Used Constant Supemec P65 for sale (1,411)

Condition: refurbished (used), functionality: fully functional, Year of construction: 1988, machine/vehicle number: 3615/673, input voltage: 400 V, input frequency: 50 Hz, broaching length: 1,000 mm, number of broaching positions: 1, broaching speed: 3 m/min, reverse speed: 3 mm/s, total length: 750 mm, total width: 800 mm, total height: 2,250 mm, -WR 177- Manufacturer: Rausch Model: RS3 /1000 Machine No.: 3615/673 Year of Manufacture: 1988 Weight: 350kg Overhaul: 04/2025 by Wiemers AG General / Technical Data: Unused, partially overhauled, mechanical vertical broaching machine Rausch RS 3 without CE marking Pulling force: 3,000kg Broaching speeds: 3m/min Return speed: 3m/min Maximum stroke: 1000mm Maximum tool length: 1200mm Table size / work area: 430mm x 320mm / 340mm x 220mm Table through-hole: Ø 90mm for standard broaching mandrels "System Rausch" Workpiece diameter: any (with the cabin removed) Broaching capacity / keyway width: up to 18mm in steel (from 16mm keyway width only with offset tool shank) Dimensions (h x w x d): 2,250mm x 800mm x 750mm (h = including 3-sided protective cabin) Ijdpfjz Hl U Isx Amgsih Motor: 3.0kw / Power supply: 400V / 50 Hz Equipment: - Protective door with safety monitoring (emergency stop circuit) - Chip chute - Externally adjustable tool length adjustment system (System Rausch) - Protective cover for stroke adjustment and electrical switching units - Electrical sensing of the clamping jaws (System Rausch) (Tool removal control to prevent unintentional retraction of the drawbar, providing additional safety for the operator & tool) - Integrated coolant system - 4-sided enclosed splash guard hood with protective door - Extra reinforced chip basket and chip sieve with magnet insert - Control panel external - 2 grease points for the trapezoidal spindle drive with manual grease gun directly on the spindle nut Note: The machine has been partially overhauled by Rausch. The following wear parts have been replaced and renewed. - New trapezoidal spindles and spindle nuts made of cast, wear-resistant bronze - All bearings and seals are new - New electrical system - 4-sided enclosed splash guard hood with protective door at the front - New protective door instead of the light barrier in the machine room - New clamping jaws - All sheet metal parts, such as covers, chip chute, basket, sieve and spindle protection, are new. - External control panel General The double spindle drive ensures a smooth and central pulling point as well as a constant broaching speed. The machine is primarily designed for the production of keyways up to 18mm. (from 16mm keyway tools only with offset tool shanks) Due to its design, the machine can be quickly and easily set up for broaching with flat broaching tools for keyways. Due to the structurally universal design of the drawbar and the machine table, broaching with profile and flat broaching tools is possible without the use of additional draw heads.

Condition: used, mileage: 221,612 km, power: 210 kW (285.52 HP), first registration: 02/2008, fuel type: diesel, overall weight: 16,000 kg, axle configuration: 2 axles, next inspection (TÜV): 02/2026, color: green, gearing type: mechanical, emission class: euro5, total length: 8,850 mm, total width: 2,550 mm, total height: 2,800 mm, loading space length: 6,400 mm, loading space width: 2,500 mm, loading space height: 500 mm, Year of construction: 2008, Equipment: ABS, air conditioning, parking heater, Equipment: * Audio system: Truckline CD 65 / 70 radio including CD player * Differential lock, rear axle * Electric windows * Hands-free phone system Iiodpfx Aszt E Idemgeh * Transmission: 9-speed - Type: G 131-9 * Engine brake * Hill start assist * Seats in the cab: Driver's seat, sprung comfort seat * CB radio * Auxiliary heater (air) * Exterior mirrors, electrically adjustable and heated * Cab: L (long) * Suspension: leaf spring / leaf spring * Urea tank (AdBlue): 25 liters * Fuel tank: 180 liters, plastic * Engine: 6.4 liters - 210 kW diesel (OM 906 LA) * Engine brake with constant throttle * Wheelbase: 4760 mm ----Vehicle number 12021 ----Errors and prior sale excepted

Condition: good (used), Year of construction: 2000, Operation: Products are placed loose or in trays by the employees onto the infeed conveyor with carriers. This infeed conveyor transports the filled trays/loose products to the infeed control. This infeed control ensures that the filled trays/loose products are taken along by the carriers at a constant speed. These carriers push the trays/loose products into the film. A rotating sealing system performs the seals, and the rotating sealing bars ensure the sealing, cutting and separation of the filled trays/loose products. During this process, a label is also automatically applied to the packaging. The sealed trays/loose products are discharged from the machine via the outfeed belt. Specially designed for medium-sized products/trays where flow-pack packaging is required for loose or tray-based goods. Therefore flexible and ideal for packing traffic-light peppers.loading space 330 cm CAB SQUIX 4 label printer The professional CAB SQUIX 4 label printers fit into a wide range of industrial applications. They are developed with a focus on simple and easy operation and high reliability. The print mechanics and chassis are made of high-quality materials. Iiodpfx Amjz Rd Ayjgeh Whether used in stand-alone mode, in a PC application or in a network – the robust SQUIX printers always perform excellently. The fast processor ensures rapid task processing and immediately provides the required label. The CAB SQUIX 4 is an affordable and highly reliable industrial label printer, with the unique strength of performing exceptionally well when printing small labels. Because they excel in this area, they are available in two high resolutions: 300dpi and 600dpi. This model is particularly suitable for thermal transfer printing of labels, but can also be used as a direct thermal printer if desired. More information or a quote? Do this quick and easily via the Duijndam Machines website! You can also give us a call. See all the available machines at our website. Since 1977 supplier of reliable used agricultural and horticultural equipmentMachines are checked for deliveryExperienced teamWe can help you with getting the machine to your company Duijndam Machines The specialist in used agriculture and horticulture machinery

