Used Hidraulinis Presas 250 T Metal Press for sale (100,595)

Condition: as good as new (ex-display), Year of construction: 2023, pressing force: 120 t, table length: 600 mm, table width: 600 mm, Here are the technical data of the offered machine: Technical data + information: HB 2021-A-188, oil hydraulic double column press 120 T bottom piston heating press. - idle speed up to 40 mm/sec - Opening speed up to 40 mm/sec - Starting press speed 5-15 mm/sec - Table size/heating plate size 600 × 600 mm - ram size/heating plate size 600 × 600 mm - 2 heating plates, electrically heated, up to 250 degrees - as OPTION - total size approx. 2000 × 1000 × 2800 mm height - Oil temperature control - Automatic lubrication - Free positioning of the ram - SICK/LEUTZE light barriers 14,1 mm on front side - Circuit oil cooling - Pressure holding valve 0 to 1800 sec. - Rear monitored door - Pressure adjustment from 30 T to 120 T - Travel limitation either by pressure or position - Programming set-up mode, single stroke (adjustable via rotary switch) - Control panel permanently installed in cabinet wall Kledpfx Afjk S Dt Tedsr - Two-hand operation - Machine body double painted - Signal light: red: alarm, yellow baking phase, green: ready - Heating plates with electric heating rods, up to max. 250 degrees - Assembly, commissioning, instruction against separate charge Thermally neutral 80 - 120 °C Number of operating sides 1 side Forces Pressing force max. 1,600 kN Free ripping force max. 200 kN Pressure build-up time closed die steel to steel Max. 8 sec. Dimensions Max. Opening width per compartment 200 mm Stroke and min. opening per compartment 400/200 mm Table height above floor, without heating pl. 850 mm Height above floor (overall height) approx. 2.800 mm Hall height min. 3,500 mm Parallel deviation at 20 °C +/- 0.1 mm Deflection Determined at max. clamping force with 70 % occupancy ≤ 0.2 mm/m Total weight of the press without operating materials approx. 9 to Accessories: 4 HEATING PLATES 500 × 400 mm, max. heating capacity Equipped with temperature sensor 300 degrees Speeds Fast closing with 15 mm sec. Pressing speed 10 mm sec. Sound pressure level, measured at 1.5 m height at the control panel according to DIN 45635-T16-KL3 max. 8 db(A) Number of pressing cylinders 1 pc. Operating pressure max. 240 bar Pressing pressure build-up time 4 sec. Pressure accuracy during pressing stroke +/- 5 bar Main pump BOSCHREXROTH gear pump approx. 48 L/min Oil volume approx. HLP 46 MW 300 liters Ambient temperature max. 40 °C Oil temperature max. 55 °C Automatic pressure readjustment after 5 % pressure loss Pressure stabilization for up to 1800 sec. Electrical system Main supply 400 V AC Control voltage Hydraulic pumps 24 V DC 24 V DC Frequency 50 Hz Connection hydraulic main motor 15 kW Total connection approx. without heating plates 19 kW ##### If the press does not exactly meet your requirements, please click to request an individual offer exactly according to your needs: Contact us for an individual offer HIDROBRASIL manufactures presses exactly according to your requirements at surprisingly low prices! Our great strength is special machine construction and press automation. We sell customized hydraulic presses, press brakes and impact shears at surprisingly low prices. For the hydraulics of the presses we mainly use components of leading European manufacturers.

Condition: used, Year of construction: 2008, turning diameter over bed 280 mm Turning diameter over slide 170 mm Kedpfx Asyv Nrhefdslr centre height 220 mm centre distance 1600 mm Spindle Speed 25-1320 UpM spindle bore 75 mm tailstock quill taper MT 4 weight of the machine ca. 2025 kg

Condition: used, mileage: 368,811 km, power: 184 kW (250.17 HP), first registration: 12/2015, fuel type: diesel, overall weight: 18,000 kg, axle configuration: 2 axles, color: white, gearing type: automatic, emission class: euro6, loading space volume: 45 m³, loading space length: 8,050 mm, loading space width: 2,500 mm, loading space height: 2,240 mm, Year of construction: 2015, Equipment: ABS, air conditioning, tail-lift, P 250 Refrigerated Box 8.10 m with Tail Lift 2,000 kg Palfinger * FRIGOBLOCK FK 24 Travel and Parking Cooling 380 V ELECTRIC * Vehicle No. for customer inquiries: 4318 * Air conditioning * Parking aid with camera * Environmental sticker (green) * Air suspension * Tail lift * Central locking * Cruise control * Anti-lock braking system (ABS) * Two-seater * Power steering * Electric side mirrors * Service history maintained * Fog lights * 2/3 doors No liability for printing or typographical errors Sale to businesses only Subject to errors and prior sale* Changes, prior sale, and errors are expressly reserved. The description serves to identify the vehicle and does not constitute a warranty under sales law. The description in the purchase contract is decisive. * TOP SERVICE + QUALITY * We are happy to provide you with a LEASING, FINANCING, or HIRE PURCHASE offer. Warranty insurance available upon request from the insurer. * TÜV / UVV LBW / tachometer inspection and OBU device installation by our local partners. * Customs license plate valid for 30 days. All customs documents for export are available, but must be requested separately. * Toll Collect can be booked in-house. Kjdpfxswmxtis Afdjlr * Free transfer from Stuttgart Airport or Metzingen (Württemberg) train station. * ARRIVAL STATION: 72555 METZINGEN/WÜRTT. * FOR ENGLISH * Andreas Pittas * Thomas Pittas * Alexander Pittas * Robin Pittas WHATSAPP Number * * --- Visit us on our website at * Over 200 vehicles always in stock.

