Used Gannomat Junior Lbm 320 for sale (3,787)

Condition: used, Year of construction: 2000, Number of spindles in row: 11 Number of horizontal spindles: 3 Cup hinge boring head: yes, Blum Drill pitch: 32mm Ijdpfx Anexc Hi Uo Iobc Power consumption: 2.2kW Drilling unit: swiveling

Condition: used, Year of construction: 2016, functionality: fully functional, power: 3 kW (4.08 HP), input voltage: 400 V, input frequency: 50 Hz, type of input current: three-phase, cutting height (max.): 325 mm, cutting width (max.): 500 mm, control type: manual, pivoting range: 30 °, actuation type: hydraulic, total height: 1,400 mm, total length: 2,050 mm, total width: 1,300 mm, overall weight: 910 kg, table height: 76 mm, Equipment: CE marking, documentation/manual, Bandsaw machine MEBAswing 320 G-HSS Year of manufacture: 2016 Cutting capacity, round at 90 degrees: Ø 325 mm / at 45 degrees: Ø 300 mm Cutting capacity, flat at 90 degrees: 500 x 300 mm / at 45 degrees: 300 x 300 mm Saw blade speed 15-150 m/min Saw blade dimensions 4200 x 34 x 1.1 mm Connection: 400V 3-phase Total power requirement 3 kW Dimensions L x W x H: 2050 x 1300 x 1400 mm Weight 910 kg Standard equipment: Quick mitre adjustment from 90° to 30° in increments of 0.5° accuracy Ibjdpez I Ig Nsfx An Iec according to the scale. The mitre pivot point is the intersection between the saw blade and the material support, thus there is no change in the length dimension. At every angle setting of the saw frame, the material is clamped parallel at 90°. Coolant system with electric submersible pump Machine stand with chip collection tray Precise saw blade carbide roller guide, saw blade brush MEBA high-performance package, "HSS" version: Hydraulic raising and lowering of the saw frame and hydraulic clamping of the sawing material. Infinitely adjustable hydraulic cutting pressure and feed rate. Display of lowering speed on a scale. Display of cutting pressure on a manometer. Rapid lowering of the saw frame via push button to the material edge Frequency-controlled AC drive 15-150 m/min, 3 kW Hydraulic raising and lowering of the saw frame Including special equipment: Micro-dosing system: Economical and clean sawing: Minimum quantity lubrication with high-performance spray oil for dry chips without droplet formation. Ideal for tubes and profiles. Switching from coolant function to micro-spray nozzle. Compressed air connection required. Laser light for cut line indication/marking saw: Projects the cut line onto the sawing material and indicates the cutting channel. The workpiece can be manually aligned for a saw cut based on the marking. Clamping pressure adjustment at a fixed control panel: The clamping pressure can be manually adjusted via a pressure reducing valve. The applied pressure can be read on the corresponding manometer (in bar). Material stop 0-800mm 3 roller supports 6 new bandsaw blades High-performance spray oil Saw blade brushes

