Used Helios Micrometers, 6 Pieces for sale (56,000)

Condition: used, tool holder, milling holder, milling tool, adapter, intermediate sleeve, reducing sleeve, Weldon reduction Itsdpfou S Tclox Abyek -Milling adapters: intermediate sleeves, 6 pieces -Type: SK40 MK4 5 pieces / SK40 MK3 1 piece -Price/Delivery: complete -Total transport dimensions: 190/135/H225 mm -Weight: 7.8 kg/total

Condition: used, Lifting jack, swivel jack, lifting jack, shackle, load lifter, lashing eye, lashing, anchor point, lifting jack thread -Load racks: 6 pieces, 450 mm height -Base plate: 450 x 350 x 20 mm -Shäkel plate: 146 x 146 mm, M42 2 pieces with shäkel -Price: complete -Dimensions: 450/350 / H450 mm Itodpfsgtu Uqsx Abyjk -Weight: 60 kg / pc.

Condition: used, Micrometer screws, micrometer screws, outside micrometers, outside micrometers -Manufacturer: Helios, outside micrometer -Measuring range: 0-25 mm -Reading: 0.01 mm Itedpfx Aou Inttobyek -locking device -Number: 2x micrometer available -Price: per piece -other sizes: also available -Case dimensions: 150/75/H25 mm -Weight: 0.3 kg/piece

Condition: good (used), Wood router bit, router head, router tool, wood router bit, profile router bit -Outer diameter: 170 mm Ijdpfx Aeb A Sqgjbystk -Number: 6 milling cutters -2x: left -4x: right -Price: complete -Weight: 4.6 kg/piece

Condition: good (used), Semiconductor relays, switchgear, switching components Itedpfx Abopvqx Hsyok -Manufacturer: opto 22 electromatic, Semiconductor relays, 7 pieces with heat sink -Type: 5x opto 22 480D45-12 / 1x Gavazzi RA4450-D08 -Price/Sale: complete -Dimensions: 300/200/H70 mm -Weight: 3.4 kg

Condition: good (used), Fan heater, electric heater, heater, electric heater, electric heater fan, heat exchanger, air heater, air heater, duct air heater, duct air heater -Helios: EHR-R 6/315 electric heater battery -with: EHS control Ijdjfgmixepfx Abyjtk -Power: 6.0 kW -Voltage: 400 V -Fan: Ø 315 mm -Dimensions: 380/315/H415 mm -Weight: 5 kg

Condition: good (used), Block cutting nozzle, burner nozzles, cutting nozzles, cutting machine, burner, oxy-fuel cutting machine, cutting nozzles, Iedpfx Aow Ufpxobystk -Block nozzle: Block cutting nozzle type 3 - 10 A 6 pieces -Cutting range: 3 - 10 mm -Pressure: 2.5 - 3.5 bar -Diameter: 20 mm -Length: 65 mm -Price/Delivery: complete -Transport dimensions: 130/65/H20 mm -Total weight: 0.5 kg

Condition: good (used), Clamping plate, milling support, plate field, welding table, welding table, plate boring mill, clamping angle, clamping cube, clamping devices, clamping supports, clamping tool, clamping box, clamping tower Iodpfx Aocn Ibuebyotk -Clamping block: for workpiece clamping or placing material under it -Width: 100/120 mm -Length: 230/330 mm -Height: 65/78 mm -Number: 6x milling support available -Price: complete -Weight: 58 kg

Condition: good (used), Tool holder, milling tool holder -Number: 6x SK50 recording -various versions -Ø 56 x 110 mm -Ø 46 x 130 mm -Ø 52 x 90 mm -Ø 42 x 80 mm -Ø 42 x 55 mm -Ø 32 x 60 mm Itsdpfxsb E S Nao Abyek -End milling cutter -Price/Sale: complete -Total weight: 24 kg

Year of construction: 2016, condition: ready for operation (used), A total of five (5) compact Helios granulate dryers with integrated conveying and control are available. Year of manufacture: 4x2016/1x2019, drying hopper volume: 30l, suction lance length: 810mm, drying capacity: approx. 6kg/h, max. drying temperature: 185°C. Machine dimensions X/Y/Z: approx. 420mm/420mm/625mm, weight: approx. 80kg, control: WINneo basic. Including conveying unit with dedusting and dust collection container with filter. Documentation available. An on site inspection is possible. Itsdpeydp Abofx Abyok

Condition: good (used), Year of construction: 1973, functionality: fully functional, pressing force: 1,250 t, stroke length: 220 mm, table width: 260 mm, table length: 820 mm, throat depth: 700 mm, total length: 6,400 mm, total width: 4,365 mm, total height: 3,760 mm, overall weight: 135,000 kg, operating pressure: 7 bar, pressure: 7 bar, Upset slide nominal force: 12 500 kN /1 250 ton/ Maximal diameter of work piece: 140 mm Maximal diameter of upset flange: 180 mm Itedjuby N Djpfx Abyek Upset slide stroke: 460 mm Slide continuous idle strokes in minute: 35 Electric motor power: 75 kW Overall dimensions: - L-R: 6 400 mm - F-B: 4 3650 mm - Height: 3 760 mm Total weight, circa: 135 000 kg.

