Used Gdw Precision Cycle Lathe for sale (14,034)

Condition: used, Year of construction: 2017, Emcomat E300 for sale. The machine was manufactured in 2017. Machine type: EM300x1500 SIEM Year: 2017 Some repairs have been carried out, and the following defects are known to us: Geometry checked. Z-guides in the area of the main spindle (chuck) are 'slightly' worn. Tool turret checked and adjusted. X-axis belt renewed and machine zero point set. Z-guides in the area of the chuck are slightly worn. Automatic band lubrication oil leak – troubleshooting completed, problem resolved, lubrication oil line renewed. 100% operational. Loaded free of charge. Immediately available. Location: 8740 Zeltweg, Austria Isdpfx Abew I S Uue Neat

Condition: used, YOM 2013 Chuck Size – 150mm Bar Capacity – 53mm Swing – 430mm Spindle Speed - 4,000 RPM Control - Siemens 802D Distance Between Centers – 1000mm X-Axis Travel – 220mm Z-Axis Travel – 1065mm Swing Over Cross Slide – 200mm Motor – 10 HP 4-Way Tool Post Tailstock Over Dimensions (Approx.) 2.75m x 1.3m Weight (Est.) 2800kgs Iajdjy Dtuiepfx Ab Net

Condition: defective spare-parts repository (used), Year of construction: 1994, operating hours: 68,921 h, functionality: not functional, spindle bore: 70 mm, turning length: 1,500 mm, turning diameter: 500 mm, swing diameter over cross slide: 290 mm, quill stroke: 180 mm, spindle speed (max.): 2,800 rpm, overall weight: 3,200 kg, Good day, We hereby offer you, without obligation, a used, defective cycle lathe from the manufacturer Gildemeister. Manufacturer: Gildemeister Model: NEF 500 Plus Year of manufacture: 1994 Total operating hours: 68,921 hours Turning diameter: 500 mm Turning length: 1,500 mm Control system: Manual Plus Spindle bore diameter: 70 mm Speed range: 8 – 2,800 rpm Gear stages: 3 Maximum swing diameter over cross slide: 290 mm Spindle nose: DIN 55027 size 8 Tool holder type: C Tailstock quill stroke: 180 mm Machine weight: approx. 3.2 t Dimensions (L x W x H): 3.0 x 1.8 x 1.8 m Note: The above technical data have been taken from the operating manual, manufacturer brochures, or other sources, for the accuracy and completeness of which we cannot accept any liability. Scope of supply: 1 used Gildemeister NEF 500 Plus cycle lathe Condition: The cycle lathe is not operational because the control does not power up. The machine can be inspected under power in our workshop, but cannot be put into operation. We are therefore selling the machine as defective. We would be pleased if this machine is of interest to you. Your Serviceteam Mertens & Frowein GmbH Iaedpsy Hr U Hofx Ab Nst

Condition: excellent (used), Year of construction: 1978, functionality: fully functional, machine/vehicle number: BL278700, spindle bore: 40 mm, spindle nose: Camlock D1-4, spindle speed (max.): 55 rpm, spindle speed (min.): 3,000 rpm, empty load weight: 1,250 kg, For sale is a Schaublin 150 in very good refurbished condition. Fully operational. The spindle was overhauled in 2021, with the spindle bearing set ordered directly from Schaublin. The guideways have been scraped and adjusted. The machine turns very accurately, with cylindrical deviation of only 1-2 thousandths over 200 mm. The machine can be inspected under power in 5023 Salzburg. Iaedoy Iu Nvopfx Ab Njt

Condition: good (used), Schaublin 102 N, machine number BL 329218, year of manufacture approx. 1998, center height 102 mm, center distance 375 mm, max. turning diameter over bed 200 mm, max. turning diameter over cross slide 120 mm, spindle speed up to 2,800 rpm, tailstock, accessories, Iedpfx Aey Hip Ijb Neat

Condition: good (used), Schaublin 102 N - VM, Machine number BL 330699, Year of manufacture approx. 1993, Machine with leadscrew, Centre height 102 mm, Leadscrew: diameter 40 mm, hardened and thread ground. Leadscrew pitch: 4 mm. Feeds: 8 longitudinal feeds from 0.02 to 0.3 mm/rev. Threading range: Metric: 20 pitches from 0.25 to 4 mm. Imperial (inch): 25 pitches from 80 to 6 tpi. Iasdpfx Aey Hin Reb Nst Centre distance 450 mm, max. turning diameter over bed 200 mm, max. turning diameter over cross slide 120 mm, Spindle speed up to 2,800 rpm, Tailstock, Accessories,

