Used Hoku Ti 105 for sale (9,996)

Condition: ready for operation (used), Baldor BSC1105-24 servo drive INPUT 3AC230V ID/No: 20405C SN: BEDBB32950, used, as-new condition, 100% functional, scope of delivery as per photos. Nwodpsy Npziefx Acfeh

Condition: ready for operation (used), Baldor DBSC1005-GAAW-2 servo drive, INPUT: DC320V, ID/No: 28826D, serial number: 4198MG20972, used, good condition, 100% functional, delivery as per photos. Nodpfx Acoy Np Dwjfjwh

Condition: ready for operation (used), Baldor DBSC1005-24-AAAW servo drive INPUT DC320V ID/No: 27991G Serial number: 4397MG16506, used, good condition, 100% functional, scope of delivery as per photos. Nedey Np Dqopfx Acfjwh

Condition: new, Sawblade tiltable 0 - 45 ° Length of the rolling table 3.200/3350 mm cutting width 1.100 mm Motor output 5,5 kW Cutting height 155 mm Cutting height at 45° 110 mm Saw blade diameter 450 mm Nodpoxmk A Tsfx Acfewh Speed 3.000/3.600/4.200 U/min. Dust suction hood 1x120 , 1x80 mm

Condition: new, 0 600 x 800 mm Motor output 15 kW 0 0,6 m³ Nsdpfx Aox Iwfmscfjwh Diameter of the motor 260 mm Dimensions (L/W/H) 1.805 x 1.118 x 1.646 mm Weight ca. 1.100 kg Hoku single-shaft shredder H 600 Compact, robust, high throughput ----- Technical manufacturer description: The H600 high-performance shredder with its flexible application options can shred all types of wood-based materials (hardwood, softwood, chipboard, MDF materials, plywood, veneer scraps, etc.) and achieves a high and, in the case of bulky materials, achieves an enormous reduction in the volume reduction of the material. The hydraulically controlled pusher feeds the wood waste to be shredded to the cutting area of the rotor and is controlled automatically and automatically and load-dependent. The high-performance electric rotor made of has a diameter of 252 mm and operates with a rotor speed of rotor speed of 85-95 rpm. The concave-ground, aggressive and 4-fold rotating knives / reversible cutting crowns are located in milled knife pockets knife pockets on special knife carriers. This highly efficient system guarantees, through the reduction of the cutting gap between the counter knife and rotor, it guarantees high throughput, low energy consumption and optimum optimised discharge of the shredded material. Clamp size (10–60 mm) depending on sieve perforation. Technical data: Hopper opening 600 x 800 mm Hopper capacity 0.6 m³ Working width of the rotor 600 mm Rotor diameter 260 mm Drive power 15 kW Rotor speed 90 rpm Number of knives: 14 pieces + 2 pieces Type and size of knives: concave/40 x 40 mm, reversible cutting crowns concave/ 30 x 30 mm, broaching knives Screen perforation: 10-60 mm connected load: 400 V +/- 5% / 50 Hz included: Switch cabinet (Rittal) with 5 m cable Electrical control (SPS Siemens) Star-delta start-up Rubber oscillating elements E-rotor with blade pockets milled into the profile Gear limit switch 1st row of knives Hold-down device on the pusher for long and large parts Large 40 x 40 mm blades for optimum material feed Very robust gearbox Special broaching blade to prevent lateral jamming ----- Price of the above mentioned machine on request! ----- Prices plus packaging and shipping, plus VAT. (technical data according to manufacturer - without guarantee !)

Condition: used, Year of construction: 2024, New demonstration machine! Particularly heavy-duty design with high dead weight for maximum smooth running • Exceptionally quiet and precise operation thanks to torsion-resistant machine housing • Large cast parallel fence with round bar guide, easy to move • Cast flywheels with rubber coating and cleaning brush • Large grey cast iron saw table, tiltable with ground and polished surface • Precise cutting height adjustment via rack and pinion with millimeter scale • Door safety switches • Self-braking motor • Two extraction ports Technical data: Table dimensions (L x W x H): 720 x 520 x 860 mm Cutting speed: 1,650 m/min Njdpfx Acewggaksfewh Weight approx. 240 kg Max. cutting height: 350 mm Max. cutting width: 520 mm Max. saw blade length: 4,260 mm Saw blade thickness min./max.: 0.5 / 0.6 mm Precision guides top/bottom Saw table tilt: 0 - 20° Machine dimensions (L x W x H): 870 x 620 x 1970 mm Location in stock:

