Used Grafotronic Fgt Graphic Machinery - Converting for sale (75,907)

Condition: like new (used), Year of construction: 2024, functionality: fully functional, Equipment: documentation/manual, KONICA MINOLTA ACCURIOLABEL 230 Digital Label Printing Press • Manufacturer: Konica Minolta • Model: AccurioLabel 230 • Year of manufacture: 2024 • Machine has been continuously maintained under a service contract _____ TECHNICAL SPECIFICATION Printing System • Digital toner-based label printing system • Resolution: 1,200 × 1,200 dpi × 8 bit • Equivalent image quality up to 1,200 × 3,600 dpi • Maximum print image size: 1,195 × 320 mm • Web width in present configuration: 325 – 333 mm Production Speeds Depending on substrate: • 23.4 m/min • 18.9 m/min • 13.5 m/min • 9.45 m/min The machine has mainly been operated at 13.5 m/min, as the current owner achieved the preferred print quality at this speed. All four production speed levels are available. _____ CONTROLLER • Konica Minolta IC-605B • Integrated controller • Operator screen • Direct PDF printing from USB stick possible • Patlite LR4-PP signal tower _____ Pjdpfx Aiszx Ri Djrjgt UNWINDER / REWINDER The machine is supplied complete with: • Integrated BST web guiding system • BST web guiding at both winding units This provides stable and accurate web transport throughout the production process. _____ OVERPRINT EQUIPMENT The machine is equipped with: • Overprint Kit with impression / registration sensor This allows accurate overprinting onto previously conventionally printed label material, making the machine particularly interesting for hybrid production environments. _____ WEB CLEANING & STATIC CONTROL Included: • Web cleaning system for AccurioLabel • Static Eliminator • SWG-400 antistatic brush These systems support clean substrate handling and reliable production, particularly when processing sensitive label materials. _____ SLITTING EQUIPMENT Included: • Longitudinal crush knife system • 3 pneumatic knives • Knife holders According to the present owner, this equipment has never been used. _____ COMPRESSED AIR EQUIPMENT Included:

Condition: good (used), Year of construction: 2011, • Wohlenberg WB 92 TS cutting machine • Approx. 920 mm cutting width • Programmable control • Large stainless-steel work tables • Side tables • Waste/trim removal system • Conveyor system • Baumann material handling equipment • Baumann unloading equipment • Baumann jogging equipment • 4 cutting knives included The waste disposal/conveyor equipment is stated to date from approximately 2017. _____ BAUMANN PERIPHERAL EQUIPMENT The cutting system is complemented by professional Baumann handling equipment. Baumann Unit – Type BA 3N According to the machine plate: • Manufacturer: Heinrich Baumann • Type: BA 3N • Machine No.: 1322 • Voltage: 400 V / 3N~ • Frequency: 50 Hz • Rated current: 9 A • Power: 3 kW • Stated load: 1,000 N • Made in Germany The exact year is not shown on the visible nameplate. Unloading Equipment The owner states that the unloading unit is approximately 10 years older than the main cutting machine. Jogging Table The owner states that the Baumann jogging equipment is approximately 20 years older than the main cutting machine. These age indications are based on information supplied by the machine owner and should therefore be considered approximate. _____ INCLUDED TOOLING A particularly useful part of the package is the knife set: 4 x cutting knives included This reduces the buyer's initial need for additional cutting tools and provides spare knife capacity for ongoing production. _____ WHY BUY THIS CUTTING LINE? Complete Production Package Instead of purchasing only a stand-alone guillotine, the buyer receives a complete cutting and material-handling solution with peripheral equipment. Proven German Technology Baumann and Wohlenberg equipment is widely used in professional printing and finishing operations and is known for its robust mechanical construction. 920 mm Production Class The 92 cm cutting format is highly versatile and suitable for a wide range of commercial printing, digital printing, bookbinding and finishing applications. Material Handling Included The additional Baumann equipment can significantly improve workflow compared with operating a stand-alone cutting machine. Waste Handling & Conveyors Integrated peripheral systems help reduce manual handling around the cutting process and improve production organization. Pgedpfx Aisz Ei D Dsret Four Knives Included _____ SUITABLE APPLICATIONS The system can be used for: • Commercial print finishing • Digital print finishing • Bookbinding • Brochures and catalogues • Sheet cutting • Printed paper • Cardboard and light board applications • Short- and medium-run finishing • General post-press production _____ FGT VALUE – MORE THAN JUST A MACHINE Purchasing used graphic machinery internationally involves more than simply buying equipment. FGT Graphic Machinery can support the complete project from inspection through delivery. Our services can include: • Technical machine evaluation • Inspection coordination • Machine demonstration • Professional dismantling • Preparation for transport • Packing • Loading • International truck transport • Sea freight • Export documentation • Customs preparation • Installation coordination • Technical support _____

