Used Graaf Hvp 300 for sale (12,886)

Condition: excellent (used), CATALOGUE NUMBER: 6985 TECHNICAL DATA - Maximum width of the workpiece: 300mm Cjdszw Dvbepfx Ahmjhc - Height of the workpiece: 200mm - Unit: grooved rubber roller + shoe + metal roller - Work table: 1230x440mm - Belt: 300x1900mm Top: - Slip roller, rubber - Unit approximately 7.5kW - Slip roller, rubber Bottom: - Pulling belt - Pneumatic oscillation - 2 feed speed settings - Feed motor: 0.85kW - Diameter of dust extraction port: 110mm - Dimensions (L/W/H): 1250/1000/1950mm - Weight: 530kg - Unpainted - Used grinder - Very good condition Net price: 13900 PLN Net price: 3230 EUR Net price calculated using an exchange rate of 4.3 PLN/EUR (Prices may be subject to change in the event of significant exchange rate fluctuations)

Condition: like new (used), Year of construction: 2025, functionality: fully functional, power: 7.5 kW (10.20 HP), input voltage: 400 V, input current: 13 A, input frequency: 50 Hz, type of input current: three-phase, volume flow: 5,089 m³/h, intake manifold diameter: 300 mm, actuation type: electric, overall weight: 952 kg, We are offering this like-new AL-KO POWER UNIT 300 P mobile dust extraction unit, manufactured in 2025, without warranty or the possibility of return. The unit is in perfect, fully functional condition. You are welcome to inspect the unit at our premises. The sale will be processed with an invoice. Type: POWER UNIT 300 P Article number: 195 677 03 Manufacturer's number: 2433409659/01 Year of manufacture: 2025 Intake nozzle: 300 mm Rated speed: 2900 1/min Rated volume flow: 5.089 m³/h Rated current: 13.7 A Vacuum at rated volume flow: 2.587 Pa Protection class: IP 54 Motor power: 7.5 kW Weight: 952 kg Voltage/current type/frequency: 400/3~/50 V/Hz Compressed air connection: 4.0 bar Fuse rating: 25 A Filter: 85101202 Kat M Chedpsz E H Dujfx Ahmsc If you have any questions or require further information, please send us a message or call us.

Condition: used, Year of construction: 2017, functionality: limited functionality, number of ink cartridges: 7, number of print heads: 4, paper height (max.): 100 mm, Flatbed printer, CMYK+White+Primer+Varnish colors. Table dimensions: 33x80cm. Cedpfx Aez Hq N Rehmohc It has all of Roland's upgrades (pumps - print heads). In very good condition, fully functional. The table will need to be replaced soon. The cost of the table is €3000, and the entire mechanism is replaced along with the table.

Condition: used, 2x KWB Powerfire TDS 300 Wood Chip Boilers – approx. 600 kW For sale are two KWB Powerfire TDS 300 wood chip boilers, which were operated together in a cascade system. 👉 Total output: approx. 600 kW — Technical Highlights: • Rotary grate combustion system – robust, self-cleaning • Cyclone combustion chamber – clean combustion, low emissions • Lambda control – optimal efficiency • Fully automatic output modulation • Automatic heat exchanger cleaning • KWB Comfort 3 control system • Suitable for both wood chips and pellets — Advantages of the Cascade System: • Flexible performance adjustment as required • Very efficient in partial load operation • Each boiler can be operated independently • Redundancy / operational reliability — Scope of Supply: ✔ Includes feed auger on both boilers (ca. 1 m screw conveyor with drive motor, mounted directly on the boiler – feeds fuel directly into the combustion chamber) ⚠️ Note: No discharge / conveying system (fuel extraction from store) → available on request at additional cost — 📍 Location: Mosonmagyaróvár, Hungary 👉 approx. 80 km from Vienna 👉 approx. 35 km from Parndorf TOP HEATING SYSTEMS – Used heating systems, boilers, heat pumps & accessories direct from stock We are a family business with around 20 years of experience in heating technology. Our 1,500 m² warehouse in Mosonmagyaróvár, Hungary, maintains a permanent stock of approx. 50–60 units. 📍 Location: Our warehouse is located in Mosonmagyaróvár, Hungary – approx. 15 km from the Austrian border and approx. 80 km from Vienna. Mosonmagyaróvár is the first major city after the Austrian-Hungarian border. 🔥 Our product range includes: • Wood chip boilers • Pellet boilers • Log gasification boilers • Log boilers • Biomass boilers • Oil and gas boilers • Heat pumps • Thermoventilators • Hot air blowers • Warm air heating units • Industrial heaters • Buffer tanks • Heat exchangers • Screw conveyors • Fuel extraction systems • Burners • Pumps • A comprehensive range of heating accessories ⚙️ Accessories and Components: We also offer a broad range of accessories, including circulation pumps, plate heat exchangers, and many other components for private to industrial applications. 🏭 Brands in our portfolio: Fröling, Hargassner, KWB, HDG, Binder, ETA, Herz, Guntamatic, Windhager, Viessmann, Buderus, and many more. 🌐 Current offers: Most of our current offers can be found on our website: topheatingsystems.com We also have additional equipment in stock that is not yet listed online. 📅 Inspection: Viewing at our warehouse is possible by appointment. Cjdpfxey A Ewte Ahmehc If interested, please contact us – we look forward to helping you find the right solution.

