Used Felder G 380-4 for sale (79,061)

Condition: ready for operation (used), Year of construction: 2019, This Felder FORMAT 4 Tempora60.06LX edgebander was manufactured in 2019. It features an x-motion PLUS control system, chain feed with a speed of 10 m/min, and a Teflon-coated gluing unit for EVA or PUR granulate. The machine supports edge thicknesses from 0.4 to 3 mm and includes a multifunctional milling unit. Consider the opportunity to buy this Felder FORMAT 4 Tempora60.06LX edgebander. Contact us for more information about this machine. • Control system: x-motion PLUS • Chain feed • Feed speed: 10 m/min • Drive motor: 0.75 kW (S6) – 1.1 kW (S6) • Minimum workpiece length: 140 mm • Minimum workpiece width: 70 mm • Note: Minimum width varies depending on workpiece length, height, and surface finish. • Turntable edge magazine (rolled edge material) • Turntable diameter: 750 mm • Edge thickness: 0.4 – 3 mm • Extendable frame • Workpiece support extendable up to 450 mm • Upper pressure bar • Manually adjustable workpiece height: 8 – 60 mm • Edge feed • For rolls and rigid material • Joining unit • Power: 2.2 kW (2 × 1.1 kW) • Diamond cutter Z2 • Speed: 12,000 rpm • Gluing unit • Teflon-coated for 1.5 kg EVA or PUR granulate • Ready after approx. 10 min heating time • Tool-free quick-change system • Pressure unit • Pneumatically controlled • 1 driven and 2 conical pressure rollers • Shear • For roll edge material thickness: 0.4 – 3 mm • Cutting unit • Two high-frequency motors, each 0.35 kW, 12,000 rpm • Pneumatically swiveling 0° – 10° • Multifunctional milling unit (x-motion PLUS) • Flush and radius milling • One HF motor top and bottom, each 0.75 kW, 12,000 rpm • Each with 4 interchangeable blades • Corner processing unit • For soft and postforming workpieces • Front edge processing • Edge thickness: 0.4 – 3.0 mm • Workpiece height: 10 – 60 mm • Radius scraper unit Nlodpfx Akex D D R Sjuob • 2-axis motor-driven, position-controlled • Pneumatic release function • Polishing unit • Top and bottom

Condition: reconditioned (used), Modernized machine with new LTG-StoreControl P control system External dimensions: Height 5860 mm Width 2940 mm Depth 1180 mm 25 carriers with a payload of 165 kg each with clear usable dimensions: H = 380 mm Nlsdpfodnzg Nsx Akusb W = 2500 mm D = 410 mm Chain pitch 412 mm Total payload up to 4110 kg Storage table at 1000 mm above the top floor with rubberized worktop Color: GRAY/BROWN, surface cleaned, signs of wear possible Drive motor power: 1 x 1.8 kW / 400 volts Base machine for this modernization: SYS 180 from Kardex Subject to errors, technical changes, and deviations from the photos. Delivery and installation currently mainly in Germany and Austria and several neighboring countries

Condition: good (used), Attachment holders, standard holders and accessories, SASSEX spiral drill bits, Sassex spiral drill bits, reaming bits, Sassex reamers, Sassex holders, tool holders, drill bit mounts, twist drills Nodpfxsuhr Rao Akujlb -Mounted tool holder: 2 pieces -Recording: MK4 -Length: 380 mm -Dimensions: see photos -Submission/Price: complete -Transport dimensions: 380/100/H30 mm -Weight: 3.2 kg

