Used Cnc Machinnig Center for sale (19,711)

Condition: used, Year of construction: 2006, Victor V26-II CNC lathe; with C-axis; with driven tools; FANUC 21i-TB control; chuck: 10"; turning diameter: 520 mm; turning length: 1090 mm; spindle speed: 3,500 rpm; upper turret toolholder with 12 positions, 6 of which are driven; tool presetting device; chip conveyor; oil mist extraction. Kedpfx Aijr E Amgo Rena

Condition: excellent (used), functionality: fully functional, • Muratec MT 25 MYY / Robot Gantry Loader / Bar Loader. • Two C-axes. • Two Y-axes. • Highly automated machine. • 8 kg gantry loader-type robot for part loading and unloading. • 1.5-meter CNC bar loader. • Machine with 9 controlled axes. • Two twin spindles. • Two turrets. • Turrets with 15 positions each, all motorized. • Integrated spindle motor: 15 kW. • Motor starting torque: 420 N·m. • Motorized tool motor: 4 kW. Kedpfx Aiozuxwus Rona • Spindle size: A2-6. • Maximum machining diameter: 370 mm. • Maximum machining length: 920 mm. • Bar feed: 67 mm. • Prismatic guides on all axes. • Two 250 mm Kitagawa hydraulic chucks on each spindle. • Separate compartment for inspecting machined parts. • Automatic finished-part pickup arm for small parts. • Automatic secondary spindle cleaning with air or coolant. • Conveyor belt for finished parts. • Automatic load control and tool wear monitor. • Part transfer system between spindles with automatic torque control. • Fanuc CNC. • Fanuc motors, servos, electronics, and programming. • Rapid traverse speeds: 20 and 25 m/min. • Main spindle speed: 3,500 rpm. • Motorized tool speed: 3,000 rpm. • Turret indexing time: 0.2 seconds. • Rear hinged chip conveyor. • Complete set of static tool holders for external and internal operations included. • Complete set of motorized axial and radial tool holders included. • Machine currently in operation. • Weight: 10,800 kg. • Immediate delivery, unless sold prior to listing.

Condition: excellent (used), Year of construction: 2009, functionality: fully functional, * Mori Seiki NL 2500 SY. * Year 2009. * Y-axis. * C-axis. * 5-axis machine. * 1.5-meter Lns Quick Load bar loader. * Sub-spindle. * 12-station turret, all stations motorized. * Y-axis travel: ±60 mm. * C-axis on both spindles. * Integrated main spindle motor: 18 kW. Kodpfxozuxm As Ai Rona * Integrated sub-spindle motor: 15 kW. * Direct-drive motor for powered tools: 5.5 kW. * Motor starting torque: 640 N·m. * Motors without belts or gear stages. * Main spindle size: A2-8. * Sub-spindle size: A2-6. * Bar capacity: 80 mm. * 250 mm Kitagawa B-210 main spindle chuck with metric system. * 210 mm Kitagawa B-208 sub-spindle chuck with metric system. * Prismatic guides on all axes. * Main spindle speed: 4,000 rpm. * Motorized tool speed: 6,000 rpm. * Daikin oil cooler for both spindles. * Mapps 4 conversational automatic programming system. * Automatic force control and tool wear monitor. * Rapid traverse speed: 30 m/min on the X and Z axes. * Turret indexing time: 0.2 seconds. * Two Renishaw arms for automatic tool measurement. * Communication ports via USB, PCMCIA card, and RS-232. * Installation interface for bar loader. * Automatic workpiece collector. * Dual pedal for independent opening and closing of the main spindle and sub-spindle. * Side-mounted hinged chip extractor. * Extensive range of static and motorized tool holders. * Electrical transformer. * Documentation, parts list, electrical schematics, programming, and operating manual. * Weight: 5,800 kg. * Machine is currently in operation. * It is essential to check the precision videos. * Immediate delivery, unless sold immediately.