Condition: used, Year of construction: 2025, New display machine! Including 3-axis control Nedpjwvcf Ujfx Acfjwh Programmable saw blade height adjustment Programmable saw blade tilt adjustment Programmable rip fence adjustment General features of the P 450: Sliding table made of anodized aluminum, including high-precision guide rail made from hardened and ground steel Sliding table can be locked in any position Saw blade guard with swivel-away function Extension arm with adjustable mitre stop and length compensation at 10°, 15°, 22.5°, 30°, 45° and 90° Belt change for speed adjustment accessible from above (opening in the saw table) Display for set saw blade speed Electrics and safety devices according to CE standards Technical data: Saw blade tilting: 0° to 45° Table dimensions: 1,030 x 680 mm Sliding table dimensions: 3,200 x 350 mm Cutting length with scoring unit: 3,350 mm Cutting width at rip fence: 1,100 mm Max. cutting height with 450 mm saw blade: 90°: 155 mm / 45°: 110 mm 3 speeds: 3,000, 3,600 & 4,200 rpm Motors: Main saw: 5.5 kW / 7.5 HP / 50 Hz, Scoring saw: 0.55 kW / 0.75 HP 2 extraction ports Mitre stop extendable to 3,600 mm Location:

Year of construction: 2026, condition: used, New display machine! Stationary piston compressor with refrigerant dryer, condensate drain, oil-water separator and pre-/fine filter. The universal solution with belt drive and high-quality features. Especially suitable for craftsmen. These compressors are used where compressed air quality, durability, and efficiency are essential. Long service life thanks to two-stage high-performance units with low speed, specially machined cast cylinders for minimal oil consumption and extended lifespan, high-performance valves, optimum cooling via large fan wheel, motor with overload protection, easy condensate drainage using the standard-mounted 1/2" ball valve, standard equipped with Condor pressure switch and manometer, mounted as standard on a safety pallet with anti-vibration mounts. Nodpfx Aoyw Thvecfjwh Technical data: Suction capacity 650 l/min, output capacity 520 l/min, max. pressure 10 bar, tank volume 270 l, cylinders/stages 2/2, speed 920 min-1, motor power 4 kW / 400 V, weight approx. 197 kg Location: Rieth

Condition: used, mileage: 280,000 km, power: 94 kW (127.80 HP), first registration: 07/2014, fuel type: diesel, overall weight: 2,950 kg, color: white, gearing type: mechanical, emission class: euro5, number of seats: 3, loading space length: 2,320 mm, loading space width: 1,790 mm, loading space height: 1,590 mm, Equipment: ABS, central locking, had accident, soot filter, !!!!! ENGINE FAILURE !!!!! 3-seater, power steering, 6-speed manual transmission, electric windows, radio/CD, 3-pole power connection, Euro 5, Relec Froid TR22 refrigeration unit, single door at the rear, etc. Unladen weight: approx. 1,900 kg, payload: 1,050 kg. Errors and prior sale excepted. Nwodjwik A Ujpfx Acfjh For sale to commercial businesses and for export only. !!!! Fg-6167 !!!! Key number: 34 !!!!!

Condition: new, Year of construction: 2025, Technical Data: Intake capacity: 510 l/min. Delivery capacity: 400 l/min. Maximum pressure: 10 bar Tank volume: 90 l Cylinder/stages: 2/1 Speed: 1,300 rpm Motor power: 3 kW / 400 V Nwodpfx Aohk Dfkocfeh Description: This universal compressor with V-belt drive and high-quality components is specifically designed for tradespeople and is suitable for use in environments where the quality of compressed air, durability, and efficiency are essential. Long service life thanks to high-performance units with low speeds. Safe transport and excellent stability thanks to large wheels with parking brake. Optimal cooling through a large fan wheel. An aftercooler with cooling fins ensures a low tank inlet temperature, resulting in less moisture in the compressed air. Improved efficiency through optimized units. Standard features include: Condor pressure switch Manometer Pressure regulator with water separator and Rectus quick-release coupling Motor with overload protection Location: In stock at 54634 Bitburg - immediately available -