Condition: excellent (used), Year of construction: 2012, Engel Victory 1350/300 Tech Ecodrive with Sepro Industrial Robot SDR 22S / Hybrid Machine / Operating Hours: approx. 18,000 hours in automatic operation Year of Construction: 2012 Injection Unit: Screw Diameter: 60 mm Shot Weight: approx. 670 g Injection Pressure: 1835 bar Dosing Volume: 735 ccm Clamping Unit: Clamping Force: 300 t Tie Bar Spacing: 0x0 mm Platen Size: 1200x1000 mm Ejector: hydraulic Clamping Unit: hydraulic Control System: CC 200 - Touchscreen Additional Equipment: Production line with Sepro Industrial Robot SDR 22S Machine in very good technical condition Operating Hours: approx. 18,000 hours in automatic operation Tie-barless, hybrid machine: energy-saving and very quiet Hydraulic core pull x 2 Control system with hot runner system x 12 Injection unit is wear-resistant and corrosion-resistant Main motor of the machine - driven by a servomotor with inverter - energy saving Proportional valve on the injection unit – precise injection Option to purchase spacer plates (movable and fixed), water-cooled plates, screw hole diameter M20 Material supply system Motan (dosing and conveying unit) available at an extra charge Robot Sepro Industrial Robot SDR 22S Year of Construction: 2016 4-axis robot: 3 axes are driven by servomotors (electric); Axis C - pneumatic Travel distances in axes: X-1500, Y-2200, Z-800 Vacuum x 2 Gripper x 2 Touch control panel Safety package for robot Robot with adapter, conveyor belt, and protective housing from Engel Purchase of the robot and conveyor belt available at an extra charge Dimensions: Weight: 19900 kg Length/Width/Height: 7.06x2.13x2.30 m All offered machines are started by our service technicians before sale. Csdpfxez Ipu Uj Ahmehc It is possible to obtain a video of the technical tests of the selected machine or to participate in live technical tests at our company in Łódź. Price: On request

Condition: good (used), Year of construction: 2011, functionality: fully functional, machine/vehicle number: 1009456, total height: 1,350 mm, total width: 600 mm, total length: 700 mm, overall weight: 30 kg, type of input current: AC, input voltage: 230 V, input current: 6 A, Equipment: documentation/manual, Audion PANDYNO Bag Filling and Sealing Machine For sale is an Audion PANDYNO bag filling and foil sealing machine on a mobile stainless steel frame. This system is suitable for filling and sealing bags with powders, granules, and similar products. The machine is in good condition and is offered with documentation. It has only been used for food products. Chodpfxjz Hyr Ij Ahmoc

