manufacturer: K+G Tec GmbH Type: ZPA18 Hnodpfxsv Ndnro Achor Safe server tarpaulin with Edscha roof and tail lift, 2,000 kg, air suspension with a lift axle, Mercedes axles, disc brakes, ABS. Internal dimensions: Length: 7.35 meters Width: 2.44 meters Height: 2.44 meters Payload: 13,440 kg

Condition: used, maximum load weight: 13,440 kg, overall weight: 18,000 kg, axle configuration: 2 axles, first registration: 03/2013, loading space length: 7,350 mm, loading space width: 2,440 mm, loading space height: 2,440 mm, Equipment: ABS, tail-lift, Manufacturer: K+G Tec GmbH Type: ZPA18 Safe server tarpaulin with Edscha roof and tail lift, 2,000 kg, air suspension with a lift axle, Mercedes axles, disc brakes, ABS. Internal dimensions: Hnedpfev Ndnxox Achjr Length: 7.35 meters Width: 2.44 meters Height: 2.44 meters Payload: 13,440 kg

Condition: good (used), axle configuration: 2 axles, first registration: 12/2015, loading space length: 7,300 mm, loading space width: 2,480 mm, loading space height: 2,300 mm, total length: 9,810 mm, total width: 2,550 mm, total height: 3,800 mm, suspension: air, tire size: 385/65R22,5, color: other, Year of construction: 2015, Equipment: ABS, tail-lift, = Additional Options and Accessories = - EBS - Tail lift = Notes = Number of axles: 2, Tare weight: 5560 kg, Gross vehicle weight: 18000 kg, Chassis type: Full chassis, ABS, EBS, Axle type: BPW, Tail lift, Tail lift design: Rear door, Load capacity of the tail lift: 2000 kg, Tail lift manufacturer: Bar cargolift, Tail lift material: Aluminum, Tail lift size: 230x252, Battery for loading ramp, TAILLIFT // LOADING PLATFORM // BEVERAGES = Additional Information = Hedeymwvuopfx Achonr General Information Cab: Day cab License plate: KLEYN1 Drivetrain Fuel type: Diesel Transmission Transmission: Manual transmission Axle Configuration Tire size: 385/65R22.5 Brakes: Disc brakes Suspension: Air suspension Axle 1: Tire tread depth left: 7 mm; Tire tread depth right: 8 mm Axle 2: Tire tread depth left: 11 mm; Tire tread depth right: 11 mm Weights Tare weight: 5,560 kg Payload: 12,440 kg GVW: 18,000 kg Functional Tail lift: Bar cargolift, Rear door, 2000 kg Height of the loading platform: 128 cm Environmental Emission class: Euro 0 Condition Technical condition: good Optical condition: good Damage: Damaged vehicle (not roadworthy) = Company Information = Kleyn Trucks is one of the largest independent used vehicle dealerships in the world. Here, you can choose from a constantly changing stock of 1200 used trucks, tractor units, and trailers. Our range includes all European brands from various years of manufacture and price ranges. Why buy from Kleyn Trucks? It’s simple! • Large, rapidly changing stock • Recognizable quality • A good price • Proper business practices • We speak many languages • We understand our customers • Support for import and transport • (Export) registration is quickly arranged • Expert technical services • The security of "recognizable quality" • And more... Please visit our website for special offers and a complete inventory: Leasing through Kleyn Trucks is possible in most European countries! Quickly calculate your lease rate and submit a request via our website. Ask directly about our European warranty package.

