Used Cv-Tek - Cvp Systems Bulk Gas Flushing Machine for sale (86,213)

Year of construction: 2017, condition: reconditioned (used), functionality: fully functional, machine/vehicle number: MAXI 91-2, The machine has been thoroughly inspected by IBS, and the pump has been newly sealed. Current pictures to follow. Easy operation thanks to a fully automatic cleaning process, allowing skilled personnel to focus on other important tasks. The wash tank is filled with a mixture of water and soluble IBS special cleaner (washing solution). Contaminated parts to be cleaned are placed in the rotating wash basket and the lid is closed. After setting the desired washing temperature and time, the device is switched on and the solution in the tank is heated. Inside the closed machine, the basket rotates at a constant speed around its own axis. The pump units draw the cleaning solution from the wash tank and distribute it via six stainless steel spray pipes with overlapping flat spray nozzles. The parts to be cleaned are intensely sprayed with the hot solution from all sides during the steady rotation of the motor-driven basket. Once the cleaning cycle is finished, the device shuts off automatically. Advantages - 2 pumps arranged horizontally - 6 three-dimensionally arranged stainless steel spray pipes - Robust stainless steel construction - Additional small parts cleaning basket made of stainless steel (diameter 170 mm) - Rotating stainless steel wash basket, V-belt drive with a separate motor - Steam extraction - Stainless steel perforated screen with filter basket above the wash tank - Low water level safety device - Individually height-adjustable feet Technical Data Capacity of immersion tank/basket: 190 l Diameter of immersion tank/basket: 910 mm Load capacity: 200 kg (optional 300 kg) Temperature min. - max.: 0-60 °C Nlsdpfx Adeudz D Usrod Working height: 500 mm Dimensions (W x D x H): 1310 x 1160 / 1350 x 1285 / 2000 mm Weight: 150 kg Heating output: 6 kW Spray rate: 2 x 6,600 l/h Material: Stainless steel Electrical connection: 8 kW / 400 V / 50 Hz Pump pressure: 2.5 bar

Condition: used, Year of construction: 2012, operating hours: 2,795 h, functionality: fully functional, machine/vehicle number: 21214714, type of input current: three-phase, sheet thickness (max.): 40 mm, sheet thickness steel (max.): 150 mm, sheet thickness aluminum (max.): 40 mm, input voltage: 230 V, cutting speed: 2,000 mm/min, table height: 700 mm, workpiece weight (max.): 30,000 kg, table length: 12,950 mm, table width: 2,700 mm, input frequency: 50 Hz, Equipment: documentation/manual, We offer this used ESAB COMBIREX DX 3500 gas and plasma cutting machine, manufactured in 2012. Nledszc Hn Ejpfx Adrod Type: COMBIREX DX 3500 Machine No.: 21214714 Year of Manufacture: 2012 If you have any questions or require further information, please contact us by email or phone.

Condition: used, Year of construction: 2016, measuring range X-axis: 300 mm, measuring range Y-axis: 250 mm, measuring range Z-axis: 150 mm, Coordinate measuring device for simple inspection of components directly on the production floor. Measurement routines can be visually displayed step by step for untrained operators. The device was purchased in 2016 but was used only briefly as it proved unsuitable for the intended application. It is in nearly new condition and comes in its original packaging. Nledjzbvqyjpfx Adrsd Manufacturer: Keyence Model: XM-1000 Year of Manufacture: 2016 Measuring range: 300 x 250 x 150 mm Repeatability: ±3 µm Measurement deviation: ±8 µm Equipment: - XM-1000 measuring system - XM-1500 measurement computer - XM-P1000 measuring probe - Several probe heads / balls - Documentation - Original packaging

