Used Fronius Tps 4000 Cmt Transpulssynergic for sale (2,734)

Year of construction: 2017, condition: like new (used), Set for robotic laser welding Scope of supply: 1 x IPG YLS-4000 4KW output laser (2017). Fiber core 300 microns and 30 meter length, LCA LCA. Optical coupler inside. Profinet interface. Power ON work time : 32832 hours Bjdpjrfucqjfx Ahmsln 1 x IPG CHILLER.(2017). 1 x HIGHYAG BIMO LASER WELDING HEAD with air knife. Machine can be inspected. Very good condition. Connected, can be tested. Shipping to EU countries is our responsibility and the shipping cost is free.

Condition: used, Year 1989 Center height on the bed: 225 - 250 mm Distance between centers: 1500 mm Maximum turning diameter in the gap: 660 - 710 mm Maximum turning diameter on the bed: 455 - 505 mm Maximum turning diameter on the carriage: 270 - 290 mm Blsdpfx Ahsz Dwl Tomen Fixed steady rest bore diameter: 200 mm Traveling steady rest bore diameter: 130 mm Bed width: 330 mm Gap width: 250 mm Gap width at the carriage: 160 mm Maximum spindle diameter: 140 mm Spindle bore: 105 mm Reduction sleeve for spindle / Morse taper: No. 5 Tailstock Morse taper: No. 5 Speeds and Feeds • Spindle speeds: No. 16 • Speed values: from 23 to 1000 rpm (or 35 to 1500 rpm). • Longitudinal feeds: 0.06 - 0.84 mm/rev. • Transverse feeds: 0.03 - 0.42 mm/rev. Threads • Metric pitches: 0.5 - 28 mm. • Module pitches: 0.25 - 14. • Whitworth: 2 - 112 threads/inch. Motor • Standard power: 7.5 HP. Machine comes with operating and maintenance manual. All technical data provided is indicative and may be subject to change without prior notice; therefore, it should not be considered binding.

Condition: excellent (used), The DAGE Series 4000 Bond Tester is a professional device designed for performing Bond Pull and Die Shear tests in the semiconductor and electronics industries. This device is used in quality control laboratories, research and development departments, and during the production of microelectronic components. This unit is equipped with a precision positioning table, joystick controls, a keypad panel, and work lighting. The set also includes the original PCI control card (Baldor NextMove PCI-2 Motion Control Card) and additional electronic components visible in the photos, which are a valuable addition to the set. Bjdezma Tbjpfx Ahmeln Technical data: Manufacturer: DAGE (Nordson DAGE) Model: DAGE Series 4000 Bond Tester Year of manufacture: 2010 Power supply: 110 / 230 V AC, 1-phase Frequency: 50/60 Hz Power: 250 VA Control: joysticks and keypad Precision XY positioning table Required compressed air: 4 bar (oil-free) Vacuum connection Excellent visual condition. The set being sold is consistent with the presented photos and includes all visible components, including the additional PCI control card.

Condition: used, total length: 2,650 mm, total width: 1,150 mm, total height: 1,650 mm, Colour: Green Empty weight: 2.500 kg - Documentation available: Yes - CE certificate present: No - Drive system: Conventional - Centre height [mm]: 225 - Swing over bed [mm]: 550 - Carriage turning diameter [mm]: 1600 - Distance between centres [mm]: 1050 - Bed width [mm]: 340 - Spindle bore [mm]: 52 - Min. spindle speed [rpm]: 46 - Max. spindle speed [rpm]: 1000 - Options: Digital readout, Four-jaw chuck, Three-jaw chuck, Quick-change tool post, Fixed steady, Removable bed - Type of digital readout: Heidenhain - Transport dimensions: 2650mm x 1150mm x 1650mm (l x w x h) - Transport weight [kg]: 2500kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Blsdpfozzlg Aex Ahmsn Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: ready for operation (used), Year of construction: 2021, operating hours: 1,000 h, functionality: fully functional, machine/vehicle number: 9419257, total height: 2,500 mm, total length: 4,500 mm, total width: 2,200 mm, volume flow: 5,000 m³/h, type of input current: AC, overall weight: 600 kg, inner dimension height: 2,400 mm, inner dimension length: 3,800 mm, suction capacity: 4,500 m³/h, inner dimension width: 2,100 mm, input voltage: 400 V, space requirement height: 2,600 mm, space requirement length: 5,000 mm, Equipment: cabin, lighting, Selling a modular Straumann painting booth with few operating hours. Straumann painting booth (year of manufacture 2021) – in good condition Bljdpfxez D Ifqe Ahmen Selling a modular Straumann painting booth with few operating hours. Equipment & Details: Dimensions: Filter area 1.50 × 1.50 m, with extension and booth Work area approx. 2.10 x 2.40 x 3.50 m Technology: Extraction wall, fan with frequency converter, lighting Filtration: 3-stage filter system and 1+1 double door with filter for the afterflow air Construction: SVZ sheet metal panels, screwed together, smooth interior, with 1+1 double door Condition: Good, well-maintained, easily disassembled, as shown in the pictures. Design and details as shown in the pictures. Disassembly by the buyer; exhaust pipes can be taken over. Please contact me if you have any questions or would like to arrange a viewing. => Disassembly and removal by the buyer => Free of charge, including painting equipment / pressure tank with spray gun, as shown in the pictures => All information without guarantee. Subject to prior sale. Used system: Sale excluding any warranty or guarantee.

