Used Excello 411/4 for sale (58,959)

Condition: used, Year of construction: 1988, Item 1.0 Precision turntable make EIMELDINGEN with aerostatic axial bearing Table diameter 3,400 mm Total height approx. 1,230 mm Centering bore Ø 250H7X 25 mm Permissible transport load 20,000 kg Holding torque of the table clamp 2,400 daNm Table speed 0.002 - 2 min Dead weight approx. 22,000 kg Operating voltage 380 V, 50 Hz. Control voltage 24V Positioning accuracy (without controller error) ± 1" Plan accuracy 0.02 mm Axial run-out accuracy 0.01 mm Concentricity deviation of the centering bore 0.01 mm Itjdpfju R Nm Hjx Aayjk Resolution of the position measuring systems 0.0001° Item 2.0 3-axis cross-bed boring mill Technical data Column stroke transverse "X" 500 mm Horizontal slide stroke "Z" 650 mm Vertical headstock "Y" 800 mm Rapid traverse speed Y + Z 8,000 mm/min Feed speed (infinitely variable) 0-1000 mm/min Spindle drive power 15 kW Spindle diameter in front bearing 100 mm Speed range 0-4000 rpm Tool holder ISO 50 Position tolerance Tp (1000) 0.012 mm Position spread Ps 0.008 mm Position deviation PA 0.008 mm Measurements carried out at room temperature + 20°C. Item 3.0 Grinding device for clamping fixture Item 4.0 Coolant system/chip disposal Total coolant volume 1,200 l High-pressure pump for unit 1 60 l/min 10 bar Low-pressure pump for units 2+3 40 l/min 2 bar Flushing pump 200 l/min 0.2 bar The pressure of the high-pressure pump is monitored. A rinsing hose for cleaning the workpiece and clamping device is available. General: Data of the complete system Base area of the entire system approx. 8,800 x 10,800 mm Base area of the actual machine approx. 8,000 x 6,200 mm Max. Machine height without workpiece approx. 3,700 mm Max. Machine height with workpiece approx. 5,500 mm Operating voltage 380 V. 50Hz. Control voltage 220 V./24 V Total installed power approx. 55 kW Max. Power consumption in normal operation approx. 28 kw

Condition: excellent (used), 2 - Used Urban AKS 4110 head welding machine Itodpfoykp Dxjx Aayek - Heated stainless steel blades on top - Heated stainless steel blades on bottom - Weld seam limitation: 0.2 mm - Maximum welding length: 3.25 m - Set of support arms

Year of construction: 1993, condition: good (used), functionality: fully functional, machine/vehicle number: RH 241-1-50-30v, used REIFENHÄUSER single-screw extruder with screw size : diameter 50 mm x 33v grooved feed zone and degassing zone type RH 241-1-50-30v with DC-drive 30,2 kW year 1993 Itjdepy Eygspfx Aaysk with installed switch cabinet Fully functional You are welcome to view this (and other) extruders at our warehouse in Königswinter The machine can be switched on and demonstrated when empty. The screw has been removed and cleaned.

Condition: ready for operation (used), IM Very good condition. Itodpevunm Ajfx Aayok

Condition: ready for operation (used), Year of construction: 2014, functionality: fully functional, cutting height (max.): 110 mm, For sale: a Forma DZ 4 - 450 multi-blade saw with four positionable saw blades equipped with lasers. Each blade is driven by its own 11 kW motor. Maximum timber thickness: 110 mm. Board length: up to 6.0 meters. Iodpfxezul Dns Aayotk The set also includes an infeed roller table and an outfeed roller conveyor with side ejectors.

