Used Himmel 2 Ls 80 for sale (94,064)

Condition: good (used), Year of construction: 1984, Power: 800 kN Frequency: 30 - 200 rpm, adjustable by PIV gearing Stroke, adjustable: 20 - 100 mm Daylight: 500mm (max. stroke up) Ram adjustement: 75mm Size of bolster: 1.010 x 800mm Opening in bolster: 700 x 150mm Ram area: 860 x 700mm Motor power: 22 kW equipped by: - 8pc. guideways - hydraulic overload - motorized oil lubrication - motorized ram adjustment - electro pneumatic stroke adjustment with complete decoiling line make ALBA, consisting of: Decoiler Outer diameter max. 1.400mm equipped by: • Decoiler moveable hydraulic • hydraulic coil loading device • hydraulic drive Pgsdpfx Aedhzf Iji Teu • hydraulic expansion 480 - 530mm • hydraulic pressure arm, lateral adjustable by handwheel • lateral arms Straightener Type: Ma Ria 9 Width: max. 400mm Thickness: 0,5 - 5,0mm Number of pulling rolls: 2 pc., Ø 120mm, upper can be lifted by hydraulic Number of straightening rolls: 9 pc., Ø 60mm, upper rollls adjustable by hydraulic drive, all rolls supported equipped by: • hydraulic strip insertion device • lateral strip guidings at entrance • lateral strip guidings at exit • basket at exit • loop control by sensor • lateral loop guiding Roll feeder Type: Vhy 400 Width: max. 400mm Thickness: max. 5,0mm passline adjustement by hydraulic jack We can offer even only press or decoiling line

Condition: new, 50 mm 8,5 U/min Pgodpfoy H N Hmjx Ai Tou 100 kN roll diameter 162 mm Drive 1,5 kW range L-W-H 1100x800x1500 mm weight 450 kg Equipment / Accessories: - Two driven rollers - Hydraulic delivery of the upper roller - Digital display with memory function - Working position horizontal and vertical - Bearings with tapered roller bearings - Use of replaceable slide rails on the guide carriage - Footswitch - standard roller set

Condition: excellent (used), Year of construction: 2010, Very well-maintained press brake from SafanDarley. Type EHP LS 50 15 12 CL Pgedpfx Aiez S H Eao Teu Capacity: 1550 x 50 tons New Delem DA69T control system Y1, Y2, X, R, Z1, and Z2 are CNC controlled Hydraulic Wila New Standard upper clamping system Pneumatic Wila 13mm lower clamping system.

Condition: new, 50 mm 8,5 U/min 100 kN roll diameter 162 mm Drive 1,5 kW range L-W-H 1100x850x1350 mm weight 495 kg Equipment / Accessories: - Two driven rollers - Hydraulic delivery of the upper roller - Digital display with memory function - Working position horizontal and vertical - Bearings with tapered roller bearings - Use of replaceable slide rails on the guide carriage - Footswitch - standard roller set Pjdpfx Aisy H N Ikj Tjgu

Condition: excellent (used), Year of construction: 2008, Well-maintained used press brake from SafanDarley. Pgjdpjz S H Hdofx Ai Teu Type EHP LS 230 43 37 Capacity: 4300 x 230 tons New Delem DA69T control system CNC-controlled Y1, Y2, X, R, Z1, and Z2 axes Hydraulic Wila New Standard top clamp Pneumatic Wila 13mm bottom clamp.