Condition: like new (used), Year of construction: 2024, functionality: fully functional, Mark Andy Digital Pro3 PLUS Hybrid Digital Printing Machine with Semi-Rotary Die-Cutting Unit Installation: April 2024 Running meters: approx. 96,000 linear meters from April 2024 to April 2026 Web width: 330 mm Digital print width: max. 318 mm Flexo print width: max. 330 mm Digital resolution: 1200 x 1200 dpi Digital printing speed: approx. 23.5 m/min Digital printing: 4 colors Flexo printing: 2 flexo units Flexo drying: air-cooled LED UV Materials: BOPP, PET, PP, paper Digital Front End / RIP: PDF workflow Power supply: 240 V, 50–60 Hz Pgodpfey Ul I Ajx Airet Configuration and equipment: Mark Andy Digital Pro3 PLUS hybrid digital press 2 flexo printing units Semi-rotary die-cutting unit Latest generation flexo printing stations Semi-rotary die-cutting, expandable Unwinder for laminate / KP available Bypass for “flexo only” production or blank labels available Rewinding system Air-cooled LED UV drying PDF digital workflow Suitable for roll-to-roll label production Accessories included: 2 x printing cylinders: 80Z and 96Z 1 x Spilker Airboy Further accessories according to final confirmation Technical highlights: The machine offers a strong combination of digital printing, flexographic printing, and semi-rotary die-cutting in one compact production line. The uploaded technical specification confirms a maximum web width of 330 mm, a digital print width of 318 mm, 1200 x 1200 dpi resolution, and a digital production speed of 23.5 m/min. The layout drawing shows a complete production concept with unwind, semi-rotary die-cutting section, print station, digital engine, and rewind system, making the machine suitable for efficient short-run and medium-run label production.

Condition: good (used), Year of construction: 2013, functionality: fully functional, 9 colors Flexographic printing Pgodoz Daaajpfx Airjt UV curing Lamination Reversible Tooling Embossing Rewinder Unwinder etc.

Condition: good (used), Year of construction: 2010, functionality: fully functional, GALLUS TCS 250 High-End Combination Label Printing Press Manufacturer: Gallus Model: TCS 250 Year of manufacture: 2010 Printing Configuration 8 Printing Units in total: • 6 x Offset Printing Units • 1 x Rotary Screen Printing Unit • 1 x Flexographic Printing Unit Additionally: • 1 x Flexographic Varnishing / Coating Station _____ MACHINE CONFIGURATION Printing Technology The machine combines three different printing technologies within one production line: 6 x Offset Ideal for: • High-resolution graphics • Fine text • Excellent halftone reproduction • Premium label applications • High-quality process colour printing 1 x Rotary Screen Printing Especially suitable for: • High-opacity colours • Opaque white • Special varnishes • Tactile effects • Functional coatings • Premium decorative applications 1 x Flexographic Printing Unit Provides additional flexibility for: • Spot colours • Solid colours • Varnishes • Coatings • Special applications _____ FLEXO VARNISHING STATION The machine is additionally equipped with a dedicated: Flexographic Varnishing / Coating Station Pgodezww Rrepfx Airot Suitable for applications such as: • Full-area varnishing • Protective varnish • Gloss varnish • Matte varnish • Special coatings This provides additional finishing possibilities directly in-line. _____ UV DRYING SYSTEM The machine is equipped with an integrated: UV Drying System The UV curing system allows fast and efficient curing directly after printing and coating. This supports high-quality production on a wide variety of label substrates. _____ CORONA TREATMENT Included: Corona Treatment Unit The Corona system improves surface tension and therefore ink and coating adhesion, particularly on filmic and non-absorbent substrates. _____ WEB GUIDING The machine is equipped with: Automatic Web Edge / Web Guiding System This ensures stable and accurate web transport throughout the complete printing and finishing process.

Year of construction: 2007, condition: good (used), functionality: fully functional, Printing and Coating • 5 letterpress printing units • 1 additional varnishing unit • UV drying system • Inline varnishing capability Pjdpeztqlzefx Airjgt • Suitable for high-quality label and packaging applications • Precise reproduction of fine text, barcodes, screens and detailed graphics Web Handling • Unwinding unit • Rewinding unit • Automatic web-guiding system • Corona treatment system • Stable and controlled web transport throughout the complete production process Laminating and Converting • Inline laminating unit • Suitable for the production of laminated and multilayer labels • Laminating section can be used independently • Separate operation possible together with one printing unit • Machine can therefore also be used as a dedicated converting and finishing line Die-Cutting and Finishing • Semi-rotary die-cutting unit • Slitting unit • Perforation unit • Inline converting and finishing capability • Flexible processing of different label formats and repeat lengths Quality Control • Camera inspection system • Continuous monitoring of print quality and web registration • Improved production control • Reduction of production waste and defective material _____ WHY THIS VIVA CODIMAG 340? • High-Quality Letterpress Printing The letterpress printing process provides sharp text, clean lines, strong color coverage and precise reproduction of small details. This makes the machine especially suitable for self-adhesive labels, pharmaceutical labels, cosmetic labels, food labels, barcode applications and other demanding narrow-web products. • Five Printing Units Plus Varnishing The machine is equipped with five letterpress printing units and one separate varnishing unit. This configuration allows multi-color labels to be printed and subsequently protected or visually enhanced with a varnish in one continuous production process. • Independent Converting Capability One of the most important advantages of this machine is the flexible configuration of the laminating and converting section. This section can be operated separately together with one printing unit, allowing the machine to be used as a dedicated converting line for: • Laminating • Varnishing • Die-cutting • Slitting • Perforating • Rewinding This provides additional production capacity even when the complete printing section is not required. • Inline Laminating Unit The integrated laminating unit enables the production of protected, multilayer or enhanced label products. Laminating increases the durability of the finished label and can improve resistance against moisture, chemicals, abrasion and mechanical stress. • Semi-Rotary Die-Cutting The semi-rotary die-cutting unit provides flexibility for different label formats and repeat lengths. It is particularly suitable for short and medium production runs where frequent job changes and flexible format handling are important. • Complete Inline Production Printing, varnishing, laminating, die-cutting, perforating, slitting and rewinding can be completed within one production line. This reduces material handling, minimizes intermediate production stages and improves overall production efficiency. • UV Drying Technology The UV drying system enables immediate curing of inks and varnishes. This supports high-quality production, stable print results and direct further processing of the printed material within the machine.

