Used Dmt Kern Cd480 for sale (258)

Condition: ready for operation (used), Year of construction: 2000, Controls: HEIDENHAIN TNC 426, connected load: 7.7kW, including Rotator 3R WorkPal, with documentation, without spare parts. Nwodpfjx Tpytox Ai Ton

Year of construction: 1990, condition: ready for operation (used), Center height: 230mm, center width: 1500mm, swing diameter over bed/cross slide: 475mm/260mm, max. workpiece weight: approx. 500kg, spindle diameter: 1000mm, spindle bore: 62.5mm, max. chuck diameter: 250mm, travel X/Z: 1330mm/280mm, rapid traverse X/Z: 8m/4m/min, speed: 3150rpm. Machine dimensions X/Y/Z: approx. 3400mm/2000mm/1600mm, weight: approx. 3300kg, control: Bosch CC 200T. Documentation vorhanden. An inspection on site is possible. Nodpfx Aiexx Ufpj Tewn

Condition: used, This listing is for a Kern PCB 250-3 Balance. The unit is in full working condition and is ready for immediate release. The Kern PCB 250-3 is a Precision Laboratory Balance that is highly accurate, fully programmable and comes with a range of advanced features for precise record keeping and weighing. The balance is suitable for weighing and counting even the smallest parts. The balance is supplied with an 81mm weighing plate. A built-in recipe function makes determining the exact measurements of a mixture as easy as possible. This mode will allow you to weigh the specific parts of a mixture, record each value and recall your measurements afterwards for reference. Pre-tare function - manually subtracts known container weights Fully programmable - configure the balance to measure in special units such as length of thread g/m, paper weight g/m² or similar Percentage determination - store a given weight value (100%) and determine deviations from the target value CAL EXT function - adjust the balance's accuracy with an external adjustment weight RS232 interface - allows the balance to interface with a PC or printer GLP/ISO record keeping of weighing data with date, time and identification number Nsdpfx Asxx Atzsi Town Dedicated Recipe function logs the weight of a tare container plus the recipe's ingredients % Determination mode - calculates % deviations from a target value (100%) Vibration-free weighing - filters out vibrations to maintain stable weight results Supplied with a weighing range of 250g Manufacturer's part: Kern PCB 250-3

Year of construction: 1997, condition: used, Servo drive, servo card, output module, CPU card, input processor, power supply, control, converter, controller, servo line former, drive control device, power supply, AC main spindle drive, spindle controller -Indramat: AC main spindle drive from DMT CD320 cycle lathe Nsdpfx Aijn Tvb Ds Tjwn -Type: TDA1.3-100-3 API -Item: 244599 K41/96 -Dimension: 325/150/H390 mm -Weight: 10.8 kg

Year of construction: 2012, condition: good (used), cutting height (max.): 350 mm, neva orbit plus Nwjdpfxoz R Uvxe Ai Tsn 350 mm, with numerous frame saws and grinding machines.

Year of construction: 1997, condition: used, CNC control, control panel, machining center Nwodpfx Ajn Tvbnji Tjn -Manufacturer: DMT, control panel/CNC control with limit switch from CD320 cycle lathe -Limit switch: Balluf BNS 519 -Dimensions: 500/500/H210 mm -Weight: 11.4 kg

Condition: good (used), Kern lathe D 23 V with Forkard lathe chuck Multifix B digital display Nodevl Ig Dopfx Ai Tewn

Condition: used, This listing is for a Kern EMB 220-1 Balance. The unit is in full working condition and is ready for immediate release. The Kern EMB 220-1 is a precision balance tailored for laboratory and educational settings. Its compact design and user-friendly features make it an excellent choice for accurate measurements in various environments. Nwjdpexxzi Ujfx Ai Ton Key Features: Capacity and Resolution: Maximum Capacity: 220g Resolution: 0.1g This capacity and resolution make it ideal for weighing small samples, chemicals, and powders with precision. Compact Dimensions: Size: 170 x 240 x 38 mm Weight: 600g Its lightweight and compact form factor allow for easy handling and storage, perfect for classroom or lab benches with limited space. User-Friendly Display: The balance features a large LCD display with a digit height of 15 mm, ensuring readability from a distance. This is particularly useful in crowded work spaces. Simple Operation: Designed for ease of use, it operates with a two-button interface, making it accessible for users of all experience levels, including students in educational settings. Tare Function: The tare function facilitates easy adjustments when weighing items in containers, allowing users to exclude the weight of bowls, plates, or cups for accurate net weight readings. Power Supply: The balance runs on batteries (included), enhancing portability. The automatic shut-off function helps conserve battery life during periods of inactivity. Additional Features: It includes a ring-shaped draft shield (available on certain models) to minimize the impact of air currents on measurements, ensuring greater accuracy. A hook for underfloor weighing expands its functional versatility, allowing for weighing larger or bulkier items. Applications: The Kern EMB 220-1 Balance is versatile and suitable for various applications, including: Laboratories: Ideal for weighing chemicals and samples in research and testing environments. Educational Use: Perfect for classrooms where students learn about measurements and experiments. Field Experiments: Lightweight and battery-operated, making it a practical choice for outdoor scientific work. Technical Specifications: Weighing Capacity: 220g Resolution: 0.1g Dimensions: 170 x 240 x 38 mm Weight: 600g Display: Large LCD display with 15 mm digit height Operation: Simple two-button operation Tare Function: Yes Power Supply: Batteries (included) with automatic shut-off function