Condition: used, Year of construction: 2007, turning diameter 65 mm turning length 150 mm control Siemens 840D spindle passage 75 mm turning length 150 mm c-axis 2x 0,001 ° gripping station 65 mm speeds 5000 U/min rapid traverse 30 m/min turret (x-stations) 3x12 Number of axles 10 St. number of toolholder-holes 36 chip conveyor ja / yes kW coolant filtering unit ja / yes kW Number of working hours 35000 h total power requirement 22 kW weight of the machine ca. 9 t dimensions of the machine ca. 4,4 x 2 x 2,3 + Iemca m Knodpfxszdk Eve Ai Rja DMG Sprint 64 Linear CNC lathe, built in 2007, 10 axes, 2 spindles, 3 turrets with Iemca Master 880 loading magazine Accessories: a large number of tool holders in total 104 off, 24 of them are driven tool holder

Condition: used, Year of construction: 2008, turning diameter / mm centre distance / mm swing diameter / mm Manufacturer: DMG GILDEMEISTER Model: CTX 510 eco Year of manufacture: 2008 Machine type: CNC lathe / turning center Knsdpfjzu A Ukex Ai Rja Control system: Siemens SINUMERIK 810D Powerline Max. spindle speed: 3,250 rpm Spindle speed range: approx. 500–3,250 rpm Spindle power: 33 kW at 40% duty cycle / 22 kW at 100% duty cycle Spindle torque: 630 Nm at 40% duty cycle / 420 Nm at 100% duty cycle X-axis travel: 300 mm Z-axis travel: 1,050 mm Max. turning diameter: 465 mm Max. swing / turning diameter: 680 mm Spindle bore / bar capacity: approx. 76–92 mm (depending on configuration) Front spindle diameter: 140 mm Turret: 12-station Driven tools: Depending on equipment Driven tool speed: up to 4,000 rpm Driven tool power: approx. 8.4 kW Chuck: 250 mm or 315 mm Max. workpiece weight between centers: 350 kg Total power requirement: approx. 50 kVA Power supply: 400 V, 50/60 Hz Machine weight: 7,500 kg Incl. chip conveyor Note: All technical specifications are for guidance only and are subject to change. Actual machine data may vary due to different equipment variants and subsequent modifications. No warranty or guarantee is provided regarding the accuracy or completeness of the technical specifications. The specifications and actual condition of the offered machine are the sole determining factors.

Condition: excellent (used), Year of construction: 2019, functionality: fully functional, Technical details turning diameter 820 mm turning length 6000 mm control Siemens Si 840 D sl max. workpiece weight between centres 4000 kg total power requirement 155 kW weight of the machine ca. 65 t dimensions of the machine ca. 16350 x 3700 x 3850 m Additional information Original purchase price in 2019: EUR 1.550.000,- Time recording from Feb. 2025 Operating hours = 38601 h Main spindle = 1958 h Milling spindle = 1760 h CNC control Si 840D sl Working area 6000 mm Working height 1390 mm Swing diameter over bed slide/bed 820 mm X-axis travel +850 -25 mm Z-axis travel 6820 mm C-axis, smallest increment +/-0.001° Workpiece spindle Spindle head according to DIN 55026 A15 Bathing through 160 mm Front diameter Bearing 240mm 2-stage gearbox, infinitely variable programmable Drive power at 100/60% duty cycle: 78/87kW Speed ranges: 2 Speed range I: 10-501 rpm Speed range II: 10-1750 rpm Knsdpfx Aijzuygdj Rea Torque I, 60% duty cycle: 8000 Nm Torque II, 60% duty cycle: 2308 Nm C-axis Holding torque with backlash-free spindle brake: 3000 Nm Speed: 0-50 rpm Maximum torque (100/60% duty cycle): 3700/4430 Nm Steady rest clamping range: 70-425 mm Turning, drilling, milling head Tool taper Capto C8 Tool magazine Storage locations: 2 magazines, Baluff chip system Max. tool diameter (each position/every 2nd position) 125/200mm Max. tool length 600mm Tool weight 25kg Tailstock Quick diameter 180mm Stroke 170mm Internal taper MK6 Axially force, manually adjustable 5-30 kN Quick tip height adjustment +/-0.15mm Other: Collision monitoring sensor ACS 3-ARTIS Chip conveyor system Coolant system 980l tank and more

