Used Harrison Cnc Lathe for sale (11,497)

Condition: excellent (used), Year of construction: 2004, operating hours: 1,000 h, functionality: fully functional, turning diameter over cross slide: 380 mm, turning length: 350 mm, turning diameter: 200 mm, travel distance X-axis: 240 mm, rapid traverse X-axis: 12 m/min, Hembrug Mill-Turn Machine Model: Slantbed Mikroturn 100 CNC Siemens 840D Control Approximate Actual Run Time Hours: 1,000 Hydeostatic Spindle Hydrostatic Ways Scale Feedback Suspended Granite Bed Garnite Spindle Housing Coolant Pump Coolant Circulation Pump Pneumatic Bearing Purge Hydraulic Temperature Control Coolant Temperature Control Return Oil Pump and Reservoir for Remote Location of Hydraulic / Cooling Unit. Options & Additional Purchased Features: Tailstock Vacuum Pump for Vacuum Chucking Programable Controlled Spray Mist C-Axis Milling / Drilling Renishaw Tool Touch Probe Pedpfxjwcfgbs Ag Djpr Non-Contact Tool Incoming Air Dryer / Filter Thousands of Dollars of Brand New Tooling: Live Center Tailstock Taper Adapter 8” Micro-Centric Pneumatic Chuck 3 Sauter Straight Live tooling heads 2 Sauter 90 degree Live tooling heads 1 Special VDI offset Tooling holder 16 VDI Tool Holders for Turning, boring, and on center drilling. Tool Pick-up Video System Additional Backup Hard Drive with Software Fully Loaded and Tested. Extra Siemens Control Pannel Complete Set of Manuals Machine Upgrades I added at additional cost. New Digital Hard Drive New Backup Hard Drive with software already loaded, plug and play ready, no downtime. New Z-Axis Heidenhain Scale Rewound Hydraulic Pump Motor, factory motor was running too hot for my liking. Replaced Operator Panel, back light on monitor went out, have the original, back light needs replacing. 50 Foot Extended Wiring Harness For Remote Location of Hydraulic / Cooling Unit.

Condition: good (used), Year of construction: 2013, control Siemens 840D sl turning length 2000 mm turning speeds max. 3100 1/min Torque 1200 Nm diameter of quill 140 mm quill power 5-30 kN total power requirement 125 kW weight of the machine ca. 20 t Ppodpfxsv Nw Npj Ag Dsr The machine can still be inspected under power at the seller's factory. It is in good condition, the precision of the turning operation is very good. The milling drive is not functional. An offer from Niles for the repair of the milling drive is available on request. Hydraulic steady rest included. Technical details: Turning length 2000 mm Control Siemens 840 D sl Main spindle: Speed max.3800 1/min Main spindle: Torque max. 1200 Nm Pinole diameter 140 mm Center point MK6 Quill force 5 - 30 kN Feed speed Z-axis mm/min Rapid traverse Z-axis 40 m/min Feed rate X-axis - mm/min Rapid traverse X-axis 25 m/min Total power requirement 125 kW Machine weight approx. 20 tons

Condition: used, Year of construction: 2007, turning length 2500 mm control Sinumerik 840 D spindle head A 11 tool numbers 48 swing diameter over bed slide 750 mm swing over bed 780 mm c-axis 0,1-30 1/min diameter of quill 160 mm taper bore MK 5 tool length - max. 500 mm weight of tools max. 15 kg weight of the machine ca. 27 t dimensions of the machine ca. 8,4 x 4,0 x 2,5 m Technical details: Nominal turning length: 2,500 mm Swing diameter over bed slide: 750 mm Swing diameter over bed: 780 mm Working height: 1,300 mm Spindle head to DIN 55026: A 11 Bore through: 123 mm Diameter in front bearing: 200 mm Oriented spindle stop: 0-359 degrees Drive power at 100/60 % duty cycle: 37/45 kW Total speed range: 10-2,500 1/min Number of speed ranges: 2 Speed range I: 10-775 1/min Speed range II: 20-2,500 1/min Max. torque at 60 % duty cycle: 2,500 rpm. Torque at 60 % ED: 2,083 Nm (up to Pedpfx Agowwaruo Dspr 186 rpm)

