Used Czemar Lewanter 22/10 for sale (35,504)

Condition: ready for operation (used), Heidenhain ROD 270 18000 02S12-03 rotary encoder. 331 882-22 SN:X942010635, used, minor signs of wear, 100% fully functional, scope of delivery as per photos. Hjdpsx Er Spsfx Ab Nenl

Condition: ready for operation (used), Seidel 65WKS-M310/22-V3 - 65WKS-M310 / 22-V3 servo amplifier 5.9 kVA, serial number as per photo, used, normal signs of use, 100% functional, scope of delivery as per photos Hnsdpfx Aei Ec Rleb Nol

Condition: ready for operation (used), Year of construction: 2011, A Gernep cold glue and self-adhesive labeling machine for spirits is available. Nominal capacity: 12000bottles/h, direction of operation: RM, control range: 3000-18000bottles/h, bottle format volume: 700ml/750ml/1000ml, bottle material: glass. Including two cold glue units, two self-adhesive dispensers, cold glue unit height adjustment, diameter adjustment slide, breakage detection, bottle counter, side cam alignment, dating unit and Etima neck ring preparation. Documentation available. An on-site inspection is possible. Hedpfx Abjy N Dfcj Nenl

Condition: new, Year of construction: 2018, Special features of the gantry design: Gantry design with a low center of gravity, wide bearing separation and optimum stiffness to mass ratio. The granite guideways ensure a uniform thermal, dimensional, torsional and geometric stability of the machine. 24 air bearings for smooth movement of the three axes. High dynamics for better performance, the machine can achieve high accelerations like comparable medium and large CMMs. Thermally compatible materials and components minimize the influence of ambient temperature fluctuations on measurement results, Air filter and regulator. Z-axis pneumatic counterweight system. Granit table with thread inserts of size M10. Passive vibration isolation pads Software: Hnsdpfod Ambtex Ab Nol metrolog AN Scan Standard Geosurf Advanced SP Step converter I ++ interface Technical specifications Measurement paths: X: 1200mm Y: 2000mm Z: 1000mm Max workpiece weight: 1200kg Weight of the measuring system: 5700kg Overall dimensions: 3020x2190x3750mm Accuracy according to DIN EN ISO 10360-2 or ISO 10360-4: Volumetric probing deviation: MPEP = 2.9μm Volumetric length measurement deviation: MPEE = 2.9+ L / 350 (μm) Environmental conditions: Room temperature standard: 18-22 ° C Operating temperature 10-35 ° C Air Supply: Minimum air pressure: 6bar Air consumption: 120NI / min

Condition: excellent (used), Year of construction: 2017, CREEMERS RCC22/10 IVR screw compressor machine after service capacity: 3000 L/min; 22KW engine; pressure 10 bar; mileage 7160h!!! 2017; Hnodpfx Aov Iv U Ieb Njl compressor fully functional. net price: 14500 PLN gross price: 17835 PLN

Condition: used, machine/vehicle number: 008021, Max. panel width: 4300 mm Max. panel length: 2200 mm Main saw blade projection: 125 mm No of Grippers: 11 Panel Rotation Station: yes Thin sheet loading: yes Hnodpfx Absy Nkygj Nol Vacuum sheet loading: yes

Condition: used, machine/vehicle number: 005552, Max. panel width: 2200 mm Hnedpfx Abjy Nktao Nol Max. panel length: 4300 mm Main saw blade projection: 125 mm No of Grippers: 10

