Used Comaco Agm3 Can Seamer for sale (26,533)

Condition: used, Year of construction: 2025, Overview Prodsz Dv Uyepfx Anyeb New complete filling and packaging line for beer and carbonated soft drinks in aluminium cans, with an output of 6,000 cans/h at 500 ml and 8,000 cans/h at 330 ml. The line runs from the depalletizer through can rinsing, filling and seaming, tunnel pasteurization, inspection and drying to sleeve labelling, tray shrink wrapping, ABB robot palletizing and pallet stretch wrapping. Two-floor layout: depalletizing on the upper floor, a clamping conveyor lowers the cans to the ground floor for all following machines. All machines are built by Ningbo Cixi except the ABB robot. Technical data - Year of manufacture: 2025 - Capacity: 6,000 cans/h at 500 ml Standard, 8,000 cans/h at 330 ml Standard - Can formats: 330 ml Standard (Ø 66 x 115.2 mm), 500 ml Standard (Ø 66 x 168 mm) - Lid size: 202 for all formats (plug Ø 52.40 mm) - Electrical supply: 380 V / 220 V, 50 Hz - Filler: compressed air and CO2 at 0.4 MPa - Pasteurizer heating: steam at 0.4 MPa, steam boiler not included Scope of Delivery - Depalletizer | XD400 | automatic tier sheet removal and empty pallet stacking, Siemens PLC and touch screen, 10,000 cans/h, 7.8 kW, approx. 8 x 4 x 3.3 m - Can lowering conveyor | JSJ-A | S-type clamping conveyor from the upper to the ground floor, fits both can formats - Can rinser | CX-1 | inline spray rinser, 2 sets of can cages, approx. 4,000 mm total length - Filler-seamer monoblock | AXW20-4Q | 20 filling valves, 4 seaming heads, automatic lubrication, change parts for Ø 66 mm cans, 7.5 kW, approx. 5,000 kg, 3,050 x 2,000 x 2,000 mm - Tunnel pasteurizer | BG-PLG | 8 temperature zones, 4 plate heat exchangers, 25 kW, 16,000 x 2,400 x 1,800 mm including heat exchangers and piping - Fill level inspection | YMXS-180G | inline - Leak inspection | inline internal pressure check - Can inverters | FGJ | 2 units - Air knife dryer | CG-1 | 24,000 cans/h, 7.5 kW fan - Can conveyors | magnetic chain conveyors, approx. 97 m up to the labeller with 13 drives and control cabinet, plus 22 m of belt conveyor from the labeller to the shrink wrapper - Sleeve labeller | SLM-150 | up to 9,000 cans/h, PM-1800 steam shrink tunnel with steam generator, mandrels for both can formats - Tray shrink wrapper | BT25 (TPM-250A) | film-only packs and tray with film, up to 25 packs/min, max. pack size 420 x 280 x 350 mm, approx. 3,000 kg - Robot palletizer | ABB | IRB 460 | 4-axis robot, 110 kg wrist load, 2.4 m reach, vacuum gripper for 6, 12 and 24 packs in both can formats - Pallet magazine | automatic, holds 8 to 10 empty pallets - Pallet conveyors | heavy-duty roller conveyors - Pallet stretch wrapper | automatic inline turntable wrapper, 2,000 mm turntable, loads up to 1,200 x 1,200 x 1,800 mm, 20 to 30 pallets/h, Siemens PLC and touch screen Condition New and unused, packed in export wooden cases. The photos show reference machines of the same models from the manufacturer's documentation. Availability Immediately. Location: Serbia.

Condition: ready for operation (used), Used can manufacturing line for the production of 73 mm or 99 mm cans. Several compositions of machines are available. Consisting of: Pedsvy Tyxopfx Anyerb - Krupp Sdvt duplex slitter - Soudronic FBB400 welding machine - Soudronic inside powder coating system - Outside lacquering system - Frei curing oven - Metalbox 65d spin flanger - FMI A304 beader - FMC 652 seamer

