Used Ct Pad Printer W/ Servo for sale (37,001)

Condition: good (used), Control card, output card, control -Manufacturer: Servomac -Type: CT 136 -Number: 1x tax card available -Dimensions: 20/165/H130 mm -Weight: 0.14 kg Lodpfjcc Aqrox Ammjac

Condition: good (used), Control card, output card, control -Manufacturer: Servomac -Type: CT 057C -Number: 6 control cards available -Price: per piece Lodpfxocc Aqbj Ammoac -Dimensions: 20/165/H130 mm -Weight: 0.14 kg/piece

Condition: used, Control card, output card, controller -Manufacturer: Servomac Lsdjcc Enyjpfx Ammsac -Type: CT 104D -Number: 2x control cards available -Price: per piece -Dimensions: 215/220/H55 mm -Weight: 2.3 kg

Condition: used, Control card, output card, controller -Manufacturer: Servomac Laedpjcc Apyjfx Ammsc -Type: CT 134A -Number: 2x control cards available -Price: per piece -Dimensions: 20/165/H130 mm -Weight: 0.14 kg

Condition: used, Control card, output card, controller -Manufacturer: Servomac Lasdpfjcc Ap Aex Ammec -Type: CT 107B -Number: 2x control cards available -Price: per piece -Dimensions: 20/165/H130 mm -Weight: 0.14 kg

Condition: used, Control card, output card, controller -Manufacturer: Servomac -Type: CT 166 -Number: 2x control cards available Lajdpfx Aecc Apzsmmoc -Price: per piece -Dimensions: 20/165/H130 mm -Weight: 0.14 kg

Condition: used, Control card, output card, controller -Manufacturer: Servomac -Type: CT 137A -Number: 2x control cards available -Price: per piece -Dimensions: 20/165/H130 mm -Weight: 0.14 kg Lasdscc Ap Dspfx Ammec

Condition: used, Control card, output card, controller -Manufacturer: Servomac -Type: CT 112A -Number: 2x control cards available Lsdpfx Aecc Enzemmjac -Price: per piece -Dimensions: 130/290/H50 mm -Weight: 1.1 kg

Condition: used, PSW Industrial Spray Booths / Paint Line with Conveyor, Extraction & Wash Chamber – Used Description: A substantial PSW industrial spray booth / paint spray line system, suitable for coating, spraying and finishing applications. The installation includes enclosed blue spray booth sections, overhead conveyor track, extraction/ventilation units, ducting, filtration and wash chamber equipment. This is a robust, heavy-duty industrial setup formerly used in a production environment. PSW Spray booths system includes associated air handling/extraction equipment, control panels, compressed-air filtration/regulation, spray area sections and conveyor hangers. The system would suit a buyer looking for a complete used spray booth installation for refurbishment, relocation, spares, or re-commissioning subject to inspection and compliance checks. Key features: PSW Spray booths industrial spray booth system Enclosed booth sections with access/opening points Overhead conveyor rail with multiple hanging brackets Extraction / ventilation units and ductwork included Wash chamber section Air filtration / compressed air regulation equipment Control panels and gauges present Large-capacity industrial construction Suitable for paint, coating or finishing operations Available for removal from site Details: Manufacturer: PSW Spray booths Type: Industrial spray booth / spray line system Water wash / washing chamber indicated Tank capacity plate show approximately 900 litres Spray booth number 051479 Rinse aid solution Ledpfx Asy Rflyjmmoac Condition: Used industrial equipment. The booths are currently installed and complete, but they have been idle and should be inspected by the purchaser. There are signs of normal industrial use, overspray, paint wear and age-related cosmetic marks. Sold as seen, with no warranty implied unless otherwise agreed.

Condition: good (used), Year of construction: 1989, operating hours: 64,136 h, Centre height: 350 mm Turning length: 1000 mm Max. swing diameter over bed cover: 600 mm Max. swing diameter over cross slide: 360 mm Spindle bore: 107 mm Speed range: 16 – 3150 rpm Feed range longitudinal & face: 0.5 – 5000 mm/min Rapid traverse longitudinal & face: 9 m/min Main drive: 30 kW Dimensions of machine with chip conveyor (L x W x H): 5400 x 2200 x 2000 mm Weight: 6400 kg Accessories / Special features: • CNC control GILDEMEISTER EPL 2 with TFT display General description: CNC manual input control system with program entry via function and numeric keypad. All information is entered in dialogue with the screen. Integrated menu technology with plain text display of all functions. Operator keypad, display, and electronic handwheel located within a separate chip guard housing. The EPL control offers the following capabilities: • Direct interactive program entry and editing by the operator through the EPL control without manual technological preparation • NC programs in ISO/EIA format can be entered, output, or manually keyed in via the RS 232 serial interface Machining cycles: • Removal cycles for longitudinal, facing, and contour turning, including with allowance • Thread cutting • Undercuts as per DIN 509-Form E and F and DIN 76; grind stock programmable Lsdjvr Eh Eepfx Ammjac • Axial and radial grooves as per DIN 471 and 472, including bottom finishing • 90° radii and 45° chamfers • Automatic cutter radius compensation for cycles, undercut, groove, radius, chamfer Programming: • Block-orientated, metric/inch, diameter for absolute entry, radius for incremental entry • Full circle programming, subroutine technology, hide levels for program sections, zero point offset, mode selection via menu Program entry and output: • Interactive via guided menu or direct in dialogue • Hydraulic 3-jaw chuck Ø 315 mm with through spindle bore Ø 80 mm • Hinged chip conveyor • 12-position tool turret VDI 40, 6 standard stations + 6 driven tool stations • Coolant system • RS 232 interface • Electronic handwheel • Electric foot switch for 3-jaw chuck and tailstock quill • Lighting • 12 various standard toolholders (to be finalized on site) Overhauled servo drive for main spindle, 06/2025 Siegfried Volz Werkzeugmaschinen Rüschebrinkstr. 151-153 DE - 44143 Dortmund - Wambel