Condition: as good as new (ex-display), Year of construction: 2022, pressing force: 400 t, Press design double column press Thermally neutral 80 - 120 °C Number of operating sides 1 side Forces Pressing force max. 4000 kN Free ripping force max. 400 kN Pressure build-up time Closed die steel to steel Max. 4 sec. Dimensions 3,800 mm long and 4,475 mm wide Kodpfjph Uk Nex Afdjlr Max. Opening width 800 mm Stroke 800 mm Table height above floor 1100 mm Height above floor (headroom) approx. 4300 mm Hall height min. 5500 mm parallel deviation at 20°C +/- 0,1 mm Deflection Determined at max. clamping force with 70% occupancy < = 0.2 mm/m Weight Total weight of press without operating materials and table plate approx. 28 t Press table Table size 1500x1500 mm Speeds Fast closing with 100 mm sec. Pressing speed 8 - 3 mm sec. Sound pressure Sound pressure level, measured at 1.5m height at the control panel according to DIN 45635-T16-KL3 max. 78 db(A) Hydraulics Number of pressing cylinders/driving cylinders 1 pc. Operating pressure max. 300 bar Pressing pressure build-up time 4 sec. Pressure accuracy during pressing stroke +/- 3 bar Main pump BOSCHREXROTH axial piston pump approx. 145 L/min Oil volume approx. HLP 46 MW 1000 liters Ambient temperature max. 40 °C Oil temperature max. 55 °C Flow temperature °C Auxiliary pump BOSCHREXROTH, gear pump 10 L/min Pressure stabilization for up to 300 sec. Electrical system Main supply 400 V AC Control voltage 24 V DC Frequency 50 Hz Connection hydraulics main motor 40 kW Sliding table press with 400 T capacity, Closing speed up to 100 mm/ ( adjustable via touch screen ) Opening speed up to 100 mm/sec ( adjustable via touch screen ) Starting press speed 10 mm/sec ( adjustable via touch screen ) table top size 1500x1500mm ram size approx. 1600x1500mm Oil temperature monitoring 55 degree warning, 60 degree shutdown Automatic lubrication ( adjustable via touch screen ) Free positioning of the ram ( adjustable via touch screen ) SICK/PILZ light barriers 14 mm, front, up to 1800 mm height Hydraulic and mechanical ram protection Circuit oil cooling ( adjustable via touch screen ) Ejector in table, 20 T press force, 350mm travel Ejector moves outwards with the table Table plate milled flat, with DIN 22 T grooves Pressure adjustment from 60 T to 400 T ( adjustable via touch screen ) Travel limitation either by pressure or position Set-up mode, single stroke and cycle sequence ( adjustable via touch screen ) Swiveling control panel on the cabinet Two-hand operation, with opening button, manual/single stroke/cycle switchover button Installation, commissioning, instruction against separate charge The control is supplied by SIEMENS. ( S 7 1200 ) Also the touch screen monitor with 9 inch. The remote maintenance unit SECOMEA -Ethernet is included in the delivery. The side of the press has two 1000 mm high and 800 mm wide windows with double doors. (sliding table press, hydraulic press, hydraulic press, double column press)

Condition: used, Year of construction: 2021, machine/vehicle number: HB 2022-A-073, pressing force: 300 t, Portal straightening press with 300 T capacity a) idle and pressing speed up to 17 mm/sec. b) opening speed up to 55 mm/sec c) table size 2500x1600mm d) open height 700 mm e) total size approx. LBH 4500 x 2300 x 3700 mm f) Oil temperature indicator on the tank g) Lubrication via grease nipple h) table in grid construction,with T grooves according to customer's request, otherwise 22mm i) operation on swivel arm, mounted on the bridge j) pressure adjustment from 50 T to 300 T via MONITOR k) bridge moves by two gear motors, via racks l) Cylinder moves to the left and to the right via toothed racks m) Machine body double painted n) Cylinder induction hardened Type of construction Press design PORTAL PRESS Thermally neutral 80 - 120 °C Number of operating sides 3 side Forces Pressing force max. 3,000 kN Free ripping force max. 500 kN Pressure build-up time Closed die Steel to steel Max. 3 sec. Dimensions Max. Opening width 700 mm Stroke and min. opening 700 mm/ 0 mm Table height above floor approx. 9ß0 mm Height above floor (headroom) approx. 3700 mm Hall height min. 5.000 mm Deflection Determined at max. clamping force with 70% occupancy < = 0.8 mm/m Weight Total weight of press without operating materials and table plate approx. 22 T Speeds Fast closing with 17 mm sec. Pressing speed 8 mm sec. Opening 55 mm sec. Sound pressure Sound pressure level, measured at 1.5m height at the control panel after max. 78 db(A) DIN 45635-T16-KL3 Hydraulics Number of pressing cylinders 1 pc. Kljdpfjh Agnujx Afdsr Operating pressure max. 350 bar Pressing pressure build-up time 02. mz sec. Pressure accuracy during pressing stroke +/- 5 bar Main pump BOSCHREXROTH approx. 93 L/min Oil volume approx. HLPD 46 MW 900 liters Ambient temperature max. 45 °C Oil temperature max. 55 °C Electrical system Main supply 400 V AC Control voltage 24 V DC Frequency 50 Hz Hydraulic connection Main motor IE3 22 kW Total connection Approx. 30 kW