Condition: used, axle configuration: 1 axle, first registration: 02/1999, suspension: air, tire size: 275/70R22,5, color: other, Year of construction: 1999, Equipment: ABS, tail-lift, = Additional Options and Accessories = - Tail lift = Remarks = Number of axles: 1, Unladen weight: 9,480 kg, Gross weight: 22,000 kg, Chassis type: Full chassis, Chassis material: Steel, Kingpin size: 2 inch, Suspension type: Air suspension, ABS, Body build year: 1999, Refrigeration unit manufacturer: Carrier, Refrigeration unit model: Maxima2, Refrigeration unit: Diesel/electric, Operating hours / electric: 1,678, Operating hours / diesel: 9,338, Type of cooling: Chilling, Axle type: ROR, Tail lift, Tail lift design: Rear platform, Tail lift capacity: 1,500 kg, Tail lift material: Steel, Battery for ramp = Further Information = General Information Cab: Day cab Licence plate: KLEYN1 Drivetrain Fuel type: Diesel Transmission Gearbox: Manual gearbox Axle Configuration Tyre size: 275/70R22.5 Brakes: Drum brakes Suspension: Air suspension Axle 1: Twin tyres; Tyre tread left inside: 14 mm; Tyre tread left outside: 14 mm; Tyre tread right inside: 14 mm; Tyre tread right outside: 14 mm Weights Unladen weight: 9,480 kg Payload: 12,520 kg Gross vehicle weight (GVW): 22,000 kg Functional Tail lift: Rear platform, 1,500 kg Refrigeration unit: Diesel and electric (9,338 operating hours diesel; 1,678 electric) Environment Emission class: Euro 0 Condition General condition: Fair Technical condition: Fair Optical condition: Fair Damages: None = Company Information = Kleyn Trucks is one of the world’s largest independent dealers of used vehicles. Here you can choose from a constantly changing stock of 1,200 used trucks, tractors, and trailers. Our range covers all European brands, years of manufacture, and price categories. Why buy from Kleyn Trucks? Easy! • Large and fast-changing stock • Recognizable quality • Good prices • Fair business practice • We speak many languages • We understand our customers • Support with import and transport • (Export) registration plates arranged quickly • Expert technical services Hnsdpfjxzy Tdjx Ab Nsl • The certainty of “recognizable quality” • And more…. Please visit our website for special offers and complete inventory: Leasing through Kleyn Trucks is possible in most European countries! Quickly calculate your leasing rate and submit an inquiry via our website. Ask directly about our European warranty package.

Condition: used, machine/vehicle number: 006645, Max. panel width: 5600 mm Max. panel length: 2850 mm Main saw blade projection: 125 mm No of Grippers: 11 Hjdpfx Aev Ir Sceb Njnl

Condition: ready for operation (used), Year of construction: 2001, operating hours: 10,631 h, travel distance X-axis: 1,020 mm, travel distance Y-axis: 610 mm, travel distance Z-axis: 610 mm, controller manufacturer: HEIDENHAIN, controller model: TNC 410, total height: 2,700 mm, table load: 500 kg, overall weight: 4,200 kg, spindle speed (max.): 6,000 rpm, spindle motor power: 13,000 W, tool weight: 7,000 g, number of axes: 3, This 3-axis Bridgeport VMC 1000 22 was manufactured in 2001. It features a working area X travel of 1020 mm, Y travel of 610 mm, and Z travel of 610 mm. The machine includes a robust table size of 1150 x 580 mm with a maximum table load of 500 kg. If you are looking to get high-quality machining capabilities, consider the Bridgeport VMC 1000 22 vertical machining centre we have for sale. Contact us for further details. • Table: 1150 x 580 mm; T-slots 5x; T-slot size 18 mm • Spindle torque up to 110 Nm • Tooling: holder SK 40 DIN 69871; tool changer 22 stations (optional 30); max tool Ø 75 mm; max tool length 250 mm; tool change time approx. 5.2 s • Axis speeds: rapid X/Y 40,000 mm/min; rapid Z 30,000 mm/min; feed 1–12,000 mm/min; acceleration 6 m/s² • Accuracy: positioning ±0.005 mm; repeatability ±0.002 mm • Coolant system: tank capacity 450 l; pump capacity 70 / 140 l/min • Electrical: 400 V, 3-phase, 50 Hz; full load current 30 A; fuse protection 63 A; connected load approx. 20 kVA • Pneumatics: compressed air 6 bar; consumption approx. 80 l/min • Machine size/weight: dimensions 2830 x 2360 mm; transport with Chip conveyor weight approx. 4700 kg • Spindle operating time: 10,631 h Hsdoy D N Aiopfx Ab Njnl Additional equipment • Chip conveyor (included) Technical Specification Taper Size SK 40