Condition: used, functionality: fully functional, machine/vehicle number: G7000046, Year of construction: 2021, operating hours: 12,000 h, Stratasys Objet500 dental printer Purchased in July 2021. Original price: €87,500 Regular maintenance performed by Stratasys. Maintenance reports available. Excellent condition, fully functional. All print heads are installed in the printer and are functional. Machine ready for pickup. Lajdpfx Ajzd Ruqemmec

Condition: used, functionality: fully functional, machine/vehicle number: G7000034, Year of construction: 2021, operating hours: 12,000 h, The printers were purchased in July 2021, original price: €87,500. Regular maintenance was carried out by Stratasys. Reports are available. The printers are in top condition and fully functional. All print heads are present and in good condition. The printers are ready for collection. Ljdpfx Ajzd Rtajmmsac

Condition: used, machine/vehicle number: 15464, Year of construction: 1990, load capacity: 1,300 kg, lifting height: 2,600 mm, load center: 600 mm, construction height: 1,870 mm, fork length: 1,150 mm, enginetype: Diesel, manufacturer: OM Lajdpfexz Sn Tox Ammjc

Condition: used, mileage: 153,000 km, power: 70 kW (95.17 HP), first registration: 12/1992, overall weight: 3,200 kg, fuel type: diesel, color: red, next inspection (TÜV): 12/2025, gearing type: mechanical, Year of construction: 1992, total length: 5,345 mm, total width: 1,975 mm, total height: 2,680 mm, number of seats: 9, Equipment: had accident, parking heater, Original German vehicle. In service with a small municipality until 2026, initially used by the fire brigade and then by the municipal works department. This vehicle has civilian truck registration as a "box body truck" and is officially rated for 9 seats in the registration papers. The vehicle was originally operated as a multi-purpose vehicle (MZF), and afterwards was used to transport the municipality’s lawn mower. Only 1 bench seat is permanently mounted. 2 of the 3 bench seats were not used in recent years and are included loose. The original seat belts and mounting bolts are also supplied. A fold-out table with a radio handset is still installed on the left side, and a genuine large fire brigade first aid kit is integrated into the fit-out. OM 602 engine, 5-cylinder naturally aspirated diesel with 2874 cc. The engine always starts perfectly and runs cleanly at first, but after about 20 seconds at idle the running characteristics at idle worsen significantly and smoke develops. Once warmed up, the smoke subsides and the engine runs cleanly again, almost normally. The engine is either heavily worn or there is engine damage. No precise diagnosis so far. The vehicle drives immediately and functions well; typical engine power was fully and consistently available during a brief test drive, but we do not guarantee roadworthiness. A repair is certainly necessary in the near term! For driving short distances or boarding a RORO ship at port under its own power towards Africa, this 310 D appears completely unproblematic. 5-speed manual transmission. Lodpfx Amoyx N Hqemeac 127 km/h top speed. Tow hitch (ball head) with a braked trailer load of 2,000 kg or 750 kg unbraked. Power steering. Factory-installed auxiliary heater Mercedes/Eberspächer (working). Bodywork has isolated rust spots; overall, due to years of storage indoors, the vehicle is still in comparatively good condition. The passenger door window is broken and covered with a film. The paint below has previously been touched up in black. The vehicle clearly received very good maintenance while with the fire brigade—unfortunately, this was not maintained afterwards. Opening the sliding door mechanically deploys a large step. Unladen weight: 2,370 kg. Gross vehicle weight rating: 3,200 kg. External overall vehicle dimensions: Length 5,345 mm / Width 1,975 mm / Height 2,680 mm. The tires (205R14C) are from 2013 and not cracked, tread depth approx. 50-60%. The vehicle is primarily intended for export or for genuine fans of the Bremen transporter who are looking for a completely unvarnished basis for restoration. MOT expired 12/2025, will not be renewed. We do not have our own workshop. We have deliberately priced the vehicle attractively, as genuinely good comparable vehicles are now usually being traded for double or even higher prices. A personal inspection is highly recommended due to the defects and can be arranged by appointment. This offer is only valid for businesses, freelancers, and public authorities of any kind. Sale to private end users is strictly excluded. Subject to prior sale and errors. The purchase price is gross = net, with no VAT incurred (according to §25a of the German VAT Act / margin scheme).

