Used Comac C85 for sale (85)

Condition: reconditioned (used), functionality: fully functional, power: 13.7 kW (18.63 HP), operation weight: 1,810 kg, Year of construction: 2023, operating hours: 200 h, Equipment: UVV, additional headlights, cabin, hammer hydraulics, hydraulics, rubber tracks, Operating weight with cab and rubber tracks 1,900 kg, Yanmar Stage V diesel engine, 3TNV76, 13.7kW/18.6hp, water-cooled, dozer blade, extendable undercarriage 990 - 1,300 mm, rubber tracks, Cab ROPS/TOPS/FOPS level 1, with adjustable seat, Locking device during entry and exit, Hydraulic system, open circuit with variable displacement pump, Hydraulic servo control ISO, Transmission system with two speeds, Rsdpfx Astrm Eysnkocd 4 anchorage points for transportation, Additional equipment: with Powertilt and LED headlights

Condition: ready for operation (used), Blade length: 130 x 130 mm Redpsznh Ivefx Ankscd Cutting length: 130 mm Max. cutting capacity at 45/70 kg strength: 3/2 mm Cutting angle: 90° Stroke rate: 50/min Table dimensions: 460 x 600 mm Space required: 650 x 600 x 1250 mm Weight, approx.: 170 kg

Condition: good (used), functionality: fully functional, Diameter range: 52 mm - 99 mm Rcjdpfx Anjwxtybskjd Height range: Production capacity: up to 500 units per minute Number of heads: 6 Tooling available for approx.: 73 mm (others on request)

Condition: good (used), functionality: fully functional, Diameter range: 99 mm - 180 mm Height range: 90 mm - 250 mm Heads: 3 Production capacity: up to 90 cans per minute Redpfx Anst Dhv Sekecd Tooling for approx.: 153 mm

Condition: like new (used), power: 15.5 kW (21.07 HP), operation weight: 2,540 kg, Year of construction: 2023, operating hours: 605 h, Equipment: additional headlights, adjustable boom, cabin, gripper hydraulics, hammer hydraulics, hydraulics, Operating weight: 2,540 kg, Yanmar Stage V - Tier 4 Final diesel engine, 15.5 kW/21.1 hp - 1105cc, water-cooled, Hydr. system open center, hydraulic variable displacement pump, dozer blade, tiltable cab ROPS/TOPS/FOPS with heating, fan, loudspeaker, radio preparation and rear view mirrors right and left, Joysticks with electro-hydraulic and proportional commands for, tilt, Main control circuit AUX1: single/double action, double driving speed with "AUTO TWO SPEED", Dipper arm: 1,350 mm, W/H: 2,725 mm / 2,527 mm, Excavation depth: 2,725 mm, Butterfly brackets on the stick, rotating beacon, AUX 2 hydr. pre-equipment with low throughput, control with potentiometer on left control lever (deactivates swivel) with Powertilt PT03, Swivel angle 180° (2x90°) Lehnhoff HS03 hydraulic quick coupler, Load hook on Powertilt in AR right without backhoe bucket and ditching bucket Rodpfx Anetrmudjkscd

Condition: used, Notching Machine COMACA type N/EPAS Maxi Sheet thickness: 3 mm Table size: Length 1050 mm x Depth 700 mm Ends tables dimensions: 900 x 470 mm Throat depth: 110 mm Orientable stop Blade length: 225 x 225 mm Voltage: 380 V Total length with ends tables: 2900 mm Rcedpfx Ajzku D Nsnkod Length: 1200 mm (with retreated ends tables) Depth: 800 mm Total height: 1100 mm Weight: approx 1 T

Condition: excellent (used), functionality: fully functional, Year of construction: 1993, working width: 250 mm, sheet thickness (max.): 6 mm, sheet thickness stainless steel (max.): 4 mm, table width: 250 mm, COMACA BEVELING MACHINE MODEL: VAR 250 WITH VARIABLE ANGLE Work table dimensions: 1200 x 900 mm Blade length: 250 x 250 mm Maximum cutting thickness R42/mm²: 6 mm Maximum cutting thickness R60/mm²: 4 mm USED MACHINE INTERNAL CODE: SVR 423 Rcodpfszkg Hiox Anked