Condition: used, Year of construction: 2018, turning diameter max. 356 mm turning length 705 mm control M730 UM Mapps CELOS greates pass round over bed 920 mm Swing dia. over traverse guideway 742 mm turning speed range - main spindle 4.000 min/-1 power capacity - main spindel 18,5 / 15 kW spindle nose JIS A2-8 spindle bore 80 (91) mm C-Axis 0,001 ° Spindle speed range subspindle 6.000 min/-1 power capacity - Sub spindle 11 / 7,5 kW spindle bore 43 mm C-Axis 0,001 ° x-travel 260 mm z-travel 795 mm Knedpfx Aovy Ig Hoi Rea Y - Axis +/-50 mm rapid traverse ( X / Y / Z ) 30 / 10 / 30 m/min number of toolpositions 12 pos. Schank height for square tool 25 mm Drill shank diameter 50 mm turret change time 0,27 sec. Spindle speed - driven tools max. 10.000 min -1 power capacity - driven tools 5,5 / 4,2 kW total power requirement 41 kVA weight of the machine ca. 6,4 t dimensions of the machine ca. 5,0 x 3,0 x 2,3 m CNC - Turning- and MillingCenter DMG MORI - NLX 2500 SY / 700 - Subspindle - Tool-Drive - C, Y-Axis - approx. 12,000 operating hours

Condition: used, Year of construction: 2003, turning diameter 210 mm turning length 580 mm control 840 D Siemens centre height 190 mm turning diameter over bed 330 mm turning dia. over face-slide 260 mm turning speed range - main spindle max. 4.000 min/-1 power capacity - main spindel 10 / 7,5 kW max. Torque 115 / 86 Nm spindle bore 68,5 mm max. usable bar diameter 51 mm C - Axis 0,001 ° Knodetqmmuopfx Ai Rja travel -x axis 185 mm travel -z axis 455 mm number of toolpositions 12 pos. tool taper VDI 30 Driven Tool Stations: 6 pos. tailstock adjustment 400 mm intake pressure max. 4.000 N rapid traverse X: 20 / Z: 30 m/min Feed force ( X / Y / Z ) 4,5 kN total power requirement 21 kW weight of the machine ca. 3,2 t dimensions of the machine ca. 8,0 x 2,2 x 2,0 m CNC Turning- and Milling Center GILDEMEISTER - CTX 310 V3 - incl. 2x reduction tubes

Condition: good (used), Year of construction: 2009, Parts shown by hand not come. Technical details are shown on pictures. Kedpfx Aiszlbzqj Rena

Condition: used, Year of construction: 2014, Working dimensions: X = 3425 mm, Y = 1287 mm, Z = 325 mm. Max. workpiece height: 180 mm. Max. clearance under the hood: Y = 1450 mm / Bumper version = 1370 mm. Includes CabinetControl Base, 1 machine license, and 1 office license. Milling head 7830, 1-stage, power 6.5 kW, air-cooled, n(max.) 1000 - 18000 min-1, infinitely adjustable. Max. power at 12000 min-1 to 18000 min-1 with HSK-F 63 tool holder, with collet chuck with HSK shank. Drilling unit 7884, 14 spindles, 10 vertical spindles individually accessible, arranged in an L-shape, 6 in the X direction and 4 in the Y direction. Drive power 3 kW, 32 mm pitch. Sawing unit: Integrated sawing unit for sawing/grooving in the X direction, n(max.) 1000 - 5650 min-1, infinitely adjustable. Tool holder: A = max. DM = 125 mm. Kedpfsy Tpz Rox Ai Rjna Location: Supplier.

Condition: good (used), Year of construction: 1991, functionality: fully functional, total height: 1,850 mm, total length: 3,450 mm, total width: 1,800 mm, overall weight: 5,200 kg, Model: MAZAK QUICK TURN 28 N Year of manufacture: 1991 Control system: Mazatrol CAM T32-2 Technical data Work area Max. swing diameter: 510 mm Max. turning diameter: 320 mm Max. turning length: 972 mm Bar work up to diameter: 70 mm Main spindle Speed range: 30 – 3,000 rpm Main drive power: 22 kW Constant torque: 432 Nm Spindle nose: A2 – 8 inches Spindle bore: 80 mm Tool turret Number of tool positions: 8/16 Travel distances X-axis: 200 mm Z-axis: 1,020 mm Knodpfx Aiezvf S Uo Rsa Rapid traverse rate Rapid traverse: X-axis: 18 m/min Z-axis: 24 m/min X/Z-axis: 0 - 5,000 mm/min Tailstock Mount: MK 5 Tailstock travel: 835 mm Quill stroke: 130 mm Machine data (with standard equipment) Total connected load: 41 kVA Machine weight: 5,300 kg Machine dimensions (L x W x H): 3.45 x 1.80 x 1.85 m