Condition: not inspected (used), We are selling a used Fronius distributor, Interbus 2MB Rugged Line. This is a MIG-MAG distribution unit that we no longer need because we have modified our equipment. Article number 4,045,885. Sold without warranty or the possibility of return. Bsdpfx Ahozvc Tiemsln

Condition: excellent (used), Year of construction: 2019, functionality: fully functional, operating pressure: 280 bar, Rubber injection molding machine in very good condition, manufactured in 2020. Detailed Technical Data: Clamping Unit: Clamping force: 4000 kN Min. mold height: 100 mm Mold opening stroke: 750 mm Max. daylight between heating plates: 850 mm Design: vertical Closing direction: from the top Heating Platens: Platen size: 800 x 806 mm Heating power: 2 x 14 kW Injection Unit: Shot volume: 4000 cm³ Max. injection pressure: 2000 bar Screw diameter: 60 mm Screw length: 10 D Max. screw speed: 0-180 rpm Injection direction: from the bottom Bjdsz E N Ayepfx Ahmoln Hydraulic System: Variable pump and proportional valves for pressure and flow Hydraulic manifold for stroke control with shift valves Reservoir capacity: 250 l Operating pressure: 280 bar Electrical Equipment: The design of the electrical equipment complies with DIN/VDE standards 0100, 0113 Electrical cabinet protection IP 54 according to DIN 40050 Connected voltage: 3 x 400 V + N + PE Frequency: 50 Hz Connected load: 77 kW Motor capacity: 45 kW Rated heating power: 2 x 14 kW Control voltage: 24 V DC Permissible temperatures: 0 - 40 °C

Year of construction: 2020, condition: ready for operation (used), functionality: fully functional, WMW Niles, Czech Republic Made, CNC(Siemens Controls, Retrofitted in 2020) Floor Type Heavy Duty Lathe ,With heavy Duty Tail Stock, Steady Rest, Rollers, and with 6000 MM X 4000 MM Floor plates Bledpfx Ahozww R Somsn