Condition: used, Year of construction: 2021, functionality: fully functional, year of last overhaul: 2025, Equipment: documentation/manual, For sale is a complete, industrially-used filling, capping, labeling, and banding line for the automated processing of cylindrical cans, including compressed air supply. The line components are technically synchronized, were in use in real production, and are suitable for immediate production startup. Application Range: - Cylindrical PET cans, reference format 75 ml – 400 ml. - Suitable for tobacco, shisha tobacco, food products, cosmetics, and other non-food products. - Multi-format capable (format-dependent adjustments possible) Line Configuration / Main Components: Feeding: - 2× format-adjustable rotary tables - Rotary table 1 for feeding empty cans - Rotary table 2 for feeding lids Dosing & Filling: - REX vacuum filler RVF 327, year 2017 - Precise product dosing - Fillpack filling and capping machine R01-TI, year 2022 - Filling cans - Placement of sealing foil - Sealing foil welded on for tamper-evidence - Placing and screwing on lids Labeling: - CDA NINON labeling machine, year 2021 - Lid labeling - Wrap-around/side labeling - Transfer via conveyor belt Checkweigher: - Garvens S2 conveyor checkweigher, year 2002 - Inline weight control - Automatic rejection of out-of-spec products Banding / Tax Stamp: - ECOMA can banderoler, year 2022 - Application of tax or security bands - CE compliant - Output up to approx. 35 cans/min (format-dependent) Compressed Air Supply (included): - COMPRAG screw compressor ARD-1510, year 2022 - 15 kW, max. 10 bar, 1.9 m³/min - COMPRAG air receiver RH-500, 500 L - Including refrigerant dryer - System acquired new in 2022, optimally matched to the line Auxiliary Unit: - Tumbler / mixer - Vacuum function defective - Mechanical mixing function operative - Offered as an auxiliary unit without warranty Technical Summary: - Degree of automation: high / fully-automatic - Tamper-evident seal: welded sealing foil - Quality assurance: inline checkweigher - CE marking: available - Manufacturing years overall: 2002–2022 Condition: - Used, functional, from ongoing production Scope of Delivery: - Complete production line as described - Conveyor systems between modules - Format parts for 75 ml cans - Controls and switch cabinets - Compressed air system Rsdpsx Hzzpjfx Ankjcd Inspection: Inspection by appointment expressly possible.

Condition: excellent (used), Year of construction: 2018, functionality: fully functional, machine/vehicle number: 364, Ice cream cones making machine, make COMACO Alimentare, model UNIRUS UR2, MFG: 2018, SN: 364, amperage 25A; power supply 380V, the consumption is 9 Kw, frequency: 50/60 Hz; the machine has a mould with 2 rows, with 7 cavities in each row, the total amount of rows in the mould are 14. The max diameter of the cone measured in mm is 80. The production average productivity with cycle of 2 minutes and temperature of 45 C⁰ is 420 cones. The production average productivity with cycle of 1 minutes and temperature of 45 C⁰ is 480 cones. Semi-automatic machine with inter changeable molds for making ice cream cones. The machine make’s cups and double cones of various size and capacities. The mould is opening and closed by hand. The moulds are field through a special feed device. Heating is made be electric supply 380V. The cones are automatically ejected into a container at the bottom of the machine when the lower mould is operated. Temperature control is automatic: the machine maintain the preset temperature until as signal (visual and audible) indicates the end of the cooking time. Price: 11.400 Euro + VAT, negotiable; Incoterms condition 2025, FCA, Oradea/Romania Irrtum, Anderungen und Zwischenverkauf vorbehalten/Subject to errors, changes and prior sale/ Rcedpfox Dzifox Ankod

Condition: good (used), Year of construction: 1986, functionality: unexamined, total height: 2,800 mm, total width: 3,100 mm, total length: 2,450 mm, type of input current: three-phase, overall weight: 2,000 kg, input voltage: 400 V, power: 1.5 kW (2.04 HP), empty bottle cleaner model Gripstar 32 station now equipped for 0.3 and 0.5 ltr PET bottle Siemens controlled Rcjdsxn Ii Hopfx Anked generally good condition

