Used Dust Exhaust Unit, Type Tde for sale (69,298)

Condition: new, All-directional roller conveyors, Type AC 149, total width 540 mm, straight 1 m, 100 mm pitch * For right-angled transverse transport to distribution, turning, or sorting points of roller and roller conveyor systems. * The conveyed goods must have a stable and smooth underside and should always rest on at least 3 roller axles. * All-directional roller conveyors are adapted to the design of roller and roller conveyor systems and can therefore be easily integrated. * Design: U-profile frame 20/70/20 mm, galvanized. All-directional rollers, Ø 48 mm, made of plastic, gray, with plain bearings, rollers arranged offset from axle to axle. Note: The conveyed goods must have a dimensionally stable, flat, closed, and clean bottom. * Passage can be folded up for roller and roller conveyor systems. The standard length of the passage is 1 m. The price is calculated based on the price of the corresponding conveyor element 1 m plus the additional cost for the passage (folding mechanism). * Further technical characteristics: Size: straight 1 m * Total width: 540 mm Total width: 540 mm Kodpfx Ako Abvpxeisnc Pitch (axle spacing): 100 mm Size: Straight 1 m Conveyor width: 500 mm

Condition: used, power: 2.2 kW (2.99 HP), input voltage: 400 V, input current: 16 A, input frequency: 50 Hz, type of input current: three-phase, volume flow: 1,850 m³/h, intake manifold diameter: 160 mm, filter area: 8.25 m², total height: 1,950 mm, total length: 1,700 mm, total width: 800 mm, overall weight: 200 kg, Equipment: CE marking, No. 3273 Extraction unit / dust extractor AL-KO Mobil-Jet 160 Used Dust extractor for extracting wood dust and chips Motor power 2.2 kW Nominal air flow rate 1850 m3/h Minimum air flow rate 1448 m3/h Extraction inlet Ø 160 mm Negative pressure 2120 Pa Filter area 8.25 m2 Air filter category G Pneumatic filter cleaning AL-KO OPTI JET Compressed air connection 8.5 bar Chip collection container approx. 320 l Base frame without wheels Suitable for wood dust separation, residual dust content class 2 (H2), max. residual dust content 0.2 mg/m3 Type 1 (B1), suitable for extracting combustible dust in Zone 11 BG-tested, GS-tested CE marking Suitable for indoor use Kjdpfez Ibgijx Akienc Electrical connection 400 V / 50 Hz, three-phase Ready to plug in, including power cable and 16 A plug Transport dimensions approx. 1700 x 800 x 1950 mm LWH Weight approx. 200 kg Sale on behalf of customer, ex location near 73430 Aalen, without dismantling, without transport and assembly Dismantling, loading, and transport by us optionally available Subject to errors in the description and price To avoid possible misunderstandings, an on-site inspection by appointment is possible and recommended Sold as is Technical specifications, condition description, year of construction and scope of delivery according to manufacturer’s brochure or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded, the following applies: “sold as seen” Photos and videos serve as examples and do not represent the actual scope of delivery Payment terms: Prices plus VAT, payment before collection or shipment Delivery terms: ex location

Condition: new, TECHNICAL DATA WELDING GENERATOR Model series WELDARC DIESEL Frequency (Hz) 50 Max. power LTP (kW) 7 Max. power LTP (kVA) 8.80 Normal welding mode 35% (A) 300 Intensive welding mode 60% (A) 250 Ignition voltage (V) 75 Minimum electrode diameter (mm) 1.6 Maximum electrode diameter (mm) 5 Fuel Diesel Tank (L) 35 Consumption 75% (L/h) 1.70 Autonomy 75% (h) 20.60 TECHNICAL DATA ENGINE Engine type KOHLER DIESEL Engine type KD425-2 Distribution Diesel O.H.V. Start Electric Oil protection Yes Displacement (cm3) 851 Oil capacity (l) 2.60 TECHNICAL DATA GENERATOR Technology Rings and brushes Ksdpfx As Abt Ryokijnc AVR regulation No Protection class IP 23 Insulation class H DESCRIPTION OF CONNECTIONS AND CONTROL PANEL 1 x 230V 16A connection – Overload protection + 1 x 16A 400V CEE 3P+N+T – Overload protection + Operating hour counter + Differential protection DIMENSIONS AND WEIGHT Length (cm) 89.50 Width (cm) 57 Height (cm) 77 Net weight (kgs) 175 PRODUCT ADVANTAGES Professional KOHLER engine, air-cooled Complete power generator with a 3-year warranty High tank capacity

