Used Eos Eosint Kunststoff Laser-Sinter-Systems for sale (42,824)

Year of construction: 1998, condition: used, machine/vehicle number: 9086, This Haas laser marking system, model: Vectormark LBA 303 LM1 SM420(2), will be auctioned online as part of our industrial auction / machine auction, featuring laboratory equipment and machinery, laboratory furnishings, workshop equipment, DIY supplies, storage solutions, technical equipment, and more. Iodpez Syg Rjfx Ag Astn You can find this and many other items on our platform.

Condition: used, functionality: fully functional, Year of construction: 2017, operating hours: 12,655 h, type of input current: three-phase, input voltage: 400 V, input current: 32 A, input frequency: 50 Hz, laser power: 70 W, EOS P396 laser sintering system, built 2017, 12,655 laser hours. The machine is operational and located in the Netherlands, available immediately. It last produced a full validation build in April 2026. Photos and video of that build are available on request, and the parts speak for themselves. Included in the sale EOS P396 machine with switchgear cabinet 2x exchangeable build frames Laser chiller (air/water) PA2200 Balance material licence Touchscreen control terminal Lenovo P3 Ultra workstation, Intel Core Ultra 9, 32 GB, Windows 11, installed 2025 Technical Process: SLS, polyamide Laser: 70 W CO2 Build volume: 340 x 340 x 600 mm Software: PSW 3.8 Supply: 400 V, three phase Condition The original control PC failed in 2025 and was replaced with a new Windows 11 workstation, so the control side of this machine has years left in it. It currently runs a touchscreen; the original EOS console and monitor are in storage and can be supplied instead if you prefer the factory configuration. The machine has been maintained throughout its life by EOS and by our own technicians. At the last annual EOS service the laser measured 68.1 W on a 70 W laser, with beam alignment and calibration confirmed. Full EOS service documentation is available to serious buyers. Isdpsz A Sycsfx Ag Ajtn Terms Sold as-is, where-is, ex works. Buyer arranges rigging, crating, transport and insurance. Payment in full before collection. Viewing The machine is in storage and can be viewed by appointment. If you want to see it running, we can recommission it at our facility in Utrecht by arrangement.

Condition: used, Laserline Type: LPC03 Lascon laser system with Lascon controller LPC03 Laserline diode laser The diode laser ›LDM 500-60‹ has a wavelength of 935 nanometers and an output power of 550 watts. Laser type: LDM 500-60 Wavelength of 935 nanometers +/- 10% Laser power: 550 W Supply voltage 100-264V +/- 10% Max. power consumption 1.7 kW Frequency 1 phase 47-63 Hz Laser class 1 Type: LDM 500-60 Itjdpfx Agszdqkro Ajn Lascon controller LPC03 The LPC03 has the processing power of a complete PC in a very small space. Instead of a hard drive, a removable flash disk has been installed. Due to the elimination of the hard drive and the extremely low heat generation, the LPC03 is therefore ideally suited for tasks in the field of measurement, control and regulation in an industrial environment. The fiber-coupled MA pyrometers QP004 and EP004 can be easily integrated into the device. The fiber optic cable is then simply connected to the rear panel. The housing also provides space for the PCI card PCI-1P. In conjunction with the LASCON measurement and control system, the operating system and software are installed on the flash disk. Technical data: Motherboard: Half Size CPU card Slots: 1 x PCI, length max. 180 mm Drives: none Storage medium: removable flash disk Connections: USB front; Ethernet, RS232, VGA, keypad, mouse, USB rear Housing: 212 mm x 80 mm x 250 mm (height x width x depth) Protection class: Front: IP40 Environment: 15°C - 40°C Condition: used Scope of delivery: (See picture) (Changes and errors in the technical data are subject to change!) We will gladly answer any further questions you may have by telephone.