Condition: excellent (used), Year of construction: 2007, 1 used, very well-maintained high-performance cycle turning machine with FAGOR 8055 TC-A, 8-position tool turret BARUFFALDI VDI 40, pneumatic 3-jaw front chuck SCHUNK ROTA TP 315-105, constant cutting speed, 1 large steady rest, and articulated chip conveyor. Manufacturer: MICROTURN, Origin Taiwan Model: Challenger BNC 26160X Year of manufacture: 2007 Technical data: Center height: 350 mm Distance between centers: 4000 mm Swinging diameter over bed: 690 mm Swinging diameter over cross slide: approx. 420 mm Swinging diameter in the gap: 870 mm Spindle speeds: 0 – 2400 rpm Spindle bore: 82 mm Spindle motor: 15 / 22 kW Machine dimensions + chip conveyor L x W x H: 7350 x 2450 x 2050 mm Machine weight: 6,800 kg Accessories / special features: • Cycle control FAGOR CNC 8055 TC-A with alphanumeric keyboard o LCD color monitor o Graphical simulation of the cycles o 2 electronic handwheels • Pneumatic 3-jaw front chuck SCHUNK ROTA TP 315-105, Ø 315 mm • 8-position tool turret BARUFFALDI TB 160-8/12, VDI 40 • Articulated chip conveyor • 1 unused fixed steady rest with rollers, inner diameter approx. 380 mm • Automatic lubrication of the headstock • Automatic lubrication of the longitudinal and cross slides • Tailstock with hydraulically actuated quill • Coolant system • CE compliant New FAGOR servo controller for main spindle control, repair costs €4,950.00 net Ijdpfx Aozfqdnemgsih Siegfried Volz Werkzeugmaschinen Rüschebrinkstr. 151-153 DE - 44143 Dortmund - Wambel / Germany

Condition: good (used), Year of construction: 2008, Manter VP16000 – 16-head multihead weigher Used for: weighing, counting and mixing peppers with direct discharge to flowpacker. With it's large weighing containers this machine can also be used for weighing other products, such as potatoes, onion, carrots, ect. Overview Robust Manter weigher with 16 weighing buckets, designed for high accuracy and gentle product handling. Ideal for (colour) mixes, piece counting and weight-based portions of peppers towards flowpacker. Main features 16 weighing buckets for accurate combination weighing and mixing3 feeding conveyors with dosing belt (frequency controlled) for constant product feedMoving brush above the vibrating trays for optimal singulation (fewer double layers/clogging)Cross discharge belt under the weighing buckets with flap for controlled release to packaging lineCounting function via sensors above the weighing buckets (piece packaging possible)Flowpacker-ready: stable, even product flow Modes & functionality Weight mode: precise target weights (e.g. 500 g / 1 kg / 1,5 kg)Count mode: set quantities (e.g. 2-, 3-, 4-pieces) Mix mode: colour/size mixing based on recipes (recipes adjustable per order) Recipe management: Quick changeover between customer orders and packaging types Practical advantages Gentle handling of peppers due to even distribution and brush singulationHigh line stability towards flowpacker due to cross discharge and controlled drops Flexible: quick change between weighing, counting and mixing without conversion Less waste & give-away thanks to frequency control and sensor counting Operational indications Capacity: depending on target weight, piece size and desired presentation (on request)Accuracy: suitable for retail portions and piece packaging (calibration recommended per product batch) Maintenance & hygiene Daily: clean vibrating trays/brush, visual check of weighing buckets/flapsWeekly: check belt tension, bearings, vibrating parts; clean sensors Periodically: calibrate load cells, inspect flap mechanisms and brush drive Recommended spare parts: brush, belt hinge sets, flap actuators, sensors, load cell cables Connections & info Power & compressed air: Estimated dimensions when in production: 950x240x350cm. Infeed conveyor is 600cm long. More information or a quote? Do this quick and easily via the Duijndam Machines website! You can also give us a call. Iedpez Rdtlefx Amgsih See all the available machines at our website. Since 1977 supplier of reliable used agricultural and horticultural equipmentMachines are checked for deliveryExperienced teamWe can help you with getting the machine to your company Duijndam Machines The specialist in used agriculture and horticulture machinery

Condition: ready for operation (used), Year of construction: 2020, travel distance X-axis: 350 mm, travel distance Y-axis: 550 mm, travel distance Z-axis: 510 mm, controller manufacturer: MAZATROL, controller model: SmoothG, total height: 2,840 mm, total width: 1,900 mm, overall weight: 7,100 kg, spindle speed (max.): 18,000 rpm, number of slots in tool magazine: 30, tool weight: 8,000 g, product length (max.): 3,060 mm, number of axes: 5, This 5-axis Mazak VARIAXIS J-500/5X was manufactured in 2020. It features a maximum spindle speed of 18,000 rpm and a rapid traverse rate of 30,000 mm/min. The machine includes a tool magazine capacity of 30 tools and a robust table size of 500 x 400 mm. If you are looking to get high-quality machining capabilities, consider the Mazak VARIAXIS J-500/5X vertical machining centre we have for sale. Contact us for further details. • CNC control: MAZATROL SmoothX with 19-inch colour touchscreenWorking capacity and travels • A-axis tilt: -120° to +30° • C-axis rotation: ±360° • A/C indexing increment: 0.0001° • Rapid traverse X/Y/Z: 30,000 mm/min • Max cutting feed X/Y/Z: 30,000 mm/min • A-axis index time: 0.6 s per 90° • C-axis index time: 0.55 s per 90° / 1.05 s per 180°Table and clearances • Tilting/rotary table (A/C axes) • Table size: 500 × 400 mm • Table with T-slots (as per final configuration) Iisdpjz Iqgrofx Amgoh • Spindle nose to table surface (table horizontal): 50–560 mm • Spindle nose to table centre (table vertical): 40–550 mmSpindle • Spindle chiller with 16 L cooling oil tank • Programmable spindle orientation in 1° incrementsTool magazine and ATC • ATC with recovery function; digital magazine display and external operating panel • Tool selection: fixed addresses with automatic shortest-path selection • Pull stud: Yamazaki ANSI • Max tool length: 300 mm • Max tool diameter with adjacent tools: 90 mm • Max tool diameter with adjacent pockets empty: 130 mm • Chip-to-chip time: 6.20 sMeasuring and probing • Renishaw RMP600 radio workpiece probe • MAZA-CHECK system • Automatic tool length measurement and tool breakage detection • G37 automatic tool length measurement • Absolute positioning systemCoolant and chip management • Through-tool high-pressure coolant: approx. 15 kgf/cm² (≈14.7 bar), approx. 35 L/min • Coolant tank: 300 L • Coolant washdown system and manual washdown gun • Cooling for X/Y/Z ball screws • Workpiece air blastControl and software • MAZATROL SmoothX CNC • EIA/ISO programming package • Simultaneous 5-axis control • Additional 5-axis machining package for SmoothX • 3D coordinate rotation • Smooth synchronous tapping • G00 Slope Constant (rapid optimization) • Smooth restart • Tilted machining plane • Inverse Time Feed • Extended work offsets: 300 pairs • Variable macros: 600 variables • High-speed machining and smoothing • Geometric compensation for rotary axes • Interfaces: USB, LAN, SD cardConstruction, safety, and other features • Electronic handwheel • Three-colour signal tower • Automatic machine power on/off and warm-up • Roller linear guideways • Full enclosure with top cover; interlocked operator door • Work area lighting • Intelligent Safety Shield (ISS) • CE marking Additional equipment • CROWTHER right-side hinged-belt chip conveyor (for steel machining) • GX500 mist extraction unit with extraction preparation • European-market power transformer • Machine installation kit • Polish manuals and safety labels Technical Specification Taper Size SK 40 Through-spindle Coolant Yes

