Used Cip Pumpe Mit Dosierung for sale (16,155)

Condition: new, Grundfos CRN3-19 A-P-G-V-HQQV / A96516928P11017 vertical centrifugal pump, serial number: 0001, with MG90SB2-24FT115-D1 motor, serial number: 85D05906, unused, 100% functional, scope of delivery as shown in the photos. Ijdpfx Aezknyqog Astn

Condition: new, Grundfos CRN3-19 A-P-G-V-HQQV vertical centrifugal pump, serial number: 0001, with MG90SB2-24FT115-H3 motor / 85U05906, unused with signs of storage, 100% functional, scope of delivery as shown in the photos. Ijdpfx Agozkxg Is Aetn

Condition: ready for operation (used), Brinkmann SFL1150/330-CM3+1841 pump with motor SN:1116020423 - 41314/2-IP 55F, used, good condition, 100% functional, scope of delivery as per photos ATTENTION: Please enquire for charges for packing and transport separately! ATTENTION: Please enquire for charges for packing and transport separately! Itodpfx Ajt Sbmgjg Aon

Condition: new, Grundfos CRN3-19 A-P-G-V-HUBV / A96448517P10214 vertical centrifugal pump with MG 90SA2-24FT115-C2 motor, serial number: 85805906, unused, 100% functional, scope of delivery as shown in the photos. Itedpfx Aezknywog Ajn

Condition: new, Grundfos CRN3-19 A-P-G-V-HUBV pump with motor, unused but with signs of storage, 100% functional, scope of delivery as shown in the photos. Itsdpezkxhfefx Ag Asn

Condition: new, maximum load weight: 2,130 kg, overall weight: 3,000 kg, axle configuration: 2 axles, loading space length: 3,140 mm, loading space width: 1,750 mm, loading space height: 350 mm, total length: 4,500 mm, total width: 1,930 mm, total height: 1,260 mm, Year of construction: 2026, Humbaur three-way tipper with electric pump and steel grating extension – HTK 3000.31 Description: The HTK three-way tipper not only impresses with our usual high quality standards. It is equipped with a practical hand pump, which can be easily replaced with an electric hydraulic pump if needed. An electric pump is installed in the trailer. This turns the unloading of your cargo into a simple task! Technical data: * Trailer type – Twin-axle * Construction type – Aluminum * Rear tipping – 45° * Three-way tipping – 45° * Weight – 870 kg * Gross vehicle weight – 3000 kg * Payload – 2130 kg Itedpfxsz Dqgws Ag Aen * Internal length – 3,140 mm * Overall length – 4,500 mm * Internal width – 1,750 mm * Overall width – 1,930 mm * Internal height – 350 mm + steel grating extension 60 cm * Overall height – 1,260 mm + steel grating extension 60 cm * Loading height – 745 mm * Tires – 13 inches Standard equipment: V-drawbar, hot-dip galvanized * Chassis and tipping platform, hot-dip galvanized * Tipping platform made of steel, manufactured in one piece * Humbaur multi-function lighting * Side panels made of anodized aluminum, completely removable * Rear flap, hinged * Tie-down rings mounted in the platform floor, tensile force 800 kg per tie-down ring * Support wheel * Plank slot as preparation for aluminum planks for easy retrofitting Individual configurations as well as numerous accessory and equipment options such as grating or steel sheet extensions, tarpaulins, supports, ramps, etc. are available on request. Also available with a gross vehicle weight of 3000 kg and 3500 kg.

