Used Ercolina Profile Roller for sale (17,304)

Condition: used, Light roller conveyor, total width 540 mm, 45-degree curve, with 75 mm plastic rollers · For transporting individual items using gravity (incline). Incline approximately 2-5%, depending on the nature and weight of the conveyed goods. · The conveyed goods must have a smooth and stable base. · The minimum width of the conveyed goods must not be less than 200 mm. · The conveyed goods should rest on at least 3 roller axles. · This determines the required spacing = axle distance. Iodsz Uzdpepfx Ag Aetn · Frame: U-profile 20/70/20 mm, galvanized (aluminum frame available upon request). · Rollers: - ball-bearing-mounted and galvanized steel rollers, Ø 48 mm, or - ball-bearing-mounted plastic rollers, Ø 48 mm - plastic rollers with stainless steel balls available upon request. · Curves: Inner radius 800 mm (other radii available). · ¹Note: with a spacing of 75 mm, the delivered length is 975 mm instead of 1000 mm, and 1950 mm instead of 2000 mm. · Additional available axle distances: 50 mm, 125 mm, 150 mm, and 200 mm. · Other technical specifications: Size: 45° curve. · Total width: 540 mm. · Design: with plastic rollers.

Condition: used, Light roller conveyor, total width 340 mm, straight 2 m with steel rollers, galvanized 100 mm · For transporting individual items by gravity (downhill). Inclination approx. 2 - 5%, depending on the nature and weight of the conveyed goods. · The conveyed goods must have a smooth and stable base. · The smallest width of the conveyed goods must not be less than 200 mm. · The conveyed goods should rest on at least 3 roller axles. · This results in the required spacing = axle distance. Itsdpfx Agez U Dbws Aon · Frame: U-profile 20/70/20 mm, galvanized (aluminum frame available on request). · Rollers: ball-bearing, galvanized steel rollers Ø 48 mm, or ball-bearing plastic rollers, ball-bearing plastic rollers with stainless steel balls available on request. · Curves: inner radius 800 mm (other radii available). · ¹Note: with a spacing of 75 mm, the length will be 975 mm instead of 1000 mm, and 1950 mm instead of 2000 mm. · Additional axle distances available: 50 mm, 125 mm, 150 mm, and 200 mm. · Further technical characteristics: Size: straight 2 m. · Total width: 340 mm. · Design: with steel rollers, galvanized.

Condition: used, All-round roller conveyors, type AC 149, total length 440 mm, straight length 1,075 mm * For right-angled transverse transport at distribution, turning, or diverting points of roller and all-round roller conveyors * The conveyed goods must have a stable and smooth base and should always rest on at least 3 roller axles Itsdpfjz U Dwxex Ag Ajn * All-round roller conveyors are adapted in terms of design to roller and all-round roller conveyors and can therefore be easily integrated * Design: U-profile frame 20/70/20 mm, galvanized. All-round rollers, Ø 48 mm, made of plastic, gray, with slide bearings, rollers arranged offset from axis to axis. Note: The conveyed goods must have a dimensionally stable, flat, closed, and clean base. * Passage can be folded up for roller and all-round roller conveyors. The standard length of the passage is 1 m. The price is determined by the price for the corresponding conveyor element (1 m) plus the additional price for the passage (folding mechanism). * Other technical features: Size: Straight, 1 m * Total width: 440 mm

Condition: used, Ball table, type AD 115, rail version, 500 mm wide, straight, 0.5 m length, 75 mm pitch · For installation between roller and ball track systems at distribution, turning or sorting points, as well as for use as independent work tables. · When used in conjunction with roller and ball track systems, the side profiles are adapted to the respective system. · Ball tables are manufactured in any desired size and ball pitch, as well as for heavy loads; therefore, please always specify the required load capacity. · Supports: for heavy tables or special sizes, available upon request. · For use in conjunction with lightweight roller conveyors, see table. · Design: Tabletop made of 4 mm thick steel sheet, additionally reinforced with bracing. Ball rollers, diameter 15 mm, housing galvanized, load capacity of individual ball roller 50 kg; ball rollers, diameter 22 mm, available upon request. · Coating: blue, RAL 5015. Note: The conveyed material must have a dimensionally stable, flat, closed and clean bottom surface. Itedpfxs Aaddno Ag Ajn · Other technical characteristics: Overall width: 540 mm.