Condition: new, Year of construction: 2025, - New machine - Precision lathe with automatic cycle control, for chuck and shaft machining. Brand: WEILER | Model: E 120 x 4500 | Year of manufacture: 2025 The precision giant. A powerful and energy-efficient production lathe with optimum accessibility. The machine for heavy workpieces. Maximum cost-effectiveness from turning to milling. Precise and universally applicable, it impresses with: - State-of-the-art control and drive technology - Extremely simple operation and programming - Highest accuracy - Longevity - User-friendly ergonomics TECHNICAL DATA / ACCESSORIES, EQUIPMENT: Control system: Weiler cycle control ONE 1 (Siemens) Working range: - Centre height: 600 mm - Swivel diameter over bed: 1.200 mm Iaedpoy Hfy Asfx Ab Nst - Swivel diameter over cross slide: 830 mm - Centre distance: 4.500 mm Extensive, high-quality equipment. Sales within Germany include a 24-month warranty. No guarantee is given as to the completeness and accuracy of the technical specifications or the equipment. - Subject to prior sale - Detailed technical data sheet and information on the equipment available on request.

Condition: good (used), Year of construction: 1999, functionality: fully functional, Gildemeister NEF 320 / Cycle Lathe, Year of manufacture: 1999, Control: Manual Plus, Iodoy Ev I Ujpfx Ab Neat Centre distance: 750 mm, Swing diameter over bed: 320 mm, Spindle speed up to 4,000 rpm, 2 gearbox stages, Multifix toolholder, Tailstock, 2 steadies, Accessories,

Condition: ready for operation (used), Year of construction: 2017, functionality: fully functional, turning diameter over cross slide: 310 mm, turning length: 2,000 mm, turning diameter: 540 mm, spindle bore: 85 mm, spindle speed (max.): 2,250 rpm, travel distance X-axis: 350 mm, travel distance Z-axis: 1,850 mm, rapid traverse X-axis: 5,000 m/min, rapid traverse Z-axis: 8,000 m/min, total height: 2,235 mm, total length: 3,840 mm, total width: 1,925 mm, quill travel distance: 210 mm, quill diameter: 75 mm, overall weight: 4,200 kg, chuck outer diameter: 315 mm, spindle nose: D1-8, center height: 270 mm, Siemens 828D control with ShopTurn Max. turning diameter over bed: 540 mm Max. turning diameter over carriage: 310 mm Center height: 270 mm Distance between centers: 2000 mm X / Z-axis travel: 350 / 1850 mm Chuck diameter: 315 mm Spindle bore: 85 mm Iajdpfx Aboy Ey Eds Not Spindle speed: 2250 rpm Tailstock quill diameter: 75 mm Tailstock quill stroke: 210 mm Tailstock taper: MT5 Feed rate: 5000 mm/min Rapid traverse X / Z-axis: 5000 / 8000 mm Workpiece weight: - Chuck only: 300 kg - With tailstock: 700 kg - With tailstock and steady rest: 1200 kg Machine dimensions without chip conveyor (L x W x H): 3840 x 1925 x 2235 mm Machine weight: 4200 kg Includes: 2 steady rests, 2 Multifix toolholders, Schunk Rota-S315 3-jaw chuck, chip conveyor, manuals

Condition: new, functionality: fully functional, overall weight: 2,500 kg, total length: 4,200 mm, total width: 2,500 mm, total height: 2,170 mm, travel distance X-axis: 390 mm, controller manufacturer: Siemens, controller model: 840D sl + ShopTurn mit „manual machine“, turning diameter over cross slide: 370 mm, bed width: 433 mm, center height: 315 mm, center width: 2,000 mm, quill diameter: 100 mm, quill stroke: 200 mm, rapid traverse Z-axis: 8 m/min, rapid traverse X-axis: 8 m/min, spindle bore: 140 mm, spindle speed (max.): 2,500 rpm, spindle speed (min.): 2 rpm, turning diameter over bed slide: 630 mm, Equipment: rotational speed infinitely variable, Swing over bed: 630 mm Center distance: 2000 mm Maximum speed range: 2500 rpm Spindle power (100% duty cycle): 20 kW (AC drive) Spindle mount: Camlock D11 Spindle bore: 140 mm Included equipment includes: - 8-station SAUTER VDI-40 turret - Movable control panel along the entire length - Chip conveyor - Siemens AC servo motors - Siemens power supply and amplifier modules - Automatic (or via M function) gear change (2 speeds) - Machining area covered by two sliding doors - Operating mode 1 and operating mode 2 (setup mode at 5 rpm) - Siemens 840D sl ShopTurn control system with "manual machine" - 15-inch touchscreen format 16:9 - With manual machines, cycles can be executed without creating a program header. - Siemens control option: residual material detection. Iedpfx Ajwgbuiob Neat - Absolute encoder (i.e., no reference point travel required). - USB interface on the control panel. - Manual tailstock with drag device and 100 mm spindle diameter. - Automatic central lubrication. - Coolant system.

