Used Hdg Compact 15–50 Kw Heating System, Wood Chip Heating for sale (88,433)

Condition: good (used), Year of construction: 2013, Wood chip boiler for steam up to 150 degrees or for water only with hydraulic feed system maximum thermal output up to 850 kW Dedpfx Aoy Dfd Nodrjcn suitable for dry material

Condition: like new (used), Year of construction: 2016, overall weight: 8,200 kg, fuel type: electric, color: white, Type HX426 Blade diameter (mm) 650 Number of hammers (pcs) 30 Inlet size (mm) 1250 x 250 Screen mesh size (millimeter) 80 Length of chips (mm) 50 -80 Capacity (t / h) 8- 10 Main power (kW) 132 Feeder motor (kw) 7.5 +5.5 Discharge motor (kw) 5.5 +5.5 Oil pump motor (kw) 1.5 Length of conveyor (mm) 4000 Djdpfx Asqmi Irodrocn Conveyor length (mm) 10000 Weight (t) 8.2 Note: capacity depends on the physical characteristics of the raw material, feeding method, feeding speed and production volume.

Condition: good (used), Radial fan, radial blower, radial fan, chip extraction blower, fan, extraction, chip blower, high-performance fan -Motor power: 15 kW -Inlet connection: Ø 350 mm -Outlet connection: Ø 250 mm -Dimensions: 1050/1060/H1240 mm Dcedpfjb Ig Ugox Adrjn -Weight: 276 kg

Condition: new, Year of construction: 2026, CORMAK LUFT 1500 VSD+PM Compact screw compressor with dryer – compact set for demanding applications – ENERGY SAVER SET INCLUDES: LUFT 1500 VSD+PM COMPACT screw compressor with dryer. Horizontal compressed air receiver 500 L. Key features that distinguish these models: 1. Permanent Magnet (PM) Motor Technology Most Energy Saver compressors use Permanent Magnet motors. Unlike standard induction motors: They achieve efficiency levels compliant with IE4 or even IE5 standards. They maintain high efficiency even at very low speeds, where standard motors lose performance. They are smaller, lighter and generate less heat. 2. Advanced Inverter Control (VSD) The core of the Energy Saver line is a frequency converter (inverter). Demand matching: The compressor does not operate on an “all-or-nothing” basis. If your system requires only 30% capacity, it reduces speed accordingly, consuming proportionally less energy. Elimination of idle operation: Conventional compressors often run unloaded for several minutes after filling the tank, consuming around 25–30% of rated power without producing air. Energy Saver models virtually eliminate this loss. 3. Soft Start Thanks to the inverter, these units start smoothly from 0 Hz, eliminating current surges at start-up, which: Protects the plant’s electrical installation. Allows frequent start-stops without overheating the windings. Dodpeychbaofx Adrocn 4. Real Savings In practice, Energy Saver technology reduces electricity bills by 30% to 50% compared with fixed-speed compressors. It also maintains very stable network pressure (within 0.1 bar), essential for precision equipment such as laser cutters. Extended service life: Smooth pressure and temperature changes prolong screw element life. Technical Parameters Motor power 11 kW / 15 HP Voltage 400V / 50Hz Output 0–6 bar 1620 L/min Output at 6 bar 1580 L/min Output at 8 bar 1350 L/min Output at 10 bar 1230 L/min Outlet connection (G) 1" Dimensions 1600 × 740 × 1750 mm Weight 500 kg

Condition: used, Year of construction: 2006, Wood chip heating system Fröling Lambdamat FUR 1000, output 1000 kW, year of manufacture 2006, moving grate firing system (for poor fuel quality), hot water system with a maximum protection temperature of 110°C, including pneumatic cleaning system, including hydraulic feed system with backfire protection and hydraulic unit, including multi-cyclone separator with flue gas fan, including flue gas pipes, including control system, including fuel transport system, including sliding floor, system is functional, system must be dismantled by the buyer. Dcodpevyrwpefx Adrjn