Condition: ready for operation (used), Year of construction: 2021, travel distance X-axis: 4,000 mm, travel distance Y-axis: 1,670 mm, travel distance Z-axis: 500 mm, number of axes: 4, This 4-axis CNC processing center was manufactured in 2020. It features a 12 kW milling spindle with a speed range of 1000-24000 rpm and a C-axis rotation of 0-360°. The machine includes a 12-station linear tool changer and a comprehensive drill head with 16 spindles. It also boasts a robust safety system with a light barrier. Consider the opportunity to buy this Felder Format 4 Profit H 200 CNC processing center. Contact us for more information about this machine. • Automatic central lubrication • Working area: X 3300 mm / Y 1280 mm / Z 250 mm (clearance height from console level depends on clamping system) Nlodpfx Akjx D D Hmjuob • Operating terminal on left side of machine • Hand terminal with axis speed control and emergency stop • Software: Woodflash (CNC board, tool database, program editor) • Positioning display for workpiece support and vacuum suction cups • Vacuum connection for template milling (left side), connection diameter 12 mm • Vacuum pump: 1x, total suction power 90 m³/h @ 50 Hz or 108 m³/h @ 60 Hz • Milling spindle: 12 kW (S6), HSK F63, 1000–24,000 rpm, full rated power at ~12,000 rpm, air-cooled; C-axis 0–360° • Tool changer: 12-station linear on left side of machine stand, incl. pickup space for aggregates; max tool diameter 250 mm; max tool length 240 mm • Drill head DH 16 4H 2S: 12 vertical spindles (7X / 5Y); 4 horizontal spindles (2X / 2Y); pre-stroke 70 mm; drilling length 70 mm; shank Ø 10 mm • Groove saws: 2 (one X, one Y); max blade Ø 120 mm; max thickness 5 mm; continuously variable speed up to 7,500 rpm • Safety: front light barrier system

Condition: used, Year of construction: 2004, operating hours: 3,623 h, Equipment: all wheel drive, Equipment: * 3,623 operating hours * Deutz engine with 44 kW * 20 KM/H * Bucket * Forks * Additional work lights Nlodpfjyn Tt Eox Akujb * Quick coupler * Tires: 12.5-20 Other information: * 2 previous owners * German machine * Year of manufacture: 2004 * Total weight: 6,500 kg * Wheel loader, ready for immediate use In November 2009, at approx. 1,300 operating hours, a new tachometer unit was installed. Since 1972, your reliable partner for automobiles and commercial vehicles in 28832 Achim at the Bremer Kreuz. NutzfahrzeugZentrum Behnke always stocks around 200 vehicles from the areas of vans, commercial vehicles, and construction machinery! We continuously offer attractive financing options with special rates. If interested, we are happy to provide you with an individual quote! We welcome trade-ins of your commercial vehicle or construction machinery. If a new TÜV inspection is required, we will gladly provide an offer from our partner workshops. Please note: our offer is generally WITHOUT a new TÜV inspection. Delivery of your "new" commercial vehicle is possible by our external partners for an additional charge. The information provided in listings, online, on price tags, and in images are non-binding descriptions and do not constitute guaranteed properties. The seller assumes no liability/warranty for typing or data transmission errors. Listed equipment must be verified separately if applicable. Subject to errors and prior sale.

Condition: used, Year of construction: 2015, Kannegiesser inclined belt conveyor Hopper Filling Funnel GF 2750-470-380 Nedpfxsk Aa Swe Akujlb RA1311 This belt conveyor is from the year 2015 and is in good (used) condition. Additionally this conveyor is equipped with a height adjustment and can therefore also be used as an inclined conveyor. Due to the 2-layer PVC belt, the transported goods can be transported at a height of 260 mm up to a height of 750 mm. Due to a constant conveying speed of 0.3 m/s you benefit from a continuous material flow in your intralogistics. Technical data: Conveying length (NL): 2750 mm Framework width (NB): approx. 470 mm belt width (GuB): 380 mm Height / Belt run (BH): from 260 mm to 750 mm rising +/- 50 mm height adjustment Number of support feet: 2 pieces, movable on fixed rollers Load (kg/rm): 30 kg Conveying speed (v m/s): 0.3 m/s constant Drive: TM 113i drum motor Electrical data: 400 V / 50 Hz / 0.3 kW Deflection drum (UT): Ø = 60 mm, crowned steel, galvanized Belt return roller: Ø = 50 mm, galvanized steel, A12 IGM8 Belt: 2-layer PVC belt, black, smooth Year of construction: 11/2015 Construction / Design: CNC-lasered and edged sheet steel construction primed and painted in RAL 7035, fittings electrogalvanized, side guide 1.4016 Special feature / accessories: 1x motor coupling module incl. electrical pre-installation 3x light barrier lateral guide on both sides 70-620-840 mm / 80-390 mm high 2x emergency stop switches 1x end plate 640 mm high 1x baffle plate 1x deflection drum cover Execution centerantieb All prices net plus VAT from central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg For individual, professional advice, simply contact us. Simply contact us by phone or e-mail. We will be happy to help you with the planning and implementation of your projects. We look forward to hearing from you. With best regards, your team at Dr. Sonntag GmbH & Co. KG - Your specialist and contact for intralogistics