Condition: excellent (used), For sale is a Schaublin 125 precision lathe in exceptionally good condition with extensive accessories. The machine was never used in production and shows barely any noticeable wear. Radial and axial runout at the spindle nose is less than 0.001mm. In terms of condition, this machine is almost as new. Naturally, the machine is fully functional and has been thoroughly checked. The brake and the feed control board were recently replaced. This is a rare opportunity to acquire one of the most precise conventional lathes in outstanding condition. TECHNICAL DATA: - Centre height: 125 mm - Centre distance: 500 mm - Maximum workpiece diameter over bed: 270 mm - Maximum workpiece diameter over cross slide: 120 mm - Infinitely variable spindle speeds: 225–3000 rpm - Spindle nose: Camlock D1-3 - Spindle bore: 32 mm - Collets: Schaublin B32 - Collet pass-through: 24 mm - Chuck pass-through: 28 mm - Bed travel: 440 mm - Carriage travel: 90 mm - Cross slide travel: 130 mm - Tailstock quill taper: Morse 2 - Tailstock quill travel: 100 mm - Automatic feeds, longitudinal & cross: 4–260 mm/min, stepless Weight approx. 950 kg Accessories: - Röhm 160 mm 3-jaw chuck - Reishauer 160 mm 4-jaw independent chuck - 160 mm 4-jaw self-centering chuck - 6x Multifix tool holders - Change gears for thread cutting - B32 collet set from 1 to 24 mm with draw tube - Machine mounts - Complete documentation including original brochure Ijdpfx Aey Hnucob Njat

Year of construction: 1999, condition: ready for operation (used), A cycle-controlled CNC lathe Böhringer is available. Swing diameter over bed/faceplate: 570mm/365mm, center height: 280mm, bed width: 360mm, travel X: 345mm, cross slide dimensions X/Y: 260mm/680mm, bed slide guide length: 520mm, speed: 2500rpm, feed: 50mm/rev, rapid traverse X/Z: 10m/min/5m/min, quill stroke: 190mm, center angle: 60°, max. workpiece weight: 400kg/1000kg/1600kg. Documentation available. An on-site inspection is possible. Expected to be available July 2026. Iedpfx Absy Equyo Njat

Condition: used, For sale is a used Weiler Matador lathe. Version VS2 with pre-select gearbox. Comes with change gears and collet set. Good, fully functional condition. Centre height: 140 mm Swing over bed: 295 mm Distance between centres: 500 mm Spindle bore: 36 mm Spindle speeds: 15 - 3350 rpm Inspection under power possible in 5023 Salzburg. Forklift available for loading. Iedjy Hi A Ijpfx Ab Noat

Condition: good (used), Year of construction: 1999, Ref. -No.: 10365 Manufacturer: MONFORTS Type: KNC 8 S - 3000 Year of construction: 1999 Type of control: CNC Control: MTC K Storage location: Halberstadt Country of origin: Deutschland Machine-No.: 178.05 X stroke: 455 mm Z - stroke: 2850 mm Chuck diameter: 315/400/500 mm Centre Distance: 3000 mm Feed Capacity - Z: 23,9 kN Feed Capacity - X: 11,3 kN Isdsy Edz Aspfx Ab Noat Rapid Travel Speed X-Axis: 6,8 m / min Rapid Travel Speed Z-Axis: 4 m / min Circumferential diameter over radial slide: 540 mm Max swing diameter: 830 mm travel of the cross slide: 450 mm Spindle head max. passage for violent material: 88 mm Spindle head max. passage for bare material: 90 mm Tailstock outside diameter of the quill: 125 mm Tailstock maximum quill stroke: 200 mm Tailstock inner cone: MK6 Type hydraulic tank: 15 L. coolant reservoir: 220 L. Coolant tank at chip conveyor: 160 L. Machine length: 5200 mm Machine width: 2110 mm Machine Height: 1995 mm Weight Of The Machine Ca.: 6,850 (Ohne Späneförderer und Kühlmittelbehäter) t Headstock Spindle Head: DIN 55027 - 11x290 Further information: Additional lubricating oil tank approx. 6l incl. tools Machine is under power and can be inspected by arrangement.