Condition: new, Year of construction: 2026, Universal Milling Machine UWF120 SERVO with Independent Spindle Drive: Exceptional Machining Flexibility Our Universal Milling Machine UWF120 SERVO is an innovative solution for a wide range of milling operations. Servo motors on the X, Y, and Z axes, along with an independent vertical spindle drive, enable precise milling at various angles. The handwheel for accurate tool positioning and smooth movement makes operation intuitive and efficient. Its solid and heavy-duty construction ensures stability even during demanding machining tasks, while guaranteeing long-lasting machine life. Machine characteristics The cast-iron body ensures vibration-free operation, contributing to high machining accuracy. Protective covers in accordance with the latest safety standards ensure safe operation. Schneider Electric electronics and SERVO drives guarantee not only machining precision but also operational safety. The digital display and ergonomic control panel make the milling machine easy and intuitive to operate. Technical data Maximum face milling cutter diameter 25 mm Table dimensions 1500x320 mm Table travel X/Y/Z 1000/320/340 mm Distance from spindle face to table 90–430 mm Distance from horizontal spindle axis to table –130 to 300 mm Distance from spindle axis to column 400–800 mm T-slot width, spacing, and number 14 mm / 70 mm / 3 pcs Spindle speeds 45–1660 (V–11) rpm 34–1320 (H–12) rpm Table feed Ljdpfxjzfgf Uo Ammeac 25–595 mm/min (8) Spindle taper ISO40 Supply voltage 400V Motor power 2.2kW (V); 3kW (H) Weight 2,100kg Overall dimensions (LxWxH) 1630x1700x1950 mm Standard equipment: 3-axis digital readout Servo drive ISO40 toolholder with ER32 collets 4, 5, 6, 8, 12, 14, 16 Reduction sleeve ISO40/MK4 Reduction sleeve ISO40/B16 Drill chuck 3–16 mm B16 Vice 160 Lighting Cooling system Central lubrication system Feed for X, Y, Z axes Tool set User manual CE Declaration of Conformity

Condition: ready for operation (used), Fanuc A06B-6096-H106 Servo Amplifier Module Version: F SN:EA9623614, professionally completely overhauled and tested with 12 months warranty, 100% functional, delivery as per photographs. The agreed sales discounts do not apply to this item. Please inquire about the price separately! Ledpfxex Erche Ammsac

Condition: ready for operation (used), Siemens 6SL3210-5HE15-0UF0 S210 Servo Drive Version: 03 SN: T-P76031605, mint condition, never in operation, 100% functional, scope of delivery as shown in photos. The agreed sales discounts do not apply to this item. Please inquire separately for the price! Ledpfx Aoxahbtjmmsac

Condition: ready for operation (used), Fanuc A06B-6079-H106 Servo Amplifier Module – without cover and nameplate, professionally fully overhauled and tested with 12 months warranty, used, minor signs of wear, 100% functional, scope of delivery as per photos. The agreed sales discounts do not apply to this item. Please inquire about the price separately! Lodpex Dwm Tjfx Ammeac

Condition: ready for operation (used), Fanuc A06B-0268-B100 AC servo motor SN: C01XA3923 with A860-2000-T301 pulsecoder, used, in as-new condition, 100% functional, scope of delivery as shown in the photos. Ledpfxjy Nn Uno Ammeac

Condition: ready for operation (used), Fanuc A06B-0266-B100#0100 AC servo motor, serial number as shown in the photo. Professionally and completely refurbished and tested, with a 12-month warranty. 100% functional. Scope of delivery as shown in the photos. The agreed-upon sales discounts do not apply to this item. Please request the price separately! Ledpfx Asi D Hz Ssmmjac

Condition: ready for operation (used), Fanuc A06B-0273-B100#0100 AC servo motor, serial number as shown in the photo. Professionally and completely overhauled and tested, with a 12-month warranty. 100% functional. Scope of delivery as shown in the photos. The agreed-upon sales discounts do not apply to this item. Please inquire about the price separately! Laodpfxoi D H Ato Ammjc

Condition: ready for operation (used), Indramat TVM 2.1-50-220/300-W1-220/380 AC. Servo power supply, serial number as shown in the photo, used, professionally and completely overhauled and tested, with a 12-month warranty, 100% functional, scope of delivery as shown in the photos. Ljdpfx Amsi Ebrgomsac

Condition: new, Indramat DDC1.2-N200A-DL01-01-FW servo drive, unused, in opened original packaging, 100% functional. Lsdsi Ebd Topfx Ammjac

Condition: ready for operation (used), Indramat TVM 2.1-50W1-220V A.C. servo power supply, used, shows normal signs of wear and tear, 100% functional. Ljdei Ebrkopfx Ammsac

Condition: ready for operation (used), Fanuc A06B-0223-B100 AC servo motor, serial number: C159W03B5, without pulsecoder / Speed: 4000 rpm, 267 Hz, used, in good condition, 100% functional, scope of delivery as per photos. Lasdpfx Aoy Nn Ubommec