Used Dry Ice Blaster Model 1 for sale (85,056)

Condition: excellent (used), Year of construction: 1999, I sell the 1-lamp UV-drying tunnel Cefla UV TTE 2000 Year 1999 Hedpfsynvw Hex Al Sol Working width 1400mm. Total length 2,00m 1 Lamp GA 120 W Very good condition, available immediately.

Condition: used, Optical fiber, connection technology, EFO units, illuminator -Manufacturer: Fiberstars, EFO-1 1 Illuminator -Power: 68 W -Price: per piece -Number: 4 Stück Hodjfu I R Dspfx Al Sjl -Dimensions: 340/510/H165 mm -Weight: 4.7 kg/piece

Condition: new, Year of construction: 2024, machine/vehicle number: 05004TRW090130, Drying Oven TRW, Model II Hodpfx Alsh Tyrws Ssl For drying racks with max. 50rods, useable size 90x126cm, outer dimensions: approx. 2280mm wide x 1570mm deep x 2280mm high, useable space: approx. 1400x1070x1660mm, fixing and drying temperature: up to max. 180°C, connection: 400V, 50Hz, 21kW, weight: 900kg, lacquering: corps RAL 7035 (light grey), doors RAL 7037 (dust grey). ATTENTION: Not permitted for solvents! Chamber dryer, all-steel construction, with good thermal insulation. Simple insertion of drying racks by means of easy-to-open wing doors. The air is sucked out of the drying chamber by ventilators, is blown through thermostat-controlled heating registers and re-fed temperature-controlled to the drying chamber. The horizontal air guide in the drying chamber guarantees an even temperature control. The required temperature can easily be adjusted via actual and nominal value thermostat. Overheating protection by safety thermostat. Particularly suitable for fixing and drying of textile inks and flock glues up to 180°C. - Various drying racks for different applications available. - Special varnishing upon request. ATTENTION: Not permitted for solvents! Not permitted for foods!

Condition: new, Year of construction: 2024, For max. screen size: 120x145cm, connection: 400V, 50Hz, 6kW Hsdpfx Aleh Tymrj Sjl Sturdy drying cabinet in full steel construction, with 5 drawers smoothly moving on ball bearings. Good air circulation, with thermostat and timer, with white plastic-coated plate on top, can be used as deposit place.

Condition: new, Year of construction: 2024, Drying and Burn-in Furnace TRO, Model I For drying racks with max. 50rods, useable size 60x90cm, outer dimensions: approx. 2290mm wide x 1390mm deep x 2230mm high, useable space: approx. 1400x1070x1660cm. Suitable for vaporisation of low amounts of solvent, authorised for inks and solvents up to hazard class A II, according to safety requirements DIN EN 1539. Equipped with control of the minimum exhaust volume and a heating system in regard to the exceedance of the max. temperature. Fixing and drying temperature: up to max. 180°C. Power connection: 400V/50Hz, 21kW, weight: approx. 650kg, varnishing: corps RAL 7035 (light grey), doors RAL 7037 (dust grey). Special varnishing upon request. Chamber dryer, all-steel construction, with good thermal insulation. Simple insertion of drying racks by means of easy-to-open wing doors. The air is sucked out of the drying chamber by ventilators, is blown through thermostat-controlled heating registers and re-fed temperature-controlled to the drying chamber. The solvents released during the drying process are dissipated from the exhaust side of the ventilator while supply air gets into the drying chamber. The horizontal air guide in the drying chamber guarantees an even temperature control. The required temperature can easile adjusted via actual and nominal value thermostat. Overheating protection by safety thermostat. Particularly suitable for fixing and drying of textile inks, flock glues as well as for burning-in of plate and aluminium signs up to 180°C. - Various drying racks for different applications available. - We recommend the installation of a gas warning unit. Delivery time 10-12 weeks. ATTENTION: Not permitted for solvents! Not permitted for foods! Hsdpod I T Exjfx Al Sel

Condition: excellent (used), Year of construction: 2010, I sell the 1-head 1-lamp UV-drying tunnel Burkle TRUV 1300 Year 2010 Working width 1300mm. Hsdpfx Asvxa T Asl Sel Total length 2,00m Total power 18,7kW 1 Lamp GA 120 W Very good condition, available immediately.