Condition: used, Year of construction: 2024, DOWEL HOLE DRILLING MACHINE GANNOMAT "DB 21400V, 3Ph, 50Hz / 1.5 kW, complete in standard design with: - Fully automatic electronic control with pulse operation via foot valve for clamping-drilling-releasing, electric intermittent operation. - Automatic retraction of the drilling unit after reaching the set drilling depth. - Automatic extension of the drilling hole depth when drilling on the end face. This eliminates the need to adjust the drilling hole depth from flat-face to end-face drilling (+10 mm, e.g. for a dowel length of 35 mm, drilling depth on the flat face 14 mm and drilling depth on the end face 24 mm). - 1 drilling bar with 21 spindles, pitch 32 mm, motor 1.5 kW (drilling feed 0-70 mm), incl. 21 quick-change chucks (Ganner system) for easy changing of the drill bits. - Easy pivoting of the drilling unit from 0° to 90°, supported by gas cylinders. - 1 clamping support movable in the Y-axis with 3 pneumatic clamping cylinders, for workpiece height up to max. 80 mm. Ideal stop system consisting of: - 1 stop rail 1800 mm for drilling shelves (aluminum profile 40x40 mm) with 3 stop blocks, with quick-change system, easily interchangeable from right to left stop side for drilling shelves in carcass structures in mirrored fashion, also suitable for row drilling in the 32 system. - Side stops and position settings, as well as the position of the drilling height above the support table, are adjusted by means of mechanical digital counters. - Side stops can be easily pivoted away, for the shortest possible conversion from carcass to frame and row drilling. - Clamping arms for the clamping support designed for row drilling positions up to max. 300 mm. - Ideal three-stage tool system. - 1 set of drill bits for dowels: - 5 carbide dowel drill bits, Ø 8x77 mm, right-hand - 4 carbide dowel drill bits, Ø 8x77 mm, left-hand Basic machine DOWEL HOLE DRILLING MACHINE GANNOMAT "DB 21400V, 3Ph, 50Hz / 1.5 kW, complete in standard design with: - Fully automatic electronic control with pulse operation via foot valve for clamping-drilling-releasing, electric intermittent operation. - Automatic retraction of the drilling unit after reaching the set drilling depth. - Automatic extension of the drilling hole depth when drilling on the end face. This eliminates the need to adjust the drilling hole depth from flat-face to end-face drilling (+10 mm, e.g. for a dowel length of 35 mm, drilling depth on the flat face 14 mm and drilling depth on the end face 24 mm). - 1 drilling bar with 21 spindles, pitch 32 mm, motor 1.5 kW (drilling feed 0-70 mm), incl. 21 quick-change chucks (Ganner system) for easy changing of the drill bits. - Easy pivoting of the drilling unit from 0° to 90°, supported by gas cylinders. - 1 clamping support movable in the Y-axis with 3 pneumatic clamping cylinders, for workpiece height up to max. 80 mm. - Ideal stop system consisting of: - 1 stop rail 1800 mm for drilling shelves (aluminum profile 40x40 mm) with 3 stop blocks, with quick-change system, easily interchangeable from right to left stop side for drilling shelves in carcass structures in mirrored fashion, also suitable for row drilling in the 32 system. - Side stops and position settings, as well as the position of the drilling height above the support table, are adjusted by means of mechanical digital counters. - Side stops can be easily pivoted away, for the shortest possible conversion from carcass to frame and row drilling. - Clamping arms for the clamping support des Ibedpfexnlfljx An Iec

Condition: excellent (used), Year of construction: 1991, functionality: fully functional, machine/vehicle number: 1028 161, drilling depth: 75 mm, total width: 900 mm, total length: 1,200 mm, overall weight: 430 kg, spindle speed (max.): 2,800 rpm, drill spindle length: 800 mm, workpiece height (max.): 80 mm, number of spindles: 23, operating pressure: 6 bar, GANNOMAT COMBI 110 Dowel and multi-hole drilling machine Isdjzvm Hajpfx An Isbc including stops READY FOR USE

Condition: new, Year of construction: 2026, Universal solid wood boring machine for frames and horizontal mortiser. Short introduction: • Universal application: frames, entry doors, windows, as well as useable as horizontal mortiser, ... • Drilling depth up to 150 mm (larger drilling depths optional) • Pneumatical position height adjustment for 2 levels 0 - 100 mm, adjustable through mechanical digital counters • Drilling in two height positions at a single workpiece clamping position • Pneumatic clamping cylinders • Multi spindle drillheads (option) Ibjdpfxsdx R D So An Ioc • Pneumatic feed (option) • Mobil through castors (option) or with pallet trucks

Condition: used, Used Machine Isdpjzk Nwdjfx An Iebc Used Ganner Compact 30 In-Line Drilling Machine Features and Technical Specifications: 2 drilling beams, each with 15 spindles Pitch: 32 mm Drilling unit position adjustment: 0–650 mm Distance between drill hole rows: at least 190 mm Spindle speed: 2,800 rpm Motor power: 2 × 0.75 kW Max. workpiece clamping height: 70 mm Working height: 850 mm Compressed air connection: 6 bar Availability: upon request Location: Flörsheim