Condition: good (used), Year of construction: 2011, functionality: fully functional, Manufacturer: OMET S.r.l., Italy Model: MP Advanced Machine Type: Flexographic Plate Mounter Year: 2011 Serial No.: 1487 MPA Working Width: approx. 430 mm Condition: Good used condition FGT Condition Rating: ★★★★★☆☆ 8/10 Availability: Immediately available Why this machine is interesting The OMET MP Advanced is designed for accurate and repeatable mounting of flexographic printing plates. Its dual-camera positioning system supports precise register preparation and can significantly reduce press setup time, start-up waste, and register corrections. This is a particularly attractive solution for narrow-web label and packaging printers looking to improve efficiency through offline plate preparation. Main Configuration • Dual-camera positioning system • Two independently adjustable camera units • Central operator monitor • Digital position displays • Precision linear camera movement • Plate cylinder mounting section • Mechanical cylinder support system • Adjustable positioning components • Robust industrial machine frame • CE marked Pgodpfjzkawuex Airot Suitable Applications Ideal for: • Self-adhesive labels • Paper and film labels • Flexible packaging • Multi-color flexographic printing • Narrow-web converting applications Main Benefits • Accurate plate positioning • Improved register repeatability • Faster job preparation • Reduced press downtime • Lower start-up waste • Offline cylinder preparation • Reduced operator-dependent mounting errors Scope of Supply • OMET MP Advanced plate mounter • Dual-camera system • Central monitor • Digital positioning displays • Cylinder mounting and support section • Standard equipment as installed Additional adapters, sleeves, cylinders, or tooling are subject to separate confirmation.

Year of construction: 2006, condition: good (used), functionality: fully functional, VIVA CODIMAG 340 Pedpfxoztqi He Airogt 5-COLOR OFFSET LABEL PRINTING PRESS WITH VARNISHING AND HOT-FOIL STAMPING We are pleased to offer the following well-equipped VIVA CODIMAG 340, designed for the high-quality production and finishing of premium labels. The machine combines five offset printing units with an additional varnishing unit, hot-foil stamping, semi-rotary die-cutting, and inline finishing equipment. Its versatile configuration makes it particularly suitable for wine and spirits labels, cosmetics, food labels, and other demanding applications requiring precise printing and decorative finishing. _____ MACHINE DETAILS Manufacturer: Codimag Model: VIVA 340 Year of manufacture: 2006 Web width: 340 mm Printing process: Offset printing Printing units: 5 offset printing units Additional unit: 1 varnishing unit Availability: By arrangement • 1 additional varnishing unit • UV drying system • Inline varnishing capability • Suitable for high-quality label and packaging applications • Precise reproduction of fine text, screens, and detailed graphics Web Handling • Unwinding unit • Rewinding unit • Automatic web-guiding system • Corona treatment system • Stable web transport throughout the complete production process Decorative Finishing • Hot-foil stamping unit • Hot-stamping equipment • Suitable for metallic, decorative, and premium finishing effects • Inline enhancement of labels without requiring a separate finishing process Converting Equipment • Semi-rotary die-cutting unit • Slitting unit • Perforation unit • Inline converting and finishing capability Quality Control • Camera inspection system • Continuous monitoring of print quality and web registration • Improved production control and reduction of waste _____ WHY THIS VIVA CODIMAG 340? • Premium Offset Printing Quality The offset printing process is particularly suitable for applications requiring sharp details, fine screens, smooth gradients, and high-quality color reproduction. This makes the machine an attractive solution for premium labels in industries such as wine and spirits, cosmetics, pharmaceuticals, and specialty food products. • Five Printing Units Plus Varnishing The machine is equipped with five offset printing units and one separate varnishing unit. This configuration allows multi-color labels to be printed and protected or visually enhanced with a varnish in one production process. • Integrated Hot-Foil Stamping The hot-foil stamping equipment enables metallic and decorative effects to be applied directly inline. This adds significant value to premium labels and reduces the need for a separate offline finishing process. • Complete Inline Production Printing, varnishing, hot-foil stamping, die-cutting, perforating, slitting, and rewinding can be carried out within one production line. This reduces material handling, shortens production times, and improves overall production efficiency. • Semi-Rotary Die-Cutting The semi-rotary die-cutting unit offers flexibility for different label formats and repeat lengths. It is particularly advantageous for short and medium production runs, where frequent job changes and flexible format handling are important. • Integrated Corona Treatment The corona treatment system improves the surface tension of the material and supports better adhesion of inks, varnishes, and coatings on a wide range of substrates.