Condition: used, functionality: fully functional, total width: 1,600 mm, total length: 1,600 mm, total height: 2,500 mm, Industrial Stone Separation System for Denim & Garment Finishing Lines The Tonello Mini Destoner is a professional industrial stone-removal unit manufactured by Tonello S.r.l., Italy. The machine is designed to efficiently separate pumice stones from garments after the stone-washing process, protecting downstream equipment while reducing manual handling and improving production efficiency. Integrated into professional garment finishing lines, the Mini Destoner allows garments to tumble inside a rotating stainless steel drum while pumice stones pass through the perforated separator and are collected in a dedicated container below. This unit was previously part of the MASI JEANS industrial denim finishing line and is suitable for integration with Tonello and other industrial garment washing systems. Technical Specifications • Manufacturer: Tonello S.r.l. • Model: Mini Destoner • Machine Type: Industrial Garment Stone Removal Unit • Application: Automatic separation of pumice stones after garment stone washing • Machine Compatibility: Tonello G1 330 HS and other Tonello industrial garment washing machines • Internal Reference: K344 • Country of Manufacture: Italy • Construction: Stainless steel rotating drum mounted on heavy-duty steel frame • Drum Protection: Perforated conical safety separator • Electrical Supply: Typically 400 V, 3-Phase, 50 Hz (to be verified during inspection) Key Features • Designed specifically for post stone-wash garment processing • Efficient separation of garments and pumice stones • Stainless steel rotating drum • Heavy-duty perforated separator cage • Integrated stone discharge chute • Mobile industrial steel frame with locking caster wheels • Operator control panel • Heavy-duty industrial construction • Suitable for continuous production environments Includes • Tonello Mini Destoner unit • Stainless steel rotating drum • Steel support frame • Perforated separator cage • Stone discharge chute • Operator control panel • Collection container • Industrial transport crate Applications • Denim stone washing • Garment finishing • Pumice stone removal • Industrial laundry operations • Textile wet processing • Denim manufacturing • Industrial garment production Condition • Previously used in professional denim production Knsdpfx Aozmwlhekiec • Good industrial condition • Structurally complete • Includes all major mechanical assemblies • Normal cosmetic wear consistent with factory use • Available for inspection before dismantling Location Valga, Estonia Dismantling & Transport Buyer is responsible for disconnecting, dismantling, loading, transportation, and all related costs. Professional handling is recommended due to the industrial construction of the equipment. Sales Terms Sold as-is, where-is, without warranty. Part of the MASI JEANS factory liquidation. The machine is available individually or together with the complete Tonello industrial washing and finishing line.