Condition: good (used), Year of construction: 2002, operating hours: 123 h, functionality: unexamined, heating capacity: 350 kW (475.87 HP), Mawera Type FU350RIA, fully automatic wood-fired boiler, bottom-feed firing, output: 350 kW. Hot water system, maximum flow temperature 95°C. Year of manufacture: 2002. Parts: boiler body: combustion chamber and heat exchanger, automatic feed screw, multi-cyclone, flue gas fan with piping to the chimney, operating instructions, Logic control system. Already disassembled. Viewing: possible by appointment in Budapest. Djdpfx Aswa Ax Ajdrocn

Condition: good (used), machine/vehicle number: 6092, Vibronics Ultrasonic Cleaning System Manufacturer: Vibronics Power: 1.8 kW Dcedsflc Nmjpfx Adrsn Frequency range: 25 kHz 4 x 150-liter ultrasonic tanks 4 x Ultrasonic generators 1 x Filtration system Overall dimensions: W x D x H = 280 x 100 x 72 cm Individual tank: W x D x H = 50 x 65 x 46 cm 150 liters More new and used items can be found in our shop! International shipping costs available upon request!

Condition: used, functionality: fully functional, Central ventilation unit HELIOS Air 1 XH1500 with highly efficient heat recovery and integrated air reheating. For controlled supply and exhaust ventilation of larger residential, commercial, or industrial areas. 2 EC fans at 0.5 kW each, 1,490 m³/h at 350 Pa. Electric preheating coil 3.9 kW, electronic reheating coil 3.8 kW, cross-flow heat exchanger, integrated filter box. Includes HELIOS Universal control unit ECO and 2 HELIOS duct sensors TFK – a functionally complete system. Technical data: - Air flow rate 1,490 m³/h at 350 Pa; fans 2 x 0.5 kW EC Djdpfozmaqaox Adrecn - Preheating coil 3.9 kW / Reheating coil 3.8 kW; cross-flow heat exchanger; integrated filter box - Control system: HELIOS Universal control unit ECO and 2 duct sensors TFK included - From a commercial environment, sold in its current condition without warranty. More units and equipment are continuously being offered for sale as part of a laboratory and pilot plant liquidation – inquiries are welcome. Sold on behalf of a customer via the Köck auction house. Located in eastern Austria, exact address available upon request. Collection/dismantling by the buyer.

Condition: new, Year of construction: 2026, functionality: fully functional, The CORMAK FM230A Dust Collector is a high-performance dust extraction system designed for the efficient removal of sawdust, wood chips, and fine wood dust generated during woodworking operations. This compact and versatile dust collector is ideal for woodworking workshops, production facilities, and home workshops where effective dust extraction is essential for maintaining a clean and safe working environment. The FM230A comes supplied with a 2.5 m flexible Ø100 mm extraction hose, allowing quick and convenient connection to woodworking machines such as planers, table saws, spindle moulders, and thickness planers. The flexible hose enables the dust collector to be positioned wherever needed within the workshop, ensuring efficient extraction directly at the source of dust and chip generation. Its powerful extraction fan delivers an airflow capacity of up to 1,080 m³/h, providing rapid and efficient removal of sawdust and airborne dust particles. A robust steel construction combined with a heavy-duty metal impeller ensures stable operation, long service life, and reliable performance even under intensive daily use. The mobile wheeled base allows easy transportation between workstations, while the dual-bag filtration system effectively separates air from collected waste. As a result, the FM230A helps maintain a cleaner workshop while improving operator safety, visibility, and overall working comfort. Key Features Supplied with a 2.5 m Ø100 mm flexible extraction hose Airflow capacity up to 1,080 m³/h for efficient dust and chip extraction High-performance fan for sawdust, chips, and fine wood dust 0.75 kW single-phase motor (230 V) suitable for standard power outlets Durable metal impeller for long-lasting, reliable operation Dodpfoytn Tdjx Adrscn Mobile design with transport wheels for easy repositioning Efficient dual-bag filtration system Large waste collection bag for extended operating time Compact footprint, ideal for small and medium-sized woodworking workshops Applications The CORMAK FM230A woodworking dust collector is suitable for use with a wide range of woodworking machinery, including: Surface planers and jointers Thickness planers Table saws Spindle moulders Wood sanding machines Its high airflow capacity effectively removes sawdust and wood dust generated during machining, improving workplace visibility while reducing airborne dust levels. Standard Equipment CORMAK FM230A dust collector Ø100 mm flexible extraction hose (2.5 m) Fabric filter bag Waste collection bag Bag retaining clamps Mobile wheeled base Technical Specifications Specification Value Motor power 0.75 kW Power supply 230 V / 50 Hz Airflow capacity 1,080 m³/h Motor speed 2,800 rpm Maximum vacuum pressure 1,000 Pa Noise level 68 dB Number of bags 2 Extraction inlet diameter Ø100 mm Extraction hose length 2.5 m Collection bag capacity 90 L Height 1,800 mm Width 750 mm Length 450 mm Weight 27 kg