Condition: good (used), Year of construction: 2001, functionality: fully functional, TECHNICAL CONFIGURATION Printing and Drying • 6 flexographic printing units • UV drying system • Hot-air drying system • Combination of UV and water-based ink applications possible, depending on production requirements • Varnishing capability Web Handling • Unwinding unit • Rewinding unit • Automatic web-guiding system • Corona treatment system • Adjustable turn bar system • Turn bar can be positioned flexibly between the individual printing units Converting Equipment • 2 rotary die-cutting stations • 1 die-cutting station equipped with a gap system • Slitting unit • Perforation unit • Inline finishing and converting capability Quality Control • Camera inspection system • Continuous monitoring of print quality and web registration during production Included Accessories The machine is offered together with a selection of production accessories, including: • Magnetic cylinders • Printing cylinders • Anilox rollers Psdpfxsztqcmj Airogt A detailed accessory list can be provided upon request. _____ WHY THIS GALLUS EM 280?  Complete Inline Production Solution The machine combines printing, varnishing, die-cutting, perforating, and slitting in one production line. This allows finished labels to be produced in a single pass and reduces additional handling between production stages.  Flexible Six-Color Configuration The six flexographic printing units provide sufficient color capacity for a wide range of standard and premium label applications. The additional varnishing capability enables protective or decorative surface finishing.  UV and Hot-Air Drying The combination of UV and hot-air drying increases production flexibility and allows the machine to process different ink and coating systems.  Flexible Turn Bar System The adjustable turn bar can be positioned between different printing units. This offers additional flexibility for reverse-side printing, adhesive-side printing, and special multilayer label applications.  Two Rotary Die-Cutting Stations The two rotary die-cutting stations allow more complex converting operations to be carried out inline. One station is equipped with a gap system for improved adjustment and production accuracy.  Integrated Quality Inspection The camera inspection system supports continuous quality control during production and helps minimize waste caused by printing or registration errors.  Proven Gallus Engineering The GALLUS EM 280 is known for its mechanical stability, long service life, and straightforward operation. It remains a reliable production platform for medium-sized label converters, specialist applications, and international export markets. Very Well-Maintained Condition The machine is located in Germany and has been maintained in very good overall condition. Based on the available information, we rate the machine at approximately: Condition: ★★★★★☆☆ 8 out of 10 stars.

Year of construction: 2011, condition: like new (used),  Year of manufacture: 2011  Servo drive  Job memory up to 50 jobs  Register control: Semi- and fully rotary  electronic motor control  Electronic web edge control  Waste and misprint stop  Unwind shaft: d=76mm  Unwind diameter: 700mm  Rewind shaft: d=76mm  Rewind diameter: 550mm  Automatic web stop at machine stop  Flexo printing unit GALLUS EM 340  Web width: 340mmm  Cliché 1.14mm  Fully rotary register control including servo drive  Die-cutting and printing of materials  UV drying Psdpfx Aopyg Tbsirjgt  Web width: 410mm  Laminating  Pressure station mounted on printing cylinder  Punching unit LeoMat L  Adaptation of the GALLUS R250 magnetic cylinder  Rotometrics impression cylinder  Grid rewind servo driven  Integrated edge trim suction  Including fully rotative register control

Year of construction: 2008, condition: new, GALLUS EM 510 S - 5 color UV-FLEXO Machine information: The Gallus 510 S can be used to produce self-adhesive and monofoil labels as well as a wide range of other products. A state-of-the-art servo-driven web-feed system ensures optimum cost-effectiveness and superb quality results. Combined with the unique platform concept and the consistent modular design, these machines are a secure investment in your success - both now and in the future. Specifications:  Brand / type: GALLUS / 510S /Servo driven - like new!!!  Age : 2008 - like new  Counter : Only 9.424 hour/runs  Webwidth : 510mm  5 x Flexo Units  5 x U-Dryer  BST Power Scope 300 (Web monitoring system)  Unwinder max.: 1250mm  Rewinder max.: 1250mm  Lamination/Cold foil  Turnbar Psdpfx Asquvidsirjgt  Remailing 24"  Ben Bunch 500  Cross Cutting Cylinder  punching units (length: 12" - 26")  good condition - like new!!!  Unwind Capacity 1250 mm  Rewind Capacity 40 inch - 1250 mm Description: Now you can have it all - reliable performance, exceptional efficiencies and superior quality - at a great value. The Performance Series P3 model is a modular platform that can be configured to support a variety of conventional pressure sensitive applications. Technical- and optical condition: Technical: 9/10 (checked and in excellent running condition) Optical: 9/10 (cleaned and can go to end-user directly)