Condition: used, All-sided roller conveyor, type AC 149, total width 540 mm, straight, 1 m 75 mm · For right-angled transverse transport to distribution, turning, or diverting points of roller and roller conveyor systems · The conveyed goods must have a stable and smooth base and should always rest on at least 3 roller axles · All-sided roller conveyors are adapted to the design of roller and roller conveyor systems and can therefore be easily integrated · Design: U-profile frame 20/70/20 mm, galvanized. All-sided rollers, Ø 48 mm, made of plastic, grey, with plain bearings, rollers arranged offset from axle to axle. Note: The conveyed goods must have a dimensionally stable, flat, closed, and clean base. · Passage can be folded up for roller and roller conveyor systems. The standard length of the passage is 1 m. The price is calculated from the price of the corresponding conveyor element, 1 m, plus the additional price for the passage (folding mechanism). · Further technical features: Size: straight, 1 m · Total width: 540 mm Itedpfx Aj Aah H Hjg Ajn

Condition: used, Light roller conveyors, total width 540 mm, straight 3 m, with plastic rollers 75 mm · For transporting individual items by gravity (incline). Incline approximately 2-5%, depending on the nature and weight of the conveyed goods. · The conveyed goods must have a smooth and stable base. · The smallest width of the conveyed goods must not be less than 200 mm. · The conveyed goods should rest on at least 3 roller axles. · This results in the required spacing = axle distance. · Frame: U-profile 20/70/20 mm, galvanized (aluminum frame available upon request). · Rollers: - ball-bearing mounted and galvanized steel rollers, Ø 48 mm, or - ball-bearing mounted plastic rollers, Ø 48 mm - plastic rollers with stainless steel balls available upon request. · Curves: inner radius 800 mm (other radii available). · ¹Note: with a spacing of 75 mm, the delivered length will be 975 mm instead of 1000 mm, and 1950 mm instead of 2000 mm. · Additional available axle distances: 50 mm, 125 mm, 150 mm, and 200 mm. · Other technical specifications: size: straight 3 m. · Total width: 540 mm. · Design: with plastic rollers. Iedps Aaf Etofx Ag Aetn

Condition: used, Light roller conveyor, total width 640 mm, 45-degree curve with 75 mm plastic rollers · For transporting individual items by gravity (incline) with a slope of approximately 2-5%, depending on the nature and weight of the conveyed material · The conveyed material must have a smooth and stable base · The smallest width of the conveyed material must not be less than 200 mm · The conveyed material should rest on at least 3 roller axles · This results in the required spacing = axle distance · Frame: U-profile 20/70/20 mm, galvanized (aluminum frame available upon request) · Rollers: - ball-bearing mounted and galvanized steel rollers, Ø 48 mm, or - ball-bearing mounted plastic rollers, Ø 48 mm - plastic rollers with stainless steel balls available upon request · Curves: inner radius 800 mm (other radii available) · ¹Note: with a spacing of 75 mm, the delivered length will be 975 mm instead of 1000 mm, and 1950 mm instead of 2000 mm · Additional available axle distances: 50 mm, 125 mm, 150 mm and 200 mm Ijdpfx Agez U E Ure Aetn · Other technical specifications: size: 45° curve · Total width: 640 mm · Design: with plastic rollers

Condition: used, Light roller conveyors, total width 640 mm, straight 3 m with plastic rollers, 100 mm * For transporting individual items by gravity (incline). Slope approximately 2-5%, depending on the nature and weight of the conveyed goods. * The conveyed goods must have a smooth and stable base. Ijdpfxez U Hr Ss Ag Aotn * The smallest width of the conveyed goods must not be less than 200 mm. * The conveyed goods should rest on at least 3 roller axles. * This results in the required spacing = axle distance. * Frame: U-profile 20/70/20 mm, galvanized (aluminum frame available upon request). * Rollers: – ball-bearing mounted and galvanized steel rollers, Ø 48 mm, or – ball-bearing mounted plastic rollers, Ø 48 mm – plastic rollers with stainless steel balls available upon request. * Curves: inner radius 800 mm (different radii available). * ¹Note: with a spacing of 75 mm, the length will be 975 mm instead of 1000 mm, and 1950 mm instead of 2000 mm. * Additional available axle distances: 50 mm, 125 mm, 150 mm, and 200 mm. * Other technical specifications: Size: Straight 3 m. * Total width: 640 mm. * Design: with plastic rollers.