Condition: excellent (used), General Specifications The machine is equipped with two dividing heads and underwent a complete overhaul in 2021. siemens 840D SL Specification Value Manufacturer ZAYER Model KMU 8000 Machine Type CNC Machining Centre Iijdpfx Aoz Sz Nmsmgjh Table Surface 8,000 × 1,000 mm T-Slots (Number × Width × Spacing) 7 × 22 × 125 mm Longitudinal Travel (X-Axis) 6,300 mm Transversal Travel (Y-Axis) 1,000 mm (Special: 1,250 mm) Vertical Travel (Z-Axis) 1,500 mm (Special: 2,000 mm) Minimum / Maximum Distance from Table to Spindle Nose 23–1,523 mm (Special: 23–2,023 mm) Spindle Specifications Specification Value Spindle Speed Range 35–3,000 rpm Range I – Constant Torque 35–245 rpm Range I – Constant Torque (Special) 20–110 rpm Constant Torque 88 mkp (Special: 200 mkp) Range I – Constant Power 245–1,000 rpm Range I – Constant Power (Special) 110–450 rpm Range II – Constant Power 980–3,000 rpm Range II – Constant Power (Special) 430–1,800 rpm Tool Taper MAS BT50 (Special: ANSI 50) Main Motor Power 30 HP Feed Rates Specification Value Working Feed Rate 6–5,000 mm/min Rapid Traverse 15,000 mm/min Tool Magazine Specification Value Tool Magazine Capacity 24 tools (Special: 30 or 60 tools) Maximum Tool Weight 20 kg* Accuracy and Capacity Specification Value Positioning Accuracy / Repeatability ±0.015 / 0.01 mm Maximum Table Load 20,000 kg Machine Net Weight 29,500 kg

Condition: used, Year of construction: 2015, workpiece length beliebig mm work piece width 1500 mm Sanding height max. 100 mm speeds of grinding spindle 400-1600 stufenl. U/min feed stepless 1 - 5 m/min rated capacity 4 x 2,2 KW Dust suction hood 200 mm total power requirement ca. 9 kW weight of the machine ca. 1,8 t dimensions of the machine ca. 1,9 x 2,4 x 1,9 m Deburring and chamfering system for stamped and laser-cut parts. The Discmaster 4Td is equipped with two large deburring discs and two chamfering discs, which oscillate multiple times over the entire workpiece.|This unique technology enables cost-effective chamfering of stamped and laser-cut parts and offers significant advantages over conventional machines. Machine: 2 disc units on the infeed side, Ã? 250 mm, 2.2 kW drive, separate height adjustment - 2 disc units on the outfeed side, Ã? 250 mm, 2.2 kW drive, separate height adjustment - Transverse oscillation of the disc units perpendicular to the feed direction, 2.2 kW gearmotor - Robust linear guide for oscillation - Enclosed machine housing - 4 spring-loaded, rubber-coated hold-down rollers - Conveyor belt feed - Constant table height (passage height) - Pneumatically controlled conveyor belt centering - Guidance of the entire grinding unit via 4 heavy-duty round guides and trapezoidal lead screws | - Strip brush for conveyor belt cleaning - Includes stepless speed control for the cutting units - Includes cleaning brushes, rotating, Ã? 120 mm, width 1500 mm - Overfeed protection flap for workpieces that are too thick Iiedpfjz I Ucdex Amgjh - Motorized workpiece thickness adjustment For small parts starting at 20 x 20 mm up to material widths of 1500 mm

