Used Fein Dsse 642 for sale (216)

Condition: used, FEIN Support Grinder Gkedpex A Imbsfx Abfea Serial No.: G 95304 Model MB 406 Max. grinding wheel diameter: 100 mm Max. grinding wheel width: 20 mm Grinding wheel mounting: Ø 20 mm Motor speed: 6,800 rpm Motor power: 350 Watts Mains connection: 220 Volt, 50 Hz - Grinding spindle driven by flat belt - 1 universal grinding wheel Ø 98 x 20 mm included Weight: 11 kg Good condition

Condition: used, Support grinder for lathe FEIN Type: MB 2101 Ident No.: 2287997 Grinding wheel diameter: max. 150 mm Grinding wheel width: max. 20 mm Mounting taper: Ø15.5 - Ø13 mm, length 21 mm Motor speed: 4400 rpm Gkodpfsx A Imhex Abfsa Motor power: 550 Watt Electrical connection: 380 Volt, 50 Hz - Grinding spindle drive via flat belt - 1 pc. grinding wheel mount Ø 32 mm - 1 pc. universal grinding wheel Ø 146 x 20 mm Support grinder weight: 19 kg In good condition

Year of construction: 1989, condition: used, Palletizer 1. Folding unit: 6 folding pockets Combination folding rollers Downstream knife shaft Noise protection device 2. Folding unit: 4 folding pockets Combination folding rollers Noise protection device Godpfx Asbi U Nzobfska 3. Folding unit: 2 folding pockets Combination folding rollers Noise protection device

Condition: good (used), Year of construction: 1996, overall weight: 1,000 kg, total length: 3,500 mm, total width: 1,000 mm, total height: 1,200 mm, Pipe bending machine with electric control, 4-fold bending angle pre-selection and digital display  Hydraulicbendingdriveoperatedbyhandlevervalve Hydraulic bending drive, operated by hand lever valve Follower-type pressure die (sliding guide) Hydraulic mandrel retraction Pipe circular saw with coolant lubrication and automatic feed Pipe deburring unit for internal and external deburring Hydraulic power unit as basic seating for attaching a cutting ring assembly or flaring device  Machine mobile and flexible to use Max.Tube Ø: 42mm Min. Tube Ø: 6mm Gjdpfet Dk Ukox Abfska Max. Wall thickness:3mm Max. Bending radius:5mm Min. Bending radius:180mm Max. bending length:2000mm Deburring attachment:Yes Sawing attachment: Yes Flair attachment: Yes Length: 3500mm Width: 1000mm Height: 1200mm Weight: 1000kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: used, Year of construction: 2026, Working width: 6.40 meters Width in working position: 6.75 meters Number of rotors: 6 Number of tine arms per rotor: 6 Transport width: 2.95 meters Transport height: 3.30 meters Turning at the field edge: by manually adjusting the angle of the wheels Grass deflectors above the tine revolutions Fixed spreading angle adjustment Rotor drive via DIGIDRIVE finger clutch made of forged, case-hardened steel PTO speed: 540 rpm Godpfx Abozdmt Nefska Balloon tires 15x6.00-6 Outer rotors hydraulically folded up for transport Three-point linkage, Category 2 Swivel head trailing device Mechanical vibration damper 1 single-acting hydraulic cylinder Power requirement at the PTO: 22 kW/30 hp Weight: approx. 850 kg Location: 54595 Prüm

Year of construction: 2023, condition: new, Number of spindle: 6 Max bar diameter: 32/42 mm Max. length of feeding: 125 mm Spindle speed: max 4.250 rpm Godpokvnu Hofx Abfoka This machine is perfect for the fabrication of medium and mass component productions until 42 mm diameter and 47 mm with integrated bar loader. ther solution, it can be equiped in second operation machine by loading rough component to finish with a maximum of 130 mm capacity. Options : Machine can receive 7 CNC axis maximum, adding 840D Siemens control, station on demand

Condition: excellent (used), Pfeiffer DUO 65 Two-Stage High-Performance Rotary Vane Pump Here we offer a Pfeiffer DUO 65 two-stage high-performance rotary vane pump. Gkjdpfjzianqox Abfea Pfeiffer DUO 65 Two-Stage High-Performance Rotary Vane Pump Two-stage high-performance rotary vane pump with a pumping speed of up to 70 m3/h. With a 3-phase motor. With a temperature sensor (3TF) for optimal motor protection. Integrated gas ballast and HV safety valve. For all applications in the coarse and fine vacuum range. Duo 65, 3-phase motor, 3TF, 200-230 / 346-400V, 60 Hz Type: PK D46 642 A with ONF 35/65 oil mist separator, corrosion-resistant version. It sits on the pump's exhaust nozzle and prevents air pollution by oil mist. Type: PK Z40 150 Scope of delivery: (See picture) We will gladly answer any further questions you may have over the phone. Written orders can be placed via email or fax.