Condition: used, Light roller conveyor, overall width 640 mm, straight, 1 m long, with plastic rollers, 75 mm · For transporting individual items by gravity (incline). Incline approximately 2-5%, depending on the nature and weight of the conveyed goods. · The conveyed goods must have a smooth and stable base. · The smallest width of the conveyed goods must not be less than 200 mm. · The conveyed goods should rest on at least 3 roller axles. · This determines the required spacing = axle distance. · Frame: U-profile 20/70/20 mm, galvanized (aluminum frame available on request). · Rollers: - ball-bearing mounted and galvanized steel rollers, Ø 48 mm, or - ball-bearing mounted plastic rollers, Ø 48 mm - plastic rollers with stainless steel balls available on request. · Curves: inner radius 800 mm (other radii available). · ¹Note: with a spacing of 75 mm, instead of a length of 1000 mm, a length of 975 mm will be supplied; instead of a length of 2000 mm, a length of 1950 mm will be supplied. Itodpfx Age Aafx Tj Aon · Additional available axle distances: 50 mm, 125 mm, 150 mm, and 200 mm. · Other technical specifications: size: straight, 1 m. · Overall width: 640 mm. · Design: with plastic rollers.

Condition: used, Light roller conveyor, overall width 340 mm, straight, 2 m long, with plastic rollers, 75 mm. * For transporting individual items by gravity (incline). Incline angle approximately 2-5%, depending on the nature and weight of the conveyed goods. * The conveyed goods must have a smooth and stable base. * The smallest width of the conveyed goods must not be less than 200 mm. * The conveyed goods should rest on at least 3 roller axles. * This results in the required spacing = axle distance. * Frame: U-profile 20/70/20 mm, galvanized (aluminum frame available upon request). * Rollers: - ball-bearing mounted and galvanized steel rollers, Ø 48 mm, or - ball-bearing mounted plastic rollers, Ø 48 mm - plastic rollers with stainless steel balls available upon request. * Curves: internal radius 800 mm (different radii available). * ¹Note: with a spacing of 75 mm, the length delivered is 975 mm instead of 1000 mm, and 1950 mm instead of 2000 mm. * Additional available axle distances: 50 mm, 125 mm, 150 mm and 200 mm. * Other technical features: Size: straight, 2 m. * Overall width: 340 mm. Iedpfx Aoz U Nu Njg Aetn * Design: with plastic rollers.

Condition: used, Ball table, type AD 115, track width 300 mm, straight, 0.5 m, pitch 75 mm · For installation between roller and ball track systems at distribution, turning, or sorting points, as well as for use as independent work tables. · When used in conjunction with roller and ball track systems, the side profiles are adapted to the respective system. · Ball tables are manufactured in any desired size and ball pitch, as well as for heavy loads; therefore, please always specify the required load-bearing capacity. · Supports: for heavy tables or special sizes, available upon request. · For use with light roller tracks, see table. · Design: Tabletop made of 4 mm thick steel sheet, additionally supported by bracing. Ball rollers Ø 15 mm, housing galvanized, load-bearing capacity of a single ball roller 50 kg, ball rollers Ø 22 mm available upon request. · Coating: blue, RAL 5015. Note: The conveyed goods must have a dimensionally stable, flat, closed, and clean base. Itedpfoz U Nluox Ag Aon · Other technical specifications: Overall width: 340 mm.