Condition: good (used), Year of construction: 2009, functionality: fully functional, machine/vehicle number: 75080154.1/TKT 2, type of input current: three-phase, input voltage: 400 V, input current: 40 A, 30 C – FINN-CONVEY V307 Conveyor 3-Level Table System – Modular Cutting Room Conveyor Description For sale is a FINN-CONVEY V307 conveyor 3-level table system designed for textile cutting room operations. This system functions as a modular conveyor-based table solution for material handling and fabric movement within production. It enables efficient workflow between spreading, buffering, inspection, and cutting stages. Iijdpfx Amoy Akpzegsh The system has been operated as part of a fully integrated cutting line together with a Lectra Vectorfashion VT-FA-Q2-72 (unit 35 C). This integration significantly reduces manual handling and downtime, especially during fabric roll changes and feeding operations. The video material also shows a GERBER XLS-125-180-L Spreader (unit 32 C), which was used in the same production line. The equipment has been used in a professional garment factory and was operational prior to factory shutdown. Recently serviced on 27.02.2026. Includes • FINN-CONVEY V307 conveyor table system • Multi-level conveyor structure (3 levels) • Integrated belt transport system • Drive motors and transmission units • Sensor components for positioning and control • Electrical control cabinet Technical Details • Manufacturer: Finn-Convey • Model: V307 • Type: Conveyor table system • Application: Fabric handling and transport in cutting rooms • Configuration: Multi-level modular system • Levels: 3-level buffer structure • Power: Industrial 3-phase system Key Advantages • Full integration with automated cutting systems (Lectra line ready) • Reduced manual labor in fabric feeding and handling • Continuous material flow for optimized cutting efficiency • Modular system adaptable to different production layouts • Industrial-grade mechanical construction for long service life Production Efficiency The 3-level buffer structure allows continuous operation of the cutting machine by maintaining a constant material supply. This reduces idle time and enables • Higher throughput in cutting operations • Efficient batch handling • Improved workflow synchronization across production stages Build Quality Finn-Convey systems are known for their robust mechanical construction, designed for long-term industrial use. With proper maintenance, these systems are built to operate reliably for decades. Condition Used industrial condition Fully functional prior to shutdown Typical signs of use from production environment Inspection possible prior to dismantling Sold as-is, where-is, without warranty Typical Applications • Cutting room conveyor systems • Fabric transport and handling • Workflow optimization in garment production • Textile production lines Location: Valga, Estonia Removal & transport: Buyer responsible for dismantling and transport Professional dismantling recommended due to system size

Condition: ready for operation (used), Year of construction: 2024, laser power: 6,000 W, This HGTECH TP 6535 PLUS was manufactured in 2024. It is a fiber CNC cutting laser designed for cutting pipes, tubes, and both closed and open profiles. It operates with power ranging from 1 to 6 kW and can handle pipes up to 8.5 meters long and 280 mm in diameter. Contact us for more information about this machine. Iiodpfx Amsz R Swaegeh • Capacity: Cuts pipes up to 8.5 m in length and up to 280 mm in diameter

Condition: used, mileage: 70,000 km, power: 62 kW (84.30 HP), first registration: 12/2015, fuel type: diesel, overall weight: 2,800 kg, color: yellow, gearing type: mechanical, emission class: euro5, number of seats: 3, Equipment: ABS, central locking, electronic stability program (ESP), soot filter, Registration date: 12/2015 Mileage: 70,000 km Net selling price: €8,380 VAT can be shown separately EURO 5 - Facelift Please, no emails / no eMails Due to time constraints, we cannot process them. Thank you for your understanding! More offers in stock: !!! Large selection !!! !!! Constant rotation of Volkswagen T5 vans !!! VAT can be shown separately Opening hours and more information: Viewing and purchase possible without prior registration: MON - THU: 9:00 a.m. to 4:00 p.m. FRI: 9:00 a.m. - 1:00 p.m. SAT: 9:00 a.m. - 12:00 p.m. Address: Tabakried 11 84076 Pfeffenhausen If you have any questions: Christian Hirsch If you have any questions: Christian Hirsch Please try again later, as we are often in customer consultations. More offers can be found under: ---- More T5 vans in stock Prices: Price depends on: - Mileage - Initial registration - Optical condition - Technical condition - TÜV (technical inspection) due - TÜV / Inspection NEW - Service due - Service NEW - 1-seater - 2-seater - 3-seater ---- VAT can be shown separately VAT can be shown separately If you have any questions: Christian Hirsch !!! Emails will not be answered !!!! If you have any questions: Christian Hirsch If you have any questions: Christian Hirsch Please try again later, as we are often in customer consultations. ---- Opening hours and more information: Viewing / purchase possible without prior registration: Iedpfxjz Si Ede Amgsih MON - THU: 9:00 a.m. to 4:00 p.m. FRI: 9:00 a.m. - 1:00 p.m. SAT: 9:00 a.m. - 12:00 p.m. Address: Tabakried 11 84076 Pfeffenhausen Please, no emails / no eMails Due to time constraints, we cannot process them. Thank you for your understanding! ---- More offers in stock: VAT can be shown separately If you have any questions: Christian Hirsch Special features: Floor covering in the driver's cab: Rubber, Electrical package 1, Rear tailgate with glazing, Heated rear window with wiper system, High cargo compartment partition with fixed window, Multifunction display / On-board computer, Instrument cluster with 2 display instruments, Rear parking distance control, Smoker package, Spare wheel in driving condition, Sliding door for cargo / passenger compartment on the left, Mud flaps front and rear, Seat cover / upholstery: Durable seat covers, Seats in the driver's cab: Lumbar support for the driver's seat, Interior trim in the cargo / passenger compartment: Hard fiber, partially high Additional equipment: Airbag driver / front passenger side, Exterior mirror aspherical, left, Exterior mirror convex, right, Driving assistance system: Brake assistant (HBA), Vehicle without windows in the cargo / passenger compartment, Vehicle without child safety lock in the cargo / passenger compartment, Body / structure: Panel van, Body version: Normal roof, Headlight range control, Truck registration, Engine 2.0 L - 62 kW TDI, Pollen filter, Wheelbase 3000 mm, Low emission according to Euro 5 emission standard, Headlights H4, Sliding door for cargo / passenger compartment on the right, Seats in the driver's cab: Front passenger seat adjustable, Seats in the driver's cab: Driver's seat adjustable, Seats in the cargo / passenger compartment: 1st row of seats omitted, Heat protection glazing, Permissible total weight 2.80 t ---- More offers can be found under: Equipment was determined with the help of a VIN query; technical errors may occur. Information provided on the internet are non-binding descriptions. They do not constitute guaranteed characteristi

Condition: excellent (used), For sale: Hypertherm Powermax 800 D plasma cutter in very good condition. /////Price stated is for 1 unit/////. Hypertherm Powermax 800 plasma cutter Iiodpfx Amsz Sb I Dsgoh Plasma cutter description: The Powermax800 plasma cutting system uses an inverter power supply to provide smooth DC output voltage, ensuring excellent cutting and grooving quality for mild steel, stainless steel, aluminum, and other metals. The Powermax800 power supply provides a constant output current with a variable range from 20 to 50 amps, ensuring optimal performance for all metal thicknesses up to 1/2 inch (12 mm). At 50 amps, the Powermax800 can cut metals up to 3/4 inch (20 mm) thick and pierce metals up to 1 inch (25 mm) thick.