Condition: new, Knoll TG50-42/55480 centrifugal pump, 200523114, serial number: 268828, with AM 112M BA2 motor, serial number: 424615, unused, 100% functional. Scope of delivery as shown in the photos. ATTENTION: Please request separate quotes for packaging and shipping costs! Iodpfxozh Scqe Ag Aotn

Condition: new, Knoll TG50-42/55480 pump, serial number 200921578, SN: 413462, with AM 112M BA2 engine, serial number: 644637, used, in good condition, 100% functional. Scope of delivery as shown in the photos. PLEASE NOTE: Please request separate quotes for packaging and shipping costs! Iodpfx Agozh Scws Aetn

Condition: excellent (used), Viessmann Vitoplex/105kw low-temperature boiler with oil burner Itjdpfx Agowauaxj Asn

Condition: excellent (used), Buderus GE615 /820Kw boiler with Weishaupt burner Itsdpfx Agsq Am Ivo Asn

Condition: new, maximum load weight: 1,820 kg, overall weight: 2,700 kg, axle configuration: 2 axles, loading space length: 3,140 mm, loading space width: 1,750 mm, loading space height: 350 mm, total length: 4,500 mm, total width: 1,930 mm, total height: 1,260 mm, Year of construction: 2026, Humbaur three-way tipper with electric pump and steel grating extension – HTK 2700.31 Description: Itsdpfxezqxxwj Ag Ajn The HTK three-way tipper not only impresses with our consistently high quality standards. It is equipped with a practical hand pump, which can also be easily replaced with an electric hydraulic pump whenever needed. An electric pump is installed in the trailer. This makes tipping your load no longer a challenge, but child's play! Technical data: * Trailer type – Two-axle * Construction type – Aluminum * Rear tipping – 45° * Three-way tipping – 45° * Weight – 880 kg * Gross vehicle weight – 2700 kg * Payload – 1820 kg * Internal length – 3,140 mm * Overall length – 4,500 mm * Internal width – 1,750 mm * Overall width – 1,930 mm * Internal height – 350 mm + steel grating extension 60 cm * Overall height – 1,260 mm + steel grating extension 60 cm * Loading height – 745 mm * Tires – 13 inches Standard equipment: V-drawbar, hot-dip galvanized * Chassis and tipping platform, hot-dip galvanized * Tipping platform made of steel, manufactured in one piece * Humbaur multi-function lighting * Side walls made of anodized aluminum, completely removable * Rear flap, hinged * Tie-down rings mounted in the platform floor, tensile force 800 kg per tie-down ring * Support wheel * Plank shaft as preparation for aluminum planks for easy retrofitting Individual configurations and numerous accessory and equipment options, such as grating or steel sheet extensions, tarpaulins, supports, ramps, etc., are available on request. Also available with a gross vehicle weight of 3000 kg and 3500 kg.

Condition: excellent (used), Buderus GE315/200kw low-temperature boiler with oil burner Itjdpfx Aswauarog Ajn

Condition: ready for operation (used), ATB Motor - 400V / 2860 RPM / 11 A - IP54 / 50Hz with pump - Length: 127 cm, used, normal signs of wear, 100% functional, scope of delivery according to photos ATTENTION: Please inquire for charges for packing and transport separately! ATTENTION: Please enquire for charges for packing and transport separately! Itsdpfjrwtmzjx Ag Asn

Condition: excellent (used), Year of construction: 1990, functionality: fully functional, Dowel and long-hole drilling machine GANNER JUNIOR 320 LBM in very good condition, like new, the machine comes from a small carpentry shop and was used very little there it can be used to mill long holes and drill dowel holes in 2 levels without reclamping 380V, 1500W Speed: 2800 rpm Year of construction: 1990 with this machine, you can mill long holes for, for example, lock housings and similar items, or create all types of frame dowel joints at right angles, flush, and mitered ideal for the production of dowel joints in timber frame construction, furniture, door, window, and stair construction, and for similar applications Itedpfx Agoz I Eggj Asn drilling on 2 levels, the grid and stops, and the design of the machine allow dowel joints to be produced in a very short time, which makes the machine very economical the machine requires a compressed air connection of 6 bar (air consumption is very low) Right-hand rotation mills and drills very well and cleanly with 2 angle stops (one center stop and one side stop, which can be used on both sides) 2 stop rails can be attached on the left and right, the stop rails are 1000 mm long, each with 2 folding stops the workpiece is clamped using 2 pneumatic clamping cylinders the height adjustment from one drilling level to the other is also pneumatic; the pneumatic switch for this is located at the front of the machine, which ensures fast adjustment of grids and drilling levels with a precision 12mm grid rail, which has a center grid and 12 grids on the left and right can be quickly converted for long-hole milling; the machine can then be used without a grid with 2 adjustable stops on the left and right, and then has a working width of max. 420mm the max. borehole height is 100mm the max. borehole depth is 150mm with stop and scale the max. workpiece height is 160mm everything works perfectly we will personally deliver and demonstrate the machine anywhere in Germany for 220.00 euros, so you have no risk when purchasing; delivery to Austria and the EU is also possible on request the machine table is 870mm wide, 140mm deep on the sides, and 350mm deep in the middle professional equipment, not cheap hardware store junk you can start working with the machine immediately with 2 chucks up to 20mm very stable and durable construction the precision guides with the backlash-free ball bearing bushings are in good condition and move smoothly