Year of construction: 2025, operating hours: 80 h, condition: used, functionality: fully functional, laser power: 200 W, machine/vehicle number: ELXX-25100004, For sale is a professional, pulsed laser cleaning machine (pulse laser) of the type GL-PM-200 from the manufacturer EraserLaser GmbH. The unit dates back to the 2025 model year, has very few operating hours, and is in excellent, fully functional condition. In contrast to continuous CW lasers, this pulsed system is ideally suited for extremely precise and material-friendly cleaning. It is the ideal solution for demanding tasks where the base material (e.g., sensitive molds, historical components, weld seam preparation, or precision tools) must not be subjected to any thermal influence or material removal. Rust, paint, oils, and oxide layers are removed precisely and without leaving any residue. Isdpfx Agsziww Ao Ajtn Product benefits & highlights: Maximum precision without heat input: Thanks to the fine adjustment of pulse width (20–500 ns) and frequency, the cleaning can be precisely tailored to sensitive surfaces. Compact & flexible: The laser is housed in a robust enclosure and can be ideally used in mobile applications. Extensive parameter control: Parameters such as laser power, scan speed, frequency, and track density (Spiral Series) can be precisely controlled via the intuitive 7-inch touch display. Quick access to memory locations: Up to 5 user-defined work modes can be saved to allow quick switching between different cleaning requirements in everyday work. Easy maintenance & care: Low maintenance thanks to reliable air cooling. Integrated preview laser for precise alignment of the cleaning area on the workpiece. Technical data at a glance: Model: GL-P-M-200 Laser type: Pulsed fiber laser (pulse laser), Laser Class 4 Wavelength: 1064 nm Laser power: 200 watts (continuously adjustable from 10% to 100%) Laser frequency: 5 kHz – 4000 kHz Pulse width: 20 ns – 500 ns Cleaning area (length x width): Variable, adjustable up to 100 mm x 20 mm Fiber length (hose assembly): 4 to 10 meters Cooling: Air-cooled Power connection: 220V AC (Schuko plug, fuse rating min. 16A) Condition & scope of delivery: Condition: Very well-maintained, used condition, hardly used, visually and technically flawless. The protective lens and optics are clean and fully functional. Scope of delivery: Laser cleaning system GL-P-M-200 including hose assembly and cleaning gun. Important safety note: Operating a system of Laser Class 4 requires the mandatory use of approved laser safety goggles (DIN EN 207 for the wavelength range of 1064 nm) as well as compliance with applicable occupational safety regulations (including respiratory protection/extraction).

Year of construction: 2025, operating hours: 80 h, condition: used, functionality: fully functional, laser power: 1,500 W, machine/vehicle number: ELKY-2504021, For sale is a professional, continuous laser cleaning machine (Continuous Wave) of the type GL-C-CWM-1500, manufactured by EraserLaser GmbH. The unit was manufactured in 2025, has very few operating hours, and is in excellent, fully functional condition. This system is ideally suited for the fast, thorough, and non-contact removal of rust, paint, oils, grease, and oxide layers from metallic surfaces. Thanks to its high power of 1500 watts and the particularly long hose package, the unit offers maximum flexibility in professional workshop or industrial environments. The exact, cumulative operating hours can be read transparently directly on the system display. Product advantages & highlights: High flexibility: The 15-meter-long fiber optic hose package enables comfortable working, even on large components, in hard-to-reach areas, or on scaffolding. Precise control: Parameters such as laser power, frequency, and beam width can be set precisely via the intuitive 7-inch touch display and saved as presets. Gentle surface treatment: The variably adjustable pulse rate allows the heat input to be regulated precisely – also ideal for more sensitive workpieces or thin sheets. Reliable cooling: An integrated Hanli water cooling system ensures stable temperature monitoring and enables trouble-free operation in continuous mode. Ergonomic cleaning gun: Equipped with a red preview laser for accurate alignment of the cleaning area and an automatic compressed air control to protect the optics from dirt particles. Technical data at a glance: Model: GL-C-CWM-1500 (mobile steel housing on heavy-duty rollers) Laser type: CW fiber laser (Continuous Wave), laser class 4 Wavelength: 1070 nm Laser power: 1500 watts (continuously adjustable from 10% to 100%) Laser frequency: 1000 Hz – 9000 Hz Cleaning width: 1 mm to 150 mm (variably adjustable) Fiber length (hose package): 15 meters Power connection: 220V AC / 32A connection (protected with 25A) Condition & scope of delivery: Condition: Very well-maintained used condition, low operating hours, optically and technically flawless. Protective lenses and optics are clean and fully operational. Scope of delivery: Laser cleaning system GL-C-CWM-1500 including 15m hose package and cleaning gun. Isdpfx Agsziwwio Aotn Important safety note: The operation of a system of laser class 4 requires the mandatory wearing of approved laser safety glasses (DIN EN 207 for 1070 nm) as well as compliance with applicable occupational safety regulations (including extraction).