Condition: used, Year of construction: 2022, machine/vehicle number: LC653, Used Micro can CL10 filling line 4000 Cans per hourTechnical Specifications & Performance DataThis complete automatic canning line is a compact, engineered for efficient beverage production in aluminum cans. Manufactured by Micro Can, it integrates key bottling equipment into a cohesive, space-efficient unit suitable for industrial packaging environments. As a second hand, used bottling line, it offers proven reliability and excellent value for expanding or optimizing production.Line type: Complete automatic canning lineManufacturer: Micro CanMain module: Micro Can CL10 filler/seamerRated output: 4,000 cans per hourContainers: Aluminum cansFormats: Standard 0.33ml and 0.44mlFilling type: gravityAdvanced Automation & Control SystemsThe line is designed for streamlined operation with integrated control and coordinated infeed/outfeed logic between the depalletizer, filler/seamer, and labeling machine. Quick setup and simple recipe changes support efficient format adjustments. Operator-friendly controls, interlocked guards, and emergency stops provide safe, intuitive handling during routine operation and maintenance. The configuration minimizes interface risks and ensures stable synchronization across the complete packaging process.Production Line Integration CapabilitiesOptimized for inline operation, this second hand canning line connects upstream depalletizing to downstream labeling with harmonized conveyor handling. It is suitable for beverage production expansions, pilot facilities, or as a dedicated canning cell within a larger packaging plant. Designed for aluminum cans, it can be interfaced with upstream processing and downstream secondary packaging equipment as needed.Machine TypeManufacturer/ModelYearDepalletizerFilling MonoblockMicro Can CL10Labeling MachineWrap-around labellerMachine Condition & Maintenance HistoryThe line is offered as a complete, ready-to-operate unit. As a used bottling line, it has been configured for immediate deployment in industrial packaging environments, subject to standard site preparation and utilities. Overall condition is consistent with a professionally integrated second hand canning line built for dependable daily operation.Operational Performance & VersatilityWith a rated output of 4,000 cans per hour, the Micro Can CL10 filler/seamer delivers stable filling and precise seaming performance. The wrap-around labeling machine supports continuous production with consistent label application, and the depal... Podpfx Anjzkhtqsyorb

Condition: good (used), functionality: fully functional, Lubeca LW792 filler and LW303 seamer Pjdpfxstqmwgs Anyerb Diameter range: 50 - 160 mm Height range: 65 - 300 mm Production capacity: up to 70 c.p.m. Tooling for approx.: 160 x 90 mm Lubeca LW792 can filler Lubeca LW303 can seamer

Condition: like new (used), JBT Automatic Can Seamer with 48-Piston Filling Unit – Stainless Steel JBT automatic can seamer with a 48-piston filling unit, designed to integrate product dispensing and hermetic can sealing operations within high-production industrial packaging lines. The unit incorporates a 48-piston filling system, enabling continuous and synchronized dispensing before transferring the containers to the sealing section. Its configuration is specifically designed for installations requiring high production speeds, consistent filling, and reliable container sealing. The machine features a robust industrial design primarily in stainless steel, with a fully enclosed and protected work area to ensure safety during production. MAIN FEATURES -Manufacturer: JBT -Type: Filling + automatic can seamer -Filling unit: 48 pistons -Rotary filling system -Automatic and continuous dispensing -Automatic can feed -Synchronized transfer between filling and sealing -Automatic cap feed/positioning system Psdpjzbi Nijfx Anysrb -Mechanical hermetic can sealing -Continuous industrial operation -Designed for high-production lines -Construction primarily in stainless steel -Complete enclosure of the work area -Access doors with inspection windows -Safety guards -Automatic lubrication/service system, depending on configuration -Integrable into complete filling and canning lines PROCESS Empty cans automatically enter the machine and are transferred to the rotary 48-piston filling unit. During their movement, the pistons perform controlled dispensing of the product into each container, providing a repetitive process suitable for continuous production. Once filled, the cans are synchronously transferred to the sealing section. The lid is positioned on the container, and the sealing system performs the mechanical seaming between the can body and the lid, resulting in a hermetically sealed container. The cans can then continue to: Can washers Inspection systems Weight checkers Detectors Autoclaves/retorts Pasteurizers Cooling systems Labeling machines Case packers Palletizers APPLICATIONS Particularly suitable for canneries and industrial food manufacturers who need to integrate filling and sealing in a high-capacity automatic line. Depending on the configuration, format, and dispensing system installed, it can be used for different food products packaged in cans, including products with liquid or semi-liquid components and other formulations compatible with the filling system. The JBT 48-piston unit is especially attractive for installations seeking high production capacity and simultaneous dispensing of multiple containers, immediately followed by automatic sealing. Machine available for inspection. Additional technical information, can formats, capacities, production speed, dimensions, additional photographs, or videos can be provided upon request.