Condition: good (used), Year of construction: 2015, machine/vehicle number: 190630, turning length: 150 mm, turning diameter: 200 mm, spindle bore: 42 mm, spindle speed (max.): 4,500 rpm, spindle speed (min.): 50 rpm, travel distance X-axis: 150 mm, travel distance Z-axis: 155 mm, rapid traverse X-axis: 24 m/min, rapid traverse Z-axis: 24 m/min, turning diameter over bed slide: 220 mm, overall weight: 5,000 kg, spindle nose: 140 Flat, bar diameter (max.): 51 mm, power: 0.015 kW (0.02 HP), The innovative front-facing spindle of the 2SP-150H helps create an automation-friendly lathe for small parts production. By moving the spindle off the side and incorporating the Okuma Gantry Loader (OGL) into the production line, parts can be loaded and unloaded automatically. An extremely compact footprint improves floor space utilization, while the popular dual spindle option significantly reduces cycle time. Pjdortrlzspfx Ag Dopr Equipped with: Okuma OSP-P300L CNC Control 8" 3-Jaw Chuck Expanding Mandrel Turret Tooling Gantry Loader Pendant Controller Chip Auger Stack Light

Condition: good (used), Year of construction: 2012, functionality: fully functional, machine/vehicle number: 42L09420, Hankook Protec 9NC x 5000 CNC Lathe with Fanuc 32i Control and large spindle bore. MACHINE CONSTRUCTION & FEATURES  Heavy One Piece Cast Iron Bed Construction  Heavy Duty Hardened & Ground Solid Slideways  2 Step manual Gear Change  Heavy Duty Tailstock MACHINE CAPACITIES Swing Over Bed Ø 950 mm Swing Over Carriage Ø 630 mm Chuck Size Dia. Ø 32” Distance Between Centres 5000 mm Load Capacity Between Centres 5000 Kgs SPINDLE Speed 2 -630 Rpm Spindle Bore Ø 254 mm Spindle Nose A2-15” Speed Range Manual 2 Step Centre taper MT #6 Carriage Toolpost Automatic V8 Tool Size 32 x 32 mm X Axis Travel 535 mm Z Axis Travel 4845 mm X Axis Rapid 4 M/min Z Axis Rapid 6 M/min TAILSTOCK Quill Diameter Ø 180mm Spindle Taper MT #6 Max Quill Travel 250 mm BED Width 630 mm Length 6715 mm MOTORS Spindle 30/37 Kw Feed X 1.8 Kw Z 4.2 Kw POWER SUPPLY Electrical Supply 415V, 3Ph, 50Hz DIMENSIONS & WEIGHT Length 7470 mm Width 2205 mm Height 1890 mm Weight 10280 Kgs STANDARD MACHINE FEATURES • Fanuc 32i-A CNC Controller • Centre MT #6 • 4 Jaw Independent chuck • Automatic Spindle Shifting Ppjdpfx Aswcq Tmjg Der • Built in Live Tailstock Spindle • Coolant System • 2 Speed Tailstock Spindle • Work Light • Main Drive Motor & Elect equipment • Centre Sleeve • Chuck Cover Full Rear Guard 5000 between Centres 4-Jaw Independent Chuck & Flange Φ32" (Bore Ø254mm) 4-Jaw Independent Chuck & Flange Φ32" (Bore Ø254mm) Steady Rest(Roller Jaw) Φ250mm - Φ450mm Steady Rest (Roller Jaw) Φ450mm - Φ650mm Live Centre MT #6 Automatic Index Turret Electric V8 in lieu of manual H-4 3 Off OD Tool Holders 3 Off Boring Tool Holders Φ63mm 2 Off Facing Tool Holders Boring Bar Device Ø 150mm (Bar Excluded) Chip Conveyor 5000 Mm Transformer CE Specification Spindle Motor Upgrade 30/37 Kw Fanuc Option A (as detailed below) 1st Spindle Orientation Dynamic Graphic Display Continuous Threading Custom Macro B Extended Part Program Edit Tape Memory 320M Inch/Metric Conversion Manual Guide i Playback Programmable Data Input Run Hours & Parts Counter Tool Offsets 32 Pairs Variable Lead Threading Graphic Function Spindle Positioning Program Restart External Data Input