Condition: used, functionality: fully functional, This is a round filter coffee machine, a Bravilor Bonamat B20 HW. This coffee machine is ideally suited for supplying coffee in large establishments during peak times, such as care facilities, catering businesses, company canteens, etc. The B HW series is equipped with a separate hot water tap. Nledpfx Adjzbk Sxjred The containers are easy to transport. The machine has undergone a major inspection in our in-house workshop and is fully functional. It has only been operated with a water softener, so there are no limescale residues in the system. The matching drip tray for dispensing coffee is not shown in the picture, but it is also included. The base cabinets shown in the picture are not included in the offer, but can be purchased as an option. You will receive an invoice with VAT shown. Our used equipment service for you: 6 months warranty on all electrical parts, limited to the replacement of defective parts, without installation and removal costs High-quality brand-name equipment at fair prices Professional overhaul/inspection & expert cleaning Tested & fully functional - or your money back Flexible choice of shipping or self-collection Competent advice - before and after purchase Provision of operating instructions, connection diagrams & spare parts Inspection according to DGUV V3 seal Technical data: W x D x H: approx. 1173 x 600 x 947 mm Design with 1 brewing system and 2 containers Separate hot water tap With sight glass Coffee brewing unit Peak capacity: 40 liters Hourly output: approx. 90 liters Brewing time: approx. 14 min. / 20 liters Hot water unit Peak capacity: 4.6 liters Hourly output: approx. 20 liters Frequency: 50/60 Hz Voltage: 400 V 3 N Connection value: 11.2 kW Further details: 1 brewing column in the center 1 coffee container on the right and left, removable With hot water outlet: Coffee is kept warm in a container Audible signal at the end of brewing With timer Digital display Total and daily counters Descaling system Stainless steel housing Fixed water connection Condition: Used, major inspection performed, fully functional Shipping: Delivery or self-collection by arrangement Worldwide shipping on request Shipping to islands or mountain stations only by arrangement Subject to changes and errors Do you have any questions, would you like to receive advice or would you like to see something on site? You can reach us by telephone during our opening hours: Monday to Friday from 9:00 a.m. to 1:00 p.m. and from 2:00 p.m. to 5:00 p.m. The sale is made exclusively according to our general terms and conditions (GTC).

Condition: ready for operation (used), functionality: fully functional, total length: 5,000 mm, film width: 550 mm, product height (max.): 200 mm, product width (max.): 400 mm, product length (min.): 80 mm, Equipment: documentation/manual, Shrink wrapping machine Manufacturer: Hugo Beck Nedjyw H Rkspfx Adreld Type: Flexo 500 S Horizontal flow wrapping machine with side sealing for tubular film, consisting of a wrapping machine and a subsequent shrink tunnel. The Flexo 500 tubular film machine boasts the highest degree of variability and flexibility. Whether for frozen pizzas, biscuit boxes, fruits and vegetables, books, skis, laminate flooring, or various household products, etc. – with this machine, you can quickly adapt to any application, for example, for daily changing orders. - Wrapping machine Hugo Beck Flexo 500 S, year of manufacture 2003 Workpiece dimensions: Width approx. 55 - 400 mm Height approx. 2 - 200 mm Length from min. approx. 80 mm to theoretically unlimited Consumable/film: half-tube, PE, PP Roll diameter: 350 mm Film width: 550 mm Feed rate approx. 20 m/min. Rated voltage 400/230 V, 50 Hz, 3 phases Rated current 5 A Connected load 3 kW Machine dimensions approx. 2500 x 1500 mm L x W Weight approx. 650 kg - Shrink tunnel Hugo Beck Type HV 601, year of manufacture 2002 Working width approx. 600 mm Clearance height approx. 300 mm Feed rate continuously adjustable Chain slat conveyor, silicone-coated transport slats Temperature control via electric thermostat, separately adjustable lower and upper heat Heating approx. 4 - 12 kW Rated voltage 230/400 V, 50 Hz, 3 phases Rated current 19 A Connected load approx. 12 kW Machine dimensions approx. 2500 x 1100 mm L x W Weight approx. 400 kg

Condition: excellent (used), Year of construction: 1999, 1 used, very good condition water-cooled multi-function system with MIG/MAG pulse and standard welding, MIG brazing, stick electrode welding … Manufacturer: DALEX, Made in Germany Model: VARIO MIG 400 L(W)/DV 36 L(W) Year of manufacture: 1999 Nlsdsyrgu Rspfx Adrod This multi-function system is characterized by the following welding technologies: • Easy operation • Multi-function display • Various welding processes can be selected: o MIG/MAG o Pulse o ALU o MIG brazing o Stick electrode welding • Reduction of operating costs by 30% Technical data: Welding current range, stepless 10 - 400 A Duty cycle 100% 315 A / 30 V Duty cycle 60% 400 A / 34 V Primary voltage: 3 x 400 V Dimensions L x W x H approx. 1030 x 480 x 1300 mm Total weight approx. 125 kg Accessories / Special features: • Water cooling • Separate wire feeder DALEX DV-36 L(W) with 4-roller wire feed • Hose length 3 m • Pressure reducer • Ground cable • Chassis • Cylinder holder • CE compliant Siegfried Volz Werkzeugmaschinen Rüschebrinkstr. 151-153 DE - 44143 Dortmund - Wambel / Germany