Year of construction: 1993, condition: used, - working width (mm): 2200 - engine power (kW): 22 - top rollers: with PU rings - bottom rollers: knurled Hsden I Twyjpfx Achsnr - Saw shaft: included

Condition: good (used), Packaging and Labeling Line – ILPRA + Bizerba Comprising: Packaging machine Brand: ILPRA Series: FOODPACK Model: BIG MEC Hjdpfsw Ht Uzex Achonr Number: FP 4698 Year of production: 2002 Voltage: 400 V Tray dimensions: 22x17 mm Sealing machine Brand: ILPRA Series: FP BIG MEC K/G Model: STAMPO Number: S 6036 Year of production: 2002 Voltage: 230 V Bizerba labeler

Condition: used, net belt width ± 600 mm total electrical power 33 kW thermal connection: NW32 2x5 tiers Hedpfx Aezudt Ijchonr product height: ± 100 mm cooking time min/max : 4-40 min max. temperature: 200°C automatic elevator with belt wash system suitable for CIP-cleaning suitable for steam injection (heating and product yield): 4-8 bar, connection: NW 40 turning to the left

Condition: used, Year of construction: 2003, operating hours: 4,935 h, Equipment: all wheel drive, * hydr Schnellwechsel * Standart Schaufe * 3. Steuerkreis * Arbeitsbeleuchtung * Straßenbeleuchtung * 4 Zylinder Perkins 700 Motor * 1 Hebelbedieung * 5800 kg GG * Heizung * Breit- Reifen 20 Zoll 90-60% * Perkins 700 Serie 4 Zyinder Motor * deutsches Fahrzeug Hnodpfx Aomcxguechsr * 1. Hand * Betriebserlaubnis * Declaration of Conformity * Netto-Verkauf innerhalb der EU wird nur noch mit MWST Kaution und dem Nachweis der Zulassung im Bestimmungsland (Gelangensbestätigung) durchgeführt Verkauf nur an Gewerbe Dieses Angebot ist unverbindlich und freibleibend. Irrtum und Zwischenverkauf vorbehalten. · Keine Gewähr auf Eingabefehler. Transport zum Hafen möglich Besichtigungen nur nach Vereinbarung WhatsApp

Condition: ready for operation (used), Year of construction: 2013, A complete Weber slicing and packaging line is available. 1) Weber Type 904 slicer, cutting system: crescent blade, speed: 2000rpm, slice thickness range: 0.5mm-100mm. 2) CFS PowerPak 560 horizontal thermoforming packaging machine, year of manufacture: 2011, retrofit: 2013, film web width: 560mm, max. feed length: 650mm, max. forming depth: 130mm. 3) 2x CFS TL 150 cross-web labeling machines, year of manufacture: 2011, max. label width: 150mm, max. labeling capacity: 200/min. 4) Loma EMC in-line metal detector, year of manufacture: 2013. This is a complete slicing and packaging line with peripheral equipment. Documentation available. An on-site inspection is possible. Hodpfx Aozli T Iechsnr

Condition: new, Bee GTE-88/090/-08-V17-F pneumatic ball valve, 24V DC coil voltage, unused, 100% functional, scope of delivery as shown in the photos. Hnsdji D T Iyjpfx Acher

Condition: good (used), Year of construction: 2011, Frozen meat block grinder – CFS Autogrind 280 Manufacturer: CFS Slagelse A/S, Denmark Model: Autogrind 280 Serial number: 5000068108 POS.03 Hnedpfow Hlquox Achor Year of manufacture: 2011 Power supply: 3 × 400 V, 50 Hz Power: 117 kW Current consumption: 225.5 A Maximum safe working load: 35 kg

Condition: used, Year of construction: 1990, Equipment: all wheel drive, * O&K crawler excavator * Year of manufacture 1990 Hnedpfx Acjwpptlehjr * Window defect * Needs repair * Work lights * Bucket ----Internal vehicle number: 10119-----Subject to errors and prior sale