Condition: used, Year of construction: 2010, Used machine Nlodpow I H Rkjfx Akujb Year of manufacture 2010 With joining unit and corner rounding unit Control panel with LCD display and keypad Joining unit with 2 counter-rotating diamond cutters With edge feeder for roll and strip material With glue roller and glue unit With pre-trimming from the roll With pressure unit With trimming unit with pulling trimming cut With flush and radius trimming unit Corner rounding unit for front edges Manual unit adjustment Edge thickness 0.4-5 mm Workpiece height 8-60 mm Min. workpiece width 70 mm Min. workpiece length 140 mm Feed speed 11 m/min With radius scraper unit With flat scraper With polishing unit Extendable workpiece support Extraction connection 120 + 2 x 80 mm Weight approx. 990 kg L x W x H 4550 x 1550 x 1100 mm Availability: Short-term Storage location: Flörsheim

Condition: reconditioned (used), Year of construction: 2010, Voltage 400V 3~ 50Hz 7.22kW Control panel with LCD display and keypad Nodpoyf I T Uefx Akuslb Jointing unit with 2 counter-rotating diamond cutters Corner rounding unit for edge faces Manual unit adjustment Edge thickness 0.4-5.0 mm (optionally 8 mm) Workpiece height 8-60mm Feed speed 11 m/min 3 free slots for finishing units Edge feed for coil and strip material Scraper knife

Condition: new, Indramat TRK6-4U-380 / 100-G1 / 551 Pulse-thyroid control amplifier SN:219444-004991, unused, 100% functional, scope of delivery as per photos Nsdetyr A Aspfx Akuelb

Condition: ready for operation (used), Bosch QUVF 132S/4A-21 380/3667225-1 servo motor SN 1070916431, the motor was overhauled by the manufacturer, ATTENTION: Please enquire for charges for packing and transport separately! ATTENTION: Please enquire for charges for packing and transport separately! Nlsdpfsi D E Rqox Akuob

Condition: ready for operation (used), AEG Minisemi 380/50 + GK + NCA 029.037 140, used, normal signs of use, 100% functional Nodpfx Akji D Tuxouolb

Condition: ready for operation (used), Fanuc A05B-2453-B250 control SN E05506713 R-J3IB 380-415 / 440-500VAC, used, heavy signs of wear, 100% functional, scope of delivery as per photos ATTENTION: Please enquire for charges for packing and transport separately! ATTENTION: Please enquire for charges for packing and transport separately! Nodpfx Akjrz Dg Djuslb

Condition: ready for operation (used), Indramat TVM 2.4W1/220/380 Power Supply MNR: R911251872 SN:254874-14844, professionally fully overhauled and tested with 12 months warranty, 100% functional. Scope of delivery as per photos. The agreed sales discounts do not apply to this item. Please request the price separately! Nlsdpfx Aex Ety Uekusb

Condition: used, Year of construction: 2010, functionality: fully functional, – Very good condition – Year of manufacture: 2010 – Operating and maintenance documentation (DTR) available TECHNICAL PARAMETERS: Nedpfx Asw H Rzxjkuelb – Edge thickness min. - max.: 0.4 – 3.0 mm – Workpiece thickness min. - max.: 10 – 45 mm – Saw trimming unit – Milling unit for trimming excess edge tape flush or with a profile – Designed to remove excess edge tape at the top and bottom edges of the panel – Flush milling – Milling of the edge tape at an angle or radius in a single work cycle – Edge overhang milling: Ø 70 mm, Z 6, a=15°, R=2 mm – INSPECTIONS CARRIED OUT BY FELDER SERVICE – COMPACT DIMENSIONS – PRECISE AND VERY EASY TO USE – Table dimensions: 2000 x 300 mm – Air supply requirement: 6 Bar – Power supply: 400 V – Power: 3.2 kW – Glue application roller and glue tank – Grooved glue application roller ensures uniform glue coverage on the edge of the workpiece – Feed speed: 9 m/min – Overall dimensions (L/W/H): 2000 x 1260 x 650 mm – Net weight: 360 kg