Condition: refurbished (used), Year of construction: 1993, machine/vehicle number: 20658, functionality: fully functional, power: 22 kW (29.91 HP), input voltage: 400 V, input current: 63 A, input frequency: 50 Hz, type of input current: three-phase, pressing force: 320 t, stroke length: 250 mm, operating speed: 7 mm/s, reverse speed: 70 mm/s, table width: 250 mm, table length: 4,800 mm, table height: 980 mm, throat depth: 305 mm, ram plate length: 4,500 mm, distance table to ram: 500 mm, clearance between the columns: 3,760 mm, oil tank capacity: 350 l, total length: 6,300 mm, total width: 2,300 mm, total height: 3,475 mm, overall weight: 22,500 kg, year of last overhaul: 2026, Equipment: documentation/manual, safety light barrier, Hydraulic press brake LVD PPI 320/40 S840W Year of manufacture: 1993 Year of refurbishment: 2026 Serial number: 20658 Technical specifications: Force: 3200 kN Working length: 4500 mm Distance between uprights: 3760 mm Stroke: 250 mm Distance table – ram: 500 mm Gap: 305 mm Table width: 250 mm Approach speed: 80 mm/s Working speed: 7 mm/s Return speed: 70 mm/s Weight: 22500 kg Motor: 22 kW Oil capacity: 350 l Dimensions (L x W x H): 6300 x 2300 x 3475 mm New 2026 S840W controller • S840W: 15” touch screen – Graphic controller with free online service assistance • Axes: Y1, Y2, X, V • V: CNC crowning table • 2 front supports • Hydraulic clamping of the top tool in LVD classic 15 tool holder Ijdpfx Aozktg Asn Ijbc Tooling included: E15 H150 78° L3000mm D15 H150 78° L4500mm F15 H150 26° L4500mm H15 H150 L2500mm R15 H150 78° L4500mm V20 H130 30° L3500mm V20 H130 78° L3000mm V40 H130 78° L4500mm V60 H130 78° L4500mm V90 H130 78° L2500mm M130 Multi-V L4500mm (90/40/24/16/10)

Condition: used, Year of construction: 1985, Used Machine Year of Manufacture: 1985 Features and Technical Specifications: - For horizontal and vertical structural drilling - For vertical row drilling in a 32 mm grid - Vertical drilling unit with dual-spindle drill heads, freely positionable on an indexing shaft Ijdszk N Dwjpfx An Isbc - 1.5 kW motor with 1,400 rpm - 1.5 kW motor with 2,800 rpm - Drill heads with pneumatic stroke - Pneumatic workpiece clamps - Passage width approx. 850 mm - Includes various stops and drill bits - Machine needs to be inspected/serviced. Basic functions are intact Availability: available shortly Location: 63934 Röllbach

Condition: used, Used Machine Iedpfxezyy Dyo An Ijbc Features and Technical Specifications: - Fully automatic pneumatic control with control panel - Clamping, drilling, and unclamping; electric intermittent operation - Drilling unit: Number of spindles, pitch 32 mm: 23 Speed: 2,800 rpm Motor power: 1.5 kW/380 V Drill chuck for tools with a 10 mm h6 x 20 shank and flat Adjustment range for position settings: 0–60 mm Drill hole depth for drills with a total length of 57 mm: 0–30 mm Drill hole depth for drills with a total length of 77 mm: 0–50 mm Drill hole depth for drill bits with a total length of 95 mm: 0–70 mm - Passage width: max. 800 mm - Clamping height: max. 80 mm - Working height: 850 mm - Space requirement without stop ruler: 1200 x 900 mm - Compressed air connection: 6 bar - Sound level: less than 82 dB(A) - Weight: approx. 400 kg

Condition: used, Year of construction: 2016, functionality: fully functional, machine/vehicle number: 26-291510 R 1368710, Rod-type magazine for bar feeders, FMB TURBO 5-55/3200"A" Ibsdpfx Ansznl Uaj Isc Magazine for bar feeders, FMB TURBO 5-55/3200"A"

Condition: ready for operation (used), operating hours: 418 h, functionality: fully functional, power: 280 kW (380.69 HP), fuel type: diesel, type of cooling: air, Very well-maintained engine, very few hours of use. Iodpfx Ansz Sxgie Isbc