Year of construction: 2015, condition: excellent (used), functionality: fully functional, Technical specifications for the bale opening line for RDF, MSW, paper, and cardboard: Manufacturer: Cross Wrap Oy Ltd., Siilinjärvi, Finland Type: BO 4000 Year of construction: 2015 Number of bales opened: 674 Operating time: only 3 days, exclusively during the initial commissioning of the entire system upon new installation Opening time: approximately 45 seconds per bale Bale dimensions (W x H x L): 1100 x 1100 x 1400 – 1900 mm Max. bale weight: 2,000 kg System conveying height: 1,400 mm Max. system conveying width: 1,200 mm Material to be opened: RDF/MSW System availability: 98% Bljdpfxjzp H R Ej Ahmsn Noise level of the bale opening line: 85 dB(A) Total connected load: 37 kW Rated current: 125 A Control panel: SIEMENS SIMATIC HMI Touch Controller: SIEMENS S7 ET200S Installation dimensions: 8,463 x 2,890 x 3,960 mm (L x W x H) Scope of supply: Infeed conveyor: 3,500 x 1,200 x 1,400 mm Feed conveyor to the opener: 1,500 x 1,200 x 1,400 mm Bale opener (gripper with knife) Special equipment: Oil heating in the hydraulic oil tank Control cabinet heating Oil cooler for hydraulic unit Explanation for the short operating time: The entire Cross Wrap bale opening line, type BO 4000, was installed in 2015 at a municipal waste incineration plant. The reason for installing the system was to ensure that municipal waste could continue to be accepted, compressed, wrapped, and stored even during an operational disruption or maintenance of the incineration plant until the disruption was resolved. Subsequently, all the bales were to be opened again, and the waste fed into the normal incineration process. This worst-case scenario never occurred. The system was installed, commissioned, and then never used in normal operation. Only during the commissioning and initial operation of the entire system in 2015 were 674 bales opened over three days. The system is in very good condition and is immediately ready for operation. Due to restructuring measures in the incineration plant, the installation space of the bale opener was needed. This means that the complete line is now available for sale. Brief description of the bale opening process: The compressed bales are placed on the infeed conveyor from the side or from the rear using a forklift. To open the bales, they must be positioned horizontally to the conveyor with the wire or twine binding; otherwise, the bales must be rotated by 90° beforehand. The opening conveyor brings one bale at a time in front of the cutting unit. The grippers hold the wires or the twine binding. The rotating knife cuts the bale lengthwise. After that, the gripper returns to its starting position. The opened bale is now conveyed via the conveyor to the discharge chute and then falls onto the subsequent conveyor system. Remarks: New price of the complete system: €296,000. The documentation (operating manual, CE declaration, electrical/hydraulic circuit diagram) is complete. The system has been dismantled into transportable units, stored, and is available for inspection and loading in the short term. We assume no liability for the technical data or any potential errors.

Condition: used, Year of construction: 2012, functionality: fully functional, machine/vehicle number: 23423676, Equipment: type plate available, Fronius VarioSynergic 3400 G/W/E welding machine 6 pieces available, the price is per piece. Bedpfoym Rq Sex Ahmsln In working condition. The data can be seen from the nameplate. Purchase is only possible for legal entities.

Condition: excellent (used), Year of construction: 2018, functionality: fully functional, Control system: Siemens 840D-SL Tool positions: 160 Tool holder: HSK 63 Spindle speed: 10,000 rpm / 242 Nm Pallet size: 630 x 500 mm Number of pallets: 2 X-axis: 800 mm Y-axis: 800 mm Z-axis: 1000 mm Bljdpfoz E Hxlex Ahmjn Table load capacity: max. 1000 kg

Condition: ready for operation (used), Year of construction: 2012, functionality: fully functional, machine/vehicle number: 48390-115-3078, We are offering this ready-to-use Metso M&J 4000 M pre-crusher, manufactured in 2012. Manufacturer: Metso Model: M&J 4000 M Serial number: 48390-116-3078 Year of manufacture: 2012 Blodpfszm Eiuex Ahmsn EC type approval: e1*97/68HA*2004/26*0346*00 Machine no.: 14 of 50 Engine ID: 942.992-C-0837-242 If you have any questions or require further information, please do not hesitate to contact us.

Condition: like new (used), Year of construction: 2018, Set for robotic plasma welding .( Robot not included - without robot ) Shipping to EU countries is our responsibility and the shipping cost is free. Bledpfxerfuc Hs Ahmsn

Condition: repair required (used), Condition unknown; the machine was purchased at an auction along with other equipment that we use. We do not need this particular device. Blodpfx Aoz Hi H Ushmjn

Condition: used, Year of construction: 2019, functionality: unexamined, machine/vehicle number: S40-0051, type of input current: three-phase, input voltage: 400 V, working width: 3,210 mm, cutting width (max.): 3,210 mm, laser power: 400 W, type of cooling: water, laser type: CO₂ laser, laser source model: Firestar f400, Equipment: fume extraction, The system consists of: Trotec SP4000 C / New Textile – 400 W CO₂ laser cutting system Sigma C13 – Cooling unit for the laser system Blsdpfx Ahjzuyg Remjn Aigner VENT Set SP 3000 – Extraction and ventilation unit ASCO BV – Unwinding and material feed system for roll goods JQS Querimat QSV – Cross-cutting unit with a cutting width of 2,500 mm Firestar – CO₂ laser source The system is currently located in Worms and was used in ongoing production until the plant was shut down. Since the machine is currently not connected to the power grid, a current functional test cannot be performed at this time. An on-site inspection is possible by arrangement. The system is offered in its current condition and with the components shown in the pictures.

