Used Coating Drum for sale (8,445)

Condition: new, Year of construction: 2025, functionality: fully functional, total height: 5,600 mm, total length: 11,200 mm, total width: 5,100 mm, type of input current: three-phase, warranty duration: 24 months, inner dimension height: 4,970 mm, inner dimension length: 11,000 mm, temperature: 80 °C, inner dimension width: 5,000 mm, air demand: 52,000 m³/h, input voltage: 380 V, heating capacity: 250 kW (339.91 HP), power: 45 kW (61.18 HP), fuel: liquid petroleum gas (LPG), input frequency: 50 Hz, energy consumption: 45 kWh, insulation thickness: 50 mm, nominal power: 250 kW (339.91 HP), sheet thickness steel (max.): 2 mm, Equipment: lighting, * Air Preparation Unit: The air preparation unit is a recirculation system that supplies the cabin with filtered fresh air and exhausts used air during the painting process. It heats the air to 60 °C, mixes the used air with 10% fresh air via an automatic multi-damper system, and reheats the air before routing it back into the cabin. The air is heated using a burner and a heat exchanger, both made of high-quality 304 stainless steel and housed within the fresh air unit. During painting, the air is filtered twice (via front and ceiling filters) before it enters the cabin. The contaminated air is also filtered twice (through inlet and outlet filters) before it exits via the exhaust unit. Air preparation units are insulated like the side walls to minimize heat loss and are protected against potential vibration and noise thanks to rubber seals on the covers. The exhaust air is regulated by a damper in the outlet duct, which helps control the internal pressure of the cabin. * PRINCIPLES OF CABIN OPERATION: The processes in the cabin are controlled via a control panel that manages the following steps: * PAINTING PROCESS: During painting, 100% fresh air is drawn in from outside and passed through front filters before entering the distribution chamber at ambient temperature. The air is then expelled by the extraction unit. Floor filters (paint stops) capture paint particles, and the air passes through the final exhaust filters before being discharged. * FLASH-OFF PROCESS: After painting, the cabin operates for approximately 15 more minutes to purge residual solvents and thinners. During this phase, fresh air from outside continues to circulate in the cabin. * DRYING PROCESS: In this phase, 80% of the air passing through the cabin is heated to 60 °C and supplied to the cabin via a distributor. As 20% of the solvent is released during drying, these solvents are expelled with the exhaust air. Industrial coatings are typically dried at 60 °C, but the cabin temperature can be adjusted via the control panel as required. * COOLING PROCESS: After the 30-minute drying process, the coil is deactivated via the control panel, the pneumatic damper closes, and the extraction system restarts. During the 5-minute cooling phase, fresh air from outside circulates in the cabin, after which the system stops automatically. ELECTRICAL AND ELECTRONIC EQUIPMENT: These control panels manage the functions and operation of all machinery and devices inside the cabin. The control panel is constructed from durable galvanized sheet metal and steel profiles and is fully enclosed to protect against dust and moisture. Electrical devices and control panels: • The control panel contains essential components such as circuit breakers, fuses, indicator lamps, thermal relays, contactors, and connectors. • Heat-resistant cables are used for command and control lines between the panel and motors or other electrical devices. Iedpfxjwzl Hxj Ag Aetn • Electrical wiring is designed to allow for cabin relocation if necessary. • Operating devices use 380 V 50 Hz, while control devices use 220 V.