Condition: used, functionality: fully functional, power: 176.52 kW (240.00 HP), fuel type: diesel, Year of construction: 1996, FIRE ENGINE (CREW VEHICLE) MLF MAN 10.224: Year of manufacture: 1996 Crew: 9 Water tank: 1,200 litres Foam tank: 120 litres Pump: 1,600L/min at 8 Bar Turbo foam proportioner ZR 400 Extinguishing water tank with 1,200 litres and 120 litres of foam Rapid intervention hose reel Three equipment compartments on each side of the vehicle. All information provided to the best of our knowledge and belief, without guarantee of completeness or accuracy. This advertisement is for informational purposes only and does not constitute an offer. Subject to prior sale! Hedpfew U Dffox Ab Njnl

Condition: used, mileage: 59,000 km, power: 176.52 kW (240.00 HP), first registration: 02/1996, fuel: diesel, color: red, Year of construction: 1996, Equipment: parking heater, MAN HLF "CITY" - Year of manufacture: 1996 - Weight: 7.49 t (upon request) - Crew: 9 - Water tank: 1,200 liters Hnsdpfxstpnt Nj Ab Nol - Foam tank: 120 liters - Dimensions: 6.70 m × 2.32 m × 2.98 m - Engine power: 240 hp - Fuel: Diesel - Displacement: 6,871 cm³ The vehicle is equipped with a built-in fire pump. The rapid intervention hose is located in the rear right compartment. - SCBA holders in the cab - Front flashers - Rear warning system - Pump: FP 16/8 - Auxiliary heater - Foam proportioner in the equipment compartment - Inspection according to SP - New TÜV certificate - Servicing: new We are happy to discuss additional equipment options for your vehicle. Our specialists are available to carry out custom modifications to meet your requirements. Should you have any further questions, please do not hesitate to contact us. We can also provide you with further information and detailed photographs on request. We are pleased to offer you a pick-up service should you wish to arrive by Deutsche Bahn or by plane. Additionally, we can arrange accommodation at a hotel or guesthouse nearby if needed. All information provided to the best of our knowledge, without guarantee for completeness or accuracy. This advertisement does not constitute an offer, but is for informational purposes only. Subject to prior sale!

Condition: used, machine/vehicle number: 008208, Position 1: Front-Loading Panel Saws HOLZMA-HPP 510/43/43 + HEE 33/22 Position 2: Lift Table HOLZMA-HPP 510/43/43 + HEE 33/22 Hodsx A Thkepfx Ab Njnl

Condition: new, Year of construction: 2025, functionality: fully functional, machine/vehicle number: LGFB202509-3316, overall weight: 375 kg, color: grey, output current: 43 A, output voltage: 400 V, output frequency: 50 Hz, type of output current: three-phase, total length: 1,200 mm, total width: 950 mm, total height: 1,358 mm, type of cooling: air, Equipment: CE marking, For sale is a professional screw compressor INVERTER REM Power EPM 220/10 bar VSI 400V, suitable for industrial production and larger workshops where compressed or dry air supply is required. The model operates at a pressure of 10 bar, has a power output of 22 kW, an air flow rate of 3.06 m³/min, and runs on 400 V / 50 Hz. It is equipped with a built-in frequency inverter (INVERTER). Equipment includes soft start for the electric motor, motor rotation direction control, high-quality screw unit, electronic control system, and a soundproofed housing for reduced noise levels. Protection rating is IP55. Hjdpjy Avw Defx Ab Nenl Quick technical specifications: 10 bar | 3.06 m³/min | 22 kW | 400 V / 50 Hz | IP55 | INVERTER - frequency regulator.