Condition: good (used), Industrial oven, drying oven Type: PKL-1 Maximum temperature: 180 ° C The temperature is adjustable Hodpod Tiu Isfx Al Sel Number of tablets: 10 Size of Table: 70x50 cm Individually lockable electrical latch Oven dimensions: Height: 1450/1900 mm Width: 1250 mm Depth: 850 mm Weight: 350 kg We have 3 pieces on Stock!

Condition: like new (used), Staff Ice System BTX150 Ice Cube Machine / Ice Maker 150 kg/24h Year 2022 Technical Specifications Gelato BTX150 A Staff Ice System ice machine for the production and storage of ice cream. Designed for manufacturing and storing ice cream. Automatic extraction. Stirrer with durable polyethylene blades. The double lid allows ingredients to be added during the process. Vertical tank for complete control of the production process. 50 customizable operating programs. Technical features: Maximum ice cream production per cycle: 2 liters. Ice cream production: 15 l/h. Dimensions: 43.5 x 59.2 x 59.5 cm. Hsdpfx Ajyzc Rusl Sel

Year of construction: 2020, condition: used, functionality: fully functional, The dryer is primarily used for drying sewage sludge or substrate from biogas plants. The material fed into the dryer is swirled in the drying chamber by throw shafts. Exhaust gases from a combustion engine flow around the material, causing the water to evaporate. Daily throughput is approx. 10 t. The dryer is sold complete with all ancillary components such as screw conveyors, control cabinet, auxiliary burner, acid pump, exhaust air dampers, etc. For more details, please contact us directly. Dismantling and delivery possible. The manufacturer can assist with recommissioning. Hjdpfx Aloyx Iztj Ssl

Condition: good (used), Year of construction: 2022, functionality: fully functional, cooling capacity: 512.3 kW (696.53 HP), type of cooling: air, overall weight: 1,386 kg, total width: 2,400 mm, total length: 6,800 mm, total height: 1,570 mm, warranty duration: 6 months, Dry-cooler THERMOKEY GH2390.BZ 2/03 V Q1EEpF(EC)S 512.3 KW Cooling capacity: 512.3 kW (44/37 — +28C) Year of manufacture: 2022 Fluid: Glycol + Water Fluid flow: 67,4 m³/h Air flow: 152415 m³/h Number of fans: 6 pcs. Fan Diameter: 900 mm Volume: 248 dm³ External surface: 1329 m2 Dimensions: 6.8 x 2.4 x 1.57 m. Weight: 1386 kg. CONDITION, TESTING & READINESS The chiller / kaltwassersatz / undergoes seven stages of technical inspection and operational parameter verification. It is also tested at our own test station, with connection to water (or glycol) and adjustment of parameters according to your requirements. After testing, you will receive a detailed report with the operating performance and the overall condition of the chiller. The chiller / kaltwassersatz / is ready for transport and commissioning. Our engineers will assist you with cooling capacity calculations, selection of the appropriate cooling scheme, and configuration of the required equipment options. WARRANTY & SUPPORT The quality of the equipment is confirmed with a warranty ranging from 6 to 36 months. By purchasing a chiller / kaltwassersatz / from us, you also receive: - refrigerant charging; - replacement of oil and the refrigerant filter (for used chillers); - technical support. LOGISTICS - Worldwide delivery available Hodpfx Ajxyw Dqol Sjl - Support with loading, export documentation, and logistics coordination Get a detailed consultation. Photos, videos, and a full testing report can be provided immediately upon request.

Condition: as good as new (ex-display), Year of construction: 2022, 1.0 ft. Ultrasonic Cleaning Device Manufacturer: AIR FRESH SERVICE INDUSTRIEFILTER Type: 1-Chamber Cleaning System Inner Tank: 750 x 600 x 770 mm Year of Manufacture: 2022 THIS DEVICE HAS NEVER BEEN USED. Hedpfx Alev Nztxe Ssl

Condition: good (used), AFOS Defroster Model T1000 Defrost Twin Chamber Fully stainless steel Hjdpjx Ey Ufsfx Al Sjl Complete with refrigerator unit 400 v / 80 amps

