Used Epiroc Pipe Jacking Machine for sale (66,842)

Year of construction: 2023, condition: new, Machine equipped with complete formworks (rotating hade, 5 steel rings, outer formwork) for pipe with diameters: Dint=1000mm si Dint=800mm; - The equipment can manufacture unreinforced concrete pipes with connection sockets: Dint=1000mm; Dint=800mm; Dint=600mm; Dint=500mm; Dint=400mm; Dint=300mm; - Maximum height of pipe: 1000mm; minimum height of pipe: 250mm - Vertical translation of the rotating head – electric engine - Variable revolution of the rotating head (frequency converter) - Sizes: 2.0x2.0x4.2 meters Hedpfx Aieiy Dl Hezel - Mass≈2000 kilograms - Power: 16 kW (supply voltage: 380V) - Average productivity: 1 pipe / 6 minutes - Loading of the machine with concrete: manual; (optional – by conveyor belt) - Manipulating the formwork with the concrete pipe inside: with the forklift; - Recovery of the formwork: immediately. - Recovery of the ring: after 2-3 days, depending on the ambient temperature. - The frequency converter allows adjustment of speed according to the inside diameter of the pipe. - Changing the rotating head is simple and fast. - Rotating heads are lined with interchangeable wear resistant steel sheets. EQUIPMENT REQUIRED: - MX500L Concrete Mixer with aggregate loader: concrete preparation - Conveyor: transport of concrete from the mixer to the formwork. Steel rings for the lower plug - The production surface must be perfectly flat!

Condition: new, Year of construction: 2026, SPIRAL DUCT PRODUCTION MACHINE Metformer MTF 1602 TUBEFORMER Designed for the production of round SPIRO-type ducts. The produced duct complies with DIN EN 12237, BS, and Eurovent standards. Features: Coil decoiler with vertically adjustable brake Forming strips for duct production Burr-free high-speed cutting with circular cutting blades LCD touchscreen control Automatic lubrication system Automatic cutting during duct production Hjdpowa Skhsfx Aizsl Production reporting system (daily-weekly-monthly output) Automatic error detection Technical Data: Diameter range: 80–1600 mm Thickness range: Galvanized steel: 0.4–1.2 mm Stainless steel: 0.4–0.7 mm Aluminum: 0.4–1.3 mm Strip width: For 0.4–1.0 mm thickness: 137 mm For 1.1–1.3 mm thickness: 140 mm Production speed: 60 m/min Motor power: 11.25 kW Beading: Smooth, single or double Lock: External lock Cutting system: Circular cutting system Weight: 2900 kg Machine dimensions: 1900 × 2050 × 1500 mm Decoiler dimensions: 1780 × 1130 × 1250 mm Table dimensions: up to 2700 × 950 × 1200 mm Operating Environment: Power supply: 3-phase, 380V, 50Hz Clean surroundings Maximum ambient temperature: 40°C Minimum ambient temperature: -5°C Humidity: 55–85% Altitude:

Condition: new, Year of construction: 2025, functionality: fully functional, total width: 900 mm, total length: 2,020 mm, total height: 1,000 mm, sheet thickness steel (max.): 1 mm, Sheet thickness 0.35 - 1.2 mm, production dimensions 125 mm - 1250 mm, motor power 2x 1.5 kW, working speed 24/10 rpm, cold-worked steel and galvanized steel, production of elbows with diameter 200-1000 mm and straight pipes with diameter 200-1000 mm, guide rails and spare rollers included. Prices excluding VAT. Hedjymcvtspfx Aizsl

Year of construction: 2004, condition: used, functionality: limited functionality, Machine for automatic pressing of tube-plate evaporators. Hsdjyt Sqgspfx Aizel

Year of construction: 2004, condition: used, functionality: fully functional, Machine for cutting and 2D bending of aluminium tubes with a wall thickness of 7 and 8 mm. Hedeyt Sp Nopfx Aizol

Year of construction: 2008, condition: good (used), Manufacturer: WORTELBOER HOLLAND Type: PBM 24 Year of construction: 2008 Clamping area 215 - 620 mm Rotation area 170 - 620 mm Stroke 290 mm Max. wall thicknesses 1 cycle 40 mm Rotation speed 25, 38, 50 min TRB Roller conveyor 7000 mm with V Type Construction in height adjustable Specifications Metric US Standard There are no specifications for this machine (yet). Dimensions (estimate) length 3200 mm width Hedpfx Aerr Ungoizsl 2200 mm height 1700 mm weight 12000 kg Please note: The information on this page has been obtained from the manufacturer to the best of our knowledge and belief, and where possible, the information is given in good faith but accuracy cannot be guaranteed. Accordingly, it does not constitute a representation or contract and we recommend that you check all relevant details.

