Used Endress Heating System for sale (44,367)

Year of construction: 2013, condition: ready for operation (used), Technical details on demand. Kjdpfx Absg Uwx Re Ielu

Condition: not inspected (used), Year of construction: 2015, functionality: fully functional, type of input current: AC, input voltage: 230 V, We offer this reconditioned Schwank supraSchwank 15 / 2 gas heating system, year of manufacture 2015. Ksdjygbbzopfx Ab Ielu

Condition: excellent (used), Year of construction: 2010, functionality: fully functional, power: 350 kW (475.87 HP), Heating system, heating, chip heating Manufacturer Endress Type USF-W 350 Output 350 kW Klsdpsx E Auzjfx Ab Iju Year of manufacture 2010 with feed with ash discharge with control

Condition: new, - NEW -without side panel and without baseKanuk® Originalwarm air stove- combustion chamber opening H x W (cm): 31 x 31- flue pipe connection:top / rear- efficiency (%): 83.9- log length (cm): 48- minimum flue draught (Pa): 16- ash box: no- BimSchV stage 2: yes- lignite briquette: no- CE mark: Yes- Total power (kW): 17,7- Room heating capacity (m³): 540- Viewing pane (cm): 24 x 14- Weight (kg): 153- Wood consumption (kg/h): 4,2- Flue gas throttle: No- Type 1 (self-closing door): Optional- Logs, wood briquettes: Yes- AT §15a B-VG standard: Yes- Outside air connection (mm): 80 mm- Dimensions H x W x D (cm): 80 / 58 / 95- Flue pipe connection (mm): 160- Door diameter (cm): 28- Flue gas temperature (°C): 232- Flue gas mass flow (g/s): 14.28- Combustion chamber H x W x D (cm): 40 x 44 x 49.5- Pane flushing: Yes- DIN EN number: 13240- Primary, secondary, tertiary air: Yes- LRV Switzerland: YesNo. 2100108 Kljdpfx Abjvyd Awe Ieu

Condition: good (used), Year of construction: 2002, operating hours: 123 h, functionality: unexamined, heating capacity: 350 kW (475.87 HP), Mawera Type FU350RIA, fully automatic wood-fired boiler, bottom-feed firing, output: 350 kW. Hot water system, maximum flow temperature 95°C. Year of manufacture: 2002. Kljdpswa Ax Ajfx Ab Iou Parts: boiler body: combustion chamber and heat exchanger, automatic feed screw, multi-cyclone, flue gas fan with piping to the chimney, operating instructions, Logic control system. Already disassembled. Viewing: possible by appointment in Budapest.

Condition: excellent (used), functionality: fully functional, total length: 1,950 mm, total width: 1,500 mm, total height: 1,500 mm, Selling here a heat recovery system for compressed air systems. Original Atlas Copco. WRG system for compressor. Dismantled due to insufficient compressor performance. Was hardly used :( Kljdpfx Asp N H Husb Iou Atlas Copco ER90 energy recovery unit - details attached as PDF. For water-cooled oil-free ZR compressor Turn your water-cooled, oil-free ZR compressor into an energy source for hot water with ER, our energy recovery unit. Power: 90 kw Special equipment: Reserve water pump - redundancy 2nd heat exchanger - Very good condition. Hardly ever used - poor planning! Unfortunately no documents available.

Condition: excellent (used), Year of construction: 1995, heating capacity: 200 kW (271.92 HP), We offer a heating system from the renowned Austrian company BINDER. Klodpfxexalfis Ab Isu Boiler with a heating output of 200 kW TYPE RRK 150 Stove for biomass, bark, wood chips, and sawdust. Complete set with pumps and valves

Condition: used, Year of construction: 2009, heating capacity: 400 kW (543.85 HP), We offer a biomass boiler from the renowned company Kohlbach. Biomass boiler 400 kW TYPE K 8 – 400 Biomass boiler for bark, wood chips, and sawdust. Complete pump and valve set. Multicyclone Klodsx Daw Ujpfx Ab Isu Fuel feed Heat exchanger from 2009 Optional and available at extra cost: Biomass boiler with movable floor and hydraulic pump