Condition: good (used), Reznor UDSA Gas-Fired Warm Air Heater UDSA Gas-Fired Warm Air Heater – efficient, even at peak performance The most well-known unit from REZNOR is the UDSA gas-fired warm air heater, which ensures even air distribution in industrial halls. This easy-to-install recirculating air unit is available in 14 performance sizes, from 7 to 97 kW, and consists of a heat exchanger, gas burner, and an exhaust gas fan. The combustion air can be drawn either from the outside or from the room, as standard. The UDSA warm air heater from REZNOR guarantees even air distribution in the heated hall. Its patented heat exchanger sets new standards in terms of flow behavior and heat transfer, ensuring an efficiency of over 92 percent. UDSA: compact, revolutionary, and groundbreaking. With this generation of units, halls can be heated in a particularly economical way – directly, that is, without central heating – using decentralized, modulating gas-fired warm air heaters. REZNOR UDSA Gas-Fired Warm Air Heater. The advantages: Efficiency of more than 92% Unit is also suitable for vertical mounting Low NOx emissions Innovative combustion concept Quiet operation With CE system certification, version B or C Compact design for easy installation Even heat distribution Standard vertical and horizontal air guide vanes Modulation of the heating output up to 50% EC technology ErP Ready These units are direct-fired gas warm air heaters with fan-assisted atmospheric multi-gas burners. The installation of the gas warm air heater, including the gas and exhaust connections, must be carried out by an authorized installation company. These gas warm air heaters are suitable for: Dedpex Ihg Iofx Adrjcn - Natural gas or liquefied gas operation - Recirculating air operation - Intake temperatures below 5°C with a stainless steel heat exchanger * - Heating operation with 1 stage or 2 stages* Control via room thermostat and heating control switch - Ventilation° Control via ECOtronic TN - L° with day-night-week program - Exhaust gas extraction via roof, version B or C ° - Exhaust gas extraction through the outer wall, version C ° Gas warm air heater type: UDSA025-3 Gas appliance type: B22P-C12-C32-C52-C62 Intended use: DE Gas category: I2ELL Gas type: G20 Natural gas Connection pressure: 20 mbar Nozzle pressure: 8.20 mbar Maximum nominal heat input (Hs) QN: 30.08 kW Maximum nominal heat input (Hi) QN: 27.75 kW Maximum nominal heat output: 25.53 kW Minimum nominal heat output: Connection voltage: 230V 1N, 50Hz Air volume flow: 2385 m3/h Protection class: IP20 You can find more items – new and used – in our shop! International shipping costs on request!

Condition: used, Year of construction: 2007, DEMAG Ergotech System 1300/1500-11500 injection moulding machine from 2007 with 13,000 kN clamping force, 110 mm screw diameter and 5,200 g shot weight. Equipped with a Wittmann DR 853 227 linear handling robot (2014) featuring servo B axis 270° and C axis 90°, plus 32 hot runner control zones for advanced multi-cavity production. Factory-configured with 4 hydraulic core pulls and 12 cascade circuits for complex technical moulding applications. CNC CONTROL Controller: Demag Ergocontrol CLAMPING UNIT Clamping force kN: 13.000 Tie-bar clearance (H x V) mm: 1.500 INJECTION UNIT Injection unit size (Euromap): 11500 Screw diameter mm: 110 Max. shot weight (PS) g: 5.200 MOULD FUNCTIONS & HANDLING Dcsdpfxozz Rw Hj Adrsn Hydraulic core pull circuits: 4 Cascade / valve gate circuits: 12 Hot runner control zones: 32 Handling robot (model / year): Wittmann DR 853 227 (2014) Robot strokes X / Y / Z mm: 1.600 / 2.500 / 3.500 Robot rotary axes (B / C): C 90° / B servo 270° DRIVE Max. hydraulic pressure bar: 190 Mains connection V / Hz / A: 3 x 400 / 50 / 348 + 201