Condition: new, maximum load weight: 2,270 kg, overall weight: 3,000 kg, axle configuration: 2 axles, loading space length: 3,140 mm, loading space width: 1,750 mm, loading space height: 300 mm, total length: 4,510 mm, total width: 1,890 mm, total height: 970 mm, Year of construction: 2026, Humbaur rear-tipping trailer HUK 303117 with electric pump, enabling easier tipping at the push of a button. Our price: €5,950 including 19% VAT, including delivery charges and vehicle documents! Other models, sizes and versions are also available, or can be ordered and configured individually according to your wishes. Please contact us, we will be happy to advise you personally! Description: The HUK rear-tipping trailers are available as single-axle or tandem-axle models. These trailers are particularly distinguished by the galvanized deck plate with V-groove outer frame and recessed lashing eyes. The tipping angle is 45 degrees. Technical data: Trailer type: Two-axle Construction: Aluminum Rear-tipping trailer, 45° Iedez Acdbopfx Ag Astn Weight: 692 kg + 45 kg electric pump Total weight: 3,000 kg Payload: 2,270 kg Internal length: 3,140 mm Overall length: 4,510 mm Internal width: 1,750 mm Overall width: 1,890 mm Internal height: 300 mm Overall height: 970 mm Loading height: 670 mm Tire size: 13 inches Equipment: Chassis and tipping platform welded and hot-dip galvanized V-groove outer frame with recessed lashing eyes, tensile force 400 kg per lashing ring Galvanized deck floor (3 mm) Side panels 300 mm, foldable all around Tow bar locks Conical corner posts Automatic support wheel Lighting protected in the underbody guard 3-stage telescopic cylinder Double-acting hand pump

Condition: ready for operation (used), Sincron / Calitax 1055-XEHBA pump with Siemens motor - 0.55 kW / 400V / 1400 RPM / 50 Hz, used, normal signs of wear, 100% functional, delivery as per photos. Isdpfx Agox Dwbqs Aotn

Condition: ready for operation (used), ATB Motor - 400V / 2840 RPM / 6,4 / 11 A - IP54 / 50Hz with pump - Length: 120 cm, used, normal signs of wear, 100% functional, scope of delivery according to photos ATTENTION: Please inquire for charges for packing and transport separately! ATTENTION: Please enquire for charges for packing and transport separately! Itodpfx Agortirzj Aon