Condition: used, Year of construction: 1995, functionality: fully functional, Technical condition: Electrical system retrofitted in 2006. Technical details: Control system: Siemens S-5, line control: CP Line Materials processed to date: PE, LLD, PP, PUR Screw diameter: 1 x 80 / 1 x 45 mm Screw length: 24 D Minimum cable diameter: 2 mm Maximum cable diameter: 22 mm Kjdpfezf A Npsx Ab Ijlu Maximum speed: 280 m/min Injection head: included Injection head manufacturer: Erocab Operating voltage: 3x400 V Frequency: 50 Hz Control voltage: 24/230 V Electrical cabinet: included Diameter measuring device: included Plasticizer: included Unwinder: included Rewinder: included Caterpillar, belt, and disc take-offs: included Extruder: included Number of extruders: 2 Cooling trough: included Dancer/accumulator: included Installation length: 70 m Consisting of: ITAL SPA/1250 unwinder NOKIA-MAILLEFER JF 18 unwinder NOKIA-MAILLEFER NMB 80-24D extruder NOKIA-MAILLEFER NMC 45-24D co-extruder NOKIA-MAILLEFER U4A caterpillar ITAL VRR/3-600-63 cooling line ITAL ACO 350 accumulator ZUMBACH DSt.28A.30.KE40-RS spark tester ZUMBACH ODAC 34XY diameter measuring device (hot) Color mixer CAPnet meter counter MAILLEFER caterpillar ZUMBACH ODAC 34XY-Jn-F diameter measuring device (cold) ITAL ACV/350-4.5 dancer Drum flange diameter max: 1200 mm NOKIA-MAILLEFER Bobinoir JF22 rewinder Drum flange diameter max: 2200 mm MAILLEFER JB dancer KBA-Metronic GmbH alphajet printer KBA-Metronic GmbH alphajet printer CAPnet CHA 20 40 caterpillar take-off for accumulator

Condition: good (used), axle configuration: 3 axles, permissible axle load (axle 1): 9,000 kg, permissible axle load (axle 2): 9,000 kg, permissible axle load (axle 3): 9,000 kg, first registration: 06/2008, loading space length: 13,860 mm, loading space width: 2,550 mm, loading space height: 4,000 mm, loading space volume: 91 m³, total length: 13,860 mm, total width: 2,550 mm, total height: 4,000 mm, suspension: air, tire size: 385/65-R22.5, wheelbase: 9,010 mm, Year of construction: 2008, Equipment: ABS, = Additional Options and Accessories = - BPW axles - EBS - Rear doors - Air suspension - Disc brakes - Sliding roof = Notes = 2008 SYSTEM TRAILER curtainsider semi-trailer with ABS/EBS, BPW Eco-Plus axles with disc brakes, hardwood floor, 3 supports per side with curtain retainers, sliding roof, rear doors, tires 385/65-R22.5 (tread depth left: 5/7/7 mm; tread depth right: 9/5/8 mm), unladen weight: 6,735 kg, permissible total weight: 39,000 kg, Dutch registration with valid main inspection (APK) until: 10/23/2026 = Additional Information = Axle configuration Tire size: 385/65-R22.5 Axle brand: BPW Eco-Plus Brakes: Disc brakes Suspension: Air suspension Rear axle 1: Max. axle load: 9,000 kg; tire tread depth left: 30%; tire tread depth right: 55% Rear axle 2: Max. axle load: 9,000 kg; tire tread depth left: 45%; tire tread depth right: 30% Rear axle 3: Max. axle load: 9,000 kg; tire tread depth left: 45%; tire tread depth right: 50% Weights Unladen weight: 6,735 kg Payload: 32,265 kg GVW: 39,000 kg Functional Body brand: SYSTEM TRAILER PRS 27 Kledpfxozfp Aps Ab Iju Maintenance, History and Condition APK (Technical Main Inspection): valid until 10/2026 Technical condition: very good Optical condition: average Identification License plate: OL-97-SK Additional Information Please contact Arne Honingh for further information.