Condition: as good as new (ex-display), Year of construction: 2021, pressing force: 400 t, Gantry straightening press with 400 T capacity a) idle and pressing speed up to 17 mm/sec. b) opening speed up to 60 mm/sec c) table size 6000x3000mm d) open height 1500 mm e) total size approx. LBH 6000 x 5000 x 4500 mm f) Oil temperature indicator on the tank g) Lubrication via grease nipple h) Table in grid construction, i) operation on swivel arm, mounted on the bridge j) pressure adjustment from 60 T to 400 T via MONITOR k) Bridge moves by two gear motors, via toothed racks l) Cylinder moves to the left and right via toothed racks m) Machine body powder coated, or double painted n) T-slots according to customer requirements o) cylinder induction hardened PORTAL PRESS Thermally neutral 80 - 120 °C Number of operating sides 3 side Forces Pressing force max. 4000 kN Free ripping force max. 600 kN Pressure build-up time Closed die Steel to steel Max. 3 sec. Dimensions Max. Opening width 1500 mm Stroke and min. opening 1500 mm/ 0 mm Table height above floor approx. 900 mm Height above floor (headroom) approx. 4500 mm Hall height min. 5500 mm Deflection Determined at max. clamping force with 70% occupancy < = 0.8 mm/m Weight Total weight of press without operating materials and table plate approx. 52 T Kledpohyc Nwjfx Afder Speeds Fast closing with 17 mm sec. Sound pressure Sound pressure level, measured at 1.5 m height at the control panel according to DIN 45635-T16-KL3 max. 78 db(A) Hydraulics Number of pressing cylinders 1 pc. Operating pressure max. 280 bar Pressing pressure build-up time 2-3 sec. Pressure accuracy during pressing stroke +/- 5 bar Main pump BOSCHREXROTH approx. 150 L/min Oil volume approx. HLPD 46 MW 900 liters Ambient temperature max. 45 °C Oil temperature max. 55 °C Electrical system Main supply 400 V AC Control voltage 24V DC Frequency 50 Hz Connection hydraulics Main motor IE3 30 kW Total connection Approx. 35 kW

Condition: as good as new (ex-display), Year of construction: 2020, pressing force: 20 t, Double column press 20 T capacity, a) Closing speed up to 10 mm/sec b) opening speed up to 30 mm/sec c) table size between columns 1400x1100 mm d) ram size between columns 1400x1100 mm e) Manual lubrication (via grease nipple) f) UKF pump-cooling-filtration ( electrical cooling ) g) Pressure adjustment from 4 T to 20 T ( adjustable via rotary control ) h) Travel adjustable via slide control Type of construction Press design Double column press ,hydraulic Thermally neutral 80 - 120 °C Number of operating sides 1 side Forces Pressing force max. 200 kN Free ripping force max. 20 kN Pressure build-up time Closed tool Steel on steel Max. 4 sec. Dimensions Kjdpfx Afshmbhqsdslr Max. Opening width 500 mm Stroke 300 mm Table height above floor, approx. 900 mm Height above floor (headroom) approx. 2800 mm Hall height min. 3,500 mm Parallel deviation at 20°C #ERROR! mm Deflection Determined at max. clamping force with 2/3 occupancy < = 0.4 mm/m Weight Total weight of the press without operating materials approx. 3 to Table cut-out Size 1100x850 mm Speeds Fast closing with 9 mm sec. Pressing speed 9 mm sec. Sound pressure Sound pressure level, measured at 1.5m height at the control panel according to DIN 45635-T16-KL3 max. 78 db(A) Hydraulics Number of press/driving cylinders 2 pcs. Operating pressure max. 280 bar Pressing pressure build-up time 3-5 sec. Pressure accuracy during pressing stroke +/- 5 bar Main pump BOSCHREXROTH/PARKER approx. 35 L/min Oil volume approx. HLP 46 D 150 litres Ambient temperature max. 40 °C Oil temperature max. 55 °C Flow temperature °C Circulation pump for cooling ACS approx. 6.5 L/min Electrical system Main supply 400 V AC Control voltage 24 V Frequency 50 Hz Hydraulic connection Main motor 3 kW Total connection Approx. 5 kW