Condition: reconditioned (used), Universal tool milling machine Manufacturer: Harich (DECKEL) Model: A (FP 1) Refurbished with CE certification Geometric acceptance with inspection protocol With warranty Hsdpjdvdc Iofx Al Sjl Accessories: - 3-axis digital readout FAGOR Innova 30i-M - Fixed table or universal table - Vertical milling head SK 40 - Coolant system - Operating manual CE and safety equipment: - New machine electrics with control cabinet - Electronically monitored protective cover on the vertical milling head - Chuck guard with electrical interlock - Drive motor with brake function - Control panel with emergency stop, release, start, and stop buttons - New documentation for machine and control cabinet - CE declaration of conformity

Condition: good (used), Erba Titan Model 3 die cutter Format: 830×1200 The machine is fully operational, ready for production. Titan is synonymous with power, it is the strongest machine in its class. Production Italy Format in frame 830×1200 mm Format of the press 855x1230mm Weight 6900kg Power supply 380V Number of cycles 900-1400/h Installed power 5.5 kW Equipment: – electromagnetic clutch and brake – control panel – 3 operating modes: single, continuous, with time delay on opening – central lubrication – additional safety guards and two pressure safety mats – service tools – hard sheet metal for the press Hjdpfxsw D E Rve Al Sel

Condition: good (used), functionality: fully functional, fuel type: diesel, color: green, overall weight: 4,740 kg, Year of construction: 2007, machine/vehicle number: 180992, Product Description Used vibratory hammer machinery Manufactured by ICE Model ICE416 L 2007 MODEL Hedpsum N T Rjfx Al Sel max. operating pressure 350 bar Overall Weight 4740 KG Maximum frequency 1600 rpm Single clamp 490 KG More information Please contact VIJAY JPN Industrial Trading Pte Ltd

Condition: good (used), workpiece diameter between centers: 2,286 mm, The No. 61 Angular Hypoid Tester is designed to test large bevel and hypoid gears up to 90" diameter and with shaft angles from 0 - 135 degrees. Spur, helical and internal gears can also be accommodated. The drive or pinion spindle can be rotated in either direction at a recommended spindle speed of 600 RPM. It is mounted in a head which is vertically adjustable on a column, so that the spindle can be offset either above or below the center line of the gear spindle for testing hypoid gears. The pinion head column is adjustable angularly in a horizontal plane to permit testing of gears of any shaft angle from 0 - 135 degrees. Hedpfxsrtrzde Al Sel Specifications: Centerline of Drive Spindle to Nose of Brake Spindle (90 degrees shaft angle and without face plate): 38-1/2" Max. / 7-5/8" Min. Centerline of Brake Spindle to Nose of Drive Spindle (90 degrees shaft angle and without face plate): 60" Max. / 10" Min. Centerline of Brake Spindle to Nose of Drive Spindle (90 degrees shaft angle and with 54" face plate): 60" Max. / 28" Min. Centerline of Brake Spindle to Centerline of Drive Spindle (For Spur Gears): 56" Max. / 6" Min. Distance Between Nose of Brake Spindle and Nose of Drive Spindle (for spur gears): 36-1/2" Max. / 0" Min. Offset of Drive Spindle Either Above or Below Centerline of Brake Spindle: 10" Range of Shaft Angles: 0 - 360 Degrees Maximum Diameter of Gear: 90" Diameter of Face Plate: 54" Outboard Bearing: 3" Diameter Hole Spindles: RPM of Drive Spindle Pulley Set No. 1: 100 - 400 RPM of Drive Spindle Pulley Set No. 2: 250 - 600 Diameter of Taper Hole (large end): 6" Taper Per Foot: 3/4" Depth of Taper: 8" Hole Through Spindle: 5-1/2" Net Weight of Machine: 20,000# Net Weight of Machine W/Outboard Support and Bed Plate: 24,000#