Condition: used, functionality: unexamined, Tube drawing machine with 2 stations. The machine has not been used for a while and is kept in storage. Hedpfx Aisyxpr Hezel

Condition: excellent (used), Advantages of the GF4: - Larger working range - Clamping jaws made of aluminum - Motor enables cutting of pipes made from very hard materials - 30% weight reduction due to new body design - Laser cutting position indicator - New ergonomic handle - Power cable with swivel and quick connector Hsdpfxeym Unzo Aizol The GF4 machine can be operated with the AVM automatic rotation module. Technical specifications: - Pipe outer diameter [mm]: 12 - 120 - Pipe wall thickness [mm]: 1 - 9 - Minimum pipe inner diameter (63 mm blade) [mm]: 21 - Minimum pipe inner diameter (68 mm blade) [mm]: 16 - Minimum pipe inner diameter (80 mm blade) [mm]: 4 - Built-in electronic speed controller: 65 - 215 rpm - Power: 1.8 kW without AVM / 1.9 kW with AVM, 200-240 V, 50/60 Hz - Protection class: II - Vibration level (EN 2662, part 1): 2.5 m/s² - Noise level: 79 dB (A) The GF series machines are orbital pipe and elbow cutting machines. The pipes to be cut are clamped in a self-centering, prismatic vice, which prevents deformation. Pipe diameter and tool speed can be easily set via intuitive controls, depending on the material type. The cutting device is guided manually around the pipe, while the electrically driven blade cuts or bevels the pipe edge. This is a planetary cutting method introduced by Georg Fischer. Orbital cutting is a time- and cost-saving process: - Perpendicular, flat, and burr-free cuts - Pipe ends prepared for various joining techniques without additional processing - Cold cutting - No overheating, preventing intergranular corrosion that could cause material cracking - Fast cutting - Saves time and money - Pipe edge beveling - Pipe ends can be beveled simultaneously during the cutting process or separately Optional parts: GF and RA machines can be supplied with either an automatic rotation module (AVM) or manual module (MVM). The AVM module continuously monitors cutting speed according to torque and set parameters. The MVM module, utilizing a gear and handle, enables effortless rotation of the machine head at a constant speed.

Year of construction: 2026, condition: new, functionality: fully functional, ZIM BT 1200 machine is designed to increase efficiency for production of manhole base, parcel base products etc. It’s production capacity is very high when you compare with the ordinary machines. It has uniqe specifications to increase production capacity, using life, products quality. Hjdpfx Aijibywlozjl The machine consistes of 3 different part. Pallet Stocking Robot, Vibration and Moulding Unit, Mortar Filling Cart. This machine can produce pipes 1200mm diameter and 1500mm height. This machine makes all the production full automatic and we use SIEMENS brand PLC microprocessors on it. There is mortar filling cart on machine. We use inner filling system for mortar filling cart and it makes equal and fast filling to moulds. There is a Pallet Stocking Robot system and it gives the pallets to the machine automatically. Production is done on production pallets, This production pallets should wait till the products dry and it takes around 24 hours if there is no curing system. The vibration system of machine is controlled by frequency driver controll system. It does not need any mechanic settings. It can easily adjusted from operator pannel. Special designed strong chassis of the machine enables long life production without errors. Produced materials can be carried to drying area with carriage carts or forklifts. The products can be carried to drying area with carriage carts or forklifts.