Condition: excellent (used), Year of construction: 2016, operating hours: 4,500 h, functionality: fully functional, machine/vehicle number: A305/K1161, WDB flexo printing machine for UV inks. 4 printing units, printing width 1350 mm. The machine was used as a test machine for development purposes and has seen little use. The printing machine is operational and can be tested at any time. Itjdpfx Ajxqml Esayjk

Condition: good (used), CNC control unit, power supply, switching power supply, servo module, control unit, Pro module, controller, compact control Itodpfx Aasx Idv Sjyok -Manufacturer: Klöckner Moeller, compact automation unit with 5x SUCOcontrol -Type: PS4-201-MM1 / 3x LE4-116-DX1 / LE4-116-XD1 -Individual components: see photos -Price/Sale: only complete set -Transport dimensions: 400/200/H85 mm -Total weight: 2.0 kg

Condition: good (used), CNC controller, power supply, switching power supply, servo module, control unit, Pro module, controller, compact controller, PLC controller Itsdpfxox Ifalo Aayjk -Manufacturer: Klöckner Moeller, compact automation unit with 5x SUCOcontrol -Type: PS4-201-MM1 / 3x LE4-116-XD1 / LE4-116-DX1 -Individual components: see photos -Price/Sale: only complete set -Transport dimensions: 400/200/H85 mm -Total weight: 2.0 kg

Condition: used, Ex-Cell-O XG620 Excello XG 620 Siemens CNC overhauled 2011 docs available ball groove milling for CV constant velocity joints - homokinetic joints Iedpourt Tlefx Aaystk This machine can be inspected in our warehouse in Gussago BS Italy (Milan Area)

Condition: good (used), Year of construction: 1980, Bandsaw blade dimensions: recommended size 3400 / 3200 mm Cutting width: 400 mm Bandsaw blade length min./max.: 3200 / 3400 mm Bandsaw blade width: 20 x 3 mm Cutting speed: 10 - 2150 / 8 steps (manual) m/min Table size: 670 x 670 mm Table height above floor: 1020 mm Table tilting +/-: left 10° and right 30° Table movement horizontal: 270 mm Total power requirement: approx. 1.5 kW Isdpfxezvnlqs Aayotk Machine weight approx.: 650 kg Machine dimensions (LxWxH): 1.2 x 1.05 x 2.0 m

Condition: like new (used), Like-new industrial PC for automation, visualization, and SCADA applications. Rugged rack-mount PC with redundant power supply and RAID system. Manufacturer: Siemens Type: Industrial PC Series: SIMATIC IPC647D Article number: 6AG4112-2JP41-0DX6 Condition: Like new Serial number: VPM5954764 Supply voltage: 110/230 V AC Power supplies: Redundant RAM: 16 GB DDR3 SDRAM Dual Channel Processor: Intel Core i5-4570TE Processor cores: 4 Mass storage: RAID1 Hard drives: 2 × 1 TB HDD Hot Swap Operating system: Windows 10 IoT Enterprise 2016 LTSB 64 Bit Communication: PROFINET Ethernet interfaces: 2 Ethernet LAN 1 MAC address: D4:F5:27:29:90:32 Ethernet LAN 2 MAC address: 20:87:56:F4:C5:7A Slots: 4 Slot 1: PCIe x16 Slot 2: PCIe x16 Iodpjzduwcofx Aaystk Slot 3: PCI Slot 4: PCI USB ports (front): USB 2.0, USB 3.0 Drives: Hot-swap bays (front) Country of manufacture: Germany

Condition: new, Year of construction: 2025, functionality: fully functional, cutting height (max.): 410 mm, BEHRINGER HBE 411 A Dynamic, BRAND NEW MACHINE! manual positioning 18 cut monitoring 22 saw drive 5.2 kW 50-2 chip conveyor 100 5 Micro 250 bundle clamping device 440 bar start detection 535 retraction cylinder 550 Iedpszixx Iefx Aaystk clamping pressure regulation 832 line laser 940 lighting 941 cutting channel extension Behringer New Machines: Come-See-Buy Available immediately from stock Warranty from date of purchase Machine downtime? Fast exchange available Delivery and installation on request Available immediately from stock

