Used Efd Induction A.s. Induction Heating System for sale (44,489)

Condition: excellent (used), Year of construction: 2014, Viesmann Vitoplex 100 LS with Weishaupt WM - G10/4A Nsdpfxetrl Sko Afvewk

Condition: used, Year of construction: 2018, Wood chip boiler Schmid UTSK 550, underfeed firing system with a moving grate, output 550 kW, year of manufacture 2018, including feed screw with backfire protection, including infeed screw, including pneumatic cleaning, including flue gas recirculation, including multi-cyclone separator, including ash removal system, including control system for Schmid boilers, including electrostatic precipitator from Meisterfilter, including control system – electrostatic precipitator, including ash removal system for electrostatic precipitator, including flue gas fan. Dismantling must be carried out by the buyer. Not included: - Bunker discharge system - Chimney Nwodjvgcwmopfx Afvsk Information regarding the bunker discharge system: If you are interested in a moving floor or agitator discharge system, I can assist you.

Condition: good (used), Year of construction: 2002, operating hours: 123 h, functionality: unexamined, heating capacity: 350 kW (475.87 HP), Mawera Type FU350RIA, fully automatic wood-fired boiler, bottom-feed firing, output: 350 kW. Hot water system, maximum flow temperature 95°C. Year of manufacture: 2002. Nwedpfxswa Ax As Afvek Parts: boiler body: combustion chamber and heat exchanger, automatic feed screw, multi-cyclone, flue gas fan with piping to the chimney, operating instructions, Logic control system. Already disassembled. Viewing: possible by appointment in Budapest.

Condition: excellent (used), Year of construction: 1995, heating capacity: 200 kW (271.92 HP), We offer a heating system from the renowned Austrian company BINDER. Boiler with a heating output of 200 kW TYPE RRK 150 Stove for biomass, bark, wood chips, and sawdust. Complete set with pumps and valves Nodpfx Afexalfijvjwk

Condition: excellent (used), Year of construction: 2003, Equipment: type plate available, Buderus SB735 low temperature boiler Output: 790kw Year: 2003 Burner: If desired oil or gas burner Weishaupt Viewing by telephone only! Preferential sale to dealers, tradesmen or export. All information without guarantee, subject to errors and prior sale. Nwedpfx Afotuvl Eovok The seller assumes no liability for typing and data transmission errors. Of course we also take care of all formalities Loading possible

Condition: excellent (used), Year of construction: 2002, Fröling boiler Output: 1250Kw Nsdpfxjmnqhrj Afvowk Year: 2002 Burner: Gas or oil burner available on request

Condition: excellent (used), Year of construction: 2011, Buderus GB312 gas condensing boiler Output: 160Kw Viewing by telephone only! Preferred sale to dealers, traders or export. All information without guarantee, subject to errors and prior sale. The seller accepts no liability for typing and data transmission errors. Nsdpfxsmnqb Ej Afvjwk Of course we also take care of all formalities Loading possible

Condition: used, Year of construction: 2009, heating capacity: 400 kW (543.85 HP), We offer a biomass boiler from the renowned company Kohlbach. Biomass boiler 400 kW TYPE K 8 – 400 Nwsdpfx Afsx Daw Uovek Biomass boiler for bark, wood chips, and sawdust. Complete pump and valve set. Multicyclone Fuel feed Heat exchanger from 2009 Optional and available at extra cost: Biomass boiler with movable floor and hydraulic pump

Condition: used, Year of construction: 2013, Industrial heating system, Polytechnik wood chip heating system PR 3500, output 3500kW, year of manufacture 2013, hot water system with a maximum safety temperature of 110°C, operating pressure 3 bar, boiler system with insertion auger, including pneumatic cleaning, including dust separator, including flue gas fan, including control system, including ash removal. Not included: Nedpfevyrwpjx Afvjwk - Bunker system (sliding floor) is not included! - Fuel transport auger to the heating system - Chimney - Electrostatic precipitator The system must be dismantled by the buyer. All system documentation is available. The system can be rolled out as a single unit. After consulting with Polytechnik, the refractory lining can remain in the combustion chamber for transport.

Condition: excellent (used), functionality: fully functional, total length: 1,950 mm, total width: 1,500 mm, total height: 1,500 mm, Selling here a heat recovery system for compressed air systems. Nedpfsp N H Huex Afvjwk Original Atlas Copco. WRG system for compressor. Dismantled due to insufficient compressor performance. Was hardly used :( Atlas Copco ER90 energy recovery unit - details attached as PDF. For water-cooled oil-free ZR compressor Turn your water-cooled, oil-free ZR compressor into an energy source for hot water with ER, our energy recovery unit. Power: 90 kw Special equipment: Reserve water pump - redundancy 2nd heat exchanger - Very good condition. Hardly ever used - poor planning! Unfortunately no documents available.