Year of construction: 2005, condition: good (used), machine/vehicle number: 815 1015 1794, Manufacturer: CFS Germany GmbH Type: JuniorPak M420 Hodpfx Ajzka Rujchenr Year of manufacture: 2005 Voltage: 400 V Phases: 3-phase + N + PE Current: 29 A Power: 20 kW Frequency: 50 Hz Weight: 2200 kg This is a thermoforming machine (deep-draw machine) for the production of vacuum-packed or MAP-packed food. It is designed for medium-sized production lines and is often used for meat, cold cuts, cheese, fish, and ready meals. How the JuniorPak M420 works 1. Bottom film feeding A roll of plastic film is mounted at the rear of the machine. The film is drawn forward using conveyor chains with grippers. Common materials: APET/PE PA/PE PP PET barrier film 2. Heating The bottom film enters the heating zone. Here, the plastic is heated to approximately: 90–140 °C, depending on the material type. The temperature is controlled by electric heating plates. 3. Deep drawing This is the machine's most important process. The mold closes. Then, usually: vacuum is applied under the film compressed air is applied above the film, if required the film is drawn down into the mold The result is finished plastic containers or trays. The forming depth is determined by the mold. 4. Filling zone After forming, the process stops. Operators or automatic equipment place the product in the trays. Examples: meat burgers bacon cheese fish 5. Top film A new film is fed in from above. This lies over the product. 6. Vacuum/MAP The sealing chamber closes. The machine can: create a vacuum flush with gas seal directly In MAP, the following are often used: CO₂ N₂ O₂ The gas mixture depends on the product. 7. Sealing The top film is sealed to the bottom film. Sealing occurs with: temperature pressure time These three parameters are crucial for a tight seal. 8. Cutting The cutting tool cuts each individual package. Excess film is transported out as scrap. 9. Ejection Finished packages are transported out onto a conveyor belt. They can then: be labeled be weighed be checked with a metal detector be packed in boxes A JuniorPak M420 normally consists of: Frame made of stainless steel Film transport with chains Heating station Forming station Filling zone Vacuum/MAP chamber Sealing tool Cutting tool Ejection conveyor Vacuum pump Pneumatic system Hydraulics (on some models) PLC control with HMI Typical technical data For the M420 series, typical values are: Maximum film width: approx. 420 mm Forming depth: up to approx. 100–120 mm, depending on the tool Cycle time: 5–15 cycles/min Capacity: from a few hundred to several thousand packages/hour, depending on the product and tool Connection: 400 V 3-phase Power: 20 kW (as shown on the nameplate)

Condition: ready for operation (used), Manufacturer: H&G Model: HG/SV 11 Weight: 1800 kg Engine power: 11 kW Hnsdezp Ilqepfx Achsr

Condition: used, continuous grilling line all stainless steel with lower and upper belt : bottom and top heating temperature of the belts is separately adjustable nett length 1800 mm belt width 600 mm electrically heated 93 kW Hnsdpfxjzktzaj Acher belt washing system temperature from 50 up to 260°C grilling time 0,3 – 3 m/min adjustable speed dimensions (l x w x h) : ± 3.400 x 1.800 x 2.000 mm

Condition: excellent (used), Year of construction: 2004, Used CFS FRESHGRIND 200 grinder for sale. Equipped with a loading device. Please let me know if you are interested. Hedpjzmwk Rsfx Achenr

Condition: used, all stainless steel 3 tiers nett belt length ± 5.800 mm nett belt width ± 940 mm stainless steel mesh wire belt outside dimensions (l x w x h) : ± 7.200 x 1.400 x 2.900 mm + Evaporator "Goedhart B.V." Type LLK.s 411m² manufacturing number: PJV100282 Year of manufacture: 2010 Capacity: 135 dm³ Refrigerant: NH3 Hedpozkg I Hsfx Achenr Weight: 770 kg, Working pressure: 22 bar Test pressure: 32 bar Overall dimensions including cooling panels and stainless steel door: 7.500 x 2.700 x 3.300 mm

Condition: used, all stainless steel with top hold down belt water circulation net belt length 8.000 mm net belt width 900 mm adjustable speed lifting unit with electrical hoists dimensions (l x w x h): ± 9.000 x 1.800 x 3.850 mm Hedpfx Ajzkabmschenr

Condition: used, all stainless steel belt width 1.000 mm adjustable speed 0,75 kW dimensions (l x w x h) : ± 1.750 x 1.300 x 1.350 mm Hedpfx Acszi Sd Rehonr