Condition: good (used), Year of construction: 1982, machine/vehicle number: 8065, The Kälin unit is functional and in working order. The included accessories are visible in the photos. The power cable has been cut. Iodpfx Ansz R Rurj Iebc

Condition: used, Year of construction: 2017, Number of drilling spindles: 21 units Pitch: 32 mm Drill chuck: Clamping surface, drill shank: 10 mm Operation: Foot pedal Tools: Yes, in mm Drilling direction: from below and from the front Swiveling: Manually Swiveling angle: only 0° or 90° Max. pass-through height: 80 mm Max. pass-through width: 750 mm Number of material clamps: 3 units Type of material clamping: pneumatic Design: Stationary Stop system: only for this series Weight approx.: 400 kg Motor power: 1.5 kW Dust extraction diameter: 120 mm Location: Customer Ibjdpfx Asihghron Ioc

Condition: used, Year of construction: 2015, Handles the full spectrum of blade types — bi-metal, carbide, wood, and stainless steel — up to 50 mm clamping width, covering blade dimensions from 6×0.40 mm up to 54×1.60 mm on bi-metal stock. At 25 kVA with 38 kN clamping force and 10 kN upsetting force, it delivers consistent, high-integrity welds across carbon and stainless steel strip with max. cross-sections of 150 mm² and 60 mm² respectively. The fully automatic welding and annealing cycle is recipe-controlled via touch panel — operator inserts the blade, hits start, and the machine handles the rest. Robust pneumatic clamping, water-cooled electrodes, and a 800 kg industrial frame make this a workhorse for sawmills, blade service centers, and large metalworking operations. Make and Model iDEAL BAS 320 Nominal output (50% DC) 25 kVA Secondary voltage 2.8 – 5.5 V (6 stages) Control voltage 24 DC Clamping force 38 kN Upsetting force (max.) 10 kN Air pressure (min.) 6 bar Air consumption per cycle 52.6 Nl (at 6 bar) Cooling water consumption 4–5 l/min (20–25°C) Machine weight approx. 800 kg Dimensions W/D/H 1214 / 957 / 1982 mm Connection voltage 380–420 Bi-metallic / carbide bandsaws 6×0.40 – 54×1.60 Wood saw blades 6×0.40 – 50×1.10 Stainless steel saw blades 10×0.40 – 40×0.80 Strip blades 6×0.40 – 50×1.00 Steel strip S235JR max. 150 mm² Stainless steel max. 60 mm² Max. clamping width 50 mm Ibodjz Rkcaepfx An Isc

Condition: ready for operation (used), Year of construction: 1995, Available immediately ex works: Hydraulic horizontal band saw automation machine, Jaespa Ijdpfx Aez R Nupen Isbc Type W 320 AZ – 6 Year of manufacture 1995 Cutting capacity: 320 mm round / 90 degrees Cutting capacity: 320 x 320 mm rectangular / 90 degrees Band speed, infinitely variable: 15 – 110 m/min Drive power: 4.9 kW Cutting lengths: 5 – 9999 mm Complete as shown in the picture, including all powered roller conveyors Weight: 2.2 tons Price: EUR 2,750.00 plus VAT, ex works

Condition: excellent (used), functionality: fully functional, Year of construction: 2011, machine/vehicle number: 230655, control type: NC control, actuation type: hydraulic, roller (top) diameter: 320 mm, side roll diameter: 240 mm, sheet thickness (max.): 25 mm, overall weight: 10,500 kg, total length: 4,350 mm, total width: 1,800 mm, total height: 1,950 mm, input voltage: 380 V, input frequency: 50 Hz, Equipment: documentation/manual, emergency stop, Key Technical SpecificationsWorking Length: 2050 mm Upper Roll Diameter: 320 mm Lower/Side Roll Diameter: 240 mm Bending/Rolling Capacity: Designed to handle steel plates up to 25 mm (rolling) and pre-bend up to 20 mm. Working Speed: 1.5 to 5 meters per minute. Ibjdpfjzzn A Tsx An Ijc Main Features 4-Roll Design: Allows full circle and varying radius rolling with precise edge pre-bending in a single pass. Linear Guide System: Directs hydraulic piston power straight to the material for higher bending accuracy. Application Suitability: Ideal for medium to heavy metal fabrication, cylindrical ferrules, and stainless steel processing. Optional: NC-control, Hydraulic Overhead Crane (Lift) 2,5m