Condition: excellent (used), LECTROTHERM AJAX TOCCO INDUCTION HEATING Power supply Inductron Inductotherm 330kw Njdpfxsfhnwys Afvewk

Condition: new, Year of construction: 2023, Due to a planning error, I am selling a new, originally packed cantilever discharge system for a Fröhling heating system for 6 m room size with 1 m auger extension Nwodpfxjuq Iy Rs Afvok with separate drive for screw and turntable as 2 motors, ideal for 2 boilers Photo is from another system as mine is still packed

Condition: excellent (used), Year of construction: 1998, Viessmann Paromat-Triplex Output: 225kW Installed in a container. Nwsdpfot Iuyfjx Afvsk Viewing by telephone only! Preferential sale to dealers, tradesmen or export. All information without guarantee, errors and prior sale reserved. The seller assumes no liability for typing and data transmission errors. Of course we also take care of all formalities Loading possible

Year of construction: 2012, operating hours: 3,500 h, condition: used, functionality: fully functional, P System fully automated hydraulic pelleting line with patented hydraulic pelleting system. Mono roller, hydraulically operated with a unique load sensing system. Features automatic vegetable oil injection at startup and shutdown. Continuous rated production 350kg/hr (peak 500kg/hr) - Fully automatic, operates without human intervention. In its current setting it worked 12hrs continuously alongside log production, but can operate continuously if required. Line includes the following:- 50m³ moving floor container with hydraulic operated lid. Material level viewing windows, and unloading cross auger. Nwodpfjzcf Dlsx Afvok Incline discharge auger with magnetic separator. First stage hammer mill for material up to P16 (G30). Pneumatically conveyed to minisolo. Mini silo distribution hub with hydraulic agitator. Equipped with cyclone and transfer fan. The unit has an additional port covered with a blanking plate to allow addition of another pelleting module. Second stage hammer mill and rotary valve controlled by pelleting module. P300 - 30kW pelleting module with PCL control system. All motors other than the main drive are hydraulic and controlled by the pelleting module. The system has a moisture sensor which injects water into the second stage hammer mill to control pellet quality. Die temperature is monitored by a temperature probe and controlled by compressed air injection. Automatic oiling system on startup and shutdown. 6m Discharge cooling and screening auger. Pellets are conveyed, cooled and screened for dust by hydraulically driven auger. Double filter air extraction unit. The line is in good condition and comes with a set of spare parts, dies and rollers. PCL control unit and main drive gearbox were replaced over a year ago. It has been serviced well and can be demonstrated working if required, with your material. Not included in offer, but available by request 4000L pellet hopper made from galvanised steel metal, with pneumatically operated hopper. Semi-automatic bagging plant, 5kg - 30kg capacity. Plastic sack heat sealer. Pellet quality test equipment. 5m Bucket elevator made by Perrys of Oakley.