Condition: good (used), Year of construction: 2007, functionality: fully functional, working width: 1,400 mm, roller diameter: 240 mm, passage height: 80 mm, height adjustment type: electric, working height: 870 mm, roll width: 1,500 mm, workpiece height (max.): 80 mm, Bürkle DAK 1400 adhesive application machine, from the first owner, in well-maintained condition: – Machine for single- and double-sided adhesive application – Adhesive application on the top and bottom (4-roller machine) – Robust industrial design – Direct drive of the application rollers – Separate direct drive of the metering rollers – Metering gap adjustment with mechanical digital display – Height adjustment with mechanical digital display – Roller parallelism adjustable via sliding coupling – Infeed with 3 driven rollers for part length min. 350 mm – Outfeed with 3 driven blade disks for part length min. 350 mm – Frequency-controlled drive 6-30 m/min – Motorized height adjustment via push buttons Itodpfxjzuv Dfe Aayok – Working width max. 1400 mm – Clearance height up to 80 mm – Working height above floor approx. 870 mm – 2 application rollers Ø 240 mm – Grooving 20 pitches per inch – 2 metering rollers Ø 190 mm – Roller width 1516 mm – Drive power 3 kW – Operating side Right – Paint finish RAL 7035 light gray – Year of manufacture 2007, first owner, well-maintained condition – Sale from location Karlsruhe / Southern Germany – Inspection and trial operation possible by arrangement

Condition: good (used), Year of construction: 1973, rust size: 700 x 650 x 1.100 mm Itedpfx Aajzvfdqsyjk batch weight: 1.000 kg Temperature: Max. 750 °C connected load: 78 kW Equipment: Incl. Control system (should be renewed) + Charging machine others: Furnace can be moved under nitrogen

Condition: ready for operation (used), Year of construction: 2015, machine/vehicle number: KK/126675, functionality: fully functional, cutting height (max.): 100 mm, saw blade diameter: 315 mm, saw blade bore: 30 mm, overall weight: 250 kg, intake manifold diameter: 120 mm, TECHNICAL DETAILS Maximum cutting height: 100 mm Cutting height at 45°: 70 mm Minimum saw blade diameter: 250 mm Iedpfx Aaezuwuxsyetk Maximum saw blade diameter: 315 mm Saw blade bore: 30 mm Saw unit tiltable: 45° to 90° Table and guides Roller table length: 840 mm Table width: 560 mm Parallel guide adjustment: 1,300 mm Dust extraction Dust extraction port diameter: 120 mm MACHINE DETAILS Electrical data Voltage: 400 V Current consumption: 10 A Fuse rating: 16 A Main motor power: 3.0 kW Dimensions & weight Dimensions (L x W x H): 2,100 x 900 x 1,050 mm Machine weight: 250 kg Transport packages: 1 piece EQUIPMENT CE marking Note: The shaft and saw blade for the scoring unit are present, but the drive motor for the scoring unit is missing.

Condition: excellent (used), Year of construction: 2014, functionality: fully functional, Heidelberg SX 52 – 4 H LE-UV - 2014 Year 2012 ONLY 36 mio imp. Iodpfszkal Sex Aayotk 4 colors offset Press of size 37 x 52 cm equipped with : • PRINECT PRESS CENTER • PRINECT EASYCONTROL (Color Measurement System) • AUTOPLATE • PRESET (automatic size setting) • High Pile Delivery • ALCOLOR dampening with VARIO • CombiStar Technotrans Refrigeration • Ink Temperature control • All Automatic Washers (rollers, blanket and impression cylinders) • PowderStar AP 110 powder spray • StaticStar antistatic system • Speed 15.000 Sheet Per Hour • Can print up to 0,5 mm • Low Energy IST UV Dryer in the delivery • Enveloppe Feeder “Super Feeder” This machine is currently installed in a printing company in Switzerland and is in excellent condition. It can be inspected and seen running under production. Available immediately

Year of construction: 2021, operating hours: 5,000 h, condition: used, functionality: fully functional, EPS Complete Production Line For cutting and packaging EPS blocks: Model: VIRO HV Q-4 Y 2021, Price: €459,000 Includes a side scrap handling unit, bale/bundle packaging unit, bale marking and paint marking unit for color-coding bales, and a separate dust compaction unit for stack formation. Ijdpfxezcdqqe Aayjtk Also includes a weighing unit, automatic block tilting, automatic cutting wire adjustment, optional manual removal, and a semi-automatic equipment group for producing bales with a minimum size of 50x100 cm and for creating stacks. Designed for handling blocks 3-4 meters long. Used for 5,000 operating hours. In like-new condition. EPS Block Molding Machine: Erlenbach Y2004 EBV 3080x1040x1040, Price: €77,000 EPS block production equipment, automatic operation, with mixing of fresh and recycled materials. Reliable, accurate, and easy to operate. Used for 18,000 operating hours. EPS Pre-Expander: Y 2008 Erlenbach Pre-expander EVD 1000, Price: €42,500 Batch pre-expansion equipment with automatic weighing and fluidized bed. Reliable, precise. Used for 18,000 operating hours. Steam Boiler Y2008, Manufacturer VASFA Kft Szolnok, Type AKH 1/12 EU, Price: €51,000 1 t/h, 660 kW Operating pressure: 12 bar Checked pressure: 19.4 bar Reliable, continuously maintained. Used for 18,000 operating hours.