Condition: like new (used), Year of construction: 2019, Technical Data: Cross-cutting line with punching unit Strip running direction from the operator's side: right to left Coil changing side in strip running direction: left Operator's side, straightening machine in strip running direction: left Raw material: • cold-rolled strip: S320GD; S350GD; S380GD (strip-galvanized structural steels) • plastic-coated steel strip • aluminum • basically dry surface or commercially oiled • laminated strip • stainless steel Uncoiler: Type: Power Coil M-BS 1600 2 coil loading stations The coil storage track is designed so that a distance of 900 mm remains between 2 coils with an outer diameter of 1600 mm Loading semi-automatic Strip width 200 – 1600 mm Max. coil weight: 16 tons Coil diameter inside uncoiler: 508 - 610 mm Coil diameter outside uncoiler: 900 - 1600 mm Spreading range 470 – 625 mm Machine frame movable on linear guides Spreading hydraulically Strip withdrawal from the coil automatically Coil side guidance automatically, 4-point coil side guidance Press roller, rubberized, centrally positioned on the strip, hydraulically Electrical locking of lifting and traversing movement Control system: Control concept LBF – Control Concept LSV SCHULER Cross-cutting shear: Type: SCHULER HSU-1600 Shear gap adjustment is carried out by motor The shear is used to cut the strip end at a right angle before processing the first part of a production sequence. Bridging roller bed: Arrangement of the bridging roller bed upstream of the straightening machine Type: VOMA C1600 N Passage, max. strip width 1600 mm Length of bridging roller bed 1050 mm Material running height in the straightening machine 1600 mm Straightening machine: Type: SCHULER SVH 12-53-70-96 / 160-1600 Straightening speed max. 60 m/min. Straightening speed min. 5 m/min. Number of straightening rollers 12 pcs. Diameter of infeed rollers 160 mm Diameter of straightening rollers 3 x 53 mm, 3 x 70 mm, 6 x 96 mm Loop radius 1600 mm Material running height in the straightening machine 1600 mm Strip side guidance automatically Support rollers to prevent roller deflection All-roller drive Looping unit: Threading process in the direction of roller feed via looping bridge, remote-controlled Automatic loop control for continuous straightening process Loop depth below floor approx. 2,500 mm 4-point guidance through 2 sequentially arranged strip side guides To increase feed accuracy, the feed length is recorded by means of a measuring wheel (arranged in front of the feed rollers) Roller feed: Type: SCHULER AC-RP-160-1600 Feed rollers, diameter 160 mm Loop radius 1600 mm Material running height above floor 1200 mm Drive, upper and lower roller, servo drive via a common distributor gear Special coating of the feed rollers Max. acceleration 15 m/s² Brake rollers: Brake rollers generate the strip pull during the rewinding of the strip material from the system onto the coil, in a generator-like manner Itsdezzrutepfx Ag Aen Adjustment system hydraulically Punching unit with NC tool holder: Type: SCHULER HSU-1600 Design: Double C-frame Punching unit designed as 2 C-frame units, which can be traversed transversely to the strip direction by means of 2 servomotors, for accommodating the punching tools Number of punching tools per side max. 6 pcs. Punching tool, servomotor-driven, 90° rotatable 1 punching cylinder per punching tool Punching force min. 580 kN Max. hole diameter ∅ 90 mm for material thickness 4 mm Manufacturer of punching tools: WILSON TOOL Elevating table: Type: LAWE

Condition: used, Year of construction: 2009, AI Overview A 13-meter tube-in-tube heat exchanger paired with a mono (progressive cavity) pump is a heavy-duty industrial setup designed for continuous heating or cooling of high-viscosity, abrasive, or fiber- and particulate-laden fluids (such as wastewater sludge, digestate, food purees, pulps, or industrial effluents). [1, 2, 3] Core System Components & Description Tube-in-Tube (Double-Pipe) Heat Exchanger (13 Meters): Design: Consists of a concentric layout where a smaller inner tube (often corrugated to boost turbulence and heat transfer) is nested inside a larger outer shell tube. Flow Configuration: The process fluid flows counter-currently through the inner tube, while the service/heating/cooling medium flows through the annular space between the inner and outer tubes. Length & Scale: A 13-meter run (frequently modular or multi-pass/series-connected units mounted on a skid frame) provides an extended thermal exchange surface area suited for duty points requiring significant temperature delta (Δ T) without clogging. Handling Solids: Ideal for fluids containing suspended solids, large particles, or fibers up to tens of millimeters that would choke standard plate heat exchangers. [1, 2, 3, 4, 5, 6] Mono Pump (Progressive Cavity Pump): Function: Acts as a positive-displacement feed pump that delivers a steady, controlled, low-shear flow rate of the product medium into the heat exchanger. Why it fits: Progressive cavity ("mono") technology prevents pulsation and handles abrasive, thick, or high-viscosity slurries smoothly without damaging sensitive cell structures or choking under backpressure. [1] Key Applications Wastewater and sewage sludge heating or cooling. Isdez Ru Eropfx Ag Astn Viscous food-industry processing (sauces, pulps, creams, purees). Industrial effluent and dye-house waste heat recovery. Continuous thermal treatment requiring plug-flow characteristics and easy Clean-in-Place (CIP) maintenance Usage: Cooling or Heating of Viscous Products Previously Used on: Yoghurt and Juice Pastes Pump: Mono Pump Meters of Tube in Tube: 13 Condition: Very Good Available: Immediately