Year of construction: 2017, condition: ready for operation (used), functionality: fully functional, Talbot T150 warehouse wood waste heater will heat a warehouse upto 5000 square feet, excellant condition serviced with Talbots qualified engineers Dcedpfx Adozc Hkyoren

Condition: ready for operation (used), Year of construction: 2008, functionality: fully functional, clamping force: 15,000 kN, screw diameter: 145 mm, injection pressure: 1,454 bar, opening stroke: 2,900 mm, tool height: 1,400 mm, TECHNICAL DETAILS Clamping force: 15,000 kN Platen dimensions (H x V): 2,150 x 1,880 mm Tie bar spacing (H x V): 1,500 x 1,250 mm Min. mold height: 700 mm Djdpfx Ajxup T Hedrocn Max. mold height: 1,400 mm Max. opening stroke: 2,900 mm Screw diameter: 145 mm Shot volume: 10,981 cm³ Shot weight (PS): 9,880 g Injection pressure: 1,454 bar MACHINE DETAILS Dimensions & Weight Dimensions (L x W x H): 14,400 x 3,400 x 2,900 mm Net weight (incl. control cabinet): 74,000 + 21,000 kg Electrical & hydraulic equipment Rated power of pump motor: 165 kW Heating capacity: 97 kW EQUIPMENT Wittmann W 753 robot (year of manufacture: 2008) Safety enclosure Conveyor belt Service history notes: 2010: New screw with RSP and barrel 2015: New IBED 2015: New wiring panel 2017: New motor and 2nd pump 2017: New injection side cylinder piston BS with seals 2017: Replacement of oil cooler circulation pump 2017: Replacement of teach box (robot) 2018: Replacement of pumps P1 + P3 (at 65,800 operating hours) 2018: Replacement of hydraulic oil

Condition: used, functionality: unexamined, Year of construction: 2004, Thermal Oil Heating System AURA Max. permissible pressure (bar): PS 10 Dedpfx Aew Hxgvedrscn Max. permissible temperature (°C): TS 350 Min. permissible temperature (°C): TS 25 Volume (L): V 60 Medium: Thermal oil (Diphyl) Category: III The system is available twice, price per unit Note: The machine is still installed and can be inspected on site. The buyer is responsible for dismantling and organizing transport. This is not included in the offer price.

Condition: new, Year of construction: 2025, ♻ The model SD 45 is characterized by a low power connectivity, Dsdpfx Aeic U Diodrocn high productivity, ease to use with a long warranty period. ✔ Power: 15 kW ✔ Shaft length: 430 mm ✔ Shaft diameter: 160 mm ✔ Shaft RPM: 265 rpm ✔ Number of cutting knives: 15 ✔ Granulation: 10-50 mm ✔ Capacity: up to 1,5 m3/h* ✔ Material discharge opening: 152 mm ✔ Material: Plastics, cardboard, wood (chipboards, MDF boards, etc.) ✔ Filling opening: 620x430 mm ✔ Dimensions L/W/H: 0,95/1,08/1,91 m ✔ Weight: 920 kg 4 years warranty or 2000 working hours