Condition: new, Year of construction: 2024, NEW Grundfos - The pump is fitted with a 3-phase, fan-cooled, permanent-magnet, synchronous motor. The motor efficiency is classified as IE5 in accordance with IEC 60034-30-2. The motor includes a frequency converter and PI controller in the motor terminal box. This enables continuously variable control of the motor speed, which again enables adaptation of the performance to a given requirement. An operating panel on the motor terminal box enables setting of required setpoint as well as setting of pump to "Min." or "Max." operation or to "Stop". The Grundfos Eye indicator on the operating panel provides visual indication of pump status: "Power on": Motor is running (rotating green indicator lights) or not running (permanently green indicator lights) "Warning": Motor is still running (rotating yellow indicator lights) or has stopped (permanently yellow indicator lights) "Alarm": Motor has stopped (flashing red indicator lights). Communication with the pump is possible by means of Grundfos GO Remote (accessory). The remote control enables further settings as well as reading out of a number of parameters such as "Actual value", "Speed", "Power input" and total "Power consumption". Ijdpfoyug Hxjx Aayotk The terminal box has a number of inputs and outputs enabling the motor to be used in advanced applications where many inputs and outputs are required: • two dedicated digital inputs • three analog inputs, 0(4)-20 mA, 0-5 V, 0-10 V, 0.5 – 3.5 V • 5 V voltage supply to potentiometer and sensor • one analog output, 0-10 V, 0(4)-20 mA • two configurable digital inputs or open-collector outputs • two Pt100/Pt1000 inputs • LiqTec, dry-running protection sensor input • Grundfos Digital Sensor input and output • 24 V voltage supply for sensors • two signal-relay outputs (potential-free contacts) • GENIbus connection • interface for Grundfos CIM fieldbus module.

Condition: used, machine/vehicle number: 007668, Max. panel width: 1200 mm Max. panel length: 2400 mm Movement system: suction cups. Itsdpou Huwcofx Aayek

Condition: used, -Overall dimensions (W x D x H): 1300 x 2750 x 2668 mm -Chamber dimensions (W x D): 820 x 1650 mm -Number of decks: 4 -Number of doors: 1 door of 820 mm per deck -Left-hand control panel -Right-hand door handle -Baking surface: 5.45 m² -Electrical power: 27 kW -Weight: 2200 kg -Maximum baking temperature: 300°C -DIGITAL control panel with 99 programmable settings (optional: TOUCH SCREEN) -Energy control: BI-TEMPERATURE with 2 independent probes and separate crown/base temperature management -Steam: equipped with independent steam devices positioned under each deck and steam evacuation system Ideally suited for baking bread and pastry products, the 4-deck 82 electric deck oven is designed to deliver outstanding performance in a compact format. With a door width of 820 mm, this oven is perfect for areas with limited space or restricted access. Isdpfjw H R Ulsx Aayjtk Key Features - Maximum Baking Temperature: Up to 300°C, ideal for a wide range of bakery and pastry products. Ndeyow H R Ule Tdxugea - Control Panel: Digital, with 99 programmable settings and multi-stage analog control, equipped with a weekly timer for automatic startups (Touch Screen option available). - Energy Control: Dual-temperature with two independent probes and separate deck/base temperature management for precise baking control. - Exterior Finish: Stainless steel for maximum durability and hygiene. - Baking Slabs: Combination of refractory gravel and cement with metal reinforcement for uniform baking. - Steam: Independent steam devices positioned beneath each deck and steam evacuation system. Why Choose the 4-Deck 82 Electric Deck Oven This electric deck oven is the ideal solution for bakers and pastry chefs looking to maximize production while minimizing footprint. Its innovative design and extensive features ensure perfect baking results every time. The listing was translated automatically. Translation errors are possible.