Year of construction: 2018, condition: good (used), PRATI NEW SATURN TE 370 Machine type: Inspection / Slitting / Rewinding / Die-Cutting Machine Working width: max. 370 mm Maximum material width: 390 mm Minimum material width: 80 mm Maximum speed: up to 300 m/min, depending on material Electrical connection: 3 x 400 V + N / 50 Hz Compressed air: 6 bar constant _____ UNWINDING SYSTEM The machine is equipped with a professional servo-controlled unwinding system including: • Pneumatic fixed unwinding shaft Ø 76 mm • Brushless servo motor • Maximum unwind roll diameter 850 mm • Automatic roll-end detection with machine deceleration and stop • Electronic web tension control • Closed-loop tension control via dancer roller • Movable splice table with pneumatic clamps The closed-loop system ensures stable web tension even during acceleration and deceleration. Pgsdpfxsz Ea Ito Airet _____ WEB GUIDING BST Web Guiding System • Electronic web edge control • Ultrasonic sensor • Also suitable for transparent materials • Professional BST web guiding system Important: The BST TubeScan camera inspection system is NOT included in the machine. _____ INSPECTION / CORRECTION AREA The machine offers a dedicated working area for operator inspection and correction of defective material. • Inspection / correction table • Working area length approx. 655 mm • Forward and reverse operation This allows the operator to identify and correct defective sections before rewinding the finished roll. _____ MAIN DRIVE The PRATI SATURN uses modern servo technology for precise material handling: • Brushless servo drive • Electronic speed control • Electronic position and torque control • Specially coated pull roller • Pneumatic pressure roller • Controlled web acceleration and deceleration • Forward and reverse operation The system is designed to minimize material slippage and maintain accurate web transport during production. _____ SLITTING UNIT Professional slitting equipment including: • Removable knife shaft cassette • Removable upper knife shaft • Minimum slitting width approx. 13 mm • Upper and lower knives • Pneumatically controlled pressure roller after the slitting section _____ DIE-CUTTING CAPABILITY The machine configuration provides a professional platform for rotary die-cutting applications. According to the original machine specification: • Maximum die-cutting material width: 450 mm • Standard die size up to 14.5" • Minimum die size 12" • Matrix waste rewinding capability • Maximum matrix waste roll diameter approx.

Condition: good (used), Year of construction: 2006, functionality: fully functional, working width: 330 mm, MPS Model: EF 330/8 Year of manufacture: 2006 Printing technology: UV Flexographic Printing Number of printing units: 8 colors Web width: 330 mm class Application: Labels / self-adhesive materials / film applications Condition: Very good operational condition Production status: Currently in daily production _____ PRINTING CONFIGURATION 8 x Flexographic Printing Units The machine is equipped with eight flexographic printing stations and offers a highly flexible production platform for professional label production. Suitable applications include: • Process color printing • Spot colors • Varnishes • Special coatings • Paper labels • Film labels Pedszzym Repfx Airogt • Self-adhesive materials • Front-side printing • Reverse-side printing • Multi-process label applications _____ GEW UV DRYING SYSTEM The machine is equipped with a professional GEW UV curing system. The installed GEW UV technology provides reliable curing performance for UV flexographic inks and varnishes and is well-established in industrial label production. The dedicated GEW UV power supply units are installed together with the press and form part of the existing production setup. _____ EXTENSIVE INLINE CONFIGURATION This MPS EF 330/8 is not simply a basic 8-color flexographic press. Its extensive web path and additional inline modules provide a high level of flexibility for demanding label applications. The current configuration includes: • 8 flexographic printing stations • GEW UV curing system • Unwinding and rewinding system • Web cleaning system • Corona treatment system • Web guiding system • Turn bar / reverse-side printing capability • Inline lamination station • Rotary converting / die-cutting section • Longitudinal slitting equipment • Web / print inspection system • Electronic machine control • Extensive exhaust and extraction system • Safety systems and emergency stops This configuration makes the press suitable for both standard self-adhesive label production and more complex multi-process applications. _____ TURN BAR / REVERSE-SIDE PRINTING A major advantage of this machine is the integrated turn bar and web turning configuration. This allows the material web to be turned during production and enables printing or processing on the reverse side of the substrate. This functionality is particularly useful for: • Backside printing • Multi-layer labels • Peel & reveal constructions • Promotional labels • Technical labels • Special label applications _____ INLINE LAMINATION _____ WEB & PRINT INSPECTION _____ OPERATIONAL STATUS The machine is: ✓ Fully functional ✓ Currently in daily production ✓ Complete and professionally installed ✓ Available for inspection under production conditions ✓ Supplied with extensive tooling ✓ Suitable for professional label production A production test can be organized by prior appointment. _____ CONDITION Technical Condition ★★★★★☆☆ – 8 / 10 Overall Maintained Condition ★★★★★☆☆ – 8 / 10

Condition: good (used), Year of construction: 1997, functionality: fully functional, Technical Offer – Gallus EM 410 S Manufacturer: Gallus Ferd. Rüesch AG / Arsoma Druckmaschinen GmbH Model: Gallus EM 410 S Year: 1997 Incoterm: FCA FGT Condition Rating: ★★★★★☆☆ (8/10) _____ Why this machine is interesting The Gallus EM 410 S is one of the most successful servo-driven UV flexographic presses ever built for the narrow web label industry. Thanks to its modular design, high production speed, and comprehensive inline converting equipment, it is perfectly suited for self-adhesive labels, flexible packaging, filmic materials, and premium label applications. Delivered complete with printing cylinders, anilox rolls, and magnetic cylinders, the machine offers an excellent opportunity to start production immediately while significantly reducing tooling investment. _____ Technical Specification • 8 UV Flexographic Printing Units • Web Width: 410 mm • Maximum Printing Width: 410 mm • Mechanical Speed: Up to 150 m/min • Print Repeat: Approx. 254–648 mm (depending on cylinders) • UV Flexo Printing (Front & Reverse) • Servo-Driven Technology • Electrical Supply: 400 V / 50–60 Hz / 3 Phase / 80 A Web Handling • Unwinder for rolls up to 800–1,000 mm • Maximum Unwind Diameter: 1,000–1,250 mm • Double Rewinder • Maximum Rewind Diameter: 800–1,250 mm • Automatic Electronic Web Guide (E&L or equivalent) Drying & Finishing • IST Metz UV Drying System • Corona Treatment • Teknek Web Cleaning System • Turnbar System • 2 Rotary Die-Cutting Stations with GapMaster • Inline Laminating Unit Quality Control • SES SensoTec Register Control System • Register Accuracy: ±0.1 mm • OkiSystem Sentinel Defect Detection System Printable Materials • Paper • PE Films • PP Films • PET Films • Self-Adhesive Materials • Lightweight Carton _____ Included Equipment • Complete set of Printing Cylinders • Complete set of Anilox Rolls • Magnetic Cylinders • Automatic Web Guide • Turnbar • Corona Treater • Teknek Web Cleaner • 2 × Rotary Die-Cutting Stations with GapMaster • Inline Laminating • IST Metz Multi-Lamp UV System • Double Rewinder • Register Control Pjdpfx Asznwhrjirsgt • Defect Detection System _____ Main Advantages • Proven Gallus servo-driven technology • High production speed up to 150 m/min • Complete inline converting configuration • Extensive tooling package included • Modular platform compatible with Gallus EM 260 / EM 410 / EM 510 • Ready for immediate production with minimal additional investment _____ The machine can be inspected while running. Should you require further information, additional photographs, or wish to arrange an inspection, please do not hesitate to contact us. We look forward to hearing from you.