Condition: used, Year of construction: 1999, Used Bottle Rinser PROCOMAC Gripstar up to 6000 bph This Used Rinser  not only delivers high efficiency but also ensures excellent performance for bottle rinsing. Procomac manufactured this system in 1999, and designed it to operate at a maximum speed of 6000 bottles per hour (BPH). As a result, this setup guarantees optimal performance in production lines. The rinser handles bottle formats ranging from 0.20 to 1.5 liters, providing versatility and adaptability in different production settings. Furthermore, its robust construction adds to its overall efficiency. Technical Features of the Rinsing Machine PROCOMAC Gripstar The Gripstar rinser features 32 grippers that operate in a clockwise rotation. Consequently, this design stabilizes the bottles during the rinsing process and reduces the risk of damage or malfunction. In addition, the system incorporates fixed nozzles, which simplify maintenance and minimize wear over time. Moreover, this technical setup improves the longevity of the machine, making it a reliable choice for high-speed operations. Types of Treatment and Configuration The machine supports a single treatment cycle, allowing it to perform rinsing using either water or air. This is important because it makes the Used Bottle Rinser PROCOMAC Gripstar up to 6000 bph suitable for a wide range of products, from food-grade liquids to cosmetics. Additionally, its modular configuration enables seamless integration into existing production lines without requiring significant structural changes. Thus, it offers flexibility in various production environments. Therefore, manufacturers can easily adopt it even in complex setups. Rcsdpfxjvgvipj Anksd Operating Conditions and Current Status The Used Bottle Rinser PROCOMAC Gripstar up to 6000 bph remains stored in excellent condition, ensuring it is fully operational once installed. Despite the fact that the machine dates back to 1999, proper storage has preserved its functionality. Because of its durable design, it will continue to deliver reliable performance for years. Moreover, the use of standard components simplifies maintenance and part replacement, which helps reduce downtime as well as operating costs. In other words, the machine is built to last and operate efficiently under various conditions. Electrical Data and Energy Consumption This machine runs on 415 volts, consuming 3.1 kW of power at a frequency of 50 Hz. The machine draws 5.4 amps, ensuring energy efficiency compared to similar models. Thus, these specifications make the system compatible with most industrial electrical infrastructures. As a result, the machine ensures smooth installation while minimizing energy costs. In addition to its energy-saving features, the machine supports a sustainable production process. Conclusion of the Rinsing Machine PROCOMAC Gripstar In summary, the Used Bottle Rinser PROCOMAC Gripstar up to 6000 bph offers reliability and speed, making it an excellent choice for bottling lines.

Condition: reconditioned (used), functionality: fully functional, fuel type: diesel, operation weight: 4,200 kg, Year of construction: 2021, operating hours: 1,150 h, Equipment: UVV, air conditioning, cabin, gripper hydraulics, hammer hydraulics, hydraulics, rubber tracks, Operating weight: 4,200 kg, Kubota D1803-CR-T Turbo Stage V - Tier 4 Final diesel engine, 32.8 kW/46 hp, water-cooled, Swivel arm and monobloc boom, zero tail, LOAD SENSING hydraulic flow sharing control block and electronically controlled load sensing pump with ECO - Standard - Power working mode, automatic speed reduction, dozer blade, rubber tracks, foldable, cushioned cab ROPS/TOPS/FOPS level 1 with heating and radio preparation, Digging depth: 3,085 mm, Powertilt PT05 Additional equipment: Air conditioning, load holding valve on blade, rear camera, Plexiglas canopy, LEDs at the front, rear and on the boom, rotating beacon, Redpfx Anstt Dh Dokjcd Potentiometer on AUX1, electrical switching, Powertilt

Condition: reconditioned (used), Year of construction: 2023, operating hours: 485 h, Operating weight with cab and rubber tracks 1,900 kg, Yanmar Stage V diesel engine, 3TNV76, 13.7kW/18.6hp, water-cooled, dozer blade, extendable undercarriage 990 - 1,300 mm, rubber tracks, Cab ROPS/TOPS/FOPS level 1, with adjustable seat, Locking device during entry and exit, Rcjdpfx Anjtz A A Uekjd Hydraulic system, open circuit with variable displacement pump, Hydraulic servo control ISO, Transmission system with two speeds, 4 anchorage points for transportation, Additional equipment: with Powertilt, LED headlights and grapple hydraulics

Condition: used, Year of construction: 1986, plate thickness 6,0 mm Rcedeg Ip Efjpfx Ankod pressure 18 t cutting angle - upper blade 90 ° blade length 225 x 225 mm voltage 380 V total power requirement 5,5 kW weight of the machine ca. 650 kg dimensions of the machine ca. 1,10 x 0,80 x 1,05 m - Angular stops adjustable

Condition: used, Year of construction: 2000, Complete palletizing system, manufactured by Procomac, for 12 x 1.0 PET Cycle module boxes and shrink packs, year of manufacture 2000, with Fanuc robot, 1 palletizing head for module boxes, 1 palletizing head for shrink packs, pallet magazine, pallet transport system, required installation area approximately 150 m². Rcsdpfjlu H N Sox Anksd

Year of construction: 2016, condition: ready for operation (used), Mini excavator EUROCOMACH ES 18 ZT Year of manufacture: 2016 According to the hour meter: 2,186 operating hours 1,750 kg 11.2 kW * Quick coupler MS 01 * Hydraulic ditching bucket * Deep digging bucket * Hydraulic adjustable undercarriage * Cabin with heating * Work lights Rcodpfshq A Rgox Ankod * Original paint * Good tracks Selling price: €17,950.00 net Affordable delivery also possible!