Year of construction: 2007, condition: excellent (used), We offer a complete Laser marking machine: - DOMINO DSL1 laser - Cabin according to protection class 1 - axis for rotation - conveyor belt - computer the tipe of laser: DOMINO DSL1 10-60 Laser power: 10 W. Lasertype: closed CO2 laser, 30000 hours medium failure-free time Characters per second: 400 (depending on the product material and system configuration) character height: 0,5 - 120 mm (0,02 - 119,89 mm) focal length: 100 mm (208 mm optional) Nsdpfx Adjd N Hgusreld labeling field: 60 x 60 mm Font: Pseudo-True Type laser head: construction made of stainless steel and aluminum operating temperatur: 15 - 38 C cooling: air Dynamark-Software The following materials can be marked by a CO2 laser: - Painted or coated metals - Glass - ceramics - Carton - Different types of plastic

Condition: used, High-quality mushroom cultivation facility with various machines for sale due to business closure! Stainless steel conical mixer, 6000 L capacity, including a platform for cleaning or inspecting the contents from above. Protected drive from below, including a complete spare drive unit. Price: €9,999 net Two air conditioning units with control systems: 1. Air conditioning unit for cleanroom technology with 5 filter stages. Price: €2,990 net 2. Air conditioning unit for the cultivation room. Price: €1,990 net Two high-pressure humidification systems, 125 bar, with numerous accessories. Price: €2,990 net/unit. Mobile cooling unit – 25 kW output, in 2 power levels. Price: €1,990 net Nedsy Tlikopfx Adrold Furthermore, various accessories: Blue multi-boxes in various designs, asparagus boxes, plastic boxes 60x40 cm, etc. Various electric chain hoists, e.g., from Demag. Various fans, e.g., with integrated water atomization. Note: The air conditioning units and stainless steel mixer are still in working order and can be demonstrated! The machines are in used condition, without any warranty! Shipping: Collection only! We are happy to provide further information.

Condition: used, Impulse shielding gas welding machine REHM type RMP 400 Hybrid (REHM-Mega-Puls) Pulse welding unit with inverter welding power source Serial no. Year of manufacture 1998 Nlsdpfx Aowa Uwdsdred Power output 400 Amps = 60% duty cycle 320 Amps = 100% duty cycle Continuously adjustable range Mains connection 400 Volt, 50 Hz, 32 Amp plug - separate 4-roller wire feed unit with connecting hose package meters - digital display for voltage and current - pulse welding function with single and double pulses - 2-stroke and 4-stroke welding function - 4 meter Binzel hose package with central connection - water-cooled - shielding gas pressure regulator - MIG/MAG pulse arc welding - MSG double pulse welding - MIG/MAG welding Space requirement L x W x H 1150 x 510 x 1350 mm Weight 200 kg good condition

Condition: used, WIDMANN automatic film unwinder, film unwinder Rewinder and unwinder, unwinder, rewinder, winding machine, roll winding machine, roll unwinding machine Nsdpfsud U Sfjx Adrold Unwinder with deflection rollers and film guide system Unwinder with deflection rollers for constant strap tension Year of construction approx. 2000 Roll width - coil width max. 400 mm Material width max. 400 mm Deflection rollers Ø 80 mm Deflection roller width 430 mm Roll weight - coil weight max. 150 kg Expansion shaft for cardboard core with inner diameter Ø 76 mm (inner coil diameter) Roll outer diameter - coil outer diameter max. 600 mm Interference circle with rotation of the film reel max. Ø 800 mm Reel shaft speed approx. 70 rpm Motor power - drive of the film reel 0.37 kW Mains connection 400 Volt, 50 Hz - Constant belt tension, winding tension via film accumulator with deflection rollers and vacuum shaft - Pick-up shaft with chuck for large rolls with cardboard core inner Ø 76 mm - 8 deflection rollers for film accumulator with constant winding tension, bearing via precise linear guide - Gear motor LENZE with brake to drive the film roll (0.37 kW) - Electrical system not ready for operation, see pictures Space requirement L x W x H approx. 1000 x 1000 x 1900 mm net weight 360 kg good condition