Condition: used, Light roller conveyor, total width 440 mm, straight, 3 m, with plastic rollers, 100 mm. · For transporting individual items by gravity (incline). Incline approx. 2-5 %, depending on the nature and weight of the conveyed material. · The conveyed material must have a smooth and stable base. · The smallest width of the conveyed material must not be less than 200 mm. · The conveyed material should rest on at least 3 roller axles. · This determines the required pitch = axle spacing. · Frame: U-profile 20/70/20 mm, galvanized (aluminum frame available on request). · Rollers: - ball-bearing mounted and galvanized steel rollers, Ø 48 mm, or - ball-bearing mounted plastic rollers, Ø 48 mm - plastic rollers with stainless steel balls available on request. Ijdpfxs Aahp Uj Ag Ajtn · Curves: inner radius 800 mm (different radii available). · ¹Note: with a pitch of 75 mm, the delivered length will be 975 mm instead of 1000 mm, and 1950 mm instead of 2000 mm. · Additional axle spacings available: 50 mm, 125 mm, 150 mm, and 200 mm. · Other technical specifications: size: straight, 3 m. · Total width: 440 mm. · Design: with plastic rollers.

Condition: used, Light roller conveyor, overall width 340 mm, 90-degree curve with plastic rollers, 75 mm · For transporting individual items by gravity (incline), with a slope of approximately 2-5%, depending on the nature and weight of the conveyed material · The conveyed material must have a smooth and stable base Ijdpfxoz U U Hqo Ag Astn · The smallest width of the conveyed material must not be less than 200 mm · The conveyed material should rest on at least 3 roller axles · This determines the required pitch = axle spacing · Frame: U-profile 20/70/20 mm, galvanized (aluminum frame available upon request) · Rollers: - ball-bearing mounted and galvanized steel rollers, Ø 48 mm, or - ball-bearing mounted plastic rollers, Ø 48 mm - plastic rollers with stainless steel balls available upon request · Curves: inner radius 800 mm (other radii available) · ¹Note: with a pitch of 75 mm, the length will be 975 mm instead of 1000 mm, and 1950 mm instead of 2000 mm · Additional available axle spacings: 50 mm, 125 mm, 150 mm and 200 mm · Other technical characteristics: size: 90° curve · Overall width: 340 mm · Design: with plastic rollers

Condition: used, Ball table, type AD 115, rail type, B. 600 mm, straight, 1 m, spacing 100 mm * For installation between roller and small roller conveyors at distribution, turning, or sorting points, as well as for use as independent work tables. Itodpfs Aakaiex Ag Aen * When used in conjunction with roller and small roller conveyors, the side profiles are adapted to the respective system. * Ball tables are manufactured in any desired size and ball spacing, and for heavy loads; therefore, please always specify the required load capacity. * Supports: for heavy tables or special sizes, available upon request. * In conjunction with light roller conveyors, see table. * Design: Tabletop made of 4 mm thick steel sheet, additionally reinforced with bracing. Ball rollers Ø 15 mm, housing galvanized, load capacity of a single ball roller 50 kg, ball rollers Ø 22 mm available upon request. * Coating: blue, RAL 5015. Note: The conveyed goods must have a dimensionally stable, flat, closed, and clean bottom. * Other technical features: overall width: 640 mm.

Condition: used, Ball table, type AD 115, rail-mounted, B. 500 mm, straight, 0.5 m, pitch 100 mm Isdpfo Aaki Dox Ag Ajtn · For installation between roller and small roller conveyors at distribution, turning, or sorting points, as well as for use as independent work tables. · When used in conjunction with roller and small roller conveyors, the side profiles are adapted to the respective system. · Ball tables are manufactured in any desired size and with any desired ball spacing, as well as for heavy loads; therefore, please always specify the required load-bearing capacity. · Supports: for heavy tables or special sizes, available upon request. · In conjunction with light roller conveyors, see table. · Design: Tabletop made of 4 mm thick steel sheet, additionally reinforced with struts. Ball rollers Ø 15 mm, housing galvanized, load-bearing capacity of the individual ball roller 50 kg, ball rollers Ø 22 mm available upon request. · Paint finish: blue, RAL 5015. Note: The conveyed goods must have a dimensionally stable, flat, closed, and clean base. · Other technical specifications: Overall width: 540 mm.