Condition: used, Year of construction: 2012, power: 110 kW (149.56 HP), Hargassner 110 kW – Biomass Boiler (Pellet / Wood Chip) – 2 Units Available, Cascade Operation Possible For sale is a Hargassner 110 kW fully automatic biomass boiler in a modern design (year of manufacture: 2012). ⚠️ 2 identical boilers available! ➡️ Ideal for cascade operation up to approx. 220 kW ➡️ High operational reliability and optimal performance modulation — Technical Data: • Year: 2012 • Output: 102–109 kW • Combustion output: up to 116.5 kW • Max. temperature: 95 °C • Max. pressure: 3 bar • Water volume: 190 liters • Weight: approx. 1010 kg — Key Features: • Fully automatic operation • Lambda sensor → automatic combustion control • Modulating output (demand-based adjustment) • Automatic cleaning and de-ashing • 3-pass boiler → high efficiency • Fireclay-lined combustion chamber → clean combustion • Automatic grate (self-cleaning) • Very low power consumption (~0.18 kW) • Modern, energy-efficient system Nedpfey A Ei Nox Afvswk — Feeding Technology / Equipment: • Incl. feed auger (standard equipment) • Currently equipped with an automatic pellet suction system (vacuum system/suction feed) ➡️ Very simple pellet operation: • Connection to pellet storage via flexible hose • System automatically draws pellets into the boiler • Fully automatic operation without manual feeding ➡️ Optional: Can also be used for wood chip operation (by connecting to a discharge system) — Condition: • Recently dismantled • Was fully operational until dismantling — Inspection: Viewings are possible by appointment at our 1,500 m² warehouse in Mosonmagyaróvár, Hungary TOP HEATING SYSTEMS – Used Heating Systems, Boilers, Heat Pumps & Accessories Direct from Stock We are a family business with around 20 years of experience in heating technology, boasting a 1,500 m² warehouse in Mosonmagyaróvár, Hungary, with a constantly available stock of approx. 50–60 units. 📍 Location: Our warehouse is located in Mosonmagyaróvár, Hungary – approx. 15 km from the Austrian border and about 80 km from Vienna. Mosonmagyaróvár is the first major city on the Hungarian side after the Austrian border. 🔥 Our inventory includes: • Wood chip boilers • Pellet boilers • Wood gasification boilers • Log wood boilers • Biomass boilers • Oil and gas boilers • Heat pumps • Thermal ventilators • Hot air blowers • Warm air heaters • Industrial heaters • Buffer tanks • Heat exchangers • Feed augers • Discharge systems • Burners • Pumps • Extensive heating accessories ⚙️ Accessories and Components: Additionally, we have a wide range of accessories, including circulation pumps, plate heat exchangers and many other components – from small-scale applications to industrial-scale solutions. 🏭 Brands in our range: Fröling, Hargassner, KWB, HDG, Binder, ETA, Herz, Guntamatic, Windhager, Viessmann, Buderus, and many more. 🌐 Current Offers: Most of our current offers can be found on our website: topheatingsystems.com In addition, we have further units that are not yet listed. 📅 Inspection: A viewing at our warehouse is possible by prior appointment. If you are interested, please contact us – we will help you find the right solution.

Year of construction: 2020, condition: new, Designed for plug in complete system on a mobile stainless steel base plate incl. juice pump, with 63KW Wolf Oil boiler, 2 heatexchanger, heat-holding section for approx. 20-30 second and automatic control. Components: Nwodocx R Ddspfx Afvok Heating circuit, heating pump and expansion tank, 2 heatexchanger for juice preheating / recooling and heation uo to 80°C. 24 m heat-holding section, automatic pneumatic temperature control. Capacity 3000 l juice per hour (depending on juice temperature).

Condition: new, - NEW -without side panel and without baseKanuk® Originalwarm air stove- combustion chamber opening H x W (cm): 31 x 31- flue pipe connection:top / rear- efficiency (%): 83.9- log length (cm): 48- minimum flue draught (Pa): 16- ash box: no- BimSchV stage 2: yes- lignite briquette: no- CE mark: Yes- Total power (kW): 17,7- Room heating capacity (m³): 540- Viewing pane (cm): 24 x 14- Weight (kg): 153- Wood consumption (kg/h): 4,2- Flue gas throttle: No- Type 1 (self-closing door): Optional- Logs, wood briquettes: Yes- AT §15a B-VG standard: Yes- Outside air connection (mm): 80 mm- Dimensions H x W x D (cm): 80 / 58 / 95- Flue pipe connection (mm): 160- Door diameter (cm): 28- Flue gas temperature (°C): 232- Flue gas mass flow (g/s): 14.28- Combustion chamber H x W x D (cm): 40 x 44 x 49.5- Pane flushing: Yes- DIN EN number: 13240- Primary, secondary, tertiary air: Yes- LRV Switzerland: YesNo. 2100108 Njdpfxovyd Awo Afvjwk

Condition: used, Technical details: Heating: 15 kW rated current: 28 A Heating capacity: 15 kW current: max.71 A cooling water consumption: 11 l/min frequency range: 10-25 kHz frequency range: 50/60 voltage: 400-480 +-10% V current- max.: 3020 A weight: 406 kg dimensions L x W x H: 1,25 x 0,8 x 1,6 m The device is a mobile induction heater with medium power (15 kW), suitable for: Local heating of metals (e.g., bearings, bolts, screws, pipes, sheet metal edges). Preheating for welding processes Soldering and shrinking applications Heat treatments (e.g., tempering or hardening of smaller components). Due to its frequency range of 10–25 kHz, the device is more suitable for medium to large workpieces, as the penetration depth at these frequencies is higher than with high-frequency systems. Nsdpfsxfvldex Afvewk *

