Used Hilgeland Liz Ch2 for sale (152)

Condition: used, Year of construction: 1979, functionality: fully functional, machine/vehicle number: M08L/7162, Offer Number: M08L/7162 Machinetype: 2 die - 3 blow transfer header Fjdpfxewi Tavo Afuegh Info: bushing cut-off Make: HILGELAND Type: CF5AZ Constr. year: 1979 diameter range: 8-16 mm number of dies: 2 number of stations (incl. cut off): 4 cutting length: 160 mm shaft length under head: 130 mm output - pieces/min: 100 Location: In our warehouse

Condition: used, Year of construction: 1983, functionality: fully functional, machine/vehicle number: M02L/7787, Offer Number: M02L/7787 Machinetype: trimming machine Make: HILGELAND Type: ME2VM Fgedswi S Ryopfx Afujh Constr. year: 1983 diameter range: 2,2-8 mm shaft length under head: 6-40 mm output pieces/min: 250 Location: In our warehouse

Condition: used, Year of construction: 1990, functionality: fully functional, machine/vehicle number: M06L/9048, Offer Number: M06L/9048 Machinetype: rotating 3 - die header Make: HILGELAND Type: HC5-40A Constr. year: 1990 diameter range: 6 mm Fodpfew Nxqlox Afujgh shaft length under head: 40 mm max. cut-off length: 60 mm output pieces/min: 600 Location: In our warehouse

Condition: used, Year of construction: 1978, functionality: fully functional, machine/vehicle number: M02L/8406, Offer Number: M02L/8406 Machinetype: trimming machine Make: HILGELAND Type: ME4SP Constr. year: 1978 diameter range: 5-12 mm shaft length under head: 10-130 mm output - pieces/min: 120 Fjdowi S Avjpfx Afuegh Location: In our warehouse

Condition: used, Year of construction: 1968, functionality: fully functional, machine/vehicle number: M04L/4099, Offer Number: M04L/4099 Machinetype: pointing machine Make: HILGELAND Type: PN1 Constr. year: 1968 diameter range: 2-6 mm shaft length under head: 5-50 mm output pieces/min: 180 Location: In our warehouse Fsdswi Tcdopfx Afuogh

Condition: used, Year of construction: 1970, functionality: fully functional, machine/vehicle number: M04L/8429, Offer Number: M04L/8429 Fgodpfswi S Daex Afush Machinetype: pointing machine Info: vibratory feeder Make: HILGELAND Type: PN6 Constr. year: 1970 diameter range: 20 mm shaft length under head: 180 mm output pieces/min: 90 Location: In our warehouse

Condition: used, Year of construction: 1984, functionality: fully functional, machine/vehicle number: M14L/8571, Offer Number: M14L/8571 Machinetype: thread rolling machine - flat die Info: vibratory feeder Make: HILGELAND Type: R2LSP Constr. year: 1984 diameter range: 3-8 mm Fsdpfx Afewi Sw Heujgh shaft length under head: 150 mm max. thread length: 80 mm output pieces/min: 400 Location: In our warehouse

Condition: used, Year of construction: 1959, functionality: fully functional, machine/vehicle number: M06L/7570, Offer Number: M06L/7570 Fgjdjwi S S Djpfx Afujh Machinetype: double blow header Make: HILGELAND Type: CH1L Constr. year: 1959 diameter range: 3-6 mm shaft length under head: 6-60 mm max. cutting length: 75 mm output- piece/min: 180 Location: In our warehouse