Condition: new, Year of construction: 2024, functionality: fully functional, ⚡️ Top Service ⚡️ Fast Delivery ⚡️ Excellent Support! ✈️ Price includes shipping within Germany – No additional transport costs! ✈️ Fast delivery: Only 6 weeks after receipt of payment! PROFESSIONAL POWDER COATING HAS NEVER BEEN THIS EASY! Looking to expand your business and enter the world of professional powder coating? The PEF2.5+ is the perfect solution for beginners! This high-performance system allows efficient, cost-effective, and high-quality coating of car rims and smaller workpieces – with minimal effort! ✨UNBEATABLE PROMOTION – ONLY UNTIL THE END OF MAY!✨ Take advantage of this limited-time offer before it's too late! PONY Luxury Coating – QUALITY THAT CONVINCES! ✅ Plug & Play system – Delivered fully assembled, ready to use immediately! ✅ 100% European manufacturing – No China products, only top quality built to European standards! ✅ Modular & expandable – Additional options for greater performance and flexibility! ✅ All spare parts included – Long-term use with no hidden extra costs! ✳️Maintain your liquidity! We offer a variety of financing options to ensure your investment has the best chance of success. Contact us today. ✳️ ✨✨Buy directly from the manufacturer and secure price and quality advantages!✨✨ ☘️Environmentally friendly☘️⚡️Green Energy⚡️☘️ Powder oven + powder booth + powder gun Complete Starter Package PEF2.5+ ⭐ Powder oven with electric heating ✔️ INTERNAL WIDTH: 1,505mm ✔️ HEIGHT: 1,800mm (from air duct) ✔️ INTERNAL LENGTH: 2,500mm ✔️ Thermoblock unit dimensions: 785x1800x2210mm; heating capacity is 30 kW/h; recirculation fan is 1.5kW/h – 1 pc.; exhaust fan is 0.54kW/h. ✔️ Double-wing door with thermal insulation and silicone seal. ✔️ Guide rails for rack trolleys are manufactured according to the dimensions specified on the base plates. ✔️ Specially designed air duct for homogeneous air distribution inside the curing oven. ✔️ Electrical panel materials by Siemens and Schneider. This curing oven does not include a PLC system. PLC is available as an option. ✔️ Curing temperature, curing time, and heater unit function are adjustable. At the end of the program, an alarm and light signal from the buzzer will indicate completion. ✔️ Additionally, a product transport trolley with cast wheels is located inside the oven. ⭐ Powder coating booth ✔️ Dimensions: 800x1930x2200mm (including fan) ✔️ Teflon filters: 4 pcs. ➢ Filter suction fan: 4kW x 1 pc. (6,000m3/h – 200mmSS) ✔️ 36W LED lighting x 1 pc. ✔️ Bottom drawer x 1 pc. ✔️ Control panel for air intake and powder spray regulation ✔️ DELTA frequency converter ✔️ Heavy-duty rollers under the coating booth ✔️ Additional filter at the fan outlet Isdpfx Aewfhu Hsg Ajtn ⭐ Powder coating gun E-Coat+3 Master with Multicolor (vibration table) Enquire now – Get your business ready for the future! ☀️ 2-YEAR WARRANTY ☀️ ☀️All our machines are CE-certified and necessary machines have ATEX certificates.☀️

Condition: used, Year of construction: 1997, operating hours: 2,500 h, Ammann AC 110 CE Year of manufacture: 1997 !!!! ONLY 2500 HOURS !!!! !!!! GERMAN MACHINE, FIRST HAND !!!! Diesel engine, 120 hp Immediately ready for use ---- Visit our website: German/English/Serbian/Croatian/Bosnian/Bulgarian... Goran German/English/…? …? … Roman We will gladly assist you with financing or leasing. EU sale: net price upon presentation of company documents and VAT number. VAT deposit: 2000 € Our services for you: - Customs registration - Export documents and EUR1 Itedpfx Agjz S S E Es Aen - Worldwide transport - Accommodation - Transfer from Munich Airport or Passau train station