Condition: good (used), Year of construction: 1988, functionality: fully functional, total height: 1,800 mm, total length: 2,550 mm, total width: 1,600 mm, overall weight: 4,300 kg, Model: MAZAK QUICK TURN 15-U Year of manufacture: 1988 Control system: Mazatrol CAM T2 Working area: max. swing diameter: 440 mm max. turning diameter: 270 mm max. turning length: 500 mm bar work up to a diameter of max. 51 mm Main spindle: speed range: 36 – 3,600 rpm main drive power: 15 kW constant torque: 230 Nm spindle nose: A2 – 6 inches spindle bore: 61 mm Tool turret: standard version: 8-position turret indexing time: - 1st station: approx. 0.5 s Kjdpfezvf H Sox Ai Rona Travel ranges: turret – travel range: x-axis: 155 mm z-axis: 510 mm Rapid traverse rate: x-axis: 12 m/min z-axis: 24 m/min Tailstock: tailstock travel: 460 mm tailstock spindle: MK 4 tailstock quill stroke: 130 mm Machine data: total connected load: 31.3 kVA machine weight: 4,300 kg machine dimensions: L x W x H: approx. 2.55 x 1.60 x 1.80 m

Condition: used, Year of construction: 2015, functionality: fully functional, Model: OKUMA MULTUS U3000 2SW 1500 (CNC turning and milling center) Control: OKUMA OSP-P300S Turning length: approx. 1,500 mm Max. turning diameter: up to 650 mm Tool system / interface: HSK-A63 Main spindle: Drive power: 22 kW Torque: 427 Nm Max. speed: 5,000 rpm (2 gear stages) Spindle nose: Short taper size 6 Spindle front bearing: Ø 120 mm Spindle bore: Ø 80 mm 3. Counter spindle (Okuma motor spindle) Travel: Traversable on the W-axis Drive power: 22 kW Torque: 427 Nm Max. speed: 5,000 rpm Spindle nose: Short taper size 6 Spindle front bearing: Ø 100 mm Spindle bore: Ø 62 mm Tool spindle / Milling spindle (Okuma motor spindle) Drive power: 22 kW Torque: 120 Nm Knjdpfxozu I U Ae Ai Roa Max. speed: 12,000 rpm Tool holder: HSK-A63 Axes & Travel Ranges C-axis: 360° (Indexing / Positioning in 0.001° increments) Y-axis: Stroke +125 mm / -125 mm (Total stroke 250 mm) B-axis: 240° (Indexing / Positioning in 0.001° increments) Tool magazine & Turret Tool Magazine (ATC): 120 positions Lower turret: 12 stations with direct mounting system "radial" Turret guides: ZB-axis with cylindrical roller linear guide XB-axis with slide guide Coolant supply / Internal coolant supply (ICS): max. 20 bar (including bag filter) External cooling for tool spindle: max. 8 bar Accessories: Short loader LNS Quick Load Seri O III

Condition: used, Year of construction: 2001, - X = 2 x 2,400 - Y = 1,800 mm - Main spindle 12 kW - 18-position tool changer - Gluing unit with 6-position coil magazine Knedpfx Aozux Uasi Rja Used CNC machining center Manufacturer: IMA Type: BIMA P 480 V, 180/480 Year of manufacture: 2001 Alternative processing: - X = 2 x 2,400 - Y = 1,800 mm - Main spindle 12 kW - 18-position tool changer - Gluing unit with 6-position coil magazine Working area: For standard machines, Y = 1,800 mm Changing table area for alternating machining: X = 2 x 2,400 mm / Milling and drilling X = 2 x 2,100 mm / Gluing CNC line control IMATRONIC NT 231 Automatic adjustment table with clamping plates Main spindle 12 kW With integrated C-axis, 360 degrees Automatic tool/adapter unit changer, 18-position 1 edge banding unit VT100 With glue application device Edge thickness: 0.4 - 3 mm For 4-sided edge banding and all-round edge banding with butt joint 6-position roller magazine 1 trimming unit 0.8 kW Including adapter unit - Saw, fixed at 90 degrees - Horizontal milling unit (corner release) - Chamfer milling unit - Straight milling unit - Profile drawing blade Note: The technical data and descriptions are a transcript of the original order confirmation. The data is for informational purposes only and is not binding.