Condition: new, Year of construction: 2016, functionality: fully functional, BHK-TECH MW50-2V Microwave System System and Functional Description Microwave system consisting of two MW50 V microwave modules, an internal conveyor system, and two external conveyor systems. The actual microwave chamber consists of a 3 mm stainless steel sheet and has control cabinet segments permanently mounted along its length, in which the high-frequency components are installed behind mechanically and electrically secured covers. Dcodpfowhvcwjx Adren The conveyor system for transporting the pallet within the system is designed in a microwave-encapsulated form. The microwave system is equipped with a total of 32 magnetrons, which directly emit energy into the chamber's interior. This technology guarantees uniform energy distribution within the chamber. The magnetrons can only be activated when the door is closed and securely latched. The sealing system on the door opening prevents microwave leakage. Any resulting fumes are extracted via 2 exhaust fans with a total conveying capacity of 17,000 m³/h (free-blowing). The necessary cooling of the high-frequency components is provided by the airflow from the exhaust fans, supported by 4 supply air fans (conveying capacity, free-blowing, approx. 3,500 m³/h). In front of the system, there is one conveyor system each with its own drive. The pallet is manually loaded and unloaded by the customer. Sensors are used to check whether the pallet is positioned correctly on the conveyor system. The program is started via a switch on the control panel. The loaded pallet is transported into the microwave system and positioned using a light barrier. The doors of the microwave system are closed, and the microwave irradiation is activated. After the microwave irradiation time has elapsed, the door is opened, and the pallet is transported to the unloading conveyor system. The activation time of the magnetrons can be pre-selected in four power levels on the main control panel. Manufacturer: BHK-TEC Microwave oven type: MW50-2V Number of magnetrons: 32 Voltage: 400 V 50/60 Hz Connection: 70 kW Fuse: 250 A Frequency: 2450 MHz Compressed air: 6-10 bar Year of manufacture: 2016 Emissions Sound pressure: 80 dB Frequency: 50/60 Hz Exhaust air: 2 x 8500 m³/h Supply air: 4 x 3500 m³/h Supply air connection: 2 x 346 mm ø Exhaust air connection: 1 x 465 mm ø Dimensions and Weight Microwave oven: (L x W x H) 3735 x 2373 x 4756 mm Min. room height: 5000 mm Usable interior space: (L x W x H) 3100 x 1200 x 1200 mm Max. permissible conveyor system load: 3000 kg Max. permissible total weight: 9000 kg Empty weight: 6000 kg Control cabinet: (L x W x H) 3800 x 520 x 2250 mm Weight: 700 kg The machine is in absolute new condition. The machine has never been used. New price: €300,000. More ovens in other sizes - new and used - can be found in our shop! International shipping costs upon request!

Condition: good (used), Amico Uniflair Climate Cooling System Precision Air Conditioner 7.2 kW SDC0200B Model: SDC0200B Coolant type: Water Fan(s): Fan with forward-curved blades Supply voltage of the unit: 230V/1ph/50Hz OPERATING CONDITIONS Dry-bulb temperature: 24.0 °C Wet-bulb temperature: 17.1 °C Relative humidity: 50% Altitude: 0 m Air static pressure: 20 Pa Inlet temperature of coolant: 7.0 °C Outlet temperature of coolant: 12.0 °C Glycol content: 0% Freezing point: 0.0 °C Coolant flow rate: 1237 l/h Coolant flow rate: 0.34 l/s PERFORMANCE AND FEATURES Total cooling capacity: 7.2 kW Sensible cooling capacity: 6.4 kW Djdpfsd Ip Efex Adrocn Net total cooling capacity: 6.7 kW Net sensible cooling capacity: 5.9 kW SHR: 89.0 % EER (cooling capacity / system power consumption): 13.9 kW/kW Air flow rate of the air conditioner (dry): 1600 m³/h Air flow rate of the air conditioner (dry): 0.44 m³/s Air temperature outlet/unit outlet: 12.9 °C Relative supply air humidity (unit outlet): 90 % Number of fans: 1 Fan(s) speed control: 72 % Power consumption of room unit: 0.5 kW Power consumption of fans: 2.8 A Max. external pressure: 144 Pa Pressure drop of the coil: 16.6 kPa Pressure drop of the 3-way valve: 9.6 kPa Total pressure drop on the coolant side: 26.1 kPa Sound pressure level at a distance of 2 meters in free field measurement: 43.0 dB(A) (at external pressure = 20Pa) DIMENSIONS Air conditioner Height: 1740 mm Width: 550 mm Depth: 450 mm Year of manufacture: 2004 and 2006 Scope of delivery: 1x Amico Uniflair SDC0200B precision air conditioner Item condition: used You can find more items - new and used - in our shop! International shipping costs on request!