Condition: excellent (used), Cutting nozzle, welding torch, MIG/MAG torch, hand arc - piercing torch, gouging torch, gouging nozzle, torch nozzles, cutting nozzles, flame cutting system, torch, oxy-fuel cutting system -Manufacturer: Messer, cutting nozzle flame cutting nozzle 6 pieces unused Ovp Itedpsw Udkzjfx Abysk -Type: Vadura 1215-A .: 71615946 -Cutting range: 60-100 mm -Price/Delivery: complete -Transport dimensions: 120/90/H30 mm -Weight: 0.1 kg

Condition: used, Lens, lenses -Number: 6x lenses Itsdsb Nfc Sopfx Abyok -packed: individually -Dimensions: 110/110/H35 mm -Price: complete for all 6 pieces -is only sold complete -Weight: 0.3 kg/piece

Condition: good (used), Fixators, leveling units, leveling elements, machine feet, leveling shoes, vibration dampers, spring elements Itodogul Smjpfx Abysk -Manufacturer: Stop Choc, vibration dampers, 6 pieces, for machine tools and equipment -Type: Ø 129 mm -Installation height: 27 mm -Price/Sale: complete -Total weight: 9 kg

Year of construction: 2017, condition: used, Used machine Year of manufacture: 2017 Condition: Well-maintained Equipment: Gantry milling machine High-Z S-1400T/105 (Rev. 1.5 - Facelift 2016) with ball screws Travel: 1400 x 1050 x 110 mm (X/Y/Z) Machine control Zero-3 (Rev. 1.3) for High-Z series, 5-channel, 110 - 240 Volt, 50/60 Hz Milling kit for High-Z S-1350 or S-1400T/105, additional stabilization of the Z-axis when machining very hard materials Energy arm for S-1350 and S-1400/105 Cable harness for clean routing of cables and hoses from milling motor, spray mist cooling, etc. T-slot plate on base frame for High-Z S-1400T/105 - 1790x1160mm (NL2016) 1790 x 1160 x 76mm T-slot keys, 8 pcs with bridge, M6 - 10 pcs. incl. screws M6x25 6 pcs. clamping bars 50x20x10mm M6 Base frame for combination with enclosure for S-1400T/105 - 1790x1450x900mm (NL2016) SET - Suhner milling motor UAD 30-RF / 1050W - 3,500-30,000 RPM, 230 Volt, 50/60Hz incl. 8mm and 10mm collets Collet set for Kress and Suhner (UAx-30RF) milling motors, 3.00mm / 3.175mm (1/8") / 6.00mm Milling cutter set, 10-piece (shaft 3.175mm) Wood milling cutter: 2x1mm / 2x2mm / 1x3mm Aluminum/plastic: 2x1mm / 2x2mm / 1x3mm Extraction nozzle made of aluminum for Kress or Suhner milling spindle Hose nozzle with Ø 32 and 38mm Dimensions 135x60x30mm Tangential module EOT-3, stroke 3mm Oscillating with 3mm stroke Connection cable for EOT-3 / TCM-4 for High-Z series - 5m Tungsten carbide blade type E12 - cutting edge 12mm Tungsten carbide blade type E18 - cutting edge 13.5mm EcoCam EC-4 continuous cutting pad 4mm / roll width 2m Always delivered in 2m roll width!!! 1m2 = 2 x 0.5m Tangential grooving module TCT-1 Tool holder type KR for grooving module TCT-1 for ball-bearing grooving wheels Grooving wheel B14 Grooving wheel B24 Side channel compressor Rubin 220, 1.5KW/50Hz vacuum pump incl. 3m spiral hose 40mm 230V/50Hz / 9.5A / 190mbar -190mbar / 71dB(A) Maintenance set High-Z series Grease gun + grease cartridge 400g + 100ml oil Network switch 5-port 10/100 Mbit/s + LAN cable 1m, 5x 10/100Mbps-RJ45 ports with auto negotiation Kinetic-NC control software incl. CNC-Pod (LAN), network cable + USB charging cable Vacuum table VT-150100 - 1500x1000mm incl. through-milling mat and connecting hoses Location: NRW Availability: Short-term Sold on behalf of a customer! Technical data without guarantee! Iodpfxozu T Smo Abyjtk