Condition: used, Year of construction: 2018, operating hours: 3,500 h, machine/vehicle number: LC636, Used filling KHS Innofill can line 16000 CPH - year 2018Technical Specifications & Performance DataThis complete used bottling line is a second hand beverage canning system engineered around a KHS can filler block, integrated with high-quality upstream and downstream packaging machinery. Designed for industrial packaging and beverage production, it delivers reliable performance for aluminum cans.Production speed: up to 16000 cph (cans per hour)Primary filler: KHS Innofill Can C (2018)Can seamer: Ferrum FC03 (2018)Depalletizer: SKA Fabricating Can-I-BusInspector: Heuft fill level detectorRinser: AV-C500 can air rinserDryer: Air Control Industries can dryerLabeller: Pack Leader (Advanced Dynamics system)Case packer: Atlanta Rafaello 726Case coding: SATO S86-EX printerConveyors: KHS and AE Conveyors, plus KBR outfeed belt conveyor with PCUtilities/auxiliaries: Conveyor lubricator (Loewados)Container type: Aluminum cansDocumentation: Hard‑copy manuals includedAdvanced Automation & Control SystemsThe line is equipped with dedicated control cabinets for conveyors and labeling, supporting coordinated start/stop logic and smooth product handling. The KHS Innofill Can C filler block provides modern automation architecture with line-friendly integration, recipe handling, and synchronized drives for consistent filling and seaming operations. Safety interlocks and guarding are present across key stations for operator protection and process reliability.Production Line Integration CapabilitiesThis packaging line offers end-to-end integration from depalletizing to case packing, enabling seamless flow of cans through rinsing, filling, seaming, inspection, drying, labeling, and secondary packaging. Modular conveyors by KHS, AE Conveyors, and KBR facilitate balanced accumulation and stable transfer, helping maintain throughput at rated speeds. The configuration is suitable for a wide range of beverage production scenarios and can be adapted to different aluminum can sizes with appropriate change parts and guides.Machine Condition & Maintenance HistoryAs a second hand used bottling line, the core process equipment includes 2018-generation KHS Innofill Can C filler and Ferrum FC03 seamer. The asset list indicates a complete, coherent set of stations with hard‑copy manuals available, supporting efficient commissioning, maintenance, and spare parts management. The line is presented in working condition and ready for operation, subject to standard site preparation and utilities.Operational Performance & VersatilityDesigned for high-efficiency can handling, the line features a SKA Fabricating depalletizer for automated infeed, an air rinser for internal container preparation, precise isometric filling via KHS Innofill Can C, and robust double seaming with the Ferrum FC03. Quality assurance is enhanced by a Heuft fill level detector. Downstream, an Air Control Industries dryer pre... Predpfxoy Szbyo Anyjb

Condition: used, Year of construction: 2003, machine/vehicle number: M338, Used Crown Bevcorp 40 valve filling monoblockTechnical Specifications & Performance DataThis used can filling monoblock combines a Bevcorp UB40 rotary can filler with an Angelus 61H seamer, delivering dependable performance for industrial packaging and beverage production. The system is configured for aluminum cans and is supplied with tooling for multiple can body styles. It is an excellent option for a second hand solution within a used bottling line where reliability and ease of integration are essential.Filler model: UB40 rotary can fillerFiller valves: 40Seamer model: 61HOverhauled in 2019Containers: Aluminum cans (standard and sleek)Ends: 202 can endsSpeed: 20.000 BPHConfigured can sizes: 12 oz (approx. 0.355L) and 16 oz (approx. 0.473L)Included components: Can transfer conveyor, electrical panel, lubrication panel system, stainless steel mechanical safety guarding, handling parts, operator manualElectrical: 480 V, 3 Ph, 60 HzNitrogen dosing: Vacuum barrier nitrogen dosing systemCondition: Used – good; regularly maintainedAdvanced Automation & Control SystemsThe monoblock includes an integrated electrical panel to manage coordinated operation of the filler and seamer. Safety interlocks and stainless steel safety guarding support operator protection during beverage production. Variable speed drive elements are supported by a dedicated lubrication approach for reliable operation under continuous duty. Quick access to guarding and panels facilitates routine adjustments and preventive maintenance in industrial packaging environments.Production Line Integration CapabilitiesDesigned to operate inline with upstream and downstream equipment, this filler–seamer block integrates smoothly into a used bottling line or a new beverage production layout. The included can transfer conveyor simplifies synchronization between the 40-valve filler and the 61H seamer. Existing handling parts and tooling accommodate both standard and sleek aluminum cans with 202 ends, supporting efficient format changes between 12 oz and 16 oz. The monoblock can operate as part of a complete packaging machinery setup alongside depalletizing, rinsing, coding, and case packing systems.Machine Condition & Maintenance HistoryThe equipment is described as used – good and has been regularly maintained. Mechanical safety guarding, lubrication panel, and operator manual are included, indicating a machine that has been cared for and kept in service-ready condition. This makes it a strong second hand choice for plants seeking to expand or refresh beverage production capacity with minimal downtime.Operational Performance & VersatilityEngineered for flexibility, the monoblock is capable of running carbonated and non-carbonated beverages. The 40-valve filler supports steady throughput and consistent fill accuracy, while the Angelus 61H seamer is recognized for robust end application and seam integrity. The vacuum barrier nitrogen dosing system enhances product quali... Pedpfx Aozcf Idsnyjrb