Condition: used, Year of construction: 2005, TAKISAWA TC 350M CNC TURNING CENTRE MAKE TAKISAWA, MADE IN JAPAN MODEL TC – 350M L5 CONTROL FANUC 21-iTB YEAR 2005 TURRET 12 STATION Ppedpey Eyb Esfx Ag Djr MAXIMUM SWING 700.0 mm MAX TURNING DIAMETER 460.0 mm MAX TURNING LENGTH 510.0 mm TRAVEL X-AXIS 440.0 mm Z-AXIS 550.0 mm SPINDLE SPEED RANGE 2,500 RPM BAR CAPACITY 80.0 mm TBC PLUS C – AXIS MILLING TAILSTOCK TOOL SETTING PROBE SWARF CONVEYOR 10” 3 JAW CHUCK TURRET TOOLING

Condition: excellent (used), Year of construction: 2013, Swing 806mm, Swing over cross slide 527mm, maximum cutting diameter 305mm, 533mm maximum cutting length, 50mm Bar capacity, 8” chuck, 20Hp Spindle Motor, C axis 0.01 degrees, Y axis +/- 51mm, Pedpfsy Ex T Tex Ag Depr 4000rpm spindle speed, 6,000rpm milling speed, 12 Station turret, parts catcher, tailstock, tool setter, coolant

Condition: ready for operation (used), Year of construction: 2014, turning diameter over cross slide: 370 mm, turning length: 2,000 mm, spindle bore: 104 mm, spindle speed (max.): 2,000 rpm, Model: Alpha 1550 XS Year: 2014 Control: FANUC Oi-TD Swing Over Bed: 554mm Swing Over Cross Slide: 370mm Swing in Gap: 830mm Distance Between Centres: 2000mm Spindle Bore: 104mm dia. Spindle Speeds: 1 to 2000 RPM Machine with: 3 - jaw chuck 4 - jaw chuck Ppjdpfxsy Dubws Ag Dor Fixed Steady Quick Change Toolpost

Condition: used, Year of construction: 2000, Turret 1 - facing/length turning 155/280 mm Turret 2 - facing/length turning 82/120 mm Spindle bore (main spindle) 79 mm ((w/collet chuck 65 mm) Spindle bore (sub spindele 65 mm (w/collet chuck 42 mm) Spindle speeds (25-5000 rpm (main spindle) Ppodpfx Agoy Hppze Djr C-axis - 5000 rpm. Turret w/8 stations Control: Siemens Sinumerik 840 C Equipped with: Magazine bar feeder Manuf. Simag model 65.1 - 3200 mm - built 2000 Chip conveyor Various tool holders

Condition: excellent (used), Year of construction: 2009, turning height: 1,280 mm, total height: 5,600 mm, total width: 3,850 mm, total length: 4,260 mm, rotary table diameter: 1,400 mm, workpiece diameter (max.): 1,600 mm, overall weight: 21,500 kg, CNC Vertical lathe Fremtas - 16FR3 MACH-ID 9467 Make: Fremtas Type: 16FR3 Control: FAGOR 8055 TC Year: 2009 Work load 6300 Kg Ppsdpfoy Htilex Ag Der Cross rail adjustment 660 mm Feed rate cross rail 0 - 400 mm/Min Feed rate 0 - 3000 mm/Min Rapid feed 0 - 8000 mm/Min Central lubrication Chip conveyor RAM with Sandvik COROMONT C8 Tooling C8 with double connector Ca 10 units CAPTO Tool system 4 extra heavy duty jaws Max. turning Ø: 1600mm Table Ø: 1400mm Horizontal movement support:1000mm Speeds / ranges: 1 - 200Rpm Power: 75kW Maximum turning height: 1280mm Vertical movement support: 700mm Length: 4260mm Width: 3850mm Height: 5600mm Weight: 21500kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: ready for operation (used), Year of construction: 2001, functionality: fully functional, machine/vehicle number: 100277, turning diameter: 340 mm, spindle speed (max.): 4,500 rpm, travel distance X-axis: 280 mm, travel distance Y-axis: 120 mm, travel distance Z-axis: 500 mm, TECHNICAL DETAILS X-axis: 280 mm Y-axis: 120 mm Z-axis: 500 mm C-axis: 360° (0.0001°) Pjdex I Axrepfx Ag Djpr Spindle speed: 4,500 rpm Spindle bore: 62 mm Chuck diameter: 10 inches MACHINE DETAILS Control: OSP U 100 L Weight: 6,000 kg EQUIPMENT Driven tools Chip conveyor Transformer Manuals