Condition: good (used), Year of construction: 2019, Manufacturer: INK SYSTEMS Model: Soft Sonic IS Compact 1300 Hybrid Machine Type: Hybrid Ultrasonic Anilox Roller Cleaning System Year: 2018 Maximum Working Length: approx. 1,300 mm Condition: Good used condition FGT Condition Rating: 8/10 Availability: Subject to prior sale Why this machine is of interest Clean anilox rollers are essential for stable ink transfer, consistent color density, and reproducible flexographic print quality. The IS Compact 1300 Hybrid is designed for professional and efficient cleaning of anilox rollers. Its hybrid cleaning concept offers an attractive solution for label and packaging printers seeking to remove dried ink residues and contamination from engraved anilox cells while reducing manual cleaning effort. For a flexographic printing company, this can directly support: more consistent ink transfer, improved print quality, recovery of effective anilox cell volume, reduced manual cleaning time, longer service life of valuable anilox rollers. Main Technical Data & Configuration Professional anilox roller cleaning system Hybrid cleaning technology Ultrasonic cleaning principle Suitable for anilox rollers up to approx. 1,300 mm Controlled cleaning process Designed for professional industrial use Suitable for regular maintenance cleaning Compact machine design Closed cleaning concept Year of manufacture: 2018 Suitable Applications Ideal for: Label printing companies Narrow- and mid-web flexographic printers Flexible packaging production Folding carton applications Pgodpfozmhbgjx Airst Industrial flexographic printing Regular maintenance of anilox rollers

Condition: good (used), Year of construction: 2021, Manufacturer: Duplo Model: PFi Blade B3+ Year: 2021 Incoterm: FCA, Germany (free loaded onto truck) FGT Condition Rating: ★★★★★☆ (9/10) Pgedpfx Ajznun Asirst _____ Why this machine is interesting The Duplo PFi Blade B3+ is a compact and highly versatile digital cutting table designed for short-run and on-demand production. It combines cutting, kiss-cutting, and creasing in a single operation, making it ideal for packaging prototypes, labels, greeting cards, folding cartons, and digital print finishing without the need for conventional dies. Its CCD camera registration system ensures excellent accuracy, while the automatic feeder allows for efficient unattended production. _____ Technical Data • Working size: 210 × 297 mm up to 400 × 600 mm • Material thickness: up to 1.3 mm • Paper weight: 120 – 400 g/m² (depending on application) • Cutting speed: up to 800 mm/sec • Cutting accuracy: ± 0.3 mm • Tungsten steel cutting blades • 3 tool heads: Cutting, Kiss-Cut, and Creasing • CCD camera registration system • Automatic pile feeder with 5 combined suction heads • Feeder capacity: 100 mm • Power supply: 220 V / 50 Hz / 20 A • Connected load: 4 kW • Dimensions (L × W × H): 2,540 × 810 × 1,060 mm _____ Included Equipment • PC with monitor, keyboard, and mouse • Cutting and control software • Permanent transferable software license • CCD camera registration system • Three tool heads (Cutting, Kiss-Cut, and Creasing) • Complete tool holders and accessories • Assorted spare blades • Operating manual and technical documentation • Data backup available • Separate vacuum table compressor included _____ Availability • Immediately available • Machine under power • Demonstration possible by appointment _____