Condition: excellent (used), Year of construction: 2016, functionality: fully functional, travel distance X-axis: 4,000 mm, travel distance Y-axis: 2,200 mm, travel distance Z-axis: 1,100 mm, table length: 4,500 mm, table width: 2,500 mm, spindle speed (max.): 22,000 rpm, CNC Heidenhain iTNC 640 WORKING AREA: Iedpfxsyv In Ij Amgjih Longitudinal X-axis travel: mm 4.000 Transversal Y-axis travel: mm 2.200 Vertical Z-axis travel: mm 1.100 Maximum speed with interpolating axes: m/min 50 WORKTABLE: Dimensions: mm 4.500 x 2.500 Height: mm 300 Load capacity: T/m² 15 T-slots for workpiece clamping mm 28 DIN 650 (H12), complete with leveling elements. T-slot direction parallel to Y-axis movement. CONTINUOUS POSITIONING UNIVERSAL HEAD WITH ELECTROSPINDLE: Automatic universal head indexed to 360,000 positions (every 0.001°). Rotation is driven by direct drive motors and controlled by the CNC as a positioning axis. Automatic tool clamping. Allows 10° undercut machining. Internal cooling system for bearings and axis motors. C-axis rotation range: ± 270° A-axis rotation range: ± 185° Maximum axis rotation speed: rpm 30 Maximum torque available on A/C axes: Nm 450 Axis clamping torque: Nm 1.400 Spindle power (S1/S6): kW 22/33 Spindle torque (S1/S6): Nm 84/128 Maximum spindle speed: rpm 22.000 Constant power range: rpm 3.000 to 18.000 Constant torque range: rpm 10 to 3.000 Tool interface: HSK-A63 DIN 69893 ELECTROSPINDLE HSK-A100 WITH SEMI-AUTOMATIC CHANGE SYSTEM Spindle power (S1/S6): kW 37/43 Spindle torque (S1/S6): Nm 140/165 Maximum spindle speed: rpm 15.000 Constant power range: rpm 2.500 to 12.000 Constant torque range: rpm 10 to 2.500 Tool interface: HSK-A100 DIN 69893 CHAIN TOOL MAGAZINE – 55 POSITIONS, HSK-A100 / HSK-A63 Floor-mounted fixed chain magazine located at the rear of the machine, fully enclosed for operator protection, equipped with a vertical tool change arm and automatic tool pre-selection. Fixed-pocket management system. Hydraulic axis locking Total tools: No. 55 HSK-A63 tools (DIN 69893): Number of tools: No. 30 Max tool diameter: mm 90 Max tool diameter (with adjacent pockets free): mm 160 Max tool length: mm 300 Max tool weight: kg 10 HSK-A100 tools (DIN 69893): Number of tools: No. 25 Max tool diameter: mm 100 Max tool diameter (with adjacent pockets free): mm 160 Max tool length: mm 450 Max tool weight: kg 20 REQUIRED CONNECTIONS Maximum installed power: kVA 177 Maximum current required: A 235 MACHINE EQUIPPED WITH: • Heidenhain HR550 remote electronic handwheel • High-pressure water and air through the spindle • Semi-automatic electrospindle change system with HSK-A63 and HSK-A100 interfaces • Various tooling included with the machine • Renishaw probe • BLUM laser presetting system • AUTOCAL automatic head calibration system • Visormax subscription for remote monitoring • Electrical cabinet air conditioning unit • Cooling system for all axes and the electrospindle • User and maintenance manual and CE declaration of conformity

Condition: excellent (used), Year of construction: 2002, functionality: fully functional, turning diameter over cross slide: 365 mm, spindle bore: 105 mm, turning length: 1,500 mm, turning diameter over bed slide: 600 mm, swing diameter over cross slide: 365 mm, quill diameter: 68 mm, spindle speed (max.): 2,200 rpm, feed rate X-axis: 10 m/min, feed rate Z-axis: 12 m/min, travel distance X-axis: 310 mm, travel distance Z-axis: 1,500 mm, spindle diameter: 250 mm, workpiece diameter between centers: 365 mm, distance between centers: 1,500 mm, CNC ECS 2400 Center height above the bed: 300 mm Spindle nose: CAM LOCK 8" Spindle bore diameter: 105 mm Spindle motor power – S1/S6: 9/13 kW Spindle speed ranges: 2 with automatic change Maximum spindle speed: 2200 rpm Spindle speed at constant power: 75/2200 rpm Spindle speed at constant power (I range): 10 + 75/430 rpm Iedsz Ig T Iepfx Amgoih Spindle speed at constant power (II range): 40 + 380/2200 rpm Maximum spindle torque: 1650 Nm Maximum diameter on the bed: 600 mm Maximum diameter on the carriage: 365 mm Nominal distance between centers: 1,500 mm Controlled travel of axis "X": 310 mm Controlled travel of axis "Z": 1,500 mm Rapid traverse rate of axis "X": 10,000 mm/min Rapid traverse rate of axis "Z": 12,000 mm/min Continuous feed force of axis "X": 300 daN Continuous feed force of axis "Z": 1000 daN Tailstock bore diameter: 68 mm Tailstock travel: 220 mm Axial thrust of the tailstock: 1,200 daN Supply voltage: 400 V (50 Hz) Total installed power: 20 kW Machine complete with: • Self-centering chuck, Pinto, diameter 250, 3+3 jaws • Electric tool turret, 8 positions • Fixed steady rest • Operation and maintenance manuals • CE declaration of conformity