Condition: good (used), 130 linear meters of shelving system from Schäfer, type R3000 Used, like new, see pictures. Kedpfsd Nftxjx Akienc Height: 2.5 m Depth: 80 cm Load capacity per shelf: 250 kg Field width: approx. 128 cm Negotiable price: €26,800 net ex warehouse The offer includes: 101 pcs. uprights or frames, 2.5 m, galvanized 600 pcs. shelves, 250 kg load capacity per shelf, galvanized 34 pcs. cross braces for bracing. 6 levels per field (more levels are possible for an additional charge) Also available with a field width of 100 cm! Other configurations are possible. Heights of 2.5 m or 3.5 m are available. The goods are in stock. Transport and assembly are possible upon request. Inspection possible at any time by appointment. Further information on request. We have over 5000 linear meters of pallet racking systems from numerous manufacturers in stock. (Subject to changes and errors in technical data, information and prices, as well as prior sale! See our terms and conditions, all prices excl. VAT ex warehouse) Lenox Trading – Top storage technology & heavy-duty shelving used & new Description: Are you looking for high-quality storage shelves to buy? With around 100 of our own employees, Lenox Trading is one of the largest dealers for new and used storage technology in the entire DACH region (Austria, Germany, Switzerland). ⚡ IMMEDIATELY AVAILABLE: • Over 10,000 linear meters of shelving available for immediate delivery • 20,000 m² of storage platforms & steel construction platforms immediately available • Weekly 30–50 semi-trailer truckloads of goods turnover for maximum selection 📦 OUR RANGE (BUY ONLINE AT A GOOD PRICE): Whether it's pallet racking, heavy-duty shelving, high-bay racking, shelving systems, tire racks, or shelving for IBC containers – we deliver and assemble throughout Europe with our OWN team! Including CAD planning, transport, dismantling and assembly. 🏭 TOP BRANDS USED & FROM INSOLVENCY / BANKRUPTCY LIQUIDATION: • SSI Schäfer (Schäfer storage technology, R 3000, PR 600, PR 300) • Jungheinrich (Type MPB, Type E, heavy-duty shelving Jungheinrich) • Wezsuisse Euronorm, Bito RK 4209, Schäfer EK 113, Schäfer RK 521, Schäfer LF 533, Familog SP 6428, R-KLT 4315, RL-KLT 6147, Schäfer KLT 3214, UTZ SILAFIX 3Z, EF 3120, EF 6420 • Cantilever racking (Elvedi cantilever racking, Schäfer, Ohra) • Stow, Meta, Bito, Galler, Nedcon, Voest, SLP, Palflex, Ramada, Bauer, Ohrner 🔨 OUR SECOND PILLAR: ONLINE AUCTIONS & LIQUIDATION For dismantling and clearance orders, we offer a complete all-round service package: 1. Flat-rate purchase: Purchase of merchandise, equipment & complete inventory including a thorough clearance. 2. Commission-based auction: Conducting auctions on behalf of customers. Our full service provided by our own employees: cataloging, office preparation, inspection, goods delivery, logistics, dismantling and thorough handover. Whether you became aware of us through heavy-duty shelving or are looking for galvanized heavy-duty shelving / heavy-duty shelving system, we guarantee the best conditions. Contact us for a non-binding offer!

Condition: new, All-round roller conveyor, type AC 149, total length 640 mm, straight, 0.5 m, 75 mm · For right-angled transverse transport at distribution, turning, or diverting points of roller and roller conveyors · The conveyed goods must have a stable and smooth base and should always rest on at least 3 roller axles · All-round roller conveyors are designed in the same way as roller and roller conveyors and can therefore be easily integrated Kjdpfx As Abvp Eekionc · Design: U-profile frame 20/70/20 mm, galvanized. All-round rollers, Ø 48 mm, made of plastic, grey, with plain bearing, rollers arranged offset from one axle to the next. Note: The conveyed goods must have a dimensionally stable, flat, closed and clean base. · Passage can be folded up for roller and roller conveyors. The standard length of the passage is 1 m. The price is determined by the price of the corresponding conveyor element of 1 m plus the surcharge for the passage (folding mechanism). · Further technical features: Size: straight 0.5 m · Total width: 640 mm Size: straight 0.5 m Pitch (axle distance): 75 mm Total width: 640 mm Conveyor width: 600 mm

Condition: new, All-direction roller conveyors, type AC 149, total width 440 mm, straight 1 m 100 mm * For right-angle transverse transport at distribution, turning, or sorting points of roller and roller conveyor systems * The conveyed goods must have a stable and smooth base and should always rest on at least 3 roller axles * All-direction roller conveyors are adapted in design to roller and roller conveyor systems and can therefore be easily integrated * Design: U-profile frame 20/70/20 mm, galvanized. All-direction rollers, Ø 48 mm, made of plastic, gray, with plain bearings, rollers arranged offset from axle to axle. Note: The conveyed goods must have a dimensionally stable, flat, closed, and clean base. * Passage can be folded up for roller and roller conveyor systems. The standard length of the passage is 1 m. The price is determined by the price of the corresponding conveyor element, 1 m, plus the additional cost for the passage (folding mechanism). * Other technical specifications: Size: straight 1 m * Total width: 440 mm Knjdj Abvn Uopfx Akioc Pitch (axle spacing): 100 mm Conveyor width: 400 mm Total width: 440 mm Size: straight 1 m