Condition: good (used), Solid-state relays, switchgear, switching components -Manufacturer: opto 22, solid state relay 6 pieces with heat sink -Type: 480D45-12 -Quantity: 2x assembly available -Price: per assembly -Dimensions: 300/200/H70 mm -Weight: 3.4 kg/pc. Iodopvqyvepfx Abystk

Condition: good (used), Year of construction: 2015, functionality: fully functional, Reverse Osmosis Plant for ethylene glycol recovery, with a 12 m³ raw-water storage and homogenisation tank, nominal feed flow rate of 4 m³/h at 4 bar and filter backwash flow rate of 11 m³/h at 1.5 bar. Includes an automatic downflow multimedia filter with anthracite and sand beds supported on gravel, designed to remove suspended particles and protect the membranes. Compact skid-mounted reverse osmosis unit with two-stage filtration using replaceable 20- and 5-micron cartridges, a variable-speed high-pressure pump and a two-stage (1+1) × 6 reverse osmosis membrane configuration. Equipped with 8-inch DOW spiral-wound aromatic polyamide membranes installed in GRP pressure vessels rated up to 1,000 psi. Nominal recovery rate: 90%, equivalent to a theoretical permeate production of approximately 3.6 m³/h under design conditions. Low- and high-pressure piping and interconnections manufactured from AISI 316L stainless steel. Includes recirculation, front and side permeate collection, a CIP chemical cleaning system, membrane flushing, a GRP solution-preparation tank, a 25-micron mesh microfilter and a delivery pump for cleaning solutions and permeate water. Automated control system based on a Siemens S7-200 PLC, providing measurement and control of flow rates, temperature, pressures, pressure drops, operating times, pumping, backwashing, flushing and process alarms. Operator panel with a 6-inch colour touchscreen for parameter display and configuration, start/stop control, filter washing, alarm monitoring and trend graphs. Includes a 2 m³ reverse osmosis reject-water tank for subsequent transfer to the evaporator. Serial No.: MPP51525. Itjdpfjzvddcjx Abyok

Condition: used, tool holder, milling holder, milling tool, long milling mandrel, attachment holder, cutter head holder, cutter head holder -Milling holder: cutter head holder SK50 6 pieces -Type: various versions see photos -Hole: Ø 40 mm -Price/Delivery: complete Iodpfx Asvaw Utsbyjtk -Transport dimensions: 300/200/H240 mm -Total weight: 24.8 kg

Condition: good (used), Description: The HELIOMAT 6K is a batch dryer specifically designed for the efficient drying of small quantities of plastic material directly before processing. It is particularly used in laboratories or when frequent material changes are required (e.g., small series production). Batch dryer/pre-drying station with an integrated absorption dryer, type TLZ 12.1. Six 15-liter V2A modules can be dried simultaneously on the Heliomat, each with different temperatures, featuring a sliding guide and an outlet slide (80x15mm) for ARBURG machines. Four additional 15-liter modules are included, so you will receive a total of ten small-batch dryers. 3 air filters Cooler for recirculated air at high temperatures above 120°C. Drying can be performed up to 170°C! Weekly timer 6 red/green traffic lights to indicate the end of the drying cycle or a fault at the docking station Itsdpfx Aezpydxsbyok Automatic 6-stage air flow control via frequency inverter on the dryer fan The unit is mobile Includes interface for a dew point sensor for the absorption dryer. The Heliomat is 140 cm high, 54 cm deep, and 2.95 m wide.