Condition: ready for operation (used), KUPFERMÜHLE DOMA-g-1620-V44 Four-sided planer with constant table height for varying wood thicknesses Working width max. 1620 mm Planing height, 2 sides max. 300 mm Planing height, 4 sides max. 240 mm (OPTION: can be converted to 300 mm) Feed rate in 6 stages 4.5 - 26 m/min Total electrical power 91 kW 4 horizontal planing shafts bottom right 11.0 kW bottom left 15.0 kW top right 18.5 kW top left 18.5 kW 2 vertical milling units x 7.5 kW with mounted aluminum planing heads H 240 mm Machine mounted on a rotary bearing Wood widths up to 820 mm can be planed with energy efficiency with 1 motor at the bottom + 1 motor at the top good technical condition of the machine with functional guarantee Iiodpfszlbz Rjx Amgoh year 1981 last inspection by the manufacturer in 2025

Year of construction: 2021, condition: used, functionality: fully functional, Automatic Label and Sticker Roll Cutter Plotter VD 320 III Very lightly used The device is equipped with 4 cutting heads Integrated web guide roller system ensures precise web alignment throughout the entire cutting process Electromagnetic (powder) brake on both unwind and rewind units guarantees constant tension; electronic adjustment Cold lamination with adjustable film-to-web registration Capability to cut and separate into individual pieces Vacuum table for web splicing during roll change – minimizes material waste Matrix rewinder Touch screen TECHNICAL SPECIFICATIONS: Feeding type: roll-to-roll / optional guillotine for roll-to-sheet Max. knife working area: 320 x 400 mm Max. roll diameter: 450 mm Iijdpfexw Uqvjx Amgeh Roll width: 40–340 mm Label cutting speed: 6 m/min (for 10 x 10 cm size) – speed depends on label type and shape Slitting speed into bobbins: up to 80 m/min Cutting accuracy: 0.2 mm Supported file formats: PLT Bobbins width: 10–330 mm Supplied with manufacturer's software Compatible with graphic files from Corel Draw and Adobe Rotary blade type: tungsten steel Power supply: 1~, 230 V/50Hz Dimensions: 158 cm x 90 cm x 136 cm Machine weight: 450 kg

Condition: good (used), Year of construction: 2006, Turning diameter: 650 mm Turning length: 1,500 mm Total power requirement: 33 kW Center distance: 1,500 mm Swing diameter over bed: 650 mm Swing diameter in recess: 670 Turning diameter: 650 mm Turning length: 1,500 mm Total power requirement: 33 kW Center distance: 1,500 mm Swing diameter over bed: 650 mm Swing diameter in recess: 670 mm Swing diameter over face slide: 260 mm Face slide travel: 380 mm Main drive Drive power AC motor - 40/60/100% duty cycle: 33/27/22 kW Spindle box Spindle bore diameter: 106 mm Spindle diameter in front bearing: 140 mm Speed range (V constant): 1 - 2,000 rpm Cross slide Feed range, face: 0.001 - 1,000 mm/rev Feed range, face, optional up to: 5,000 mm/rev Feed range, longitudinal and thread pitch: 0.001 - 2,000 mm/rev Feed range longitudinal and thread pitch, optional up to: 13,000 mm/rev Feed force flat: 9,000 N Feed force longitudinal: 12,000 N Automatic tool turret Number of tool stations: 12 With tool drive for 6 stations Tool holder system (DIN69880) VDI40 Iisdpez N E Alofx Amgjh Equipment SIMENS SINUMERIK 840D sl (Shop Turn with manual functions) COMBI control station C-axis with drilling, milling, and engraving cycles Residual material detection and machining – during roughing and contour pockets MULTIFIX C forne setup Three-jaw chuck SMW AUTOBLOK: HI-GRIP HGF260-81-3 Oil emulsion mist filter for work area extraction: MAHLE LTA600

Year of construction: 2013, condition: excellent (used), Scheugenpflug DOS P016 Piston Dispenser Piston dispensing system DOS P for a wide range of requirements The piston dispensing systems from Scheugenpflug operate according to the principle of volumetric dispensing, meaning that the dispensed material volume is mechanically determined by the geometry and stroke of the associated cylinders. The cylinder is filled with the potting compound via the corresponding material feed system. When a two-component medium is used, the volume of the two cylinders simultaneously determines the ratio of the resin and hardener components to each other. The dispensing pistons push the two components simultaneously through separate channels towards the outlet valve, where they first mix into a homogeneous reactive medium in the static mixing tube. The DOS P016 / TCA piston dispensing systems are highly precise volumetric dispensing systems designed for processing 1K and 2K materials and cover a wide range of requirements. Precisely dimensioned dispensing cylinders enable the dispensing of reproducible material volumes. In the case of 2K materials, the parallel emptying of both cylinders into the common mixing tube creates a consistently constant mixing ratio at all times, thus ensuring the highest process reliability. At the same time, pressure-, moisture-, or shear-sensitive potting compounds can also be handled gently without any fear of material changes. Users also benefit from simple and fast maintenance, high uptime, and significantly reduced maintenance costs. With optional features such as valve monitoring, mixing tube heating, or dispensing head heating, these systems can be flexibly adapted to the respective application. Your advantages No dependence of dispensing accuracy on temperature, pressure, or viscosity Consistently constant mixing ratio at all times due to parallel emptying of the dispensing cylinders Wide range of applications (in terms of materials and applications) Important functions Simultaneous extrusion of the cylinders by a common drive mechanism enables a homogeneous mixing ratio Sensor-based monitoring of the inlet and outlet valves as well as the cylinder filling level Temperature control of the material via mixing tube heating (optional) Dispensing needle monitoring with camera (optional) Product data General Materials: 1K and 2K Viscosity: From liquid to highly viscous Fillers: Filled and/or abrasive media Operating principle: Volumetric dispensing Ijdpfx Aozc Npljmgsih Properties Constant mixing ratio for 2K Independent of temperature, material feed pressure, and viscosity of the casting resin Exactly reproducible and highly precise results Highest process reliability Application Potting, sealing, bonding, application of thermally conductive materials, encapsulation (Glob Top) DOS P016 Max. volume/shot 2K at ratio 1:1 1K: 0.06/17 ml 2K: 0.1/32 ml Dispensing speed max. 1 [ml/s]: 2 Dispensing accuracy at max. stroke [%]: < 0.5 Heatable up to max. 2 [°C]: 80 Outlets: 1K: 1-4, 6, 8 2K: 1-4 Weight: 14 kg Dimensions (W x H x D) 290 x 350 x 230 mm Video on how it works "Everything from one source: We will gladly offer you suitable bank financing for your project." More dispensers - new and used - can be found in our shop! International shipping costs on request!