Condition: excellent (used), Year of construction: 2021, We offer the ETL Prüftechnik ATS 400 X8 automatic test system, designed for electrical and safety testing of products in industrial and laboratory environments. The device is used for, among others: • Quality control (QC) • End-of-line production testing • OEM laboratories and testing stations ⸻ Basic data • Model: ATS 400 X8 • Power supply: 230 V / 50–60 Hz / max. 10 A • Year of manufacture: 03/2021 • Manufacturer: ETL Prüftechnik GmbH (Germany) • Condition: very good, well-maintained equipment • Last factory calibration by ETL: 05/2023 • Weight: 38 kg Nwedoyc H N Nopfx Afvsk ⸻ Equipment / Included in delivery • Main ATS 400 X8 unit with integrated touchscreen display • Windows 10 Pro operating system (OEM) • Complete set of test leads and accessories (as shown in the photos) • Manufacturer’s documentation • Original markings, nameplates, CE certification ⸻ Technical notes • This is a professional test and measurement instrument, not consumer electronics • The equipment is ready for use in a production environment • No signs of tampering; all connectors and interfaces are complete

Condition: used, Year of construction: 2016, functionality: fully functional, A flexible induction bending machine (Liming Electrical & Machinery Factory) for bending and curving tubes (pipes), box sections, wide flange beams, and channels. This 30” capacity induction bending machine was installed in 2017 at our works in Oldbury in the UK. THE MACHINE CAPACITY: Tube / Pipes From Ø165 up to Ø762 6" up to 30" (USA) Beams (easy way & hard way) IPE 600 & HEB 600 W27 x 178 (USA) Box Sections 100 x 100 up to 500 x 500 4" x 4" up to 20" x 20" (USA) Channels UPN 50 up to UPN 400 Nwsdpfx Afsupia Novek C6 x 8.2 up to C15 x 50 (USA)

Condition: used, Year of construction: 2012, Overview  This complete brewhouse was manufactured in 2012 and enables the production of 1,000-liter brews. The system works with steam and includes brewing, fermentation and storage tanks. It is immediately available and is currently installed and ready for operation in the production facility. The seller confirms that the system has worked perfectly until recently. The boilers have a copper coating, while the rest of the system is made of stainless steel. Details - Wort yield: 1,000 liters per brew - Heating system: Steam - Current status: Installed and ready for operation - Availability: Immediately Scope of delivery  - Brewhouse | Mini Brewery System | CI T 10 | 2012 - 2 kettles (mash tun above the whirlpool as one unit + separate boiling kettle) - Steam boiler | Mini Brewery System | - | 2012 (electric) - Plate heat exchanger - Hot water tank | 1,500 L - Reverse osmosis system | ALFA | compact model | - - Capacity: 150-200 L/h - 4x Isobaric fermenter | Mini Brewery System | 1,000L | 2012 - 4x Horizontal isobaric maturation tank | DuoTank | 500 L | 2018 Njdpev Da Dljfx Afvswk - Cooling jacket & bag system for optimum beer preservation

Condition: good (used), Eddytherm 3x induction preheating unit, including accessories. Nwsdpfoy Tnt Eox Afvok

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2011, machine/vehicle number: SN201000003, control type: CNC control, degree of automation: automatic, actuation type: pneumatic, controller model: FANUC Series 16i-LB, laser type: CO₂ laser, laser source manufacturer: FANUC, laser source model: FANUC LASER C4000i-B / C4000i Model B, laser hours: 13,443 h, laser power: 4,000 W, laser wavelength: 106 nm, sheet thickness steel (max.): 20 mm, sheet thickness stainless steel (max.): 12 mm, sheet thickness aluminum (max.): 8 mm, table length: 3,000 mm, table width: 1,500 mm, table height: 300 mm, working length: 3,000 mm, working width: 1,500 mm, working height: 300 mm, travel distance X-axis: 3,000 mm, travel distance Y-axis: 1,500 mm, positioning speed: 170 m/min, positioning accuracy: 0.1 mm, input voltage: 380 V, type of input current: three-phase, type of cooling: water, overall weight: 19,500 kg, total length: 6,000 mm, total width: 2,500 mm, total height: 2,000 mm, Equipment: centralized greasing system, cooling unit, documentation/manual, dust extraction, emergency stop, fume extraction, For sale: CNC CO₂ laser ERMAK / ERMAKSAN LASERMAK 4000.3 x 1.5 – 4 kW Used CNC laser cutting machine for sheet metal, ERMAK / ERMAKSAN LASERMAK 4000.3 x 1.5, is for sale. The machine is equipped with a FANUC CO₂ laser source C4000i-B, 4 kW, and a FANUC Series 16i-LB CNC control system. Nedpfx Afeziluisvowk The laser has a working area of approximately 3000 x 1500 mm and is suitable for cutting carbon steel, stainless steel, and aluminum, depending on the material, thickness, gases used, and machine settings. The machine is equipped with the following main peripheral units: Thermotec chiller, Metal Working srl suction/filtration system, Atlas Copco dryer/air preparation system, and Precitec cutting head. It has an exchangeable/movable table for easier loading and unloading of sheet metal. The machine features two loading tables. Main technical data: Manufacturer: ERMAKSAN MAKINA SANAYI TIC. A.S., Turkey Model: LASERMAK 4000.3 x 1.5 Type: CNC CO₂ laser cutting machine Working area: approximately 3100 x 1500 mm Laser source: FANUC LASER C4000i-B Laser power: 4000 W / 4 kW Max pulse peak power: 5000 W Control: FANUC Series 16i-LB Axes: X-Y-Z-U-V Maximum positioning speed: 170 m/min Power supply: 380 V Electrical consumption: 75–90 kW Dimensions: 5285 x 10480 x 2040 mm Weight: 19,500 kg Cutting head: Precitec Chiller: Thermotec LJ45A35 Suction: Metal Working srl UNIT-POLYGONAL Dryer / air preparation: Atlas Copco CD 25+ Serial number: SN20100003 Laser source production: FANUC, Japan, May 2011 Maximum cutting thicknesses: Carbon steel: up to 20 mm Stainless steel: up to 12 mm Aluminum: up to 8 mm Additional equipment: Thermotec LJ45A35 chiller Metal Working srl suction/filtration system Atlas Copco CD 25+ air preparation/dryer system Precitec cutting head FANUC Series 16i-LB CNC control system FANUC CO₂ laser source C4000i-B Exchangeable/movable table Condition The machine is available and can be inspected on-site. It is sold in its current condition, with all the equipment included. It is suitable for manufacturers of metal products, metal structures, sheet metal components, and companies looking for a powerful CO₂ laser with a large working area. Inspection is possible by prior arrangement.