Condition: used, WIDMANN automatic film unwinder, film unwinder Rewinder and unwinder, unwinder, rewinder, winding machine, roll winding machine, roll unwinding machine Unwinder with deflection rollers and film guide system Unwinder with deflection rollers for constant strap tension Year of construction approx. 2000 Roll width - coil width max. 400 mm Material width max. 400 mm Deflection rollers Ø 80 mm Deflection roller width 430 mm Roll weight - coil weight max. 150 kg Expansion shaft for cardboard core with inner diameter Ø 76 mm (inner coil diameter) Roll outer diameter - coil outer diameter max. 600 mm Interference circle with rotation of the film reel max. Ø 800 mm Reel shaft speed approx. 70 rpm Motor power - drive of the film roll 0.37 kW Motor power - drive of the flat film into the vacuum shaft 0.25 kW Mains connection 400 Volt, 50 Hz - Constant belt tension, winding tension via film accumulator with deflection rollers and vacuum shaft - Pick-up shaft with chuck for large rolls with cardboard core inner Ø 76 mm - 8 deflection rollers for film accumulator with constant winding tension, bearing via precise linear guide - LENZE geared motor with brake to drive the film roll (0.37 kW) - LENZE geared motor with brake to drive the flat film into the vacuum shaft (0.25 kW) Nlsdsu H R Iqjpfx Adrod Space requirement L x W x H 1900 x 1300 x 1900 mm net weight 580 kg Good condition

Condition: not inspected (used), functionality: unexamined, We are selling a used gas console that was previously used in an Eltropuls plasma nitriding system. Nljdpfx Aey Sxtgedrjd Included are 4 Bronkhorst mass flow controllers (MFCs) and other control electronics. We acquired these specific components as part of a package with other items, but we do not need them. Therefore, the components are offered here, untested, as a source of spare parts for interested parties.

Condition: ready for operation (used), Year of construction: 2011, functionality: fully functional, operating hours: 1,651 h, workpiece height (max.): 60 mm, edge thickness (max.): 3 mm, feed rate X-axis: 25 m/min, HOMAG KAL 310 + panel return system TFU 140! TECHNICAL DETAILS Profile milling unit FK11 manual Edge thickness: max. 3 mm Motors: 2 units Motor power: 0.4 kW per motor Frequency: 200 Hz Speed: 12,000 rpm Feed speed: max. 20 m/min Feed speed for continuous trimming without profile trimming: max. 30 m/min Panel length single-sided: min. 240 mm Panel length double-sided: min. 120 mm Panel thickness: 12 - 60 mm Panel spacing with PC22: min. 500 mm Minimum workpiece gap for workpiece thickness over 22 mm: min. 600 mm Multi-scraper MN21 Automatic Number of profiles: max. 5 different profiles Edge thickness: max. 3 mm Panel thickness for radius R = 3 mm: min. 13 mm Panel thickness for bevel 0.5 x 45°: min. 10 mm TC knives: 2 units Bevel angle: 20° Radius: R = 1.5 / R = 2 / R = 3 / R = 5 Pre-milling unit BF10 Motors: 2 units Motor power: 0.55 kW per motor Frequency: 200 Hz Speed: 12,000 rpm Swivel range: +/- 1° TC cutter: 70 x 25 mm HSK: 25 Cutting angle: 54° Feed speed: 18-25 m/min Workpiece thickness: 8-60 mm Edging material (roll): 0.3-3 mm MACHINE DETAILS Operating hours Operating hours: 6,358 h Feed time: 1,651 h Nedpfx Ajyzxa Eodrsld EQUIPMENT Pre-milling Automatic adjustment of the infeed fence Infeed device with 2 rollers Quickmelt application station 2-roller magazine infeed Automatic adjustment of the pressure zone HL84 end trimming unit with pneumatic adjustment BF10 flush milling unit with pneumatic adjustment FK11 profile milling unit MN21 multi-profile scraper unit for 5 different profiles Grooving unit Glue joint scraper Buffer Return system TFU140

Year of construction: 2000, condition: excellent (used), 1 x Parts Cleaning System Malmkvist Turbex 2000 Year of manufacture: approx. 2000 with heating 3 selectable programs: - Washing + drying - Washing - Drying Wash and dry times are adjustable. In very good condition. Technical data: Max. load weight: 20 kg Drum diameter: 400 mm Drum length: 500 mm Heating capacity: 6 kW for dry air blower as well as washing medium Temperature adjustable 0 - 80 degrees Njdpfx Adjy I Nr Esreld Accessories: 3 x washing baskets with three different hole diameters (1.5/2.5/5 mm) + Rack (homemade) 1 x roller conveyor with loading/unloading chute Operating manual + wiring diagrams The machine can be inspected under power.