Condition: used, Year of construction: 2018, Overview This compact automated can filling line was manufactured with main equipment from KHS, Ferrum, Ska Fabricating and Atlanta. The line is designed for beverage can production and includes depalletizing, can transport, ionized air rinsing, filling, seaming and downstream film / shrink packaging. The core of the line consists of a KHS Innofill Can C filling system combined with a Ferrum FC03 can seamer. The system is integrated with overhead and floor-mounted can conveyors and is arranged in a compact production layout. Technical Data - Manufacturer / main equipment: KHS / Ferrum / Ska Fabricating / Atlanta - Line type: Automated can filling line - capacity: 15.000/h - Number of filling valves: 21 - Number of seaming heads: 3 Predpfx Ajy Tt H Dsnyjb - Container type: 330ml, 440ml, 500ml standard can - Packaging type: loose cans into 12 & 24 trays and WA boxes - Year: 2018 - Operating hours: 3,446 h - Layout: compact canning line layout with overhead and floor-mounted conveyor sections Scope of Delivery - Can Depalletizer | Ska Fabricating Co. | – | Enclosed depalletizing system with safety guarding | 2018 - Can Conveyor System | KHS / AE | – | Overhead and floor-mounted conveyor network for empty cans and line transfer | 2018 - Ionized Air Rinser | Ska Fabricating Co. | AV-C500 | Empty can rinsing / cleaning module before filling | 2018 - Can Filler | KHS | Innofill Can C | Automated can filling system | 2018 - Fill level detection | Heuft | - - Can Seamer | Ferrum | FC03 | Rotary can seaming unit | 2018 - Can dryer | Air control industries | 2018 - Labeller | Pack Leader Advanced Dynamics | Pro-516 | Labelling machine incl. roller feed | 2018 - Case Packer | Atlanta | Rafaello 726 | packaging system | 2018 - Case Packer Printer | SATO | S86-EX | 2018

Condition: used, Year of construction: 2019, Overview  This isobaric can filling monoblock was manufactured in 2019 by Italy GAI. The GAI MLE 6661 CAN is designed for filling beverages into cans. The machine is already dismantled and stored and is available immediately. Technical data  - Capacity: up to 1,600 cph (33 cl); output up to 650 L/h - Formats: 33 cl standard, 33 cl sleek, 50 cl standard - Application: Can filling - Configuration: Linear monoblock with 6 rinsing valves, 6 filling valves, 1 single-head lid seamer, weight control with expeller, cans washing tunnel, lids storing columns - Lid format: CDL202 - Can diameter: 50 mm – 85 mm Prodpfsyudacjx Anyeb