Condition: used, Year of construction: 2002, power: 90 kW (122.37 HP), The CFS ChunkMaster 400 industrial grinder is a heavy-duty machine designed for meat processing plants that require exceptional performance, consistent raw material particle size, and the highest quality finished product. The machine is based on the proven Wolfking/CFS grinding platform, later continued as part of the GEA product portfolio, which is why the ChunkMaster 400 enjoys an excellent reputation in the industry for its reliability, durability, and low maintenance costs. Technical Specifications of the CFS ChunkMaster 400 Meat Grinder Manufacturer: CFS Model: ChunkMaster 400 Equipment type: Industrial meat grinder Year of manufacture: 2002 Grinding system diameter: Ø400 mm Hnodpfxjzmgqto Achsr Power supply: 400 V, 3-phase, 50 Hz Current draw: 162 A Power: 90 kW Dimensions: What is the CFS ChunkMaster 400 meat grinder used for? The ChunkMaster 400 is designed for grinding a wide range of meat raw materials: beef, pork, poultry, fat, and trimmings, as well as fresh, chilled, and slightly tempered meat. The machine is well-suited as part of a raw material preparation line for the production of sausages, ground meat mixtures, burgers, pet food, and convenience products. The large feed hopper, with a diameter of Ø400 mm, allows for the processing of significant quantities of raw material while ensuring gentle handling of the product and minimal temperature increase during grinding—which directly impacts the quality and shelf life of the finished product. Design and Cutting System The ChunkMaster 400 grinder is equipped with a robust stainless steel frame, a durable feed auger, and an industrial gearbox designed for continuous operation in large meat processing plants. The raw material feeding system ensures a smooth and uniform product flow, minimizing compression—thereby preserving the natural structure of the muscle tissue and resulting in a higher-quality final product. The machine can be configured with various Unger cutting sets, allowing for raw material particle sizes ranging from coarse pre-grinding to fine grinding, depending on the blades and screens used. Key advantages of the CFS ChunkMaster 400 grinder Large grinding system with a diameter of Ø400 mm, Exceptionally high production capacity, Gentle handling of raw materials, Minimal temperature increase during grinding, Excellent preservation of meat particle structure, Industrial-grade, heavy-duty gearbox and hygienic stainless steel construction, facilitating access for cleaning and maintenance, Easy access to replacement parts; screens, cutting blades, and drive belt included One of the greatest advantages of the ChunkMaster 400 grinder is the continued availability of replacement parts. Many mechanical components remain compatible with later CFS MaxiGrind and GEA MaxiGrind series, and independent manufacturers continue to offer OEM replacements—which significantly facilitates the long-term operation and servicing of this machine.

Condition: used, Year of construction: 1994, Manufacturer: CFS Model: CookStar CKH400/8/130 Year: 1994 Condition: Used Serial Number: 138 Stock Number: 3341G Belt width: 400 mm Tiers: 2 x 4 pc. Belt length: 44 m Product gap: 130 mm Retention time: 2.5 - 75 min Temperature: max 200°C Heating: thermal oil, 300kW Exhaust: 2 x 2000 m³/h Steam: NW40, 4 - 8 Bar Compressed air: 6 - 8 Bar Power: 3 x 400V, 50Hz, 35kW Dimensions: 8250 x 3150 x 4250 mm Hedpey R Tiaofx Achenr Weight: 12000 kg

Condition: used, Year of construction: 2010, Type: PowerGrind280 Serial number: 5000067561 Year of construction: 2010 Hjdpfxoyn Ntbj Achenr Hole plate diameter: 280 mm Capacity: 5.5 - 8.5 t/h frozen blocks Hopper: 600 litres Power: 3 x 400V, 50Hz, 160kW Dimensions: 3250 x 1650 x 2450 mm Weight: 5000 kg Including trolley for removing breaking worm and trolley for screw, plates and knives