Condition: used, Hilger & Kern P80 Pump Basic version P80 Container size 80 l Transmission ratio (drive) 56:1 Delivery rate (at 20 double strokes) l/min 0.61 Material viscosity (ball valve pump/scoop piston pump) 2.5 million Working pressure (max.) bar 20-250 (315) Air consumption at 20 double strokes l/min 220 Dimensions base plate (A x B) mm 610 x 500 Nwedpfxsg Ib Npe Ai Tjn Height retracted mm 1400 Height extended mm 2200 Weight without container kg 65 / 72 Maximum container height mm 750 Maximum container size 80 Maximum container outer diameter mm 440 A single pump is included in the scope of delivery. Complete factory closure, large selection of racking systems, pallet racking, shelving, paternoster lifts. High-quality industrial machines, lathes, grinding machines, hand tools. More items – new and used – can be found in our shop! International shipping costs available upon request!

Condition: ready for operation (used), Year of construction: 1970, LZ lathe, manufacturer: KERN, type: DS 20 AL, year of manufacture: approx. 1970 with 3-jaw chuck, Forkardt 250mm, tool quick-change holder Multifix size C with holders, coolant system. Turning diameter over cross slide: 500mm Njdpfx Ajgqxciei Tswn Turning diameter over carriage: 250mm Distance between centers: 1000mm Spindle speeds: 12 - 1200 rpm Machine can be demonstrated in working condition. Good condition of guides.

Condition: good (used), Year of construction: 1996, Permanent Magnet Motor, Permanent Magnet Motor, Electric Motor, n-Mot, Perm Magnet Motors, Servo Motor, Permanent Magnet Main Drive Motor, DC Motor, Asynchronous Main Drive Motor, Spindle Motor -Manufacturer: Indramat, servo motor from cycle lathe DMT CD320 -Type: MACO71C-0-US-2-C/095-A-/S001 -Part No.: 228353 -Speed: 2000 rpm -Shaft: Ø 19 x 37 mm -Dimensions: 390/115/H170 mm -Weight: 11.9 kg Nedpfjpb Eawex Ai Tewn

Condition: like new (used), amount 1 Set For sale is a package of KERN cutting inserts. Some are new and some are slightly used. Year of manufacture unknown. 50 pcs. -> F3 3947 0029904 HP25A Nsdpjyr Si Tefx Ai Tewn 30 pcs. -> F3 3943 pcs. -> F3 3943 pcs. -> KERN KG – Diverse