Condition: used, Light roller conveyor, total width 540 mm, 90-degree curve with steel rollers, galvanized, 75 mm. * For transporting individual items by gravity (incline). Inclination approx. 2 - 5 %, depending on the nature and weight of the conveyed goods. Ijdpfx Ago Aaicpe Aotn * The conveyed goods must have a smooth and stable base. * The smallest width of the conveyed goods must not be less than 200 mm. * The conveyed goods should rest on at least 3 roller axles. * This determines the required spacing = axle distance. * Frame: U-profile 20/70/20 mm, galvanized (aluminum frame available on request). * Rollers: ball-bearing mounted, galvanized steel rollers, Ø 48 mm, or ball-bearing mounted plastic rollers, ball-bearing mounted plastic rollers with stainless steel balls available on request. * Curves: inner radius 800 mm (different radii available). * ¹Note: with a spacing of 75 mm, the delivered length is 975 mm instead of 1000 mm, and 1950 mm instead of 2000 mm. * Additional axle distances available: 50 mm, 125 mm, 150 mm, and 200 mm. * Other technical specifications: size: 90° curve. * Total width: 540 mm. * Design: with steel rollers, galvanized.

Condition: used, Light roller conveyors, overall width 340 mm, 45-degree curve, with 75 mm plastic rollers · For transporting individual items by gravity (inclination). Inclination approx. 2-5%, depending on the nature and weight of the conveyed material. · The conveyed material must have a smooth and stable base. · The smallest width of the conveyed material must not be less than 200 mm. · The conveyed material should rest on at least 3 roller axles. · This results in the required pitch = axle spacing. · Frame: U-profile 20/70/20 mm, galvanized (aluminum frame available on request). · Rollers: - ball-bearing and galvanized steel rollers, Ø 48 mm, or - ball-bearing plastic rollers, Ø 48 mm - plastic rollers with stainless steel balls available on request. · Curves: Inner radius 800 mm (other radii available). Itedpfe Aacgbjx Ag Aen · ¹Note: with a pitch of 75 mm, the delivered length will be 975 mm instead of 1000 mm, and 1950 mm instead of 2000 mm. · Additional axle spacings available: 50 mm, 125 mm, 150 mm, and 200 mm. · Other technical features: Size: 45° curve. · Overall width: 340 mm. · Design: with plastic rollers.

Condition: used, Light roller conveyors, total width 340 mm, 90-degree curve with steel rollers, galvanized, 75 mm · For transporting individual items by gravity (incline). Incline approx. 2-5%, depending on the characteristics and weight of the conveyed goods. · The conveyed goods must have a smooth and stable base. · The minimum width of the conveyed goods must not be less than 200 mm. · The conveyed goods should rest on at least 3 roller axles. Iedpfx Ags Aamg Ss Aotn · This results in the required pitch = axle spacing. · Frame: U-profile 20/70/20 mm, galvanized (aluminum frame available on request). · Rollers: ball-bearing, galvanized steel rollers, Ø 48 mm, or ball-bearing plastic rollers, ball-bearing plastic rollers with stainless steel balls available on request. · Curves: inner radius 800 mm (different radii available). · ¹Note: with a pitch of 75 mm, the lengths supplied are as follows: instead of 1000 mm - length 975, instead of 2000 mm - length 1950. · Additional available axle spacings: 50 mm, 125 mm, 150 mm and 200 mm. · Other technical characteristics: size: 90° curve. · Total width: 340 mm. · Design: with steel rollers, galvanized.

Condition: used, Light roller conveyor, overall width 340 mm, straight, 1 m, with plastic rollers, 100 mm · For transporting individual items using gravity (incline), with an incline of approximately 2-5%, depending on the nature and weight of the conveyed material. · The conveyed material must have a smooth and stable base. · The smallest width of the conveyed material must not be less than 200 mm. · The conveyed material should rest on at least 3 roller axles. · This determines the required spacing = axle distance. · Frame: U-profile 20/70/20 mm, galvanized (aluminum frame available upon request). Itodpfx Agjz U Amrs Aen · Rollers: - ball-bearing mounted and galvanized steel rollers, Ø 48 mm, or - ball-bearing mounted plastic rollers, Ø 48 mm - plastic rollers with stainless steel balls available upon request. · Curves: inner radius 800 mm (other radii available). · ¹Note: with a spacing of 75 mm, the delivered length will be 975 mm instead of 1000 mm, and 1950 mm instead of 2000 mm. · Additional available axle distances: 50 mm, 125 mm, 150 mm, and 200 mm. · Other technical specifications: size: straight, 1 m. · Overall width: 340 mm. · Design: with plastic rollers.