Condition: new, Year of construction: 2021, pressing force: 10 t, Single-column press with 10 T capacity, suitable for continuous shift operation, with these basic data: a) Traversing speed 0 - 10 mm/sec. downwards, b) Opening speed up to 25 mm/sec c) Starting press speed 10 mm/sec, adjustable from 0 to 10 mm/sec. d) Table size 600x300 mm e) Ram size 300x300 mm, with T-slots and central cylinder clamping f) Overall size approx. 1100x600x1850 mm g) Oil temperature display on oil tank h) Pressure setting from 0.5 T to 10 T (adjustable via rotary control) i) Cable remote control for downward/upward movement j) Machine body powder coated, or double painted k) Control cabinet supply cable from above with 3000 mm cable and 16 ampere plug l) Assembly, commissioning, instruction at extra charge Type of construction Press design Single-column press Thermally neutral 80 - 120 °C Number of operating sides 1 side Forces Max. pressing force (at 250 bar) 100 kN Free ripping force max. 10 kN Pressure build-up time Closed tool Steel on steel Max. 2 sec. Dimensions Kjdpfx Aehma Smofdelr Max. Opening width 800 mm Stroke and min. opening 500/300 mm Table height above floor 850 mm Height above floor (headroom) approx. 2850 mm Hall height min. 3,500 mm Parallel deviation at 20°C #ERROR! mm Deflection Determined at max. clamping force with 70% occupancy < = 0.1 mm/m Weight Total weight of the press without operating materials approx. 1.6 to Speeds Fast closing with 10 mm sec. Press speed 10 - 0 mm sec. Sound pressure Sound pressure level, measured at 1.5 m height at the control panel according to DIN 45635-T16-KL3 max. 78 db(A) Hydraulics Number of pressing cylinders 1 pc. Operating pressure max. 250 bar Pressing pressure build-up time . 2 sec. Pressure accuracy during pressing stroke #ERROR! bar Main pump Gear pump approx. 6 L/min Oil volume approx. HLP 46 MW 80 litres Ambient temperature max. 40 °C Oil temperature max. 55 °C Flow temperature °C Electrical system Main supply 400 V AC Control voltage 24 V DC Frequency 50 Hz Hydraulic connection Main motor 2.2 kW Total connection Approx. 3 kW

Year of construction: 2021, condition: new, pressing force: 50 t, Here are the technical data of the offered machine: If the press does not exactly meet your requirement profile, please click to request an individual offer exactly according to your needs: Contact us for an individual offer HIDROBRASIL manufactures presses exactly according to your requirements at surprisingly low prices! Technical data + information: hydraulic 50 T heating press for laboratories It is a lower piston press with an open height of 400 mm ram travel 300 mm heating platen capacity up to 250 degrees heating plate size 200x200mm weight about 1500 kg height 1950 mm hydraulics built in the press body Hydraulic tank with 100 l monitored vertical door for the press chamber pressure, position - and speed adjustable via SIEMENS S 7 1200 SIEMENS touch screen monitor with 9 inch Safety technology from SICK (C-press, hydraulic press, hydraulic press, laboratory press, laboratory) Kodpfx Ajgrkigefdolr Are you looking for a custom-fit machine? Contact us for an individual offer. Our hydraulic presses are manufactured according to German machinery directives, as well as European machinery directives (Directive 2006/42/EC), EC standards and EU safety regulations. Furthermore our presses exceed the Canadian and European safety requirements, because they correspond in all points to the national Brazilian safety guideline NR 12, which is based on these. Our great strength is the special machine construction and the press automation. We sell customized hydraulic presses, press brakes and impact shears at surprisingly low prices. For the hydraulics of the presses we mainly use components of leading European manufacturers.