Condition: used, axle configuration: 3 axles, first registration: 08/2018, color: other, Year of construction: 2018, Empty weight: 6.939 kg Kedov Ica Djpfx Ab Ijlu The 2018 System Trailer 3 Axle SAF Disc Curtainsider features a galvanized chassis and anti-theft tilt, priced at €11,950 without VAT. It showcases good tire conditions across all axles, enhancing its appeal for heavy-duty transportation needs. The trailer is designed for optimal security and durability, making it a reliable choice for logistics operations. Tire profile dept: Axle 1: left 13 mm right 5 mm Axle 2: left 7 mm right 6 mm Axle 3: left 7 mm right 6 mm

Condition: used, axle configuration: 3 axles, first registration: 01/2012, color: other, Year of construction: 2012, Empty weight: 6.690 kg Kledpfjyxrf Aox Ab Iou Axle 1: left 4 mm right 10 mm Axle 2: left 5 mm right 10mm Axle 3: left 10 mm right 12 mm

Condition: excellent (used), Here, we offer an ETSYSTEM electronic load with GPIB interface. 32615A AC & DC Electronic Load GPIB/RS232, 300V, 108A, 10800VA The 3260A series is a 300V high-performance AC and DC load in a single unit, offering an ideal test solution for UPS, AVR, and DC/AC inverters, especially for devices under test with step or square wave forms. Each AC&DC load in the high-performance series features its own control and display panel and a 5-status recall/memory storage, enabling more efficient load setup. The adjustable power factor setting (PF, range: 1, 0.85 ~ -0.85) expands the simulation of the test environment. The integrated GO/NG measurement device test function provides a quick diagnosis of test results for production and QC test throughput. Features: Voltage, current, power, and VA variable display. CC, linear CC, CR, and crest factor mode. Kjdpozd Uh Ijfx Ab Iolu GPIB/RS232 interface and 5 status recall/memory storage. Power factor (PF) adjustable: 1, 0.85 ~ -0.85. Upper/lower threshold capability. Protection against V, I, W, and ℃. Dual 4 1/2-digit display for voltage, current, power, and VA. Suitable for sine, square, and step waves. Width 600 mm, Height 1506 mm, Depth 600 mm 196 kg Type: 32615A AC & DC Electronic Load Condition: used Scope of delivery: (See picture) (Changes and errors in the technical data, information are subject to change!) We will gladly answer any further questions you may have by phone.

Year of construction: 2012, operating hours: 3,500 h, condition: used, functionality: fully functional, P System fully automated hydraulic pelleting line with patented hydraulic pelleting system. Mono roller, hydraulically operated with a unique load sensing system. Features automatic vegetable oil injection at startup and shutdown. Continuous rated production 350kg/hr (peak 500kg/hr) - Fully automatic, operates without human intervention. In its current setting it worked 12hrs continuously alongside log production, but can operate continuously if required. Line includes the following:- 50m³ moving floor container with hydraulic operated lid. Material level viewing windows, and unloading cross auger. Incline discharge auger with magnetic separator. First stage hammer mill for material up to P16 (G30). Pneumatically conveyed to minisolo. Klsdpfezcf Dlsx Ab Isu Mini silo distribution hub with hydraulic agitator. Equipped with cyclone and transfer fan. The unit has an additional port covered with a blanking plate to allow addition of another pelleting module. Second stage hammer mill and rotary valve controlled by pelleting module. P300 - 30kW pelleting module with PCL control system. All motors other than the main drive are hydraulic and controlled by the pelleting module. The system has a moisture sensor which injects water into the second stage hammer mill to control pellet quality. Die temperature is monitored by a temperature probe and controlled by compressed air injection. Automatic oiling system on startup and shutdown. 6m Discharge cooling and screening auger. Pellets are conveyed, cooled and screened for dust by hydraulically driven auger. Double filter air extraction unit. The line is in good condition and comes with a set of spare parts, dies and rollers. PCL control unit and main drive gearbox were replaced over a year ago. It has been serviced well and can be demonstrated working if required, with your material. Not included in offer, but available by request 4000L pellet hopper made from galvanised steel metal, with pneumatically operated hopper. Semi-automatic bagging plant, 5kg - 30kg capacity. Plastic sack heat sealer. Pellet quality test equipment. 5m Bucket elevator made by Perrys of Oakley.