Year of construction: 1998, condition: good (used), functionality: fully functional, Nilpeter Model: F3000 Machine No.: F-2002 Year of manufacture: Approx. 1994–1998 Please note: The exact year cannot currently be confirmed due to a damaged machine identification plate. Printing process: Flexographic printing + Screen printing Flexographic printing units: 5 Screen-printing units: 2 Availability: By arrangement _____ TECHNICAL CONFIGURATION Printing Units • 5 flexographic printing units • 2 screen-printing units • Combination of flexographic and screen printing within one production line • Suitable for standard as well as specialty label applications • Possibility to apply high-opacity inks, whites, and special effects through the screen-printing units _____ Drying System • 5 UV drying units • 5 hot-air drying units • Combination of UV-curable and water-based ink applications possible, depending on substrate and production requirements • Flexible drying configuration for different materials and coating applications _____ Web Handling • Unwinding section • Web transport through the complete production line • Turnbar system • Delamination / relamination system • Suitable for reverse-side printing and multilayer label applications • Stable web handling throughout the production process _____ Laminating Section • Integrated laminating unit • Suitable for protective lamination • Suitable for multilayer label structures • Allows inline finishing without the need for a separate laminating machine _____ DIE-CUTTING AND CONVERTING The machine is equipped with an extensive converting section: • 3 rotary die-cutting stations • 1 additional die-cutting station for sheet delivery • Integrated sheet delivery • Suitable for multiple cutting, perforating, and converting operations • Flexible configuration for different label and converting applications _____ SHEET DELIVERY • Integrated sheet delivery system • Additional die-cutting station dedicated to sheet production • Enables the machine to produce both roll-to-roll and roll-to-sheet products • Additional flexibility for specialty applications _____ INCLUDED ACCESSORIES The machine is supplied with a considerable quantity of production tooling and accessories. Magnetic Cylinders • 10 magnetic cylinders Anilox Rollers • 21 anilox rollers Printing and Rubber Rollers • 5 rubber rollers • 10 printing rollers Additional Tooling Pgodpsztqrnefx Airet • Various additional cylinders • 1 new slitting cylinder • Further tooling available with the machine The extensive tooling package significantly reduces the need for additional investment and supports a faster production start after installation. _____

Year of construction: 1996, condition: good (used), functionality: fully functional, GALLUS T 180 SCREEN AND LETTERPRESS LABEL PRINTING MACHINE WITH HOT-FOIL STAMPING, EMBOSSING, AND FLATBED DIE-CUTTING We are pleased to offer the following versatile GALLUS T 180, designed for the production and finishing of high-quality narrow-web labels. The machine combines three screen-printing units with one letterpress printing unit, UV curing, hot-foil stamping, embossing, and flatbed die-cutting. Thanks to the integrated unwinding and rewinding system, finished rolls can be produced directly within the machine in one complete production process. _____ MACHINE DETAILS Manufacturer: Gallus Model: T 180 Year of manufacture: 1996 Web width: 180 mm Printing processes: Screen printing and letterpress printing Printing units: 3 screen-printing units and 1 letterpress unit Availability: By arrangement _____ TECHNICAL CONFIGURATION Printing Units • 3 screen-printing units • 1 letterpress printing unit • Suitable for high-opacity inks, solid colors, and detailed print applications • Combination of screen and letterpress printing within one production line Drying System • UV curing system • Immediate curing of inks and varnishes • Suitable for direct inline finishing and further processing Varnishing • Varnishing capability within the letterpress printing unit • Suitable for protective and decorative varnish applications Pgedpfx Asztqp Toirjt • Inline finishing without the need for an additional standalone varnishing machine Decorative Finishing • Hot-foil stamping unit • Embossing capability • Suitable for metallic, decorative, and tactile finishing effects • Particularly attractive for premium and specialty label applications Web Handling • Unwinding unit • Rewinding unit • Controlled material transport throughout the complete production process • Finished rolls can be produced directly in the machine Die-Cutting • Flatbed die-cutting unit • Suitable for precise die-cutting of different label shapes and materials • Inline production from raw material to finished rolls _____

Condition: good (used), MARK ANDY XP 5000 / 13" Podpfx Aijtubz Aorjgt  Year: 2008  Webwidth: 330mm / 13" Equipment:  UNWINDER  7 x FLEXO PRINTING  Add. 1 x WATER COOLING  2 x DIE-CUTTING  LABELSHIFTER  BST CAMERA  UV-DRYER  REWINDER  Web edge Control  Control Panel  Optican for Sheeter  Lot off Printing/Magnetic Cylinder  Anilox

Condition: good (used), Year of construction: 1995, Gallus R200B Manufacturer: Gallus Ferd. Rüesch AG, Switzerland Model: Gallus R200B Year: 1995 Configuration: 8-Color UV Letterpress Incoterm: FCA (Free Loaded on Truck) FGT Condition Rating: ★★★★★☆☆ (8/10) _____ Why this machine is of interest The Gallus R200B has earned an outstanding reputation within the label industry thanks to its robust Swiss engineering, exceptional print quality, and long service life. Even today, it remains a highly reliable production press for self-adhesive labels and specialty applications. A particular highlight of this machine is its extensive package of original Gallus tooling, including a large quantity of printing cylinders, anilox rollers, magnetic cylinders, and die-cutting cylinders. This significantly reduces the investment required for a new owner while providing maximum production flexibility from day one. Psdpfxsznwqge Airogt _____ Technical Specification • 8 UV Letterpress Printing Units • Approx. 200 mm Web Width • UV Drying System • Automatic Unwinder • Automatic Rewinder • Rotary Die-Cutting Station • Matrix Removal System • Automatic Web Guide • Electronic Register Control • Touch Screen Operator Panel • Gallus Ink Control System • Pneumatic Web Tension Control • Calvatron Corona Treatment System • Complete Electrical Cabinet • Operator Platform _____ Included Tooling & Accessories • Extensive package of Printing Cylinders • Large quantity of Anilox Rollers • Large selection of Magnetic Cylinders • Numerous Rotary Die-Cutting Cylinders • Various Repeat Sizes • Tooling Storage Racks • Spare Tooling • Ink Roller Storage Rack • Electrical Cabinet • Corona Treatment Unit • Operator Platform _____ Main Advantages ✔ Proven Swiss Gallus engineering ✔ 8-color UV letterpress configuration ✔ Excellent print quality for self-adhesive labels ✔ Extensive original tooling package included ✔ Immediate production capability ✔ Reliable mechanical construction with low maintenance costs ✔ Excellent availability of spare parts ✔ Ideal machine for label converters seeking a cost-effective production solution _____