Condition: excellent (used), Year of construction: 2014, functionality: fully functional, operating hours: 35,000 h, pressing force: 170 t, stroke length: 445 mm, overall weight: 16,000 kg, year of last overhaul: 2026, Equipment: CE marking, documentation/manual, TRUMPF TruBend 5170 / 4m bending length Year of manufacture: 2/2014 Press force: 1700 kN (170 tons), bending length: 4,080 mm Machine operating time: 35,000 hours, hydraulic operating time: 25,000 hours Control system: TASC 6000 Configuration: 1 active bending assistant, 2 support consoles 4-axis backgauge CNC-controlled crowning Iodpjzrnpujfx Aaystk Hydraulic upper tool clamping Hydraulic lower tool clamping I-axis BendGuard Last inspected and measured by Trumpf 6/2026

Condition: used, Year of construction: 2023, operating hours: 259 h, functionality: fully functional, machine/vehicle number: 1200002, travel distance X-axis: 1,270 mm, travel distance Y-axis: 508 mm, travel distance Z-axis: 635 mm, Like-new Haas VF-4-EU CNC vertical machining center with only 259 operating hours. The machine is in excellent optical and technical condition. The VF-4 is already fully prepared for 4-/5-axis operation from the factory – the extensive 5th-AXIS package is installed: - Axis cards for the 4th and 5th axes - Dynamic workpiece offset - Tool center point control - High-speed machining - Programmable coolant nozzle - Wireless Renishaw measuring probe and tool probe In addition, the machine is unusually well-equipped: - TSC – internal coolant supply with 21 bar - Spiral chip conveyor - Complete coolant maintenance package (automatic replenishment, oil separator, mist collector) - Fast 30+1 tool changer - Spindle with 10,000 rpm The control system is the current Haas Next Generation Control with touchscreen, WLAN, Ethernet, and HaasConnect remote monitoring. This makes the machine immediately ready for demanding machining tasks. The original transport securing devices are available. An original Haas tool cart for SK40 is also included. Inspection and demonstration under power are possible at any time by appointment. Loading and transport can be arranged. A suitable TRT-210 CNC rotary table is offered in a separate listing and can be included in the package if desired. The LANG base plates are not included in the scope of supply. Technical data: - Travel ranges X / Y / Z: 1,270 × 508 × 635 mm - Spindle nose to table: 107 – 742 mm - Table: 1,321 × 457 mm, 5 T-slots (16 mm), max. table load 1,588 kg - Spindle: 10,000 min⁻¹, BT/CT 40, inline direct drive, liquid-cooled - Drive power: 22.4 kW - Max. torque: 122 Nm at 2,000 min⁻¹ - Rapid traverse X / Y / Z: 25.4 m/min - Feed rate max.: 16.5 m/min Iedpfx Aajy Tp E Asyotk - Tool changer: Side SMTC, 30+1 positions - Tool max. diameter / length / weight: 64 mm / 330 mm / 5.4 kg - Tool change time (chip-to-chip): approx. 3.6 s - Connection voltage: 400 V / 50 Hz, 3-phase (internal transformer installed) - Compressed air: approx. 113 l/min at 6.9 bar - Coolant tank: 208 l - Weight: approx. 6,260 kg (with conveyor) Control: - Haas Next Generation Control with touchscreen - 1 GB program memory, Ethernet + WLAN - HaasConnect (remote monitoring), HaasDrop (wireless file transfer) - M130 media display, safe run, synchronized thread drilling - Early detection module for power failure, overvoltage protection - Equipment / options (all installed from the factory) - 5-axis package VF-YT (4th + 5th axis drive-side prepared, DWO/TCPC, high-speed machining, programmable coolant nozzle) - Wireless Renishaw measuring probe system (intuitive) - TSC – internal coolant supply through the spindle, 21 bar - Spiral chip conveyor - Coolant maintenance package (automatic replenishment, oil separator, mist collector) - Additional coolant filter (bag filter 25 µm) - Filter set for chip sump (200 µ) - Variable coolant flow (M-code controlled) - Blowing of the inside of the machine door - Lifting eyes, touchscreen, door lock