Condition: like new (used), Year of construction: 2020, operating hours: 635 h, functionality: fully functional, Turn and loosen digestate, silage maize and compost in a drying container so moisture escapes evenly and the volume drops sharply, even with heavy, poorly flowing material. This MULTIMIX HD screw mixer from Martin Energietechnik is the heavy-duty version, built for separated digestate that the standard model cannot handle. Built 10/2020, approx. 635 operating hours, as-new condition. Checked, serviced and ready for use by us. All 5 screws are in good condition. Only one unit available. This is a single used machine, not ongoing stock. Once sold, it is gone. Pickup and transport (750 kg gross) have to be scheduled. Best for: biogas plants and farms that dry digestate, silage maize or compost in containers. Not suitable for: drying containers with dimensions other than those listed below. Fits drying containers with: • Length 6500 mm • Inner width 2314 mm • Inner height 2090 mm • Round-tube track D = 89 mm What the equipment means in practice: 4.4 kW drive motor with heavy-duty chains: strong drive for heavy material, and the automatic chain tensioner keeps the chain tight by itself 5 conical special screws for silage maize and digestate: matched to a container height of 2090 mm Travel drive with 4 driven wheels: the unit moves along the track on its own PLC control with manual and automatic mode: set the pause time of the reversing cycle steplessly, then let it run Trailing cable approx. 10 m with CEE 16 A plug, 5-pole: connects to standard three-phase power Complete package: base unit with 4.4 kW motor, chain drive with automatic tensioner, 4-hole flange for the screws, 5 conical special screws, travel drive, control cabinet with PLC (safety functions, manual/automatic mode) and connection cable to the unit. The machine in detail: compared with the standard model, the HD version has, according to the manufacturer, a wider base frame, special screws, higher drive power and a reinforced drive train. Technical data: Martin Energietechnik, MULTIMIX HD, built 10/2020, approx. 635 h, 4.4 kW, CEE 16 A 5-pole, gross/net weight 750 kg / 695 kg, customs tariff no. 8479.8220, country of origin Germany. Condition: as new, usual cosmetic signs of use. Location: 6064 Kerns (self pick-up, transport by arrangement). Price: CHF 15,000. Nodpfez Rv Tdox Ai Tswn Why you can buy with confidence: built 10/2020, approx. 635 operating hours, checked and serviced by us, all 5 screws in good condition, in-person inspection in Kerns by appointment. Inspect and test before you buy: you may verify identity, condition, completeness and operation at inspection or pickup. We guarantee what we control: the machine is what this listing says it is, complete and functional when you see it. We do not promise performance in an application we cannot assess, which is why we ask about yours first. Why buy now: this is a single used machine, not ongoing stock. Once sold, this exact configuration is gone. First-buyer bonus: buy by October 27, 2026 and receive CHF 1,000 off, so CHF 14,000 instead of CHF 15,000. Valid until October 27, 2026, or until the machine is sold. Action: send us your intended application, required capacity and destination. We will confirm suitability and provide a transport estimate.

Condition: used, operating hours: 500 h, functionality: fully functional, type of input current: three-phase, input voltage: 400 V, Turn fine-grained biomass into uniform pellets with a complete pelletizing system: pellet press, material bunker, drum sieve with conveyor belt and big-bag handling, all from one manufacturer. This EcoKraft RP22 system is built around the second-generation RP22 press, developed for fine-grained biomass. It has built-in steam extraction from the pressing chamber and two central lubrication points, which keeps it compact and easy to operate. Only one system available. This is a single used system, not ongoing stock. Once sold, it is gone. Pickup and transport slots are limited (press alone: 650 kg). Best for: pelletizing fine-grained biomass (for example fertiliser, wood or plant-fibre mixes) indoors, protected from the weather, with 400 V three-phase power. Not suitable for: outdoor use, unattended operation, or explosion-risk areas (no explosion protection is included as standard). What the equipment means in practice: RP22 GEN2 press, max. 22 kW: powerful press for fine material, with steam extraction from the pressing chamber Bunker 1 m³ with screw discharge and level sensor: the sensor sends a start/stop signal that controls filling of the press Vibration pads on compressed air: help prevent material bridging in the bunker Drum sieve with conveyor belt: screens out fines and collects them in a big bag Complete package (as supplied by EcoKraft AG): • Pellet press RP22 with automatic central lubrication • Pneumatic grease system for 18 kg buckets with 18 kg food-grade grease bucket • Digital water dosing pump 54 l/h • Die 6x20 mm, 45° pre-compression • Material bunker 1 m³ with screw discharge, level sensor and vibration pads • Drum sieve with conveyor belt 6mm sive + 4 mm sive • Big-bag racks: 1x Vario 1.0 and 3x Vario 1.5 (stackable) • Big bags: 1x 90x90x110 cm and 5x 95x95x150 cm Nedoz Rwimopfx Ai Tjwn Technical data: Press: 1.70 x 0.80 x 1.70 m, 650 kg, max. 22 kW, 63 A CEE plug (50 A upstream fuse required), customs tariff no. 84793010 Drum sieve: Ø300 x 1200 mm, height adjustable, side feed left or right, max. discharge height 1800 mm Conveyor: length 3600 mm, discharge height 2600 mm, belt width 150 mm, 49 cleats, 0.75 kW Manufacturer: EcoKraft AG, Germany, with manufacturer CE declaration Condition: used. Bought second hand in like-new condition, then used by us for approx. 500 operating hours. The bunker is a demo unit with light signs of use. Location: 6064 Kerns (self pick-up, transport by arrangement). Price: EUR 70,000. Why you can buy with confidence: approx. 500 operating hours in our own use, complete scope as listed, manufacturer documentation available, in-person inspection in Kerns by appointment. Inspect and test before you buy: you may verify identity, condition, completeness and operation at inspection or pickup. We guarantee what we control: the system is what this listing says it is, complete and functional when you see it. We do not promise throughput or pellet quality for your material, which is why we ask about your application first. Speed bonus: buy by October 27, 2026 and receive EUR 2,000 off, so EUR 68,000 instead of EUR 70,000. Valid until October 27, 2026, or until the system is sold. Action: send us your material, required capacity and destination. We will confirm suitability and provide a transport estimate.