Condition: ready for operation (used), Year of construction: 2006, Speeds up to: 2250 rpm Feed rate: 0 - 300 mm/min Drive power per motor: 2.9 kW Electrical connection: 400 V Hjdpfx Aisyfgd Ejzol Weight: 395 kg Required space: 4100 x 1670 x 1450 mm

Condition: as good as new (ex-display), Year of construction: 2025, Max Ø 114mm; Straight and bent round tubes; One grinding station; Grinding of straight and bent round tubes up to Ø114mm with maximum flexibility. The ML100 tube grinding machine is the perfect choice for surface grinding and polishing of round, oval and elliptical tubes. The ML planetary belt system allows belt grinding without rotating the tube to deliver the best results. Hjdpfx Astzkgbeizjl The feed system safely feeds the straight tubes into the grinding station for a consistent and productive surface finish. ML100 Working capacity (Ø mm) 3 - 114 No. of stations 1 Sanding belt, dimensions (mm) (2x) 50x940 Sanding belt speed (m/s) 3-22 Feed speed (m/s) 1-5 Sanding belts Motor (kW) 3 Wheel, motor (kW) 1.5 Feed motor (kW) (2x) 0.12 Total power (kW) 5 Power consumption (A) 11 Dust extraction connection (Ø mm) 80 Dimensions (mm) 750x1000x1300 Weight (kg) 250

Condition: excellent (used), functionality: fully functional, Year of construction: 2016, machine/vehicle number: AR200 tube and profile roll, control type: NC control, degree of automation: semi-automatic, actuation type: hydraulic, controller manufacturer: Delsy, controller model: MG Touch Pro 15", pipe diameter (max.): 273 mm, tube wall thickness (max.): 20 mm, bending angle (max.): 200 °, number of axes: 9, working height: 2,200 mm, overall weight: 27,000 kg, total length: 2,850 mm, total width: 2,950 mm, total height: 2,930 mm, power: 29.42 kW (40.00 HP), input voltage: 400 V, input frequency: 50 Hz, type of input current: three-phase, operating pressure: 240 bar, number of digital displays: 6, Equipment: documentation/manual, emergency stop, Profile bending machine model AR200 brand MG srl year 2016 Capacity chart of the machine in enclosed. Model AR200 Pipe bending roll NR. 2 set of rollers for pipe bending SIZE 159MM - SIZE 139,7 MM Configuration -pyramid dual pinch side rolls independent hydraulic -3 rolls driven hydraulic with gear unit each shaft -side arms left/right side hydraulic move in 3 direction keeping aligned the profile being formed. -Control panel console NC programmable with automatic rolling, touch screen 15” , display the 9 axis of the machine with readout for manual use and fully programmable automatic forming -Electric power supply 3phase 400/50 Vac -40HP Hjdpfx Aoyx A Uusizol -Service manuals and operation books original. Additional set of rollers and tooling available for bending section HEB - IPE -UNP - ANGLE – T -SECTION- TUBULAR- IRON BAR ON EDGE - see capacity chart in enclosed ..

Condition: ready for operation (used), Pipe Bender, Tube Bending Machine, Profile Bending Machine, SHS/RHS Bender, Used Machine Hodpowhmv Usfx Aizjl Manufacturer: Schwarze-Wirtz Model: Perfect H135 Dimensions: 6115 x 2870 x 1300 mm Bending Capacity: Round tube: Ø 130 mm, bending radius: 500 mm Square tube: 30 mm, radius: 380 mm 45 mm, radius: 500 mm 50 mm, radius: 500 mm 70 mm, radius: 500 mm 90 mm, radius: 500 mm Bending Angle: up to 180° Electrical Specifications: 380 V

Condition: used, Year of construction: 1995, tube diameter 45 mm wall strength 2 mm bending radius min. . mm weight of the machine ca. 1,7 t dimensions of the machine ca. 5x0,85x1,5 m sn 1765 Pipe length up to 4100 The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale; Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. Hedpfsyutr Usx Aizol We look forward to your visit. Your Markus Hirsch Team

Condition: good (used), Pipe cutting machine, pipe cutting saw, pipe cutter -Pipe size: 22-108 mm pipes of the pressfitting systems made of stainless steel, carbon steel, copper -Equipment: Foot switch, steel rollers, stainless steel rollers, cutting wheel, steady rest, workbench, vice -Operating voltage: 220 volts -Dimensions: 1200/870/H1170 mm Transport dimensions: 1200/870/H460 mm -Weight: 61 kg Hsdpfsv Tz N Ijx Aizol