Condition: used, mileage: 240,289 km, power: 335 kW (455.47 HP), axle configuration: 4x2, color: white, driver cabin: sleeper cab, gearing type: automatic, Year of construction: 2022, Equipment: ABS, EBS, air conditioning, For inquiries regarding the vehicle, please contact Mr. Seidel (tel. ). Mercedes-Benz Actros 1846 LS 4x2 semi-trailer tractor unit. A1C Front axle 7.5 t, A2E Rear axle, ring gear 440, hypoid, 13.0 t, A3D Rear axle with active lubrication, unstepped, A5C Axle ratio i = 2.733, B1B Electronic braking system with ABS and ASR, B2A Disc brake, on front and rear axles, B2X Parking brake, electronic, C0G Frame overhang 1050 mm, C1Y Wheelbase 3850 mm, C5A Chassis design for ADR, C5B Footplate over frame, partial covering, C5D Step, behind cab, left, D0A Leather steering wheel, D0L Smoker's package, D0S Compressed air connection, in cab, D0U Smoke detector, in cab, D1C Driver's air-suspended seat, comfort, D2Y Seat belt control, D3B Comfort bed, lower, D3Q Seat cover, velour, D4S Sun visor, 1-piece, electric, windshield, D4Z Sun visor, side, driver and passenger side, D6C Electric stationary air conditioning, D6G Automatic climate control, D6I Waste heat recovery, D6M Hot water auxiliary heating, cab, D6V Noise and heat insulation cab, D7F Stowage flaps, above windshield, one lockable, D7G Stowage compartment lid, driver and passenger side, D7I Stowage trays, for stowage compartments, D7J Drawers, under bed, D7K Drawer, under instrument panel, D7V Table, on passenger side, D7Y Luggage compartment, at top of rear wall, D8N Lifting roof, electric, D8X Low seat box, lowered by 40 mm, E4B Interface, Fleet Management System FMS, E5A Switch No. 1 for external bodywork electrics, E5B Switch No. 2 for external bodywork electrics, E5H Night driving light switch, E5K MirrorCam switch, on bed, E5X ADR type class AT, E5Z ADR accessories, fire extinguisher in stowage compartment + behind cab, E6A Trailer socket 24 V, 15-pin, E6Y Reversing warning, combined with hazard warning lights, E7F Cable remote control for air suspension, E9G Preparation for electrical equipment, E9I Preparation for switch, lift axle, semi-trailer/trailer, F1I L-cab StreamSpace, 2.50 m, flat floor, F3C Cab mounting, comfort, air-suspended, F3W Cab tilting mechanism, mechanical-hydraulic, F6D Windshield tinted, with band filter, F6I Front mirror, heated, F6Q Air horn, F6T MirrorCam, F7B Bumper, corners made of steel, F7C Bumper, center part with towing eyes, F7X Cab entry left/right, fixed, F8E Locking system, with central locking, F8F Comfort locking system, F8V Light sensor, F8W Rain sensor, G0T Predictive Powertrain Control, G0U Driving program economy, G2B Gearbox G 211-12/14.93-1.0, G5A Single-plate clutch, G5G Mercedes PowerShift 3, H2C Saddle coupling distance +600 mm, I2G Tires tubeless, 315/80 R 22.5 front/front axle/steerable axle, I2H Tires tubeless, 315/80 R 22.5 rear axle, I6X Air suspension, rear axle, J1O Tachograph digital, 2nd generation, ADR, J1S Tachograph manufacturer VDO, J2J Sound system, J2M Aux-in, in side wall compartment, right, J2U Navigation system, J2Y CB radio, 24 V, J3U Preparation for Fleetboard Manager App, J3V Truck Data Center 7, J3Z Axle load measuring device, J6C Multimedia cockpit, interactive, J6Y Remote Online, J6Z Preparation for Mercedes-Benz Truck App Portal, J8Y Preparation for Truck Data Center 7, J9D Preparation for toll collection, K2P Tank 390l+130l hydraulic oil, left, 650x700x1365 mm, aluminum, K3V AdBlue tank 60 l, left, L1A Bi-xenon headlights, L1D Automatic high/low beam and cornering lights, L1I Fog lights, LED daytime running lights, L1P LED taillights, L2H Side marker lights, flashing, L3A Work lights, lower, L3C Work lights,... Pgedpjzuriwjfx Ai Tju

Condition: new, AUMA 07.1-F10 multi-turn actuator, new -Order number: 23078028 -Serial number: 2218NS66675 Pjdpfxsz Sk N Ds Ai Tegu -PTB 01 ATEX 1119 -SKE0 56-2/80 -Article number: Z048.703 -AZ F-3-S-ISO-STD