Condition: new, Year of construction: 2026, Semi-automatic dosing-packing machine for nuts, seeds, sweets, confectionery, fertilizers, grains, coffee and other dry bulk products into pre-made packages (Doy-pack, block-bottom, gusset and others) Nodpeic Rmaofx Adrold Specifications: • The dosing range - from 50gr. up to 2000gr. • Continuous thermo-sealing device with adjustable speed and temperature • Capacity up 10pack./min. (depending on product and operator pace) • Control - color touch screen, multilingual menu • Supply voltage - 220V; 50Hz, 1kW • CE – certified, made in Lithuania (EU)

Condition: used, functionality: limited functionality, Four-compartment dosing unit, skid-mounted, mobile, used – row-type feeder. Each hopper approx. 20 t, loader feeding width approx. 3.65 m, continuous operation output approx. 400 t/h. Complete with hopper extensions, main discharge belt, separate 18 m inclined conveyor, motor-driven swiveling undercarriage, material moistening, material shortage sensors. For production of mineral mixes, base layers, etc. Option: Additional cost for new control system. Nsdjx Rvc Aepfx Adrsld

Condition: ready for operation (used), functionality: fully functional, power: 12 kW (16.32 HP), Year of construction: 2020, operating hours: 23,531 h, machine/vehicle number: GGI0018899, Equipment: trailer coupling, For sale is a dust suppression system (dust control machine) from the brand Generac. This unit is ideally suited for construction sites in demolition or in the recycling sector when shredding dusty materials such as wood, stone, or others. The system is mounted on a practical trailer chassis, making it highly mobile. Technical specifications: - 15kW blower motor - Maximum range: 50m - Integrated control panel - Phase inverter - Booster pump with peripheral impeller - Flow meter to protect the pump - Pressure gauge for outlet pressure display - Stainless steel crown fitted with nozzles - Water drain system - 2 height-adjustable stabilizers Nlodpfx Ajxankzsdrsd If you have any questions, feel free to contact us. We are currently selling another dust suppression system as well. If you are interested in purchasing both, a package price is possible. The unit comes from our own stock. We are not machinery dealers.

Condition: like new (used), Year of construction: 2022, functionality: fully functional, machine/vehicle number: SN 1171, workpiece weight (max.): 450 kg, working height: 870 mm, feed rate Y-axis: 45 m/min, working width: 300 mm, warranty duration: 12 months, total length: 1,900 mm, height adjustment type: mechanical, overall weight: 450 kg, total height: 1,500 mm, total width: 1,300 mm, compressed air connection: 6 bar, Equipment: documentation/manual, The APACHE 3 is a cost-effective solution suitable for both craft and industrial applications, specifically designed for coating facade claddings and their supporting substructures. It is perfectly suited—without limitation—for coating profiles with cross-sections of 300 mm x 25 mm, providing flawless surfaces in a highly efficient and cost-saving manner, requiring no special prior knowledge from the operator. This unit can also be integrated into automated systems or coating lines. It can coat boards, profiled boards, tongue-and-groove boards, rhomboid profiles, laminated timber, and structural timber, as well as decking, garden, log cabin, sauna or privacy screens. Essentially, it's ideal for any product requiring a premium-quality visible surface. Substructures (typically black) can also be coated with low-viscosity, highly pigmented stains containing wood preservatives—even without lateral brushes. The APACHE 3 distinguishes itself from standard market products by its robust monoblock steel welded frame and a coating applied using a baking process with extremely resistant Teflon (enamel). This non-stick coating ensures self-cleaning, making the machine extremely low-maintenance. The machine offered is brand new and available for demonstration in our showroom. We would be pleased to demonstrate our machines and systems either on-site or at customer locations in your vicinity. For further information and a detailed description, please visit our SARMAX website. APACHE 3 Serial number: SN 1171 Flood coating unit with three (3) brushes Nodpexhquxofx Adrjld Working width: 300 mm Working height: 100 mm Minimum workpiece length: 100 cm Feed speed, frequency-controlled: 10–45 m/min Number of driven transport rollers: 3 Diameter of transport rollers: 80 mm Brush arrangement: two (2) from above, one (1) from below Diameter of brushes: 160 mm Central brush drive: 2.2 kW Compressed air blow-off left/right, fan nozzles to clear tongue-and-groove: 80 l/min Double diaphragm pump: 90 l/min Compressed air consumption: 600 l/min Connection: CEE plug 16 A 400/50/3 V/Hz/P E Total power: 4.5 kW Working height: 900 +/- 50 mm Approximate weight: 450 kg Operation: via control and indicator devices according to VDE, hydraulic ball valves Dimensions (L/W/H): 1,900 x 1,300 x 1,500 mm Standard: CE Color, design: grey 7046 RAL