Condition: good (used), Autotherm ATK 2000 cooling system, 20.5 kW cooling unit in a 20-foot container. Technical data Nominal voltage: 3/PE AC 50Hz 400V (DIN IEC 38) Nominal power: 20.5 (31.5) kW Nominal current: 50 (71) A Supply line fuse: 80 A Mechanical data Dimensions: (W x L x H) 2430 x 6800 x 4350 mm Weight: 4800 kg Inlet: Flange SDIN2633 DIN100 PN16 Outlet: Flange SDIN2633 DIN100 PN16 Overflow / drain: 2" internal thread Well water inlet: 2" internal thread Well water outlet: 2" internal thread Adiabatic inlet: 3/4" internal thread Filling: manual 3/4" internal thread Water circuit Coolant: Water/glycol (90% / 10%) Flow pressure: max. 10.6 bar Tank volume: 4000 liters Free cooling circuit Pump type: Grundfos CR 45-1-1 AFAE-EUUE Delivery pressure: ... 2.15 bar Delivery rate: 58 m³/h Consumer circuit Pump type: (Pressure boosting system) Grundfos Hydro 2000 ME 2 CRE 32-6 AFAE-EUUE Delivery pressure: max. 10.6 bar Delivery rate: max. 40 m³/h 20-foot container AIS-DSC-22-28 External dimensions mm (L x W x H): 6058 x 2438 x 2591 Dedpfx Aeuzhcuedrscn Internal dimensions mm (L x W x H): 5898 x 2352 x 2390 Usable area inside m²: 13.88 Compact control Compact Control 2000 ME. Compact microprocessor control for stepless and cascade control of pumps with MGE motors and integrated frequency converter for demand-based, energy-optimized operation of multi-pump systems. With automatic switching on and off of the individual speed-controlled pumps via a digital controller specially developed for centrifugal pumps. Grundfos R100 infrared handheld device and diagnostic unit: for commissioning, data monitoring, reading error messages and configuring Grundfos pumps. More items – new and used – can be found in our shop! International shipping costs on request!

Condition: used, Year of construction: 2009, heating capacity: 400 kW (543.85 HP), We offer a biomass boiler from the renowned company Kohlbach. Biomass boiler 400 kW TYPE K 8 – 400 Biomass boiler for bark, wood chips, and sawdust. Complete pump and valve set. Multicyclone Fuel feed Heat exchanger from 2009 Dcjdpjx Daw Uofx Adren Optional and available at extra cost: Biomass boiler with movable floor and hydraulic pump

Condition: good (used), FOBA DP 15 Laser Marking System Dcjdpsw U T Ebofx Adren The FOBA DP 15 laser marking system uses a fiber laser with a wavelength of 1064 nm and a lens focus of f=254 mm (254 mm focal length). This combination enables the permanent and sharp marking of materials such as metals and plastics using the "all-purpose laser." The 1064 nm wavelength is well absorbed by many materials, which can be used for annealing marking, color change, or material removal. Application: The fiber laser is a versatile "all-purpose laser" for marking industrial products. It is ideally suited for metals and a wide range of plastics. The technology enables permanent, easily readable, and precise marking. Mode of operation: The laser beam creates a focused light spot that penetrates the material. Depending on the material and settings, various effects can be achieved, including: Annealing marking: A color change of the material through heating. Color change: Creation of a color contrast on the material. Material removal: Removal of material to create a recess. Details: Device: FOBA DP 15 Laser Marking System Laser type: Fiber laser Wavelength: 1064 nm Focal length (f): 254 mm (equivalent to 10 inches) More new and used items can be found in our shop! International shipping costs available upon request!