Condition: like new (used), Year of construction: 2014, Pilot Crystallizer Mini pilot plant for margarine, shortening, puff pastry, and other products that require mixing and cooling. A complete mini laboratory plant for research and development. Including: 2 tanks, 5 liters each, for water and fat-phase ingredients. 1 buffer tank, 20 liters. High-pressure pump, up to 75 bar. 3 crystallization cylinders, named A1 + A2 + A3. 2 pin mixers, named C75 + C150. 1 rework melter, C heat. 1 resting tube, named B200. The above-mentioned units can be positioned in any possible way, for example, A1-A2-B or A1-C75-A2-A3-C150, by switching pre-assembled high-pressure piping. The crystallizer cylinders, which are scraped surface heat exchangers (SSHE), are cooled by direct evaporation using an integrated Freon cooling compressor. The tubes have a diameter of 30 mm and a length of 80 mm; the rotor is equipped with 2 scrapers, providing a surface area of 0.113 m² per tube. A temperature sensor is located after each unit. The capacity is variably adjustable, up to 50 liters per hour. Fgsdpfx Afoz Iy Hzeush Cooling system manufactured by GEA, with an integrated compressor and water-cooled condenser. There are 3 independent cooling circuits (for each crystallizer). The tanks are double-jacketed, with an agitator and temperature sensors. The entire unit is built on a frame and is mobile. The controls are integrated and tested using an HMI touch screen control panel with ‘SpecView Inc.’ software, and the controllers are from RKC systems. The unit can be controlled from the HMI by simply starting and stopping the individual components, but a recipe can also be created for controlling the motor speed, temperatures, and valves. All motors are equipped with frequency converters, Siemens micromasters and 1 x Danfoss. An integrated CIP system, with CIP circulation and a CIP concentrate hose dosing pump.

Year of construction: 2018, condition: ready for operation (used), functionality: fully functional, Turatti mod Spiralizer for vegetables year 2018 / 11 Special solution for spiral cutting of products such as carrots, zucchini, cucumbers, broccoli stalk and squash violina, to obtain spaghetti baskets, noodles or simply the helical cut of the product. Also available in a compact version. Fgsdpfsz I S Dxsx Afuoh The main features are: Cut into different shapes (spaghetti, noodles, pappardelle, etc.) Operation in continuous mode High capacity High yield Uniformity of cut Available in compact version.

Condition: used, Year of construction: 2013, HELLER 7 Machines: H 6000 MCH 280 MCH 250 We offer, directly on behalf of the owner, the following machines due to a site relocation: 7 x HELLER 4-axis horizontal machining centers Manufacturer: Heller 1. Type: H 6000 Year of manufacture: 2011 Operating hours: 28,338 Control: Simumerik 840 D solution line Travel X/Y/Z = 1,000 x 1,000 x 1,000 mm Pallet changer: 2-position Tool positions: 150 2. Type: H 6000 Year of manufacture: 2009 Operating hours: 33,963 Control: Simumerik 840 D solution line Travel X/Y/Z = 1,000 x 1,000 x 1,000 mm Pallet changer: 2-position Tool positions: 165 3. Type: H 6000 Year of manufacture: 2013 Operating hours: 26,025 Control: Simumerik 840 D solution line Travel X/Y/Z = 1,000 x 1,000 x 1,000 mm Pallet changer: 5-position Defect in spindle / B-axis 4. Type: MCH 280 Year of manufacture: 2011 Operating hours: 44,454 Control: Simumerik 840 D Travel X/Y/Z = 1,000 x 1,000 x 1,000 mm Pallet changer: 5-position Tool positions: 100 Fodpfx Aez Ihpwofujgh 5. Type: MCH250 Year of manufacture: 2008 Operating hours: 49,905 Control: Simumerik 840 D Travel X/Y/Z = 800 x 800 x 800 mm Pallet changer: 2-position Tool positions: 100 6. Type: MCH250 Year of manufacture: 2008 Operating hours: 43,820 Control: Simumerik 840 D Travel X/Y/Z = 800 x 800 x 800 mm Pallet changer: 5-position Tool positions: 100 7. Type: MCH250 Year of manufacture: 2007 Operating hours: 58,084 Control: Simumerik 840 D Travel X/Y/Z = 800 x 800 x 800 mm Pallet changer: 2-position Tool positions: 100 The sale is without clamping devices and tool holders. Further details and technical information are available upon request.