Condition: good (used), Touch screen, control panel, display, operator panel, PLC, Simatic Panel PC, touch screen, touch panel, Simatic Multi Panel, Touch Multi Panel -Manufacturer: Siemens, Simatic Touch Panel with indicator light -Type: 6AV6 642-0DC0-1AX1 -Dimensions total: 300/165/H400 mm -Weight: 8.3 kg Gkedpfewc Sb Sex Abfja

Condition: used, Electric motor, three-phase motor -Power: 0.59/0.74/0.95 kW -Speed: 925/1410/2820 rpm Gkjdpjdzzg Rofx Abfoa -Shaft: Ø 22 x 60 mm -Construction: B3 -Dimensions: 360/278/H210 mm -Weight: 35 kg

Condition: used, weight of the machine ca. 90 kg Gksdjzhcihopfx Abfoa

Year of construction: 1989, condition: ready for operation (used), For the deposition of thin metallic layers in the nanometer range, of different materials, cathodes chrome and copper,1 chamber, rotating basket, pre-pump set, turbo pump, hot and cold water supply for heating and cooling of the plant, Cooling plant L&R Kältetechnik WHK-15-W, year of construction: 2004, High voltage source ADS Maris, control cabinet, with control Siemens, complete plant control retrofit, year of construction: 2004 Gkedpfjhwm Iisx Abfja

Condition: excellent (used), functionality: fully functional, Year of construction: 1989, pipe diameter (max.): 42 mm, pipe length (max.): 3,000 mm, bending radius (max.): 180 mm, wall thickness: 3 mm, Pipe bending machine with electric control, 4-fold bending angle pre-selection and digital display  Hydraulic bending drive operated by hand lever valve Hydraulic bending drive, operated by hand lever valve Follower-type pressure die (sliding guide) Hydraulic mandrel retraction Pipe circular saw with coolant lubrication and automatic feed 6 mandrels up to 24 mm included x 3000 mm Pipe deburring unit for internal and external deburring Hydraulic power unit as basic seating for attaching a cutting ring assembly or flaring device  Machine mobile and flexible to use Max. tube Ø: 42mm Min. tube Ø: 6mm Gjdouccw Hopfx Abfeka Max. Wall thickness: 3mm Max. Bending radius:5mm Min. bending radius:180mm Max. bending length:3000mm Deburring attachment:Yes Sawing attachment: Yes Flair attachment: Yes Length: 3500mm Width: 1000mm Height: 1200mm Weight: 1000kg

Condition: refurbished (used), functionality: fully functional, Used HEIDELBERG TD 78/642 folding machine, sold as seen and approved. Complete with VFZ knife, pallet feeder, and COMBI pockets. Various deliveries with roller (SBP-VSA) available. Option for complete overhaul; cost estimate upon request. Gksdpfeyzxfzsx Abfea

Year of construction: 1997, condition: used, machine/vehicle number: 540897, pipe diameter max. 1,500 mm tool diameter max. 200 mm feed rate 40 mm / min sawing of pipes in steel and greycast iron  with wall thickness of up to 22 mm  Gksdpsghy Azsfx Abfea milling of pipes in steel and grey cast iron with wall thickness of up to 15 mm cutting speed 35 m / min compressed air requirement 6 bar - 2m³ / min weight approx. 90 kg

Year of construction: 1997, condition: used, machine/vehicle number: 540897, pipe diameter max. 1,500 mm tool diameter max. 200 mm feed rate 40 mm / min sawing of pipes in steel and greycast  iron with wall thickness of up to 22 mm milling of pipes in steel and grey cast iron with wall Gsdpfxed Srdxj Abfjka thickness of up to 15 mm cutting speed 35 m / min compressed air requirement 6 bar - 2m³ / min weight approx. 90 kg  

Condition: used, Year of construction: 1999, functionality: fully functional, pressing force: 630 t, year of last overhaul: 2023, Equipment: CE marking, documentation/manual, Precision cutting press with coiler and straightening machine Table size: 1,350 mm x 950 mm Godpfx Abszrw R Usfeka Good condition, from series production, regular maintenance.

Condition: good (used), functionality: fully functional, I am selling a Scheer FM 2-30000 joining and precision cutting machine from my carpentry workshop. The machine is still in good condition but is no longer being used. That is why I am selling it. Gkodpfx Asztgnlobfsa The machine can be inspected and tested on site in Stuttgart.