Year of construction: 2013, condition: excellent (used), Ecat ovo compact EG10 In-Ovo Vaccination System For modern hatcheries, the Egginject® Compact enables safe in-ovo vaccination thanks to its dual-pressure injection system. The Egginject Dual Pressure Injection System is a patented technology that allows for individual adjustment of the injection depth for each embryo, regardless of size and age. The compact Egginject enables vaccination in small and medium-sized hatcheries. - Adaptable to all types of incubation trays Dcedpfx Ajdx Axlodrjn - Reliable and robust design for high loads - Easy to use: simple and user-friendly. - Can be used as a stand-alone unit or fully integrated into the hatchery automation line. Year of manufacture: 2013 Condition: used

Condition: good (used), Year of construction: 2001, Atlas Copco SF 15 oil-free scroll compressor The SF series utilizes scroll technology, which eliminates metallic contact between the compression elements, meaning that absolutely no oil is required in the compression chamber. This makes the system ideal for applications that require completely clean and oil-free compressed air (e.g., in laboratory, medical, or food processing environments). The three installed scroll compressor elements have recently been overhauled or replaced. Operating hours (total): 15,983 hours (the actual time the compressor has been running since 2001). Controller hours: 99,527 hours (the time the controller was energized). Operating times of the individual scroll elements (compressor stages): Operating hours, element 1: 735 hours Dsdpfxjzwmd Us Adrscn Operating hours, element 2: 735 hours Operating hours, element 3: 736 hours Technical data: Manufacturer: Atlas Copco Model / Product type: SF 15 (Oil Free Air) Serial number: ATI 502157 Maximum operating pressure: 8 bar(e) Delivery rate (Free Air Delivery): 24.7 l/s Shaft rated power: 14.8 kW Shaft rated speed: 1500 rpm Total weight: 590 kg Year of construction: 2001 Controller: Elektronikon (digital display) Length: 1.21 meters Width: 0.96 meters Height: 1.66 meters "Everything from a single source: We would be happy to offer you suitable bank financing for your project." More items – new and used – can be found in our shop! International shipping costs available upon request!

Condition: new, table length 1500 mm Djdpjy N D N Usfx Adrocn table width 1500 mm table height 150 mm bore 22 mm weight 543 kg

Condition: used, HAAS Wood Chip Screening Machine Dsdpezmfq Ssfx Adrocn Manufacturer: HAAS Recycling Systems Country of origin: Germany Type: Vibrating chip screen Designed for screening wood chips, bark and biomass materials Suitable for separating fine particles and contaminants Vibrating screening system Multiple material discharge fractions Approximate dimensions: Length: 4.29 m Width: 2.10 m Suitable for woodworking and biomass processing industries

Condition: good (used), Year of construction: 2005, Ref. no.: 18565 Manufacturer: DEMAG Type: 150-610. System NC4 Year of construction: 2005 Clamping unit Clamping force: 150 ton Opening stroke: 500 mm Distance between tie bars: 500 x 500 mm Mould height min.: 250 mm Opening width: 750 mm Platen size (h x v): 750 x 750 mm Djdpfx Adsxhfuaorjcn Injection unit Screw diameter: 45 mm Injection volume: 323 cm³ Shot weight: 290 g Injection pressure: 1973 bar Measurements and weight Dimensions: 5.45 x 1.63 x 2.1 m Machine weight: 7500 kg Robot Producer: Wittmann Type: W721-0231 Year: 2005 Further information: The Demag Ergotech System series hydraulic injection moulding machine is a suitable plastic injection moulding machine for technical plastic parts and automated serial production applications. Thanks to its hydraulic operating principle, the machine offers powerful and stable injection performance, while the Demag NC4 control system ensures precise process control. The machine is equipped with a Demag (Wittmann) DR721 linear robot. Robot specifications: Year of manufacture: 2005 X-axis: 550 mm Y-axis: 1000 mm Z-axis: 2000 mm The robot system enables fully automatic part removal, conveyor transfer, and automated serial production processes. In addition, the machine comes with 2 complete spare plasticizing units / injection units (screw and barrel assemblies). The machine was in running production and operating without problems until dismantling.