Condition: as good as new (ex-display), Year of construction: 2021, pressing force: 20 t, Hydraulic 20 T single-column production press for the manufacture of lightweight concrete parts. Here are the technical data of the offered machine: If the press does not exactly meet your requirements, please click here to request an individual offer exactly according to your wishes: Contact us for an individual offer HIDROBRASIL manufactures presses exactly according to your wishes at surprisingly favourable prices! Technical data + information: a) Closing speed up to 10 mm/sec b) Opening speed up to 20 mm/sec c) Maximum open height 300 mm d) Pressing speed 4 - 10 mm/sec. ( adjustable via rotary control ) e) Die size 600x800 mm f) Ram size 950x600 mm g) Manual lubrication (via grease nipple) h) Pressure setting from 5 T to 20 ( adjustable via rotary control ) i) Travel 300 mm j) Installation, commissioning, instruction at extra charge Technical Data Press type C Press, hydraulic Thermal neutral 80 - 120 °C Number of operating sides 1 side Forces Pressing force max. 200 kN Free ripping force max. 10 kN Pressure build-up time Closed die Steel on steel Max. 3 sec. Dimensions Max. Opening width 350/50 mm Stroke 300 mm Table height above floor, approx. 900 mm Height above floor (headroom) approx. 1900 mm Hall height min. 2,500 mm Parallel deviation at 20°C +/- 0.4 mm Deflection Determined at max. clamping force with 2/3 occupancy < = 0.6 mm/m Weight Total weight of the press without operating materials approx. 2.2 to Speeds Fast closing with 10 mm sec. Press speed 10-5 mm sec. Sound pressure Sound pressure level, measured at 1.5m height at the control panel according to max. 78 db(A) DIN 45635-T16-KL3 Hydraulics Number of press cylinders 1 pc. Plus 1 ejector, 110 mm stroke, max. operating pressure 255 bar Pressing pressure build-up time 03. apr sec. Pressure accuracy during pressing stroke +/- 5 bar Main pump BOSCHREXROTH/ASC approx. 6 L/min Oil volume approx. HLP 46 D 100 litres Ambient temperature max. 40 °C Oil temperature max. 55 °C Kjdpfeia Nc Tox Afdjlr Flow temperature °C Electrical system Main supply 400 V AC Control voltage 24 V Frequency 50 Hz Hydraulic connection Main motor 3 kW Total connection Approx. 4 kW (C-press, hydraulic press, hydraulic press, concrete press) Are you looking for a customised machine? Contact us for an individual offer. Our hydraulic presses are manufactured in accordance with German machinery directives, as well as European machinery directives (Directive 2006/42/EC), the EC standards and EU safety regulations. Furthermore, our presses exceed the Canadian and European safety requirements, as they comply in all points with the national Brazilian safety directive NR 12, which is based on these. Our great strength is the construction of special machines and press automation. We sell customised hydraulic presses, press brakes and impact shears at surprisingly favourable prices. For the hydraulics of the presses, we mainly use components from leading European manufacturers.

Condition: good (used), Year of construction: 2001, CNC lathe Manufacturer: OKUMA Type: LB-250T Model: OSP-U10L YEAR OF MANUFACTURE: 2001 2-axis CNC lathe with robotized loading Klsdpfsk Hz Iwex Afdor Description: two-axis X-Z lathe for short workpieces and with a robotized workpiece magazine X-AXIS: 180 mm Z-AXIS: 325 mm Spindl: 4500 1/min Coolant system and chip conveyor

Condition: used, machine/vehicle number: YV2T0X1A4FZ103767, mileage: 704,656 km, power: 188 kW (255.61 HP), first registration: 09/2015, fuel type: diesel, tire size: 285/70 R19.5, axle configuration: 4x2, wheelbase: 5,600 mm, fuel: diesel, fuel tank capacity: 300 l, color: white, driver cabin: day cab, gearing type: automatic, emission class: euro6, suspension: air, number of seats: 2, total length: 9,300 mm, total width: 2,550 mm, loading space length: 7,400 mm, loading space width: 2,440 mm, loading space height: 2,550 mm, Year of construction: 2015, Equipment: air conditioning, central locking, cruise control, electric window regulation, power mirror, spoiler, tail-lift, = Additional options and accessories = - Drivers seat comfort 5 - Heated exterior mirrors - Preparation OBU - Remote central locking - Roof Spoiler - Side door - Sun visor - Tailgate = Remarks = Tailgate Plateau length: 255 cm Structure Construction year: 2015 Material: Plywood = More information = Technical information Number of cylinders: 6 Engine capacity: 7.698 cc Kjdpfx Ajytgidjfdelr Drivetrain Engine type: Volvo I SYNC Axle configuration Tyre size: 285/70 R19.5 Suspension: air suspension Front axle: Max. axle load: 5000 kg; Tyre profile left: 80%; Tyre profile right: 80% Rear axle: Double wheels; Max. axle load: 8480 kg; Tyre profile left inner: 80%; Tyre profile left outer: 80%; Tyre profile right outer: 80%; Tyre profile right outer: 80% Weights Empty weight: 8.537 kg Carrying capacity: 3.553 kg GVW: 11.990 kg Functional Tail lift: HOLLANDIA DHLM, tail lift, 2500 kg Maintenance APK (MOT): tested until 06/2026 Identification Registration number: 62-BLB-4