Condition: good (used), Year of construction: 2005, Turning machine SCHERER FEINBAU PM1-CNC, machine no. 65101, year of manufacture 2005, power requirement 4 kVA, weight 420 kg, with oil filtration system CLEANMIST CM500. Gkedpfxjztc Eao Abfoa

Condition: good (used), functionality: fully functional, Type PM1-F-Z, data: Gedpfxeztknio Abfoka Center height: 110 mm Center distance: 160 mm Spindle bore: 23 mm 3 right-hand speeds and 3 left-hand speeds approx. 670 / 1140 / 2840 rpm

Condition: good (used), Year of construction: 1982, functionality: fully functional, Precision high-speed lathe make FEINBAU Machine No. 4891 Type PM1-FZB Year of manufacture 1982 Godpfjzp Uw Hex Abfeka Technical data : . Maximum turning length 90 mm Swing diameter over bed 220 mm Swing diameter over support 110 mm Center distance 160 mm Bore 23 mm Drive motor 0.65 / 1 / 1.3 kW Space requirement , length x width 1.6 x 0.8 x 1.2 m Scope of delivery : Collet chuck device for collets : K23 DIN 6341 Collets Hand lever cross support with adjustable stops Hand lever boring vise, with 2 x MK1 holders and stops . .. Ongoing purchase of used German machines without NC or CNC control .

Condition: excellent (used), Year of construction: 1987, pressure 320 t plate thickness 0 mm no. of strokes 80 Hub/min pressing capacity total 320 t stroke 30 - 80 mm table surface area unten: 630 x 740 mm table surface area oben: 630 x 630 mm total power requirement 60 kW This fineblanking press FEINTOOL HFA 320 was completely overhauled in 2019 and is in new condition with new CE mark MAIN RAM total force (nominal) 320 to stroke min. 30 mm stroke 80 mm V-RING nominal force 160 to stroke 30 mm COUNTER RAM nominal force 80 to stroke 30 mm TOOL DIMENSIONS lower table - width 630 mm Gsdpfxovwgl Ns Abfoka lower table - depth 740 mm upper table - width 630 mm upper table - depth 630 mm daylight max. 320 mm ELECTRICAL SPECIFICATIONS total power consumption 60 kW

Condition: good (used), functionality: fully functional, Technical data: Centre height 110 mm Centre width 160 mm Gkedpfx Ajznc Tyjbfsa Spindle bore 23 mm Motor power 1.7 kW Speed can be set via potentiometer from approx. 100 - 2,300 rpm 3 pre-selected speeds or 3 switching levels . Scope of delivery, machine with: Operating modes: Manual + automatic Pneumatic clamping device Tilt tailstock with 2 sleeves for K 12 collets, with control switch for switching Hand lever cross support with 4 stops, consisting of cross and longitudinal support .

Condition: excellent (used), functionality: fully functional, 1 x Tailstock lathe Precision engineering PM 1-FZ Gedpfx Aezl Dr Ejbfoka Equipment: - Hand lever cross slide with Tripan quick-change system - Electric tailstock for drilling and threading - Collet chuck with draw-in collets Technical data: - Spindle bore: 23 mm - Spindle speeds: 700/1400/2800 (left/right) - Center height: 110 mm - Distance between centers: 160 mm - Maximum diameter over bed: 220 mm Accessories: 20 x Draw-in collets 359 E K 23 (1 - 20 mm/ 1 mm increment) 1 x Draw-in collet in tailstock 319 E K 12 1 x Tripan tool holder with 1 cassette Operating manual (copy) Additional accessories, such as collets, are available at an extra charge. The machine can be inspected while powered on.

Condition: excellent (used), Year of construction: 1995, functionality: fully functional, 1 x Backturning lathe Precision engineering PM 1-FZ Year of manufacture: 1995 In very good condition with a comprehensive range of accessories. Equipment: - Hand lever cross slide with Tripan quick-change system - Electric tailstock for drilling and threading - Collet chuck with draw-in collets - Coolant system Technical data: - Spindle bore: 23 mm - Spindle speeds: 700/1400/2800 (left/right) - Center height: 110 mm - Distance between centers: 160 mm - Largest turning diameter over bed: 220 mm Accessories: 39 x draw-in collets 359 E K 23 (1 - 20 mm, 0.5 mm increments) + 5 x square collets 10 x draw-in collets in tailstock 319 E K 12 (1 - 10 mm, 1 mm increments) 1 x Tripan quick-change tool holder Gkjdpoqyfpmsfx Abfea with 1 cassette 1 x spindle in tailstock with MK 2 taper 1 x MK 2 drill chuck Röhm 1 - 10 mm 1 x simple clamping tool holder Operating manual (copy) Photos of the accessories will follow. Further accessories, such as collets with intermediate sleeves, are also available in stock. The machine can be inspected while powered on.

Condition: good (used), functionality: fully functional, Center height 110 mm Center width 160 mm Spindle bore 23 mm Gkedpszl Ew Nsfx Abfea 3 speeds for clockwise rotation and 3 speeds for anti-clockwise rotation