Condition: excellent (used), Year of construction: 2006, Doosan Puma 700L Turning Centre with Fanuc Series 21i-TB CNC Control, 600mm Diameter Powered 3 Jaw Chuck, 3000mm Between Centres, Swing 1030 mm Turning dia 900 mm Fixed steady included Chip conveyor Spindle motor 45 kw Power requirements 62.2 kva Psdpfx Agoy Akdlo Djpr Dims 7.1 x 2.2 x 2.2 m 10 Position Tool Turret, Tailstock, Machine Weight 21500kg. S/No. P60L0377 (2006) Machine is in excellent used condition Videos can be sent on request

Condition: used, turning length 177,8 mm turning diameter 114 mm control FANUC Series 0-T bar passage 34 mm x-axis 140 mm z-axis 280 mm number of tool places 8 Pos. spindle tunring speed 5.000 U/min spindle drive 7,5 kW In our assessment, the machine is in good used condition and can be inspected under power by appointment. Technical features: - 2 turrets - Driven tools Accessories, tools shown, and clamping devices are only included if noted in the additional information. Technical data and specifications are subject to change without notice. Pedpfx Asy Hxqhog Dspr Prior sale is reserved.

Condition: good (used), Year of construction: 2011, functionality: fully functional, turning length: 225 mm, turning diameter: 260 mm, travel distance X-axis: 170 mm, travel distance Z-axis: 335 mm, rapid traverse X-axis: 36 m/min, rapid traverse Z-axis: 36 m/min, rotational speed (max.): 5,000 rpm, quill diameter: 60 mm, quill stroke: 80 mm, ATTENTION: A total of 3 machines available. There are 2 additional identical machines with the same equipment (chip conveyor, etc.). EQUIPMENT - Chip conveyor for side mounting and chip bin - Short bar loader magazine - Interface for bar feeder device - Workpiece catch tray (parts catcher) - Chuck confirmation switch (open/close) - C-axis indexing - Driven tools - Programmable tailstock - Linear guides - Manuals Control: Fanuc 0i-TD Control power-on hours: 30,811 h Machining time: 7,738 h Spindle motor power: 15/7.5 kW Feed motor power X/Z-axis: 3.0/1.8 kW Milling spindle motor power: 3.7/2.2 kW Max. turning diameter: 260 mm Max. turning length: 225 mm Chuck size: 6" Swing diameter over bed: 550 mm X-axis travel: 170 mm Z-axis travel: 335 mm Rapid traverse X/Z-axis: 36 m/min Main spindle Spindle nose (ASA): A2-5 Max. spindle speed: 6,000 rpm Spindle bore diameter: 56 mm Max. bar capacity diameter: 45 mm Turret Number of turret stations: 12 positions Turret indexing time: 0.15 s Tailstock Quill diameter: 60 mm Quill stroke: 80 mm Taper bore/tailstock mounting: MT 4 Milling Spindle Ppsdpey Hrngofx Ag Der Max. spindle speed: 5,000 rpm Bar feeder magazine Model: Fedek Machine Co. DH-65 Bar length min./max.: 280/1,200 mm Bar diameter: 5-65 mm Dimensions Dimensions (L x W x H): approx. 1,620 × 1,200 x 1,400 mm

Condition: used, Year of construction: 2002, functionality: fully functional, turning diameter over cross slide: 380 mm, turning length: 3,000 mm, turning diameter: 630 mm, spindle bore: 90 mm, spindle speed (max.): 2,000 rpm, spindle speed (min.): 2 rpm, travel distance X-axis: 355 mm, travel distance Z-axis: 3,000 mm, spindle motor power: 10 W, rapid traverse X-axis: 8,000 m/min, rapid traverse Z-axis: 5,000 m/min, total width: 1,850 mm, quill travel distance: 180 mm, quill diameter: 100 mm, quill stroke: 180 mm, workpiece weight (max.): 3,000 kg, Equipment: documentation/manual, rotational speed infinitely variable, POREBA CNC TRP 63 Year of manufacture: 2002 Condition: used Machine under power, inspection possible Technical data: • Type: TRP 63 MN • Control: SIEMENS SINUMERIK 810D • Serial number: 7402-09-03006-03 • Centre height: 325 mm • Centre distance: 3000 mm • Spindle bore: Ø 90 mm • Main drive: 10 kW • Power supply: 3 × 380 V / 50 Hz Equipment: • MULTIFIX C tool turret (without holders) • Tailstock with manual quill feed Ppjdpfx Ajyhp Ekjg Dsr • 2 electronic handwheels • Chip conveyor • Coolant system (pump integrated in chip conveyor) • Rear safety guard