Condition: excellent (used), Year of construction: 2012, Battenfeld EcoPower SE 300/1330 / Electric machine Year of manufacture: 2012 Injection unit: Screw diameter: 50 mm Injection weight: 491.4 g Injection pressure: 2470 bar Metering volume: 540 ccm Clamping unit: Clamping force: 300 t tie bar distance: 770x720 mm size of clamping platens: 1090x1170 mm ejector: electric clamping unit: toggle lever Chsdpsz Ipgwofx Ahmoc control: UNILOG B6 - touch screen Additional equipment: electric machine: high speed, energy saving and very quiet Machine in very good technical condition Euromap 67 Robot interface Air valve x 8 Control unit with hot runners x6 Injection unit hardened - bimetal Parallel movements It is possible to change the screw diameter for fi 45, 55, 65 mm Dimensions: Weight: 14100 kg Length/width/height: 7.20x2.04x2.20m Propulsion: Pumps/motor: 0 kW Heating power: 22 kW Total power: 0 kW All offered machines are started by our service technicians before sale. It is possible to get a video of technical tests of the selected machine or participate in live technical tests in our company in Łódź. Price: Upon request

Condition: used, Year of construction: 2000, operating hours: 130,000 h, functionality: fully functional, overall weight: 22,000 kg, We are offering this used ENGEL ES 2050/300 HL injection molding machine, manufactured in 2000, for sale. Type: ES 2050/300 HL Codsz Hvvispfx Ahmohc Machine No.: 40505 Year of manufacture: 2000 Weight: 22,000 kg Operating hours: 130,000 For sale: Engel ES2050/300HL (EUR 10,000) and Wittmann W753 (EUR 10,000). Together for EUR 19,000. Production continues until January. Inspection and collection possible at the end of January. Location: 7343 Neutal, Austria.

Condition: excellent (used), Year of construction: 2006, functionality: fully functional, power: 5 kW (6.80 HP), input voltage: 380 V, input current: 14 A, input frequency: 50 Hz, type of input current: three-phase, cutting height (max.): 300 mm, cutting width (max.): 300 mm, total height: 1,750 mm, total length: 2,420 mm, total width: 2,200 mm, overall weight: 2,400 kg, table height: 750 mm, Equipment: CE marking, documentation/manual, For sale: MEBER SM300 automatic band saw. Minimum cut length in semi-automatic mode: 20 mm. Cjdpfx Ahsz Ikvasmjhc Minimum cut length in automatic mode: 90 mm. The machine comes with all original documentation (manuals, certificate of conformity, CE marking), as well as a sworn expert report prepared by a certified expert. Collection and transportation are the responsibility of the buyer, but I am willing to assist with loading the machine.

Condition: excellent (used), CATALOGUE NUMBER 7227 TECHNICAL DATA - working width 40 – 300mm - material thickness 10 – 35mm - min. material length 270mm - max. material length, no restrictions - max. feed rate 90m/min - feed rate continuously adjustable via a frequency inverter on the control panel - cutting speed 24m/min - milling motor power 2x4kW - milling cutter speed 7500rpm - feed motor power 0.75kW - pneumatic pressure from above and from the sides - spindle diameter 40mm - motor-driven infeed conveyor with a length of 1130mm - manual / automatic control - PLC controller with a touchscreen for easy operation - compressed air connection 8 bar - dust extraction nozzle diameter 150mm - dimensions (L/W/H) 2550x1200x1400mm - weight 1100kg ADVANTAGES - German production - technical documentation (DTR) - machine for tongue-and-groove profiling - complete set of milling cutters and heads included - motor-driven infeed conveyor - unpainted - used machine, very good condition Chjdpfx Ahozrvccemoc Net price: 107900 PLN Net price: 25100 EUR, depending on the exchange rate of 4.3 EUR (Prices may vary with significant exchange rate fluctuations)