Condition: new, SLS Materials for Industrial & Compact SLS 3D Printers High-performance SLS powders for professional additive manufacturing – compatible with a wide range of industrial and compact SLS 3D printers, including EOS, Formlabs, Sinterit, Sintratec, Nexa3D, and Raise3D systems. Our SLS powders undergo extensive in-house testing to ensure reliable processing, excellent mechanical properties, and consistent print quality across multiple machine platforms. Designed for both industrial production and compact SLS systems, IM3D materials deliver professional performance without restricting you to a specific ecosystem. Available Materials PA12 Balance – €45/kg Cost-effective, all-purpose PA12 powder with excellent refresh behavior and reliable mechanical properties. PA12 Performance – €49/kg Enhanced PA12 material with improved elongation at break and increased impact resistance for demanding functional applications. PA12 Glass Filled (PA12-GF) – €44/kg Stiff, dimensionally stable PA12 material reinforced for tooling and engineering parts. TPU88A – €45/kg Flexible SLS material with excellent elasticity, durability, and impact resistance. Machine Compatibility Compatible with a broad range of SLS systems, including: EOS / EOSINT: P100, P110, P350, P360, P380, P385, P390, P395, P396, P450, P500, P700, P730, P760, P770 Formlabs: Fuse 1, Fuse 1+ Sinterit: Lisa, Lisa Pro, Lisa X, Suzy Sintratec: Kit, S1, S2, S3 Nexa3D: QLS230, QLS236, QLS260 XYZ Systems: MfgPro230 xS, MfgPro236 xS Raise3D: RMS220 SLS4All Innova MK1 Loopzizo K-100 More compatibility information: im3d.shop/printer-compatibility OEM Material Alternatives We offer alternatives and/or drop-in replacements for materials from Formlabs, Sinterit, Sintratec, and Raise3D, including: Formlabs PA11, PA12, PA12 Tough, PA12-GF, TPU90A Sinterit Flexa Performance, PA11 Onyx, PA11.5, PA12 Eco, PA12 Industrial, PA12 Smooth Sintratec PA12, PA12-GF, TPU88A Raise3D PA Next, PA Next GB, PA11, PA12, PA12 GB, TPU86A, TPU90A OEM comparison overview: im3d.shop/compare/oem Why Choose IM3D SLS Materials? Broad compatibility across industrial and compact SLS systems Excellent refresh rates and low cost per part Stable processing and consistent print quality Industrial-grade performance without vendor lock-in Itjdsy Til Ajpfx Ag Aon In-house tested and production validated Technical onboarding and support available Fast shipping from the Netherlands

Condition: repair required (used), Power supply for lamp-pumped lasers, marking lasers, control card, input card, control Iodpfsda Ny Nox Ag Astn -Manufacturer: SLS Spectron Laser Systems -Control comes from a marking laser -Type: Handling Gretag Laser 6211 -Control is sold untested from stock, so as a spare parts carrier -Dimensions: 482/540/H178 mm -Weight: 11 kg

Condition: used, Wente CamSorik GmbH Laser measuring system / 3D laser measuring camera Wente CamSorik LaserCam_hs LC691103 Complete laser measuring system with tripod system, laptop, LaserCam_hs software, and documentation For sale is a used laser measuring system from the manufacturer Wente CamSorik GmbH. The system is suitable for non-contact measurements, 3D measurement technology, quality control, position detection, as well as industrial measuring and automation tasks. Technical data: Manufacturer: Wente CamSorik GmbH Model: LaserCam Type: LaserCam_hs Serial number: LC691103 Year of manufacture: 2018 Made in Germany Laser class: 2 Wavelength: 630–690 nm Laser power: < 1 mW Standard: EN 60825-1:2007 Network interface: Ethernet (RJ45) IP address: 192.168.1.121 Dimensions of sensor unit (approx.): 620 × 240 × 240 mm (L × W × H) Total weight including accessories and tripods: approx. 28 kg Software / Laptop: Acer TravelMate laptop LaserCam_hs Version 7.2.10.555 Wente CamSorik GmbH LaserCam_high speed documentation available Equipment: LaserCam_hs sensor unit COLA receiver / transmitter LED ring light Ethernet interface Industrial connector 2 × Manfrotto professional tripods Acer laptop including power supply LaserCam_hs software Documentation Connection cables and accessories as shown in the pictures Application areas: Industrial measurement technology 3D measurement technology Quality control Robotics and automation Research and development Production monitoring Scope of supply: Wente CamSorik LaserCam_hs LC691103 2 × Manfrotto professional tripods COLA receiver / transmitter Itjdpfx Aez Ndq Hog Aen Acer TravelMate laptop including power supply LaserCam_hs software version 7.2.10.555 LaserCam documentation Connection cables and accessories as shown in the pictures Condition: Used Laptop and LaserCam_hs software have been started. Optical condition as shown in the pictures. Normal signs of wear and tear. The table shown in the photos and other items not explicitly mentioned are not included in the sale. Shipping by freight forwarder is possible. Subject to change, errors and prior sale. We will gladly answer any further questions by telephone.