Condition: good (used), Welding current range – 200 A Weight: 158 kg Nledpfxjfkpgde Adrod Accessories / Special features: - Separate ESAB A 10 wire feeder with 2-roller wire feed - Includes hose set and ground cable Siegfried Volz Werkzeugmaschinen Rüschebrinkstr. 151-153 D - 44143 Dortmund - Wambel / Germany

Condition: used, Shielding Gas Welding Machine MIG-O-MAT Type U 405 Serial No. Year of manufacture 1991 Output 400 amps = 60% duty cycle 280 amps = 100% duty cycle Adjustment range 18 steps Torch hose length 5 meters Power supply 380 V, 50 Hz, 32 amp plug - Spot and interval welding function - 2-stroke and 4-stroke welding functions - Wire feed with 2-roller drive - Water-cooled - Shielding gas pressure regulator Nlodpeyy Dfqsfx Adrod - Supplied with 1.2 mm welding wire Dimensions L x W x H: 1300 x 500 x 900 mm Weight approx. 200 kg In good condition

Condition: ready for operation (used), GASTEC Detector Tubes indicate concentrations directly by way of a calibrated scale printed on the tubes. At GASTEC, we endeavour to achieve highest quality detector tubes for analysing airborne gases/vapours, as well as pollutants in soil and water through our advanced state-of-the-art research and development. Through our efforts we have acquired a solid reputation among our customers in virtually all sectors of industry, commerce and society. Tubes are now available for more than 500 different applications. Nljdpfx Adey D D Tcjred

Condition: used, MIG / MAG Pulse Inverter Shielded Gas Welding Machine FRONIUS Type TransPulsSynergic - TPS 330 Item No.: 4.075 Serial No. Year of manufacture: approx. 2000 Output: 330 amps = 50% duty cycle 300 amps = 60% duty cycle 210 amps = 100% duty cycle Nsdpfx Aoyxy Tbodrold Infinitely adjustable output range Open-circuit voltage: approx. 50 volts / approx. 30 volts Power supply: 400 V, 50 Hz, 32 A plug - Digital display for voltage and current - Pulse welding function - Various welding programs selectable Welding processes: MIG/MAG/TIG (program and manual operation) 2-stroke, 4-stroke, 4-stroke special and spot welding - Separate 4-roller wire feed unit FRONIUS Type VR 152 with approx. 1.5 m connection hose package - 4 meter hose package NEW, with FRONIUS central connection - external Fronius water cooling unit Type FK 71 - Welding gas pressure reducer NEW - Equipped with 1.2 mm welding wire Required space (L x W x H): 900 x 660 x 1550 mm Weight: approx. 160 kg Good condition – fully functional – ready for demonstration Also suitable for TIG and electrode welding. Accessories for TIG and stick electrode welding are not included in the scope of delivery.

Condition: used, MIG MAG welding machine, gas-shielded welding unit, CLOOS type GLC 357 N MIG MAG welding power source Manufacturer's number: 576, Year of manufacture: approx. 1985 Rated power: 350 Amps Njdpehubg Tefx Adrjld Power: 350 Amps - 80% duty cycle 310 Amps - 100% duty cycle Adjustment range: stepless Connecting hose package: 4.5 meters Mains connection: 380 Volts, 50 Hz, 32 Amp plug - 2-cycle and 4-cycle welding system - external wire feeder, type CK 72 ZK, with 2-roller drive and 4.5-meter hose package - 3-meter hose package with central connection and CLOOS hand torch - water-cooled - pressure gauge for gas cylinder - welding machine equipped with 1 mm welding wire Space requirement L x W x H: 1250 x 600 x 1100 mm Weight: 260 kg Device tested - function is working properly.

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 980x860x1380 mm Weight 165 kg Nljdpfx Asv Ucf Todrjd Total power requirement 0,75 kw

Condition: used, Year of construction: 2009, machine/vehicle number: 725, ECKERT plasma-gas cutting machine - JANTAR 2 Nedpfxeqntkij Adrjld Parameters: Working width 2500 mm Working length 6000 mm Positioning accuracy +/- 0,005mm Thickness of plasma cutting - 35 mm Thickness of torch cutting - 120 mm Max thickness of sheet metal/cutting max 120 mm