Condition: excellent (used), functionality: fully functional, mileage: 34,000 km, power: 219.91 kW (298.99 HP), first registration: 10/2010, fuel type: diesel, overall weight: 14,500 kg, tire condition: 95 %, axle configuration: 4x2, wheelbase: 3,600 mm, next inspection (TÜV): 11/2026, fuel: diesel, color: red, driver cabin: other, gearing type: automatic, suspension: steel, number of seats: 9, total length: 7,750 mm, total width: 2,500 mm, total height: 3,200 mm, Equipment: ABS, additional headlights, airbag, differential lock, fog lights, parking heater, trailer coupling, truck registration, Iveco 160 E HLF 20, superstructure by MAGIRUS AF 3 Road-going 4x2 drive Crew cab for 1 + 8 personnel Rear axle differential lock 2000 l water tank and 150 l foam tank Pump, 2000 l/min, manufactured by MAGIRUS Pneumatic lighting mast at the rear of the superstructure Area lighting Camera system Storage for electrical equipment/lighting PA system storage/backrests in the cab Special paint job, red/yellow Extendable hygiene board Martin fanfare system Front strobe lights Auxiliary heater Electric exterior mirrors Roof storage for extension ladder and 3-part sliding ladder Tool deployment panel Rear warning system Tire chains for rear axle Euro 5 engine One-person hose reel system L/W/H: 8200x2500x3100 mm New inspections (MOT/emission test/safety inspection) available upon request for an additional charge Price available upon written request Sale without any included equipment -Sale only to authorities and businesses- (no sale to private individuals) Cjdpfozx D Nwex Ahmshc Sold as a used vehicle without warranty.

Condition: used, Year of construction: 2015, Agie Charmilles Cut 300 SP Wire-Cut EDM. Serial No. 591.063.002.0159 (2015). Country of Origin: Switzerland Location: These lots are located in Swindon, UK. Unfortunately, there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. Lot 2 of Auction 3505 Chjdpfsz Ar Agsx Ahmjc

Condition: like new (used), functionality: fully functional, Working width: 300mm Manual adjustment of roller spacing Two glue application speed settings Safety switch Chedpfxoz E U E He Ahmsc Mobile design

Condition: new, Year of construction: 2022, Cantilever rack NEW PRODUCT Data: - H: approx. 300 cm - D: approx. 137 cm - L: approx. 402 cm - Cantilever arms: approx. 120 cm - Axle dimension: 131 cm - NEW PRODUCT immediately from stock. - 500 kg load per arm - 2250 kg load per stand - Stand in hot-dip galvanized. - Cantilever arms in hot-dip galvanized. - Arms are screwed. - Arms adjustable in 100 mm increments. - Levels: base + 3 storage levels (4 storage levels) Shelf consists of: - 04 x stands, including base approx. 300 cm made of IPE160. - 12 x cantilever arms approx. 120 cm made of IPE 80 - including all necessary connecting elements and screws. Why BLT cantilever racks? - Certified German manufacturer DIN EN 1090 - Made in Germany - All specified load-bearing capacities of the shelf uprights and cantilevers are statically verifiable, at 100% load. Cjdpfx Aoz Iq Atshmjhc - All shelving systems are supplied in hot-dip galvanized versions. They can therefore be set up inside and outside and do not rust like painted systems. Consistent appearance for many years. - We use the legally required hot-dip galvanized screw sets in accordance with DIN EN 15048-1 - Long availability guarantee - The stand base and stand back are welded together, which provides additional safety and short assembly times because the feet do not have to be screwed to the stand back. - Angle steel braces, so no adjustment using turnbuckles is necessary. This shortens the assembly time. - No slotted hole system, so no weakening of the stand profile. Price: €2265.00 net + legally applicable VAT. You will receive an invoice with VAT shown. Transport: Delivery is carried out by our partner shipping company on request, the costs for this depend on the postcode. Assembly: If required, our trained staff will be happy to assist you with the professional assembly and disassembly of your business equipment. Our recommendation: Let us know what you need... We will be happy to help you with the realization of your projects, from planning to ordering to assembly.

Year of construction: 2010, condition: like new (used), functionality: fully functional, MFT 30/300S Set – Used Professional Equipment Chsdpfx Ajzncrpehmec For sale, a professional set in excellent condition, ready for immediate use. The set includes: MFT 30/300S Big Bag FAS 300 with mobile suction unit This set provides a complete solution, ideal for professionals seeking high-performance, robust, and operational equipment for use in a workshop or on a construction site. Optional: Rapid Vario 70 Primus available as an additional unit for an extra €2,600. The equipment has been carefully maintained, offering excellent value for money compared to new equipment. Sale as a set is preferred.