Condition: used, Year of construction: 2009, functionality: fully functional, machine/vehicle number: 20082, type of input current: three-phase, total width: 2,000 mm, total length: 6,700 mm, input voltage: 400 V, input current: 10 A, 32 C – GERBER XLS-125-180-L Automatic Fabric Spreader – Industrial Spreading System Description For sale is a GERBER XLS-125-180-L automatic fabric spreading machine designed for high-volume textile and garment production. This industrial spreading system enables precise and efficient multi-layer fabric spreading directly onto a conveyor table. The motorized spreading carriage ensures consistent material handling, alignment, and production speed, making it suitable for demanding production environments. The machine is known as a reliable industry workhorse, capable of handling a wide range of materials from heavy denim to lightweight fabrics. The system has been operated as part of a fully integrated cutting line together with a Lectra Vectorfashion VT-FA-Q2-72 cutter (unit 35 C) and FINN-CONVEY V307 conveyor system (unit 30 C). This setup significantly improves production flow, reduces manual labor, and enables continuous high-volume operation. The machine has been used in a professional garment factory and was operational prior to factory shutdown. Recently serviced on 27.02.2026. Video available from operation (05.03.2026). The video material shows the GERBER spreading system in operation together with other cutting line equipment, including a Lectra Vectorfashion VT-FA-Q2-72 CNC cutter (unit 35 C) and a FINN-CONVEY V307 conveyor system (unit 30 C). Includes • GERBER XLS automatic spreading machine • Motorized spreading carriage • Roll holder system • Integrated touchscreen control panel • Fabric alignment and feeding system • Mounted rail system for table operation Technical Details • Manufacturer: Gerber Technology • Model: XLS-125-180-L • Year: 2009 • Serial number: 20082 • Max roll weight: 125 kg • Max roll diameter: approx. 600–650 mm Pjdpfx Ajy Alciei Tjgu • Machine weight: approx. 400 kg • Spreading width: up to 1800 mm • Speed: up to approx. 100 m/min (material dependent) • Voltage: 3 x 380–415 V • Frequency: 50/60 Hz • Current: approx. 10 A Key Features • Fully automated fabric spreading for reduced manual labor • Suitable for both rolled and folded fabrics • Precision tension control to prevent fabric distortion • Accurate edge alignment for material optimization • Touchscreen interface for easy programming and control • Integrated safety systems including emergency stop and sensors Production Advantages • High precision reduces material waste • Fast spreading significantly improves cutting room throughput • Consistent tension ensures dimensional stability of cut parts • Enables efficient multi-layer cutting preparation Maintenance & Reliability Gerber spreading systems are known for strong spare part availability and long service life. Condition Used industrial condition Fully operational prior to shutdown Recently serviced (27.02.2026) Video available from operation (05.03.2026) Typical signs of use from production environment Inspection possible prior to dismantling Sold as-is, where-is, without warranty Typical Applications • Automatic fabric spreading • Multi-layer cutting preparation • Denim and heavy fabric production • High-volume garment manufacturing • Cutting room operations Location Valga, Estonia Removal & Transport Buyer responsible for dismantling and transport Professional dismantling recommended due to system size

Condition: used, maximum load weight: 42,400 kg, overall weight: 64,000 kg, axle configuration: > 3 axles, first registration: 01/2011, Equipment: ABS, Goldhofer STZ-VLS4-37/80 and Goldhofer Dolly SX 1-25/80 - Height-adjustable low bed with removable gooseneck ----* Manufacturer: Goldhofer * Type: STZ-VLS4-37/80 * First registered: 01/2011 * Color: yellow * Total weight: 64,000 kg * Empty weight according to vehicle registration document: 21,600 kg * Axles: 4x BPW axles, of which 1st axle is steered via turntable steering, the remaining 3x axles are hydromechanical forced steering * Steering knuckle axles up to max. 45 degrees * Tires: 235/75 R17.5 approx. 70% * Suspension: Air suspension with lifting and lowering * EBS Wabco * Removable gooseneck with aluminum side walls * Hydraulic cylinders for support on the tractor unit * Toolbox with flap at the front of the gooseneck * Controls and pressure gauge on the left of the gooseneck * Gooseneck designed for freely rotating 1-axle dollies * Low bed for the chassis can be raised and lowered hydraulically * Chassis with excavator trough (starts from the 2nd axle) * Extendable widening of the loading area 440mm (2x 220mm) and 700mm (2x 350mm) * Wooden planks to bridge the gap between the widenings * Air suspension with raising and lowering to min. 825mm to 1,025mm (no driving position) * 2x fixed driving heights: * 1st driving height 925mm +100mm/-100mm * 2nd driving height 885mm +100mm/-100mm * 2 pairs of retractable lashing eyes in the gooseneck floor * 5 pairs of retractable lashing eyes in the low bed floor * 5 pairs of side lashing eyes on the low bed chassis * 4 pairs of stake holes in the low bed floor * 3 pairs of retractable lashing eyes in the chassis floor * 2 pairs of side lashing eyes on the chassis chassis * 2 pairs of stake holes in the chassis floor * 2x lashing eyes in the excavator trough * Rear of the vehicle sloped 10 degrees * 1-part hydraulic ramps (2,850mm x 720mm) and hydraulic supports at the rear * Operation of hydraulic ramps + supports at the rear left * Smartboard at the rear right * Additional LED reversing lights on the gooseneck and at the rear of the low loader * 1st hand German vehicle!! German papers!! 1st hand!! Goldhofer SX 1-25/80 Dolly ----* Manufacturer: Goldhofer * Type: SX 1-25/80 * First registered: 03/2011 * Color: Yellow Podpfox Suzaox Ai Tegu * Total weight: 28,000 kg * Empty weight according to vehicle registration document: 2,750 kg * Axles: 1x BPW axle * Tires: 235/75 R17.5 approx. 70% / twin tires * 3" fifth wheel plate * Single fender * Supports * Loading manometer * 1st hand German vehicle!! German papers!!