Condition: used, Bluhm Systems Type: e-SolarMark FL Marking laser, fiber laser e-SolarMark FL. No functional guarantee (untested). Introduction: The e-SolarMark FL10W and 30 W are laser systems of Class IV according to the IEC 825 and EN 60825 guidelines (standards for applications with end customers). It is designed to be integrated into a system or operated separately with a protective housing. After installation, the laser system must meet the requirements for a product with a specific protection class, according to the aforementioned guidelines. The e-SolarMark is a laser system for marking and engraving plastics, metals, and foils, both stationary and in motion. Technical Specifications e-SolarMark Description The e-SolarMark system consists of two main components: 1. The marking unit with laser head (scanning head) with focusing lens. 2. The control unit includes the power supply, electronic control system, and firmware for system function, with I/O slots inside. The e-SolarMark includes a fixed galvo scan head, equipped with a lens for a square marking field with standard dimensions of 70 x 70 mm. Laser Specifications (Standard Version) Laser Type - Fiber Laser Laser Output Power - FL2 Model: 19W; typical Wavelength - 1062 nm typical Internal Modulation - 20 to 80 kHz Scanner Head Description: Scan Head - Two galvanometric mirror scanners with a hard, highly reflective dielectric coating. F-Theta Lens Types and Their Properties: Lens - Marking field 70x70 mm to 300 x 300 mm Focal distance - 192 mm Operating Environment Conditions: Relative humidity up to 80%, non-condensing Operating temperature 5 - 40°C Recommended operating temperature 15-25°C Dimensions W x H x D Laser unit 122 x 108 x 495 mm Control unit 520 x 380 x 215 mm Cable length, marking/control unit 3 m Weight, marking unit 5 kg Weight, control unit 15 kg Mains voltage 115/230 VAC. 50/60 Hz, single-phase. Iedpfxozgci Ee Ag Aetn Power consumption, FL2 model 450W Condition: used Scope of delivery: (See picture) (Subject to changes and errors in the technical data!) We will be happy to answer any further questions you may have by telephone.

Operating hours: 43,927 h, condition: good (used), FOBA Laser FOBALAS 94S Nd:YAG laser marking system, marking laser FOBALAS F 94S laser marking system Laser type: FOBALAS 100 CW/Q-switch - Nd:YAG Power class 4 P max = 120 W 1.064 μm Isdpew U Timjfx Ag Ajtn XY/2-100 HPM Type: Foba Volts: 15 V Wavelength 1064 Operating hours: 43927 You can find more items – new and used – in our shop! International shipping costs available upon request!

Condition: used, Trumpf HAAS Type: HAAS Laser HL556D Wavelength of laser light: 1064 nm Minimum power: 5 W Maximum regulated power: 550 W Beam parameter product: 25 mm-mrad External dimensions: Width 1250 mm, Height 1580 mm, Depth 720 mm Power cable with plug: Length: 5.5 m Plug: CEE round plug, 5-pole, 63 A, 6h Cooling water hoses: Connections for supply and return: 1 inch The hoses are connected to the connections and sealed with two hose clamps each. Electrical interfaces: Itedpfxezdrwgj Ag Aen Serial interfaces for service purposes Ethernet interface for operating PC Interface of the analog input card ASV interfaces for safety circuits Output for measured values of the laser power Interface for connecting the control panel Emergency stop interface Electrical connection values: Mains 20 V ± 10 %, 3P + PE, 50 Hz 20-01-38-00 V ± 10 %, 3P + PE, 60 Hz Scope of delivery: (Laser system, laser head, and replacement cable…) (Changes and errors in the technical data are subject to change!) We will gladly answer any further questions you may have by telephone.

Condition: good (used), FOBA FD84S sensor for YAG laser marking systems For sale is a used FD84S sensor from the manufacturer FOBA. This sensor is intended for use in YAG laser marking systems. Technical details: Manufacturer: FOBA Model: FD84S / S50 Design: Sensor / laser control component Laser class (system application): 4 Wavelength: 1064 nm Laser power (system application): 70 W Pulse power: 10 kW Iedpexlq Exjfx Ag Aotn Pulse duration: 70 ns Application area: Spare part / component for FOBA laser marking systems Condition: Used, functional Buy FOBA FD84S sensors and other items at affordable prices – Buy from the professional for the professional – You will find other attractive offers in our SHOP.

Year of construction: 2007, condition: excellent (used), We offer a complete Laser marking machine: - DOMINO DSL1 laser - Cabin according to protection class 1 - axis for rotation - conveyor belt - computer the tipe of laser: DOMINO DSL1 10-60 Laser power: 10 W. Lasertype: closed CO2 laser, 30000 hours medium failure-free time Characters per second: 400 (depending on the product material and system configuration) character height: 0,5 - 120 mm (0,02 - 119,89 mm) focal length: 100 mm (208 mm optional) labeling field: 60 x 60 mm Font: Pseudo-True Type laser head: construction made of stainless steel and aluminum operating temperatur: 15 - 38 C cooling: air Dynamark-Software The following materials can be marked by a CO2 laser: Itjdsd N Hguepfx Ag Aon - Painted or coated metals - Glass - ceramics - Carton - Different types of plastic