Condition: good (used), Year of construction: 2022, functionality: fully functional, machine/vehicle number: 122278, type of input current: AC, conveyor belt width: 650 mm, total width: 1,100 mm, total height: 1,900 mm, total length: 1,800 mm, overall weight: 400 kg, input voltage: 240 V, working height: 800 mm, input current: 3 A, compressed air connection: 6 bar, conveyor belt thickness: 2 mm, outer diameter: 450 mm, input frequency: 60 Hz, inner diameter: 200 mm, control voltage: 24 V, year of last overhaul: 2022, space requirement height: 2,100 mm, space requirement length: 2,300 mm, space requirement width: 1,600 mm, MOSCA SoniXs TR-6 Pro Strapping Machine | Year of manufacture 2022 | Good condition For sale is a high-quality automatic strapping machine from the German brand manufacturer MOSCA, model SoniXs TR-6 Pro. The machine dates back to 2022 and is in good used condition. It is ideally suited for professional use in production, shipping, logistics, warehousing and packaging. The MOSCA SoniXs series uses modern ultrasonic sealing technology and is designed for reliable and efficient strapping processes. Itsdpfx Absztc S Hjysk The original new price was approximately €40,000. Technical data according to the nameplate: Manufacturer: MOSCA GmbH Model / Type: SoniXs TR-6 Pro Machine type: Strapping machine Year of manufacture: 2022 Machine number: 1322278 Power supply: 1L + N + PE Frequency: 50–60 Hz Voltage: 100–240 V Current consumption: 3.00–1.25 A Maximum fuse rating: 13 A Frame internal dimensions: 1000 mm x 1000 mm Condition: used, good Condition and inspection The machine shows the usual signs of wear for a used industrial machine. The exact scope of delivery and the optical condition can be seen in the pictures. An inspection and functional test after prior arrangement is expressly desired. Logistics and transport Collection: Preferred. Loading/transport: Loading or organization of transport can be arranged. Price and legal information Price: 16,000 EURO negotiable plus legal VAT. Invoice: You will receive a proper invoice with VAT shown. Terms of sale: Sale exclusively to commercial customers (B2B) with exclusion of any warranty and guarantee. If you are interested or have any questions, please send us a message. We will gladly arrange an inspection appointment.

Condition: good (used), Collet head, pressure collet, collet sleeves, collet, tool holder, tool holder, milling chuck, milling tool, collets Itedpfxeyknlho Abyok -Clamping sleeves: Ø23 x 33 mm, 81 pieces Sizes: Ø 4/5/6/8/10/12 mm, see photos / parts list -Price/Fee: complete -Transport dimensions: 555/205/H190 mm -Weight: 15.2 kg

Condition: excellent (used), Tool holder, milling holder, milling tool, milling mandrel -Milling tool holder: SK40 tool holders -Cutter holder: Ø 6 mm Isdjy Tlc Rspfx Abyotk -Number: 35 milling tool holders available -Price: per piece -Dimensions: Ø 64 / 120 mm -Weight: 0.9 kg

Condition: good (used), Granule dryer, granule drying plant, granule conveyor, vacuum conveyor, vacuum station, drying container -Manufacturer: Helios, Drying container granule dryer Heliostat WFAT-8490 -Type: WFAT-8490 -Granule conveyor: Vari Color Vacumat type VM 5/BS -Individual components: see photos -Number: 4 devices available -Price: per piece -Dimensions: 820/550/H2460 mm -Weight: 96 kg/unit Itedpfew Tig Sex Abysk

Condition: reconditioned (used), Year of construction: 1998, functionality: fully functional, machine/vehicle number: 265134, warranty duration: 6 months, year of last overhaul: 2026, Equipment: type plate available, Multimatic MUS 6 WP Bakery Divider. Fully automatic machine for dividing and rounding dough. Designed for doughs with a yield (TA) of 148-160. Key features: Ijdpfx Aeuv Hrwobyjtk - Capacity: up to 12,000 pieces/hour, - Weight range: 28 - 85 g, - Number of rows: 6, - Hydraulic system for the main piston, - Condition: as new (after complete overhaul), - Hopper volume: 50 l, - Round product, - Constructed of stainless steel.

Condition: used, Year of construction: 2020, controller manufacturer: Siemens, controller model: 840 Dsl - GROB4Pilot, _____ Description: Year of manuf. : 2020 Itodpfx Aszu H Afebyok Control : Siemens 840 Dsl - GROB4Pilot Speed : 16000 rpm Movement X/Y/Z : 1050/800/1050 mm Tool holder : HSK 63 In General: Year of manufacture:2020 Control system:Siemens 840 Dsl – GROB4Pilot Travel ranges X/Y/Z:1,050/800/1,050 mm Speed:16,000 rpm Tool holder:HSK 63 Fluid supply:coolant + blast air Spindle: Technology:Direct drive spindle Speed:16,000 rpm Max. torque:206 Nm Max. power:32 kW Tool holder:HSK 63 NC rotary table: Technology:NC rotary table with pallet clamping system B-axis:0.001° Pallet size:630 x 800 mm (630 x 630 mm) Fluid connections:6 Tool magazin: Technology:4-disc magazine Number of stations:237 Tool changer:Pick-up Tool cleaning:Mechanical Equipment: Position measurement systems:Direct on all axes (glass scales) Chip removal:Chip conveyor Coolant supply:Internal coolant system, 80 bar Hydraulic clamping:4 clamping circuits, 30–190 bar Support control:Pneumatic Touch probe:Renishaw OMP 60 Tool measurement:Length measurement Set-up bay door:Can be operated automatically or manually Emulsion mist separator:Mechanical Pallets I:2 pieces 630 x 800 mm Pallets II:2 pieces 630 x 630 mm