Condition: used, functionality: unexamined, Ferwood Code: AGG0213 - Manufacturer Code: 2-056-10-0220 - Condition: Used - Functionality: Not tested - Compatible Machine: - Weight: 6KG - Dimensions: 36X26X21 - If interested, we offer an overhaul service; please contact us. Hnedjyztr Aspfx Ab Nsl

Condition: like new (used), 1 pc. Dassler high-pressure centrifugal fan is for sale Hnedeyx Tbropfx Ab Nol single inlet with sheet steel housing with the following performance parameters: condition: new, unused type: DCAS-852-2T-10 suction: DN 280 power: 7.5 kW air volume: approx. 4300 m3 / h speed: 2800 rpm air temperature conveyed: -20 to + 120 ° C motor: insulation class F / protection class IP55

Condition: used, TECHNICAL DETAILS - Belt width : 80 [mm] - Max. loading height : 50 [mm] - Max. temperature : 1150 [°C] - Adjustable belt speed : 5 - 100 [cm/min] - Max. belt load : 3 [kg/m] à 800 [°C] / 1.2 [kg/m] à 1100 [°C] - Heating length : 1000 [mm] - Cooling length : 1800 [mm] - Shielding gas : Nitrogen / Dihydrogen - Shielding gas flow : 2 [Nm3/h] - Purge gas : Azote Hjdpjw H Dvpefx Ab Nsnl - Purge flow rate : 1.8 [Nm3/h] POWER SUPPLY - Supply voltage : 400 [V] - Total installed power : 11.5 [kW]

Condition: used, TECHNICAL DETAILS - Belt width : 100 [mm] - Max. loading height : 50 [mm] - Max. temperature : 1150 [°C] - Adjustable belt speed : 5 - 100 [cm/min] Hnodpou E U Tbjfx Ab Nol - Max. belt load : 3 [kg/m] à 800 [°C] / 1.2 [kg/m] à 1100 [°C] - Heating length : 1000 [mm] - Cooling length : 1800 [mm] - Shielding gas : Nitrogen / Dihydrogen - Shielding gas flow : 2 [Nm3/h] - Purge gas : Azote - Purge flow rate : 1.8 [Nm3/h] POWER SUPPLY - Supply voltage : 400 [V] - Total installed power : 11.5 [kW]

Year of construction: 2010, condition: good (used), Cyklop Pallet strapping & film wrapping line: Cyklop XZE-311-22 pallet strapping Cyklop GL 1020M - pallet film wrapping Build in 2010 (XZE-M) 2006 (GL 1020M) Pallet strapper Cyklop XZE-311-22: Hnsdpfeg S Twuox Ab Nsl Speed: up to 100 Palles/h Pallet sizes: 800x1200 mm, 1000x1200, 1200x1200 mm Passage height: max 2700 mm (from floor) min height pallet conveyors: 300 mm max palletizing height: ~2500 mm - height conveyors (incl. pallet) max weight pallet: 1.500 kg Height over all: ~4200 mm Elektrical: 400 VAC, 3Ph/N/PE, 50 Hz, ~6 kW Dimensions (L x W x H): appr. 2.000 x 7.000 (incl. strapping reels) x 4.200 mm Weight: ca. 4.000 kg GL 1020M: Speed: up to 50 Pallets/h Pallet sizes: 800x1200 mm, 1000x1200, 1200x1200 mm Passage height: max 2200 mm (from bottom pallet) min height pallet conveyors: 300 mm Working height: 500 - 2000 mm (inkl. Palette) Film, outside (new) reel diameter: max 400 mm Film, reel width: max 500 mm Film thickness: 17/23/35 µm max pallet weight: 1.500 kg Elektrical: 400 VAC, 3Ph/N/PE, 50 Hz, ~3 kW Dimensions (L x W x H) : ca. 1.800 x 3.000 x 3.500 mm Weight: appr. 1.500 kg Equipment: Complete line, "L"-configuration (long leg ~20m, short leg ~5m) for pallet strapping & stretch wrapping, configured as follows: > Infeed position for pallets, motorized > pallet strapper Cyklop XZE with two strapping heads, three strap guides, integrated turntable for cross-strapping of pallets > buffer position for pallets, motorized > pallet film wrapper Cyklop GL 1020, film dispensing through fix lateral arm with pallet rotating on turntable > buffer position for pallets, motorized > turntable for pallets, 90° turn left or right, motorized > ejection of the turned pallet onto pick-up positions, motorized SEE LAYOUT FOR MORE INFO"