Condition: used, Thermo Scientific   Thermo Scientific Forced Convection Drying Oven UT 6200 F with external temperature control unit Single STW150 temperature control system 85°C   Thermo Scientific Forced Convection Drying Oven UT 6200 F with external temperature control unit Complete laboratory temperature control and drying system   Description – Function & Application Iijdpfxjziy D Ej Amgjh   For sale is a professional temperature control and drying system consisting of:   Thermo Scientific / Heraeus Forced Convection Drying Oven UT 6200 F Single water temperature control unit STW 150/1-3-10-K5   The forced convection drying oven ensures uniform temperature distribution in the interior and is ideal for drying, heating, and tempering samples, components or materials.   The heating is carried out via the external water temperature control unit (external heater). This achieves a very stable, indirect, and material-friendly temperature control - without local overheating and with homogeneous heat distribution.   Typical applications:   Laboratory & Research Industry & Production Material testing / component drying Tempering, heating, drying at constant temperature Robust laboratory and industrial quality, reliable and durable.   Unit 1 – Forced Convection Drying Oven:   Manufacturer: Thermo Scientific / Heraeus Type: UT 6200 F   Technical data: Max. temperature: 85 °C Operating voltage: 230 V Frequency: 50 / 60 Hz Current consumption: 0.6 A Power: 0.14 kW Protection class: IP20   Dimensions & Weight (approx.) External dimensions: 895 × 816 × 715 mm Interior: 554 × 644 × 503 mm Volume: approx. 180 liters Weight: approx. 100 kg   Unit 2 – Water Temperature Control Unit:   Manufacturer: Single Temperiertechnik GmbH Type: STW 150/1-3-10-K5   Technical data: Heat transfer medium: Water Connection: 400 V / 3~ / PE / 50 Hz Current consumption: 6.9 A Heating power: 9 kW Apparent power: 4.7 kVA Max. temperature: 150 °C   Dimensions & Weight (approx.) Dimensions: 30 × 75 × 60 cm   Weight: 55 kg   Total:   Complete temperature control and drying system Operation together possible (external heating / external heater) Total weight: approx. 155 kg   Important note: "The table shown in the photos is not part of the sale."   Condition: used   Scope of delivery: (See image)   (Changes and errors in the technical data are subject to change!)   We will be happy to answer any further questions you may have by phone.

Condition: used, functionality: fully functional, 1400x1000x50 Approx. 2500 pieces. ASSYX DuroBOARD® are high-performance production pallets and support boards primarily used in the concrete block and paver manufacturing industry. Key Characteristics & Material • Composite Structure: Features an inner core of high-grade Laminated Veneer Lumber (LVL) or 3-layer glued timber (made from spruce, fir, pine, or beech), completely and inseparably sheathed in a Baydur® polyurethane coating developed in partnership with Covestro (formerly Bayer MaterialScience). Isdpfsz S H Syjx Amgjih • Durability: Treated as a long-term capital good rather than a quick-wear part, designed to match the lifespan of concrete block machines. • Weather & Water Proof: Completely waterproof, airtight, and resistant to UV light and weathering (can be stored outdoors). • Temperature & Chemical Resistant: Withstands temperatures from -25°C to +90°C (ideal for curing chambers and vapor systems) and resists both mineral and biodegradable oil release agents. • Vibration Transmission: Retains a constant E-module and uniform vibration transmission across the entire pallet surface over many years. This description serves solely for the general identification of the system and does not constitute a warranty in the legal sense. The seller assumes no liability for typographical and data transmission errors. The listed data may need to be verified separately. Subject to changes, input errors, mistakes, and prior sale.

Condition: ready for operation (used), Year of construction: 2008, Holzma automatic panel saw PROFI HPP 510/56/56/P Year: 2008 Technical data Positioning accuracy +/- 0.1 mm 5 air cushion tables, 2,810 x 650 mm 1 fan, adjustable pressure Cutting length: 5,600 mm Cutting width (pusher travel): 5,600 mm 11 combination profile rails, dual-track 9 clamps, two-finger type Max. cutting height: 125 mm Saw carriage feed (forward): 0.1 – 150 m/min Saw carriage feed (return): constant 150 m/min Pusher feed (forward/return): max. 90 m/min 11 combination profile rails, dual-track Max. forward speed of 25 m/min is mandatory within the EU Automatic pressure beam height control Main saw motor (frequency-controlled): 21 kW Speed: 1,700 – 4,200 rpm Scoring saw motor: 2.2 kW Operating voltage: 400 V / 50 Hz (+10 / -5%) Iiodpfjz Iliujx Amgsh Connected load: 30 kW Working height: 1,020 mm Main saw blade: 450 x 4.8 x 60 mm Scoring saw blade: 180 x 4.8 – 5.8 x 45 mm Compressed air: 6 bar Air consumption: 210 NL/min (approx., at extraction port) 30 – 32 m/s Negative pressure: 1,200 Pa Extraction volume: 5,800 m³/h Chip duct connection: 1 x 200 mm Pressure beam connection: 2 x 150 mm Quality standards: CE tested, GS tested, FPH dust-tested. Stock no.: 2003040BX