Condition: used, mileage: 267,365 km, power: 335 kW (455.47 HP), axle configuration: 4x2, color: white, driver cabin: sleeper cab, gearing type: automatic, Year of construction: 2022, Equipment: ABS, EBS, air conditioning, For inquiries regarding the vehicle, please contact Mr. Seidel (tel. ). Mercedes-Benz Actros 1846 LS 4x2 semi-trailer tractor unit. A1C Front axle 7.5 t, A2E Rear axle, ring gear 440, hypoid, 13.0 t, A3D Rear axle with active lubrication, unstepped, A5C Axle ratio i = 2.733, B1B Electronic braking system with ABS and ASR, B2A Disc brake, on front and rear axles, B2X Parking brake, electronic, C0G Frame overhang 1050 mm, C1Y Wheelbase 3850 mm, C5A Chassis design for ADR, C5B Footplate over frame, partial covering, C5D Step, behind cab, left, D0A Leather steering wheel, D0L Smoker's package, D0S Compressed air connection, in cab, D0U Smoke detector, in cab, D1C Driver's air-suspended seat, comfort, D2Y Seat belt control, D3B Comfort bed, lower, D3Q Seat cover, velour, D4S Sun visor, 1-piece, electric, windshield, D4Z Sun visor, side, driver and passenger side, D6C Electric stationary air conditioning, D6G Automatic climate control, D6I Waste heat recovery, D6M Hot water auxiliary heating, cab, D6V Noise and heat insulation cab, D7F Stowage flaps, above windshield, one lockable, D7G Stowage compartment lid, driver and passenger side, D7I Stowage trays, for stowage compartments, D7J Drawers, under bed, D7K Drawer, under instrument panel, D7V Table, on passenger side, D7Y Luggage compartment, at top of rear wall, D8N Lifting roof, electric, D8X Low seat box, lowered by 40 mm, E4B Interface, Fleet Management System FMS, E5A Switch No. 1 for external bodywork electrics, E5B Switch No. 2 for external bodywork electrics, E5H Night driving light switch, E5K MirrorCam switch, on bed, E5X ADR type class AT, E5Z ADR accessories, fire extinguisher in stowage compartment + behind cab, E6A Trailer socket 24 V, 15-pin, E6Y Reversing warning, combined with hazard warning lights, E7F Cable remote control for air suspension, E9G Preparation for electrical equipment, E9I Preparation for switch, lift axle, semi-trailer/trailer, F1I L-cab StreamSpace, 2.50 m, flat floor, F3C Cab mounting, comfort, air-suspended, F3W Cab tilting mechanism, mechanical-hydraulic, F6D Windshield tinted, with band filter, F6I Front mirror, heated, F6Q Air horn, F6T MirrorCam, F7B Bumper, corners made of steel, F7C Bumper, center part with towing eyes, F7X Cab entry left/right, fixed, F8E Locking system, with central locking, F8F Comfort locking system, F8V Light sensor, F8W Rain sensor, G0T Predictive Powertrain Control, G0U Driving program economy, G2B Gearbox G 211-12/14.93-1.0, G5A Single-plate clutch, G5G Mercedes PowerShift 3, H2C Saddle coupling distance +600 mm, I2G Tires tubeless, 315/80 R 22.5 front/front axle/steerable axle, I2H Tires tubeless, 315/80 R 22.5 rear axle, I6X Air suspension, rear axle, J1O Tachograph digital, 2nd generation, ADR, J1S Tachograph manufacturer VDO, J2J Sound system, J2M Aux-in, in side wall compartment, right, J2U Navigation system, J2Y CB radio, 24 V, J3U Preparation for Fleetboard Manager App, J3V Truck Data Center 7, J3Z Axle load measuring device, J6C Multimedia cockpit, interactive, J6Y Remote Online, J6Z Preparation for Mercedes-Benz Truck App Portal, J8Y Preparation for Truck Data Center 7, J9D Preparation for toll collection, K2P Tank 390l+130l hydraulic oil, left, 650x700x1365 mm, aluminum, K3V AdBlue tank 60 l, left, L1A Bi-xenon headlights, L1D Automatic high/low beam and cornering lights, L1I Fog lights, LED daytime running lights, L1P LED taillights, L2H Side marker lights, flashing, L3A Work lights, lower, L3C Work lights,... Pgjdpfx Aioztlt Ts Tju