Year of construction: 2000, condition: good (used), Cyklop Pallet strapping & film wrapping line: Cyklop XZE-311-22 pallet strapping Cyklop GL 1020M - pallet film wrapping Build in 2000 (XZE-M) 2000 (GL 1020M) Pallet strapper Cyklop XZE-311-22: Speed: up to 100 Palles/h Pallet sizes: 800x1200 mm, 1000x1200, 1200x1200 mm Passage height: max 2700 mm (from floor) min height pallet conveyors: 300 mm max palletizing height: ~2500 mm - height conveyors (incl. pallet) max weight pallet: 1.500 kg Height over all: ~4200 mm Elektrical: 400 VAC, 3Ph/N/PE, 50 Hz, ~6 kW Dimensions (L x W x H): appr. 2.000 x 7.000 (incl. strapping reels) x 4.200 mm Weight: ca. 4.000 kg GL 1020M: Speed: up to 50 Pallets/h Pallet sizes: 800x1200 mm, 1000x1200, 1200x1200 mm Passage height: max 2200 mm (from bottom pallet) min height pallet conveyors: 300 mm Working height: 500 - 2000 mm (inkl. Palette) Film, outside (new) reel diameter: max 400 mm Film, reel width: max 500 mm Film thickness: 17/23/35 µm max pallet weight: 1.500 kg Elektrical: 400 VAC, 3Ph/N/PE, 50 Hz, ~3 kW Dimensions (L x W x H) : ca. 1.800 x 3.000 x 3.500 mm Weight: appr. 1.500 kg Equipment: Complete line, "L"-configuration (long leg ~20m, short leg ~5m) for pallet strapping & stretch wrapping, configured as follows: > Infeed position for pallets, motorized > pallet strapper Cyklop XZE with two strapping heads, three strap guides, integrated turntable for cross-strapping of pallets > buffer position for pallets, motorized Hnodpfjg A Hflsx Ab Nsl > pallet film wrapper Cyklop GL 1020, film dispensing through fix lateral arm with pallet rotating on turntable > buffer position for pallets, motorized > turntable for pallets, 90° turn left or right, motorized > ejection of the turned pallet onto pick-up positions, motorized SEE LAYOUT FOR MORE INFO"

Condition: new, Year of construction: 2025, functionality: fully functional, number of drawers: 10, warranty duration: 12 months, SLIDING RACK FOR GLASS D220-10 MANUFACTURED IN 2026/ BRAND NEW We manufacture sliding racks for glass pane storage (boxes with glass) or other panel materials (metal sheets, quartz sinters, polycarbonates, furniture boards). Hnjdpfshcipgox Ab Nsl We design and manufacture our racks from scratch in Poland. The materials which we use for manufacturing hold the proper certificates of durability and they are subject to quality control on a continuous basis. Our sliding racks have the form of slightly inclined drawers. They save up to 75% of space because all the partitions are parallel and they are separated every 10 millimetres. We also offer various sizes and load-bearing capacities. However, after consultations, we are able to manufacture a storage rack in various parameters, considering your individual conditions and requirements. The inclination of spans depends on assembly – it may be right hand sided or left hand sided. We recommend this storage rack especially to glass production facilities, stoneworks facilities, furniture production facilities and advertising companies, which want to use their space effectively. The assembly is very simple and easy owing to our long-term experience which allowed us to create a well-thought product which is attached with the assembly instructions, making the assembly trouble-free. In case of any problems, do not hesitate to contact our technical department. We also provide charged assembly services by our technicians in your location. D220-10 RACK TECHNICAL DATA Intended use – glass panes 321 cm x 255 cm in wooden boxes Possibility of storing single panes – YES Maximum box size – 345 cm x 275 cm Number of partitions – 10 The width of the storage strip for glass – 22 cm The length of the storage strip for glass – 395 cm The material on which glass is placed – steel supports coated with ash tree strips (5 pieces) Total height (A) – 335 cm Total width (B) – 368 cm Total depth (C) – 407 cm Space needed for the correct use of the rack – 29 m2 Requirements for the ground – smooth / levelled The number of the partition guide bearings – 8 pcs. Front wheel – Ø 160 full / reinforced polyamide Rear wheel – steel wheel with a bearing / rolled along the profile Colour - RAL 7040 (grey) Anti-corrosion protection – phosphating and powder-coating of steel elements Permissible load-bearing capacity of a single drawer – 2 500 kg Permissible load-bearing capacity of the whole rack – 25 000 kg Partitions inclination – left or right – depending on assembly Assembly time - 7 hours The number of people required for assembly – 4 people Drawers – joined (in order to reduce transport costs) Loading the box with glass onto the drawer – gantry, forklift, HDS DOCUMENTS ATTACHED TO D220-10 RACK - User’s Manual - Assembly Instructions - Rating plate - 12 months’ warranty This product is delivered in parts in order to minimise delivery costs. We also deliver our racks to the EU countries and other countries.