Condition: reconditioned (used), Year of construction: 2010, functionality: fully functional, Motor 7.35 kW 5 spindle speeds 3500-10000 rpm Milling spindle tilting 0-45° Sliding table length 1300 mm Electric height and tilt adjustment Electrically adjustable milling fence Milling fence completely foldable Nsdpfx Aoxbq Ulskuslb Max. tool diameter 250 mm Fence jaws aluminium 550 mm Centrex milling guard Weight approx. 700 kg

Condition: new, machine/vehicle number: 0fe2184cda24503447c582a1e, empty load weight: 3 kg, maximum load weight: 34 kg, overall weight: 38 kg, axle configuration: 3 axles, tire size: 385/55 r 22,5, Further information Chassis semi-trailer container Fine-grained steel welded construction, saddle plate with replaceable 2 kingpins Container mounts:1 x 40 feet with gooseneck tunnel The transportation of filled tank containers is excluded. Without rear height adjustment and without folding center supports, no transport of containers without tunnel possible. Container guide front plug-in 24 t. 2-speed support winch, single-sided operation, with straight lower section, without thrust compensation Wheel chocks with holder Aluminium side bumper Galvanized steel underride guard Half-shell mudguards with anti-spray flaps according to EG Impact protection at the rear Axles+suspension SAF disc brake axles with 430 mm disc diameter Axle/chassis laser-measured Reduction in tire wear and fuel consumption Axle spacing offset mm (combined transport) up to 44 tons gross train weight Air suspension 1st axle automatic lift axle, including forced lowering and starting aid, actuation of 3x brakes (starting aid is functional up to an axle load excess of 30% and up to a speed of max. 25 km/h) Brake system 2-line compressed air brake systemColor-coded cable routing for easy servicing. Spring-loaded parking brake Nlsdpfx Aoi Ri Ayskujb 2 interchangeable clutch heads at the front, without connecting line EBS, electronic braking system with EBS socket at the front, without connecting cable Attention: The trailer may only be towed by towing vehicles that guarantee the effectiveness of the ABS! with lifting & lowering valve Vehicle stability system Axle load detection via EBS-Canbus signal, for indication via display in the cab, truck must be prepared accordingly, no truck installation (no calibrated scales) Wheels and tires 385/55 R22.5 make of the manufacturer's choice Steel rims, factory silver Electrical system 24 volt, multi-chamber lights, rear and brake lights in LED, amber LED lighting on the side (Note! with certain towing vehicles, misdiagnosis may occur although the function is given) 2 white position lights at the front 2 white/red rear lane departure lights 1 x 15-pin socket at the front, without connecting cable LED work lights on both sides (switched via reversing light) Additional LED work light(s) at the rear, switched via reversing light Operating instructions The specified total weight is technically possible; depending on the load, the total weight may not be reached if the permissible axle/support and fifth-wheel loads are observed. (Poor driving and trailing behavior possible due to incorrect load distribution) Special approval required if the overall length of the train exceeds 16,500 mm. Attention: Transport of filled tank containers is excluded! Country of approval / plates Germany with Dekra approval and expert opinion (according to §13 EG - FGV) Prepared for single-line license plate holder Warning sign according to ECE - 70 Contour markings with reflective strips to ECE R 048, white at the sides and red at the rear Paint finish Frame DB 7350 nova gray10-year warranty against rusting through Support legs coated black Without pallet box Paint Attention: Archive pictures!