Year of construction: 1998, condition: good (used), ROTOFLEX R 1300 Slitter / Rewinder Specifications:  Age: 1997  Width : 13" (330mm)  Unwind shaft diameter: 76mm Pgjdpeq T Schefx Airjt  Rewind shaft diameter: 76mm, 50mm, 40mm  Location : Germany Technical- and optical condition: Technical: 8/10 (checked and in excellent running condition) Optical: 8/10 (cleaned and can go to end-user directly)

Condition: like new (used), Year of construction: 2019, 3 x XEROX NUVERA 314 ➢ Type: Digitalprinting ➢ Manufacturer: XEROX ➢ Model: NUVERA 314 Pgjdpjr Hcivefx Airet ➢ Year of construction: 2 x 12-2019 / 1 x 2016 ➢ Counter: 40mio / 42mio / 58mio ➢ Reference Number: FGT 25-141 ➢ Rated speed: 314 ipm ➢ ➢ Resolution: 4800 x 600 dpi ➢ Paper Size: Min: 5.5″ x 8″, Max: 12.6″ x 19.3″ ➢ Paperweight: 44 gsm - 300 gsm

Condition: good (used), Year of construction: 2010, functionality: fully functional, OMET FlexyServo 330 mm Year of manufacture: 2010 Printing process: Servo-driven UV flexo Condition: Used – excellent condition Location: Europe Pgjdpfeyyn Rwex Airot _____ Machine Configuration • 6 x UV flexo printing units • 6 x GEW UV drying units • Double die-cutting stations • 1 x Gap Master system • Turn bar (web turner) • Sheet-off unit with additional die-cutting station • Suitable for adhesive label production _____ Equipment & Tooling • 6 sets of tooling • 6 anilox rollers • 3 magnetic cylinders (currently in production) _____ Technical Highlights & Advantages This OMET FlexyServo is a modern servo-driven flexo press offering excellent register accuracy and efficient production performance. Key advantages: • Servo technology for high precision and reduced waste • Strong UV drying system (GEW) • Flexible configuration with multiple die-cutting options • Well-maintained machine in excellent condition • Immediate availability with testing possible This machine is ideal for converters looking for a reliable and efficient narrow web solution. _____

Condition: good (used), Year of construction: 2013, MARK ANDY XP 5000 / 13" - 4-color  Year: 2013  Webwidth: 330mm / 13" Pedpfxotubz Uo Airogt Equipment:  UNWINDER  4 x FLEXO PRINTING  BST CAMERA  UV-DRYER  HOT AIR  1 x DIE-CUTTING GAPMASTER  1 x DIECUTTING GAPMASTER  100% TUBE SCAN CONTROL  REWINDER  Web edge control  Control Panel  Lot off printing/magnetic cylinder  Anilox Please contact me if you have any questions. Technical- and optical condition: Technical: 9/10 (checked and in excellent running condition) Optical: 9/10 (cleaned and can go to end-user directly)

Condition: good (used), MPS EF 410 - 8 color Label Printing Machine Ref.: FGT 25-230 We are pleased to present this 2008 MPS EF 410 - a high-precision, versatile UV flexo press designed for a wide range of applications. The MPS EF 410 model is a servo-driven, 410mm wide, multi-substrate press, capable of running self-adhesive materials as well as unsupported plastic films. With robust features and premium components, this machine is engineered for reliable, high-quality production. _____ Key Specifications & Configuration - Printing Width: 410 mm - Technology: Servo-driven UV flexo press - Substrate Handling: Spiral rollers and chill drums for multi-substrate versatility _____ Machine Features - Unwind Unit with Lift - Web Guide & Splice Table - Teknek Web Cleaner - 8 Flexo Printing Units for optimal color flexibility - Automatic Registration Control ensuring precise alignment Podpfx Aju Rdgbsirsgt - Delam/Relam with Web Turn Bars - enables printing of 2 colors on reverse side - Anti-Static Bars across the web path - 9 GEW UV Dryers providing efficient curing _____ Enhanced Finishing Capabilities - Full Rail System allowing for tool movement along the press - Overlamination/Cold Foil with UV drying for premium effects - Double Die Station: o 1 x K&B Gapmaster Die for advanced control o 1 x Tecnocut Electronically Adjustable Anvil - Dual Web Inspection Cameras (Top & Bottom) - Razor Slitting for precise edge cutting - Waste Matrix Rewind and Product Rewind units _____ Additional Equipment & Accessories - Impression Cylinder Sets (x8): Sizes include 68, 72, 74, 77, 78, 80, 84, 88, 90, 93, 96, 99, 102, 104, 108, 114, 120, 128 - Magnetic Cylinders: Sizes include 136, 144, 148, 154, 160, 168, 176, 180, 93, 96, 99, 102, 104, 114, 120, 128 - 22 Anilox Rolls in various sizes for consistent ink distribution _____ Technical and Optical Condition: - Technical: 9/10 (checked and in excellent running condition) - Optical: 9/10 (cleaned and ready for immediate end-user deployment) _____