Condition: used, Year of construction: 1992, Overview This complete automatic can filling line has a nominal output of approx. 20,000 cans/hour for 330 ml cans (can type 211/202), packed 24 cans per foil-shrunk tray. The core is an O+H / KHS Hansacan filler with 30 filling valves, mechanically blocked to a Ferrum F 505 G seamer with 5 seaming heads. Empty cans are supplied by a TMG Impianti Vega 120/B depalletizer and rinsed on a Hysek Rinsstar 20000 rinser before filling. A date/coding printer is not included. Technical data - Line type: Complete automatic can filling line - Nominal output: approx. 20,000 cans/hour (330 ml), product- and temperature-dependent - Container: 330 ml can, can type 211/202; 24 cans per foil-shrunk tray - Controls: PLC Siemens S7, Siemens SIMATIC HMI - Warmer and drying station reconditioned; fill-height control and packaging machine new Equipment - Can Depalletizer | TMG Impianti | Vega 120/B | tier-sheet removal, can table, pallet magazine | 2014 - Can Rinser | Hysek | Rinsstar 20000 | filtered-water rinse | 2001 - Can Filler | O+H / KHS | Hansacan | 30 filling valves, fixed for can type 211/202, will be general overhauled | 1992 - Can Seamer | Ferrum | F 505 G | 5 seaming heads, blocked with the filler | 2010 - Can Warmer | SMB | stainless-steel tunnel | warms cans to approx. 25 °C before packaging | reconditioned - Fill-Height Control | Heuft | incl. pushing/reject station | new Predpszlqu Tefx Anyob - Can Drying Station | Gesete | air-dries cans before coding | reconditioned - Packaging Machine | Termo Pack | UMT-1500 | tray erector, packer and foil shrink | new - 2x can turning stations (330 ml can) - Can conveyor system incl. electrical control panel (PLC Siemens S7) - Tray conveyor system incl. drive station Condition Used line delivered in reconditioned or new condition. The filler and Ferrum seamer are reconditioned and blocked as one unit with a new electrical panel (PLC Siemens S7), new pneumatic panel and renewed pneumatic valves; the can warmer and can drying station are reconditioned; the fill-height control and packaging machine are supplied new. This work is carried out as part of the order, so the line is supplied component by component and is not yet assembled or tested as one running unit. The can depalletizer is the exception - it is already fully reconditioned and in stock. Filler and seamer are delivered with CE declaration and full documentation. Components can be inspected on request. Availability On request; delivery time as per agreement. Reconditioned and new-build components are supplied with a lead time after order. Location and inspection on request.

Condition: used, Year of construction: 2007, Overview This complete can filling line was manufactured mainly in 2007 and is designed for the filling of beer, carbonated soft drinks and other carbonated beverages in aluminium cans. The line has a capacity of approx. 6,000 cans per hour and is suitable for several can formats, including 250 ml slim, 330 ml sleek, 330 ml standard and 500 ml standard cans. The line includes depalletizing, carbonation, filling and seaming, tunnel pasteurization, tray packing / shrink wrapping, conveyors and control system. The equipment is still installed, currently out of production and available for inspection in Northern Europe. The layout shows a compact line arrangement with depalletizer, filler / seamer, tunnel pasteurizer and downstream packaging area. Technical Data - Line type: Complete can filling line - Capacity: approx. 6,000 cans/hour - Main year of manufacture: 2007 - Application: Beer, CSD and carbonated beverages - Can formats: 250 ml slim, 330 ml sleek, 330 ml standard, 500 ml standard - Packaging: 3x4 or 4x6 trays with shrink foil - Filling / seaming: Monoblock 16/4 - Control system: Siemens SIMATIC S7-300 - Condition: excellent condition - Status: still installed, currently out of production - Location: Northern Europe Inspection: possible anytime Scope of Delivery - Can Depalletizer | TMG Impianti | – | Included with conveyors | 2007 Predpfozh Ifusx Anyob - Carbonator | Comac | Carbonator 1 Column | - | 2007 - Filling & Seaming Monoblock | MCD Bottling Solution / Comac | Can Filler 16-4 P.164.85 | 16 filling valves / 4 seaming heads | 2007 - Tunnel Pasteurizer | Comac | Tunnel Pasteurizer | 2007 - Tray Packer / Shrink Wrapper | Dimac | Star One | For 3x4 and 4x6 trays with shrink foil | 2007 - Can Conveyors | Various | – | Complete conveyor system included | 2007