Condition: new, Year of construction: 2024, Hoku Houfek long hole drilling machine LLB VD 20 R Top condition - Top machine - Motor 1,5/1,9 kW, Transverse displacement in Y-axis 250 mm, Longitudinal displacement X 340 mm, Vertical displacement z-axis 200 mm, 2 speeds 1,440 and 2,880 rpm. One-hand dowel drilling device with pitch 16 - 22 - 25 - 32 mm, 2 manual eccentric clamps, Njdsu Agzxjpfx Acfjwh manual digital display for drill bit height, Table dimensions 700 x 400 mm, Drill chuck max. D = 20 mm, table rotatable +/- 45°, weight approx. 345 kg immediately ex stock 54634 Bitburg Subject to prior sale,

Condition: new, Year of construction: 2025, Hoku BK119-270-10-VKK upright piston compressor with refrigerant dryer, automatic condensate drain, oil-water separator, pre- and fine filters, mounted with rubber vibration dampers on a safety pallet. Universal piston compressors with belt drive and high-quality features. Pressure vessel manufactured according to German AD 2000 regulations. Intake capacity: 650 l/min Effective delivery rate: 520 l/min Maximum pressure: 10 bar Tank volume: 270 l Nwsdjr Ig Ahepfx Acfeh Cylinders/stages: 2/2 Speed: 920 rpm Motor power: 4 kW/400 Volt Air throughput: 650 m³/h Motor power: 4 kW Machine dimensions: 1200 x 800 x 2000 mm Pressure vessel: 270 L Effective delivery volume: 520 L/min Intake volume: 650 L/min Maximum pressure: 10 bar Location: ex stock 54634 Bitburg - immediately available -

Condition: good (used), Technical data for the leveling plate: Manufacturer: Bito PRO Included in the scope of delivery: Nedsi Hkngopfx Acfswh 1x Leveling plate, used Suitable for the base plate M; which is mounted on the shelf uprights P4-P6 Material color: Sendzimir galvanized Overall width: approx. 150 mm Overall depth: approx. 105 mm Material thickness: approx. 4.00 mm Hole spacing (center to center): approx. 120 mm Weight: approx. 0.46 kg | piece

Condition: good (used), Technical data for the leveling plate: Manufacturer: Bito Included in the scope of delivery: Njdpfx Acji Hknysfswh 1x Leveling plate, used Material color: Sendzimir galvanized Overall width: approx. 140 mm Overall depth: approx. 105 mm Material thickness: approx. 1.50 mm Hole spacing (center to center): approx. 110 mm Weight: approx. 0.15 kg | per piece

Condition: good (used), Technical data for the compensating plate: Manufacturer: Bito Included in delivery: 1x Compensating plate, used Material color: Sendzimir galvanized Overall width: approx. 140 mm Overall depth: approx. 105 mm Material thickness: approx. 4.00 mm Nodpfji Hknvsx Acfowh Hole spacing (center to center): approx. 110 mm Weight: approx. 0.41 kg | per piece

Condition: good (used), Technical data for the compensating plate: Manufacturer: Bito (L) Included in the scope of delivery: 01x Compensating plate, used Nwsdsi Hkn Dopfx Acfjh Material color: Sendzimir galvanized Overall width: approx. 120 mm Overall depth: approx. 105 mm Material thickness: approx. 4.00 mm Hole spacing (center to center): approx. 95 mm Weight: approx. 0.37 kg | per piece

Condition: good (used), Technical data for the shimming plate: Nwodji Hkn Ispfx Acfjh Manufacturer: Bito (L) Included in the scope of delivery: 01x Shimming plate, used Material color: Sendzimir galvanized Overall width: approx. 120 mm Overall depth: approx. 105 mm Material thickness: approx. 1.50 mm Hole spacing (center-to-center): approx. 95 mm Weight: approx. 0.14 kg | per piece

Condition: used, Technical data for the compensation plate: Manufacturer: Bito, Type PRO Suitable for the L base plate; which is mounted on the rack uprights P1-P3. Scope of delivery includes: 01x Compensation plate, used Material color: sendzimir galvanized Nodpfex Tua Sex Acfjwh Total width: approx. 120 mm Total depth: approx. 105 mm Material thickness: approx. 0.5 mm Hole spacing (center - center hole): approx. 95 mm Weight: approx. 0.05 kg | each Your contacts in our company: Mr. Andre Evering Mr. Mario Klöver Mr. Falk Deutsch General information about the item: This item is only offered for collection. If further transport or shipping of this item is required, this will incur additional costs, which can be requested from us separately depending on the delivery location or scope of delivery.