Condition: used, Year of construction: 2015, functionality: fully functional, operating hours: 170 h, pressing force: 320 t, working width: 5,100 mm, degree of automation: automatic, Equipment: emergency stop, finger protection, foot remote control, lower tooling, safety light barrier, upper tooling, TOSKAR press brake Pressure 320 tons Bending length 5100mm Bending length between columns 4100mm Speed of approach movement 100 mm/s Speed of bending movement 9 mm/s Speed of return movement 100 mm/s Opening 300 mm Distance to columns 500mm Ibedowq Aa Iepfx An Ijc Year 2015 Only 170 working hours 5 Axes Y1, Y2, X, R, deflection arrow CNC controller with NexT touch screen

Condition: refurbished (used), Year of construction: 2012, operating hours: 19,376 h, functionality: fully functional, machine/vehicle number: 57755, RÖSLER Vibratory Finishing Machine / Rotary Vibrator – fully functional – newly coated – in very good condition For sale is a high-quality vibratory finishing/rotary vibrating system from the renowned manufacturer RÖSLER. The machine is in very good technical and optical condition, is fully functional, and can, of course, be inspected on-site after prior arrangement. Price: €14,500 net A particular advantage of this machine is the condition of the processing bowl: the machine was newly coated directly by the manufacturer RÖSLER. The coating is therefore in very good condition. The machine has been carefully maintained and overall gives a very well-kept impression. Depending on the abrasive media and process used, the system is suitable for deburring, rounding, smoothing, cleaning, and surface finishing of workpieces. Thanks to its robust industrial design, it is designed for professional use in production, metalworking, and surface treatment. The machine is offered including control cabinet/control system and the components shown in the pictures. The control system, drive, and mechanical components are functioning perfectly. The machine is ready for use and fully functional. Condition & Features: * Manufacturer: RÖSLER * Industrial vibratory finishing/rotary vibrating system * Fully functional * Processing bowl newly coated by the manufacturer RÖSLER * Very good technical condition * Well-maintained overall optical condition * Robust industrial design * Including control cabinet/control system * Separation/screening zone and discharge chute available * The machine is currently secured for transport on a pallet * On-site inspection possible by appointment Ibodpfxez D Sn No An Iec * Selling price: €14,500 net plus statutory VAT.

Condition: good (used), Year of construction: 1993, operating hours: 4,313 h, power: 22 kW (29.91 HP), input voltage: 400 V, input frequency: 50 Hz, pressing force: 320 t, stroke length: 250 mm, operating speed: 7 mm/s, reverse speed: 70 mm/s, table width: 250 mm, table length: 6,100 mm, throat depth: 300 mm, distance table to ram: 500 mm, clearance between the columns: 5,500 mm, oil tank capacity: 350 l, overall weight: 26,000 kg, Max. pressing force: 320 t Bending length: 6100 mm Distance between uprights: 5500 mm Control system: MNC 95 c Maximum ram stroke: 250 mm Max. distance table/ram: 500 mm Overhang: 300 mm Table width: 250 mm Closing speed: 80 mm/s Working speed: 7 mm/s Return speed: 70 mm/s Oil capacity: 350 l Operating hours: 4312 h Voltage: 380 V / 50 Hz Total power consumption: 22 kW Ijdpoz Rn Itefx An Ijbc Machine weight approx.: 26 t

Condition: used, Year of construction: 2008, functionality: fully functional, For sale: a window and door pressing machine, model Junior, manufactured by the Italian company Casolin. Bale pressing machine. Working area: 3000 mm (width) x 2500 mm (height). The machine is in good working order. We have the instruction manual in English. Export price – domestic price + VAT. Ibedpfx Aezzn Dwjn Ioc Transportation is the responsibility of the buyer; loading is the responsibility of the seller.