Condition: used, Light roller conveyors, total width 640 mm, straight, 2 m, with steel rollers, galvanized, 100 mm. · For transporting individual items by gravity (downhill). Inclination approx. 2 - 5%, depending on the nature and weight of the conveyed material. · The conveyed material must have a smooth and stable base. Iedpfez Uv T Sox Ag Ajtn · The minimum width of the conveyed material must not be less than 200 mm. · The conveyed material should rest on at least 3 roller axles. · This results in the required spacing = axle distance. · Frame: U-profile 20/70/20 mm, galvanized (aluminum frame available on request). · Rollers: ball-bearing mounted, galvanized steel rollers, Ø 48 mm, or ball-bearing mounted plastic rollers; ball-bearing mounted plastic rollers with stainless steel balls available on request. · Curves: inner radius 800 mm (other radii available). · ¹Note: with a spacing of 75 mm, the length will be 975 mm instead of 1000 mm, and 1950 mm instead of 2000 mm. · Additional axle distances available: 50 mm, 125 mm, 150 mm, and 200 mm. · Other technical specifications: size: straight, 2 m. · Total width: 640 mm. · Design: with steel rollers, galvanized.

Condition: used, Light roller conveyors, overall width 440 mm, straight, 2 m long, with plastic rollers, 100 mm. · For transporting individual items by gravity (incline). Inclination approx. 2-5%, depending on the nature and weight of the conveyed goods. · The conveyed goods must have a smooth and stable base. · The smallest width of the conveyed goods must not be less than 200 mm. · The conveyed goods should rest on at least 3 roller axles. · This results in the required spacing = axle distance. · Frame: U-profile 20/70/20 mm, galvanized (aluminum frame available on request). · Rollers: - ball-bearing mounted and galvanized steel rollers, Ø 48 mm, or - ball-bearing mounted plastic rollers, Ø 48 mm - plastic rollers with stainless steel balls available on request. · Curves: Inner radius 800 mm (different radii available). · ¹Note: with a spacing of 75 mm, the delivered length will be 975 mm instead of 1000 mm, and 1950 mm instead of 2000 mm. · Additional axle distances available: 50 mm, 125 mm, 150 mm and 200 mm. · Other technical features: Size: Straight, 2 m. Itedpfx Ago Aaimuo Aen · Overall width: 440 mm. · Design: with plastic rollers.

Condition: used, All-directional roller conveyors, Type AC 149, total length 540 mm, straight, 0.5 m, 75 mm · For right-angled lateral transport at distribution, turning, or sorting points of roller and roller conveyor systems. · The conveyed goods must have a stable and smooth base and should always rest on at least 3 roller axles. Ijdpfx As Aabtmeg Ajtn · All-directional roller conveyors are designed to match the roller and roller conveyor systems and can therefore be easily integrated. · Design: U-profile frame 20/70/20 mm, galvanized. All-directional rollers, Ø 48 mm, made of plastic, gray, with sliding bearing, rollers arranged offset from one axle to the next. Note: The conveyed goods must have a dimensionally stable, flat, closed, and clean base. · Lift-up section for roller and roller conveyor systems. The standard length of the lift-up section is 1 m. The price is calculated based on the price of the corresponding conveyor element 1 m plus the additional cost for the lift-up section (folding mechanism). · Other technical characteristics: Size: Straight, 0.5 m · Total width: 540 mm

Condition: used, Light roller conveyor, total width 640 mm, straight 3 m, with plastic rollers 75 mm * For transporting individual items by gravity (incline). Inclination approx. 2-5%, depending on the nature and weight of the conveyed goods. * The conveyed goods must have a smooth and stable base. * The smallest width of the conveyed goods must not be less than 200 mm. * The conveyed goods should rest on at least 3 roller axles. * This results in the required pitch = axle spacing. * Frame: U-profile 20/70/20 mm, galvanized (aluminum frame available on request). * Rollers: - ball-bearing mounted and galvanized steel rollers, Ø 48 mm, or - ball-bearing mounted plastic rollers, Ø 48 mm - plastic rollers with stainless steel balls available on request. Itodpfx Age Aai Rts Asn * Curves: inner radius 800 mm (different radii available). * ¹Note: with a pitch of 75 mm, the delivered length will be 975 mm instead of 1000 mm, and 1950 mm instead of 2000 mm. * Additional available axle spacings: 50 mm, 125 mm, 150 mm, and 200 mm. * Other technical specifications: size: straight 3 m * Total width: 640 mm * Design: with plastic rollers