Condition: new, Year of construction: 2025, total height: 4,000 mm, total length: 7,000 mm, total width: 3,000 mm, warranty duration: 24 months, temperature: 80 °C, air demand: 36,000 m³/h, input voltage: 380 V, heating capacity: 345 kW (469.07 HP), power: 40 kW (54.38 HP), fuel: liquid petroleum gas (LPG), energy consumption: 40 kWh, insulation material: Mineralwolle, insulation thickness: 50 mm, nominal power: 345 kW (469.07 HP), Equipment: lighting, MAIN STANDARD Our paint booths are designed to meet all necessary requirements for paint application, including air filtration, extraction, lighting, and a controlled environment. Booth processes are managed via a PLC system, ensuring that desired values are maintained consistently. OPERATING PRINCIPLES OF THE BOOTH The booth’s processes are managed through a control panel, which oversees the following steps: PAINTING PROCESS During painting, 100% fresh air is drawn in from outside and passed through front filters before entering the distribution chamber at ambient temperature. The air is then expelled through the extraction unit. Floor filters (paint stop filters) collect paint particles, and the air passes through final exhaust filters before being discharged. FLASH-OFF PROCESS Itedpswzmcbjfx Ag Asn After painting, the booth continues operating for approximately 15 minutes to purge residual solvents and thinners. During this phase, fresh air circulates from outside into the booth. DRYING PROCESS In this stage, 80% of the air passing through the booth is heated to 60°C and introduced via a distribution system. Since 20% of the solvent is released during drying, it is expelled with the exhaust air. Industrial coatings are typically dried at 60°C, but the booth temperature can be adjusted as needed via the control panel. COOLING PROCESS After the 30-minute drying cycle, the coil is deactivated via the control panel, the pneumatic damper closes, and the extraction system restarts. During the subsequent 5-minute cooling phase, fresh air from outside circulates through the booth, after which the system shuts down automatically. ELECTRICAL AND ELECTRONIC EQUIPMENT These control panels govern the functions and operation of machines and devices housed within the booth. The panel is made of durable galvanized sheet and steel profiles and is fully enclosed to protect against dust and moisture. Electrical Equipment and Control Panel: • The control panel contains essential components such as circuit breakers, fuses, indicator lamps, thermal relays, contactors, and connectors. • Heat-resistant cables are used for command and control connections between the control panel and motors or other electrical devices. • Electrical wiring is designed to accommodate booth relocation if needed. • Operating equipment uses 380 V 50 Hz, while control devices operate at 220 V. • The booth’s operation time can be monitored on the electronic control panel, enabling straightforward maintenance scheduling. • Temperature and time settings for booth ventilation (solvent flash-off), intermediate drying, and final drying can be easily adjusted to required values on the digital display of the electronic control panel. • Users can monitor and adjust the drying time using the heating thermostat and time relay.

Condition: used, Year of construction: 1982, functionality: fully functional, machine/vehicle number: 093185, We offer a drum-type shot blasting machine with a steel belt. Steel belt width – 1800 mm Machine year of manufacture – 1982 Filtration unit capacity – 15,000 m³/hour Isdpfxoz Nqduj Ag Aetn Filter motor – 30 kW Filter year of manufacture – 2017.

Condition: good (used), functionality: fully functional, total width: 2,800 mm, total height: 3,000 mm, type of input current: three-phase, input voltage: 400 V, overall weight: 3,600 kg, empty load weight: 3,600 kg, Equipment: documentation/manual, BERGMANN Roller Compactor, Roll Packer JRP 7700 - Wood and Pallet Compactor Description For sale is a robust BERGMANN Jumbo Roll Packer for shredding and compacting wood pallets and bulky wood waste, paper, and waste in open containers. The machine comes from an industrial group and was only used sporadically there. The heavy, profiled compaction roller breaks up the fed material and compacts it directly in the container. This allows for better utilization of the available container volume and reduces the number of required collections. Ideal for industrial and commercial companies, logistics companies, wood processing companies, and waste disposal companies. Condition Good, ready-to-use, and fully functional condition with typical signs of wear. Only sporadic use by the previous operator. Technical Data and Equipment Manufacturer: BERGMANN Designation: Jumbo Roll Packer Type according to operating manual: JRP 7700-42 Design: Stationary container compactor Drive: Electro-hydraulic Compaction: Profiled steel roller on the articulated arm Previous use: Wood pallets and wood waste Equipment: Hydraulic unit, control unit, and protective grating Available Documents • Documentation and operating manual • Spare parts list Itodpfx Aez S N Svjg Aen • Electrical wiring diagrams • Hydraulic diagrams Price: €14,900 net, negotiable, plus statutory VAT. Transport/shipping costs, collection. Freight transport by separate agreement; transport costs are not included in the purchase price.