Condition: ready for operation (used), functionality: fully functional, Dividing plate with pneumatic piston as per the specifications in the photo. In good and functional condition. Specifications are shown in the second image. Kledpfx Abex H Unpo Ieu

Condition: used, Leybold A700 Q deposition system (ebeam) Ksdpfx Abeuhcnij Ijlu Leybold A700 deposition system: Was used for deposition Titanium - Gold (ebeam) Ebeam deposition unit (Leybold) Vacuum pump Leybold D40-65B + Diffusion pump 2kW Proceschamber: Size: Width 680mm x Height 680mm x Depth 550mm Substrateholder diameter 650mm Incl. shielding Oring door Heaters Basepressure low 10-6mbar Electronics: Baseline cabinet (eneeds upgrade) Old PLC (for pump/vent) Gas cabinet/water: Various valves/flow reducers for gas and water Note: D&M Vacuumsystems can upgrade the system to new processes (E-beam or Sputter) incl. new electronics and software. EUR 37.500,-

Condition: used, UHV deposition system (ebeam sputter) UHV deposition system: Was used for deposition Titanium - Gold (ebeam) Ebeam deposition unit is removed Cryopump and prepump is removed Kjdpfx Absuhcn Ns Islu Loadlock: for samples round 75mm Incl. sample heater 450l/s turbomolecular pump (Leybold) Proceschamber: Size: Width 680mm x Height 750mm x Depth 590mm Incl. shielding Double oring door (partially pumped) Heaters Basepressure low 10-7mbar, high 10-8mbar Electronics: Baseline cabinet (e-beam unit removed) Old PLC (for pump/vent) Gas cabinet/water: Various valves/flow reducers for gas and water Note: D&M Vacuumsystems can upgrade the system to new processes (E-beam or Sputter) incl. new electronics and software. EUR 55.000,-

Condition: used, Features: Condition: fully functional, with signs of wear Ideal for rapid material transport Professionally disassembled and packed Manufacturer: Soco System Condition: Used Model/Type: Rollers Drive type: Gravity System consisting of: 7 segments (5 x 1,980 mm, 2 x 960 mm) Total length: approx. 11,820 mm Total width: approx. 470 mm Conveyor width/roller width: approx. 410 mm Segment length: approx. 1,980 mm Roller diameter: approx. 50 mm/rollers made of plastic Axle spacing: approx. 90 mm (adjustable) Material: Steel/plastic Information about the frame: Height: approx. 100 mm Klodpfei Dt Epox Ab Iou Width: approx. 25 mm Stock quantity: 11.82 meters Price per meter Roller conveyor Thanks to the excellent workmanship of the roller conveyor, your material glides smoothly to its destination, even under high load. Tailor-made solutions for your intralogistics For roller conveyors, belt conveyors, inclined conveyors, or telescopes for loading and unloading your goods, we are your competent partner! We will gladly prepare an individual offer for you or advise you on design or assembly questions. Simply let us know your requirements and the local conditions. Benefit from our many years of experience and our excellent network of experts. We have already successfully implemented projects for companies in a wide variety of industries, such as logistics, pharmaceuticals, trades, or the electronics industry. Together, we will develop ways to optimize your processes and material flow in a cost-effective and sustainable manner. We can also offer you fully automatic sorting technology or complementary components such as picking shelves or containers.