Condition: new, Scanlab PowerScanII 50i Aperture 50 mm Angle encoder, galvanometer scanner, analog position detector Optics, wavelength ranges (standard): 9400 nm, 10600 nm Max. laser power: 2500 W @ 9400 nm, 10600 nm Typical deflection angle: ±0.35 rad (optical) Dynamics, number of installed tunings: 1 Typical tuning: Fast-Vector Tuning Settling time: < 0.45 ms Positioning speed (f = 160 mm): 20 rad/s Step response (100% full deflection) 1% full deflection: 1.0 ms 10% full deflection: 4.5 ms Accuracy Repeatability (RMS): < 4 µrad Position resolution (max.)*: 18 bits for XY, 16 bits for Z * Non-linearity: < 2.1 mrad / 44° 8-hour drift (after 30 min.) Offset: < 50 µrad Gain: < 50 ppm Electrical / Control Control: Galvanometer scanner Digital controller card Isdpfxezikb Uo Ag Aotn Control interface (alternatives): Digital SL2-100 Extended diagnostic options: Yes (iDRIVE) Supply voltage: (48±2) V DC, max. 10 A each (20 A peak current) Mechanical Scan axes: 3-axis system with integrated varioSCAN Housing options: Scan head Connector positions relative to beam exit Weight without lens (standard housing): 35 kg Size (L x W x H) (standard housing): (433 x 268 x 266) mm³ (with varioSCAN) Beam offset: 72.72 mm Other equipment Water cooling: Yes Air cooling: Yes Other specifications Operating temperature: 25 °C ± 10 °C Deviation of the deflection angle: < 5 mrad Deviation from the zero position: < 5 mrad Condition: used Scope of delivery: (See image) (Changes and errors in the technical data are subject to change!) Shipping & Pickup: Secure shipping on a pallet (upon arrangement) or local pickup possible. We will gladly answer any further questions you may have over the phone.

Condition: used, functionality: fully functional, Year of construction: 2017, control type: CNC control, controller manufacturer: Bystronic, controller model: ByVision, laser type: CO₂ laser, laser source manufacturer: Bystronic, laser source model: ByLaser 6000, laser power: 6,000 W, laser wavelength: 10,600 nm, sheet thickness steel (max.): 25 mm, sheet thickness stainless steel (max.): 25 mm, table length: 3,000 mm, table width: 1,500 mm, working length: 3,000 mm, working width: 1,500 mm, travel distance X-axis: 3,048 mm, travel distance Y-axis: 1,524 mm, travel distance Z-axis: 80 mm, positioning speed: 120 m/min, positioning accuracy: 0.1 mm, repeat accuracy: 0.05 mm, workpiece weight (max.): 890 kg, type of cooling: water, overall weight: 15,000 kg, Equipment: cooling unit, documentation/manual, nozzle changer, safety light barrier, BYSTRONIC BYAUTONOM 3015 - 6 KW CO2 LASER CUTTING SYSTEM WITH SHUTTLE TABLE | YEAR 2017 The Bystronic ByAutonom 3015 (year 2017) is a CO2 laser cutting system with 6 kW resonator power for sheets up to 3000 x 1500 mm. It combines a ByLaser resonator with the ByVision control and a shuttle table system. With automatic nozzle and lens-cassette changer, low-manning continuous operation in multi-shift production is possible. CONDITION - Condition: Used. Functional scope as per the technical data below. - Details on the technical condition individually upon serious interest. - Viewing possible by arrangement (no demonstration under power). - Condition/Maintenance Messenger on board: reports machine status and maintenance intervals. FUNCTION & APPLICATION Laser beam cutting (LBC) with flying optics - the cutting head moves over the stationary sheet. It processes structural steel, stainless steel and aluminium. The shuttle-table system allows loading and unloading during ongoing cutting. Cutting programs run via ByVision; the system is prepared for Bystronic automation (ByTrans Extended). Applications: metalworking industry, plant and apparatus engineering, structural steelwork, precision-part manufacturing. TECHNICAL DATA - Bystronic ByAutonom 3015 | Laser type: CO2 | wavelength 10.6 micrometres | flying optics - Laser power: 6,000 W (resonator ByLaser 6000) | Year: 2017 - Nominal sheet format: 3000 x 1500 mm | cutting range X 3048 / Y 1524 / Z 80 mm - Max. workpiece weight: 890 kg - Max. material thickness structural steel: 25 mm - Max. material thickness stainless steel: 25 mm - Max. material thickness aluminium: depends on power class and configuration, confirmed during inspection - Positioning speed approx. 120 m/min | axis acceleration 30 m/s2 - Positioning accuracy +/- 0.1 mm | repeatability +/- 0.05 mm - Drive: linear drives Y/Z, high-torque motors X | Machine weight: 15,000 kg - Installation dimensions approx. 12,800 x 6,300 x 2,400 mm (equipment-dependent) - CNC: Bystronic ByVision | touchscreen + manual control unit - Automatic nozzle and lens-cassette/cutting-head changer (standard) | Shuttle-table system - Automation: ByTrans Extended compatible | Condition/Maintenance Messenger | Safety light barrier Serial number, connected load, gas/compressed-air demand and chiller capacity on request. SCOPE OF DELIVERY - 1 x Bystronic ByAutonom 3015 (CO2 laser cutting system) Iodsydq Hnjpfx Ag Aotn - 1 x CO2 resonator ByLaser 6000 (6,000 W) - 1 x Bystronic ByVision CNC control with touchscreen and manual control unit - 1 x Automatic nozzle changer | 1 x Automatic lens-cassette changer - 1 x Shuttle-table system | 1 x Chiller (water circuit) - 1 x Machine documentation LOGISTICS & LOCATION Location: Ulft (Netherlands), directly at the German border. Dismantling, transport, installation and commissioning by ASM by arrangement - individually calculated upon request. ABOUT ASM Arendsen Steel Machinery (ASM) trades in structural-steel and sheet-metal processing machinery. Further machines on request. CONTACT / INQUIRY Viewing by arrangement | Price on request. Sale exclusively to commercial customers (B2B).