Condition: used, Light roller conveyors, overall width 440 mm, straight, 1 m long, with steel rollers, galvanized, 100 mm · For transporting individual items by gravity (incline) at an angle of approximately 2-5%, depending on the nature and weight of the conveyed goods. · The conveyed goods must have a smooth and stable base. · The smallest width of the conveyed goods must not be less than 200 mm. · The conveyed goods should rest on at least 3 roller axles. · This determines the required pitch = axle spacing. · Frame: U-profile 20/70/20 mm, galvanized (aluminum frame available on request). · Rollers: ball-bearing mounted, galvanized steel rollers, Ø 48 mm, or ball-bearing mounted plastic rollers; ball-bearing mounted plastic rollers with stainless steel balls available on request. · Curves: inner radius 800 mm (different radii available). · ¹Note: with a pitch of 75 mm, the length will be 975 mm instead of 1000 mm, and 1950 mm instead of 2000 mm. · Additional available axle spacings: 50 mm, 125 mm, 150 mm, and 200 mm. · Other technical specifications: Size: straight, 1 m. · Overall width: 440 mm. Iedpoz U Ttpjfx Ag Ajtn · Design: with steel rollers, galvanized.

Condition: new, functionality: fully functional, Year of construction: 2025, A double teeth roller crusher is a type of roller crusher commonly used in industries that involve the crushing of various materials, such as mining, metallurgy, building materials, and chemical processing. This crusher is characterized by its two pairs of closely spaced, parallel, and oppositely rotating rolls with "teeth" or "knurling" on their surfaces. The teeth are designed to grab and crush the material, providing efficient and uniform size reduction. Here are key features and aspects of double teeth roller crusher equipment: 1. Double Roller Design: - The crusher features two parallel, counter-rotating rollers, each with a set of teeth or knurling on its surface. The dual roller design facilitates a consistent and efficient crushing process. 2. Teeth Configuration: - The teeth on the rollers are designed to grip and crush the material. The arrangement and shape of the teeth may vary based on the specific application and the characteristics of the material being processed. 3. Adjustable Gap Settings: - The gap between the rollers can usually be adjusted to control the size of the crushed particles. This feature allows for customization of the final product size. 4. Material Feed and Discharge: - Material is typically fed into the top of the crusher and is crushed between the rotating rollers. The crushed material is discharged at the bottom of the machine. 5. High Efficiency: - Double teeth roller crushers are known for their high efficiency in crushing various materials. The dual roller design provides a more consistent and controlled process compared to single roller crushers. 6. Versatility: - These crushers are versatile and can be used for various materials, including coal, limestone, slag, clay, and other similar materials. 7. Application in Mining and Processing: - Double teeth roller crushers are commonly used in the mining industry for the crushing of minerals and ores. They are also utilized in other industries for size reduction and processing of materials. 8. Dust and Noise Control: Itsdpfxeq Nga Us Ag Asn - Some double teeth roller crushers are equipped with features to control dust emissions and reduce noise during operation, improving the working environment. 9. High Torque and Power: - A powerful motor and a robust drive system are essential components to drive the rotation of the rollers, providing the necessary torque and power for efficient crushing. 10. Maintenance and Safety: - Regular maintenance is essential for optimal performance. Safety features, such as emergency stops and safety guards, are often incorporated to ensure safe operation. 11. Application in Size Reduction: - Double teeth roller crushers are effective in size reduction and are suitable for applications where precise control over the final product size is crucial. It's important to note that the specific design, features, and applications of double teeth roller crushers can vary among different models and manufacturers. When selecting or using this type of equipment, it's advisable to refer to the manufacturer's guidelines and specifications for proper operation and maintenance.