Condition: used, Year of construction: 2017, operating hours: 494 h, Hamm HD8VV roller, manufactured in 2017, with only 494 operating hours! ----* Manufacturer: Hamm * Type: HD8VV * Year of manufacture: 2017 * Recorded operating hours: 494 * Kubota diesel engine * Operating weight: 1,580 kg * Power: 14.8 kW * Water spray system * First owner * Good condition * Working width: 80 cm * Transport length: approx. 2,295 m * Transport width: approx. 0.938 m * Transport height: approx. 1.58 m * Video available upon request (WhatsApp Erik) * Price: 10,900 euros, net + 19% VAT Itjdpsz Ta Hyefx Ag Aen ----For further questions, please call: Erik Kortum: WhatsApp All information without guarantee, errors and prior sale excepted.

Year of construction: 2019, condition: good (used), Sturm Coating Coating System For sale is a complete industrial Sturm robotic painting system from 2019. The automated coating system was used for series production coating of components and comes from an industrial production facility. The used painting line consists of, among other things, a painting booth, drying and cooling zones, conveying technology, and several KUKA and Yaskawa industrial robots. The system is complemented by a thermal exhaust gas cleaning system. Due to the automated system design, the robotic painting system is particularly suitable for industrial applications in the automotive industry, metal processing, and series production. Iedpfxszka Sfj Ag Ajtn Technical Data & Scope of Supply: Manufacturer: Sturm (system) / KUKA & Yaskawa (robots) Year of construction main system: 2019 Previous operation: 3-shift operation (condition corresponds to age) System components: Units, drying and cooling zone, painting booth, loading and unloading station Included robots / peripherals: Several spare KUKA robots (models KR 210L 150-2 / KR 210 2, years of construction 2006–2012) Associated robot control cabinets 2x Yaskawa robots EPX 2900 1x Thermal post-treatment / exhaust gas cleaning system (VeniaKab / RNV) Condition notes: Control technology: According to the factory maintenance department, it is state-of-the-art. Electrical & mechanical: Mostly in a condition appropriate to its age or good condition. Cyber security data deletion: For security reasons, all hard drives of the robots and PC-based stations have been removed. "Everything from one source: We would be happy to offer you suitable bank financing for your project." You can find more new and used items in our shop! International shipping costs on request!

Condition: good (used), machine/vehicle number: YA9SBAT390N129002, axle configuration: 3 axles, first registration: 01/1993, suspension: air, tire condition: 50 %, color: other, = Additional options and accessories = - air suspension - Drum brakes = More information = Year of construction: 1993 Iodowu Atcjpfx Ag Ajtn Tyre profile: 50% Brakes: drum brakes Suspension: air suspension Tipper: Back Technical condition: good Visual appearance: good