Condition: excellent (used), Year of construction: 2018, functionality: fully functional, machine/vehicle number: 364, Ice cream cones making machine, make COMACO Alimentare, model UNIRUS UR2, MFG: 2018, SN: 364, amperage 25A; power supply 380V, the consumption is 9 Kw, frequency: 50/60 Hz; the machine has a mould with 2 rows, with 7 cavities in each row, the total amount of rows in the mould are 14. The max diameter of the cone measured in mm is 80. The production average productivity with cycle of 2 minutes and temperature of 45 C⁰ is 420 cones. The production average productivity with cycle of 1 minutes and temperature of 45 C⁰ is 480 cones. Semi-automatic machine with inter changeable molds for making ice cream cones. The machine make’s cups and double cones of various size and capacities. The mould is opening and closed by hand. The moulds are field through a special feed device. Heating is made be electric supply 380V. The cones are automatically ejected into a container at the bottom of the machine when the lower mould is operated. Temperature control is automatic: the machine maintain the preset temperature until as signal (visual and audible) indicates the end of the cooking time. Pedpfx Aex Dzifsnyerb Price: 11.400 Euro + VAT, negotiable; Incoterms condition 2025, FCA, Oradea/Romania Irrtum, Anderungen und Zwischenverkauf vorbehalten/Subject to errors, changes and prior sale/

Condition: used, Can filler for beverages, manufacturer: KHS, model: 4 SVF 120 / D, for 80,000 cans/hour with 0.33 l cans for carbonated soft drinks, with can seamer, manufacturer: Angelus, model: 121 L (202), year of manufacture: 1991 Prjdpfx Aoyzhl Ronyjb

Condition: used, Manufacturer : Indosa Origin : Suisse Year: 1990 (completely upgraded in 2006 with Siemens PLC)   Main machine: Indosa Matic 100 automatic seamer Filling / dosing: AW7/500 module Vacuum / dust collector: CK-V09 system Accumulation table: ZT800 Transport: 12-station star wheel Product feed: pneumatic transfer   Machine type: Automatic filling and sealing line for cans Box type: metal or composite Applications : Dry and granular products Examples: Tobacco, powder, granules, dry foods, solid products   Capacity: up to 40-50 units/min (integrated speed control) Can diameter Ø 80 mm standard (other sizes available on request) Box heights from 20 to 320 mm Dosing type : Weight (vibrator + bucket) Product supply : Pneumatic transfer Metal cover seaming, integrated seaming module Vacuum Integrated dust collection module CK-V09 Lid storage feeder : Yes Automatic control   Documents available in digital format.   Prjdpfjx R Dypjx Anyjb Status / Additional information: video available in operation

Condition: used, Year of construction: 2018, machine/vehicle number: LC592, Used complete CSD canning line 2018 - 24.000 bphTechnical Specifications & Performance DataThis complete CSD canning line is a second hand, used bottling line configured for aluminum cans and engineered for reliable beverage production. Manufactured by ZhongChen, the line is designed to deliver consistent quality for carbonated soft drinks at industrial packaging scales. It features a comprehensive equipment set from mixing through downstream wrapping, enabling smooth, continuous operations.Production Speed: 24,000 bphContainer Type: Aluminum cansAvailable Volume Range: 0.33LProduct: CSD (carbonated soft drinks)Build Year: 2018 (major equipment)Main Equipment: Mixer, Filling Machine, Can Seamer, Can Rinser, Can Warmer, Shrink Wrapper, Depalletizer, Conveyor System, COP SystemManufacturer: ZhongChenAdvanced Automation & Control SystemsThe line is arranged for synchronized operation across the primary processing and packaging stages. A centralized control approach ensures coordinated start/stop, accumulation management, and fault handling, providing stable throughput at rated speed. Operator interfaces are designed for straightforward format adjustments and routine production tasks. Safety interlocks and guarding support secure operation while enabling efficient maintenance access.Production Line Integration CapabilitiesThis production line is configured for inline operation, from primary product mixing through filling, seaming, rinsing, and secondary packaging. Conveyor systems provide smooth transfers and buffering between machines to maintain optimal flow. The 0.33L can format is supported across the entire line, with provision for standard format changeover procedures. The layout is compatible with typical upstream syrup preparation and downstream palletizing solutions to form a complete beverage production and industrial packaging system.Machine Condition & Maintenance HistoryThe line is reported as still on line, indicating it remains installed and in use at the time of documentation. The 2018 build year across key machines suggests modern engineering and contemporary safety design. Routine maintenance and serviceability are facilitated by straightforward access points and standard components common to ZhongChen packaging machinery. Operating hours are not specified.Operational Performance & VersatilityOptimized for CSD processing, this used bottling line supports consistent carbonation retention and gentle product handling through filling and seaming. The can rinser and warmer modules help ensure product quality and downstream pack integrity, while the shrink wrapper forms stable packs ready for palletizing. Quality control is supported by stable handling and synchronized transfers to minimize scuffing and deformation, contributing to dependable second hand beverage production results.Installation Requirements & Site PreparationThe line is arranged as a modular set of machines connected by conveyors, allowing flexible placement within a suitable production hall. Standard utilities expected for beverage lines apply, including electrical power, compressed air,... Pjdjydc Ttjpfx Anyjrb