Condition: new, Year of construction: 2026, CORMAK SGDCW1000 Industrial Dust Extraction Unit with a Wet (Water) Filter The CORMAK SGDCW1000 industrial dust extraction unit with a wet (water) filter is an advanced device specially designed to work with deburring machines and grinding stations. It is perfectly suited for the safe extraction of dust with an increased risk of ignition and explosion – in particular aluminium dust, as well as during the processing of stainless and mild steel. By immersing contaminated air in water, it effectively neutralizes fire hazards during production processes. Main Advantages and Characteristics of the Device Fire safety: Wet separation of metal dust (aluminium, magnesium) significantly reduces the risk of explosions and ignition of sparks in the deburring machine's extraction system. High filtration efficiency: The extracted air passes through a water tank, where microscopic dust particles are permanently trapped in the tank. Heat recovery: After the cleaning process, the air reaches optimum humidity (approx. 60%) and can be safely returned to the production hall. Durable and robust construction: The device is made of high-quality corrosion-resistant materials and designed for continuous operation under demanding industrial conditions. Easy maintenance: Easy access to the filtration area and water tank facilitates daily cleaning and servicing. Technical Specifications Motor power — 7.5 kW Maximum capacity — 3000 m³/h (at 20°C and a medium density of 1.2 kg/m³) Fan rotational speed — 2900 rpm Maximum pressure — 4600 Pa Weight — 450 kg Filters — Mesh, 2 × 750 × 810 mm Suction inlets — 2 × Ø200 mm Kjdpfx Akez Ahurjisnc Fan outlet flange — Ø180 / Ø225 mm Overall dimensions (W × D × H) — 1400 × 850 × 2170 mm Construction and Standard Equipment The construction of the wet separator has been optimized for perfect cooperation with modern deburring machines and finishing machines. The standard equipment includes: An efficient industrial fan with a high rotational speed, designed to generate high negative pressure. Two advanced mesh filters with dimensions of 750 × 810 mm. A spacious water tank with a drain for water replacement. Ergonomic inspection panels providing continuous visibility of the filtration process. A safe electrical system adapted to stringent industrial standards.

Condition: new, All-directional roller conveyors, type AC 149, total width 540 mm, straight, 0.5 m, 75 mm * For right-angled, transverse transport to distribution, turning, or sorting points in roller and roller conveyor systems. * The conveyed goods must have a stable and smooth base and should always rest on at least 3 roller axles. * All-directional roller conveyors are designed to match the roller and roller conveyor systems and can therefore be easily integrated. * Design: U-profile frame 20/70/20 mm, galvanized. All-directional rollers, Ø 48 mm, made of plastic, grey, with sliding bearings, rollers arranged offset from one axle to the next. Note: The conveyed goods must have a dimensionally stable, flat, closed, and clean base. * Section can be folded up for roller and roller conveyor systems. The standard length of the section is 1 m. The price is determined by the price for the corresponding conveyor element (1 m) plus the additional cost for the section (folding mechanism). * Other technical features: Size: straight, 0.5 m * Total width: 540 mm Conveyor width: 500 mm Pitch (axle distance): 75 mm Size: straight, 0.5 m Knedps Abvpfefx Akioc Total width: 540 mm

Condition: new, All-sided roller conveyor, Type AC 149, overall length 340 mm, straight section 1,075 mm · For right-angled transverse transport to distribution, turning, or diverting points of roller and roller conveyor systems · The conveyed goods must have a stable and smooth base and should always rest on at least 3 roller axles Kodpfx Akj Abvnbeijnc · All-sided roller conveyors are adapted in design to roller and roller conveyor systems and can therefore be easily integrated · Design: U-profile frame 20/70/20 mm, galvanized. All-sided rollers, Ø 48 mm, made of plastic, gray, with plain bearing, rollers arranged offset from axle to axle. Note: The conveyed goods must have a dimensionally stable, flat, closed, and clean base. · Section can be folded up for roller and roller conveyor systems. The standard length of the section is 1 m. The price is calculated from the price of the corresponding conveyor element (1 m) plus the additional cost for the section (folding mechanism). · Further technical features: Size: Straight, 1 m · Overall width: 340 mm Overall width: 340 mm Size: Straight, 1 m Conveyor width: 300 mm Pitch (axle distance): 75 mm