Condition: used, Year of construction: 1979, MAN 19 280 F BREINING – Superstructure – FEDERAL Emulsion/Asphalt Spraying Unit Attention: Suitable only for emulsion, not for liquid asphalt! Control panel for the superstructure located in the driver’s cab! • Manual transmission • Differential lock • Long-distance cab • 1 sleeping berth • Leaf spring suspension • Tires: 12 R 22.5 (alternatively: 315 / 80 R 22.5) • Tank capacity: 6,000 liters of emulsion • Burner: NEW! • Spraying bar: 2 units, foldable! Errors and prior sale excepted! = Further information = Pgjdpfowmpcnox Ai Tju Fuel type: Diesel Year of manufacture: March 1979 Mileage: 67,000 km Usable material: Asphalt Damage: Damaged vehicle (not roadworthy)

Condition: used, Year of construction: 2020, - Straw blower - 2 cameras Pgedpfxsz Nbb No Ai Tou - Central lubrication system for the cutter bar - PTO shaft

Condition: excellent (used), functionality: fully functional, For sale: an industrial submersible pump, ORPU Sonel B 60/2, manufactured in Germany, with a maximum flow rate of 80,000 liters per hour. This pump is designed for draining and pumping water. Technical specifications: Brand: ORPU Model: Sonel B 60/2 Pgjdpoz Syk Asfx Ai Tou Maximum flow rate: 80 m³/h – 80,000 l/h Maximum head: 25 m Power: 5.2 kW Power supply: 400 V, three-phase Frequency: 50 Hz Manufacturer: Oranienburger Pumpen + Verdichter GmbH Country of origin: Germany The pump is equipped with a metal housing, a lower suction basket, a discharge connection with a quick-release coupling, a power cable, a float switch, and a carrying handle.