Condition: new, machine/vehicle number: 3703d600260244d5f159f51e4, empty load weight: 4 kg, maximum load weight: 33 kg, overall weight: 38 kg, axle configuration: 3 axles, tire size: 385/55 r22.5, Further information Chassis Saddle Container Welded fine-grained steel construction, saddle plate with interchangeable 2 kingpins and 2 kingpin positions Container mounts: Incl. Rear extension retracted: 1 x 20 feet flush with the rear, attention low fifth wheel load Rear extension extended 1st stage: 1 x 30 feet, 2 x 20 feet, 1 x 40 feet with gooseneck tunnel Rear extension extended 2nd stage: 1 x 45 feet with gooseneck tunnel and overloaded to the rear without rear height adjustment and without folding center supports, no transport of containers without tunnel possible. Plug-in adapter for front locking, for locking the containers without tunnel from below, with holder when not in use Rear extension mounted on rollers, with hand crank 24 t. 2-speed support winch, single-sided operation, with straight lower section, without thrust compensation 2 wheel chocks with holder Aluminium side bumper Galvanized steel underride guard Extendable underride guard for 45 foot containers Half-shell mudguards Incl. with anti-spray flaps according to EG Impact protection at the rear Axles + suspension SAF disc brake axles with 430 mm disc diameter Axle/chassis laser-measured Reduction in tire wear and fuel consumption Axle spacing offset mm (combined transport) up to 44 tons gross train weight Air suspension 1st axle automatic lift axle, including forced lowering and starting aid, actuation of 3x brakes (starting aid is functional up to an axle load excess of 30% and up to a speed of max. 25 km/h) Brake system 2-line compressed air brake system Colored line routing for easy service. 200 spring-loaded parking brake 2 interchangeable clutch heads at the front, without connecting line EBS, electronic braking system with EBS socket at the front, without connecting cable Attention: The trailer may only be towed by towing vehicles that guarantee the effectiveness of the ABS! with lifting & lowering valve Vehicle stability system Axle load detection via EBS-Canbus signal, for indication via display in the cab, truck must be prepared accordingly, no truck installation (no calibrated scales) Wheels and tires 385/55 R22.5 make of the manufacturer's choice Steel rims, factory silver Electrical system 24 volt, multi-chamber lights, rear and brake lights in LED, amber LED lighting on the side (Note! with certain towing vehicles, misdiagnoses can occur even though the function is is given) 2 white position lights at the front 2 white/red rear lane departure lights 2 x 7-pin interchangeable sockets at the front, without connecting cable Operating instructions Attention: Transport of filled tank containers is excluded! When transporting 45 containers with a short tunnel, with or without front extension, the permissible system length from the kingpin to the rear edge of the vehicle and the total train length of 16500 mm is exceeded! The underride guard must be extended manually! A special permit in accordance with § 70 StVZo is required! Country of registration / plates Germany with Dekra approval and expert opinion (according to §13 EG - FGV) 24/7 service hotline Prepared for single-line license plate holder 390 Contour marking with reflective strips in accordance with ECE R 048, white on the sides and red on the rear Paintwork Hot-dip galvanized frame incl. passivation 15-year warranty against rusting through Support legs coated black Njdpfxoi Ri Eqe Akuslb Attention: Archive pictures!

Condition: new, machine/vehicle number: db8c7ca763dc8d3b3d034dfa4, empty load weight: 3 kg, maximum load weight: 34 kg, overall weight: 38 kg, axle configuration: 3 axles, tire size: 385/55 r22.5, Further information Chassis semi-trailer container Welded fine-grained steel construction, saddle plate with replaceable 2 kingpins Container mounts:1 x 40 feet with gooseneck tunnelFront extension extended: 1 x 45 feet with long gooseneck tunnel and overloaded to the rear The transportation of filled tank containers is excluded. Without rear height adjustment and without folding center supports, no transport of containers without tunnel possible. 2 container guides, incl. connection plate for electrical, air and brake connections (connections positioned upwards) Front extension mounted on rollers, manually extendable (for 45 containers with long tunnel) Nlodoi Riwmopfx Akueb 24 t. 2-speed support winch, single-side operation, with straight lower section, without thrust compensation Wheel chocks with holder Aluminium side bumper Galvanized steel underride guard Extendable underride guard for 45 foot containers Half-shell mudguards with anti-spray flaps according to EG Impact protection at the rear Axles+suspension SAF disc brake axles with 430 mm disc diameter Axle/chassis laser-measured Reduction in tire wear and fuel consumption Axle spacing offset mm (combined transport) up to 44 tons gross train weight Air suspension Brake system 2-line compressed air brake systemColor-coded cable routing for easy servicing. Spring-loaded parking brake 2 swap-proof coupling heads at the front, without connecting line EBS, electronic braking system with EBS socket at the front, without connecting cable Test connection for brake cylinder pressure on the EBS module laid to the outside. Attention: The trailer may only be towed by towing vehicles that guarantee the effectiveness of the ABS! with lifting & lowering valve Vehicle - driving stability system Axle load detection via EBS-Canbus signal, for indication via display in the driver's cab, truck must be prepared accordingly, no truck installation (no calibrated scales) Wheels and tires 385/55 R22.5 make of the manufacturer's choice Steel rims, factory silver Electrical system 24 volt, multi-chamber lights, rear and brake lights in LED, amber LED lighting on the side (note! with certain towing vehicles, misdiagnosis can occur although the function is given) 2 white position lights at the front 2 white/red rear lane departure lights 2 x 7-pin interchangeable sockets at the front, without connecting cable Operating instructions Attention: Transport of filled tank containers is excluded! When transporting 45 containers with a short tunnel, with or without front extension, the permissible system length from the kingpin to the rear edge of the vehicle and the total train length of 16500 mm is exceeded! The underride guard must be extended manually! A special permit in accordance with § 70 StVZo is required! Country of registration / plates Germany Test approval according to EG 2007/46 24/7 service hotline Prepared for single-line license plate holder Warning sign according to ECE - 70 Contour markings with reflective strips to ECE R 048, white at the sides and red at the rear Paint finish Frame DB 7350 nova gray10-year warranty against rusting through Support legs coated black Without pallet box Paint Attention: Archive pictures!