Condition: used, Technical details: Roll lenght: 1200 mm roll diameter: 95 mm total power requirement: 1,5 kW weight of the machine ca.: 2,0 t Kodpfeu Nkv Tsx Akisnc dimensions L x W x H: 4,3x1,5x0,45 m 2 roller conveyor available - construction type: stable angle iron construction - rolls are driven via motor (380V; 2,15A mit 1400 U/min) - rolls are adjustable - conveyor belt size: 4100x1200mm *

Condition: new, Clean air dust collector AL-KO POWER UNIT 350 PLUS P-FU -Exhibition machine- Start-up with frequency converter, Pressure transmitter for demand-based control ----- Technical Data ----- Suction nozzle diameter: 355 mm, Knedpfxs Aaz S As Akisc Nominal volume flow: 7,127 m³/h, Maximum volume flow: 10,000 m³/h, Maximum vacuum: 3,347 Pa, Filter area: 73 m², Chip collection volume: 3 x 250 liters, Number of bags: 3 pieces, Motor 400 V: 15.0 kW, Dimensions (L x W x H): 3,320 x 1,058 x 2,361 mm, Sound pressure level: 73 dB(A), Weight: 1,064 kg, According to: GS - HO - new exhibition machine -

Condition: new, Description The mobile roller chipper RS-120 OFF-ROAD STANDARD is a powerful roller chipper from Remet CNC Technology, powered by a 15 HP LIFAN four-stroke engine. This robust device is capable of processing branches and wood waste with a diameter of up to 9 cm and producing high-quality fuel for various heating systems. The wood chipper is equipped with an electric starter, which simplifies the starting process and ensures reliable operation. The 30 kg flywheel ensures efficient shredding of the wood material and enables uniform and thorough processing. The OFF-ROAD chassis with a sturdy drawbar allows for easy and safe movement of the wood chipper on uneven terrain or in hard-to-reach areas. Technical Data Weight: 380 kg Internal mechanism width: 180 mm Max. cutting diameter (fresh softwood): 90 mm Max. cutting diameter (fresh hardwood): 80 mm Max. cutting diameter (dry hardwood): 70 mm Distance between shafts: 115 mm Blade thickness: 10 mm Gear wheel diameter: 200 mm Housing thickness of the chipping mechanism: 20 mm Cutting blade design: Wear-resistant steel with increased hardness Infeed hopper: 62/38 cm Kedpfx Aks Ab Sgyoienc Tank volume: 3.8 L gasoline Consumption: 2.6-3.9 l/h Engine: LIFAN 190FD, 15 HP, OHV, 4-stroke Cutting length (6 blades): 8-15 cm Flywheel with cover: 30 kg

Condition: new, Description The mobile drum chipper RS-120 OFF-ROAD STANDARD is a powerful drum chipper from Remet CNC Technology, powered by a 15 HP LIFAN four-stroke engine. This robust unit is capable of processing branches and wood waste with a diameter of up to 9 cm and producing high-quality fuel for various heating systems. The wood chipper is equipped with an electric starter, which facilitates the starting process and ensures reliable operation. The 30 kg flywheel ensures efficient shredding of the wood material and enables uniform and thorough processing. The OFF-ROAD chassis with a sturdy drawbar allows for easy and safe movement of the wood chipper on uneven terrain or in hard-to-reach areas. Technical data Weight: 380 kg Internal mechanism width: 180 mm Max. cutting diameter (fresh softwood): 90 mm Max. cutting diameter (fresh hardwood): 80 mm Max. cutting diameter (dry hardwood): 70 mm Distance between shafts: 115 mm Blade thickness: 10 mm Gear diameter: 200 mm Housing thickness of the chipping mechanism: 20 mm Cutting blade material: Wear-resistant steel with increased hardness Infeed hopper: 62/38 cm Tank volume: 3.8 liters of gasoline Kodpj Ab Sg Hjfx Akijnc Consumption: 2.6-3.9 l/h Engine: LIFAN 190FD, 15 HP, OHV, 4-stroke Cutting length (8 blades): 5-10 cm Flywheel with cover: 30 kg