Condition: used, Year of construction: 2016, functionality: fully functional, conveyor belt length: 1,000 mm, conveyor belt width: 670 mm, total length: 1,000 mm, total width: 820 mm, total height: 800 mm, power: 0.12 kW (0.16 HP), motor manufacturer: Soco System, Belt Conveyor/ Conveyor Belt/ Belt Conveyor System Manufacturer: Soco System Condition: Used Year of Manufacture: 2016 Overall Length: approx. 1000 mm Overall Width: approx. 820 mm Overall Width without Motor: approx. 670 mm Conveyor Width: approx. 580 mm Ksdpfx Abow A S Sws Ielu Conveyor Height: approx. 800 mm (adjustable) Material: Steel/Aluminium - galvanized Belt Type: Plastic - smooth Color: galvanized, dark blue Including Soco motor (0.12 kW) Including feet (height-adjustable) The conveyor system was operational until disassembly. Thanks to the superior workmanship of the conveyor technology, your material glides smoothly to its destination even under heavy loads. Tailor-made solutions for your intralogistics. For roller conveyors, belt conveyors, inclined conveyors, or telescopic conveyors for loading and unloading your goods, we are your competent partner! We are happy to prepare a customized offer for you or provide advice regarding design or installation questions. Simply let us know your requirements and site conditions. Benefit from our many years of experience and excellent network of professionals. We have already successfully implemented projects for companies in various sectors such as logistics, pharmaceutical industry, trades, and the electronics industry. Together, we will find ways to optimize your process and material flow cost-effectively and sustainably. We can also offer you fully automatic sorting systems or complementary components such as order picking racks or containers. Features: Condition: fully functional, with signs of wear Ideal for fast material transport Professionally disassembled and packed Pick-up address: Industriestraße 5 (47918 Tönisvorst)

Condition: used, functionality: fully functional, roll width: 410 mm, power: 0.12 kW (0.16 HP), roll spacing: 60 mm, axle spacing: 110 mm, Roller Conveyor Curve / 90-Degree Curve Klsdeygyhajpfx Ab Iju Manufacturer: Soco System Condition: Used Model: Roller Type: 90° Total outside width: approx. 1430 mm Total inside width: approx. 820 mm Total width incl. motor: approx. 580 mm Conveying width: approx. 410 mm Roller pitch: approx. 60 mm Axle spacing: approx. 110 mm Roller type: Plastic Material: Steel/Plastic Color: Galvanized, Light Grey, Orange Includes 2 Soco 0.12 kW motors Stock quantity: 4 units Price per unit The conveyor system was fully operational until disassembly. Condition: Fully functional, with signs of use Ideal for fast material handling Internal item number: 2026020302 Pickup address: Industriestraße 5 (47918 Tönisvorst) Professionally dismantled and packaged Thanks to the excellent workmanship of the conveyor system, your materials will glide smoothly to their destination—even under heavy loads. Tailor-made solutions for your intralogistics For roller conveyors, belt conveyors, incline conveyors, or telescopic conveyors for loading and unloading your goods, we are your experienced partner! We are happy to provide you with a customized quote or advise you regarding concepts or installation questions. Simply let us know your requirements and local conditions. Benefit from our many years of experience and our extensive network of specialists. We have already successfully completed projects for companies in various sectors, such as logistics, the pharmaceutical industry, trades, or the electronics sector. Together, we will work to optimize your operations and material flow efficiently and sustainably. We can also offer fully automated sorting technology and additional components such as picking shelves or containers.

Condition: used, REF: MM6436 Kedpfjza T I Hsx Ab Ijlu Chinese 4-head filler with gating system and touch-screen controls. Valves capable of hot filling. Previously used for filling a 500ml syrup product, potentially 250-1000ml range. Electric requirements - 240V / 50 hz / 1 ph. Belt - 82mm. Overall dimensions - 2100mm long x 1030mm wide x 1950mm high. Will need guarding to meet CE spec.