Condition: used, Year of construction: 1995, functionality: fully functional, Technical condition: Electrical system retrofitted in 2006. Technical details: Control system: Siemens S-5, line control: CP Line Materials processed to date: PE, LLD, PP, PUR Screw diameter: 1 x 80 / 1 x 45 mm Screw length: 24 D Minimum cable diameter: 2 mm Maximum cable diameter: 22 mm Maximum speed: 280 m/min Injection head: included Injection head manufacturer: Erocab Operating voltage: 3x400 V Frequency: 50 Hz Control voltage: 24/230 V Electrical cabinet: included Diameter measuring device: included Plasticizer: included Unwinder: included Rewinder: included Caterpillar, belt, and disc take-offs: included Extruder: included Number of extruders: 2 Cooling trough: included Dancer/accumulator: included Nwodjzf A Npjpfx Afvok Installation length: 70 m Consisting of: ITAL SPA/1250 unwinder NOKIA-MAILLEFER JF 18 unwinder NOKIA-MAILLEFER NMB 80-24D extruder NOKIA-MAILLEFER NMC 45-24D co-extruder NOKIA-MAILLEFER U4A caterpillar ITAL VRR/3-600-63 cooling line ITAL ACO 350 accumulator ZUMBACH DSt.28A.30.KE40-RS spark tester ZUMBACH ODAC 34XY diameter measuring device (hot) Color mixer CAPnet meter counter MAILLEFER caterpillar ZUMBACH ODAC 34XY-Jn-F diameter measuring device (cold) ITAL ACV/350-4.5 dancer Drum flange diameter max: 1200 mm NOKIA-MAILLEFER Bobinoir JF22 rewinder Drum flange diameter max: 2200 mm MAILLEFER JB dancer KBA-Metronic GmbH alphajet printer KBA-Metronic GmbH alphajet printer CAPnet CHA 20 40 caterpillar take-off for accumulator

Condition: like new (used), Year of construction: 2025, operating hours: 2,025 h, functionality: fully functional, machine/vehicle number: 25-168-T-402; 25-068-F-100-P, overall weight: 200 kg, Equipment: documentation/manual, A Soco System packaging line is offered, consisting of an F-100-P bottom flap folding machine and a T-402-5-2-9 carton sealing machine. Minimum carton width: 320 mm, maximum carton width: 520 mm, maximum carton length: 900 mm, machine dimensions X/Y: approx. 750 mm/1150 mm. Soco T-402 5-8-7 carton sealing machine, carton length range: 200 mm-750 mm, carton width range: 120 mm-460 mm, carton height range: 95 mm-470 mm, sealing capacity: 18/min, maximum tape roll diameter: 385 mm, weight: approx. 200 kg. Includes safety guard and powered conveyor belt, 500 mm wide. The system is in new condition, was put into operation in January 2026, and has only operated for approximately 75 days in a single-shift operation. Documentation is available. An on-site inspection is possible. Nedpfezvp Uyox Afvswk