Condition: good (used), Year of construction: 2011, functionality: fully functional, Saeilo Dialog H 66 Iodjy D I Hmjpfx Ab Noat Control: Siemens 840DSL with ShopTurn Swing diameter over bed: 600 mm Centre distance: 2,000 mm Turning length: 1,980 mm Gear stages: 2 Spindle bore: 105 mm Spindle speed: 2,500 rpm Power: 18.5 kW

Condition: used, Year of construction: 2000, Technical details: turning diameter: 800 mm turning length: 2965 mm max. turning dia. over saddle: 520 mm spindle bore: 92 mm turning speed range: 3 - 1800 U/min spindle head: Größe 11 total power requirement: 37 kW weight of the machine ca.: 6,5 t Iaedpfxoxxig Us Ab Not dimensions of the machine ca.: 5,2 x 2,2 x 1,9 m Teach In Control MTC-K 3-jaw chuck ROTAS Dia. 400 mm face plate RÖHM Dia. 630 mm 4-station toolholder system PARAT 1 fixed steady coolant attachment and chip conveyor *

Condition: used, Year of construction: 1996, Technical details: turning diameter: 500 mm turning length: 1500 mm turning diameter over bed slide: 290 spindle bore: 71 mm turning speed range: 3 - 2800 U/min rapid speed: 10 / 5 m/min feed speeds: 1 - 2000 mm/min Isdswwlvljpfx Ab Nsat total power requirement: 22 kW weight of the machine ca.: 3,2 t dimensions of the machine ca.: 3,0 x 1,6 x 2 m with Teach In controll R&D MTC-K PARAT toolpost 1 fixed steday dia. 100 mm 4 jaw face plate dia. 500 mm coolant attachment *

Condition: used, Year of construction: 1998, Technical details: turning diameter: 830 mm turning length: 4000 mm turning diameter over bed slide: 540 mm spindle bore: 130 mm turning speed range: 2 - 1600 U/min rapid speed: 4 / 5 m/min feed speeds: 1 - 2000 mm/min total power requirement: 55 kW weight of the machine ca.: 7,5 t dimensions of the machine ca.: 7 x 2,2 x 2 m with Teach In controll R&D MTC-K MULTIFIX toolpost size D coolant attachment * Isdpewwlt Rofx Ab Neat

Condition: excellent (used), Year of construction: 2014, VDF 400 DUS ti Year of manufacture: 2014 Siemens 840 D sl Swing diameter: 420 mm Turning length: 1000 mm Spindle speed: 10-3000 rpm, 11 kW gearbox, 2-speed Parat Gr.2, 4-position turret Tailstock Drill rest Coolant system 5 bar Chuck Schunk Rota -S 250 mm Extraction unit by Bristol LED light Iaodpfxey Emvij Ab Not Memory expansion Loading and transport possible Available immediately. For questions and an exact price, please send a message with your address and email.

Condition: excellent (used), Year of construction: 1998, turning diameter 570 mm Iasdpfx Abey D T Uvs Njt turning length 1000 mm control Siemens / Weiler D2 weight of the machine ca. 3,2 t dimensions of the machine ca. 3,0 x 2,0 x 1,9 m

Condition: good (used), Year of construction: 2004, functionality: fully functional, Technical details turning diameter 570 mm turning length 2000 mm Iodpfey Dpvvsx Ab Noat control Heidenhain turning diameter over bed slide 340 spindle turning speed range 1 - 2500 U/min weight of the machine ca. 3,6 t Additional information Features: 2 steady rests Manual chuck with jaws Tool holder with inserts

Condition: good (used), functionality: fully functional, Technical data: Centre height 110 mm Centre width 160 mm Spindle bore 23 mm Motor power 1.7 kW Speed can be set via potentiometer from approx. 100 - 2,300 rpm 3 pre-selected speeds or 3 switching levels . Iodpfxsy Egmhe Ab Neat Scope of delivery, machine with: Operating modes: Manual + automatic Pneumatic clamping device Tilt tailstock with 2 sleeves for K 12 collets, with control switch for switching Hand lever cross support with 4 stops, consisting of cross and longitudinal support .