Condition: used, Year of construction: 2021, functionality: fully functional, Format4 Dual 51 planer and thicknesser from Felder, purchased on April 29, 2021, for precise planing and thicknessing of solid wood. Powerful combination machine for professional woodworking shops. Key technical data: - Machine type: Planer and thicknesser - Model: Format4 Dual 51 Ijdpfx Aajzulhtjystk - Planing width: approx. 510 mm - Thicknessing width: approx. 504 mm - Thicknessing height: approx. 3–254 mm - Planing table length: approx. 2250 mm - Max. chip removal: approx. 8 mm - Feed rate: Vario-Feed approx. 4–16 m/min - Cutterhead: approx. 120 mm diameter, Silent-Power spiral cutterhead also possible depending on the configuration - Motor power: approx. 5.5 kW, optionally higher depending on the configuration - Combined design saves space compared to two separate machines - Central base machine for solid wood processing, furniture making and interior design - Attractive for carpentry shops, workshops and training companies No guarantee

Condition: used, mileage: 256,000 km, power: 120 kW (163.15 HP), fuel type: diesel, gearing type: automatic, overall weight: 2,800 kg, first registration: 08/2014, emission class: euro5, color: white, number of seats: 6, Year of construction: 2014, Equipment: ABS, air conditioning, all wheel drive, central locking, electronic stability program (ESP), parking heater, soot filter, Special equipment: Audio system Audio 20 (radio with CD player), AUX-IN connection, exterior mirrors electrically adjustable and heated, both sides, passenger airbag (dual airbag), digital tachograph, battery 100 Ah, windows for rear doors/tailgate with wiper/washer system, additional interior light in the cargo area, exterior temperature display, cargo area partition with window, center console at the front with 1 DIN slot, smoker's package, tires 205/65 R16C 103/101 T, spare wheel with jack, interior rearview mirror, safety belt system with warning system (driver's side), seats in the driver's cab: double passenger seat, seats in the cargo/passenger compartment: 1st row, 3-seater bench, socket (12V connection) in the cargo/passenger compartment, auxiliary heater, additional heater (hot water), battery 100 Ah, two-way speakers at the front Additional equipment: Adaptive brake light, airbag driver's side, version: Vito Mixto, exterior mirrors aspherical, both sides, mounting rails for roof rack, window in the cargo/passenger compartment: - fixed, front left, window in the cargo/passenger compartment: - fixed, front right, windshield with antenna, generator 200 A, tailgate, wooden floor in the cargo area, interior lights in the cargo/passenger compartment: 2 additional, interior filter: pollen filter, body/superstructure: extra long, body/superstructure: standard van, steering wheel (steering column mechanically adjustable), truck registration, model refinement, engine 2.1 L - 120 kW CDI CAT, wheelbase 3430 mm, low emissions according to Euro 5 emissions standard, sliding door cargo/passenger compartment on the right, seat equipment: quick-release mechanism for 2 seat rows in the rear, seat cover/upholstery: fabric Lima, trim in the cargo/passenger compartment: - with roof lining, trim in the cargo/passenger compartment: hard fiber, halfway up, warm air duct to the cargo/passenger compartment. Itsdpfxozuqaho Aayek Subject to prior sale, errors and changes.

Condition: used, Year of construction: 1990, 1990 Innse 4 Aries CF-S-WZ 150 CNC Horizontal Multi Pallet Milling Machine with Siemens Sinumerik 880M Control Itjdpfxezvp I Ts Aayjk Maximum Table Load 100 Ton. Maximum Spindle Speed 2,500rpm (60kW Motor). Axis Travel 'X'=11,800mm, 'Y'=3,500mm, 'Z'=800mm, 'W'=1,150mm. Spindle Taper ISO 50. 300 Position ATC. S/N: 1858. With Angle Heads & Coolant System. Note: Machine Has Problems With The Head & Electronics.