Condition: repair required (used), For sale at a favorable price: Please send us your price offers. Mattress production line for overhaul or dismantling. Manufacturer: KSM, approximately 25-30 years old. The system is aging and requires a thorough overhaul; otherwise, it is functional. It has only been used infrequently by us. However, it is also interesting as a source of spare parts for dismantling. Control system with Lenze frequency inverters, Siemens PLC, conveyor belts, many motors, sensors, metal, aluminum profiles, needle grippers, etc. Consisting of: Gantry: Plate feeder with needle gripper (for automatically placing individual foam plates onto an alignment station with a conveyor belt). Nwsdpfxj Aba Ncj Ai Ton Roller adhesive application system (here, the foam plates are passed through on the conveyor belt and adhesive is applied by rollers). Padding carrier feeder with needle gripper (for automatically placing padding carriers (felt) onto the foam plates that have been wetted with adhesive). Adhesive tunnel with adjustable nozzles (here, the pre-assembled plates are sprayed with adhesive on the conveyor belt to allow the frame to be glued). After that, the material can be removed from the conveyor belt to assemble the mattresses. Several hundred mattresses per shift are possible. The system will only be sold as a whole. Dismantling and transport must be handled by the buyer. (EXW)

Condition: good (used), Year of construction: 2016, operating hours: 14,600 h, functionality: fully functional, machine/vehicle number: 1087-1210063, Printing solution: Xeikon QA-P toner Nwodpfx Aox Ap Rhsi Ten Working resolution: Digital frontend Xeikon X-800 with toner optimization module Finishing solution: Unwinder, WFM, high-capacity stacker, Kern end processing solution Year of manufacture: 2016 If interested, we are happy to provide further information or video material. Disassembly was carried out by the Xeikon representative.

Condition: excellent (used), Year of construction: 2026, machine/vehicle number: 62401, functionality: fully functional, total length: 7,050 mm, total width: 2,550 mm, total height: 2,500 mm, overall weight: 3,400 kg, Dry wood chips, firewood and other coarse, wet biomass in a container that goes straight onto your truck, with warm air blown through the perforated floor. This Lauber TroCo drying container was built in 03/2026 and has been used only three times by us. It is in very good condition and ready to dry. Only one unit available. This is a single used machine, not ongoing stock. Once sold, it is gone. Best for: drying coarse, wet biomass such as wood chips, firewood and other coarse plant material, then moving the container to where you need it with a hooklift truck. Not suitable for: finely ground bulk material unless you verify it with us first. A warm air source and the air hose are not included, you need to supply them. Nwsdpfxsz I Dzij Ai Ton What the specifications mean in practice: - 34 m3 volume - one large batch per drying cycle instead of many small ones - Hooklift system (locking dimension 3,890 mm) - load, move and unload with a standard hooklift truck, no crane needed on site - Perforated ventilation floor with round air connection at the door end - warm air is pushed up through the whole load, so it dries evenly - Fitted tarp cover - keeps rain out during storage and transport - Rear rollers and ladder steps on the front - easier to roll off and to inspect the load - Gross weight rating 21,000 kg - heavy loads are no problem for the frame Technical data (from the nameplate): - Manufacturer: Lauber Trocknungstechnik, type TroCo, serial no. 62401 - Year built: 03/2026 - Volume: 34 m3 - Length: 7,050 mm, height: 2,500 mm - Empty weight: 3,400 kg, permissible gross weight: 21,000 kg - Locking dimension: 3,890 mm - Colour: yellow - Safety inspection label (DGUV Rule 114-010) from the container builder is fitted, see nameplate photo Condition: Built 03/2026, used only three times by us, very good condition. Fully functional. Location: Stanserstrasse 50, 6064 Kerns (self pick-up, transport by arrangement). A hooklift truck, a suitable forklift or a crane is needed for loading. The container weighs approx. 3,400 kg empty. Why you can buy with confidence: - Built 03/2026, used only three times - Used by us, not rented out - Nameplate photos available, in-person inspection in Kerns OW by appointment Inspect before you buy: you may verify identity, condition and completeness at inspection or pickup. We guarantee what we control: the machine is what this listing says it is. We do not promise performance in an application we cannot assess, which is why we ask about yours first. Why buy now: This is a single used unit. Once sold, it is gone. Inspection is available in Kerns OW by appointment. First-buyer bonus: buy within the next two weeks (until 20 October 2026) and we take CHF 500 off the price. Valid until 20 October 2026, or until the machine is sold. Action: Send us your intended material, batch size and destination. We will confirm suitability and give you a transport estimate.