Condition: excellent (used), Year of construction: 2017, Sub-spindle, Y-axis, C-axis, B-axis FANUC 31i B5 NT-Smart control Turning diameter max 6400 mm Turning length -1150 mm Y-axis +/- 125 mm B-axis 1100 mm Main-spindle speeds 3'500 rpm Sub-spindle speeds 3'500 rpm C-axis positioning accuracy 0.001° Milling head B-axis -120 / +105 ° Spindlespeeds 12'000 rpm Tool changer 120 positions Barloader IRCO ILS-Muk-10016II Workpiece pick-up attachment Tool breakage control device 3D measuring tracer Misc. accessories MARCELS MASCHINEN CH Codpfxezz I N Ts Ahmehc

Condition: good (used), Year of construction: 2013, functionality: fully functional, working width: 300 mm, passage height: 340 mm, Three-sided brush sanding machine / brush machine Manufacturer: Houfek Type: Twingo 300 Year of manufacture: 2013 Working width: 300 mm Chsdpfx Aozg S Nzehmjc Passage height: approx. 340 mm 1x sanding brush unit, vertical, from the left, speed infinitely adjustable 1x sanding brush unit, vertical, from the right, speed infinitely adjustable 2x sanding brush units, horizontal, from above, speed infinitely adjustable Feed rate infinitely adjustable Machine weight: approx. 690 kg Includes various sanding and structuring brushes on a separate pallet.

Condition: used, functionality: fully functional, color channels: CMYK, Weiß, Gloss/Klarlack, Primer, number of print heads: 4, year of last overhaul: 2026, type of input current: AC, input current: 2 A, input voltage: 100 V, Equipment: brochure finisher, documentation/manual, For sale is a Roland VersaUV LEF-300 UV flatbed printer including a BOFA extraction system and a primer configuration. Extensive investment – 4 new original Roland print heads A major advantage of this machine: significant investments have already been made in important components. All 4 print heads have been replaced with new original Roland print heads. In addition, 8 dampers, 4 cap tops, a dust filter, and other maintenance and wear parts have been renewed. A total of €7,227.12 gross was invested in these works, including the four new original print heads, other components, materials, and technician services. The corresponding invoice is available and can, of course, be viewed upon serious interest. Primer configuration Approximately €700 was also invested in reconfiguring the machine for primer application. Instead of a second clear coat/gloss channel, primer is now directly available via the machine. This is particularly interesting for applications where additional surface preparation is required to improve adhesion. The machine is equipped with CMYK/color, white, gloss/clear coat, and primer. BOFA extraction system included The offer also includes a BOFA extraction system. This means that not only the printer itself is offered, but a comprehensively equipped complete package. Inspection & test print possible Especially when purchasing a used professional UV printer, one should be able to personally inspect the machine before buying. Therefore, inspection and test printing on site are expressly possible. The existing invoices and documentation regarding the work carried out and the replacement of the print heads can also be viewed. Why is the printer being sold? I acquired the Roland specifically for my own production and subsequently invested extensively in the machine. However, in practical use, it has become apparent that I need a different production process for my very specific application and my requirements for the final product. Cedpfxsz Eazgj Ahmohc Therefore, I am restructuring this production area and selling the Roland. Location & shipping Location of the machine: 3730 Austria Collection and inspection on site are possible. Alternatively, the machine can be shipped throughout the EU by a forwarding agent. The transport costs depend on the respective destination and can be clarified in advance. Price €16,900 net (negotiable) An interesting complete package for commercial enterprises looking for a Roland VersaUV LEF-300 with four already renewed original Roland print heads, a primer configuration, and a BOFA extraction system. Please feel free to contact me if you are seriously interested. Inspection and test printing are possible by appointment. Weight: 144 kg Input voltage: 100–240 V Frequency: 50/60 Hz Current consumption: 2.1 A Number of phases: 1 φ Printing area: 770 × 330 mm Max. workpiece/media size: 800 × 360 mm Max. object height: 100 mm Max. object weight: 8 kg Printing resolution: max. 1,440 dpi

Condition: used, Year of construction: 2023, operating hours: 489 h, Homag EDGETEQ 300 Chjdpez D U A Aofx Ahmoc The machine will be available from approximately the end of December 2026. For further information about the machine, please see the images or feel free to request it.