Condition: good (used), axle configuration: 3 axles, permissible axle load (axle 1): 9,000 kg, permissible axle load (axle 2): 9,000 kg, permissible axle load (axle 3): 9,000 kg, first registration: 06/2008, loading space length: 13,860 mm, loading space width: 2,550 mm, loading space height: 4,000 mm, loading space volume: 91 m³, total length: 13,860 mm, total width: 2,550 mm, total height: 4,000 mm, suspension: air, tire size: 385/65-R22.5, wheelbase: 8,970 mm, Year of construction: 2008, Equipment: ABS, = Additional Options and Accessories = - BPW axles - EBS - Rear doors - Air suspension - Disc brakes - Sliding roof = Notes = 2008 SYSTEM TRAILER curtain-sided semi-trailer with ABS/EBS, BPW Eco-Plus axles with disc brakes, hardwood floor, 3 supports per side with curtain holders, sliding roof, rear doors, tires 385/65-R22.5 (tread depth left: 4/8/9 mm; tread depth right: 8/7/7 mm), unladen weight: 6,700 kg, permissible total weight: 39,000 kg, Dutch registration with valid technical inspection (APK) until: 04.10.2026 = Additional Information = Axle configuration Tire size: 385/65-R22.5 Axle brand: BPW Eco-Plus Brakes: Disc brakes Suspension: Air suspension Rear axle 1: Max. axle load: 9,000 kg; Tire tread depth left: 25%; Tire tread depth right: 50% Rear axle 2: Max. axle load: 9,000 kg; Tire tread depth left: 50%; Tire tread depth right: 45% Rear axle 3: Max. axle load: 9,000 kg; Tire tread depth left: 55%; Tire tread depth right: 45% Kedpfxszc Nqvs Ab Iolu Weights Unladen weight: 6,700 kg Payload: 32,300 kg GVW: 39,000 kg Functional Body brand: SYSTEM TRAILER PRS 27 Maintenance, history and condition APK (Technical Inspection): valid until 10.2026 Technical condition: very good Optical condition: average Identification License plate: OK-93-NF Further information Please contact Arne Honingh for more information.

Condition: excellent (used), For sale: Professional automatic Vickers hardness tester Mitutoyo HV-100, made in Japan, in excellent technical and visual condition. The device is equipped with the AUTOVICK automatic measurement system and the Mitutoyo Vision Unit, enabling fast, repeatable and fully automatic hardness measurements without operator subjectivity. Intended for measurement laboratories, quality control departments, manufacturing plants, automotive, aerospace, and toolmaking sectors. —— Key information • Measurement method: Vickers (HV) • Model: HV-100 (series HV-100B / HV-100C / 100D) • Load range: up to 100 kgf • Automatic AUTOVICK system • Integrated Mitutoyo Vision Unit • Automatic impression recognition and HV calculation • Made in Japan • Power supply: 230 V • Stable, heavy-duty laboratory construction —— Technical condition • Device operational and complete • Very good visual condition Ksdpfx Aeyc H I Sob Ielu • Regularly used in an industrial environment • Last technical inspection: 2020 • Ready for immediate operation after connection —— Included in the set • Mitutoyo HV-100 hardness tester • Vision Unit (measuring camera) • AUTOVICK automatic system • Set of weights • Original accessories and holders • Transport cases with equipment • Original Mitutoyo documentation and manuals • Weight: 65 kg

Condition: excellent (used), I am offering a professional DELO dispensing system – DELO-DIV pilot with a DELO-DIV VD450 manual dispenser. This equipment is designed for precise and controlled dispensing of adhesives and various media in industrial applications. The system is ideally suited for use in: • Electronics manufacturing • Automotive sector • Precision assembly • Laboratories and R&D • High-repeatability technical bonding processes Operation is managed via the DELO-DIV pilot touchscreen panel, which allows: • Saving and selection of dispensing programs • Manual dispensing (manual mode) • Precise adjustment of working parameters • Intuitive operator interface The DELO-DIV VD450 manual dispenser ensures high application accuracy and process stability. — Kjdpfx Aboyc H U So Ielu Condition • Used • Fully functional • Normal signs of use • The unit powers on and responds correctly (visible in the pictures) — Set includes • DELO-DIV pilot controller (touchscreen panel) • DELO-DIV VD450 manual dispenser • Cables / connectors as shown in the photos — Additional information • Manufactured in Germany • CE / UKCA marking • Ideal for production facilities and process integrators

Condition: excellent (used), Year of construction: 2024, TBM-D 2009006 – Position Sensor Box / Inclination Sensor Box V3 Manufacturer: TBM SW-Entwicklung und Elektronik GmbH (Germany) Production date: 02/2024 Power supply: 12 V DC, power consumption 70 W Condition: used, very good, fully functional Professional measurement/control box designed for industrial applications. The device is used for handling and processing signals from position/inclination sensors in test systems, automation, and research & development stations. Equipment and features: Klsdpjyc H R Tjfx Ab Ieu • LCD display for parameter presentation • Numeric keypad for configuration and operation • D-Sub communication interface • 12 V power sockets • Robust aluminum housing • CE marking • Device inspected (TBM inspection stickers)