Condition: used, Double disc press 520 t Kedpfx Ajyxm U Ssfdolr

Condition: like new (used), Year of construction: 2022, machine/vehicle number: DF0147, Pressure: 150 t Total power requirement: 20 kW Machine weight approx.: 11.5 t space requirement approx.: 8800 x 1800 x 2200 mm pressure setting infinitely variable via rotary control : 15-150 t cylinder diameter : 100 mm pressing speed (infinitely variable via joystick) : 0-9,9 mm/s servo motor : 2 kW cooling unit : 1 kW Oil tank (under press table): 350 l Oil cooling (electric): 1 kW (max) Profile straightening press 150 T with two pressure cylinders. The straightening machine is prepared for the particular type of material by interchangeable rounded spacer elements. The replacement of the 10 inserts is done manually by simply pushing them into the holding grooves. The scope of delivery includes basic equipment for one profile. The program for the respective profile is then called up on the monitor. The monitor shows the ideal line and, in addition, an ascending and descending millimeter scale with 0.5 mm lines. The profile to be straightened is now placed on the left side of the table, pushed against a holder and clamped with a quick-clamping device. Both the holder and the quick-clamping device are mounted on a clamping plate for quick adjustment. This clamping plate moves on a linear guide from left to right and vice versa. Transport is by a chain drive and a servo motor. The movement is triggered by a joystick on the control panel. After the profile has been clamped, the operator moves the clamping platen into the press using the joystick. The travel speed is up to 100 mm per second, but can be continuously adjusted down to 10 mm per second. To do this, it is sufficient to pull the lever of the control system slightly less. A high-resolution camera now shows the profile in the press. The operator sees exactly the deviation from the ideal line. Depending on the need, he now pushes or pulls the profile to the desired accuracy. He then continues to move slowly through the press, seeing in detail on the monitor whether the profile is now straight. Depending on the need, he can now move the profile forwards or backwards and readjust it. After the profile has been straightened, it moves out of the press on the right and can be removed. If desired, the clamping platen now moves back to the loading position on the left or it is now loaded from the right to save time. Kodpfxsfxygws Afdjlr The press may only be operated under the following conditions: Perm. ambient temperature: 5-60 °C Permissible relative humidity: at 20°C - 90%, at 40°C - 50% Height of the installation site NN: + 1000 m Perm. fluctuations E-mains: +/- 10%.

Condition: as good as new (ex-display), Year of construction: 2021, pressing force: 135 t, It has a cylinder for 10 to 135 T and a small additional cylinder for 1500 kg to 7 T. Empty speed 2-10mm second pressing speed 2 mm second table size 1100x650x120mm 800 mm maximum open height table height max. 900 mm travel of the cylinder is 400 mm total height 2900 mm weight 2,3 T 200 L tank Pump with 60 L capacity 5 KW main motor Control system PLC SIEMENS or PILZ RSS4000- S 7 1200 Ksdoigg E Hopfx Afdolr Safety control system PILZ Communication operator/press Color touch screen 10" OMRON/SIEMENS

Condition: used, 2 clamping plates, 1 pair of clamping rails with T-slots Clamping block, press table, auxiliary table with T-slots Kodpfsxf Uwljx Afdelr Length per clamping rail: 900 mm Width per clamping rail: 295 mm Thickness per clamping rail: 130 mm - 6x T-slots, 30 mm - T-slot spacing: 150 mm - 6 holes Ø 18 mm (spacing 300 x 160 mm) - All sides machined surfaces Net weight per clamping rail: 240 kg Net weight of both clamping rails: 480 kg Good condition

Condition: new, Year of construction: 2021, pressing force: 17 t, Here are the technical data of the offered machine: If the press does not exactly match your requirement profile, please click to request an individual offer exactly according to your needs: Contact us for an individual offer HIDROBRASIL manufactures presses exactly according to your requirements at surprisingly low prices! Technical data + information: Hydraulic 17 T single column press Single column press with 17 T capacity, suitable for continuous shift operation, with these basic data: a) Traversing speed 10 mm/sec. downwards, b) opening speed up to 25 mm/sec c) starting pressing speed 10 mm/sec. d) table size 400x400 mm e) ram size 200x200 mm, with T grooves and central cylinder clamping f) Overall size approx. 1150x800x1750 mm g) oil temperature display on oil tank h) pressure adjustment from 5 T to 17 T ( adjustable by knob ) i) Hand lever operation with two speeds j) Machine body powder-coated, or double-painted k) Control cabinet supply line from above with 3000 mm cable and 16 Ampere plug l) assembly, commissioning, instruction against separate calculation Press design Single column press Thermally neutral 80 - 120 °C Klsdpjgrki Sofx Afdjr Number of operating sides 1 side Forces Press force max. ( at 250 bar ) 170 kN Free ripping force max. 10 kN Pressure build-up time Closed die Steel to steel Max. 2 sec. Dimensions Max. Opening width 250 mm Stroke and min. opening 100 mm Table height above floor 850 mm Height above floor (headroom) approx. 2200 mm Hall height min. 2.500 mm parallel deviation at 20°C +/- 0,1 mm Deflection Determined at max. clamping force with 70% occupancy < = 0.3 mm/m Weight Total weight of press without operating materials approx. 1 to Speeds Fast closing with 10 mmSec. Press speed 10 - 0 mmSec Sound pressure Sound pressure level, measured at 1.5m height at the control panel according to DIN 45635-T16-KL3 max. 78 db(A) Hydraulics Number of pressing cylinders 1 pcs. Operating pressure max. 250 bar Pressing pressure build-up time . 2 sec. Pressure accuracy during pressing stroke +/- 5 bar Main pump Gear pump approx. 6 L/min Oil volume approx. HLP 46 MW 100 liters Ambient temperature max. 40 °C Oil temperature max. 55 °C Flow temperature °C Electrical system Main supply 400 V AC Control voltage hydraulic pumps 24 24 V DC V DC Frequency 50 Hz Hydraulic connection Main motor 2.2 kW Total connection Approx. 3 kW Design The press is designed as an oil-hydraulic single-column press. The hydraulic system and the tank are located on the top and inside of the press, respectively. Hydraulic unit The hydraulic system is mounted on the top of the press. Safety devices For the scope of delivery described, the press complies with the valid safety regulations according to UVV, as well as with the standards and directives valid for the EU, in each case in the latest version. Electrical system / control system The control cabinet with control, power and safety components is located on the right side of the press. The press is operated by a hand lever control.