Condition: used, Year of construction: 2003, - Workpiece length: 800 - 3000 mm - Workpiece width: 350 - 1400 mm - Workpiece thickness: max. 70 mm with edge / max. 80 mm for milling - Main spindle 12 kW - Tool changer, 18-position CNC machining center Manufacturer: Homag Type: PROFI BAZ20/30/16/V/D Year of manufacture: 2003 Technical data Homatic - CNC control CNC programming system WOODWOP Postprocessor Workpiece dimensions - Workpiece length: 800 - 3000 mm - Workpiece width: 350 - 1400 mm - Workpiece thickness: max. 70 mm with edge / max. 80 mm for milling - Edge band width: min. 120 mm - Weight: max. 150 kg Throughfeed table - Longitudinal console 1, fixed installation - Longitudinal console 2, manually adjustable via width adjustment in the Y-direction Knjdpfx Aiozux Tpo Rja - 8 vacuum clamps 125 x 50 x 100 mm - Working height, bottom edge of workpiece: 950 mm Motor, width adjustment, longitudinal console, traversing table - For different workpiece widths via servo drive for throughfeed table - Per longitudinal console Chip conveyor - Chip and waste disposal via integrated chip conveyor under the longitudinal traverse Stop pins for top layer overhang - Stop pins with lifting-rotating mechanism for workpieces with max. 20 mm top layer overhang - Individually selectable, end position monitored, stroke 110 mm - For manual placement of doors Vacuum pump 100/140 m3/h Unit for positioning the vacuum clamps - Mounted on the unit carrier with pneumatic extension console - For max. 4 vacuum clamps per longitudinal console Main spindle 12 kW - Tool holder HSK F63 - Extraction system for all tools and units - Three-phase asynchronous motor 12 kW at S1, water-cooled - Tool weight: max 6 kg incl. holder - Tool length: max. 200 mm from the motor spindle bottom edge - Tool diameter: max. 180 mm for milling tools / max 200 mm for sanding tools - Frequency converter: 15 kW - Speed range: 1500 - 18000 rpm, stepless, programmable - Full rated power from 12000 rpm Unit interface for the main spindle - For connecting the machining units - Pneumatic and swivel drive interface - C-axis with torque transmission and 3-point support Tool changer, 18-position For tools and units with HSK F63 Tool weight: 6 kg Tool length: max. 200 mm from the motor spindle bottom edge The following tool and unit configurations are possible - 18 x max. 130 mm - 9 x max. 180 mm and 9 x max. 70 mm - Tool diameter max. 200 mm for sanding tools - Tool changer can be raised for a moving pick-up station on the left side Drilling/milling unit, 4 spindles, for tool changer - For automatic changing in the main spindle - Collet holder ER25 up to max. 16 mm shank diameter - Tool protrusion max. 50 mm - Speed: max. 13500 rpm - Standard collet 10 mm - Infinitely swiveling via the C-axis - Without tool Lock case milling unit, 2 spindles, D=16/20 - With integrated blow-out nozzle - Two-sided spindle outlet with counter-rotating direction - Speed: 12000 rpm - Infinitely swiveling via the C-axis - Without tool 1x Weldon chuck: 20 mm - Reducing sleeve for tool 16 mm - Total tool length: 180 mm - Tool protrusion: max. 135 mm 1x ER16 collet with 10 mm - Total tool length: max. 70 mm - Tool protrusion: max. 40 mm Sawing/drilling unit, swiveling, for tool changer - For miter cuts and angled drilling - Manually swiveling 0 - 90 degrees - Mounting flange 30 mm with countersunk head screws - Tool diameter 52 mm - Prepared for miter saw: max. 180 mm - Drill chuck with Weldon chuck: D=10 mm - Speed: max. 9000 rpm - Infinitely swiveling via the C-axis -

Condition: used, Year of construction: 2008, - Machining area 4300 x 1250 mm - 8 pcs. workpiece supports - Main spindle 7.5 Kw / 11kw - Vertical drilling unit - Horizontal drilling unit - Dado cutter - Tool changer for 18 positions CNC machining center Manufacturer: IMA Type: Bima 300 Year of manufacture: 2008 Knjdpfx Aozux Tiji Rsa Technical data - Machining area 4300 x 1250 mm - 8 pcs. workpiece supports - 1x Main spindle 7.5 Kw / 11kw (S1 / S6) HSK F63 1500 - 18000 rpm - Horizontal drilling unit - Vertical drilling unit - Dado cutter - 2x Vacuum pump, each 90 m³/h - Safety mats - IMA Wop software + office license