Condition: good (used), Storage location: 3129 Manufacturer: Pulsnitz Year of manufacture: 1979 Machine number: 1308 Type / Model: Sto 5 / 125-1 Capacity: 400 m³/h Maximum negative pressure: 1,250 Pa Density: 1.2 kg/m³ Maximum operating temperature: 50 °C Impeller diameter: 480 mm Suction port diameter: 380 mm Knedpfx Akezmaw Hjijc Connection: 0.37 kW 220/380 V Condition: good Weight: 35 kg Dimensions: 480 x 600 x 1,100 mm

Condition: new, Year of construction: 2025, AL-KO POWER UNIT® 120 M with automatic machine detection Clean air extraction system with H3 certification Intake nozzle: 120 mm Motor rated power: 1.5 kW / 3-phase Voltage: 400 V / 50 Hz Maximum air flow rate: 1,140 m³ / h Nominal air flow rate: 814 m³ / h Negative pressure: 2,180 Pa Filter area: 5.1 m² Chip collection volume: approx. 135 liters Dimensions (L x W x H) in mm: 1,178 x 650 x 1,972 Knjdpfx Akjhkztweijc Weight: approx. 121 kg Location: In stock at warehouse 54634 Bitburg - immediately available -

Condition: new, All-directional roller conveyor, type AC 149, total length 640 mm, straight, 0.5 m, 100 mm · For right-angled, transverse transport at distribution, turning, or diverting points in roller and all-directional roller conveyors. Ksds Abvqcopfx Akionc · The conveyed goods must have a stable and smooth base and should always rest on at least 3 roller axles. · All-directional roller conveyors are designed to match the construction of roller and all-directional roller conveyors, allowing for easy integration. · Design: U-profile frame 20/70/20 mm, galvanized. All-directional rollers, Ø 48 mm, made of plastic, grey, with plain bearings, rollers arranged offset from one axle to the next. Note: The conveyed goods must have a dimensionally stable, flat, closed, and clean base. · Passage can be folded up for roller and all-directional roller conveyors. The standard length of the passage is 1 m. The price is calculated based on the price of the corresponding conveyor element (1 m) plus the additional cost for the passage (folding mechanism). · Other technical features: Size: Straight, 0.5 m · Total width: 640 mm Conveyor width: 600 mm Total width: 640 mm Size: Straight, 0.5 m Pitch (axle spacing): 100 mm

Condition: used, TEDAK 3 Dust Filtration Unit Specifications: Manufacturer: TEDAK AB Country of origin: Sweden Model: TEDAK 3 Knodpfx Aezmd Trokisc Article No.: 111200 Serial No.: 13246 Operating pressure: 30 kPa Electrical control cabinet included Filter housing included Suitable for filtration of wood dust, chips and other dry materials in the woodworking industry

Condition: used, Second-hand 4-roller feed unit with stand from HOLZ-HER, model ETZ, for feeding workpieces in woodworking. The machine is suitable for continuous feeding in various woodworking applications. Kedpfx Aezymtzjkisnc Includes new rubber rollers. Technical data: - Feed speed: 2–30 m/min

Condition: new, All-directional roller conveyor, type AC 149, total width 340 mm, straight length 1 m 100 mm Kodpfx As Abvnnokijnc · For right-angled, lateral transport at distribution, turning, or diverting points of roller and roller conveyor systems. · The conveyed goods must have a stable and smooth base and should always rest on at least 3 roller axles. · All-directional roller conveyors are designed to match the roller and roller conveyor systems and can therefore be easily integrated. · Design: U-profile frame 20/70/20 mm, galvanized. All-directional rollers, Ø 48 mm, made of plastic, gray, with sliding bearings, rollers arranged offset from axle to axle. Note: The conveyed goods must have a dimensionally stable, flat, closed, and clean base. · Lift-up section for roller and roller conveyor systems. The standard length of the lift-up section is 1 m. The price is calculated from the price of the corresponding conveyor section (1 m) plus the additional cost for the lift-up section (folding mechanism). · Other technical features: Size: straight, 1 m · Total width: 340 mm Total width: 340 mm Size: straight, 1 m Conveyor width: 300 mm Pitch (axle spacing): 100 mm