Condition: good (used), gear diameter: 508 mm, total height: 1,780 mm, total length: 2,990 mm, total width: 2,200 mm, MODEL 610 GLEASON GEAR ROUGHER/FINISHER Equipped with: Hydraulic Workholding Pendant Control Chip Conveyor Index Plate Geneva Cam Change Gears Hydraulic System Coolant System Manuals Specifications: Hedportrykjfx Al Sel Maximum Gear Pitch Diameter: 20" Cutter Diameters: 9", 10.5", 12",14",16", 18" Whole Depth: 1.250" Root Angle: 60 to 80 deg. Face Width: 3.0" Extreme Ratio (Minimum): 2.25 to 1 Number of Teeth: 20 to 75 Diameter of Taper Hole at Large End: 3-27/64" Cutter Speeds (Per Minute) for Roughing: 15.6' to 87.7' Feeds (Seconds Per Tooth) for Roughing: 3 to 35 Cutter speeds (Per Minute) for Finishing: 6.8' to 20.5' Feeds (Seconds Per Tooth) for Finishing: 3 to 9 Floor Space: 118" x 86.5" x 70" H Weight: 17,500 lbs.

Condition: used, mileage: 184,684 km, power: 375 kW (509.86 HP), first registration: 10/2021, fuel type: diesel, overall weight: 20,500 kg, axle configuration: 2 axles, next inspection (TÜV): 05/2027, brakes: retarder, color: red, gearing type: automatic, emission class: euro6, Year of construction: 2021, Equipment: ABS, air conditioning, all wheel drive, navigation system, parking heater, MAN 18.510 TGS 4x4H BLS Hydrodrive COC available! RADIO / Multimedia NEW * First registration: 06/2021 * Wheelbase: 3,600 mm * Fifth wheel height: 1,320 mm * Technically possible rear axle load: 13,000 kg * Technically possible front axle load: 8,000 kg * Tyres approx. 40% * Refrigerator box * 1 x bunk * Leather/velour seats * Blind spot camera assist * German vehicle Vehicle can be viewed at any time during our opening hours; test drives by appointment only! For export sales, a deposit will be withheld and refunded upon receipt of the certificate of arrival. Company logos or advertising logos on vehicles may have been digitally edited in the photos. Hedpfxey H Tfao Al Ssl No guarantee is given for the functionality of the extras. All information is provided without guarantee - subject to errors, changes, typos, and prior sale. Vehicle descriptions are expressly not guaranteed characteristics. We refer to our General Terms and Conditions and ask that you take note of them.

Condition: used, Year of construction: 1972, spindle bore: 65 mm, center height: 175 mm, This offer concerns the Heylingensteadt Model 315 EV with digital display. The machine comes from tool manufacturing and has had only a few operating hours, thus it is in good condition. Hjdeyhwyyopfx Al Ssl Due to company closure, I am selling various lathes, milling machines with extensive accessories, as well as a welding machine. If interested, please get in touch.

Condition: as good as new (ex-display), functionality: fully functional, overall weight: 355 kg, total length: 2,000 mm, total width: 1,300 mm, total height: 1,800 mm, The AVIKO 60100 G3 DRY ADVANCED detects flaws on steel balls with diameters ranging from 60 to 100 mm. Customers can control the system via the PC/PLC and its intuitive HMI, with access to software statistics, protocols, sorting history, video manuals, and direct connection to the machine monitoring software Precision Viewer. All primary movement elements are driven by compressed air or electric motors. The Advanced model is equipped with advanced eddy-current probes and incorporates the eddyvisor C instrument for precise crack detection. For operational efficiency, a loader and outlet holder are included as standard features. For more details please visit our website. Hjdpfxey H Dmbo Al Sel

Condition: used, mileage: 798,478 km, power: 368 kW (500.34 HP), first registration: 07/2018, fuel type: diesel, number of seats: 81, gearing type: automatic, emission class: euro6, color: other, brakes: retarder, Year of construction: 2018, Equipment: ABS, air conditioning, cruise control, navigation system, onboard kitchen, trailer coupling, = Additional Options and Accessories = - DVD - Front refrigerator - Retarder - Sleeper cab - Toilet - USB connections - Webasto heater = Further Information = Hodpfsyrnp Njx Al Ssl Height: 400 cm Damage: none = Company Information = We are an international company based in Belgium, located in the Brussels region (approx. 20 km). Belgian Bus Sales is your ideal partner for the purchase and sale of used buses, offering a spacious premises that serves as a display area. We always have a wide range of buses from all brands, with various capacities, models, and in every price range available from stock. We can help you find the right coach, school bus, or city bus tailored to your needs and your budget. All information is provided without guarantee. Errors, prior sale, and typographical mistakes reserved. Opening hours for used bus inspections: Mon–Fri: 08:30–12:00, 12:30–17:00. Mowimy po Polsku (Agata). We speak your language: Nederlands, Français, English, Español, Português, Italiano, Русский, Polski and more.