Condition: used, IPG Type: YLS - 5000 Description: IPG Ytterbium laser system YLS-5000-S1T 5 kW laser power Compact footprint Highly efficient ECO modules Compatible with all types of processing heads Independent power control via fieldbus interface Extended IPG power supply with integrated safety features Laser emission ON watchdog Data: YLS-5000-S1T 400-460V AC 3P/PE 50/60Hz 59A 63A/80kA Year of manufacture: 2011, Serial number: 11101050 RIEDEL PC 250.01-NZ-DIS Chiller Refrigerant: R407c, Power connection: 40/42.5A Condition: used Scope of delivery: (See picture) (Subject to change and errors in the technical data and information!) Itedpfxjzg Evuj Ag Aon We would be happy to answer any further questions you may have by telephone.

Condition: used, functionality: fully functional, Year of construction: 2005, operating hours: 84,893 h, machine/vehicle number: A0420A0151, control type: CNC control, controller manufacturer: Siemens, controller model: Siemens Sinumerik 840D (TRUMPF MMC), laser type: CO₂ laser, laser source manufacturer: TRUMPF, laser source model: TLF 3200, laser hours: 32,832 h, laser power: 3,200 W, type of cooling: water, year of last overhaul: 2019, Equipment: cooling unit, dust extraction, emergency stop, fume extraction, TRUMPF Trumatic Lasercell 1005 – 3D Laser Welding System (3.2 kW) Used, ready-to-use 3D laser welding system (Type TLC 1005) Special modification for 3D laser welding (adapted beam guidance) Laser cutting is not possible in the current configuration Special version with a powered rotary table for highly precise round and multi-sided processing Basic data & performance: Manufacturer: TRUMPF Laser- und Systemtechnik GmbH Model: Trumatic Lasercell 1005 (Type TLC 1005) Year of manufacture: 2005 Laser power: 3,200 W (Resonator TRUMPF TLF 3200) Serial number: A0420A0151 Connected load: 68 kVA Operating hours: Processing time (beam on): approx. 32,832 h (pure welding time with active laser beam) Operating time (laser on): approx. 84,893 h (total operating time of the resonator incl. standby) Iedjz Rzikepfx Ag Astn Condition, scope of delivery & history: Scope of delivery includes cooling unit (chiller) and Herding dust extraction/ventilation system (Type DELTA 1200-12/9 SC, year 2004) The system was taken over from a VW plant in 2019 Professional installation, technical commissioning and inspection carried out by GIMTAS in September 2019 Sale & processing: On-site inspection possible after prior arrangement Price negotiable Dismantling and transport preferably carried out by the buyer

Condition: used, Year of construction: 2025, machine/vehicle number: 202530090, total width: 800 mm, total height: 1,200 mm, total length: 800 mm, overall weight: 85 kg, scan area length: 150 mm, scan area width: 150 mm, laser wavelength: 1,064 nm, Laser system for marking, housing with manual lift-up door, focus laser for determining the focus position, Z-axis (software-controlled), rotation unit (360°), mobile extraction unit (Vaupel LAB-1f, 210W, serial no.: CP24-52-1-0209, year of manufacture: 2024). The condition is evident from the attached expert report. Itjdpjzvm Tgsfx Ag Asn

Condition: used, Trumpf Vectormark Itsdpfx Aszdqcueg Asn Type: VMc2 Trumpf Vectormark laser marker with Fuchs extraction and filtration units Trumpf Vectormark GREEN 532nm Trumpf VMc2 Laser marker, with frequency-doubled, diode-pumped Nd:YAG laser with Hurryscan 10 – galvo head from Scanlab Fuchs extraction and filtration units TKFD The integrated pre-separator ensures high filter capacity Different filter stages are possible and can be perfectly adapted to individual requirements Ideal for confined spaces – can be placed under a table or integrated into machines Welding fume extraction class W3, IFA certified TKFD can also be transported in the trunk without modification Condition: used Scope of delivery: (See picture) (Changes and errors in the technical data are subject to change!) We would be happy to answer any further questions you may have by telephone.