Condition: used, maximum load weight: 11,910 kg, overall weight: 18,000 kg, axle configuration: 2 axles, first registration: 03/2016, loading space length: 7,500 mm, loading space width: 2,500 mm, loading space height: 2,900 mm, total width: 2,600 mm, total height: 4,000 mm, Year of construction: 2016, Equipment: tail-lift, Further information: * Unladen weight: 6,090 kg * Tyre size | Front axle: 445/45 R19.5 * Tread depth inner left | Front axle: 40% * Tread depth inner right | Front axle: 40% * Maximum axle load | Front axle: 9,000 kg * Tyre size | Second axle: 445/45 R19.5 * Tread depth inner left | Second axle: 40% * Tread depth inner right | Second axle: 40% * Maximum axle load | Second axle: 9,000 kg * Tail lift | Manufacturer: DHOLLANDIA * Tail lift | Lifting capacity: 2,000 kg * Price on request: Yes * Position | Front axle: Rear Kledsynxbbspfx Afder * Brake type | Front axle: Disc brakes * Suspension | Front axle: Air suspension * Position | Second axle: Rear * Brake type | Second axle: Disc brakes * Suspension | Second axle: Air suspension * Tail lift | Type: Tuck-away and slide tail lift Additional features: * Rear doors * Homepage * SemCollection Semtrade B.V. Contact | Martin Klaaijsen | Tel: | Whatsapp: | Email: Export costs | Please inquire in advance about the costs and procedures for your respective country Location | Maasdijk (NL) | 140 km from the border | 20 km from Rotterdam The Hague Airport Disclaimer: Subject to change, prior sale and errors excepted

Condition: as good as new (ex-display), Year of construction: 2024, machine/vehicle number: DHD/250/100, functionality: fully functional, input voltage: 400 V, pressing force: 250 t, stroke length: 600 mm, operating speed: 170 mm/s, reverse speed: 250 mm/s, table width: 1,200 mm, table length: 1,000 mm, ram plate width: 1,200 mm, ram plate length: 1,000 mm, total length: 2,000 mm, total width: 2,700 mm, total height: 4,500 mm, control cabinet height: 1,800 mm, control cabinet length: 800 mm, control cabinet width: 500 mm, die cushion force: 100 t, die cushion stroke: 200 mm, electrical fuse: 63 A, installation height: 900 mm, pressure: 235 bar, Euroblech 2024 trade fair machine - Hamburg location. Kledpfx Afettriasdsr

Condition: used, CNC press brake FASTI type 904-125/30 serial no. 95-904-5775 year of construction 1995 Pressure capacity 125 ton. Working length 3050 mm Stroke approx. 335 mm Stand projection 300 mm Clearance between the side uprights 2550 mm Tool installation height max. 465 mm (opening width between the tool holders) Table width 90 mm (the clamping system is mounted on the table) Table height above floor 875 mm (910 mm with clamping system) Backgauge X-axis 500 mm Backgauge R-axis 115 mm Backgauge Z-axis approx. 1950 mm Kledpfxshmmfks Afdor Lowering speed Y rapid traverse 90 mm/s Lowering speed Y-operation 8.9 mm/s Return stroke speed Y-retraction 75 mm/s Oil filling approx. 160 liters Motor power 18.5 kW Mains connection 400 Volt, 50 Hz, 20 Amp. - 7-axis CNC control DELEM type DA 58 with LCD screen - 1 axis for back gauge - stop depth (X-axis) - 2 axes for back gauge - fence height (finger R1 + finger R2) - 2 axes for back gauge - stop finger, laterally movable (finger Z1 + finger Z2) - 2 axes for press beam with servo valves and measuring system Y1 and Y2 - Operation via electric foot switch and 2-hand control panel or 2-hand control panel only - Hydraulic tool clamping for the TRUMPF upper tool system, with 20 mm clamping groove - Hydraulic tool clamping for the lower tool with 13 mm table groove, depth 21 mm (tool pin 13 x 20 mm) - FIESSLER safety light barrier, type AKAS - 2 material support arms at the front, manually movable to the side and height-adjustable - Electrical diagram, hydraulic diagram, user manual for control available - Control cabinet on the machine - without tools Space requirement L x W x H 5000 x 2500 x 3050 mm Transport dimensions L x W x H 5200 x 1900 x 2950 mm Weight 8.5 tons. Good condition