Condition: used, Year of construction: 2016, CNC machining center Manufacturer: Format4 Type: Profit H500S 16.56 Year of manufacture: 2016 Kjdszux Rbjpfx Ai Rona Technical data Working area: X = 5540 mm Y = 1570 mm Z = 350 mm 5-axis main spindle Drilling head 12 vertical drilling spindles, 32 mm pitch 6 horizontal drilling spindles, 32 mm pitch, 4 in the X-axis and 2 in the Y-axis Dado head unit arranged in the X-axis Motor controlled via inverter up to 7,500 RPM 1 Becker vacuum pump 2 tool changers

Condition: used, Year of construction: 2007, - Working area: X = 4600 mm / Y = 1935 mm / Z = 275 mm - CE safety devices - 8 ATS plate holders - L = 1525 mm - 24 sliding rails - Automatic positioning of 8 plate holders and sliding rails (EPS X-Y) - Conveyor belt for removing chips and scrap - Pneumatic locking system, divided into 2 working areas in X - 8 rear reference stops with a stroke of 115 mm - 8 stops with a stroke of 140 mm, positioned at 1175 mm (L = 1280 - 1525 - 1800 mm) - 8 stops with a stroke of 140 mm, positioned at 770 mm (L = 1280, 1525, 1800 mm) - 4 lateral stops with a stroke of 140 mm (2 left + 2 right), including pneumatic system. - 4 removable center stops with a stroke of 140 mm (2 left + 2 right), including pneumatic system. - Sensor for detecting lowered stops. - Pneumatic system for lifting rod holders. - 6 lifting rod holders for easy loading - H = 74 mm modules. - Vacuum system for a 250 m3/h pump - 250 m3/h rotary vane vacuum pump for standard vacuum system Composition C3-A1 - Device for mounting a chip deflector with a pneumatic or inductive sensor on a 5-axis machining unit. - Flange for mounting aggregates on a work unit with 5 interpolating axes. *Aggregates can only be used if the spindle is in the vertical position. Composition C3-P2 - Additional Z-slide for rear work units, controlled by an independent Z-axis - 16 vertical and 4 horizontal drilling spindles in the Y direction - Chain-type tool changer with 22 positions at 180 mm center distance - Iron gripper for chip deflectors with pneumatic or inductive sensor, positioned in the chain-type tool changer - RH chip deflector with inductive sensor for standard spindle or 15 kW 5-axis spindle * requires the device for the chip deflector * requires the flange for mounting aggregates when using a 5-axis spindle * requires the C-axis when using a standard spindle - Liquid cooling unit for liquid-cooled systems, can cool two spindles or one spindle and a liquid-cooled drilling head. - Automatic lubrication system - Control unit with 5 interpolating axes. This unit enables numerically controlled interpolation of the spindle on 5 axes. The spindle has high power while simultaneously having reduced dimensions. Knsdpszux Nwsfx Ai Roa Note: - Additional overhauled 5-axis main spindle - 8 horizontal drilling spindles, 12 vertical drilling spindles, and nut saw are out of order.

Condition: used, Year of construction: 2005, CNC machining center Manufacturer: Homag Type: PROFI BOF 722/58/18/F/K Year of manufacture: 2005 Technical data - Machining area: X = 6000 mm / Y = 1800 mm / Z = 380 mm from the suction cup Knedpfxszux Imo Ai Rja - 5-axis swivel head (replaced in 2019) - Rear spindle with Flex5 unit - 2 traversing tool changers with 18 positions each - Computer with Windows 10 (new 1.5 years ago) - Woodwop 8.1 - 2nd vacuum pump, can be switched on/off separately

Condition: used, Year of construction: 2021, Technical Data Automatic Central Lubrication Working Area Axis Travel X = 4000 mm Y = 1670 mm Z = 500 mm Working Range X = 3300 mm Y = 1280 mm Z = 250 mm, clearance height depending on the clamping system Operator Terminal on the Left Side of the Machine Handheld Terminal for Controlling Axis Speed, Including an Emergency Stop Switch Machine Software: Woodflash Consisting of: - CNC Board - Tool Database - Program Editor Position Indicator for Workpiece Support and Vacuum Suction Cup Vacuum Connection for Template Milling on the Left Side of the Machine: Connection: 12 mm 1 Vacuum Pump with a Total Suction Capacity of 90 m3/h at 50 Hz or 108 m3/h at 60 Hz Milling Spindle 12 kW (S6) HSK F63 12 kW (S6) Kodpfxezux Iae Ai Rona Full Rated Power at Approximately 12,000 RPM Speed: 1000 - 24,000 RPM Air-Cooled C-Axis 0-360 for Milling Spindle 12-Position Linear Tool Changer on the Left Side of the Machine Frame, Including a Pickup Station for Aggregates Max. Tool Diameter: 250 mm Max. Tool Length: 240 mm Drilling Head DH 16 4H 2S 12 Vertical Spindles 7 Spindles in the X-Direction and 5 Spindles in the Y-Direction 4 Horizontal Spindles 2 Spindles in the X-Direction and 2 Spindles in the Y-Direction Pre-Travel = 70 mm Drilling Length = 70 mm Shaft Diameter D = 10 mm 2 Nut Saws, One Each in the X and Y Directions Max. Saw Blade Diameter: 120 mm Max. Blade Thickness: 5 mm Max. Speed, Continuously Adjustable: 7500 RPM Safety System with Light Curtain on the Front