Condition: used, Year of construction: 2016, operating hours: 6,760 h, 2016 | Eurocomach Es 85 Zt with 3 buckets | Used Midi Excavator 7t - 12t | 6760 hours 📍Location: France 🚛 Delivery available to your destination – Use our shipping calculator to estimate transport costs! 💰 Buy Now for EUR 37000 or Make an Offer. Payment at delivery available for an affordable fee (subject to approval)* Rjdpfx Aoyc N R Asnkecd 👷‍♂️ Inspected by an independent expert 70 inspection points 64 approved ✅ 6 imperfect ℹ️ 0 issues ⚠️ 📌 Inspector's Comment: Good general condition of the hydraulic excavator, a leak on the boom cylinder needs to be reported, the belt of the left track is heavily worn. Alarm 90 is reported on the dashboard. 📄 Want to see the full inspection, extra photos, or a video? Tip: The reference "39701 Equippo" is commonly used when looking up more details online. 💡 Why this machine and our service stands out: ✔ Thorough inspection by professionals ✔ Jobsite delivery available ✔ Money-Back Guaranteed ✔ Secure and flexible payment options 🔄 Considering other equipment options? We offer helpful tools and resources for all equipment owners and operators – easily accessible on our platform.

Condition: used, Year of construction: 2000, plate thickness 3 mm blade length 225 x 225 mm cutting angle 90 ° throat 110 mm strokes per minute 45 total power requirement 2,5 kW weight of the machine ca. 0,9 t Rcodpfjxyacpox Ankod dimensions of the machine ca. 1 x 1 x 1,2 m

Condition: good (used), Year of construction: 2007, functionality: fully functional, Model Year: 2007 Width: 1100 mm Length: 410 mm Rodpfex Tt I Usx Ankecd Height: 640 mm Number of Axes: 3 Tool Holder: BT50 Spindle Speed (rpm): 6,100 Processable Material Types: Steel, Aluminum, Titanium, Graphite, Copper, Invar, Composite, Delrin, Peek

Condition: good (used), Year of construction: 2007, functionality: fully functional, rotational speed (min.): 3,000 rpm, feed length Z-axis: 500 mm, fuel type: electric, fuel: electricity, throat depth: 500 mm, Chuck Diameter: 12" Spindle Bore: 500 mm Redpfx Asx Nnryenkjcd Machinable Materials: Steel, Aluminum, Titanium, Graphite, Copper, Invar, Composite, Delrin, PEEK

Condition: ready for operation (used), Year of construction: 1994, functionality: fully functional, travel distance X-axis: 565 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 415 mm, workpiece weight (max.): 1,000 kg, table width: 600 mm, TECHNICAL DETAILS Working Head Travel range X-axis: 565 mm Travel range Y-axis: 400 mm Travel range Z-axis: 415 mm Resolution X, Y, and Z axis: 0.001 mm Resolution C axis: 0.001° Rapid traverse speed: 800 mm/min Electrode weight without rotation max.: 100 kg Electrode weight with rotation max.: 15 kg Work Table Table length: 840 mm Table width: 600 mm Dielectric fluid level above table: 360 mm Workpiece weight max.: 1,000 kg Number of T-slots: 4 T-slot width: 10 mm Distance table – quill without chuck: 180–595 mm Distance table – quill optional: 245–660 mm Dielectric Fluid Supply Capacity: 400 l Number of paper filter cartridges: 4 MACHINE DETAILS Control: CNC Generator Rcjdpfjzqct Sjx Anked Rated current: 60–120 A Connected load: 15–23 kVA Dimensions & Weight Machine dimensions (L x W x H): 2,760 mm × 1,110 mm × 1,840 mm Machine weight: approx. 2,750 kg Generator dimensions (L x W x H): 1,800 mm × 600 mm × 920 mm Generator weight: 300 kg EQUIPMENT Controlled C-axis 16-position tool changer