Condition: used, mileage: 406,015 km, power: 160 kW (217.54 HP), first registration: 11/2013, fuel type: diesel, overall weight: 11,990 kg, axle configuration: 2 axles, color: white, gearing type: mechanical, emission class: euro5, loading space length: 7,250 mm, loading space width: 2,480 mm, loading space height: 2,460 mm, Equipment: ABS, air conditioning, tail-lift, Mercedes-Benz Atego 1222 Flatbed & Tarp E5 Manual Transmission, Tow Hitch * Euro 5 * Leaf spring air suspension * Manual transmission * On-board computer * Air conditioning * Electric windows * Electrically adjustable and heated exterior mirrors * Roof hatch * Flatbed & Tarp Iijdoz Rtiiopfx Amgsh * L/W/H: 7,250 mm, 2,480 mm, 2,460 mm * Tail lift MBB 1,500 kg * Tow hitch, ball type 40 mm Special equipment: Storage compartment on engine tunnel, trailer brake 2-line, trailer coupling: towing hitch, trailer socket 24V / 15-pin, reinforced battery, battery 165 Ah, electric windows, graphic info display with eco-meter, rear lights for tail lift, fuel tank: 180 L plastic, standard air deflector, switch for tail lift Additional equipment: Emission standard EURO 5, axle configuration: 4x2, exterior mirrors electrically adjustable and heated, cockpit distributor, roof hatch (steel), cab: S (short), suspension: leaf / air, generator 80 A, transmission 6-speed - type: G 85-6, urea tank (AdBlue): 25 L, urea tank (AdBlue): plastic, rear axle H 4, crown wheel 368, interior filter: pollen filter, Atego 2 model update, engine 4.8 L - 160 kW diesel (OM 924 LA), engine brake with constant throttle, wheelbase 4760 mm, disc brakes, side impact protection, seats in cab: passenger single seat, fixed, seats in cab: driver's seat, standard suspension seat, immobilizer, permissible total weight 11.99 t Subject to prior sale and errors! Sale exclusively subject to our general terms and conditions (AGB). Important note – Important information: Despite careful checking of all details in our offer, errors may occur. These are sometimes caused by transmission errors in the systems of the various platform providers. Therefore, we would like to point out that all information is provided without guarantee and does not constitute a legal claim. Legal information: This sales advertisement does not constitute an offer within the meaning of Section 145 of the German Civil Code (BGB). Rather, it is information for the purpose of initiating a contract. The information provided here is without guarantee and therefore does not constitute guaranteed characteristics.

Condition: used, functionality: fully functional, W-KRONEN HP10 LT500 compressed air compressor with integrated Aerotec compressed air refrigerant dryer Aerodry PRO 1000 For sale is a W-KRONEN HP10 LT500 compressed air compressor with an integrated Aerotec compressed air refrigerant dryer Aerodry PRO 1000. This high-quality complete system provides reliable and efficient compressed air supply for workshops, craft businesses, and industrial applications. The integrated refrigerant dryer effectively removes condensate from the compressed air, reducing corrosion, moisture damage, and failures of compressed air tools. The powerful 10 HP motor, with an intake capacity of 1,100 l/min and a delivery rate of approximately 950 l/min, ensures sufficient compressed air even under demanding conditions. The 500-liter compressed air tank guarantees a high reserve capacity and a constant working pressure of up to 10 bar. Technical data • Tank volume: 500 liters Iodpfsz Iykysx Amgjih • Max. operating pressure: 10 bar • Intake capacity: 1,100 l/min • Delivery rate: 950 l/min • Motor power: 7.5 kW / 10 HP • Speed: 1,200 RPM • Connection: 400 V / 50 Hz, 16 A • Integrated Aerotec refrigerant dryer Aerodry PRO 1000 • Compressed air treatment for dry and high-quality compressed air

Condition: good (used), Year of construction: 2019, functionality: fully functional, X.mill M640 Eco machining center with Si 808D Advanced TTL Table dimensions 750 x 360 mm Table load capacity 500 kg T-slots (number x width x spacing) 3 x 18 x 100 mm Distance from spindle nose to table 80 - 580 mm Travel ranges X / Y / Z: 640 / 400 / 500 mm Main spindle spindle speed 10,000 rpm Main spindle spindle overhang 430 mm Main spindle spindle taper BT 40 Rapid traverse X / Y / Z 36,000 / 36,000 / 24,000 mm/min Feed rate Working feed rate X / Y / Z 10 - 12,000 mm/min each Iiedpfx Asz Iw Naemgsh Number of tool positions 12 Tool diameter 55 (101) mm Tool length (max.) 200 mm Tool weight (max.) 8 kg Tool change time chip to chip 9 s Tool change time tool to tool 7 s Positioning accuracy ± 0.01 mm Repeatability accuracy ± 0.005 mm Main drive 11 kW Main drive, constant load 7.5 kW Dimensions (L x W x H) approx. 2.3 x 1.8 x 2.3 m Weight 4,200 kg The machine can be inspected under power by arrangement.

Condition: good (used), Year of construction: 2019, functionality: fully functional, Siemens control system 808D MM+ Working area Swinging diameter over bed (max.) 500 mm Swinging diameter over support 300 mm Workpiece length 2,000 mm Turning length (max.) 1,700 mm Travel distances X-axis 270 mm Z-axis 1,900 mm Main spindle Speed range 60 – 2,000 rpm Spindle mount A2-8 Chuck diameter 250 mm Spindle bore with draw tube 70 mm Rapid traverse X-axis 6,000 mm/min Z-axis 8,000 mm/min Tool carrier Number of tool positions 8 Iisdpfx Amsz Hmz Aogsh Accuracy Positioning accuracy X / Z ± 0.012 / ± 0.016 mm Repeatability X / Z ± 0.01 / ± 0.014 mm Tailstock Tailstock taper MK 5 Quill diameter 75 mm Quill stroke 150 mm Drive power Main drive 18.5 kW Main drive, constant load 15 kW Torque drive X / Z 10 / 15 Nm Coolant pump 0.125 kW Dimensions and weights Dimensions (L × W × H) approx. 4.12 × 1.75 × 1.84 m Weight 3,600 kg The machine can be inspected under power by arrangement.