Condition: new, machine/vehicle number: e4d182b7a074e7b83e540ed58, empty load weight: 5 kg, maximum load weight: 32 kg, overall weight: 38 kg, axle configuration: 3 axles, tire size: 385/55 r22.5, Further information Chassis Saddle Container Welded fine-grained steel construction, saddle plate with interchangeable 2 kingpins and 2 kingpin positions Container mountings: Rear extension retracted: 1 x 20 feet flush with the rear, low fifth wheel load Rear extension extended 1st stage: 1 x 30 feet, 2 x 20 feet, 1 x 40 feet with gooseneck tunnel Rear extension extended 2nd stage: 1 x 45 feet with short gooseneck tunnel and overloaded to the rear Rear extension extended 2nd stage + front extension 1st stage: 1 x 45 feet with long gooseneck tunnel and chamfered corners With rear height adjustment and folding center supports for containers without tunnel Container guide at the front Plug-in and removable (electrical, air and brake connections at the front of the front cross member) Plug-in adapter for front locking, for locking the containers without tunnel from below, with holder when not in use Front extension mounted on rollers, can be pulled out manually (for 45 containers with long tunnel) Rear extension mounted on rollers, with hand crank 24 t. 2-speed support winch, single-sided operation, with straight lower section, without thrust compensation 2 wheel chocks with holder Nledpfxji Rizue Akuob Aluminium side bumper Galvanized steel underride guard Extendable underride guard for 45 foot containers Half-shell mudguards with anti-spray flaps according to EG Impact protection at the rear Axles + suspension SAF disc brake axles with 430 mm disc diameter Axle/chassis laser-measured Reduction in tire wear and fuel consumption Axle spacing offset mm (combined transport) up to 44 tons gross train weight Air suspension 1st axle automatic lift axle, including forced lowering and starting aid, actuation of 3x brakes (starting aid is functional up to an axle load excess of 30% and up to a speed of max. 25 km/h) Brake system 2-line compressed air brake systemColor-coded cable routing for easy servicing. Spring-loaded parking brake 2 interchangeable clutch heads at the front, without connecting line EBS, electronic braking system with EBS socket at the front, without connecting cable Attention: The trailer may only be towed by towing vehicles that guarantee the effectiveness of the ABS! with lift & lower valve + auto-reset function Vehicle stability system Axle load detection via EBS-Canbus signal, for indication via display in driver's cab, truck must be prepared accordingly, no truck installation (no calibrated scales) Wheels and tires 385/55 R22.5 make of the manufacturer's choice Steel rims, factory silver Electrical system 24 volt, multi-chamber lights, amber LED lighting at the sides 2 white position lights at the front 2 white/red rear lane departure lights 2 x 7-pin interchangeable sockets at the front, without connecting cable Operating instructions The specified total weight is technically possible; depending on the load, the total weight may not be reached if the permissible axle/support and fifth-wheel loads are observed. Special approval required if the total train length exceeds 16,500 mm. When transporting 45 containers with a short tunnel, with or without front extension, the permissible system length from the kingpin to the rear edge of the vehicle and the overall train length of 16,500 mm is exceeded! The underride guard must be extended manually! A special permit in accordance with § 70 StVZo is required! Approval / plates Germany Test approval according to EG 2007/46 24/7 service hotline Prepared for single-line license plate holder Warning sign