Condition: ready for operation (used), Year of construction: 2002, A flexible CNC filling system Rationator for liquid filling is available. Dosing principle: volumetric piston dosing, filling positions: 10, design: 2-phase filling, products: liquids/lotions/emulsions/cosmetic products/chemicals, filling range: 20ml-1000ml, total system length: approx. 7800mm, total system height: approx. 1650mm. Including conveyor belt and transfer station. Documentation available. An on-site inspection is possible. Expected to be available starting mid-June 2026. Hodpsyugmrefx Ab Nenl

Condition: not inspected (used), Year of construction: 2008, functionality: unexamined, controller model: POWERCONTROL, workpiece length (max.): 4,300 mm, workpiece width (max.): 2,200 mm, feed rate X-axis: 80 m/min, TECHNICAL DETAILS Maximum panel width: 2,200 mm Maximum panel length: 4,300 mm Maximum main saw blade projection: 125 mm Maximum feed speed: 80 m/min Saw Unit Maximum tool diameter: 450 mm Motor power: 13.5 kW Engraving Unit Maximum tool diameter: 180 mm Motor power: 2.2 kW MACHINE DETAILS Control system: POWERCONTROL Processing table Number of lift table levels: 4 Number of clamping devices: 10 Hjdpfx Ajyttqzsb Nsnl The machine is sold and delivered in its actual and legal condition ("as seen and approved") based on photographic documentation and descriptive technical/commercial documents. The buyer has the right to inspect the goods prior to collection and assumes responsibility for installation, securing, and operation of the machine at the destination. External Reference: 5552

Condition: used, functionality: fully functional, 400 kVA transformer station, year of manufacture 2019, station UK220-2.9X, transformer DOTUL400/10, year 2013, oil-cooled transformer, 10kV ±2x2.5%/400V, with HV plug-in bushings AK, with LV porcelain bushings, pointer thermometer. Hnedpfx Aboxzq Hbj Nol

Condition: not inspected (used), Year of construction: 2000, operating hours: 8,523 h, functionality: unexamined, travel distance X-axis: 1,000 mm, travel distance Y-axis: 500 mm, travel distance Z-axis: 500 mm, spindle speed (max.): 10,000 rpm, number of slots in tool magazine: 22, No reserve price – guaranteed sale to the highest bidder! Bidding obligates the buyer to collect the machine on time, either between 11.05.2026 and 13.05.2026 or between 18.05.2026 and 21.05.2026! TECHNICAL DETAILS Travel distance X: 1,000 mm Travel distance Y: 500 mm Travel distance Z: 500 mm Table dimensions: 1,150 x 490 mm Number of tool positions in the magazine: 22 Spindle taper: SK 40 (DIN 69871-A40) Max. spindle speed: 10,000 rpm MACHINE DETAILS Control: HEIDENHAIN TNC 426 Hjdpfoyn Nwtex Ab Njnl Dimensions & Weight Dimensions (L x W x H): 4,500 x 3,500 x 2,700 mm Weight: 4,200 kg Operating Hours Automatic operation: 8,523 h Control on-time: 71,860 h EQUIPMENT Technical documentation Spare parts (as shown in the pictures) Note: Only a 7.5t truck can turn around on the company premises. It is recommended to send a smaller truck for collection.