Condition: used, Year of construction: 2017, machine/vehicle number: LC677, Used Wild GoosePak canning line - Year 2017Technical Specifications & Performance DataThis used bottling line is a 2017 Wild Goose 4-head canning line configured for industrial packaging and beverage production in standard LOE aluminum cans. The line is identified as WGC-250 and includes Wild Goose M-250 equipment together with a Wild Goose Paralleltrain unit. It is configured for three established can formats, allowing operators to run multiple retail pack sizes within the same second hand canning system.Manufacturer: Wild GooseLine model: WGC-250Year: 2017Configuration: 4-head canning lineCan formats: 0.355L, 0.473L and 0.568L standard LOE cansElectrical supply: 110 VAdvanced Automation & Control SystemsThe line is described as functional and is arranged as an integrated can handling and filling solution. The supplied information does not identify a PLC type, while the 110 V electrical requirement should be considered during commissioning and site electrical planning. The equipment is supported by available manuals and spare parts, helping maintenance teams prepare routine service procedures and operational changeovers.Safety guards are not included. A buyer should evaluate the safeguarding arrangement, operator access points, interlocks and emergency-stop integration as part of installation planning and before production use.Production Line Integration CapabilitiesThis Wild Goose canning line combines depalletizing, can turning or rinsing and 4-head canning functions in a compact process arrangement. Empty aluminum cans are supplied from the depalletizer, pass through the twist rinser section and continue to the M-250 canning equipment. The configuration is suitable for integration with upstream product preparation and downstream coding, secondary packaging, palletizing and conveying equipment according to the required beverage production layout.Machine type/categoryManufacturer/modelYearDepalletizerWild Goose2017Can Twist ConveyorWild Goose Paralleltrain2017Filling MonoblockWild Goose M-2502017Machine Condition & Maintenance HistoryThe equipment is stated to be functional, supporting its use as a used bottling line for buyers seeking a ready-for-operation canning solution. Manuals are available and spare parts are available. Maintenance records are not supplied, so standard pre-installation inspection, cleaning, functional testing and service planning remain important steps for a smooth handover into production.Operational Performance & Versat... Prodpfx Ajz E Df Asnyjb

Condition: used, Year of construction: 2014, machine/vehicle number: LC675, Used CSAK brewing canning line 2500 cans-hourTechnical Specifications & Performance DataThis complete canning line is a used, fully reconditioned industrial packaging system designed for beer production in standard 330 ml cans. Built around an atmospheric filling process, the line provides a coordinated solution for empty-can handling, filling, labeling and date or lot coding.Production capacity: 2500 cans/hCan format: 0.33L standard cansFilling method: Atmospheric filling, not counter-pressure fillingFiller manufacturer: Cask Brewing SystemsYear: 2014Advanced Automation & Control SystemsThe line includes guarded conveyor-based equipment with integrated operator controls. Visible features include touchscreen control interfaces, status-light towers, pushbutton controls and emergency-stop devices. Pneumatic lines, valves and adjustable conveyor guide components support controlled handling through the packaging process.Production Line Integration CapabilitiesThis complete canning line combines essential process stages for beer canning, from depalletizing empty cans through atmospheric filling, labeling and coding. It can be integrated with upstream beer-processing equipment and downstream secondary packaging machinery through suitable conveying and line-control arrangements.Machine typeManufacturer / modelYearDepalletizerCan depalletizer/elevatorFilling MonoblockCask Brewing Systems atmospheric filler2014Labeling MachineS2S Labelling Machines S2/ZPrinterLinx inkjet coderThe 0.33L can format makes this equipment suitable for producers requiring a compact beverage production solution for standard beer cans. The modular arrangement also supports practical connection to can conveyors, accumulation sections and downstream industrial packaging operations.Machine Condition & Maintenance HistoryThe line is used and fully reconditioned, providing a prepared second hand canning solution for operation. Its reconditioned condition is particularly relevant for buyers seeking established beverage production equipment with the core filling, labeling and coding functions supplied as one line.Operational Performance & VersatilityThe atmospheric filler is intended for beer in cans and is specifically identified as a non-counter-pressure filling system. The line incorporates an empty-can depalletizer/elevator, a Cask Brewing Systems filler, a Linx inkjet coder and an S2S Labelling... Prsdpjz E Dhkefx Anyjb