Condition: new, L-beam 50x5 mm Hsdpoyvvnisfx Aizol square material 50x40x3 mm I - beam section - flat steel 120x15 mm I-beam section - upend 60x10 mm round material Ø 35 mm tube diameter Ø 70x2 mm roll diameter 155 mm Shaft diameter 50 mm bending speed 4,3 m/min total power requirement 1,5 kW weight 400 kg dimensions 830x730x1350 mm Domestic equipments: - Extended special steel shafts - a set of hardened rollers - Bottom rollers are driven - lateral straightening rollers - Foot pedal - horizontal and vertical working - CE mark / Declaration of Conformity - Operating instructions in German

Condition: excellent (used), For sale: Professional tube deburring machine TUBOGRAT, manufactured by the German company Tracto Technik Spezialmaschinen. The device is designed for processing tube ends and removing internal and external burrs. Ideal for workshops, production, and installation purposes. Robust construction ensures long and trouble-free operation. Technical data Manufacturer: Tracto Technik Spezialmaschinen KG Model: TUBOGRAT TG 138 Diameter range: 6 to 42 mm Rotational speed: 180 rpm Direction of rotation: left Power supply: 380 V Hodpfxoyvgp Tj Aizjl Phases: 3 Frequency: 50 Hz Power: 0.12 kW Current: 0.4 A Condition Device in good technical condition Visible signs of use Machine is operational

Condition: new, 95 mm Shaft diameter 30 mm Shaft revolutions 7 U/min roll diameter 132 mm Drive 0,75 kW weight 220 kg range L-W-H 530x900x660 mm Equipment / Accessories: - Two driven rollers with grooved surface - Manual feed of the upper roller Hodpfeyv N A Hox Aizjl - working position horizontal and vertical (with tilting base) - Bearings with tapered roller bearings - Use of replaceable slide rails on the guide carriage - The standard roller set is included. He can turn different profiles are used e.g. Flat iron, T-iron, solid material etc.

Condition: new, I-beam section - flat steel 80x20 (d1200) mm I-beam section - upend 80x25 (d2100) mm L-beam 50x50x6 (d1000) mm bar material - diameter 40 (d800) mm square material 60x60x3 (d4000) mm rectangle 80x30x3 (d6000) mm tube diameter max. 70x2 (d1600) mm Hsdsyv Nwqspfx Aizsl tool adaptor 60 mm roll diameter 177 mm bending speed 6,4 m/min total power requirement 4 kW machine weight ab. 970 kg Overall size 1400x950x1450 mm Domestic equipments: - hydr. roller drive - Planetary gearbox delivery of the 2 lower rollers - for extra small bending radii - hardened tool holder (42CrMo4) - Standard roller set, hardened - lateral straightening rollers - mobile control panel - 3 driven rollers - Digital display - Machine horizontal u. vertically usable - CE mark / Declaration of Conformity - Operating instructions in German

Condition: new, I-beam section - upend 100 x 20 (d 2100) mm tube diameter max. 100 x 3 (d 3000) mm L-beam 80 x 80 x 8 (d 2000) mm square material 50 x 25 x 2 (d 600) mm bar material - diameter 60,0 (d 1000) mm I-beam section - flat steel 120 x 30 (d 600) max. 140 mm tool taper 80,0 turning speeds 4,2 U/min weight 1600 kg dimensions 1240 x 1375 x 1540 mm Domestic equipments: - Welded steel structure (St-52) - Rollers are driven by 3 separate hydraulic motors - Stepless speed - Special steel gears - Shafts are made of special steel, hardened and ground - Manual lubrication - Guide rollers are hydraulically adjustable - Lower rollers are hydraulically movable up and down - Infinitely adjustable speed of the lower rollers, move after below and above - Digital display for lower rollers - Separate and movable control panel - Horizontal and vertical operation - Production quality certified according to CE, ISO 9001 - 2015, TSEK and TURQUM Additional equipment: - hydraulically adjustable straightening rollers Hsdpfxsyv Nnis Aizjl