Condition: new, empty load weight: 880 kg, maximum load weight: 2,120 kg, overall weight: 3,000 kg, axle configuration: 2 axles, loading space length: 3,140 mm, loading space width: 1,750 mm, loading space height: 950 mm, total length: 4,500 mm, total width: 1,930 mm, total height: 1,860 mm, tire size: 13, trailer brake: trailer braked, Year of construction: 2026, Humbaur three-way tipper with electric pump and mesh extension 600mm - HTK 3000.31 Our price: €7,750 incl. 19% VAT, 6.4% delivery costs and registration documents! Description: The HTK three-way tipper impresses not only with our usual high quality standards. It is equipped with a practical hand pump, which you can also replace with an electric hydraulic pump at any time if needed. From a permissible total weight of 3,000 kilograms, the electric and hand pump are installed as standard in the trailer. This means that tipping your load will no longer be a challenge, but a piece of cake! Technical data: Trailer type - Twin axle Construction type - Aluminum Rear tipper - 45° Three-way tipper - 45° Weight - 880 kg Total weight - 3,000 kg Payload - 2,120 kg Internal length - 3,140 mm Overall length - 4,500 mm Internal width - 1,750 mm Overall width - 1,930 mm Internal height - 350 mm + 600 mm steel mesh extension Overall height - 1,260 mm + 600 mm steel mesh extension Loading height - 745 mm Tires - 13 inches Standard equipment: V-shaped drawbar, hot-dip galvanized Chassis and tipping platform, hot-dip galvanized Tipping platform made of steel, manufactured in one piece Hand pump, optional electric hydraulic pump from 3000 kg permissible total weight, electric and hand pump Itsdozt N Axopfx Ag Ajn Humbaur multi-function lighting Side walls made of anodized aluminum, completely removable Rear flap, hinged Tie-down rings mounted in the platform floor, tensile force 800 kg per tie-down ring Support wheel Plank slot as preparation for aluminum planks for easy retrofitting

Condition: ready for operation (used), Leistritz 59692 001 L3MF 45/117 pump with EMK KF160M2-2-PTC motor, used, shows normal signs of wear, 100% functional, scope of delivery as shown in the photos. PLEASE NOTE: Please request the costs for packaging and shipping separately! Itjdpfxok Axb Rj Ag Asn