Condition: excellent (used), mileage: 122,600 km, power: 294 kW (399.73 HP), first registration: 08/2013, tire size: 385/55R22,5, axle configuration: 6x2, wheelbase: 4,900 mm, fuel tank capacity: 400 l, brakes: engine braking, color: white, driver cabin: day cab, gearing type: semi-automatic, emission class: euro5, suspension: air, permissible axle load (axle 1): 9,000 kg, permissible axle load (axle 2): 11,500 kg, permissible axle load (axle 3): 7,500 kg, loading space volume: 15 m³, Year of construction: 2013, Equipment: ABS, air conditioning, central locking, crane, cruise control, differential lock, fog lights, parking heater, seat heater, spoiler, = Additional Options and Accessories = Hedpfx Ajy D A Daol Ssl - Adaptive cruise control - Heated mirrors - Power brake booster - Roof spoiler - Air conditioning - Refrigerator - Air suspension - Air-suspended seats - Air horn - Beacon light - Disc brakes - Heated seats - Sun visor - Stability control - Auxiliary heater - Toolbox - Power take-off (PTO) = Further Information = General Information Applications: Cleaning, construction, demolition, ground drainage, land drainage, earthmoving, terrain management and arable farming Technical Information Engine displacement: 12,740 cc Transmission Transmission: Opticruise, semi-automatic transmission Axle Configuration Brakes: Disc brakes Suspension: Air suspension Front axle: Tire size: 385/55R22.5; Max. axle load: 9,000 kg; Steered; Axle brand: Nokian Hakkapelitta; Tread depth left: 90%; Tread depth right: 90% Rear axle 1: Tire size: 315/70R22.5; Twin tires; Differential lock; Max. axle load: 11,500 kg; Axle brand: Nokian Hakkapelitta; Tread depth left inner: 90%; Tread depth left outer: 90%; Tread depth right inner: 90%; Tread depth right outer: 90% Rear axle 2: Tire size: 385/55R22.5; Lift axle; Max. axle load: 7,500 kg; Steered; Axle brand: Continental; Tread depth left: 70%; Tread depth right: 70% Functional Crane: Year of manufacture 2013 Body manufacturer: J. Hvidtved Larsen FlexVac 311 Maintenance, History and Condition APK (Roadworthiness test): Inspected until 01/2027 Technical condition: Very good Visual condition: Good