Condition: used, Panasonic SUNX Type: LP-431-C Laser Marker Product Features: Itodpfx Aszdqpzsg Ajn Class 4 CO2 laser Micro-marking Wavelength: 10.6 microm, 0.417 mil Laser power, continuous wave: approx. 30 W Speed: 240 m/min or less Weight of marking head: 20 kg Weight of control unit: 12 kg Marking field size with process area cover: 0-55 mm or 0-2.2 inches Permissible ambient temperature: 0 - 40 degrees Celsius Permissible humidity: 35% - 85% Requires 90V to 132VAC, 180V to 264VAC, 50/60Hz Air-cooled Printing options: letters, numbers, katakana, hiragana, kanji, symbols, up to 50 user-defined characters, QR Code, Micro QR Code, Data Matrix, GS1 Data Matrix, and bar codes Condition: used Scope of delivery: (See image) (Subject to change and errors in technical data and specifications!) We will gladly answer any further questions you may have over the phone.

Condition: used, EOS / Transitube Powder conveying system / dosing system EOS Transitube DCL 800/30 PM Automatic powder conveying and dosing system for two components For sale is a used powder conveying system from the manufacturer Transitube / tim plast Anlagenbau GmbH. The system is used for the continuous dosing, conveying, and homogenization of powders, ground materials, or granules and is ideally suited for plastics processing, extrusion, and injection molding. Technical data: Manufacturer: transitube / tim plast Anlagenbau GmbH Type: DCL 800/30 PM Designation: EOS powder conveying system Dosing system for 2 components 2 material containers, each approx. 400 liters Continuous dosing and mixing Materials: Powder Granulate Ground material / regranulate Power connection: 3/N/PE 400 V AC Frequency: 50 / 60 Hz Connected load: 2.0 kW Weight: approx. 180 kg Dimensions (approx.): Width: 1850 mm Depth: 900 mm Height: 1320 mm Dosing capacity, model-dependent: approx. 50 to 2,000 kg/h Dosing accuracy: ±0.5 to ±2 % Dosing range: 5 to 50 % Additive dosing: 0.2 to 10 % Equipment: 2 dosing containers with hinged lids Automatic control cabinet with touch panel Transitube conveying and mixing system Electrical control Screw dosing Pneumatic components Flowserve Automax actuators Conveying motor with gearbox Various conveying hoses Piping Itsdpozn H D Nofx Ag Ajn Accessories as shown in the pictures Application areas: Plastics industry Extrusion Injection molding Powder conveying Material dosing Regranulate dosing Mixing systems Production automation Condition: Used Visual condition as shown in the pictures. Scope of delivery as shown in the pictures. Scope of delivery: 1x EOS Transitube DCL 800/30 PM powder conveying system Complete control cabinet Conveying units Motors Pneumatic components Hoses Piping system Accessories as shown in the pictures Important note: The system is sold as shown in the pictures. Please note the scope of delivery in the photos. Tables, tools, or other aids that may be visible in the pictures are not included in the scope of delivery unless explicitly stated. Shipping via freight forwarder is possible. Inspection is possible at any time by appointment. Subject to prior sale and errors. If you have any questions, please do not hesitate to contact us by telephone.

Condition: used, Brüel & Kjær LDS Dactron Iodpfx Agjzrtylj Ajtn Shaker Control System / Vibration Testing Controller LDS Dactron LASER USB LAS 200 Controller for electrodynamic vibration testing systems For sale is a used Shaker Control System from the manufacturer Brüel & Kjær LDS Dactron. The system is suitable for controlling electrodynamic shaker systems for vibration, resonance, random, and shock tests in research, development, and quality assurance. Technical data: Manufacturer: Brüel & Kjær LDS Dactron Type: LASER USB Model: LAS 200 Device type: Shaker Control System / Vibration Testing Controller Country of manufacture: Made in U.S.A. Mains connection: 100–240 V AC Mains frequency: 47–63 Hz Power consumption: 1 A Analog inputs: 8 × BNC Outputs: 2 × (Drive / COLA) USB interface Digital I/O Master/Slave interfaces Emergency stop connection Calibration: Calibrated: 09/12/2023 Due: 09/11/2024 Dimensions: approx. 430 × 350 × 90 mm (W × D × H) Weight: approx. 6–8 kg Equipment: USB license dongle Power cable 8 measurement inputs USB interface Digital I/O Documentation as shown in the pictures Application areas: Vibration testing Oscillation testing Random tests Resonance tests Shock tests Endurance tests Test rig control Scope of delivery: 1 × LDS Dactron LASER USB LAS 200 Shaker Control System USB license dongle Power cable Documentation as shown in the pictures Condition: Used Optical condition as shown in the pictures Calibration sticker present Important note: The license keys visible in the documents have been obscured for data protection and security reasons. The table shown in the photos, as well as any other items not explicitly mentioned, are not part of the sale. Shipping possible. Subject to changes, errors, and prior sale. We would be happy to answer any further questions by telephone.