Condition: new, All-sided roller conveyors, type AC 149, total length 440 mm, straight, 0.5 m, 75 mm · For right-angled, transverse transport at distribution, turning, or diverting points of roller and roller conveyor systems. · The conveyed material must have a stable and smooth base and should always rest on at least 3 roller axles. · All-sided roller conveyors are designed to match the roller and roller conveyor systems and can therefore be easily integrated. · Design: U-profile frame 20/70/20 mm, galvanized. All-sided rollers, Ø 48 mm, made of plastic, gray, with plain bearing, rollers arranged offset from axle to axle. Note: The conveyed material must have a dimensionally stable, flat, closed, and clean base. Kjdpfe Abvnujx Akisnc · Passage can be folded up for roller and roller conveyor systems. The standard length of the passage is 1 m. The price is calculated based on the price for the corresponding conveyor element (1 m) plus the additional cost for the passage (folding mechanism). · Other technical characteristics: Size: Straight, 0.5 m · Total width: 440 mm Size: Straight, 0.5 m Pitch (axle spacing): 75 mm Conveyor width: 400 mm Total width: 440 mm

Condition: new, All-direction roller conveyors, type AC 149, total width 540 mm, straight, 0.5 m, 100 mm * For right-angled, transverse transport at distribution, turning, or sorting points of roller and roller conveyor systems * The conveyed material must have a stable and smooth base and should always rest on at least 3 roller axles * All-direction roller conveyors are adapted to the design of roller and roller conveyor systems and can therefore be easily integrated Kedpfs Abvprjx Akijnc * Design: U-profile frame 20/70/20 mm, galvanized. All-direction rollers, Ø 48 mm, made of plastic, gray, with plain bearings, rollers arranged offset from axle to axle. Note: The conveyed material must have a dimensionally stable, flat, closed, and clean base. * Lift-up section for roller and roller conveyor systems. The standard length of the lift-up section is 1 m. The price is determined by the price of the corresponding conveyor element (1 m) plus the additional cost for the lift-up section (folding mechanism). * Other technical specifications: Size: Straight, 0.5 m * Total width: 540 mm Size: Straight, 0.5 m Total width: 540 mm Pitch (axle spacing): 100 mm Conveyor width: 500 mm

Condition: new, Drum cart STA, with VG tires and a support swivel wheel for 200-liter steel drums * Steel tube frame, welded Knjdpfx Ae Acg Sgskioc * Adjustable drum gripper on the double beam * Durable powder coating * Impact and scratch resistant * Wheels, hubs with roller bearings * 1 support swivel wheel Wheel width: 60 mm Tire: Solid rubber Color: brilliant blue, RAL 5007 Suitable for: 200-liter steel drums Load capacity: 300 kg Design: with support swivel wheel Height: 1600 mm Wheel diameter: 250 mm Material: Steel tube Width: 680 mm

Year of construction: 2014, condition: good (used), functionality: fully functional, machine/vehicle number: 3GBG252051-ADK,002,009, The machine is a wood gasifier that converts the gas from wood chips into electricity that is generated from a 6-cylinder GM engine. The machine was acquired as part of the property that includes a boutique hotel. It was subsequently shut down when we did not have the capacity to operate it and the hotel. We expected to once again redeploy it but the base business keeps us too busy to add the operation and maintenance required of the machine. Knodpfe Adl Hrex Akisc

Condition: new, All-directional roller conveyor, type AC 149, total width 340 mm, straight, 0.5 m, 75 mm. * For right-angled, lateral transport at distribution, turning, or diverting points of roller and all-directional roller conveyors. * The conveyed goods must have a stable and smooth base and should always rest on at least 3 roller axles. * All-directional roller conveyors are designed to match the construction of roller and all-directional roller conveyors and can therefore be easily integrated. * Design: U-profile frame 20/70/20 mm, galvanized. All-directional rollers, Ø 48 mm, made of plastic, grey, with sliding bearing, rollers arranged offset from axle to axle. Note: The conveyed goods must have a dimensionally stable, flat, closed, and clean base. * Passage can be folded up for roller and all-directional roller conveyors. The standard length of the passage is 1 m. The price is calculated based on the price for the corresponding conveyor element (1 m) plus the additional cost for the passage (folding mechanism). Kodpfx Ae Abvm Dekijnc * Other technical specifications: Size: Straight, 0.5 m. * Total width: 340 mm. Spacing (axle distance): 75 mm Size: Straight, 0.5 m Conveyor width: 300 mm Total width: 340 mm