Condition: like new (used), Year of construction: 2015, functionality: fully functional, We offer this as new MHM SPM 4000 12Z08 70x100 screen printing machine, year of manufacture 2015. Blsdpfx Ahoy I Iz Esmsn If you have any questions or need more information, feel free to send us a message or give us a call.

Condition: used, Year of construction: 1995, machine/vehicle number: 20373, functionality: unexamined, power: 4 kW (5.44 HP), input voltage: 400 V, input frequency: 50 Hz, type of input current: three-phase, cutting height (max.): 90 mm, saw blade diameter: 315 mm, tilt adjustment saw blade: 45 °, height adjustment type: mechanical, saw blade bore: 30 mm, rotational speed (max.): 4,000 rpm, rotational speed (min.): 4,000 rpm, overall weight: 127 kg, table height: 850 mm, Equipment: CE marking, saw blade guard, Scheppach table saw TS 4000, Blodpfx Ahey N Sfqemen max. cutting height 90 mm, at 45° max. 60 mm, max. saw blade diameter 315 mm, adjustable from 0° to 45°, motor 4 kW (5.4 hp), sliding table 2,000 mm, lifting and traversing mechanism, foldable table extension, miter gauge, SUVA saw blade guard, GS-certified for wood dust with CE marking, ex works, as inspected at the Seevetal location, excluding transport, subject to prior sale.

Condition: used, Year of construction: 2016, Overview This Scaligera ULISSE 4000 is a sleeve labeling machine for cans, built in 2016 by Scaligera Packaging in Italy. It applies sleeves to sleek and standard cans at up to 4,000 cans per hour and comes with its matching Scaligera steam shrink tunnel from the same year. The line ran carbonated soft drinks in cans and was in production until early September 2023. The machine runs left to right. Sleeves are cut from the reel, opened and placed over the can in the sleever; the steam tunnel then shrinks them tight onto the can body. Technical data - Manufacturer: Scaligera - Model: ULISSE 4000 - Year of manufacture: 2016 - Machine type: sleeve labeler with steam shrink tunnel - Output: up to 4,000 cans/h - Containers: sleek and standard cans - Machine direction: left to right - Power supply: 400 V, 3-phase, 50 Hz - Connected load: 8 kW in total (sleever 2 kW, steam tunnel 6 kW) - Max. current: sleever 7 A, steam tunnel 10 A - Compressed air (sleever): 6 bar - Steam supply (tunnel): 6 bar, up to 200 kg/h - Weight: sleever approx. 850 kg, steam tunnel approx. 350 kg - CE mark on both machine plates Equipment - Scaligera ULISSE 4000 sleeve applicator with infeed screw and guarded, windowed housing - Scaligera TVP2SE steam shrink tunnel (2016) with two inspection windows and pressure gauges - Electrical control cabinet with push-button operation and signal tower Condition Blsdpfxsz H N Hhs Ahmjn Used. The machine was in production until early September 2023 and is now dismantled, so it cannot be shown in operation. Sold without warranty. Availability Immediately. Location: Belgium.

Condition: good (used), functionality: fully functional, Year of construction: 2008, machine/vehicle number: 8070850, degree of automation: automatic, actuation type: electric, laser type: fiber laser, laser source manufacturer: IPG Photonics GmbH, laser power: 4,000 W, laser wavelength: 1,070 nm, sheet thickness steel (max.): 5 mm, sheet thickness stainless steel (max.): 4 mm, sheet thickness aluminum (max.): 3 mm, sheet thickness brass (max.): 1 mm, sheet thickness copper (max.): 1 mm, overall weight: 420 kg, total length: 856 mm, total width: 806 mm, total height: 1,186 mm, Equipment: cooling unit, Technical Data Manufacturer: IPG Laser GmbH Laser Model: YLS-4000-S2-IHE Bodpfx Ajzc Hpvohmoln Serial Number (SN): 8070850 Rated Voltage: 400V AC +-10% 3P/PE Frequency: 50/60 Hz Full Load Current: 80 A Fuses: 80A / 120kA Date of Manufacture: 08.12.2008 Wiring Diagram: G25-16-70820-4 Cooler Wiring Diagram: G25-16-61012-4 Certification: CE marking Wavelength: 1070 nm Wavelength Bandwidth: approx. 1070 nm – 1080 nm Rated Output Power: 4.0 kW Laser Class: Class 4 Power Control: 10% to 100% Typical Fiber Diameter (Delivery Fiber): Mostly 100 µm (micrometers) Upon request, transport and loading can be arranged throughout Europe for an additional fee. Prices plus VAT. Inspection possible by appointment. Contact us, our team will be happy to assist you. Trade-in or exchange possible! Machine Purchase/Sale PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES, AMONG OTHERS. Gjbn N Ay Dowza Dxogoil Do you need a high-quality, but affordable, metalworking machine for your production? Or do you want to sell yours? For more information or contact options, visit our website.