Condition: new, round material 40 mm tube diameter 70x2 mm square material 80x30x3 mm L-beam 50 x 5 mm roll diameter 157 mm I-beam section - upend 50 x 15 mm I - beam section - flat steel 80 x 16 mm Shaft diameter 50 mm bending speed 2,95 m/min total power requirement 1,1 kW weight of the machine ca. 500 kg dimensions of the machine ca. 1000x950x1450 mm Domestic equipments: - Special steel shafts (42CrMo4) hardened and ground - a set of standard rollers - lower rollers up and down hydraulically deliverable Hedpfx Aisyv Nk Rszel - digital display for lower rollers - separate control panel - in one direction manually adjustable lateral straightening rollers - manual lubrication - horizontal and vertical operation - CE mark / Declaration of Conformity - Operating instructions in German

Condition: new, R10-R260 210 ° bending speed 2 U/min 1 1/4" x 3,5 mm einphasig - 230 V Hjdpoyv I Tkefx Aizel drive motor 1,1 kW < 70 dB weight of the machine ca. 80 kg dimensions of the machine ca. 410 x 1000 x 570 mm Accessories / equipment: Hard copper and aluminum: 54x2 mm Steel tube: 42x3 mm Stainless steel: 42x2.5 mm Solid material: 30 mm Number of programs: 30 each 9 bends Control: Soft-touch control panel in 8 different languages Mobile by driving device The controller allows easy programming of the automatic cycle The controller is equipped with a system diagnostics and has a great language selection. Patented fast tool change system A single bending speed

Condition: ready for operation (used), A CNC tube welding system Weil Technology for longitudinal seam welding is available. Tube diameter range: 76mm-600mm, Tube length range: 250mm-1550mm, Material thickness range: 0.8mm-2mm, Welding process: Laser, Max. welding output: approx. 80pieces/h. Documentation available. An on-site inspection is possible. Hsdpfx Asyttwnsizol

Condition: used, For sale: Professional pipe beveling/chamfering machine by FEIN with GF (Georg Fischer) RA4 head, mounted on a solid workshop stand for pipe processing. This device is used for beveling pipe ends prior to welding—preparing a V-type weld edge. Hedpfsyt Ifgox Aizel Industrial equipment used in pipeline workshops, industrial installations, and when constructing process plant systems. The machine is of very robust construction, made in Germany. Comfortable operation thanks to a stable stand. Technical data • Drive manufacturer: FEIN – Made in Germany • Model: 680 CB1641 • Power: 1600 W • Voltage: 200–240 V • Frequency: 50–60 Hz • Current: 8.8 A • Speed: 150–270 rpm Head • Manufacturer: Georg Fischer (GF) • Type: RA4 Applications • Pipe beveling • Pipe preparation for welding • Pipeline work • Welding workshops • Industrial installations Visual and technical condition as shown in the photos. Solid industrial-grade machine.

Condition: excellent (used), functionality: fully functional, Year of construction: 2019, Max. bending diameter: Ø 76 mm Max. pipe wall thickness: 3.0 mm Max. bending length: 6000 mm Min. bending angle: 0.1° Max. bending angle: 190° Max. bending radius: 260 mm Operating speed Rotation speed: 200°/second Bending speed: 30°/second Feed speed: max. 1000 mm/second Tolerances: Rotation (°): ±0.1° Bending (°): ±0.1° Feed (°): ±0.1° Hydraulic system: Hydraulic motor power: 7.5 kW Max. hydraulic pressure: 180 bar Hydraulic oil: 120 liters Rated power: 44 kW Voltage: 400 V AC Dimensions L x W x H: 8900 x 1200 x 1850 mm Weight: 4850 kg Description: Materials: Steel | Stainless steel | Aluminum | Brass | Copper and other flexible materials for simple to complex shapes Display: Portable 15-inch color touchscreen monitor Control panel: Servo and hydraulic motion control, plus selectable servo axis speed Foot pedal User-friendly AKYAPAK control software Hydraulic system: Bosch, Parker Operating modes: Manual, semi-automatic, and fully automatic Programming: Y-B-C or X-Y-Z mode Cooling system: Hydraulic oil cooler Pipe clamp: Hydraulic Hedpfxoyr N Ere Aizol Industrial PC: Pentium processor, 256 MB RAM, hard drive, and floppy disk drive Lubrication system: Automatic Control: PLC-based Rotary axis: Servo-controlled Bending system: Hydraulic Auxiliary axes: Hydraulic Forward and reverse movement: Manual Pipe length calculation: Automatic, according to program Workpiece display: 3D 360° graphic display