Condition: used, Demag Ergocontrol, 4 MB- for NC4 control system - removed from Demag ET 6 system - removed from running machine - fully functionalmanufacturer: Demag Nlsdpfjrr Ehmex Akueb spare part no.: 7If the spare part is traded in exchange, a partial credit note will be issued after receipt of the defective part and inspection by the manufacturer. We reserve the right to refuse a credit note due to the condition or age of the returned part. The defective part must be in a repairable condition, the credit note will be issued after feedback from the manufacturer. Dition: gebraucht

Year of construction: 1994, condition: reconditioned (used), Brick weight: 250g. Dimensions of the brick are: 100 x 75 x 35 [mm] (length x width x height). Capacity is up to 75 bricks per minute. The machine was fully reconditioned. Taken apart and assembled back with all used parts reconditioned or changed. It is equipped with an inverter on the main drive (smooth speed adjustment), aluminium hopper (stainless steel hopper also available) and paper centring mechanism (layout of the paper is centred on the brick). Nodpjfm T A Iofx Akuolb If It is possible to fit a different format on the machine from 50g to 500g.

Condition: used, mileage: 211,033 km, power: 331 kW (450.03 HP), first registration: 03/2016, fuel type: diesel, overall weight: 32,000 kg, axle configuration: > 3 axles, next inspection (TÜV): 04/2027, brakes: retarder, color: orange, gearing type: automatic, emission class: euro6, loading space volume: 14 m³, loading space length: 5,600 mm, loading space width: 2,420 mm, loading space height: 1,050 mm, Equipment: ABS, air conditioning, navigation system, parking heater, * Sun visor * ABS * TCS Traction Control System * Radio * Navigation system * On-board computer * Rear view camera * Cruise control * Air horns * Electric windows * Electrically adjustable mirrors * Mirror heating * Central locking * Fog lights * Sunroof * Rear window * Driver's comfort seat * Seat heating * Longitudinal and transverse locks * AP axles * Steel bumper * All-round orange warning light * Exhaust behind the cab * Foldable under-ride protection * Auxiliary heater * Hill start assist * Cooler box * Towing hitch * 12-speed * Suspension: leaf spring * Payload: 18060 Nlodpfx Aey Tq Tujkuob * Continuous brake: retarder ----Body: Dautel 3-sided pallet tipper body, type DK 4 (rated load 24,500 kg), steel side panel on the left with side gate automation, elevated steel front panel with excavator protection, steel rear panel, chute at the rear, steel floor, lashing eyes, aluminum side panel on the right. For sale to commercial businesses only. IN CASE OF EXPORT, ONLY THE NET PRICE IS PAYABLE!!!!! ALL INFORMATION WITHOUT GUARANTEE, INCLUDING EQUIPMENT AND ACCESSORIES. Our general terms and conditions (see imprint) form the basis for all purchase agreements, invoices, pro forma invoices, orders and sales negotiations.

Condition: used, mileage: 211,033 km, power: 331 kW (450.03 HP), first registration: 03/2016, fuel type: diesel, overall weight: 32,000 kg, axle configuration: > 3 axles, next inspection (TÜV): 04/2027, brakes: retarder, color: orange, gearing type: automatic, emission class: euro6, loading space volume: 14 m³, loading space length: 5,600 mm, loading space width: 2,420 mm, loading space height: 1,050 mm, Equipment: ABS, air conditioning, navigation system, parking heater, * Sun visor * ABS * TCS Traction Control System * Radio * Navigation system * On-board computer * Rear view camera * Cruise control * Air horns * Electric windows * Electrically adjustable mirrors * Mirror heating * Central locking * Fog lights * Sunroof * Rear window * Driver's comfort seat * Seat heating Nlsdpfx Aoy Tq Tzjkueb * Longitudinal and transverse locks * AP axles * Steel bumper * All-round orange warning light * Exhaust behind the cab * Foldable underrun protection * Auxiliary heater * Hill start assist * Cool box * Towing hitch * 12-speed * Suspension: leaf spring * Payload: 18060 * Continuous brake: retarder ----Body: Dautel 3-sided pallet tipping body, type DK 4 (rated load 24,500 kg), steel side board on the left with boardmatic system, elevated steel front wall with excavator protection, steel rear wall, hopper at the rear, steel floor, lashing points, aluminum side board on the right. Sales only to commercial businesses. FOR EXPORT, ONLY THE NET PRICE IS PAYABLE!!!!! ALL INFORMATION WITHOUT GUARANTEE. INCLUDING EQUIPMENT + ACCESSORIES. Our general terms and conditions (see imprint) form the basis for all purchase agreements, invoices, proforma invoices, orders and sales negotiations.