Condition: used, 12-piece die block for GEWA press brake Bending tool for press brake, lower tool Type: 0255/14 V-block size: 16 mm for 90° Klsdpfewbvmisx Afdor V-block angle: 88° Die depth: approx. 8 mm Height: 120 mm Max. pressure per meter: 100 t/m Die base width: 60 mm Total length: 4175 mm Segment lengths: 4 x 835 mm, 1 x 400 mm, 1 x 200 mm, 1 x 100 mm, 1 x 50 mm, 1 x 40 mm, 1 x 20 mm, 1 x 15 mm, 1 x 10 mm Weight: 110 kg Very good condition

Condition: used, Hand - swing bending machine KRAMER type AMS 650 x 1,5 Hand swivel bending machine, press brake year of construction approx. 1985 working length 650 mm sheet thickness at 40 kg/mm2 1,5 mm upper beam opening approx. 60 mm bending beam adjustment ca- 0-25 mm Kedpfsdzqaasx Afdslr bending angle 0-180 - Upper beam adjustment via hand crank - pre-screw rail for the bending beam - one-piece sharpening rail 135° space requirement L x W x H 1200 x 600 x 1100 mm weight 160 kg good condition

Condition: new, functionality: fully functional, fuel type: hybrid, color: other, overall weight: 40,000 kg, Year of construction: 2026, *All of our products are made with care and covered for 1 year warranty! *Installation and Operator Training FREE Fabo tracked jaw crusher FTJ 11-60 is a complete mobile system which moves on hydraulically driven tracked system with 1 km/h speeds and combination of a vibrating grizzly feeder, 1000 x 600 mm jaw crusher, foldable stockpile conveyors, control unit and electric generator. In today's conditions and technological processes, businesses are beginning to think about how to make their field of activity more efficient. As they make it more efficient, they always take into consideration factors such as the operationally of the machines they use, their low cost and staffing needs. Our Tracked Crushers can crush with high performance even on the most demanding mine sites with its specially designed body and compact structure. Customization can be done to our tracked systems by Jaw Crusher, Primary and Secondary Impact or Cone Crusher. All necessary equipment for the process is combined only single chassis and processing equipment is driven by electrical motors. Overall production capacity is 100-250 tph. Advantages of Tracked Crushers; -Heavy-duty walking tracks can reach places where ordinary machines cannot reach. -It has the appropriate dimensions and sound level to crush construction waste in the city. -The fuel consumption of the generator and walking track units are very economical. Ksdoyu Hf Uepfx Afdslr -System maintenance and management is very easy with latest technology control software. TECHNICAL SPECIFICATIONS: -Model: FTJ 11-60 -Production Capacity: 100 – 250 tons per hour -Maximum Feeding: 550 mm -Crusher Type: Jaw Crusher -SIZE: 1000x600 mm -Generator: 275 kva -CSS Setting: 40 – 150 mm -Weight: 40 tons – Low investment and operation cost – Zero substructure preparation – Easiness at usage and maintenance – Easy assembly and disassembly advantages. FOR FURTHER INFORMATION PLEASE FEEL FREE TO CALL US!!!

Condition: new, Year of construction: 2026, Sheet metal machines type RED are the trademark of the Prod Masz company. Each RED press brake has a narrow folding beam, regardless of its length, can be bent on 3 sides thanks to side cut-outs, 2 handles on both sides. An additional advantage is more space inside for a fold. Professional folding bench RED PLUS with foot pedal Technical specifications: the maximum working length: 3200 mm Bending capacity: 0.8 mm (steel) 1.2 mm (aluminium, copper, zinc) Bending beam thickness: 15 mm Bending angle: max 160 degrees Upper beam opening: 80 mm Weight: about 700 kg Roller scissors plus 350 euros The front depth stops and rear frame are also included in the price. Bending from 3 sides -> cutouts on the side Recess 60mm/45° Marking template FREE :) Price: EUR 6,600.00 Delivery costs: PLEASE ASK Kljdpfx Aocrcgqefder Delivery date: every week We are looking forward to your contact! Invoices are issued with 0% as intra-community delivery or with plus 23% of VAT.

Condition: new, Year of construction: 2026, The best-selling and reliable PROD-MASZ press brake! Fast delivery time and high quality! Bending machine from the only, genuine and reliable manufacturer PROD MASZ® Technical specifications: - maximum working width: 2140 mm - Bending performance: up to 0.8 mm (steel sheet) - Bending angle: max 145 degrees - the cut with the roller shears over the entire working width - Bending beam thickness: 15 mm - lifting of the upper beam in three positions - Upper beam stroke: 80 mm degree scale angle stop rear rack for holding the sheet metal Klsdob Eg Hyspfx Afder front depth stops - Weight: about 180 kg The roller scissors (max. cutting capacity 0.8 mm / steel) The machine complies with CE guidelines and has a 12-month guarantee. Price: € 1.050.00 Roller scissors 0.8mm - plus 350 euros Manual folding machine plus 75 euros Delivery date: every week We are looking forward to your contact! Invoices are issued with 0% as intra-community delivery or with plus 23% of VAT.