Condition: excellent (used), Year of construction: 2017, operating hours: 8,440 h, functionality: fully functional, turning diameter over cross slide: 402 mm, turning diameter: 295 mm, spindle speed (max.): 3,000 rpm, travel distance X-axis: 250 mm, travel distance Z-axis: 750 mm, spindle motor power: 11,000 W, rapid traverse X-axis: 19 m/min, rapid traverse Z-axis: 24 m/min, total height: 2,170 mm, total length: 3,179 mm, total width: 5,310 mm, type of input current: three-phase, overall weight: 5,000 kg, operating hours of spindle: 1,038 h, We are selling a lightly used HURCO TMM 10i Main spindle operating hours: approx. 1,038 h The machine can be inspected at any time, as it is currently still in use The machine is equipped with: Ppjdpfsyi Uf Esx Ag Der Additional display Integrated oil mist extraction

Condition: used, 4 Axis Year Of Manufacture: 1998 Pedpfey Drunox Ag Djpr 8” Chuck 2 Turrets – Turret 1 – 12 Stations Turret 2 – 8 Stations Programable Tailstock 750mm Between Centres Live Tooling C Axis Touch setter Y axis Swarf Conveyor Okuma OSP 7000L Control

Condition: good (used), Year of construction: 2007, turning diameter 1600 mm control Sinumerik 840D workpiece dia. 1400 mm boring diameter 100-500 mm weight of the machine ca. 35 t dimensions of the machine ca. 5,60x3,20x4,00 m Ppedswzmqrjpfx Ag Der

Condition: used, Year of construction: 2000, max swing diameter 700mm, X/Y 255/520mm, tailstock, 12-position tool turret, CNC SIEMENS SINUMERIK 840D, 400V 50Hz 45kW, weight 12t Ppsdpfx Aoym Sm Uog Der

Condition: excellent (used), Year of construction: 2010, functionality: fully functional, Offered here is a lathe from the manufacturer Mori Seiki, featuring twin turrets, a C-axis, and driven tools. The machine is in very good condition and can be inspected and tested at our facility. The scope of delivery includes 4 driven tool holders. Manufacturer: Mori Seiki Model: NZL 2000/600MC Year of manufacture: 2010 Control: MSX-853IV Technical data: Travel X1, Z1: 225 x 650 mm Travel X2, Z2: 170 x 650 mm Rapid traverse X1, Z1, Z2: 30,000 mm/min Rapid traverse X2: 25,000 mm/min Power chuck: Kitagawa N-08 JAPAN Chuck size: 200 mm Main spindle power: 15/22 kW Max. spindle speed: 5,000 rpm Ppjdpfx Aoy Hhvtsg Dor Driven tool spindle power: 3.7/5.5 kW Max. driven tool speed: 10,000 rpm Number of tools, upper turret: 12 (all driven) Number of tools, lower turret: 8 Rated power: 51 kVA Chip conveyor tank capacity: 400 l Total weight: 7,000 kg

Condition: used, Year of construction: 2000, Technical details: turning diameter: 360 mm turning length: 520 mm Psdpex Dcgxjfx Ag Depr total power requirement: 20 kW weight of the machine ca.: 3,8 t dimensions of the machine ca.: 3 x 2 x 2 m

Condition: excellent (used), NLX 2500MC, year of manufacture 2015, in very good condition Psdpfey H Rgbox Ag Djpr

Condition: excellent (used), Year of construction: 2012, functionality: fully functional, Chip conveyor High-pressure pump Parts catcher Bar feeder interface Ppjdoyf Dtqjpfx Ag Dsr Tooling

Condition: excellent (used), Year of construction: 2025, functionality: fully functional, Options: Chip conveyor, Z travel 1000 mm, 16-position powered turret, productivity package, bar feeder interface, robot interface, memory extension, overload detection, high-pressure coolant, 3-color signal lamp, tooling Pjdpeymlkajfx Ag Dspr

Condition: like new (used), Year of construction: 2025, functionality: fully functional, Options: Chip conveyor Pjdpfx Agsyx T Ile Dopr 15-bar coolant Productivity package Engraving function Fume extractor Overload detection Tooling