Condition: used, Year of construction: 2021, CNC machining center with a fixed worktable, double-sided driven gantry, and a 5-axis milling spindle with continuous interpolation. Machine for processing solid wood, wood-based materials, and various plastics. Base machine and gantry Machine base and gantry made of a ribbed, welded steel construction, offering very high rigidity. Guidance system and drives Gantry movement of the X and Y axes with rack and pinion and servo drive. DUAL GANTRY MOTORIZATION: Drive of the X-axis with two synchronized servo drive motors. Movement of the Z-axis via ball screw with servo drive. Dust-protected linear guide. Safety system Three-part safety floor mats allow for the placement of workpieces in the non-active area. Moving partial enclosure with a Lexan protective window for the machining units. Central lubrication Automatic central lubrication Vacuum system Vacuum system for pendulum machining with constant suction power in both work areas. Machine operation The machine is equipped with a cable-guided remote control for performing basic functions. Kodpfx Aszux H Aji Rsna Electrical equipment Dust-protected control cabinet (CE) according to IP 55 standard, including an air conditioning unit and a mobile control panel. Machine control OSAI Open Numerical Control 5-axis swivel head Z 700 Movement of the C-axis and B-axis via brushless servo drives - Maximum rotational speed: 750 /2 sec. - Rotation C-axis: Swivel axis: +/- 110 Technical data - max. travel speed X-axis: 60 m/min - max. travel speed Y-axis: 60 m/min - max. travel speed Z-axis: 24 m/min - Vector speed: 80 m/min - max. workpiece height: 500 mm - Machining area: 4210 x 1605 mm (Extended working area) - Compressed air supply: 7 bar - Suction power: min. 2200 m3/h - Suction speed: min. 28 m/s - Suction nozzle: 160 mm Work table Comec Designed Phenolic resin table, designed as a grid table, grid dimension 50 x 50 mm, for accommodating Cosmec suction systems and templates. The work table is divided into two work areas. Threaded holes in the table to mechanically fix workpieces, 3 pcs. retractable stops Vacuum pump Vacuum pump 250/300 m3/h (50/60 Hz), power: 5.5 kW Main spindle 5-axis spindle: 18 kW main spindle, liquid cooling, tool interface HSK 63 F - 15 kW in S1 operation - 18 kW in S6 operation - Ceramic bearings - Direction of rotation: left/right - Spindle speed: 500 - 24000 rpm Extraction hood Extraction hood controlled via NC program, adjustable in height. 2 x Tool changer Moving 12-position tool changer for tool interface HSK 63 F - max. tool diameter 150 mm, if adjacent position is free - max. tool diameter 120 mm, if adjacent position is occupied - max. tool weight: 6 kg - max. weight of tool and holder: 40 kg Tool length measurement Station for automatic length measurement of the tool Note: Current status of the 5-axis simultaneous machining software through a maintenance contract.