Condition: used, mileage: 440,907 km, power: 375 kW (509.86 HP), first registration: 12/2020, fuel type: diesel, empty load weight: 8,074 kg, maximum load weight: 9,926 kg, overall weight: 18,000 kg, tire size: 315/60 22,5, tire condition: 40 %, axle configuration: 4x2, wheelbase: 3,600 mm, brakes: retarder, color: blue, driver cabin: sleeper cab, gearing type: automatic, emission class: euro6, number of beds: 1, Year of construction: 2020, operating hours: 440,907 h, front tire size: 315/60 22,5, rear tire size: 315/60 22,5, Equipment: ABS, air conditioning, central locking, cruise control, differential lock, fog lights, navigation system, onboard computer, sliding door, soot filter, spoiler, truck registration, Reference number for inquiries: 69097 MAN, 18.510 * Year of manufacture: 2020 * ABS, Anti-lock Braking System * EBS, Electronic Braking System * Power window regulators * Automatic climate control * Refrigerator box * Air suspension * Navigation system Hjdpsvtk Ugsfx Al Sjl * Diesel particulate filter * Retarder / ZF-Intarder * Power steering * Sleeping compartment * Stationary air conditioning * Cruise control * Central locking system * On-board computer * Differential lock * Low noise emissions * Long-haul transport vehicle > 7.5t * Digital tachograph * Radio CD * CB radio * Bluetooth * Sound system * USB interface * Adaptive cruise control (distance keeping assistant) * Lane departure warning assistant * OBU (on-board unit) preparation * Refrigerator * Electric windows and mirrors * Central locking via remote * Air horns * 2 x diesel tank * AdBlue tank * Roof spoiler * Fog lights * Comfort suspension seat * Multifunction steering wheel * Sun visor * Transmission type: Automatic * Suspension: Air/Air * Gross vehicle weight: 18,000 kg * Unladen weight: 8,074 kg * Payload: 9,926 kg * Permissible gross weight: 18,000 kg * Tire condition 1st axle: 30% / 30% - Tire size: 315/60 R22.5 * Tire condition 2nd axle: 40%/40% - Tire size: 315/60 R22.5 * Wheelbase: 3,600 mm * Tire sizes: 315/60 R22.5 * Special Individual Edition * Lamp bar * Swivel seat * Blind spot camera * Lamp bar * Coffee maker * Microwave * Power inverter * MAN telematics * Tire pressure monitoring system (TPM) * 2 x 480 liter diesel tanks * Rain sensor * Highlight: new model / special edition / lowliner Disclaimer: Subject to change, prior sale, and errors excepted. More images and videos available on our website. Our comprehensive service includes for example: * Purchase / sale / rental of commercial vehicles * Fast, straightforward financing * Processing of all (export) documents * Procurement of export/customs plates * Vehicle preparation: new tarpaulins, lettering, painting, etc. * Professional loading / load securing * TüV certification, registration service * Transfer of commercial vehicles Please contact our trained specialist staff, we will be happy to advise you.

Condition: used, empty load weight: 6,203 kg, maximum load weight: 14,797 kg, overall weight: 23,000 kg, axle configuration: 1 axle, first registration: 05/2024, next inspection (TÜV): 05/2026, suspension: air, Equipment: ABS, Krone SEK DryLiner single-axle box trailer | Side lashing points and lashing rail | Double-deck without beams – beams available on request | Portal door | Spare wheel holder | Support winch for forklift loading | Anchor rails on side walls | Valid inspection certificate until 05/2026 | Subject to errors, input mistakes and prior sale. Hodpjym Rd Ssfx Al Ssl

Condition: as good as new (ex-display), Year of construction: 2024, functionality: fully functional, Used vibratory finishing machine from PERS, model Vibra-Line B 150 l with buffer tank, combined with PERS dryer Vibra-Dry A 200 l — both are demonstration machines — mounted on a platform. Technical data / Vibra-Line B 150 l: - U-shaped process chamber with automatic discharge - Capacity (gross): 150 l - Usable volume (depending on workpiece geometry and material): 80 l Hedpjy A N U Asfx Al Sjl - Year of manufacture: 2024 - Outer diameter: 1,170 mm - Height: 860 mm - Chamber lining: 22 mm, yellow or brown PU - Total weight (empty): 320 kg - Drive power: 2.2 kW - Electrical connection: 3 x 400 V, 16 Amp. CEE plug - Machine color: RAL 7015/7035 - Control cabinet with touch panel and frequency inverter Buffer tank – 90 l: The compound (soap solution) independently flows through the filter basket into the buffer tank, from where a submersible pump feeds the solution back to the circular vibrator. - Buffer tank dimensions (LxWxH): 700 x 400 x 460 mm - Supplied with 1 submersible pump and 1 filter basket (630 µm) Technical data / Vibra-Dry A 200 l: - Corn/grain dryer with automatic discharge — vibratory dryer - Year of manufacture: 2024 - Volume: 220 l - Motor power: 1.5 kW - Heating: 3 kW per element (PTI temperature control) - Workpiece capacity: up to 65 kg - Corn capacity: 25–35 kg - Speed: 1,400 rpm - Heating output: 6 x 1.5 kW - Length: 1,141 mm - Width: 1,200 mm - Height: 905 mm - Internal bowl dimensions: 240 mm - Electrical connection: 3 x 400 V, 16 Amp. CEE plug - Machine color: RAL 7015/7035 - Corn granulate temperature: +30 to +50°C - Digital temperature control - Pneumatically controlled discharge valve - For commissioning, use 25 kg of corn type GM 16 or GM 20