Condition: good (used), functionality: fully functional, overall weight: 3,500 kg, Year of construction: 2007, operating hours: 9,700 h, MORIN quick-release hitch Nsdpfx Ae Ad N Tcei Tewn 3 buckets

Condition: new, Bernardo Bench Drill DMT 25 Technical Specifications - Drilling capacity max.: 25 mm - Tapping capacity max.: M20 - Morse taper: MT 3 - Spindle speed (5 steps): 340 – 2180 rpm - Throat depth: 240 mm - Max. distance spindle/table: 355 mm - Distance spindle/baseplate: 670 mm - Quill travel: 135 mm - Column diameter: 85 mm - Table size / T-slot size: 252 x 252 mm / 14 mm - Working area baseplate: 365 x 305 mm - Motor output (S1 100%): 1.1 kW / 400 V - Motor input (S6 40%): 1.5 kW / 400 V - Machine dimensions (W x D x H): 500 x 820 x 1260 mm - Weight: approx. 184 kg Features • Safety guard according to CE standard, adjustable for each drill length Nwedpfsyamz Hex Ai Ten • Machined worktable, height adjustable via rack-and-pinion with hand wheel • Ground baseplate with T-slots for securing large workpieces • Adjustable drilling depth stop for precise quill positioning • Guaranteed spindle run-out accuracy ≤ 0.02 mm measured in the quill • Powerful drive motor, suitable for continuous operation • Robust, high-performance drill presses for heavy-duty use • Includes automatic reversing for tapping operations Scope of Delivery • Key-type drill chuck 5 – 20 mm / B 22 • Drill chuck arbor MT 3 / B 22 • Reducing sleeve MT 3 / MT 2 • Tapping device • LED machine lamp • Height-adjustable safety guard

Year of construction: 2023, condition: new, machine/vehicle number: 001, The Stainless Steel Molasses Mixer is an advanced machine designed for homogeneous mixing of raw materials with liquids such as molasses and steam. With its two shafts and high-quality stainless steel construction, this machine offers durability and efficiency in one. Nwjdpfx Aerk Ipnoi Tjn The strength of this molasses mixer lies in its ability to deliver a continuous mixing process with an impressive capacity of 60 tons per hour. This makes it ideal for industrial applications where consistent and even mixing of materials is crucial to the production process. The machine's stainless steel construction ensures not only durability but also hygiene, making it suitable for applications in the food industry and other sectors where strict standards apply to materials in contact with products. Whether in the production of animal feed, chemical mixtures or other industrial processes, the stainless steel molasses mixer guarantees reliability and consistency in the mixing process, making it a valuable asset for modern production environments. Power:2 x 22 kW Speed:1500 rpm 2. volume: 600 liters 3. capacity:60 Tons/Hour 4. weight: 2500 kg

Condition: good (used), functionality: fully functional, overall weight: 2,500 kg, Year of construction: 2007, operating hours: 8,300 h, MORIN quick-release hitch Nwodpe Ad N Rzofx Ai Tjn Includes 3 buckets

Condition: used, Year of construction: 2011, functionality: fully functional, machine/vehicle number: 19823 i 19251, input frequency: 50 Hz, input current: 116 A, working width: 3,100 mm, total width: 6,617 mm, total length: 6,900 mm, total height: 2,550 mm, overall weight: 11,000 kg, input voltage: 380 V, workpiece length (max.): 1,000 mm, workpiece width (max.): 3,100 mm, workpiece height (max.): 60 mm, type of input current: three-phase, actuation type: electric, Equipment: CE marking, documentation/manual, TECHNO KERNEL FD I SD – a line of 2 through-feed drilling machines. Each machine has 6 upper and 6 lower drilling heads, with 2 independent motor units for each. On each unit, it is possible to install an assembly with 11 vertical spindles, arranged either along the X-axis or the Y-axis with a 32 mm spacing, or assemblies for dedicated machining operations. The first machine also has two horizontal drilling units, each consisting of 2 independent assemblies equipped with 11 spindles with a 32 mm spacing. Nwsdpfxezyrpns Ai Ten In the second machine, instead of the horizontal spindles, there are 4 glue and dowel insertion units installed on each side. It is possible to load the components manually, or to connect the machine to automated loading and unloading systems for operation in a production line.