Condition: good (used), Year of construction: 2006, operating hours: 20,000 h, Trumpf Haas HL 4006D YAG solid-state laser The Trumpf Haas HL 4006D is a 4000W Nd:YAG solid-state laser designed for industrial applications such as welding highly reflective materials, particularly for use with robots and a range of up to 100 meters via flexible fiber optics. Application areas: Welding: The main application is welding metal parts, especially highly reflective materials such as aluminum and copper, where other lasers are difficult to use. Automated manufacturing: The laser is designed for integration into automated production lines with industrial robots. Precision machining: The high power and precise beam quality enable precise work in industrial machining. Technical data: Manufacturer: Trumpf Haas Type: HL 4006D Rated laser power: 4000 W Beam quality: 25 mm.mrad Wavelength of laser light: 1064 nm Rated voltage: 400 V Rated power: 132 kW Rated power consumption: 140 kVA Year of manufacture: October 2006 Weight: 1500 kg Operating hours: approx. 20,000 Dimensions W x H x D: 3200 x 1700 x 1250 mm Laser optics incl. ILV scanner, pyrometer, and various spare parts Computer with WinLas software for controlling parameters You can find the matching cooling unit and robot in our shop: Rehsler TW HL4006D cooling unit Kuka KR 30/2 6-axis welding robot You can find more items – new and used – in our shop! International shipping costs available upon request! Isdpfxsxg Hpce Ag Aotn

Condition: good (used), FOBA DP 15 Laser Marking System The FOBA DP 15 laser marking system uses a fiber laser with a wavelength of 1064 nm and a lens focus of f=254 mm (254 mm focal length). This combination enables the permanent and sharp marking of materials such as metals and plastics using the "all-purpose laser." The 1064 nm wavelength is well absorbed by many materials, which can be used for annealing marking, color change, or material removal. Application: The fiber laser is a versatile "all-purpose laser" for marking industrial products. It is ideally suited for metals and a wide range of plastics. The technology enables permanent, easily readable, and precise marking. Mode of operation: The laser beam creates a focused light spot that penetrates the material. Ijdpfow U T Ebsx Ag Astn Depending on the material and settings, various effects can be achieved, including: Annealing marking: A color change of the material through heating. Color change: Creation of a color contrast on the material. Material removal: Removal of material to create a recess. Details: Device: FOBA DP 15 Laser Marking System Laser type: Fiber laser Wavelength: 1064 nm Focal length (f): 254 mm (equivalent to 10 inches) More new and used items can be found in our shop! International shipping costs available upon request!

Condition: excellent (used), Concept Laser X Line 2000R BC2 Dual Laser Manufacturer: Concept Laser GmbH / GE Additive / Colibrium Additive Type: X Line 2000R BC2 Year of manufacture: 2015 Machine type: Metal 3D printing system Process: LaserCUSING® / Powder bed process Laser system: Dual Laser Material processed: AlSi10Mg For sale is an industrial metal 3D printing system from Concept Laser. The system was designed for the additive manufacturing of metallic components using the powder bed process and is suitable for research, development, prototyping, and industrial series production. BC2 upgrade / modernization The system has been upgraded to the newer BC2 system standard. According to the available documentation, a comprehensive retrofit was carried out, involving the replacement of numerous assemblies and components. As a result, the machine has a significantly modernized equipment and system standard compared to earlier X Line 2000R models. Technical data Build volume (X x Y x Z): 800 x 400 x 500 mm Mains connection: 3P/N/PE AC 400 V ±10 % Frequency: 50 / 60 Hz Max. current consumption: 17 A per phase Compressed air supply: 7 - 8 bar Inert gas supply: 5 bar Cooling: water-cooled system Machine dimensions approx.: 5,300 x 2,700 x 2,760 mm (L x W x H) Weight approx.: 13,400 kg Equipment Dual laser system Powder handling system Material conveying system Filter units Process gas supply Control cabinet technology Operating and control system Work platform with access ladder Water-cooled laser system Existing peripherals as shown in the pictures Documented service work 06/2026 Service performed by Colibrium Additive / GE Additive VarioScan system including associated E-box replaced Functional test performed No error messages documented after completion of the work Operating data Laser 1 RET: approx. 26,808 h Laser 2 RET: approx. 38,419 h Note: The RET values describe the time during which the lasers were operational. They do not correspond to the actual exposure or production time. Application areas Additive manufacturing of metal components Aerospace industry Automotive industry Tool and mold making Research and development Prototype manufacturing Industrial series production Scope of delivery Concept Laser X Line 2000R BC2 main unit Powder handling components Filter technology Existing peripherals as shown in the pictures Further accessories according to the existing scope of delivery Condition Used Machine from industrial production Laser window clean and clear Isdpfozcn Efjx Ag Aotn Optical condition as shown in the pictures Inspection possible by appointment Availability: upon agreement. Scope of delivery as shown in the pictures. Subject to changes and errors in technical data as well as prior sale.