Condition: excellent (used), Year of construction: 2008, For sale is a fine Felder tilting spindle moulder, model Profil 45/07. Machine is available immediately. About the machine: Nodpfx Akjy Spftouslb Year of manufacture: 2008 Tilting spindle Electric height adjustment Right/left rotation Sturdy cast iron table Smooth and precise operation The machine runs perfectly and is in sound technical condition.

Condition: used, mileage: 61,432 km, power: 120 kW (163.15 HP), fuel type: diesel, gearing type: automatic, overall weight: 3,500 kg, first registration: 06/2021, loading space length: 3,496 mm, loading space width: 1,773 mm, loading space height: 1,608 mm, loading space volume: 10 m³, emission class: euro6, color: white, number of seats: 4, Year of construction: 2021, total length: 5,932 mm, total width: 2,020 mm, total height: 2,496 mm, Equipment: ABS, air conditioning, all wheel drive, central locking, electronic stability program (ESP), navigation system, parking heater, soot filter, - Internal No. 55.64 - Dimensions, passenger/cargo area: Length to driver's seat 3,479 mm x Length to partition 2,186 mm x Width 1,778 mm x Height 1,608 mm - Windows in the cargo area or rear doors can be installed on request for 300 ¤ each - All-wheel drive, switchable - Transmission: 7G-TRONIC PLUS automatic - Air conditioning: regulated Tempmatic system - Package: Parking package with reversing camera - Navigation with voice control - MBUX multimedia system with 7-inch touchscreen, including Apple CarPlay and Android Auto - Cruise control - Auxiliary heater - Thermal insulation, driver's cabin - Thermal insulation, cargo area - Electric auxiliary heater - WET WIPER SYSTEM - Seat heating, passenger side - Seat heating, driver side - Comfort passenger seat - Comfort driver's seat - Seat: Lumbar support, passenger side, electric - Seat: Lumbar support, driver side, electric - Cargo area lining up to the grab handle - Rear door, two-wing opening, side opening - Tires: M + S - Rain sensor - Radio: Digital radio DAB - Package: Acoustics - Navigation: Live Traffic enabled - Multifunction steering wheel - Anti-theft alarm, intrusion detection - Tinted glass in the rear, black glass - Rails for roof rack - Step on the rear door - Battery: AGM battery 12 V / 92 Ah - Turn signals, side front - Digital operating manual - Main tank 93 liters - Airbag, passenger side - Exterior mirrors without turn signals - Window, front left in cargo area/sliding door - Window, front right in cargo area/sliding door - Floor mats, all-weather - Generator 14 V/180 A - Wooden floor in the cargo area - Terminal block for electrical connections - Comfort roof control unit - Marker lights, side - Wheel arch lining - Tires: Tire brand Continental - Mud flaps, rear - Mud flaps, front Njdpfxsy Tdips Akujlb - Armrest, driver's and passenger's door - Pre-wiring for electrical system, parameterized special module - Omission of parking lights - Heat-absorbing glass with band filter on front windscreen - KEYLESS-Start - Seats: Passenger seat adjustable - Central locking with remote control - Seats: Armrest, driver's seat - Retrofitting trailer coupling possible - Chassis number: W1V9076331P341982 1st owner, no re-import (German vehicle), not a rental car, top condition, non-smoking vehicle, original Mercedes service booklet, trade-in of old vehicle possible, workshop inspected including warranty, DEKRA used car condition report possible on request. We can deliver the vehicle, purchased locally, to your home address for a price of 0.50 ¤ / KM. The minimum cost is 150.00 ¤.