Condition: ready for operation (used), Year of construction: 2008, functionality: fully functional, FOR SALE: COMPLETE UV PAINTING LINE – SORBINI / CEFLA / BARGSTEDT Individual machines can also be purchased! For sale: a complete, industrial UV painting line designed for finishing flat surfaces, furniture components, MDF, HDF boards, panels, and other wood-based materials. The line is equipped with automatic loading and unloading systems, wide-belt sanders, dust extraction systems, multiple coating stations, UV drying tunnels, and a UV printer. Main equipment of the line: • Automatic loading and unloading systems BARGSTEDT • Pallet storage systems BARGSTEDT • Wide-belt sander BUTFERING OPTIMAT SCR 413/RREE with HEESEMANN EA2 dust extraction • Wide-belt sander BUTFERING OPTIMAT SCR 213/EE • Brush sanding machine SORBINI SMART SAND 1 • Numerous CEFLA conveyors • Roller coating machines: SORBINI KOMPACT SYSTEM SORBINI SMARTCOATER SP1 (several units) SORBINI SMARTCOATER MF (several units) • CEFLA drying tunnels: hot air tunnels IR tunnels UV tunnels (UV 2000 M2, UV 2000 M3) • SORBINI T/20-3-STP UV printing line (3-head) The line enables the execution of a complete technological process: sanding, dust extraction, application of primers and paints, UV curing, UV printing, and final surface finishing. This is an ideal solution for manufacturers of furniture, furniture fronts, decorative panels, and carpentry elements. Machines from renowned manufacturers: SORBINI, CEFLA, BARGSTEDT, BUTFERING, HEESEMANN. Sale of the complete line. Viewing is possible by prior appointment. Detailed technical specifications available upon request. Itjdpfszg Epuox Ag Aon

Condition: used, Year of construction: 2022, functionality: fully functional, total length: 14,000 mm, total width: 2,500 mm, total height: 2,500 mm, overall weight: 5,000 kg, year of last overhaul: 2026, Equipment: documentation/manual, MAGNUM LABORA ROTARY DRYER + 750 kW FURNACE – CAPACITY up to 1 t/h For sale: a complete Magnum rotary dryer from Labora, along with a 750 kW furnace, designed for drying sawdust and biomass. Dryer capacity: up to 1 t/h of dry material, depending on the moisture content of the input material and the required final moisture content. The dryer is complete, installed, and operational. It is possible to view the equipment in operation on November 15th. After this date, it will be dismantled due to the installation of a larger dryer. The installation includes, among other things: - Magnum Labora rotary dryer, - 750 kW furnace, - raw material feeding and shredding system, - fan and exhaust and chimney system, - dust collection and steam extraction system, hot air discharge system, spraying system, - automation system with control cabinet, - temperature measurement and process monitoring, CO detection Iodoz Iq Rkspfx Ag Aetn The installation is used for drying wood sawdust for pellet production. Sale includes the complete set, including the furnace and the raw material shredding mill. I can send a video of the equipment in operation via WhatsApp. Price: 350,000 PLN net Location: West Pomeranian Voivodeship

Condition: good (used), functionality: fully functional, power: 70 kW (95.17 HP), fuel type: diesel, color: white, empty load weight: 13,400 kg, Year of construction: 1999, operating hours: 7,540 h, Equipment: cabin, Cat CB-535B roller, year 1999 with 7,540 operating hours, weight 13,400 kg, immediately ready for use, transport and delivery possible, we also prepare customs/export documents, inspection by appointment also possible on weekends. Itedpfxsyuzpno Ag Asn

Condition: used, axle configuration: 3 axles, first registration: 10/2026, color: other, Year of construction: 1985, Carrying capacity: 22.850 kg HEAVY DUTY AANHANGWAGEN VERY NICE .BRAKE AXLES FRONT AXLE NOT GOOD. Ijdpfxjz Ip Alo Ag Ajtn