Condition: used, mileage: 242,991 km, power: 335 kW (455.47 HP), axle configuration: 4x2, color: white, driver cabin: sleeper cab, gearing type: automatic, Year of construction: 2022, Equipment: ABS, EBS, air conditioning, For inquiries regarding the vehicle, please contact Mr. Seidel (tel. ). Mercedes-Benz Actros 1846 LS 4x2 semi-trailer tractor unit. Psdpfozzlcdjx Ai Togu A1C Front axle 7.5 t, A2E Rear axle, ring gear 440, hypoid, 13.0 t, A3D Rear axle with active lubrication, unstepped, A5C Axle ratio i = 2.733, B1B Electronic braking system with ABS and ASR, B2A Disc brake, on front and rear axles, B2X Parking brake, electronic, C0G Frame overhang 1050 mm, C1Y Wheelbase 3850 mm, C5A Chassis design for ADR, C5B Footplate over frame, partial covering, C5D Step, behind cab, left, D0A Leather steering wheel, D0L Smoker's package, D0S Compressed air connection, in cab, D0U Smoke detector, in cab, D1C Driver's air-suspended seat, comfort, D2Y Seat belt control, D3B Comfort bed, lower, D3Q Seat cover, velour, D4S Sun visor, 1-piece, electric, windshield, D4Z Sun visor, side, driver and passenger side, D6C Electric stationary air conditioning, D6G Automatic climate control, D6I Waste heat recovery, D6M Hot water auxiliary heating, cab, D6V Noise and heat insulation cab, D7F Stowage flaps, above windshield, one lockable, D7G Stowage compartment lid, driver and passenger side, D7I Stowage trays, for stowage compartments, D7J Drawers, under bed, D7K Drawer, under instrument panel, D7V Table, on passenger side, D7Y Luggage compartment, at top of rear wall, D8N Lifting roof, electric, D8X Low seat box, lowered by 40 mm, E4B Interface, Fleet Management System FMS, E5A Switch No. 1 for external bodywork electrics, E5B Switch No. 2 for external bodywork electrics, E5H Night driving light switch, E5K MirrorCam switch, on bed, E5X ADR type class AT, E5Z ADR accessories, fire extinguisher in stowage compartment + behind cab, E6A Trailer socket 24 V, 15-pin, E6Y Reversing warning, combined with hazard warning lights, E7F Cable remote control for air suspension, E9G Preparation for electrical equipment, E9I Preparation for switch, lift axle, semi-trailer/trailer, F1I L-cab StreamSpace, 2.50 m, flat floor, F3C Cab mounting, comfort, air-suspended, F3W Cab tilting mechanism, mechanical-hydraulic, F6D Windshield tinted, with band filter, F6I Front mirror, heated, F6Q Air horn, F6T MirrorCam, F7B Bumper, corners made of steel, F7C Bumper, center part with towing eyes, F7X Cab entry left/right, fixed, F8E Locking system, with central locking, F8F Comfort locking system, F8V Light sensor, F8W Rain sensor, G0T Predictive Powertrain Control, G0U Driving program economy, G2B Gearbox G 211-12/14.93-1.0, G5A Single-plate clutch, G5G Mercedes PowerShift 3, H2C Saddle coupling distance +600 mm, I2G Tires tubeless, 315/80 R 22.5 front/front axle/steerable axle, I2H Tires tubeless, 315/80 R 22.5 rear axle, I6X Air suspension, rear axle, J1O Tachograph digital, 2nd generation, ADR, J1S Tachograph manufacturer VDO, J2J Sound system, J2M Aux-in, in side wall compartment, right, J2U Navigation system, J2Y CB radio, 24 V, J3U Preparation for Fleetboard Manager App, J3V Truck Data Center 7, J3Z Axle load measuring device, J6C Multimedia cockpit, interactive, J6Y Remote Online, J6Z Preparation for Mercedes-Benz Truck App Portal, J8Y Preparation for Truck Data Center 7, J9D Preparation for toll collection, K2P Tank 390l+130l hydraulic oil, left, 650x700x1365 mm, aluminum, K3V AdBlue tank 60 l, left, L1A Bi-xenon headlights, L1D Automatic high/low beam and cornering lights, L1I Fog lights, LED daytime running lights, L1P LED taillights, L2H Side marker lights, flashing, L3A Work lights, lower, L3C Work lights,...

Condition: ready for operation (used), GMN TSE 80 x 250 - 6007 spindle SN: R307943 with Siemens 1LA5073-4AB95-Z motor SN: EJ797957201009, used, in good maintained condition, 100% functional, scope of delivery as per photos. Pgedpfx Aioy Npdws Tou

Condition: ready for operation (used), GMN TSE 80 x 250 - 6007 spindle SN: R307942 with Siemens 1LA5073-4AB95-Z motor SN: EJ797957201007, used, in good condition, 100% functional, scope of delivery as per photos. Pgjdoy Npdqspfx Ai Tsu

Condition: used, Folding former, folding machine, form folding machine, profiling machine, profiling system, slat production, blind production, dryer, infrared dryer, powder coating Pgodegal A Ijpfx Ai Tou -Infrared dryer: used for powder coating slats/blinds production -Manufacturer: Himmel, type HA 5-2-9/500 -Geared motor: WEG 0.37 kW -Dimensions: 880/1050/H2200 mm -Weight: 308 kg