Condition: used, Year of construction: 2007, functionality: fully functional, HWACHEON HI TECH 200 B FANUC CONTROL MAX TURNING DIA 350 MM MAX TURNING LENGHT 400 250 MM HYD 3 JAW CHUCK TAILSTOCK Fgodoz N Dflopfx Afuoh SLOTTED TURRET YEAR 2007 TOOL SETTER

Condition: ready for operation (used), Year of construction: 2005, operating hours: 72,887 h, functionality: fully functional, machine/vehicle number: 32-47220, Equipment: chip conveyor, The Heller MCH 250 is a robust, horizontal 4-axis machining center manufactured by the German machine tool manufacturer Gebr. Heller Maschinenfabrik GmbH. This CNC machine is specifically designed for highly productive single-piece and series production and is frequently used for machining aluminum and steel castings. Equipment: -Horizontal spindle, 2-position pallet changer with rotary table no. 1116, chip conveyor, coolant/lubricant treatment system (manufacturer Knoll, year 2007), cooling unit, tool change system, 2nd control panel -without SL. Control system: -Siemens 840D Fgsdoz N Eykjpfx Afuoh Accessories: -Telescopic drawer cabinet, storage shelf, clamping device, step stool (3 steps)

Condition: used, Year of construction: 1998, Portal Milling Machine JOBS JOMACH 241 Year of construction: 1998 Travel X: 3400 mm Travel Y: 2700 mm Travel Z: 1250 mm Numerical Command: CNC Siemens SINUMERIC 840 D Table size: 3000 x 1500 mm Distance between uprights: 1700 mm 1 Tool Changer 32 Tools ISO 50 + 1 Tool Changer 32 Tools HSK-63 3 Milling heads - Axe C: 2 heads TWIST - ISO 50 + HSK 63 A + 1 head 3 axes ISO 50 Fedpfx Afoz Nxx Heujgh Weight: 44 T

Condition: used, Year of construction: 2017, functionality: fully functional, X-axis (planar travel): 195 mm (approx. 7.67 inches) Z-axis (longitudinal travel): 400–430 mm Tailstock travel / quill travel: 100 mm (quill stroke) Rapid traverse X-axis: 30 m/min Fgjdpfx Afjz Hwaioueh Rapid traverse Z-axis: 30 m/min C-axis (spindle indexing): 0.001° (for driven tools / MC version) Center height: 1,000 mm Max. spindle speed: 3,500 rpm Max. chuck diameter: 10 inches Max. chuck speed: 4,200 rpm Max. working area (diameter x length): Ø 325 mm x 302 mm Machine weight: 4,350 kg Operating voltage: 3 PE / 220 V (AC) Rated frequency: 50 Hz Electrical connections / power: 30 kVA Rated current: 100 A Short-circuit current strength: 5 kA Largest motor: 80 A Circuit breaker capacity: 100 A Switching capacity of protective device: 50 kA Compressed air supply: 0.5 MPa (5 bar)

Condition: excellent (used), Year of construction: 2007, operating hours: 70,000 h, functionality: fully functional, machine/vehicle number: ERGOTECH 200 - 840, clamping force: 2,000 kN, screw diameter: 50 mm, clearance between the columns: 560 mm, displacement volume: 442 cm³, mold height (min.): 340 mm, plate width: 860 mm, plate height: 860 mm, pump power: 30,000 W, The machine is fully operational and was working with injection until the end. Fgsdoyxn Tvspfx Afush

Condition: ready for operation (used), functionality: fully functional, machine/vehicle number: WJME2JSJ004169517, mileage: 148,903 km, first registration: 12/1995, fuel type: diesel, empty load weight: 12,400 kg, maximum load weight: 13,600 kg, overall weight: 26,000 kg, tire size: 315/80 R 22.5, tire condition: 90 %, axle configuration: 6x2, wheelbase: 4,500 mm, next inspection (TÜV): 10/2026, fuel: diesel, energy efficiency: F, brakes: engine braking, color: red, driver cabin: day cab, gearing type: mechanical, number of gears: 16, emission class: euro1, suspension: steel-air, number of seats: 2, total length: 9,375 mm, total width: 2,500 mm, total height: 3,600 mm, loading space length: 6,350 mm, loading space width: 2,500 mm, Year of construction: 1995, Equipment: crane, differential lock, electric window regulation, trailer coupling, truck registration, MAKE: IVECO TYPE: Hooklift + Crane MODEL: Eurotech 240 E 42 REGISTRATION DATE: 12/1995 MILES: 148903 POWER (HP/KW): 420 HP EMISSION STANDARD: Euro 1 CONDITION: Used ITEM CODE: 76250 EQUIPMENT: Hooklift with LUCCIOLA demountable body and BONFIGLIOLI model 14500 XS/2SI crane, year 1995, 2 stabilizer legs, towing hitch. LIFTING THIRD AXLE - INSPECTED UNTIL 10/2026 - READY FOR WORK. _____ Fgedpjzbt R Rjfx Afujh ALL VEHICLES FOR SALE CAN BE INSPECTED AND CHECKED. OUR SALES TEAM IS AVAILABLE FROM MONDAY TO FRIDAY FROM 8:30 AM TO 6:00 PM AND ON SATURDAY FROM 8:00 AM TO 12:00 PM. TO REACH US BY CAR, TAKE THE A31 MOTORWAY AND EXIT AT THIENE. BY TRAIN, GET OFF AT THE THIENE TRAIN STATION. Dealer: Trucks Italiana srl