Condition: used, Description Itsdsz T A Duspfx Ag Ajn Discover the RAMBO-HC10DUO, the latest innovation for efficient garden maintenance and wood processing. This powerful wood chipper features two large hoppers and a suction hose, enabling effortless shredding of branches up to a diameter of 100 mm. The user-friendly operation is supported by the generously sized feed hoppers, which ensure quick filling. Thanks to the integrated chassis with studded pneumatic tires, even rough terrain can be easily navigated. The reinforced duplex blade drum significantly increases the infeed force, allowing even stubborn material to be processed effortlessly. In addition, the RAMBO-HC10DUO offers an adjustable discharge chute and a discharge flap, enabling flexible handling. For easy cleaning of the blade drum, both the feed hopper and the discharge hopper can be folded to the side. Furthermore, the wood chipper is equipped with a practical protective cover and an operating hour meter. The special flail blades ensure that not only branches but also leaves are effectively shredded – even the material sucked in through the suction hose is processed optimally. The RAMBO-HC10DUO is the ideal choice for both hobby gardeners and professional landscapers! Features - Newly developed with 2 hoppers and a suction hose. - The RAMBO-HC10DUO effortlessly shreds branches up to a thickness of Ø 100 mm. - User-friendly operation thanks to large feed hoppers. - Integrated chassis with studded pneumatic tires for quick and easy relocation, even on rough terrain. - The reinforced, professional duplex blade drum significantly increases the infeed force, allowing the RAMBO-HC10DUO to process more stubborn material. - Adjustable discharge chute and discharge flap. - Feed hopper & discharge hopper can be folded to the side for cleaning the blade drum. - With protective cover and operating hour meter. - Flail blades for processing / shredding leaves, as well as the material sucked in through the suction hose.

Condition: used, Year of construction: 2017, operating hours: 1,004 h, Hamm HD8VV roller, manufactured in 2017, with only 1,004 operating hours! ---- * Manufacturer: Hamm * Type: HD12VV * Year of manufacture: 2017 * Operating hours: 1,004 * Kubota diesel engine * Operating weight: 2,695 kg * Power: 22.9 kW * Water sprinkling system * First owner * Good condition * Working width: 1.2 meters * Video available upon request (WhatsApp Erik) * Price: 12,900 euros, net + 19% VAT Isdpfx Agsz R Hzrs Aotn ---- For further questions, please call: Erik Kortum: WhatsApp All information is without guarantee, errors and prior sale excepted.

Condition: used, axle configuration: 1 axle, first registration: 10/2026, color: other, Year of construction: 1997, Empty weight: 4.740 kg Axle 1: left 12 mm right 12 mm Axle 2: left mm right mm Axle 3: left mm right mm Ijdpfoz H Ul Ajx Ag Aetn

Condition: excellent (used), A robust industrial machine of German manufacture, Walther Trowal, model DLT 4, year 1980. This device is designed for surface treatment of metal, aluminum, or plastic parts – the trowalizing process (deburring, edge rounding, polishing, cleaning). A classic drum design – reliable, massive, and durable, typical of “West Germany” production. Technical data: • Model: DLT 4 • Manufacturer: Carl Kurt Walther GmbH & Co. KG, Wuppertal-Vohwinkel (West Germany) • Year of manufacture: 1980 • Drive type: ZOD71N 10 • Motor power: 0.38 kW • Power supply: 380 V / 50 Hz • Rotational speed: 31 / 61 rpm • Range: 3.5 – 7 rpm • Drum diameter: Ø 70 cm • Working length: approx. 80 cm • Net weight: 825 kg Condition description: • The machine is complete, and the drum rotates smoothly and evenly. • Perforation and interior are in good condition. • No signs of cracks or structural damage. • Requires electrical connection and possibly a service inspection. • Ideal for a tool shop, machining facility, or production line. Applications: • Deburring and cleaning parts after machining. • Polishing metal or aluminum components. • Processing screws, bushings, stamped parts, castings, and precision parts. Condition: used, solid, classic Walther Trowal design – requires minor refurbishment or is ready for immediate use. Iedpfx Agoz Slhue Aetn

Condition: used, Coat with stand-up collar, size 56, silver, JUTEC · Certified according to DIN EN ISO 11612:2015 · Approximately 1200 mm long, with Velcro closure. Base fabric: aluminized aramid, high resistance to creasing, high level of comfort. · Provides short-term protection against sparks and flames. Application: in foundries and in the steel, aluminum, ceramics, and glass industries. · Other technical properties: Category: III Itjdsz Th I Sspfx Ag Aon · Standard: DIN EN ISO 11612