Condition: excellent (used), Year of construction: 2009, operating hours: 41,750 h, functionality: fully functional, clamping force: 2,800 kN, screw diameter: 55 mm, displacement volume: 404 cm³, Equipment: documentation/manual, Model: Engel Speed 280/55 Year: 2009 Screw diameter: 50 mm Pgodjyzhy Uspfx Ai Tju Injection volume: 404 ccm Screw speed: 340 rpm Injection rate: 1901 ccm/s Spec. injection pressure: 1390 bar Spec. injection pressure increased: 2025 bar Nozzle stroke: 465 mm Clamping type: Toggle Working hours: approx. 41,750 h

Condition: used, Year of construction: 2008, functionality: fully functional, overall weight: 1,470 kg, load capacity: 180 kg, arm reach: 2,700 mm, This is a used and tested industrial robot KUKA KR 210 L180-2 2000 from 2008 with KRC2 ed05 controller. The system is designed for industrial automation applications and is typically used in palletizing, heavy component handling, welding, and manufacturing. The robot features a payload capacity of 180 kg, an approximate reach of 2700 mm, and 6 axes, making it ideal for flexible heavy-duty applications. The L180 variant offers an optimized combination of payload and reach within the KR 210-2 series. Pgjdey Nfmbopfx Ai Tju

Condition: used, Year of construction: 2013, functionality: not functional, overall weight: 1,615 kg, load capacity: 180 kg, arm reach: 3,100 mm, For sale is a used KUKA industrial robot model KR 240 L180-2 2000, equipped with a (V)KRC2 ed05 controller. The 6-axis robot was manufactured in 2013 (manipulator) and 2005 (controller) and features a payload capacity of 180 kg with an extended reach of 3100 mm in the L-version. The system is intended for industrial applications such as palletizing, handling, and heavy-duty component manipulation within automated production environments. Serial numbers are 926548 for the robot and 40682 for the controller. Operating hours are unknown. Pgodpjy N Eg Iefx Ai Teu

Condition: used, Year of construction: 1967, No minimum price – guaranteed sale to the highest bidder! Loading: December 1st to December 10th. TECHNICAL DETAILS Performance data Pressure: 80 t Stroke rate: 125 strokes/min Total power requirement: 9.5 kW Machine weight: approx. 4.4 t Stroke and ram data Stroke: 20–120 mm Ram dimensions: 560 × 355 mm Ram adjustment: 72 mm Pjdpfx Aie Aa Ntns Tsgu Working area Overhang: 280 mm Table Table width: 710 mm Table depth: 560 mm EQUIPMENT UVV – accident prevention regulation

Condition: used, Gear motor, electric motor, three-phase motor, electric gear motor -3 phase motor voltage: 42/50 V -Power: 0.12 kW -Speed: 25/30 rpm -Construction: B3 angle Psdpfofitfmjx Ai Tsgu -Hollow shaft: Ø 19 x 35 mm -Protection class: IP44 -Dimensions: 390/200/H185 mm -Weight: 19 kg

Condition: ready for operation (used), Festo EMME-AS-80-S-LS-AMB servo motor 2093107 H9 SN: 3S7PLKFNKLX, used, in good condition, 100% functional, delivery as per photos. Podpfxjx Ernqo Ai Tegu

Condition: ready for operation (used), Festo EMME-AS-80-S-LS-AMB servomotor 2093107 H9, serial number: 3S7PLKFS6LL, used, in good condition, fully functional, scope of delivery as per photos. Psdox Ernwjpfx Ai Tsgu

Condition: good (used), Hinge, door hinge, folding hinge, steel hinge, side panel hinge, aluminum hinge, plug hinge, flag hinge -Hinge: Aluminum hinge, plug-in hinge Pedozk D Udspfx Ai Tjgu -Type: 2-piece, height 80 mm, see photos -Item No.: 10002174 -Quantity: 128 hinges available -Price: per piece, minimum order quantity 2 pieces. -Dimensions when folded: 80/80/H43 mm -Weight: 0.2 kg/pc.