Year of construction: 1986, condition: used, functionality: fully functional, For sale is a complete silo discharge and conveying screw system from a wood processing production facility. The system was in regular operation until production was halted approximately 6 months ago and was subsequently decommissioned. The complete package includes the mechanical silo discharge system, several conveying screws or transport lines, various gear and electric motors, the complete associated electrical control system in the control cabinet, as well as an additional new or unused spare motor. The system was used for discharging and further conveying wood chips or similar bulk material from the silo towards the heating system. Scope of delivery The offered complete package includes, among other things: - complete mechanical silo discharge system - several conveying screws / tubular screws - existing transport and conveying lines - several gear motors and electric motors - Bonfiglioli gearboxes - SEW-EURODRIVE drive technology - NORD gearbox technology - ASEA, ICME and Dietz electric motors - various connection, transition and discharge components - complete control cabinet with control and switching components The complete existing control cabinet is part of the offer. This offer includes not only individual conveying equipment but a comprehensive, cohesive system and spare parts package including the existing control system. Drive technology Various industrial motor and gearbox components from well-known manufacturers are installed. Among others: Bonfiglioli Riduttori Gearbox type MVF 130/2R, 4.00 HP, gear ratio i = 1/35. ASEA Three-phase motor, 0.55 kW, 930 min⁻¹, 380–420 V, protection class IP54. SEW-EURODRIVE Industrial gear motor, 0.55 kW, approx. 1,400/33 min⁻¹. NORD Industrial gearbox, type SK 30F-EC80, gear ratio i = 157.20. ICME Ravenna Iedpsz Iuikofx Ag Ajtn Three-phase motor, 0.55 kW, approx. 920 min⁻¹, protection class IP55. Dietz-motoren Three-phase motor, 0.4 kW, 2,760 min⁻¹, 220/380 V. Further technical specifications and photos of the existing nameplates can be provided upon request. Condition The used components are in a condition appropriate for their age and use. Signs of wear, dust deposits and some superficial corrosion are present. The system is suitable both for possible further use or adaptation to an existing silo system and as a comprehensive spare parts and components package for silo, heating and conveying technology. In particular, the various gear motors, gearboxes, screw components, the complete electrical control system and the additional new spare motor make the complete package interesting for operators of existing older systems. Inspection / Dismantling The system is still located at the previous production site and can be inspected by appointment. Location: 3608 Thun, Switzerland Availability: immediately Dismantling can begin immediately - must be completed by July 31, 2027. Dismantling, removal, loading and transport will be carried out entirely by the buyer at his expense and responsibility. Sale of the complete system in its existing condition, as inspected. Subject to prior sale. Sale with exclusion of guarantee and warranty. Selling price: 4,500.00 EUR Price net, any applicable statutory taxes and duties. Export, customs clearance and import duties are the responsibility of the buyer.

Condition: excellent (used), functionality: fully functional, Year of construction: 2016, operating hours: 2,930 h, load capacity: 2,000 kg, lifting height: 3,670 mm, free lift: 105 mm, load center: 600 mm, mast type: duplex, construction height: 2,365 mm, battery model: PzS, battery capacity: 375 Ah, remaining battery capacity: 100 %, battery voltage: 24 V, fork length: 1,150 mm, fork width: 210 mm, fork thickness: 73 mm, Equipment: UVV, Linde L20 electric high-lift pallet truck – ready for immediate use Linde L20 electric high-lift pallet truck in good condition for sale. The unit is equipped with a new traction battery and is therefore ready for immediate use. New battery Integrated charger Initial lift / ramp lift UVV / FEM 4.004 inspection certificate provided upon delivery Technically flawless Immediately available Inspection possible by appointment Isdpozik R Nofx Ag Astn Transportation can be arranged, and loading on-site is possible. If you are interested or have any questions, please do not hesitate to contact us.