Year of construction: 2021, condition: excellent (used), Memmert ICH 260L chamber from 2021. The unit comes with a one-year warranty on spare parts. Manufacturer's description: Temperature Operating temperature range without humidity: 0 to +60 °C Temperature setting range 0 to +60 °C Operating temperature range from +10 °C to +60 °C with humidity and/or light Temperature setting accuracy 0.1 °C Temperature sensor 2 Pt100 DIN Class A sensors in a 4-wire circuit for mutual monitoring, taking over functions in case of an error Humidity Humidity humidity supply using distilled water from an external tank via a self-priming pump Humidification humidification using a hot steam generator Humidity active humidification and dehumidification of the air, adjustable in the range of 10-80% relative humidity with a digital display of relative humidity - display resolution 0.1%, setting accuracy 0.5% Light Daylight and ultraviolet light can be programmed individually using the controller Fgedpfx Aezam Hiefujh Light cold white light +/- 6%, for UV light +/- 10% Light lighting unit consisting of 4 cold white fluorescent lamps (standard D65 lighting, 6500 K) and 2 UV lamps in the spectral range of 320-400 nm

Condition: used, Year of construction: 2000, functionality: fully functional, USED AUTOMATIC ROTARY SAW, SCORTEGAGNA RUSCH 260/320 AF, overhauled like new. READY IN STOCK Fedpfszhui Tex Afuogh

Condition: like new (used), Year of construction: 2021, operating hours: 480 h, functionality: fully functional, travel distance X-axis: 4,000 mm, travel distance Y-axis: 2,000 mm, travel distance Z-axis: 260 mm, type of input current: three-phase, sheet thickness aluminum (max.): 260 mm, operating pressure: 4,150 bar, year of last overhaul: 2025, power: 22 kW (29.91 HP), Flow Mach 200 Waterjet Cutting System for Sale For sale is a very well-maintained Flow Mach 200 waterjet cutting system, manufactured in 2021, with extremely low operating hours of only approximately 500 hours. The machine was used exclusively for single and small series production, not in multi-shift operation, and was regularly serviced by Flow. Technical data: – Working area approx. 4,000 × 2,000 mm – Z-axis approx. 200 mm – Flow HyPlex Prime 30 high-pressure pump – Max. pressure 4,150 bar Fedpey Urziofx Afuogh – PASER abrasive cutting system incl. CF900 – Pivot+ 3D cutting head with active angle compensation up to 60° – UltraPierce piercing assist – Laser edge finder – ecoFlow abrasive manual desliming system – EKOWA cutting water treatment – Steel catcher tank – Stainless steel slats (blades) Software package: – FlowCut – FlowPath – FlowXpert – FlowNest Plus office license Supported formats: DXF, DWG, STEP, IGES, STL and others Special features: – Very low wear due to low operating hours – Complete documentation available – Operator training provided – Well-maintained overall condition – Ready for immediate use Asking price: €105,000 net Inspection possible by appointment. Further pictures and information are available upon request.