Condition: excellent (used), Year of construction: 2015, functionality: fully functional, travel distance X-axis: 4,000 mm, travel distance Y-axis: 1,300 mm, travel distance Z-axis: 1,600 mm, Travel ranges: Longitudinal (X): 4000 mm Vertical (Z): 1600 mm Lateral (Y): 1300 mm Rotary table: Diameter: 1600 mm Maximum speed: 250 min⁻¹ Drive power (100% duty cycle): 53 kW Maximum transport load (positioning): 8000 kg Maximum transport load (rotation): 3000 - 8000 kg Work table: Length: 4000 mm Width: 1240 mm Height of work table: 760 mm Automatically indexing milling head: Tool interface: ISO 50, DIN 69871 AD Automatic tool clamping: Clamping force 20000 N Spindle speed range: Spindle speed: 20 - 5000 min⁻¹ Full power from 340 min⁻¹ Torque at 32 kW/S1: 900 Nm Main drive: Drive power: 43 kW Maximum rapid traverse rate: Bsdpfx Ahozi S E Ujmsln X-axis 45000 mm/min Y- and Z-axis 35000 mm/min Maximum feed force: X, Y and Z-axis 16000 N Automatic tool changer Magazine positions in M version: Maximum tool positions: SK 50 40 positions Maximum tool positions: Capto C8 20 positions Machine weight: approx. 32,100 kg Equipment: - Work table 4000 x 1240 x 760 mm with integrated rotary table Ø 1600 mm - Swiveling control panel with telescopic arm with HEIDENHAIN TNC 640 HSCI (6 axes + spindle) control, including 19" flat screen, metallic keyboard with integrated mouse and USB interface on the control panel. Processor speed 0.5 ms including HEIDENHAIN smarT.NC. - Interpolative turning with HEIDENHAIN TNC 640 HSCI consisting of CAM system, HEIDENHAIN postprocessor, software adaptation for C-axis (spindle). - Portable electronic hand-held unit HEIDENHAIN HR 520 with 5 m cable. - Automatically indexing milling head / 2 levels with 2.5° x 2.5° division and a tool clamping force of 20,000 N (H200), 32 kW / 900 Nm, tool interface ISO 50 - DIN 69871 AD. Mounting flange with Hirth gearing for adapting turning tool holders, grinding spindles or additional milling heads and a protective ring to cover the Hirth gearing; not required if H205 is selected. - Spindle drive 43 kW at 100% duty cycle via water-cooled HEIDENHAIN inline motor with direct power transmission. The motor is integrated into the milling slide. - Turning tool holder with Capto C8 interface (manual tool clamping) for turning operations incl. Hirth gearing and SK 50 interface according to DIN 69871 AD for adaptation to SORALUCE milling heads. (Semi-automatic changing with additional manual fastening by 8 x M8 screws); not required with fully automatic changing of the turning tool holder. - Pneumatically adjustable pick-up station (travel 500 mm) in the tool changer area for the turning tool holder and protective ring for semi-automatic changing. - Work table with integrated NC rotary table Ø 1,600 mm, for turning operations and for positioning operations with hydraulic clamping. - Rack and pinion drive in the X-axis via two servomotors controlled in a master-slave process.