Year of construction: 2026, condition: as good as new (ex-display), functionality: fully functional, machine/vehicle number: S25Synthesi01, Stretch Winder Synthesi TECHNICAL DETAILS Turntable / base frame / Ø 2,400 mm Max. pallet dimensions: 1,650 x 1,650 mm Max. load capacity: 2,000 kg Wrapping height (pallet included) 2,400 mm FILM SLIDE TYPE "OPRS - ONE PRE STRETCH" Film pre-stretch ratio set to 200% Foil application tension electronically adjustable in the programs in different steps Height of turntable 75 mm Height query by light button Frequency-controlled turntable drive (soft start - start/stop) Frequency controlled carriage speed up/down Signal tone at the start of wrapping and stop at the end of the cycle Emergency stop switch according to CE regulations The turntable always stops in the same starting position Fall protection for the film slide Push button for switching on the machine and start & stop function & reset according to CE standards Ø 22 mm ADJUSTABLE PARAMETERS ON THE CONTROL PANEL All function parameters can be set via the display F00 - Screen lock program change F02 - Infinitely variable turntable speed 5-12 rpm Lifting carriage speed can be adjusted up and down independently of each other F03 - lifting carriage speed up from 1.3 up to 5.4 m/min F04 - carriage speed down from 1.3 to 5.4 m/min F05 - Number of wraps on the pallet foot (1 - 10 wraps) F06 - number of wraps on the pallet head (1 - 10 wraps) F09 - Winding height photocell delay F13 - F16 - Foil application tension foot & head wrapping / ascent & descent independently adjustable F62 - Ergonomic height for film change Itedpfx Agez Iqp Tj Aen Foil consumption display (optional) ADJUSTABLE WRAPPING PROGRAMS ON THE CONTROL PANEL 6 storable winding programs F01 - 1 - cross winding (up/down) F01 - 2 - Single wrap (only up or only down) F01 - 3 - Push button for manual functions F10 - F11 - Wrap cycle with preset start and stop height F12 - Winding to a stored height (switching off the light button for the height) F22 / F23 - Winding cycle for cover sheet film F29 - Soft start cycle for edge protection application F30 - F31 - Wrap cycle with gain and adjustable number of wraps Soft start to reduce film tears on sharp pallet edges Winding cycle with manual or motorized line formation (optional) Reinforcement cycle via push button Optionally possible: Turntable size up to Ø2600 mm Mast height up to 3900mm ramp mounting frame Light scanner for black products cutting device Etc. Other systems available from the Ludwigsburg warehouse. Some images may contain options that are subject to a surcharge. Illustration similar

Year of construction: 2026, operating hours: 1 h, condition: as good as new (ex-display), functionality: fully functional, machine/vehicle number: S26LybraOPRS03, LYBRA Easy OPRS / 6 Programs Itjdpfjz Ir Haex Ag Asn With automatic cord formation to reinforce the winding in various steps on the pallet. The LYBRA OPRS is a semi-automatic stretch wrapping machine with a rotating arm that combines key load securing technologies in a compact solution. Thanks to the rotating arm, it is particularly suitable for heavy and unstable loads and optimizes load stability during handling, storage, and transport. ``` TECHNICAL DETAILS - Control panel with key display - Diameter Ø 1,700 mm - Maximum loading dimensions: 1,200 x 1,200 mm - Winding height (incl. pallet): 2,450 mm - Loading height measurement via photocell in automatic mode - Acceleration/deceleration ramps controlled by frequency converter - Adjustable lifting speed (up/down movement) via frequency converter - Safety touch protection - Mushroom-shaped emergency stop button compliant with CE standards - Machine reset button compliant with CE standards - Audible signal at cycle start and phase stop at cycle end ADJUSTABLE PARAMETERS ON THE CONTROL PANEL All function parameters adjustable via display - Standard cycle (up and down) - Half cycle (up only or down only) - Full cycle with lower windings on the same Starting height - Fast cycle (with limited or no overlap) - Layer cycle - Economy cycle (to save some bottom wraps) ADJUSTABLE WRAPPING PROGRAMS ON THE CONTROL PANEL 6 operator-created wrapping programs - All function parameters adjustable on the display - Adjustable speed from 5 to 12 rpm - Carriage lifting speed (up and down movement) independently adjustable from 1.3 to 5.4 m/min - 1 to 10 wraps on the bottom - 1 to 10 wraps on the top - Reinforcement wraps during the wrapping process ACTIVABLE FUNCTIONS: - Key lock - Cycle with start and stop at pre-programmed height - Pallet wrapping height with height sensor (photocell off) - Top sheet cycle, soft start cycle - Wrapping cycle with reinforcement and adjustable number of wraps - Comfort height for easy Roll Change FILM SLIDE OPRS – Motorized pre-stretching system with 2 electronically driven rollers with interchangeable ratios: 150% - 200% (standard) and 250%; – Outer film roll diameter: 250 mm; – Core diameter: 76 mm; – Roll height: 500 mm; – Roll weight: 20 kg; Additional systems available immediately from our Ludwigsburg warehouse. Image similar, may include options.