Condition: used, Year of construction: 2019, CNC Machining Center FELDER FORMAT4 Profit H200 13.33 Year of manufacture: 2019 New machine (used only for demonstration purposes in a school) Number of axes: 4 X-axis travel: 4000 mm Y-axis travel: 1670 mm Z-axis travel: 500 mm Technical specifications Spindle power: 12 kW Spindle speed: 24,000 RPM Additional information Working area (maximum panel size) X: 3300 mm Y: 1280 mm Z-distance: 250 mm Spindle: Tool interface: HSK F63 Rated power at: approx. 12,000 RPM Cooling: Air-cooled Rotation: CW / CCW Tool magazine Linear tool magazine (mounted on the side): 12 positions Additional linear magazine on the gantry: 4 positions Max. tool diameter: 250 mm Max. tool length: 300 mm Drilling unit Model: DH 24 6H 2S Vertical spindles: 18 (12 in X, 6 in Y) Horizontal spindles: 6 (4 in X, 2 in Y) Max. drill length: 70 mm Max. tool diameter: 10 mm Dadoing machines: 2 (X and Y) Max. saw blade diameter: 120 mm Max. speed: 6,000 RPM Vacuum table 6 supports (instead of 4) Two-circuit vacuum system Height of vacuum cups: 100 mm Pneumatic support locking Adjustable side stops (Y-axis) Axis system X-axis: Rack and pinion drive Y/Z-axis: Ball screw drive Linear guides in all axes Automatic central lubrication Control and software CNC control with CAD/CAM software 3D simulation preview DXF import capability Parametric programming Remote maintenance package (internet-enabled) Kodszuxi Rspfx Ai Rsna

Condition: used, Year of construction: 2005, Technical specifications: - Machining area: 2500x1000 mm - Travel range X-axis: 2980 mm - Travel range Y-axis: 1280 mm - Travel range Z-axis: 200 mm Kedpfjzuxhtsx Ai Rena - Programmable speed in the X-axis: 25 m/min - Programmable speed in the Y-axis: 30 m/min - Programmable speed in the Z-axis: 22.5 m/min - Vector speed: 40 m/min - 16 spindles, 4000 rpm, 2.2 kW (10 vertical and 6 horizontal) - Electric spindle with 6.6 kW, 12000 - 18000 rpm, HSK-63 - Side tool magazine with 7 positions - Footprint (L x W x H): 6970x3000x2680 mm - Weight approx. 3295 kg

Condition: used, Year of construction: 2025, table length: 3,100 mm, table width: 2,100 mm, Technical data - Table size: 3100 x 2100 mm - 4-axis main spindle - Linear tool changer, 16 positions - 2 vacuum pumps Knsdpfx Aijzuw Tze Rja - 12 vertical drilling spindles - 1 dado blade

Condition: used, Year of construction: 2012, - Machining area: 5300x1400 mm - Main spindle replaced 3 years ago - 18-position tool changer Technical data Machining area - In the X direction: 5300 mm - In the Y direction with main spindle + WZ-0: 20 mm: 1400 mm - In the Y direction with drilling unit: (all vertical drills) 890 mm - Single-position machining: X = 2 x 2550 mm - Free space in the center: X = 200 mm - Alternating field machining: X = 2 x 2250 mm - Free space in the center: 800 mm 1 automatic tool/adapter changer magazine - Arrangement: mounted on the support, moving in the X direction - Disc changer with 18 magazine positions Guidance system - All axes are equipped with pre-tensioned, surface-hardened precision roller guides. Central lubrication - Manual central lubrication for all main axis linear guides and Z ball screw. 1 vacuum pump, 90 m3/h Console table consisting of: - 2 work piece stops fixed on the right and 2 on the left in the X direction, for movement in the Y direction - 10 adjustable support arms in the X direction, each with a rear stop - All stops are controlled by the program - The suction plates are fixed via the patented 2-circuit clamping system, eliminating the need for hoses. - 8 smooth support rails, automatically retractable - 2 push buttons for the workpiece clamping/releasing function Additional 2nd vacuum pump, 90 m3/h 1 additional central stop row, for centering workpieces Chip conveyor 1 main spindle - Drive power: 10.0 kW in S-6 operation - 7.5 kW in S-1 operation - Tool holder: HSK F63, taper diameter = 38 mm, similar to DIN 69893 - Speed range: infinitely variable RPM, programmable 1 centrally integrated CNC axis, rotating 360 degrees - for all adapter units, with torque support on the main spindle and pneumatic interface 1 vertical drilling unit l14 with 6 spindles, horizontal and attachment unit for a dado cutter - Horizontal drilling units with 2 outputs each Attachment unit for a dado cutter - Swivel range: 0 or 90° Control system ICOS CNC Modern, powerful PC-based control system with: - User-friendly interface with Windows standards - Trajectory control of all servo axes - Job list / order processing - IMA backup and recovery system on two hard drives - Uninterruptible power supply (UPS) Knjdszuw Rtjpfx Ai Roa IMAWOP software package - for dialog-oriented creation of CNC machining programs - - 3D view and basic simulation of the programmed workpiece, the suction cups and consoles including tool and adapter display.