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2023, We are offering this ready-to-use Cask 3 Head Fill Station filling technology, manufactured in 2023. Prjdpfezzmfasx Anysb Number of filling heads: 3 Filling capacity: 25 cans/minute Hourly capacity: 63 cases/hour Dissolved oxygen level: 15 - 20 ppb Footprint dimensions: 7’ x 2.5’ Footprint area: 17.5 ft² If you have any questions or would like more information, please feel free to send us a message or call us.

Condition: excellent (used), Year of construction: 2017, functionality: fully functional, Frey CLB CAN Portioning Machine for Minced Meat Manufacturer: Frey Maschinenbau GmbH Model: CLB CAN Machine number: CLB 1471527 Year of manufacture: 2017 Power supply: 230 V, 50/60 Hz Power: 0.50 kW Conveyor belt: plastic Belt width: (2×) 300 mm Working clearance: 300 × 70 mm Overall dimensions of main unit: 2050 × 700 × 1750 mm Included in the set: 2 portioning devices plastic conveyor belt belt width: 300 mm knife width: 235 mm dimensions: 680 × 550 × 1730 mm 680 × 550 × 1470 mm The Frey CLB CAN portioning machine for minced meat is a modern and precise device designed for portioning various types of meat masses. Thanks to its compact design, it can be flexibly integrated into a production line and easily relocated between workstations. The machine ensures even and accurate portioning of products with differing consistencies, maintaining high portion repeatability. The plastic conveyor belt is easy to clean and meets the hygiene requirements of the food industry. The Frey CLB CAN portioning machine is ideal for the production of minced meat portions, burgers, or other formed meat products. Pedpfx Ajyah U Uenyerb

Condition: excellent (used), Year of construction: 2020, functionality: fully functional, 16-head rotary filling machine with 2 checkweighers year: 2020 Predjzlhy Hopfx Anyjb

Condition: like new (used), Year of construction: 2019, operating hours: 1,000 h, functionality: fully functional, type of input current: AC, total length: 3,000 mm, total height: 18,001,500 mm, input voltage: 220 V, overall weight: 300 kg, compressed air connection: 6 bar, year of last overhaul: 2022, air pressure: 6 bar, product height (max.): 150 mm, For sale: a lightly used can sealing machine for composite cans / cardboard-wrapped cans, set to a can diameter of 72 mm; the height is adjustable. Sheet metal lids are fed onto the cans via a magazine and crimped. The clamping jaws are new and can be finely adjusted as required. The conveyor belt speed and sealing speed can be set automatically via the control panel. Average Prjdpszh Ebtsfx Anyeb cycle time is 30–40 cans per minute. The machine is made entirely of stainless steel and is ready for use. Rated voltage 220 volts.

Condition: ready for operation (used), Can diameter range: 50 mm - 100 mm Can height range: 28mm - 120mm Capacity: up to 200 cans per minute Tooling for approx.: 73mm No. or seaming heads: 6 No. of filling pistons: 16 Predpfx Answnriajyeb Single knive member separator Driven lifters Siemens touchscreen

Year of construction: 1973, condition: ready for operation (used), An FMI separating machine for can production is available. Production capacity: approx. 500cans/min, diameter range: 52mm-99mm, height range: 40mm-85mm. An on-site inspection is possible. Prjdpfxey I Adzo Anyob

Year of construction: 1970, condition: ready for operation (used), A beader, flanging and beading machine for cans by Metal Box Company is available. Can type: 3-piece cans, can shape: round, tool diameter: 150mm, max. can height: 180mm, performance range: 70-280cans/min. An on-site inspection is possible. Pedpfey I Adnex Anyerb

Condition: ready for operation (used), Year of construction: 1968, A mechanical Karges-Hammer eccentric press for series production in can manufacturing is available. Ram stroke: 75mm, flywheel speed: 80rpm, motor power: 3HP, speed: 294rpm. An on-site inspection is possible. Pjdpfx Ansy Ndfioysrb