Condition: good (used), Technical data for the compensation plate: Nedpfxoi Hknke Acfowh Manufacturer: Bito (M) Included in the scope of delivery: 1x compensation plate, used Material color: Sendzimir galvanized Overall width: approx. 150 mm Overall depth: approx. 105 mm Material thickness: approx. 1.50 mm Hole spacing (center-to-center): approx. 120 mm Weight: approx. 0.18 kg | per piece

Condition: new, 🔧 Technical specifications: • Type: 1FT7105-5AB70-1BA2 • Torque (Mo): 50 Nm • Rated torque (MN): 42 Nm • Rated power (PN): 6.60 kW • Rated current (IN): 13.0 A • Rated voltage (UIN): 326 V • Rated speed (nN): 1500 rpm • Maximum speed (nmax): 6000 rpm • Protection rating: IP67 (dust and waterproof) • Weight: 49 kg • Cooling: Self-cooled • Design: IM B5 (also available as IM V1, IM V3) with a compact, recessed flange • Encoder: Absolute encoder AS24DQI (single-turn, 24-bit) with Drive-CLiQ interface • Shaft: With keyway • Holding brake: Not present • Runout tolerance: N • Vibration level: A • Condition: New / unused • Delivery date (first procurement): 22.08.2018 • Origin: Made in Germany 💡 Special features: • Bearing as-new condition – never mounted or electrically operated • Compact design with rotatable power connector • Highly precise positioning by absolute encoder • Robust industrial housing with IP67 protection for demanding environments Nwjdpfjwuun Sox Acfsh

Condition: used, mileage: 125,689 km, power: 94 kW (127.80 HP), first registration: 04/2016, fuel type: diesel, overall weight: 2,950 kg, color: white, gearing type: mechanical, emission class: euro5, number of seats: 3, loading space length: 2,300 mm, loading space width: 1,790 mm, loading space height: 1,590 mm, Equipment: ABS, central locking, had accident, soot filter, !!!!! ENGINE NOISE/ENGINE DAMAGE!!!!! Nwjdpfx Acev Hvkgjfeh 3-seater, power steering, 6-speed manual transmission, electric windows, radio/CD player, 3-pole power connection, Euro 5, Carrier Xarios 200 refrigeration unit, single rear door, etc. Unladen weight: approx. 1900 kg, payload: 1050 kg. Errors and prior sale excepted. Subject to typos. For sale to commercial businesses and for export only. !!!! Fg-80247 !!!! Key number: 115 !!!!!

Condition: like new (used), Year of construction: 2021, operating hours: 500 h, 1050 including holder for 2 heads Nsdpfx Acerz N Imofewh The Thermo-Inkjet 1050 was designed as a low-maintenance, easy-to-use industrial printer and produces high-resolution text, logos and graphics as well as 100% error-free readable barcodes.

Condition: good (used), Heidelberg Stahlfolder Ti 52 4/4/1 Folding Machine Machine configured for folding up to 16 pages. Technical specifications: Minimum paper size: 105 x 150 mm Maximum paper size: 520 x 840 mm High stack feeding Configuration: – 4 cassettes on the first module Ti-52 – 4 cassettes on the second module 2.Ti-52 – 1 electronic knife – Mobile delivery Inverter-controlled folding speed adjustment Cassette noise reduction Becker compressor Nsdpfx Aoy Tu Nascfjwh Double sheet sensor Electronic counter with batching Electric delivery with adjustable delivery speed. Spare parts, tools, and documentation included. The machine is in good condition and ready for operation.

Condition: good (used), Heidelberg Stahlfolder Ti 52 4/4 Folding Machine Machine in very good condition, ready for operation. Technical specifications: Minimum paper size: 105 x 150 mm Maximum paper size: 520 x 840 mm High stack feeding Configuration: – 4 cassettes on the first module Ti-52 – 4 cassettes on the second module 2.Ti-52 – Mobile delivery Infinitely variable folding speed control via inverter Cassette noise reduction Compressor included Double sheet sensor Electronic counter with batching Nsdpfx Acey Sd U Asfewh Electric delivery with adjustable delivery speed. Spare parts, tools, and documentation included. Made in Germany.

Condition: like new (used), we are interessted in buying obsolete electronic components, semi conductors microprocessors, etc Nedpfx Acjizi Twefewh