Year of construction: 2007, condition: used, Offer 22111 Technical specifications: Fedpfxev S Du Re Afusgh - HADEF Type CH 2 hoist, built in 2007, load capacity 500 kg - Portal load capacity 500 kg - Hook height approx. 2450 mm - 2 lifting speeds 8.0 + 2.0 m/min - Manual trolley - Clearance between the traveling columns approx. 2750 mm - Clearance height at the bottom edge of the portal beam approx. 2900 mm - Mobile beam approx. 1500 mm - 4 swivel casters - Total width approx. 3050 mm - Total depth approx. 1500 mm - Total height approx. 3050 mm - 400 V drive - Total weight – crane + hoist approx. 250 kg

Condition: ready for operation (used), Year of construction: 2001, This 4-axis HELLER MCH 250 was manufactured in 2001. It features a robust coolant/filter unit, ensuring efficient operation. If you are looking to get high-quality machining capabilities, consider the HELLER MCH 250 horizontal machining centre we have for sale. Contact us for further details. Fgjdpsz Iyfqefx Afuoh - Voltage: 400 V (3~)- Frequency: 50 Hz- Nominal Current: 185 A

Condition: ready for operation (used), Year of construction: 2003, travel distance X-axis: 800 mm, travel distance Y-axis: 800 mm, travel distance Z-axis: 800 mm, controller manufacturer: SIEMENS, controller model: 840D, spindle speed (max.): 6,000 rpm, number of slots in tool magazine: 100, number of axes: 4, This 4-axis HELLER MCH 250 was manufactured in 2003. It features a robust X-axis travel of 800 mm, Y-axis travel of 800 mm, and Z-axis travel of 800 mm. The machine is equipped with a Siemens 840D control unit and a tool magazine with 100 positions. If you are looking to get high-quality machining capabilities, consider the HELLER MCH 250 horizontal machining centre we have for sale. Contact us for further details. Tool Holder / Taper: HSK 100Tool Magazine Positions: 100Pallet Changer: IncludedX-Axis Travel: 800 mmY-Axis Travel: 800 mmZ-Axis Travel: 800 mmB-Axis Travel: 360,000 x 0.001°Spindle Speed: 6,000 RPMMeasuring Probe: Blum probeVoltage: 400 V (3~)Frequency: 50 HzRated Current: 123 A Fsdpfoz Ir Rxjx Afusgh Technical Specification Taper Size HSK 100

Condition: ready for operation (used), Year of construction: 2002, travel distance X-axis: 800 mm, travel distance Y-axis: 800 mm, travel distance Z-axis: 800 mm, controller manufacturer: SIEMENS, controller model: 840D, spindle speed (max.): 6,000 rpm, number of slots in tool magazine: 100, number of axes: 4, This 4-axis HELLER MCH 250 was manufactured in 2002. It features a generous X, Y, and Z-axis travel of 800 mm each, along with a B-axis travel of 360,000 x 0.001°. The machine is equipped with a Siemens 840D control unit and a tool magazine with 100 positions. If you are looking to get high-quality machining capabilities, consider the HELLER MCH 250 horizontal machining centre we have for sale. Contact us for further details. Fgjdpfxez Ir Nhs Afueh Control Unit: Siemens 840DTool Holder / Taper: HSK 100Tool Magazine Positions: 100Pallet Changer: IncludedX-Axis Travel: 800 mmY-Axis Travel: 800 mmZ-Axis Travel: 800 mmB-Axis Travel: 360,000 x 0.001°Spindle Speed: 6,000 RPMMeasuring Probe: Blum probeVoltage: 400 V (3~)Frequency: 50 HzRated Current: 185 A Technical Specification Taper Size HSK 100

Condition: ready for operation (used), TETRA THERM ASEPTIC FLEX 10 UHT ASEPTIC MILK PROCESSING YOM 2004 Fgodpfx Aez Dpuyefush INCLUDING: - TETRA THERM ASEPTIC FLEX 10 PLATE STERILIZER, MODEL TA FLEX 10 PHE PLC ALLEN BRADLEY -TETRA ALEX 30 HOMOGENIZER, 2-STEPS, NON-ASEPTIC CAPACITY 8 TONS PER HOUR EXCELLENT CONDITION LOCATION - POLAND