Condition: used, Year of construction: 1986, Second-hand machine Year of manufacture: 1986 Iodpfxezk N Ago An Iobc Features and technical specifications: - with 7-spindle row drilling head with positioning pins - Spacing 32 mm - with drilling head for BLUM hinges - with drilling head for Hettich hinges - with the corresponding press-fit dies - Motor 400 V, 0.75 kW, 2800 rpm - with stop bars Availability: at short notice Storage location: 63934 Röllbach

Condition: like new (used), Year of construction: 2016, functionality: fully functional, travel distance X-axis: 600 mm, travel distance Y-axis: 500 mm, travel distance Z-axis: 450 mm, spindle speed (max.): 3,000 rpm, spindle speed (min.): 55 rpm, total height: 2,075 mm, total width: 2,140 mm, total length: 3,250 mm, table length: 800 mm, overall weight: 2,450 kg, distance table to spindle center: 495 mm, Equipment: documentation/manual, ABENE milling machine, type VHF-320BS, in new condition, previously used in an educational institution. Ibsdpfx Aozt Ibtjn Ioc Specifications: - Year of manufacture: 2016 - Table dimensions: 800x400mm - X-axis travel: 600mm - Y-axis travel: 500mm - Z-axis travel: 450mm - Distance table-spindle: 45-495mm - 3-axis variable feed - Drilling spindle travel: 75mm - ISO 40 tool holder - Milling head, rotatable 140 degrees - Spindle speed: 55-3000 rpm, variable in 2 steps - Motor power: 7.5kW - Machine dimensions: 3250x2140x2075mm - Machine weight: 2450kg Machine equipped with: - SONY (Magnescale) digital readout on 3 axes - Variable spindle speed (digital display) - Variable feed, 3 axes (digital display) - Cooling system - Drilling spindle - Tool changer - Machine manual - Compliant with occupational safety regulations

Condition: excellent (used), functionality: fully functional, briquette diameter: 50 mm, Briquette diameter: 50 mm Maximum production: 50 kg/h Motor power: 7.5 HP Inspection door Ibsdpfx Aez I Srpsn Iec Die diameter: 1000 mm

Condition: new, Year of construction: 2023, functionality: fully functional, total height: 550 mm, total width: 300 mm, total length: 680 mm, input voltage: 400 V, ground cable length: 3 mm, overall weight: 36 kg, type of cooling: air, welding current at 100% duty cycle: 280 A, input current: 320 A, welding current (min.): 10 A, welding current (max.): 320 A, input frequency: 60 Hz, Equipment: head guard, The GYS NEOPULSE 320 C is a professional digital three-phase welding power source designed for high-performance MIG/MAG, Pulse MIG/MAG, TIG DC, and MMA welding. Welding current: 10–320 A Power supply: 3 × 400 V AC, 50/60 Hz, ±15% Maximum input current: 26 A Ibodez H Uizepfx An Iec Effective input current: 22 A MIG/MAG duty cycle: 320 A 40%, 300 A 60%, 280 A 100% TIG DC duty cycle: 320 A 40%, 300 A 60%, 280 A 100% MMA duty cycle: 320 A 40%, 300 A 60%, 280 A 100% Open-circuit voltage: 85 V Wire feed speed: 1–22 m/min Protection class: IP23 Insulation class: Class A Cooling: Air-cooled power source; compatible with an optional water-cooling unit for water-cooled torches Processes: MIG/MAG, Pulse MIG/MAG, TIG DC, and MMA Manufacturer: GYS S.A.S., France The NEOPULSE 320 C is equipped with digital synergic control, allowing for precise adjustment of welding parameters and providing stable, high-quality welding performance. It is suitable for welding mild steel, stainless steel, aluminum, and other alloys in professional and industrial applications.

Condition: used, TECHNICAL DETAILS - Table dimensions : 300 x 200 [mm] - Cutting strength : 1700 [daN] - Max. slide travel : 125 [mm] - Max. approach speed : 360 [mm/s] - Slide stopping time : 50 [ms] - Number of working hours : 2290 [h] - Lower extractor POWER SUPPLY - Operating voltage : 3x 400 [V] - Frequency : 50 [Hz] - Nominal current : 5.5 [A] - Installed power : 2 [kW] FLOOR DIMENSIONS - Dimensions ((ength-width-height) : 1200 x 1100 x 2200 [mm] Iodpfouhak Usx An Iobc - Weight : 725 [kg]