Condition: ready for operation (used), Year of construction: 2016, travel distance X-axis: 220 mm, travel distance Y-axis: 500 mm, travel distance Z-axis: 150 mm, number of axes: 3, Gantry milling machine manufactured in 2016. This ISEL ATN Vergusssystem 3 features a robust assembly with X, Y, and Z-axis components, along with a PC control system equipped with a monitor, keyboard, and mouse. The machine offers travel ranges of approximately 220 mm in X, 500 mm in Y, and 150 mm in Z. If you are looking to get high-quality milling capabilities, consider the ISEL ATN Vergusssystem 3 machine we have for sale. Contact us for further details. Nodpfezw H Efjx Ai Tjwn - CNC Potting & Dosing System- Machine 1: 0 hours- Machine 2: approx. 20 hours- Machine 3: approx. 500 hours- 3 machines in total- Components per Machine: ISEL machine base frame with X, Y, Z-axis assembly, PC control system with monitor, keyboard and mouse- Loose Accessories: None (all components are assembled together)- External Dimensions: 4 m wide x 1.4 m deep x 2.6 m high (one machine is smaller due to the Y-axis configuration)- Axis data specified for each machine:- Travel Ranges: Approx. X- 220 mm, Y- 500 mm, Z- 150 mm- PC Processor / CPU: Intel(R) Core(TM) i3-2120 CPU @ 3.30GHz- PC Memory / RAM: 4096 MB DDR3 1333- BIOS: American Megatrends Inc. RX67QV BIOS Ver 1.05- Software Included: ISEL Remote program (for programming travel paths), ATN software (for programming movements with dosing times for casting/potting systems, e.g., Hilger & Kern), WinControl- Linear Drive Motor / Actuator Specs: Iselgermany EC-LES Spindelantrieb, 135W / 48V- Linear Module Type: Isel Linear-Einheit LES 4

Condition: good (used), Year of construction: 2023, functionality: fully functional, space requirement height: 4,200 mm, power: 3 kW (4.08 HP), Equipment: documentation/manual, Automatic Rotary Dryer C2M RED – 11 m³ – Year of manufacture: approx. 2022/2023 – Very good condition For sale are three automatic rotary dryers, model C2M RED, each with a volume of 11 m³, including conveyor systems for infeed and discharge as well as a central control system. The units have only been in seasonal use for a few cycles and are in excellent technical and visual condition. Technical data (per dryer): • Drying volume: 11 m³ • Throughput: approx. 11 m³ dried fruit per day • Diameter: 2.30 m • Height: 3.80 m to 4.20 m • Fan output: 2.2 kW • Motor (screw conveyor) + burner: 0.55 kW Njdew Hynuepfx Ai Tjwn • Burner output: 40 kW Energy consumption: approx. 20–35 kg gas per m³ dried product Special features: • Fully automatic three-stage drying process (preset, adjustable depending on product) • Automatic shut-off upon reaching target moisture level • Uniform drying thanks to continuous mixing via screw conveyor drive • Prevents moisture pockets or overdrying • Display of drying level, gas consumption, and operating time • Central control unit to operate up to 10 dryers simultaneously Included accessories: • Conveyor belts and elevators for filling and emptying (conveyor belt/unit: €4,000) • Central control system • Support frames, mounting parts • Documentation available Suitable for: Walnuts, hazelnuts, almonds, apricot kernels, chestnuts, and other suitable products for drying. Location: Austria Availability: Immediately Price: Drying chamber (of three available): €15,000 each; conveyor belt per unit: €4,000 If you have any questions, require further technical details, or would like to arrange a viewing, please feel free to contact us.

Condition: used, Servo drive, servo card, output module, CPU card, input processor, power supply, control, converter, controller, servo line former, drive control device -Indramat: AC Servo Line Former from DMT CD320 cycle lathe -Type: NAM 1.2-15 -Item: 246506 K39/96 -Dimension: 325/105/H390 mm -Weight: 21 kg Nwsdpfxen Tvcdo Ai Tsn