Condition: excellent (used), Year of construction: 2012, Arburg 820S 4000-2100/400 / Production line with the robot Sepro Industrial Robot SR S5-35 S3 Trans / Operating hours: 42,014 h in automatic mode Year of manufacture: 09.2012 Bljdozy I Tpjpfx Ahmon Injection unit: Screw diameter: 60 mm Injection weight: 723 g Injection pressure: 2500 bar Dosing volume: 792 cc Clamping unit: Clamping force: 400 t Bar spacing: 820x820 mm Size of the clamping plates: 1171x1171 mm Ejector: hydraulic Clamping unit: hydraulic Control: SELOGICA - touchscreen Additional equipment: 2K injection molding machine with rotary table and robot Very good technical condition Operating hours: 42,014 h in Automatic operation Euromap 67 Robot interface Air valve x 6 Hydraulic, needle core pull, controlled by a proportional valve x 4 pairs Control with hot runners x 24 Reinforced injection units - bimetal Proportional valve on the vertical injection unit - precise injection Machine with six cylinders / batteries with compressed nitrogen (additional charge for fast work) Parallel movements Automatic tool height adjustment Screw diameter in the vertical injection unit: ⌀40 mm - 184 g/PS The built-in system for controlling the print quality from the Sensor Kistler brand - measuring the tool pressure Original Weber rotary table: very precise, electrically driven by a servo motor controlled by an inverter Rotary table diameter: 1200 mm Purchase of the rotary table at an additional cost Robot Sepro Industrial Robot SR S5-35 S3 Trans Year of manufacture: 2012 3-axis robot: 3 axes are driven by servo motors (electric): X, Y, Z (telescopic) Travel paths in axes approx.: X-5000, Y-1400, Z-2000 Automatic axis lubrication Touch control panel The robot safety package Robot with adapter and protective housing Purchase of the robot for an additional charge Dimensions: Weight: 21000 kg Length/width/height: 8.00x2.32x4.21 m All machines offered are started by our service technicians before sale. It is possible to receive a video of the technical tests of the selected machine or to take part in live technical tests in our company in Łódź. Price: On request

Condition: used, Pair of cast iron angle plates Drilling diameter: Ø 27 mm Blsdpfxsz H I Ano Ahmjn Width: 575 mm Depth: 2000 mm Total height: 4000 mm Unit weight: approx 6 T

Condition: used, 1 used welding machine Manufacturer: Fronius Model: Synergic 3400 G/W/E Suitable for welding steel, stainless steel, and aluminium using the MIG/MAG process. Technical specifications: Max. welding current: 340 A Wire diameter: 0.8/1.0/1.2 mm possible Connection voltage: 380 volts Bsdpfx Ahsyl Id Tjmjln Duty cycle (ED) 35% at 340 A Digital display Dimensions (L x W x H): 890 x 460 x 945 mm Total weight: 139 kg

Condition: good (used), Year of construction: 2017, functionality: fully functional, travel distance X-axis: 560 mm, travel distance Y-axis: 560 mm, travel distance Z-axis: 660 mm, controller manufacturer: Siemens, controller model: Sinumerik 804D, rotational speed (max.): 20,000 rpm, spindle speed (max.): 20,000 rpm, spindle nose: HSK 63, number of spindles: 1, number of slots in tool magazine: 60, Horizontal machining center DMG MORI NHX 4000 with 2-pallet changer Year of manufacture: 2017 Control: Celos with Sinumerik 840Dsl Operate Program run hours: 21,000 h Technical data: Spindle speed: 10 – 20,000 rpm (speedMASTER® motor spindle) Bljdpjyghq Asfx Ahmon Drive power: 35/25 kW Torque: 130/85 Nm Tool holder: HSK 63 Magazine positions: 60 – ring magazine Travel paths: X-axis: 560 mm Y-axis: 560 mm Z-axis: 660 mm C-axis: 0.001° Pallet size: 400x400 mm Equipment: 2-pallet changer Coolant system for through-spindle coolant (IKZ) 70 bar Chip conveyor Renishaw 3D probe

Condition: excellent (used), functionality: fully functional, We are offering this very well-maintained Fasti PC 4000 pivoting bending machine, 3 m long, with a segmented die and a back gauge. Manufacturer: Fasti Bodezxptbjpfx Ahmeln Model: PC 4000 Condition: very good Year of manufacture: Category ID: 1470 Type ID: 1258 Machine type: Pivoting bending machine Part number: 7.0559 B For sale: 3 m sheet metal bending machine in good condition, with a back gauge and the option to mount the upper die as a segment. Various die adapters are also available. If interested, an upper tooling platform is also available for an additional 1,000 EUR to the machine price. If you have any questions or need more information, please feel free to send us a message or call us.