Year of construction: 2024, condition: like new (used), Multivac T300 Tray Sealer Multivac T300 tray sealer in new condition, with only 21 production hours. This Multivac T300 is an entry-level automatic tray sealer with many advantages. Thanks to its compact design, this machine is perfect for many production facilities with limited space. This machine is suitable for O2, N2, and CO2. Operate it fully automatically; press start, and the machine does the rest. The machine can be easily set up using the large touchscreen display. The built-in Busch vacuum pump (360 m3/h) delivers fast production cycles, 24/7. The machine will be shipped with 1 tool: Codpfx Ajz H R Ndshmehc Tray size: 230 x 145 mm (VP9 Tray) Manufacturer: Multivac Model: T300 Year: 2024 Production hours: 21 Power: 8.8 kW / 400 V / 50 Hz Vacuum pump: Busch 360 m3/h Gas: O2 / N2 / CO2 Tray size: 230 x 145 mm (VP tray) Machine dimensions (L x W x H): 4,600 x 1,350 x 1,700 mm Machine weight: 1,400 kg.

Condition: excellent (used), Year of construction: 2006, LWB Steinl VCRS-T 300/36 T / Machine like new Year of construction: 2006 Spraying unit: Metering volume: 36 ccm Clamping unit: Clamping force: 30t Ejector: hydraulic Clamping unit: hydraulic Control system: LWB ECO Cjdpjz Iqfnefx Ahmohc Additional equipment: Hydraulic core pull x 1 Control unit with air valve The injection unit is made of bimetal Dimensions: Weight: 3000 kg All offered machines are started by our service technicians before sale. It is possible to obtain a video of technical tests of the selected machine or participate in live technical tests in our company in Łódź. Price: On request

Condition: like new (used), Year of construction: 2023, operating hours: 1 h, functionality: fully functional, machine/vehicle number: 2013-5191, Ultrasonic cleaning system, less than 2 operating hours Chodoxqnqpspfx Ahmjc

Condition: used, functionality: fully functional, Due to an upgrade, we have a control unit for a MAWERA heating system available. The touch panel was replaced 2 years ago. The control unit is in perfect working order. Chsdpfoz Iky Esx Ahmec Price: 400 EUR * 19% VAT

Condition: excellent (used), functionality: fully functional, SLIDING TABLE SAW Carriage length: 1250 mm Scoring unit Saw unit tilts up to 45° Manual saw blade raise and lower Motor power: 2.2 kW SPINDLE MOULDER Spindle diameter: 30 mm Manual spindle raise and lower 2 spindle speeds: 4500/6000 rpm Codpfoz D Ad Ijx Ahmshc SURFACE PLANER-THICKNESSER Working width: 300 mm 3-knife cutterblock Standard knives Table dimensions: 1500x300 mm Thicknesser table: 300x600 mm HORIZONTAL BORING MACHINE 460 kg Year: 2009

Year of construction: 2022, condition: ready for operation (used), overall weight: 1,140 kg, Plastic processing machine manufactured in 2022. This Other AMIS GSE 300/600 features a rotor diameter of 300 mm and a rotor width of 600 mm, designed for high-speed recycling of plastic waste. It has a feed opening of 400 x 590 mm and a throughput rate of approximately 150 – 250 kg/h, depending on material type. If you are looking to get high-quality plastic recycling capabilities, consider the Other AMIS GSE 300/600 machine we have for sale. Contact us for further details. • Rotor diameter: 300 mm Codpfxjz E R Rxs Ahmshc • Rotor width: 600 mm (actual cutting length: 590 mm) • Drive capacity (motor): 11 kW or 15 kW (depending on application) • Feed opening: 400 x 590 mm • Throughput rate: Approx. 150–250 kg/h (material and screen size dependent) • Rotor knives: 3 rows, V-cut geometry (3 x 2 segmented knives) • Stator knives: 2 rows, reversible with dual cutting edges • Standard screen mesh: > 6 mm (interchangeable; multiple sizes available)