Condition: used, Mechanic's Lathe SCHAUBLIN Type 102 Mach. No. 1998 Centre distance: 350 mm Bed length overall from headstock: 635 mm Swing over bed: 200 mm Iasdpfxoy Dvf Re Ab Net Centre height over bed: 102 mm Swing over cross slide: 120 mm Centre height over cross slide: 61 mm Spindle bore: 18/20 mm Spindle speed, gear stage 1: approx. 120 / 190 / 320 rpm Spindle speed, gear stage 2: approx. 590 / 970 / 1500 rpm Chuck mounting: external thread M38 x 3 mm Tailstock taper: MT 1 Drive motor: 0.55 kW, 920 rpm Power supply: 380 Volt, 50 Hz - Spindle speeds adjustable via 2 gearbox stages and 3-step drive belt shifting - Main spindle with forward and reverse operation - Spindle mount with M38 x 3 mm thread - 3-jaw scroll chuck Ø 128 mm with stepped jaws - Collet clamping system with 6 round collets Ø 3 / 4 / 5 / 6 / 8 / 20 mm - Integrated dividing plate on main spindle with 48 / 60 / 100 holes - Toolholder slot approx. 10 x 18 mm with clamping screw - Sturdy wooden base with 42 mm laminated board Required space (with stand): L x W x H: 1160 x 750 x 1300 mm Weight with stand: 150 kg Good condition

Condition: used, Year of construction: 2004, control Heidenhain turning length 1.000 mm turning diameter over bed 500 mm turning dia. over slide 290 mm centre distance 1.500 mm x-axis 260 mm z-axis 1.000 mm spindle bore 70 mm spindle tunring speed 3.000 U/min spindle motor 12 kW In our assessment, the machine is in good used condition and can be inspected under power by appointment. Iodpfx Asy A Tdbeb Noat Accessories, tools, and clamping devices shown are only included in the scope of delivery if this is noted in the additional information. Technical data and specifications are subject to change without notice and errors. Prior sale is reserved.

Condition: excellent (used), Year of construction: 2004, Year of manufacture: 2004 Sauter 8-position VDI 20 turret with all stations powered tools Spindle holding brake Interpolating C-axis Reinforced coolant pump 2.3 bar / 28 l/min Isdpfx Aey Dckasb Noat Control: Heidenhain MANUAL PLUS (cycle control) Monitor: 10.4" TFT VGA color display Working area & capacity Swing diameter: 320 mm (over bed) / 150 mm (over cross slide) Distance between centers: 750 mm Cross travel: 185 mm Spindle bore: 56.6 mm Spindle nose: Size 6 (according to DIN 55027) / Mount MK 6 (AC) Drive power: 9 kW (at 100% duty cycle) Max. torque: 410 Nm Speed range: 20 – 4,000 rpm (2 gear stages) Stage 1: 20 – 1,000 rpm Stage 2: 40 – 4,000 rpm Feed & axes Rapid traverse (X/Z): 8 / 10 m/min Feed speed: 5 m/min Feed force: 300 daN (X) / 600 daN (Z) C-axis: Interpolating (option included) Tool turret & tailstock Turret: 8-station disc turret (Sauter), all stations powered Speed for driven tools: Max. 6,000 rpm (3.8 kW) Tooling system: VDI 20 (DIN 69880) Tailstock: Quill diameter 70 mm, stroke 120 mm, MK 5 mount Dimensions & capacities Footprint: approx. 2,600 x 1,915 x 1,730 mm Weight: approx. 2,200 kg Coolant tank: approx. 70 liters Fixed steady rest with rollers, guide diameter 10-115 mm Travelling steady rest with rollers, guide diameter 10-115 mm Three-jaw chuck Schunk Rota Splus 200-52 J 6, high precision Quick-action chuck with lever, SSF 40/6 Ortlieb, collet 173 E Preparation for faceplate operation, includes speed monitoring with separately adjustable speed supervision. Tooling equipment: fixed turning tool holders and driven tool holders Jaws / hard and soft Collets 173 E The machine was used in single-part production for prototype manufacturing. Low spindle running hours Available immediately.