Condition: ready for operation (used), Year of construction: 2015, operating hours: 500 h, travel distance X-axis: 2,050 mm, travel distance Y-axis: 850 mm, travel distance Z-axis: 750 mm, table load: 2,500 kg, overall weight: 20,500 kg, spindle speed (max.): 6,000 rpm, spindle motor power: 18,500 W, number of slots in tool magazine: 36, number of axes: 3, This 3-axis Okuma Millac 852 VII was manufactured in 2015. It features a robust table size of 2,200 × 850 mm and a maximum table load of 2,500 kg. The machine is equipped with a high-torque spindle motor of 18.5 kW and a rapid traverse of 20,000 mm/min. If you are looking to get high-quality machining capabilities, consider the Okuma Millac 852 VII vertical machining centre we have for sale. Contact us for further details. • Condition: Excellent; approximately 500 cutting hours; near-new condition • Heavy-duty machining center for high material removal rates • Extremely rigid machine structure • Box guideways on all axes; quadruple box guideway system on Y-axis • Automatic oil lubrication for guideways with machine stop monitoring • Okuma OSP300 control with IGF conversational programming • Parameterized automatic tool collision prevention system • Automatic cutting force, tool load, and spindle torque monitoring • Tool life management and tool usage monitoring • Communication interfaces: USB, PCMCIA, RS-232 • Cutting force: 580 Nm • Chip removal capacity: 540 cm³/min • Spindle speed: 6,000 rpm • Spindle oil cooler • Table size: 2,200 × 850 mm • Rapid traverse: 20,000 mm/min • Tool change time: 0.5 s; chip-to-chip time: 5 s • Machine currently under production; can be inspected under power by an official Okuma technician • Includes documentation: spare parts list, electrical diagrams, programming manual, operation manual • Delivery: Immediate, subject to prior sale Additional equipment Redpfx Anjzqcr Iokscd • Renishaw tool measuring system • Independent Knoll high-pressure coolant system (70 bar) • 30-micron coolant filtration system • LTA mist extraction system • Rear hinge-type chip conveyor • Large set of BT50 tool holders • Transformer Technical Specification Taper Size BT 50

Condition: like new (used), Year of construction: 2015, travel distance X-axis: 850 mm, travel distance Y-axis: 520 mm, travel distance Z-axis: 475 mm, rapid traverse X-axis: 42 m/min, feed rate X-axis: 42 m/min, controller manufacturer: Heidenhain, controller model: TNC 640, workpiece height (max.): 800 mm, workpiece weight (max.): 1,000 kg, total height: 2,700 mm, total length: 3,600 mm, total width: 2,300 mm, table width: 1,100 mm, table height: 570 mm, overall weight: 5,750 kg, spindle speed (min.): 14,000 rpm, spindle motor power: 15 W, Equipment: chip conveyor, Year of manufacture: 2015 CNC controller: Heidenhain TNC 640 Axes X-axis travel mm: 850 Y-axis travel mm: 520 Z-axis travel mm: 475 Feed rates m/min: 42 Rapid traverse m/min: 42 Acceleration in the axes m/s2: 5 Worktable Table dimensions mm: 1100x570 Maximum workpiece size (D x H) mm: H=800mm Max. workpiece weight kg: 1000 Spindle Spindle speed rpm: 14000 Spindle drive power kW: 20.3/14.5 (40/100%ED) Cooling Cooling through the Spindle Center: 20 Tank capacity: 600 Tool system Tool holder: SK 40 Tool magazine slots: 20 With free neighboring places mm: 130 With occupied neighboring places mm: 80 Max. Tool Length mm: 300 Chip-to-chip time s: 5.7 Equipment Electronic Handwheel Chip conveyor Infrared probe Internal cooling lubricant supply Rinsing gun Operating mode 4 Air blowing through spindle center selectable via M-function Direct measuring system XYZ Paper band filter Machine running times Under power: --- Spindle Working: ----- Rated power kVA: 19 Rcedpfxjznniaj Anksd Basic machine dimensions / weight Length mm: 3600 Width mm: 2300 Height mm: 2700 Weight kg: 5750

Condition: excellent (used), Year of construction: 1994, functionality: fully functional, MACHINE Dimensions (height x width x depth): 2760 x 1110 x 1840 mm Weight: 2750 kg WORK TABLE Table size: 840 x 600 mm Dielectric above table: 360 mm Maximum workpiece weight: 1000 kg T-slots: 4 x 10 mm Distance between table and quill without chuck (max/min): 595/180 mm Rodpfx Ajwbalvjnkjcd WORKING HEAD Travel range X - Y: 565 x 400 mm Travel range Z: 415 mm Resolution X - Y - Z: 0.001 mm C-axis resolution: 0.001° Rapid traverse speed: 800 mm/min Max. electrode weight without rotation: 100 kg Max. electrode weight with rotation: 15 kg DIELECTRIC SUPPLY Tank volume: 400 liters Paper candle filters: 4 pieces GENERATOR Dimensions (height x width x depth): 1800 x 600 x 920 mm Weight: 300 kg Nominal current: 60 – 120 A Connected load: 15 – 23 kVA

Condition: good (used), Year of construction: 2000, Machine is with SK 30 20.000 rpm Parts shown by hand not come. Rodpfx Ansznmqijkscd