Condition: used, Coat with stand-up collar, size 58, silver, JUTEC · Certified according to DIN EN ISO 11612:2015 · Approximately 1200 mm long, with Velcro closure. Base fabric: aluminized aramid, high resistance to creasing, high level of comfort · Provides short-term protection against sparks and flame exposure. Application: in foundries and the steel, aluminum, ceramics, and glass industries. · Other technical properties: Category: III Itjdjz Trd Dopfx Ag Aen · Standard: DIN EN ISO 11612

Condition: used, Description The RAMBO-HC10E is the ideal tool for efficient garden maintenance. With its ability to effortlessly shred branches up to a diameter of 50 mm, it easily handles even demanding tasks. The large feed hopper ensures comfortable operation, while the integrated chassis allows for quick and easy movement of the device. The professional duplex blade drum offers enormous pulling power and processes even stubborn material, so you can rely on outstanding results. In addition, the exceptionally smooth-running 230V electric motor guarantees low noise emission, making it a perfect choice for residential areas. The RAMBO-HC10E also comes with a protective cover to ensure safety during operation. Features Itodpfx Ajz Ugwnjg Ajn - The RAMBO-HC10E effortlessly shreds branches up to a diameter of 50 mm. - Comfortable operation thanks to a large feed hopper - Integrated chassis for quick and easy movement - The professional duplex blade drum with enormous pulling power processes even stubborn material. - Exceptionally smooth-running 230V electric motor with low noise emission. - Includes protective cover.

Condition: used, Coat with stand-up collar, size 54, silver, JUTEC · Certified according to DIN EN ISO 11612:2015 Itjdez Uvcajpfx Ag Ajn · Approx. 1200 mm long, with Velcro closure, base fabric: aluminized aramid, high resistance to creasing, high level of comfort · Short-term protection against sparks and flames. Application: in foundries and the steel, aluminum, ceramics and glass industries · Further technical properties: Category: III · Standard: DIN EN ISO 11612

Condition: used, Coat with stand-up collar, size 52, silver, JUTEC · Certified according to DIN EN ISO 11612:2015 Iedpfx Agoz Uhuzs Aetn · Approx. 1200 mm long, with Velcro closure, base fabric made of aluminized aramid, high resistance to creasing, high level of comfort · Provides short-term protection against sparks and flames. Application: in foundries and the steel, aluminum, ceramics, and glass industries. · Other technical characteristics: Category: III · Standard: DIN EN ISO 11612

Year of construction: 2020, condition: used, Offered for sale is a manual powder coating booth with a cartridge filter system. Technical data: Usable volume: 9.5m³, airflow rate: 12000m³/h, downward air velocity: 0.25-0.3m/s, total filter area: 160m², maximum powder melting point: 220°C, maximum dimensions X/Y/Z: 2200mm/200mm/2000mm. Control system: Integrated spray gun and control unit for manual powder coating. Equipment: Booth, platform, filter system, eight cartridges. Operation: 2020/2021 two-shift operation, subsequently approx. 30% daily utilization. System documentation available. Inspection possible by arrangement. Itsdoz Rn Dnjpfx Ag Aen

Condition: used, Drum pump, electric, PP, for acids, immersion depth 1000 mm · For filling and transferring liquids from drums and containers (ATEX-protected and non-ATEX-protected) Itsdpez Uix Isfx Ag Asn · For the safe handling of environmentally hazardous and corrosive media as well as flammable and explosive liquids.

Condition: used, Drum pump set, suitable for use with solvents, immersion depth 1000 mm Iedpfx Ajz U Iydog Ajtn · For filling and transferring drum and container contents (explosion-proof and non-explosion-proof) · For the safe handling of environmentally hazardous and corrosive media, as well as flammable and explosive materials.